| Age | Commit message (Collapse) | Author |
|---|
|
* bootstrap.conf, src/base64.c, src/cat.c, src/cksum.c:
* src/head.c, src/md5sum.c, src/od.c, src/split.c, src/sum.c:
* src/tac.c, src/tail.c, src/tee.c, src/tr.c, src/wc.c:
Adjust to renaming of the xsetmode module to xbinary-io,
and of the xsetmode function to xset_binary_mode.
|
|
This fixes a bug noted by Eric Blake. Code was using xfreopen to
change files to binary mode, but this fails for stdout when in
append mode. Such code should use xsetmode instead. This affects
only the port on platforms like MS-Windows which distiguish text
from binary I/O.
* bootstrap.conf (gnulib_modules):
Remove xfreopen and add xsetmode. Sort.
* src/base64.c (main):
* src/cat.c (main):
* src/cksum.c (cksum):
* src/head.c (head_file, main):
* src/md5sum.c (digest_file):
* src/od.c (open_next_file):
* src/split.c (main):
* src/sum.c (bsd_sum_file, sysv_sum_file):
* src/tac.c (tac_file, main):
* src/tail.c (tail_file):
* src/tee.c (tee_files):
* src/tr.c (main):
* src/wc.c (wc_file): Use xsetmode, not xfreopen.
|
|
* src/force-link.h: Don't include headers already included by system.h
* src/force-link.c: Likewise. Also include system.h and
explicitly mark extern functions as such.
|
|
If the file B already exists, commands like 'ln -f A B' and
'cp -fl A B' no longer remove B before creating the new link.
Instead, they arrange for the new link to replace B atomically.
This should fix a race condition reported by Mike Crowe (Bug#25680).
* NEWS, doc/coreutils.texi (cp invocation, ln invocation):
Document this.
* bootstrap.conf (gnulib_modules): Add symlinkat.
* src/copy.c, src/ln.c: Include force-link.h.
* src/copy.c (same_file_ok): It's also OK to remove a destination
symlink when creating symbolic links, or when the source and
destination are on the same file system and when creating hard links.
* src/copy.c (create_hard_link, copy_internal):
* src/ln.c (do_link):
Rewrite using force_linkat and force_symlinkat, to close a window
where the destination temporarily does not exist.
* src/cp.c (main): Do not set x.unlink_dest_before_opening
merely because we are in link-creation mode.
* src/force-link.c, src/force-link.h: New files.
* src/local.mk (copy_sources, src_ln_SOURCES): Add them.
* tests/cp/same-file.sh: Adjust test case to match fixed behavior.
|
|
The race is unlikely, as timeout(1) needs to receive a signal
in the few operations between waitpid() returning and exit().
Also the system needs to have reallocated the just released pid
in this time window.
Previously we never disabled the signal handler that sent
the termination signal to the "child" pid. However once waitpid()
has reaped the child, the system is free to allocate that pid,
so we must ensure we don't process any further signals.
* build-aux/gen-lists-of-programs.sh: Build timeout(1) optionally...
* configure.ac: ...predicated on sigsuspend() being available.
* src/timeout.c (block_cleanup): A new function to ensure the
cleanup() handler is disabled after waitpid has returned.
(main): Use sigsuspend() to wait with cleanup() enabled but
disabled once it returns, and thus disabled for the waitpid() call.
(monitored_pid): Change to the more accurate pid_t.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/25624
|
|
* src/tail.c (check_fspec): Only enable printing of the file header
if we've actually read some data and this is a new file. Also
move printing of the file header to...
(dump_remainder): ...here, to allow printing only when data read.
* tests/tail-2/overlay-headers.sh: A new test for suspension
and resumption of tail.
* tests/local.mk: Reference the new test.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/23539
|
|
* src/tail.c (recheck): Set f->ignore before we
use it to show the appropriate error.
* tests/tail-2/retry.sh: Ensure the "giving up" message
is not presented.
|
|
* src/copy.c (punch_hole): Work around an empty definition
of HAVE_FALLOCATE which leads to a build error of:
"error: #if with no expression"
That was triggered by the inclusion of <linux/fs.h> in
commit v8.25-68-g89e1fef with kernel-headers-2.6.18.
