summaryrefslogtreecommitdiff
path: root/src/Makefile.am
AgeCommit message (Collapse)Author
2009-04-25build: adjust use of automake's new $(AM_V_GEN) variableJim Meyering
* src/Makefile.am (dircolors.h, wheel-size.h, wheel.h, fs.h): (version.c, version.h): Use $(AM_V_GEN) only as a prefix of an existing command. Otherwise, it provokes warnings from some "make" programs. Suggestion from Ralf Wildenhues.
2009-04-25tests: fix check-AUTHORS skip logicRalf Wildenhues
* src/Makefile.am (check-AUTHORS): When this test is skipped, be sure to avoid all commands in the recipe, not just those passed to the first shell.
2009-04-24build: use automake's new $(AM_V_GEN) and $(AM_V_at) variablesJim Meyering
* src/Makefile.am (dircolors.h, wheel-size.h, wheel.h, fs.h): (version.c, version.h): Mark with $(AM_V_GEN) and $(AM_V_at), so that the latest automake prints "GEN $@" by default.
2009-04-23tests: make the check-AUTHORS test more portable, now that it's...Jim Meyering
run as part of "make check". * src/Makefile.am (check-AUTHORS): Don't depend on en_US.UTF-8. Instead, use the French UTF8 locale, if configure found one. If not found, just skip the test.
2009-04-23avoid parallel "make distcheck" failure due to two run-in-src/ rulesJim Meyering
Move the check-AUTHORS rule from "syntax-check" to "check". * maint.mk (local-checks-available): Remove check-AUTHORS. (check-AUTHORS): Remove rule. * src/Makefile.am (CLEANFILES): Add $(no_install__progs), since they too are built sometimes. (check-AUTHORS): Split a longer-than-80 sed command. (../AUTHORS): Remove obsolete rule.
2009-04-10build: tight-scope test: don't build excluded programsJim Meyering
* src/Makefile.am (sc_tight_scope): Depend on $(bin_PROGRAMS), not $(all_programs)
2009-03-27tests: fix 'make sc_tight_scope' on cygwinEric Blake
* src/Makefile.am (sc_tight_scope): Ignore leading underscores in symbols.
2009-03-11maint: remove an obsolete FIXME commentJim Meyering
* src/Makefile.am (../AUTHORS): Remove obsolete FIXME comment. There are no longer any installed *.sh programs.
2009-01-29maint: silence some syntax-check rulesJim Meyering
* cfg.mk (sc_strftime_check): Silence the rule. (sc_tight_scope): Likewise. * src/Makefile.am (check-AUTHORS): Likewise.
2009-01-29cp/mv: add xattr supportKamil Dudka
This patch was originally written by Andreas Grünbacher, nowadays available at http://www.suse.de/~agruen/coreutils/5.91/coreutils-xattr.diff * bootstrap.conf: Add gnulib module verror. * po/POTFILES.in: Add lib/verror.c. * m4/xattr.m4: Check for libattr availability, new configure option --disable-xattr. * m4/prereq.m4: Require gl_FUNC_XATTR. * src/Makefile.am: Link cp, mv and ginstall with libattr. * src/copy.h: Add preserve_xattr and require_preserve_xattr to cp_options. * src/copy.c (copy_attr_error): New function to handle errors during xattr copying. (copy_attr_quote): New function to quote file name in error messages printed by libattr. (copy_attr_free): Empty function requested by libattr to free quoted string. (copy_attr_by_fd): New fd-oriented function to copy xattr. (copy_attr_by_name): New name-oriented function to copy xattr. (copy_reg, copy_internal): Call copy_extended_attributes function. * src/cp.c (usage): Mention new --preserve=xattr option. (decode_preserve_arg): Handle new --preserve=xattr option. * src/mv.c: Always attempt to preserve xattr. * src/install.c: Never attempt to preserve xattr. * tests/misc/xattr: New test for xattr support in cp, mv and install. * tests/Makefile.am: Add the new test to list. * doc/coreutils.texi: Mention xattr support, new --preserve=xattr option. * NEWS: Mention the change.
