| Age | Commit message (Collapse) | Author |
|---|
|
On some systems, -Wunused-macros would warn about two macros:
src/factor.c:148:0: warning: macro "__clz_tab" is not used
src/factor.c:126:0: warning: macro "UHWtype" is not used
* src/factor.c: Add a use to placate gcc.
|
|
When building the new make-prime-list program on a system for which
strerror is defined to rpl_strerror, we'd get a link failure.
The problem is that we're including <config.h> for some definitions,
but do not want the rpl_ ones, since this particular program must
not be linked against gnulib (aka libcoreutils.a). This did not
arise on Fedora 17 or 18, but did on Debian wheezy/sid.
* src/make-prime-list.c (strerror): #undef.
Build failure introduced by commit v8.19-152-gcf67e4c.
|
|
* src/factor.c (print_factors_single): Use fputs and umaxtostr
rather than printf with "%ju". This reduced the time required
to compute and print the factors of the first 10^7 integers from
over 8 seconds to 5.75s. Run this command:
seq $((10**7)) | env time factor > /dev/null
|
|
* src/factor.c: Renamed from factor-ng.c, with the following changes:
Adjust copyright header to be consistent with others.
Use xmalloc and xrealloc, to avoid segv upon OOM.
Switch back to using readtokens to handle input.
Diagnose invalid inputs.
s/fprintf+exit/error/
(print_factors): Add comments.
(strto2uintmax): Return strtol_error, not int.
(read_item): Remove, no longer used.
(main): Use atexit(close_stdout) so that we don't ignore failed write.
* cfg.mk: Exempt src/longlong.h from several tests.
Exempt run.sh from the test-list-consistency test.
Exempt make-prime-list.c from numerous tests, since we won't
be making it conform: it must not link with libcoreutils.a.
Exempt factor-ng.c from the no-upper-case error message test.
* AUTHORS (factor): Add Torbjörn and Niels.
* tests/local.mk (factor_tests): Encode the 37 tests.
($(factor_tests)): Rule to generate a test script for each test.
* tests/factor/run.sh: New script, marked as very expensive.
* .gitignore: Ignore new generated files.
* src/local.mk (src/primes.h): New rule.
(noinst_PROGRAMS): Add make-prime-list.
(noinst_HEADERS): Add longlong.h.
Remove all wheel-related rules and files.
* src/wheel-gen.pl: Remove file.
maint: mark set-but-not-used variables with ATTRIBUTE_UNUSED
* src/factor-ng.c (redcify, prime_p, isqrt2): Mark them, so we
don't have to disable -Wunused-but-set-variable.
maint: use __builtin_expect only if __GNUC__
* src/factor-ng.c (LIKELY, UNLIKELY) [__GNUC__]: Add #ifdef guard.
build: avoid warning about unused macro
* src/factor-ng.c (__GMP_DECLSPEC): Don't define here
* src/longlong.h (__GMP_DECLSPEC): Define if not already defined.
|
|
* src/factor-ng.c: Import some improvements from
http://gmplib.org:8000/factoring
Co-authored-by: Torbjörn Granlund <tg@gmplib.org>
|
|
* src/factor-ng.c: New file, from nt-factor.
* src/longlong.h: New file.
* NEWS (Improvements): Mention the upcoming improvements.
Co-authored-by: Niels Möller
|
|
* src/make-prime-list.c: Insert spaces before parens.
(main): Abort if the 8-delta value ever exceeds 255.
|
|
Even though this is just a helper program that is run solely to create
primes.h, it should not ignore a write failure. Normally we would
simply call atexit (close_stdout), but we cannot do that from this
helper program, since it must be built before the generated header,
primes.h. If we were to make the linking of make-prime-list depend
on libcoreutils.a, that would add all lib/*.o files to the list
of dependents of $(BUILT_HEADERS). Then, since there is currently no
provision to ensure that a file like lib/stdio.h (another built header)
is built before the first lib/*.o file that also includes <stdio.h>,
some lib/*.o files would be built before lib/stdio.h and some after.
The former would provoke link failures due to undefined rpl_* functions.
* src/make-prime-list.c: Include <errno.h>.
(fclose): Undef, so that a definition to rpl_fclose does not
cause a link failure.
(main): Per the above, in this exceptional case, we check for fclose
and ferror failure manually, and don't worry about the ferror-only
failure case in which errno may not be relevant.
|
|
* src/make-prime-list.c: Include <config.h>.