Reported by Nelson H. F. Beebe
|
|
* src/local.mk (cu_install_program): Replace @INSTALL_PROGRAM@
with @INSTALL@ when cross-compiling; missed in commit 477a1e8e.
Message-Id: <20170125163329.5690-1-manolis837@gmail.com>
Copyright-paperwork-exempt: Yes
|
|
* src/dircolors.hin: Match *.{wim,swm,dwn,esd}
|
|
* bootstrap: s/time stamp/timestamp/.
* old/fileutils/NEWS: Likewise.
* src/tail.c: Avoided a long line.
|
|
Problem reported by Paul Wise for Debian, in:
https://bugs.debian.org/851934
This is fallout from the fix for GNU Bug#23035.
* src/date.c (batch_convert): New args TZ and TZSTRING.
All uses changed.
(batch_convert, main): Adjust to parse_datetime2 API change.
(main): Allocate time zone object.
* tests/misc/date-debug.sh: Fix incorrect test case,
caught by the fix.
* tests/misc/date.pl: Test the fix.
|
|
* NEWS:
* doc/coreutils.texi (Time conversion specifiers)
(Options for date, Examples of date): Document this.
* src/date.c (rfc_email_format): Rename from rfc_2822_format.
All uses changed.
(usage, long_options): Support --rfc-email.
|
|
A lot of this is converting http: to https:.
Also, gmane went away, so remove URLs that no longer work and
are not easy to figure out what they were.
Some of this stuff is so old that it no longer matters anyway.
|
|
|
|
* src/stty.c (apply_settings): A new function refactored
from main() that is used to both check and apply options.
(main): Call apply_settings before we open the device,
so all validation is done before interacting with a device.
* NEWS: Mention the improvement.
* tests/misc/stty.sh: Add a test case.
|
|
Run "make update-copyright" and then...
* gnulib: Update to latest with copyright year adjusted.
* tests/init.sh: Sync with gnulib to pick up copyright year.
* bootstrap: Likewise.
* tests/sample-test: Adjust to use the single most recent year.
|
|
* src/wc.c (wc): Avoid reading the end of the file
when the size is not a multiple of PAGE_SIZE,
as the special case handling for files in /proc and /sys
is only required when st_size is 0 or a multiple of PAGE_SIZE.
* tests/misc/wc-proc.sh: Add a test case.
|
|
* src/wc.c (main): Reset fstatus[0].failed between files when reusing
the fstatus[0] entry in --files-from0 mode. This ensures a stat() is
done for each file, avoiding incorrect counts and redundant reading.
* NEWS: Mention the bug fix.
* tests/misc/wc-files0.sh: Add a test case.
Fixes http://bugs.gnu.org/23073
|
|
* src/factor.c (factor_using_pollard_rho): Handle trivial factor g = n.
(factor_using_pollard_rho2): Handle trivial factor g1 = n1, g0 = n0.
* tests/misc/factor.pl: Add a test case.
Fixes http://bugs.gnu.org/25135
|
|
* src/factor.c (gcd2_odd): Fix the case a1 == 0, a0 == 0.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/25135
|
|
* src/od.c (usage): SIZE is that of float, not integer.
|
|
* src/head.c (elide_tail_bytes_file): Ensure we don't use
st_size unless we've previously used seek() to determine
the CURRENT_POS in the seekable file.
This was seen to cause issue on FreeBSD 11 when the pipe
buffer was filled with `yes | head --lines=-0`, in which
case st_size was 64KiB while ST_BLKSIZE() was 4KiB.
Reported by Assaf Gordon.
|
|
... in the case where two or more directories nested in each other are
created and each of them defaults to a different SELinux context.
* src/install.c (make_ancestor): When calling defaultcon(), give it the
same path that is given to mkdir(). The other path is not always valid
wrt. current working directory.
* src/mkdir.c (make_ancestor): Likewise.
* NEWS: Mention the bug fix.
Reported at https://bugzilla.redhat.com/1398913
|
|
This was detected with ASAN, but can also be seen without ASAN with:
$ tac - - <&-
tac: standard input: read error: Bad file descriptor
*** Error in `tac': malloc(): memory corruption: 0x...
* src/tac.c (copy_to_temp): Don't close our output stream on
(possibly transient) output error, or on input error.