2009-01-01portability: accommodate gnulib's getaddrinfo changeJim Meyering
* src/Makefile.am (pinky_LDADD, who_LDADD): Append $(GETADDRINFO_LIB)
2008-12-23build: do enable $(WERROR_CFLAGS) for src/ files.Jim Meyering
This reverts the more recent commit (of two) entitled "build: add configure-time --enable-gcc-warnings option; avoid warnings". Pádraig Brady spotted the contradiction between the log message and actual change. This reverts commit 292d68565a34b237cd2bf586ace545b7cd3dbfcf.
2008-12-21build: add configure-time --enable-gcc-warnings option; avoid warningsJim Meyering
* bootstrap.conf (gnulib_modules): Add "warnings" module. * configure.ac: Add --enable-gcc-warnings, derived from code in bison. * src/Makefile.am (AM_CFLAGS): Set to $(WARN_CFLAGS) # $(WERROR_CFLAGS) * lib/Makefile.am (AM_CFLAGS): Change spelling to $(WARN_CFLAGS) Don't use $(WERROR_CFLAGS), yet. * src/system.h (usage): Declare. * src/base64.c (usage): Declare to be global, for consistency. * src/timeout.c (usage): Likewise. * src/truncate.c (usage): Likewise. * src/getlimits.c (usage): Likewise. * src/pinky.c (ttyname): Declare with prototype, rather than an empty argument list. * src/who.c (ttyname): Likewise. * src/su.c (crypt, getusershell, setusershell, endusershell): Likewise.
2008-12-21build: turn on $(WERROR_CFLAGS) for src/Jim Meyering
2008-12-21build: add configure-time --enable-gcc-warnings option; avoid warningsJim Meyering
* bootstrap.conf (gnulib_modules): Add "warnings" module. * configure.ac: Add --enable-gcc-warnings, derived from code in bison. * src/Makefile.am (AM_CFLAGS): Set to $(WARN_CFLAGS) # $(WERROR_CFLAGS) * lib/Makefile.am (AM_CFLAGS): Change spelling to $(WARN_CFLAGS) Don't use $(WERROR_CFLAGS), yet. * src/system.h (usage): Declare. * src/base64.c (usage): Declare to be global, for consistency. * src/timeout.c (usage): Likewise. * src/truncate.c (usage): Likewise. * src/getlimits.c (usage): Likewise. * src/pinky.c (ttyname): Declare with prototype, rather than an empty argument list. * src/who.c (ttyname): Likewise. * src/su.c (crypt, getusershell, setusershell, endusershell): Likewise.
2008-11-21getlimits: A new utility for use in coreutils' testsPádraig Brady
* src/getlimits.c: A utility to print platform dependent limits in a format suitable for use in shell scripts. * src/Makefile.am: Add getlimits to list of utilities to build but not install. Also add it to the list linked with libiconv * po/POTFILES.in: Add getlimits to translation list.
2008-10-12tests: move check-misc targets from src/Makefile.am to maint.mkJim Meyering
* src/Makefile.am (check): Remove check-misc. (check-misc): Remove target. * maint.mk (sc_prohibit_stat_st_blocks): New target. (sc_prohibit_S_IS_definition): New target. * Makefile.am (EXTRA_DIST): Add .x-sc_prohibit_stat_st_blocks. * .x-sc_prohibit_stat_st_blocks: New file. Andreas Schwab reported that "make check" could fail to detect violation of the no-S_IS*-definition policy.
2008-09-22fix installation with ./ginstall in srcRalf Wildenhues
* src/Makefile.am (cu_install_program): New variable, set to either ./ginstall or @INSTALL_PROGRAM@ (for cross compilation). (INSTALL_PROGRAM): Override AC_SUBST unconditionally, to avoid warning, and wrong initialization order.
2008-09-14various VPATH-related fixesRalf Wildenhues
* maint.mk (VC_LIST): Prepend '$(srcdir)/'. (patch-check): Fix to make it work with a VPATH build. * src/Makefile.am (sc_tight_scope): Likewise. * man/Makefile.am (.x.1): Do not make outputs unwritable.
2008-09-10simplify installation rules, using new AutomakeRalf Wildenhues
This relies on development Automake to provide multi-file installation, and avoids relying on undocumented Automake interfaces. It also removes special-casing for `['. * configure.ac (AM_INIT_AUTOMAKE): Depend on 1.10a. (CROSS_COMPILING): New Automake conditional. * src/Makefile.am (install-exec-am, filtered_PROGS) (d_bindir, cu-install-binPROGRAMS): Remove. (INSTALL_PROGRAM) [!CROSS_COMPILING]: Set to `./ginstall'.
