Age | Commit message (Collapse) | Author |
|
* src/df.c (struct devlist): Add new struct for storing already-
examined device numbers.
(devlist_head): Add new store of the above type.
(show_rootfs): Add new global boolean to not skip rootfs.
(dev_examined): Add new function to check if the device has
already been traversed.
(get_dev): Filter out rootfs unless "-t rootfs" or the -a
option is specified. Filter out duplicate entries by calling
the above new dev_examined unless the -a option is specified.
(main): Set the show_rootfs variable appropriately when the -t
option is specified for rootfs. Free device list (guarded by
IF_LINT).
* tests/df/skip-duplicates.sh: Add test to exercise the skipping
of duplicate entries.
* tests/df/skip-rootfs.sh: Add test to exercise the skipping
of the rootfs pseudo file system.
* tests/local.mk: Add the above new tests.
* NEWS (Changes in behavior): Mention the changes.
* doc/coreutils.texi (df invocation): Document df's behavior about
skipping rootfs and duplicate entries.
Co-authored-by: Bernhard Voelker.
|
|
* src/cut.c (set_fields): Don't allocate memory for
`printable_field' if there are no finite ranges.
This is achieved by keeping max_range_endpoint as 0 when
there are no finite ranges. max_range_endpoint is then
used throughout the code to guard against allocation of,
and access to the bit array.
The extra allocation was introduced via commit v8.10-3-g2e636af.
|
|
* src/cut.c (main): Treat a NUL delimiter (-d '') consistently
with non NUL delimiters, and disallow such a delimiter option,
unless a field is also specified.
(set_fields): Provide a more accurate error message when
a given list is invalid.
* tests/misc/cut.pl: Add a test case.
|
|
* src/factor.c (mp_factor_init): Init the pointers with NULL,
which xrealloc (or realloc) handles fine.
|
|
Both Debian and Ubuntu builds of coreutils 8.20 hang while running the
test suite on powerpc, which is reproducible using 'factor 122'.
This turns out to be somewhat related to http://bugs.gnu.org/12754,
but not quite the same. uintmax_t is 64 bits, but the cntlzw
instruction takes 32-bit operands, and the cntlzd option is only
available on 64-bit hardware.
* src/longlong.h: Add an _LP64 check around the PPC64 code,
so that this falls back to the C implementations.
* NEWS: Mention the fix.
|
|
When printing output delimiters, and when a to-EOL range subsumes
at least one other range, cut would mistakenly print delimiters for
the subsumed range. This bug was probably introduced via commit
v5.2.1-639-g847e066.
* src/cut.c (set_fields): Ignore any range that is subsumed by a
to-EOL range. Also, move two declarations down.
* tests/misc/cut.pl: Add tests to exercise this.
* NEWS (Bug fixes): Mention it.
Reported by Marcel Böhme in http://bugs.gnu.org/12966
|
|
* src/cut.c (set_fields): When two right-open-ended ranges are
specified, don't blindly let the latter one take precedence over
the former. Instead, use the union of the ranges.
* tests/misc/cut.pl: Add tests to exercise this.
* NEWS (Bug fixes): Mention it.
Reported by Marcel Böhme in http://bugs.gnu.org/12966
Thanks to Berhard Voelker for catching log and NEWS typos.
|
|
* src/seq.c (scan_arg): Calculate the width more accurately
for numbers specified using scientific notation.
* tests/misc/seq.pl: Add tests for cases that were mishandled.
* NEWS: Mention the fix.
* THANKS.in: Reported by Marcel Böhme.
Fixes http://bugs.gnu.org/12959
|
|
As the inodes information is usually not so much of interest,
and some file systems including btrfs do not even provide it,
reading of the full df --output is easier when the block
statistic fields come just left of the last field, the mount
point.
* src/df.c (all_args_string): Move the inodes fields before
the block fields.
(usage): Likewise.
* tests/df/df-output.sh: Likewise.