(temp_stream): clearerr() on the stream about to be reused,
to ensure future stream use is not impacted by transient errors.
* tests/misc/tac-2-nonseekable.sh: Add a test case.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/25041
|
|
Reproduced under UBSAN with `tail -f <&-` giving:
tail.c:2220:18: runtime error: load of value 190,
which is not a valid value for type ‘_Bool'
* src/tail.c (tail_file): Ensure f->ignore is initialized
in all cases where we can't tail the specified file.
* tests/tail-2/follow-stdin.sh: Add a test case which
checks stderr has no UBSAN warnings.
Fixes http://bugs.gnu.org/25041
|
|
Update with the results from:
kgit='https://git.kernel.org/cgit/linux/kernel/git'
wget -q $kgit/torvalds/linux.git/plain/include/uapi/linux/magic.h \
-O src/fs-latest-magic.h
make src/fs-magic-compare
* src/stat.c (human_fstype): Add entries for:
BALLOON_KVM, CGROUP2, DAXFS, ZSMALLOC.
|
|
* src/longlong.h: Sync from gmp repo incorporating:
Protect umul_ppmm with do ... while (0)
Replace obsolete ARC asm 'J' constraints with 'Cal'
Provide umul_ppmm for riscv64
|
|
glibc has changed the public define
from _STRING_ARCH_unaligned to _STRING_INLINE_unaligned as per
https://sourceware.org/bugzilla/show_bug.cgi?id=19462
* gl/lib/rand-isaac.c: Cater for both defines.
* gl/lib/randread.c: Likewise.
* src/system.h: Update commented out code.
|
|
* src/numfmt.c (main): Don't implicitly coerce pointer in bool
initializer. Although it's portable C99 code, it's confusing.
|
|
This was detected with:
echo a > a; pr "-S$(printf "\t\t\t")" a -m a > /dev/null
Resulting in ASAN triggering:
====================================================
ERROR: AddressSanitizer: global-buffer-overflow
READ of size 1 at 0x00000041b622 thread T0
#0 0x40506a in print_sep_string ../src/pr.c:2241
#1 0x407ec4 in read_line ../src/pr.c:2493
#2 0x40985c in print_page ../src/pr.c:1802
#3 0x40985c in print_files ../src/pr.c:1618
#4 0x4036e0 in main ../src/pr.c:1136
* src/pr.c (init_parameters): Ensure we only override the
specified separator when it's a single tab, thus matching
the calculated separator length.
* tests/pr/pr-tests.pl: Add a test case.
* NEWS: Mention the fix.
|
|
* src/ptx.c (fix_output_parameters): Ensure line_width doesn't
go negative, which can happen when the --width is less
than the --gap-size.
* tests/misc/ptx-overrun.sh: Add a test case that triggers
with ASAN. (Note the longer filename is needed to trigger).
Fixes http://bugs.gnu.org/25011
|
|
* src/readlink.c (usage): Mark the --quiet/--silent option as active
by default.
* doc/coreutils.texi (readlink invocation): Likewise.
|
|
ASAN reported this error for: split -n2/3 /dev/null
ERROR: AddressSanitizer: negative-size-param: (size=-1)
#0 0x7f0d4c36951d in __asan_memmove (/lib64/libasan.so.2+0x8d51d)
#1 0x404e06 in memmove /usr/include/bits/string3.h:59
#2 0x404e06 in bytes_chunk_extract src/split.c:988
#3 0x404e06 in main src/split.c:1626
Specifically there would be invalid memory access
and subsequent processing if the chunk to be extracted
was beyond the initial amount read from file (which is
currently capped at 128KiB). This issue is not in a
released version, only being introduced in commit v8.25-4-g62e7af0
* src/split.c (bytes_chunk_extract): The initial_read != SIZE_MAX
should have been combined with && rather than ||, but also this
condition is always true in this function so remove entirely.
* tests/split/b-chunk.sh: Add a test case.
Fixes http://bugs.gnu.org/25003
|
|
In recent commit v8.25-93-g7fc7206 we used the f->remote flag
which wasn't set in all cases. This was detected with
ASAN giving this error when reading f->remote;
runtime error: load of value 190,
which is not a valid value for type '_Bool'
* src/tail.c (fremote): Query the system even without inotify.