2008-08-26generate version.c and version.hJim Meyering
* src/Makefile.am (version.c, version.h): New rules. Generate. (nodist_libver_a_SOURCES): Define * .gitignore: Add src/version.c and src/version.h. (DISTCLEANFILES): Add version.c and version.h.
2008-08-26use new global, "Version", rather than macro, VERSIONJim Meyering
With this change, a version-string update no longer forces recompilation of 100+ src/*.o files. * src/version.c (Version): New global. New file. * src/version.h: Declare it. * src/Makefile.am: Put it in a library that everyone links to. (noinst_LIBRARIES, libver_a_SOURCES): Define. (LDADD): Add libver.a. (sc_tight_scope): Use perl (was sed), and a more relaxed regexp to build the global-variable-name-recognizing regexp list. * src/system.h: Include "version.h". (case_GETOPT_VERSION_CHAR): Use Version rather than VERSION. * src/basename.c (main): Use Version rather than VERSION. * src/chroot.c (main): Likewise. * src/cksum.c (main): Likewise. * src/dd.c (main): Likewise. * src/dirname.c (main): Likewise. * src/echo.c (main): Likewise. * src/hostid.c (main): Likewise. * src/hostname.c (main): Likewise. * src/link.c (main): Likewise. * src/logname.c (main): Likewise. * src/nice.c (main): Likewise. * src/nohup.c (main): Likewise. * src/printenv.c (main): Likewise. * src/printf.c (main): Likewise. * src/pwd.c (main): Likewise. * src/setuidgid.c (main): Likewise. * src/sleep.c (main): Likewise. * src/sync.c (main): Likewise. * src/test.c (main): Likewise. * src/timeout.c (main): Likewise. * src/true.c (main): Likewise. * src/tsort.c (main): Likewise. * src/unlink.c (main): Likewise. * src/uptime.c (main): Likewise. * src/users.c (main): Likewise. * src/whoami.c (main): Likewise. * src/yes.c (main): Likewise.
2008-08-06expr: support arbitrary-precision arithmeticJames Youngman
* src/Makefile.am (expr_LDADD): Link expr against GNU MP. * doc/coreutils.texi (expr invocation): Describe --bignum, --no-bignum. Explain the new arbitrary-precision functionality. * NEWS: Indicate that arbitrary-precision arithmetic is now supported in expr. * src/expr.c (enum valtype): Added mp_integer, signifying a GNU MP number. (usage): Document the new options --bignum and --no-bignum which force and prohibit the use of arbitrary-precision arithmetic, respectively. (long_options): data structure for getopt_long, which we need to use to parse the options mentioned above. (main): parse these options with getopt_long instead of parse_long_options. (valinfo): Downgrade the numeric member of the union from intmax_t to signed long, since MP lacks functions for promoting an intmax_t to an arbitrary-precision quantity. (enum arithmetic_mode): Represents the current choice between --bignum, --no-bignum and the default (automatically switch from one to the other if needed). (integer_overflow): issue a more explicit error message indicating that MP is not available. (string_too_long): new function, emits a fatal error message for the case where an argument to the 'index' expression is too long for a string offset to be represented. (int_value): With --bignum, create the value as mp_integer rather than plain integer. (substr_value): factored out of eval6; implements "substr". (freev): also destroy mp_integer values. Check that no mp_integer values exist if --no-bignum was specified. (printv, null, tostring): support mp_integer. (toint): new funtion for converting from string or mp_integer to integer. (getsize): extracts a size_t value from a VALUE object; used to implement substr. (promote): promotes a value from integer to mp_integer. (domult, dodivide): functions for multiplication and division, factored out of eval4. (doadd): addition/subraction function, factpred out of eval3. (eval3): support mp_integer types; call doadd. (eval4): support mp_integer types; call domult, dodivide. (eval6): support mp_integer offsets and lengths for "substr" and "index". * TODO: Mention that expr supports arbitrary-precision arithmetic, and suggest that this might also be a good idea for seq. * AUTHORS (expr): Add James Youngman.