(binvert): Add _GL_ATTRIBUTE_CONST.
|
|
* src/make-prime-list.c: New file, from nt-factor.
Co-authored-by: Niels Möller <nisse@lysator.liu.se>
|
|
* src/local.mk: Remove the above dependency.
A soon-to-be-added new program, make-prime-list, must not depend
on that, since it is used to create a BUILT_SOURCES file.
That dependency is already handled via the ..._LD_ADD variables,
and so that redundant dependency has so far been harmless.
|
|
On some systems (notably, BSD-based, like at least OpenBSD 4.9),
the me_type member does not come from the heap.
* src/du.c (fill_mount_table): Free the ->me_type member only
when it was malloc'd, i.e., when ->me_type_malloced is nonzero.
Bug introduced via commit v8.19-2-gcf7e1b5.
Reported as http://bugs.gnu.org/12542.
|
|
* src/nice.c (usage): s/Nicenesses/Niceness values/
|
|
* src/nice.c (usage): Specify the entity (process) that
that relative terms are referring to.
* THANKS: Update.
Reported-by: David Diggles
|
|
The --no-preserve=mode option did not do what its name implies:
it would mistakenly preserve permission mode bits.
* NEWS: Mention the fix.
* TODO: Remove an entry.
* src/copy.c (copy_reg): Add a condition to properly
handle the --no-preserve=mode option for files
(copy_internal): Add a condition to properly handle the
--no-preserve=mode option for directories.
* src/copy.h (struct cp_options): Add a new boolean.
* src/cp.c (cp_option_init,decode_preserve_arg): Set the
new boolean value according to specified options.
* src/install.c (struct cp_options): Initialize the new boolean.
* src/mv.c (struct cp_options): Initialize the new boolean.
* tests/cp/preserve-mode.sh: Add a new test.
* tests/cp/link-preserve.sh (-a --no-preserve=mode): Adjust the
expected perms: now, --no-preserve=mode overrides the --preserve=mode
that is inherent in -a, as it should.
* tests/local.mk: Add the new test to the list.
|
|
This was originally attempted in commit v8.12-117-g5a647a0,
but reverted before release because of the unreliability
of disabling core dumps using setrlimit() on Linux kernels.
This new version instead uses prctl() where available to
more reliably disable core dumps for the timeout process.
* m4/jm-macros.m4: Define HAVE_SETRLIMIT and HAVE_PRCTL.
* src/timeout.c (disable_core_dumps): A new function
that disables coredumps using prctl or setrlimit if available.
(main): If the child exited with a signal and we can
disable core dumps, then raise that signal to the timeout
process itself, so that callers may also see the signal status.
Also print a message indicating when the monitored command
dumped core, as that information is lost in the signal
propagation through timeout.
|
|
* src/dd.c (STATUS_NONE): A new bitmask combining all STATUS_
options, thus used to suppress all informational output.
(struct symbol_value statuses): Expose the "none" option,
corresponding to the STATUS_NONE bitmask above.
(print_stats): Return early if STATUS_NONE is specified.
Also move the call to gethrxtime() down so that it's only
called when needed.
(usage): Describe the new options.
* doc/coreutils.texi (dd invocation): Likewise.
* NEWS: Mention the new feature.
* tests/dd/misc.sh: Ensure the new option works.
|
|
Teach tail -f that it must use polling on vmhgfs file systems, and
let stat -f --format=%T report the file system type name, "vmhgfs".
* src/stat.c (human_fstype): Add a case: vmhgfs, 0xbacbacbc, remote.
* NEWS (Improvements): Mention it.
* THANKS.in: Update.
Reported by Daniel Tschinder in http://bugs.gnu.org/12461.
|
|
* src/remove.c (excise): The change in commit v8.19-107-gccbd3f3 made
the "rm -rf D" (for unreadable dir, D) diagnostic worse on Solaris 10:
-rm: cannot remove 'D': Permission denied
+rm: cannot remove 'D': File exists
That happened because unlinkat would fail with EEXIST there, given
an unreadable directory, which made the two tests, tests/rm/unread2
and tests/rm/unreadable fail. Accommodate the EEXIST case, too.
|
|
The renaming from BLOCKS to N was done in v8.15-38-g140eca1,
and documentation for N was added again in v8.17-26-g4f2e9d5
without noticing that. Now, finally remove the word BLOCKS
from the documentation.