(recheck): Always set f->fremote for valid files.
|
|
Installing with -j2 or greater could result in a failure like
/bin/sh: line 29: /P/bin/install: Permission denied
when /P/bin/install specifies your PATH-selected install program.
This would arise because we're using "install" to install all
man/*.1 files, and that command would run concurrently with the one
that installs "/P/bin/install" itself. We would run this command:
"src/ginstall src/ginstall /P/bin/install", and it would result
in intervals during which the destination file does not exist,
is empty or incomplete and not executable. We addressed this
problem long ago for installation of actual binaries by telling the
installation rules to use our just-built bin/ginstall (only when not
cross-compiling) rather than the PATH-resolved "install" program.
This change is to do the same for those .1 files.
* src/local.mk (INSTALL): Override automake's default of something
like "INSTALL = /P/bin/install -c".
(INSTALL_PROGRAM): Now that we set INSTALL, there is no longer any
need to set this derived variable. Its default definition,
"INSTALL_PROGRAM = ${INSTALL}" does what we require.
Improved by Eric Blake.
|
|
Problem reported by Marcel Böhme (Bug#24996).
* configure.ac (WERROR_CFLAGS): Avoid -Wtype-limits.
* src/pr.c (col_sep_string): Now a const pointer. All uses changed.
(integer_overflow): New function.
(separator_string, main, init_parameters, init_store_cols):
Check for integer overflow.
(align_column, read_line, print_stored): Avoid integer overflow.
|
|
* src/comm.c (total_option): Add bool variable for the new option.
(TOTAL_OPTION): Add enum value.
(long_options): Add array element for the new option.
(usage): Document the new option here.
(compare_files): Count the lines in total[3], and output the summary at
the end.
(main): Accept the new option.
* doc/coreutils.texi (comm invocation): Document it.
* tests/misc/comm.pl: Test it. While at it, improve the test data
to have 1 unique line in the first file, 2 unique lines in the second
file, and 3 common lines.
* NEWS (New Features): Mention the new option.
Fixes http://bugs.gnu.org/24929
|
|
This provides better alignment when some names are quoted,
which also provides better indication that quotes are not
part of the name.
* src/ls.c (align_variable_outer_quotes): A new variable
set when ls is aligning columns (not using -m, non-zero -w),
and has a variable quoting style (shell, shell-escape, c-maybe).
(quote_name_buf): Writes to buffer rather than FILE,
taking care to avoid data copying if possible. Refactored from...
(quote_name): ...here. This now manages the buffer passed
to quote_name_buf() and outputs the padding, colors and name
in the appropriate order, while managing the --dired offsets.
(get_color_indicator): A new function to return the color sequence,
refactored from...
(print_color_indicator): ...here. This now simply outputs.
(print_dir): Refactor common parts to quote_name().
(clear_files): Reset the flag indicating at least one
file is quoted in the current directory.
(needs_quoting): A new function to indicate at the scan stage
whether a name needs quoting. Called from...
(gobble_file): ...here, until we find the first quoted file.
(print_name_with_quoting): Mostly refactored to quote_name().
* tests/ls/quote-align.sh: A new test for various output formats.
* tests/local.mk: Reference the new test.
* NEWS: Mention the improvement.
|
|
Note we don't support the --algorithm option of the
b2sum command in the external BLAKE2 project, as that
was deemed too confusing for users.
"BLAKE2b" was chosen as the default algorithm to use,
which is single threaded but performs well on 64 bit.
* src/blake2: CC0 source copied from external project.
* cfg.mk[VC_LIST_ALWAYS_EXCLUDE_REGEX]: Exclude blake2/
from syntax checks, make update-copyright, etc.
* src/local.mk: Reference the sources for b2sum,
and set the compilation flags.
* doc/coreutils.texi (b2sum invocation): Reference the
md5sum invocation node, and add descriptions of -l.
* tests/misc/b2sum.sh: Add new test.
* tests/local.mk: Reference new test.
* AUTHORS: Add new binary.
* README: Likewise.
* build-aux/gen-lists-of-programs.sh: Likewise.