2008-08-01ls: --color now highlights files with capabilities, tooKamil Dudka
* src/ls.c: [HAVE_CAP] Include <sys/capability.h>. (has_capability): New function for capability detection. (print_color_indicator): Colorize file with capability. * m4/jm-macro.m4: New configure option: --disable-libcap. Check for libcap usability. * src/Makefile.am (dir_LDADD, ls_LDADD, ...): Append $(LIB_CAP). * src/dircolors.c: Update color lists. * src/dircolors.hin: Mention new CAPABILITY color attribute. * tests/ls/capability: Test for ls - colorize file with capability. * tests/Makefile.am (root_tests): Add ls/capability. * NEWS: Mention the change.
2008-08-01factor arbitrarily large numbersJames Youngman
* m4/gmp.m4: New file; adds cu_GMP, which detects GNU MP. * configure.ac: Use cu_GMP. * src/Makefile.am: Link factor against libgmp if available. * src/factor.c: Use GNU MP if it is available. (emit_factor, emit_ul_factor, factor_using_division, factor_using_pollard_rho, extract_factors_multi, sort_and_print_factors, free_factors): new functions for the arbitrary-precision implementation, taken from an example in GNU MP. (factor_wheel): Renamed; was called factor. (print_factors_single): Renamed; was called print_factors. (print_factors): New function, chooses between the single- and arbitrary-precision algorithms according to availability of GNU MP and the length of the number to be factored. (usage, main): New options --bignum and --no-bignum. * coreutils.texi (factor invocation): Document new command-line options for the MP implementation and update the performance numbers to take into account the asymptotically faster algorithm. * TODO: Remove item about factoring large primes (it's done). * m4/gmp.m4: Add support for --without-gmp. * NEWS: Mention the new feature.
2008-07-04install with just-built ./ginstall only when not cross-compilingJim Meyering
* src/Makefile.am (install-exec-am): ...otherwise, use the default value, $(INSTALL_PROGRAM). Reported by Brian Silverman.
2008-06-09enforce the proper_name_utf8-requires-ICONV link ruleJim Meyering
* maint.mk (sc_proper_name_utf8_requires_ICONV): New rule. * src/Makefile.am (timeout_LDADD, truncate_LDADD): Add $(LIBICONV).
2008-06-06Add new program: truncatePádraig Brady
* AUTHORS: Register as the author * NEWS: Mention this change * README: Add truncate command to list * src/truncate.c: New command * src/Makefile.am: Add truncate command to list to build * src/.gitignore: Add truncate binary to list to ignore * doc/coreutils.texi (truncate invocation): Add truncate info * man/Makefile.am: Add truncate man page to list to build * man/truncate.x: Add truncate man page template * po/POTFILES.in: Add truncate to list to translate * tests/Makefile.am: Add truncate tests * tests/misc/help-version: Add support for new truncate command * tests/misc/truncate-dangling-symlink: check dangling link ok * tests/misc/truncate-dir-fail: ensure dirs fail * tests/misc/truncate-fail-diag: validate messages for missing paths * tests/misc/truncate-fifo: ensure fifos ignored * tests/misc/truncate-no-create-missing: ensure -c option honoured * tests/misc/truncate-overflow: check signed integer overflows * tests/misc/truncate-owned-by-other: root permissions check * tests/misc/truncate-parameters: check invalid parameter combinations * tests/misc/truncate-relative: check invalid relative sizes
2008-06-02new program: timeoutPádraig Brady
* AUTHORS: Register as the author. * NEWS: Mention this change. * README: Add timeout command to list. * src/timeout.c: New file. * src/kill.c (operand2sig): Move function to its own file, now that timeout.c will also use it. * src/operand2sig.c (operand2sig): New file, extracted from kill.c. * src/operand2sig.h (operand2sig): Declare. * src/Makefile.am (EXTRA_PROGRAMS): Add timeout. * src/.gitignore: Add timeout binary to list to ignore. * doc/coreutils.texi (timeout invocation): Add timeout info. (Signal specifications): New section, also referenced by kill. * man/Makefile.am (timeout.1): Add dependency. * man/timeout.x: New file. * po/POTFILES.in: Add timeout.c and operand2sig.c to list to translate. * tests/Makefile.am (TESTS): Add the two new tests. * tests/misc/help-version: Add support for new timeout command. * tests/misc/invalid-opt: Add support for new timeout command. * tests/misc/timeout: New file: check basic timeout operation. * tests/misc/timeout-parameters: New file: check invalid parameter combinations.