* doc/coreutils.texi (df invocation): Likewise. Additionally,
explicitly mention the default order of the --output option.
|
|
* src/copy.c (copy_internal): Use DST_MODE_BITS, not SRC_MODE.
See Bernhard R. Link in <http://bugs.gnu.org/12947> and in
<http://bugs.debian.org/598018>.
|
|
The above option has been deprecated since coreutils-7.5
by commit v7.4-129-g718b279.
* src/nl.c (PAGE_INCREMENT_OPTION_DEPRECATED): Remove enum.
(longopts): Remove "page-increment" entry.
(main): Remove PAGE_INCREMENT_OPTION_DEPRECATED case.
* NEWS (Changes in behavior): Mention the change.
Reported by Marcel Böhme in <http://bugs.gnu.org/12940>.
|
|
The command "echo 12345 | cut -b 0-" prints an empty line while
it should fail with "fields and positions are numbered from 1".
* src/cut.c (set_fields): Add a diagnostic for the invalid open
range which starts with Zero, i.e., the range 0-.
* tests/misc/cut.pl: Add tests to ensure the range 0- fails for
fields (-f) and for positions (-b, -c).
* NEWS: Mention the fix.
Reported by Marcel Böhme in <http://bugs.gnu.org/12903>.
|
|
* src/factor.c [HAVE_ATTRIBUTE_MODE]: Fix typo in #if test:
s/HAVE_LONG_LONG/HAVE_LONG_LONG_INT/. Otherwise, factor.c would
elicit assembler errors on x32: it was incorrectly defining DItype
to long instead of long long. Patch and report in
http://bugs.debian.org/693337; Mike Stone notified upstream.
|
|
* src/factor.c: Indent cpp directives to reflect their nesting.
|
|
See Stefano Lattarini in <http://bugs.gnu.org/12899>.
* src/local.mk (BUILT_SOURCES): Put $(top_srcdir)/src/primes.h here
(MAINTAINERCLEANFILES): ... instead of here.
|
|
* src/factor.c: Remove unneeded #inclusion of"verify.h".
It's already included via system.h.
|
|
This follows suggestions by Jim Meyering in
<http://bugs.gnu.org/12841#34>.
* src/make-prime-list.c (print_wide_uint): Change "nested" argument
to "nesting", and use it to avoid outputting lines that are too long.
* src/primes.h: Remove from git. This can be generated by a
maintainer. It's nicer to do so on a host with at least 128-bit
arithmetic.
|
|
With this change, the maintainer builds primes.h and it is part of
the tarball. primes.h's contents are not architecture-specific.
* .gitignore: Remove /src/primes.h.
* src/factor.c: Include verify.h.
(W): New constant. Verify that uintmax_t lacks holes
and that W is no wider than the integers used to generate primes.h.
* src/local.mk (EXTRA_DIST): Add src/primes.h.
(BUILT_SOURCES, CLEANFILES): Remove src/primes.h.
($(top_srcdir)/src/primes.h): Rename from src/primes.h.
Do not depend on src/make-prime-list. Instead, use sub-make to
build, so that we build primes.h only if it does not exist.
* src/make-prime-list.c: Include <limits.h>, for ULONG_MAX.
(wide_uint): Define to uintmax_t or unsigned __int128 if not #defined.
(struct prime, binvert, process_prime): Use it instead of uintmax_t.
(print_wide_uint): New function. This generates the proper pinv
value regardless of the width of uintmax_t on the target, so long
as the width doesn't exceed that of the width of wide_uint on the
maintainer host that generated src/primes.h.
(output_primes): Use it. Output WIDE_UINT_BITS, too. Let the
target compute its own lim, since its uintmax_t may be narrower
than ours.
(SZ): Remove.
* src/primes.h: New file, generated with 128-bit integers and usable
on any host where uintmax_t's width is no greater than 128 bits.
|
|
* src/make-prime-list.c (malloc): Undef. This fixes a problem on
AIX 8.20 reported by Michael Felt in <http://bugs.gnu.org/12841>.
|
|
These were missed in this related change v8.14-104-g44e20cd
* src/chcon.c (usage): Mention the two --preserve-root options.