* man/.gitignore: Likewise.
* scripts/git-hooks/commit-msg: Likewise.
* man/b2sum.x: New man page template.
* man/local.mk: Reference new template.
* src/.gitignore: Ignore new binaries.
* src/blake2/.gitignore: Ignore new build atrifacts.
* src/md5sum.c (usage): Describe the new -l option.
* NEWS: Mention the new program.
|
|
* src/copy.h (cp_options): Add a new flag for install(1).
* src/copy.c (copy_internal): For cp, also output remediation
advice which also indicates why directories aren't copied by default.
The message is unchanged for install(1).
* src/cp.c (cp_option_init): Init install_mode to false.
* src/mv.c (cp_option_init): Likewise.
* src/install.c (cp_option_init): Init install_mode to true.
* tests/install/basic-1.sh: Add a test case.
* tests/cp/link-deref.sh: Adjust test case.
Fixes http://bugs.gnu.org/24958
|
|
* src/dircolors.hin: Add .mjpg and .mjpeg multimedia files.
This resolves http://bugs.gnu.org/24436.
|
|
This reduces a standard coreutils install size by about 160K.
* src/cat.c: Change to proper_name() which removes about 18K text.
* src/cp.c: Likewise.
* src/df.c: Likewise.
* src/du.c: Likewise.
* src/getlimits.c: Likewise.
* src/realpath.c: Likewise.
* src/split.c: Likewise.
* src/stdbuf.c: Likewise.
* src/timeout.c: Likewise.
* src/truncate.c: Likewise.
* src/local.mk: Remove -llibiconv from the above programs.
* cfg.mk (sc_check-AUTHORS): Adjust to use factor(1).
* AUTHORS: Adjust to use ASCII to satisfy sc_check-AUTHORS.
|
|
* src/tail.c (tail_file): On failure to open a file,
set ignore=true when --retry is not specified.
* tests/tail-2/assert-2.sh: Adjust to the new behavior.
* tests/tail-2/retry.sh: Add a test case. Also change
from `tail ... && fail=1` to the more robust `returns_ 1 ...`
construct which detects segfaults etc.
* NEWS: Document the fix.
|
|
* src/tail.c (tail_forever): The BLOCKING optimization is only
enabled for non regular files (which can't be truncated), so ensure
we don't enable that unless we've a valid file descriptor.
* tests/tail-2/retry.sh: Add a test case.
* NEWS: Mention the bug fix.
|
|
* src/tail.c (tail_forever): Only read up to st_size on network
file systems to avoid the issue with a stale attribute cache
returning a smaller st_size than we have already read().
The was seen with glusterfs at least and caused the complete
file to be repeatedly output due to assuming the file was
truncated in this case.
* NEWS: Mention the fix.
|
|
* src/tail.c (ignore_pipe_or_fifo): Mark the descriptor as -1
for pipes so that any_live_files() detects correctly that
the entry is no longer live.
* tests/tail-2/pipe-f.sh: Add a test case.
* NEWS: Mention the fix.
Fixes http://bugs.gnu.org/24903 which was detected
using Symbolic Execution techniques developed in
the course of the SYMBIOSYS research project at
COMSYS, RWTH Aachen University.
|
|
* src/system.h (emit_backup_suffix_note): A new function to
output the backup suffix info. The strings are unchanged,
so translations are not impacted.
* src/cp.c (usage): Use the new function.
* src/ln.c (usage): Likewise.
* src/mv.c (usage): Likewise.
* src/install.c (usage): Likewise.
|
|
* src/cp.c (main): Avoid the getenv("SIMPLE_BACKUP_SUFFIX") call,
which is now done if needed in the gnulib backupfile module.
Also avoid the redundant strdup, as we don't modify this suffix.
* src/install.c (main): Likewise.
* src/ln.c (main): Likewise.
* src/mv.c (main): Likewise.
Fixes http://bugs.gnu.org/23153
|
|
* doc/coreutils.texi (date invocation): Document %q.
* src/date.c (usage): Likewise.
* tests/misc/date.pl: Add a test case.
* cfg.mk (sc_strftime_check): Adjust to allow %q.
* NEWS: Mention the new feature.
|