2008-05-31install: reenable matchpathcon-related codeJim Meyering
The underlying performance problem is being dealt with in Automake by limiting the number of install invocations, and in SELinux with incremental changes as well as a potential new implementation. * src/Makefile.am (ginstall_CPPFLAGS) [ENABLE_MATCHPATHCON]: Define. * src/install.c [ENABLE_WHEN_MATCHPATHCON_IS_MORE_EFFICIENT]: Rename to ENABLE_MATCHPATHCON. * NEWS: mention this change
2008-05-26install many binaries at once, when possibleJim Meyering
* src/Makefile.am (install-exec-am): Override the standard automake-generated target, so we can decide whether to use the usual install-one-by-one rule, or whether we can use the new install-many-at-once rule: (cu-install-binPROGRAMS): New rule.
2008-05-26adjust AUTHORS and check-AUTHORS rule to accommodateJim Meyering
* AUTHORS: Add coding: utf-8 comment at end. Spell François' and Torbjörn's names properly. * src/Makefile.am: Parse AUTHORS file more carefully. Use perl to join now-split lines. Use en_US.UTF-8 to generate --version output.
2008-05-26use gnulib's proper_name_utf8 function, but *not* proper_nameJim Meyering
* bootstrap.conf (gnulib_modules): Add propername. (XGETTEXT_OPTIONS): Add options to tell xgettext about the functions. * src/cat.c, src/cp.c, src/df.c, src/du.c, src/split.c: Mark Torbjörn Granlund's name. * src/ptx.c: Mark François Pinard's name. Use "TRANSLATORS:" comment marker, rather than "Note to translators:". * src/system.h: Include propername.h. (proper_name): Define away. * src/Makefile.am (cat_LDADD, df_LDADD, du_LDADD, ptx_LDADD, split_LDADD): Initialize, so we can... (cat_LDADD, cp_LDADD, df_LDADD, du_LDADD, ptx_LDADD, split_LDADD): ...Use "+=" to append $(LIBICONV) for each program that uses proper_name_utf8.
2008-04-12Avoid link failure when using mkstemp replacement.Jim Meyering
* src/Makefile.am (tac_LDADD): Add $(LIB_CLOCK_GETTIME). This is necessary at least on a DEC Alpha OSF/1 4.0F.
2008-03-10install, rmdir: write --verbose output to stdout, not to stderr.Ondřej Vašík
* src/install.c (announce_mkdir): Write verbose output to stdout, not to stderr. * src/mkdir.c (announce mkdir): Use prog_fprintf for verbose output. * src/prog-fprintf.c (prog_fprintf): New function and file. * src/prog-fprintf.h: New file. * src/rmdir.c (main): Write verbose output to stdout, not to stderr. Quote directory name in a diagnostic. * src/rmdir.c (remove_parents): Write verbose output to stdout, not to stderr. * doc/coreutils.texi: Mention that shred verbose output is to stderr. * NEWS: Mention the changes. Signed-off-by: Ondřej Vašík <ovasik@redhat.com>
2008-03-10make syntax-check: also check src/*.h files for extern functions,Jim Meyering
* src/Makefile.am (sc_tight_scope): ... now that there is one.
2008-03-01Don't skip the groups-version test.Jim Meyering
* tests/Makefile.am (built_programs): Remove unused definition. * src/Makefile.am (built_programs.list): Print a space-separated list of program names, not NL-separated, since all clients now expect a space-separated list.
2008-02-13Replace groups.sh with groups.c.James Youngman
* src/groups.c (main): New file, replacing groups.sh. * src/group-list.c, src/group-list.h: New files, factored out of id.c, implementing the functionality that "id" and "groups" have in common. * src/id.c (print_full_info): Avoid a segfault when trying to print an error message if getgroups fails. (print_group_list): Move to group-list.c. (print_group): Likewise. * man/Makefile.am: When building groups.1, obtain the help text from src/groups.c, not src/groups.sh. (noinst_HEADERS): Add group-list.h. (group): Remove rule. (dist_man_MANS): Remove groups.1. * doc/coreutils.texi (groups: Print group names a user is in): Explain why "groups" and "groups $(id -un)" give different results in existing login sessions after you change the group database. (id: Print user identity): Likewise for "id". * po/POTFILES.in: Add src/group-list.c and src/groups.c. * NEWS: mention this. * AUTHORS: Update.