* doc/coreutils.texi (chcon invocation): Plus the --dereferece option.
|
|
* src/cp.c (usage): Replace "redundant" with "ignored".
* doc/coreutils.texi (cp invocation): Likewise.
|
|
* src/df.c (usage): Add a short description of --output and its
available field names for use in the optional argument.
* doc/coreutils.texi (df invocation): Add the new option with more
details and a few examples.
* NEWS (New features): Mention the new option.
(Changes in behvaior): Mention the new placeholder for fields
in the "total" line.
|
|
This supports changing the order of the fields displayed,
and also allows the simultaneous display of inode and block fields.
src/df.c (get_dev): Factor out calling get_header to ...
(main): ... here. Call print_table only if file_systems_processed.
src/df.c (Displayable fields): Rename DEV_FIELD to SOURCE_FIELD.
Rename TYPE_FIELD to FSTYPE_FIELD. Rename FREE_FIELD to AVAIL_FIELD.
Rename MNT_FIELD to TARGET_FIELD.
* src/df.c (display_field_t): Turn loose enum definition of the
displayable fields into a typedef. Add the inode fields ITOTAL_FIELD,
IUSED_FIELD, IAVAIL_FIELD, IPCENT_FIELD.
(field_data_t): Define structure to hold the display field, the
caption, the width and the alignment for each field of the above
type.
(field_data): Add array the values of field data for each display
field.
(headers, alignments, widths): Remove arrays.
(columns): Add a pointer to the storage for the array of the actual
output columns, i.e., fields.
(ncolumns): Add counter for the current output columns.
(alloc_table_row): Allocate the dynamic ncolumns value of strings.
(print_table): Loop over ncolumns instead of constant NFIELDS. Rename
loop variable 'field' to 'col' to avoid ambiguity with the 'field'
element in the columns structure. Adjust the condition for printing
the last column by comparing with the column number instead of the
field name (TARGET_FIELD). Use the width and the alignment stored in
the columns data.
(alloc_field): Add new function to allocate a field in the columns
array.
(get_field_list): Add new function to fill the array of output columns
for each mode.
(get_header): Loop over ncolumns instead of constant NFIELDS. Rename
the loop variable 'field' to 'col' to avoid ambiguity with the 'field'
element in the columns structure. Remove the code for continuing the
loop if the current column is the file system type and print_type is not
active (which is now impossible). Store the cell in the columns store
along with the new width.
(get_dev): Loop over ncolumns instead of the constant NFIELDS. Rename
the loop variable 'field' to 'col' to avoid ambiguity with the 'field'
element in the columns structure; move the definition down to where it
is used first. Add cases for the inode fields ITOTAL_FIELD,
IUSED_FIELD, IAVAIL_FIELD and IPCENT_FIELD. Store the cell in the
columns store along with the new width.
(main): Use new get_field_list function to fill the list of output
columns.
* src/df.c (print_table): Instead of fputs()ing directly, apply
ambsalign on the last field, too. Use the new MBA_NO_RIGHT_PAD flag
for this.
* src/df.c (TOTAL_OPTION): Add new enum value.
(long_options): Use it for the "total" option instead of 'c'.
(main): Likewise.
* src/df.c (get_dev): Remove condition to copy the fstype into the
FSTYPE_FIELD - based on whether print_type is non-Null. Since the
introduction of get_field_list(), there are only fields added to
the columns array which have to be added.
* src/df.c (get_dev): Guard the summing up of the values for the
grand total: only do it if we have to print the total and if the
current invocation is not for processing it.
* src/df.c (main): Pass a hyphen "-" for the mount point name
to get_dev.
(get_dev): As the mount_point is now always there,
remove the condition and the else case for the TARGET_FIELD.
Instead, simply copy the mount_point.