* src/dd.c (usage): Remove the word BLOCKS.
* doc/coreutils.texi (dd invocation): Likewise.
Improved by: Bernhard Voelker <mail@bernhard-voelker.de>
|
|
When listing a directory containing dangling symlinks,
and not outputting a long format listing, and orphaned links
are set to no coloring in LS_COLORS, then the symlinks
would get no color rather than reverting to the standard
symlink color. The issue was introduced in v8.13-19-g84457c4
* src/ls.c (print_color_indicator): Use the standard method
to check if coloring is specified for orphaned symlinks.
The existing method would consider 'or=00' or 'or=0' as significant
in LS_COLORS. Even 'or=' was significant as in that case the
string='or=' and the length=0. Also apply the same change
for missing symlinks for consistency.
(gobble_file): Remove the simulation of linkok, which is only
tested in print_color_indicator() which now handles this directly
by keying on the LS_COLORS values correctly.
* tests/misc/ls-misc.pl: Add a test case.
* THANKS: Add the reporter.
* NEWS: Mention the fix.
Reported-by: David Matei
|
|
* src/seq.c (main): Adjust the initial arbitrary precision
seq_fast enablement checks to be more maintainable, and
a little more general, by allowing single character
separators to use seq_fast.
Also check again after the number arguments are processed,
to see if we can still use seq_fast, which while not
allowing arbitarly large integers, it will handle
integers of the form 10E10 etc.
(seq_fast): Use a specified separator character,
rather than hardcoding '\n'.
|
|
Handle non-negative whole numbers robustly and efficiently when
the increment is 1 and when no format-changing option is specified.
On the correctness front, for very large numbers, seq now works fine:
$ b=1000000000000000000000000000
$ src/seq ${b}09 ${b}11
100000000000000000000000000009
100000000000000000000000000010
100000000000000000000000000011
while the old one would infloop, printing garbage:
$ seq ${b}09 ${b}11 | head -2
99999999999999999997315645440
99999999999999999997315645440
The new code is much more efficient, too:
Old vs new: 55.81s vs 0.82s
$ env time --f=%e seq $((10**8)) > /dev/null
55.81
$ env time --f=%e src/seq $((10**8)) > /dev/null
0.82
* seq.c (incr): New function, inspired by the one in cat.c.
(cmp, seq_fast): New functions, inspired by code in nt-factor
by Torbjörn Granlund and Niels Möller.
(trim_leading_zeros): New function, without which cmp would malfunction.
(all_digits_p): New function.
(main): Hoist the format_str-vs-equal_width check to precede first
treatment of operands, and insert code to call seq_fast when possible.
* NEWS (Bug fixes): Mention the correctness fix.
(Improvements): Mention the speed-up.
* tests/misc/seq.pl: Exercise the new code.
Improved by: Bernhard Voelker.
http://thread.gmane.org/gmane.comp.gnu.coreutils.general/3340
|
|
* bootstrap.conf (gnulib_modules): Use the new module.
(bootstrap_post_import_hook): Invoke prefix-gnulib-mk.
* configure.ac (AC_CONFIG_FILES): Remove lib/Makefile.
* lib/Makefile.am: Renamed...
* lib/local.mk: ...to this.
* src/local.mk (CLEANFILES): Append, don't set.
(noinst_LIBRARIES): Likewise.
(AM_CPPFLAGS): Don't set this here.
* Makefile.am (AM_CPPFLAGS): Define here instead.
(noinst_LIBRARIES, CLEANFILES, MOSTLYCLEANDIRS, MOSTLYCLEANFILES):
Initialize here, so we can append to them from each included local.mk
(SUBDIRS): Remove "lib".
|
|
* src/local.mk (AM_CFLAGS): Don't use $(WARN_CFLAGS) here.
* cfg.mk (src_CFLAGS, lib_CFLAGS, gnulib-tests_CFLAGS): Define here
instead.
(AM_CFLAGS): Augment using the above.
* configure.ac: Note that the configure-time option,
--enable-gcc-warnings now functions only when using GNU make.
Well, currently it does still work in gnulib-tests, but that should
soon be fixed.