2008-01-26Add a ";", so "make install" works with --enable-install-program=su.Zvi Har'El
* src/Makefile.am (install_su): Add a semicolon.
2008-01-08Remove uses of now-undefined Makefile variable.Jim Meyering
* src/Makefile.am (dir_LDADD, ls_LDADD, vdir_LDADD): Remove uses of no-longer-defined variable, $(LIB_ACL_TRIVIAL).
2007-12-02Remove just-installed su, if unable to make it set-UID root.Jim Meyering
Normally, su isn't even installed. However, if you configure with --enable-install-program=su, and then install with insufficient privileges, we now make sure to remove the just-installed binary. * src/Makefile.am (install-exec-hook): Rename from install-exec-local, so that this rule is guaranteed to be run *after* installation. If unable to chown and chmod the installed "su" program, remove it. Reported by Greg Schaefer.
2007-11-16Port to Solaris 'make' and use a Posixish shell on Solaris.Jim Meyering
* bootstrap.conf (gnulib_modules): Add gnu-make, posix-shell. * build-aux/check.mk (SHELL): Set to $(PREFERABLY_POSIX_SHELL), so that commands can assume Posix syntax. (ENABLE_HARD_ERRORS, TEST_LOGS): Don't use GNU Make's "?=" syntax. (SH_E_WORKAROUND): New macro. (am__check_pre, $(TEST_SUITE_LOG)): Use it. (am__check_pre): Fail if "mkdir" fails. Use $(SHELL) rather than relying on the "#!/bin/sh" in the file, so that tests can use Posix syntax. (am__check_pre, am__tty_colors): Use $$src rather than $$<, to support the Posix-make $(TEST_LOGS) rule. (%.log: %.test, %.log: %$(EXEEXT)): Remove unused inference rules that rely on a GNU Make extension and cause Solaris 'make' to fail. (SUFFIXES): New macro, so that we can use Posix style inference rules. (%.log: %): Use this rule only if GNU_MAKE. Set $$src so that macros can use $$src rather than $$<. (CHECK-FORCE, DEPENDENCY, $(TEST_LOGS)): New macros and rules, which rely only on Posix 'make' semantics, and are used only with non-GNU 'make' implementations. $(TEST_LOGS) invokes 'make' recursively (and a bit inefficiently) to simulate the GNU 'make' rules. (.log.html): Renamed from "%.html: %.log", so that it relies only on Posix 'make' semantics. (check-clean, .PHONY): Do not depend on check-clean-local, since Solaris 'make' complains about nonexistent rules like that. * src/Makefile.am (SUFFIXES): Remove; no longer needed. (groups): Use a specific rule rather than an inference rule that is only instantiated once. The inference-rule approach does not work with Solaris 'make', which gets confused by the "groups: Makefile" line. It's not clear from the Posix spec that Solaris 'make' is buggy here, so instead of worrying about it, rewrite the makefile so that it clearly conforms to Posix. * tests/check.mk (TESTS_ENVIRONMENT): Export PACKAGE_BUGREPORT. GNU 'make' does this automatically for us, but Solaris 'make' doesn't. 2007-11-15 Paul Eggert <eggert@cs.ucla.edu>
2007-10-09Now that we don't install su, don't make misleading suggestions.Jim Meyering
* src/Makefile.am (install-exec-local) [$(INSTALL_SU) != yes]: Don't suggest running "make install-root". (uninstall-local) [$(INSTALL_SU) != yes]: Don't even check the installed binary.