All cells are now always present. Therefore, add an assertion
statement if one was not. Furthermore, hide the problematic
characters unconditionally.
(print_table): Remove the skipping of empty cells.
* tests/df/total-verify.sh: Accommodate to the new "-" in the
target field of the summary line.
* NEWS: Mention the change in behavior.
* src/df.c (field_type_t): Add new typedef of 3 enums to distinguish
between block, inode and other fields.
(field_data_t): Add field_type member of the above new type.
(field_data): Add default values for the above field_type,
indicating whether a field contains block values, inode values
or other, generic values.
(field_values_t): Add this struct to store the field values, used
by and factored out from get_dev to be able to define such a struct
for both the inode and the block values.
(get_field_values): Add this function to obtain the block values
and the inode values from the file system usage, used by and
factored out from get_dev.
(add_to_grand_total): Add this function to sum the values of the
current mount point up for the grand total, used by and factored
out from get_dev.
(get_dev): Move the definition of the variables fsu, buf, pct and
cell down to where they are used first to give them a better scope.
Factor out input_units, output_units, total, available,
negate_available, available_to_root, used and negate_used into the
above struct field_values_t.
Factor out the mapping of the fsu values to the above variables
into above function get_field_values.
Factor out the summing up of the grand total values into the
above function add_to_grand_total.
Define block_values and inode_values of the new type and call the
new get_field_values to fill them from the fsu values.
Call the above function add_to_grand_total for summing up the
values for the grand total.
Inside the loop over all fields, define a variable 'v' to point
to either the block_values or the inode_values, depending on the
current field's field_type. Change the code in the cases
TOTAL_FIELD/ITOTAL_FIELD, USED_FIELD/IUSED_FIELD, AVAIL_FIELD/
IAVAIL_FIELD and PCENT_FIELD/IPCENT_FIELD to use the field values
where 'v' is pointing to, i.e., either the block_values or the
inode_values.
* src/df.c (main): Remove setting of grand_fsu.fsu_blocks in the
inode_format case as this is no longer needed and would lead to
wrong results once when mixed block/inode fields will be used.
* src/df.c (main): Cleanup the code at the end regarding
file_systems_processed to make the code clearer.
* src/df.c (inode_format): Remove variable.
(main): Remove initialization of the above variable.
In getopts loop, directly set the header_mode to INODES_MODE
instead of using the above variable. Afterwards, remove the
mapping to INODES_MODE as it is already set.
* src/df.c (posix_format): Move variable ...
(main): ... to here.
* src/df.c (print_table): Enhance the comment about 2-line format
in cases where the SOURCE_FIELD exceeds 20 chars, as such
behavior has been removed long ago by commit v8.10-40-g99679ff.
* src/df.c (Display modes): Add OUTPUT_MODE, remove unused NMODES.
(display_field_t): Remove unnecessary NFIELDS.
(field_data_t): Add member 'arg' for the field name in the --output
argument. Add member 'used' to remember if a field is already used
in the columns array.
(field_data): Add values for the above new members arg and used.
(all_args_string): Add variable which represents the argument for
the --output option which includes all fields.
(OUTPUT_OPTION): Add enum to identify the long --output option.
(long_options): Add optional-argument --output option.
(alloc_field): Assert that the field is not already used.
Mark the field as used.
(decode_output_arg): Add function to parse the comma-separated
field list passed to the --output option in order to add the
appropriate fields to the columns array.
(get_field_list): Add case for the new OUTPUT_MODE to add all
available fields to columns in the case the --output option
has been passed without any values. Use the comma-separated
field list form to pass to decode_output_arg to keep the field
header mapping for the OUTPUT_MODE only on one place.
(main): Define format string msg_mut_excl to be used in the
following checks whether the use of --output and the other
option is mutually exclusive.
In the getopt_long loop, add a check to the case for the -i option
to issue an error message when it is used together with --output;
Likewise for -T and -P.
Add a new case for OUTPUT_OPTION, together with similar checks as
above and eventually passing the optarg to decode_output_arg.