Improved-by: Stefano Lattarini
|
|
The multiple-precision factoring code (with HAVE_GMP) was copied from
a now-obsolete version of GMP that did not pass proper arguments to
the mpz_probab_prime_p function. It makes that code perform no more
than 3 Miller-Rabin tests only, which is not sufficient.
A Miller-Rabin test will detect composites with at least a probability
of 3/4. For a uniform random composite, the probability will actually
be much higher.
Or put another way, of the N-3 possible Miller-Rabin tests for checking
the composite N, there is no number N for which more than (N-3)/4 of the
tests will fail to detect the number as a composite. For most numbers N
the number of "false witnesses" will be much, much lower.
Problem numbers are of the form N=pq, p,q prime and (p-1)/(q-1) = s,
where s is a small integer. (There are other problem forms too,
involving 3 or more prime factors.) When s = 2, we get the 3/4 factor.
It is easy to find numbers of that form that cause coreutils' factor to
fail:
465658903
2242724851
6635692801
17709149503
17754345703
20889169003
42743470771
54890944111
72047131003
85862644003
98275842811
114654168091
117225546301
...
There are 9008992 composites of the form with s=2 below 2^64. With 3
Miller-Rabin tests, one would expect about 9008992/64 = 140766 to be
invalidly recognized as primes in that range.
* src/factor.c (MR_REPS): Define to 25.
(factor_using_pollard_rho): Use MR_REPS, not 3.
(print_factors_multi): Likewise.
* THANKS.in: Remove my name, now that it will be automatically
included in the generated THANKS file.
|
|
* src/nproc.c (main): Error if any non option parameters.
* NEWS: Mention the change in behavior.
|
|
* src/stat.c (human_fstype): Add a case: vzfs, 0x565A4653 (local).
Reported by Jens Rosenboom in http://bugs.gnu.org/12356
* NEWS (Improvement): Mention it.
|
|
* src/remove.c (excise): Tighten the test for when we defer to an
old errno value: instead of relying solely on an FTS_DNR (unreadable
directory) failure, also test current and replacement errno values.
This change would also have solved the problem addressed by commit
v8.19-106-g57dd067. For more info, see http://bugs.gnu.org/12339#113
|
|
These commands would evoke an invalid diagnostic:
$ mkdir d && ln -s d s && env rm -r s/
rm: cannot remove 's': Too many levels of symbolic links
remove.c was stripping trailing slashes from "s/" before passing
the name to "rm". But a trailing slash may change the semantics,
and thus should not be stripped.
* src/remove.c (rm_fts): Do not strip trailing slashes.
* tests/rm/v-slash.sh: Adapt to new expected output.
* gnulib: Update to latest, for an improved fts.c that merely
normalizes trailing slashes.
Reported by Paul Eggert in discussion of http://bugs.gnu.org/12339
|
|
* src/local.mk (built_programs.list, all_programs.list): These.
|
|
* tests/Makefile.am (check-local): Here, by making this depend
on 'vc_exe_in_TESTS' ...
(check): ... rather than making this depend on them. While the old
usage worked, it relied on an implementation detail rather than on
documented behavior.
* src/local.mk (check-local): Similarly, make this depend on
'check-README' and 'check-duplicate-no-install' ...
(check): ... rather than on this.
|
|
* src/touch.c (usage): Indent --time=... to line up with all of the
other long options.
|
|
* src/local.mk (AM_CPPFLAGS): Add 'src' to the directories that
are searched for #include'd files.
|
|
The code deciding which coreutils programs to build (depending on
defaults, system capabilities, and user requests) is overly complex
and rather confusing. Let's begin simplifying it by removing some
non-strictly-necessary indirection variables.
* configure.ac: Adjust and improve few comments.
(OPTIONAL_BIN_PROGS, OPTIONAL_PKGLIB_PROGS): Rename ...
(bin_PROGRAMS, pkglibexec_PROGRAMS): ... like these, respectively.
Ensure they aren't initialized in all Makefiles (which would lead
to spurious errors), by calling AM_SUBST_NOTMAKE on them.
* src/local.mk: Adjust and improve few comments.
(bin_PROGRAMS, pkglibexec_PROGRAMS): Simply define
to the corresponding '@substitution@'.
|
|
* src/.gitignore: Here, adding the '.dirstamp' file generated
by the C compilation rules.
|
|
Some of them can be simplified after the previous changes, some
of them have been downright broken by them, and need fixing.