2007-10-07New program: mktemp.Jim Meyering
* NEWS: Mention this. * README: Add mktemp to the list. * AUTHORS: Add this: mktemp: Jim Meyering * src/mktemp.c: New file. * src/Makefile.am (bin_PROGRAMS): Add mktemp. (mktemp_LDADD): Add $(LIB_GETHRXTIME). * man/mktemp.x: New file. * man/Makefile.am (dist_man_MANS): Add mktemp.1. (mktemp.1): New dependency. * man/.cvsignore: Add mktemp.1. * man/.gitignore: New file. * src/.cvsignore, src/.gitignore: Add mktemp. * tests/misc/mktemp: New file. * tests/misc/Makefile.am (TESTS): Add mktemp. * tests/Coreutils.pm (run_tests): Give the POST-test function access to stdout and stderr contents, so it can verify that the named-on-stdout file/dir does indeed exist and has proper permissions, etc. [po/ChangeLog] * POTFILES.in: Add src/mktemp.c.
2007-09-01Ensure that snapshot version changes make it to groups, too.Jim Meyering
* src/Makefile.am (groups): Depend on Makefile.
2007-08-30Use PACKAGE_NAME instead of GNU_PACKAGE.Eric Blake
* src/Makefile.am (.sh, uninstall-local): Adjust all users of hand-rolled GNU_PACKAGE to instead use autoconf-provided PACKAGE_NAME. * src/basename.c (main): Likewise. * src/chroot.c (main): Likewise. * src/dirname.c (main): Likewise. * src/echo.c (main): Likewise. * src/expr.c (main): Likewise. * src/factor.c (main): Likewise. * src/groups.sh (version): Likewise. Also, reflect change in --version output due to GPLv3. * src/hostid.c (main): Likewise. * src/hostname.c (main): Likewise. * src/link.c (main): Likewise. * src/logname.c (main): Likewise. * src/nice.c (main): Likewise. * src/nohup.c (main): Likewise. * src/printenv.c (main): Likewise. * src/printf.c (main): Likewise. * src/pwd.c (main): Likewise. * src/setuidgid.c (main): Likewise. * src/sleep.c (main): Likewise. * src/system.h (case_GETOPT_VERSION_CHAR): Likewise. * src/test.c (main): Likewise. * src/true.c (main): Likewise. * src/unlink.c (main): Likewise. * src/uptime.c (main): Likewise. * src/users.c (main): Likewise. * src/whoami.c (main): Likewise. * src/yes.c (main): Likewise. * configure.ac (AC_CHECK_DECLS): No need to check strtoimax, strtoumax, since gnulib does this.
2007-08-28By default, do not install hostname anymore; no kidding, this time.Jim Meyering
* src/Makefile.am (EXTRA_PROGRAMS): Remove hostname from this list, now that it's no longer being installed by default. This should have been part of the 2007-08-21 change. (check-duplicate-no-install): New rule to ensure this doesn't happen again. (check): Depend on it.
2007-08-23Move functions from copy.c into new modules, since ln needs them, too.Jim Meyering
* bootstrap.conf (gnulib_modules): Add file-set. * gl/lib/file-set.c (record_file, seen_file): Functions from copy.c. * gl/lib/file-set.h: Add prototypes. * gl/lib/hash-triple.c (triple_hash, triple_hash_no_name): (triple_compare, triple_free): Functions from copy.c. * gl/lib/hash-triple.h (struct F_triple): Define. From copy.c. Add prototypes. * gl/modules/file-set: New module. * gl/modules/hash-triple: New module. * src/Makefile.am (copy_sources): New variable. (ginstall_SOURCES, cp_SOURCES, mv_SOURCES): Use it. * src/copy.c: Include hash-triple.h. No longer include hash-pjw.h. (copy_internal): Don't pass a NULL third argument to record_file, since that function no longer accepts that. (record_file): Move this function to file-set.c. Along the way, remove the code to allow a NULL stat-buffer pointer. Adjust sole caller. (seen_file): Move this function to file-set.c. (struct F_triple): Move declaration to hash-triple.h. (triple_compare, triple_free, triple_hash, triple_hash_no_name): Move these functions to hash-triple.c. Signed-off-by: Jim Meyering <jim@meyering.net>
2007-08-21By default, do not install hostname anymore.Jim Meyering
* configure.ac: Add "hostname" to the list of not-installed programs. * src/Makefile.am (no_install__progs): Add "hostname" here, too. * NEWS: Mention this.
2007-07-23Update all copyright notices to use the newer form.Jim Meyering
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-15 06:35:03 +0000