* src/local.mk: Adjust some comments.
(EXTRA_DIST): Avoid SPACE-TAB sequences.
(src/dircolors.h, src/fs.h src/fs-is-local.h): Avoid 8-SPACES
indentation.
(_sc_check-AUTHORS): Move ...
* cfg.mk (sc_check-AUTHORS): ... here (superseding the old rule
with the same name, that was just a recursive invocation to it).
Adjust the paths of the invoked coreutils programs, to account
for the fact that this rule now runs in the top-level build dir,
not in the 'src/' subdir. Other minor cosmetic adjustments.
(ALL_RECURSIVE_TARGETS): Remove 'sc_option_desc_uppercase' and
'sc_man_file_correlation', since they no longer entail any
recursive make invocation.
(sc_option_desc_uppercase): Remove dependency from $(all_programs):
it isn't actually needed.
(check-programs-vs-x): Likewise. Also, fix heading comments to
truly reflect what this check does.
(all-progs-but-lbracket): Strip the 'src/' prefix from each entry
in the list of programs; this avoids a spurious failure in the
'check-programs-vs-x' recipe.
(.PHONY): No need to list targets 'sc_man_file_correlation' and
'sc_option_desc_uppercase': they are automatically declared phony
by 'maint.mk', being recognized as syntax checks.
|
|
* src/local.mk (dist-hook): Don't use this to ensure all the
programs, even the ones disabled by default or by the user, are
built (doing so is required to ensure the distributed manpages
are properly built). This would build those programs too late
anyway, causing errors like:
$ make dist
make dist-xz am__post_remove_distdir='@:'
make[1]: Entering directory `~/src/coreutils'
GEN man/arch.1
help2man: can't get '--help' info from man/arch.td/arch
make[1]: *** [man/arch.1] Error 127
make[1]: Leaving directory `~/src/coreutils'
make: *** [dist] Error 2
Instead, ...
* man/local.mk (extra_man_x, extra_man_1): define these ...
($(extra_man_1)): ... and make this depend on $(all_programs).
(EXTRA_DIST): Adjust.
Adjust some comments as well.
|
|
* Makefile.am (SUBDIRS): Remove 'src'. Ensure '.' is listed before
'tests' and 'gnulib-tests'.
(dist-hook): Adjust: we must now tweak the top-level Makefile.in
in $(distdir), not the one in the 'src/' subdir (which is gone).
(include): The '$(top_srcdir)/src/local.mk' file.
* build-aux/gen-lists-of-programs.sh: Adjust the generation of the
automake input fragment.
* tests/Makefile.am (.built-programs): Adjust.
* cfg.mk (all_programs): Remove this convenience rule; it's no
longer needed, now that we can rely directly on the contents of
$(all_programs).
(sc_option_desc_uppercase, check-programs-vs-x:): Adjust lists
of prerequisites accordingly.
(all-progs-but-lbracket): Simplify definition accordingly.
* configure.ac ($OPTIONAL_BIN_PROGS): Adjust definition.
($OPTIONAL_PKGLIB_PROGS): Likewise.
($NO_INSTALL_PROGS_DEFAULT): Tweak definition, for consistency.
(AC_CONFIG_FILES): Remove 'src/Makefile'.
* src/Makefile.am: Rename ...
* src/local.mk: ... like this, with a lot of adjustments. In
addition ...
(all_programs): ... remove this now-unneeded convenience target.
|
|
This is in preparation of future changes. Still, this patch
leaves the build system in a better shape; true, with more
indirections, but also with less convoluted and brittle hacks.
Unfortunately, this commit also makes some rebuild rules
incomplete; that will son be fixed by follow-up patches.
* build-aux/gen-lists-of-programs.sh: New, generates autoconf
and automake input fragments that define "lists" of all coreutils
programs, with further distinctions about how and when these
programs should be built (by default; if the system is capable
enough; only if the user asks for them explicitly). This is
useful to avoid duplicating the definitions of these lists among
several files (at least 'configure.ac' 'src/Makefile.am'); such
duplication had proved a source of inconsistencies and bugs in
the past. And the pre-existing way to avoid such duplication,
as implemented in 'configure.ac' before this patch, was overly
complex and brittle.
* Makefile.am (EXTRA_DIST): Distribute the new script.
* bootstrap.conf (bootstrap_post_import_hook): Run the new script
to generate 'm4/cu-progs.m4' and 'src/cu-progs.mk'.
* .gitignore: Ignore those files.
* configure.ac: Include 'm4/cu-progs.m4', and decidedly simplify
most of the program lists definition and processing accordingly.
* src/Makefile.am: Similarly include 'src/cu-progs.mk', containing
definition of variables $(default__progs), $(no_install__progs)
and $(build_if_possible__progs). Accordingly ...
(no_install__progs, build_if_possible__progs): ... remove.
(EXTRA_DIST): Adjust definition.
Adjust a comment.
|
|
* src/Makefile.am (fs-def): Here: it's not portable to some non-GNU
make implementations.
|
|
* src/Makefile.am (fs-kernel-magic, fs-magic): Here, instead of
inlining its expansion "LC_ALL=C sort".
|
|
* src/Makefile.am (editpl): This.
|
|
For example, instead of factoring out the extra linker flags needed
by 'cp', 'mv' ind 'install' into a '$(copy_LDADD)' variable, factor
them out in a '$(copy_ldadd)' variable.
Partly a minor cleanup, partly a preparation for future changes.
* src/Makefile.am (copy_LDADD): Rename ...
(copy_ldadd): ... like this.
(remove_LDADD): Rename ...
(remove_ldadd): ... like this.
All uses adjusted. Some comments updated.
|
|
This change enables tail -f to use inotify and lets
stat -f --format=%T report the file system type name, "zfs".
* src/stat.c (human_fstype): Add a case: zfs, 0x2fc12fc1.
* NEWS (Improvements): Mention it.
* THANKS.in: Update.
Reported by Raimonds Miltins in http://bugs.gnu.org/12301.
|
|
* src/df.c (get_header): Mark two "%s-%s" strings for translation
and give translators a hint what each is for.
|
|
The format used is the BSD traditional format which looks like:
MD5 (/dev/null) = d41d8cd98f00b204e9800998ecf8427e
* NEWS: Add new feature info.
* doc/coreutils.texi (md5sum invocation): Add detailed information
about the new --tag option.
* src/md5sum.c: Add the new --tag option for BSD-style output.
(bsd_split_3): Add ESCAPED_FILENAME parameter.
(print_filename): New function refactored from main().
(filename_unescape): New function refactored from split_3().
* tests/misc/md5sum-bsd: Add tests for the new feature.
|
|
* src/remove.c (prompt): Hoist the computation of is_empty, since we'll
need it slightly earlier.
Before, this function would arrange to fail with EISDIR when processing
a directory without --recursive (-r). Adjust the condition to exempt
an empty directory when --dir has been specified.
Improve comments.
* tests/rm/d-3: New file, to ensure that rm -d -i dir works.
* tests/Makefile.am (TESTS): Add it.
* NEWS (Bug fixes): Mention it.
* THANKS.in: Update.
Reported by Michael Price in http://bugs.gnu.org/12260
|
|
Before this change, a directory cycle induced by a bind mount
would be treated as a fatal error, i.e., probable disk corruption.
However, such cycles are relatively common, and can be detected
efficiently, so now du emits a descriptive warning and arranges
to exit nonzero.
* NEWS (Bug fixes): Mention it.
* src/du.c: Include "mountlist.h".
(di_mnt): New global set.
(di_files): Rename global from di_set, now that there are two.
(fill_mount_table): New function.
(hash_ins): Add DI_SET parameter.
(process_file): Look up each dir dev/ino pair in the new set.
(main): Allocate, initialize, and free the new set.
* tests/du/bind-mount-dir-cycle: Add a test for the fix.
* tests/Makefile.am (TESTS): Add it.
* THANKS.in: Update.
This implements the proposal in http://bugs.gnu.org/11844.
Originally reported in http://bugs.debian.org/563254 by Alan Jenkins
and more recently as http://bugzilla.redhat.com/836557
Improved by: Jim Meyering
|
|
This also fixes a free-memory-read (FMR) bug: when fillbuf's realloc
of buf->buf frees the buffer into which saved_line.text points,
the processing of that just-read longer line includes comparison
against the saved line in freed memory.
* src/sort.c (overlap): Remove.
(fillbuf): Do not try to copy saved lines, as that is too risky
in the presence of parallelism, reallocated buffers, etc.
(sort): Invalidate any saved line before sorting a new batch.
|