After the getopt_long loop, consider the OUTPUT_MODE case in order
not to run into -h or -P mode.
* src/df.c (get_dev): Also xstrdup the dev_name, and free it
afterwards to silence a valgrind warning about definitely lost
memory.
(main): Free the columns store to silence valgrind, guarded by
the IF_LINT macro.
* src/df.c (main): Pass "total" as the mount point to get_dev if
the SOURCE_FIELD is not among the columns to output.
* tests/df/df-output.sh: Change the test to ensure the content of
the target field of the grand total line: if the source field is
present, then the target should be "-", else the target field should
be "target".
* NEWS (Changes in behavior): Enhance the exiting NEWS entry.
* doc/coreutils.texi (df invocation): Document the content of the
source and target field in the grand total line.
* src/df.c (main): Add another condition to the need_fs_type
parameter of read_file_system_list whether the FSTYPE_FIELD is
used or not.
* src/df.c (get_header): Indicate the block size used,
in the "size" header, when using --output without -h.
* tests/df/df-output.sh: Adjust for, and add an extra test for,
the new behavior.
|
|
It's useful for commands that support running for an indeterminite
amount of time, to not return a specific timeout exit status (124),
and instead let the command handle the timeout signal and return
a status for the work done so far.
* doc/coreutils.texi (timeout invocation): Describe the new option.
* src/timeout.c (preserve_status): A new global boolean to
enable the --preserve-status behavior.
(usage): Describe the new option.
(main): Don't return EXIT_TIMEOUT of preserve_status is set.
* tests/misc/timeout.sh: Add a test for the new option.
|
|
* src/longlong.h: Restrict some HPPA assembly variants to PA RISC V2.0.
Note we also avoid this assembly for ilp32 runtimes, since even though
the assembly is accepted there, it's not safe as the context can get
clobbered between the 'add' and 'add,dc'.
This fixes a compile failure with newer HPPA systems with default
GCC CPU options.
Reported by John David Anglin
|
|
This was not seen to be an issue in practise,
but to make the code more robust, don't assume
uintmax_t is 64 bits.
* src/factor.c (W_TYPE_SIZE): Define based on integer limits.
* src/make-prime-list.c (output_primes): Define format width
based on integer limits.
|
|
* src/factor.c (print_uintmaxes): Replace with PRIuMAX.
* src/join.c (check_order): Likewise.
* cfg.mk (sc_check-j-printf-format): Add a syntax-check rule
to flag new cases of this.
|
|
* src/make-prime-list.c: Hardcode the uintmax_t width
to 16 hex digits (64 bit), to avoid this compile issue
on HPUS systems at least.
|
|
* src/pr.c: Replace the code to truncate the most significant
digits of line numbers, with much simpler string manipulation
that supports arbitrary widths. Before this, specifying a
width >= 32 to -n would result in a divide by zero error.
Also remove the inconsistent padding with zeros and spaces, which
would result in zero padding for widths 12 and 15.
* tests/pr/pr-tests.pl: Added a test to ensure no zero padding,
and also a test for the divide by zero case.
* NEWS: Mentioned the fix
Reported by Ondrej Oprala
|
|
* src/local.mk (src_factor_LDADD): Append $(LIBICONV).
* crg.mk (sc_check-I18N-AUTHORS): A new syntax check rule
to ensure we add LIBICONV where appropriate.
* THANKS.in: Add the reporter.
Reported by Christian Jullien
Syntax check suggested by Jim Meyering
|
|
* src/factor.c (is_square): Use active voice in comment, not passive.
(factor): Add function-describing comment.
(mp_factor): Likewise.
|
|
src/factor.c (__GMP_DECLSPEC): Move back from longlong.h
to treat consistently with other stub macros.
(__GMP_GNUC_PREREQ): Reference to avoid -Wunused-macros warning.
(__GMP_DECLSPEC): Likewise.
(ASSERT): Likewise.
(__clz_tab): Likewise.
(factor_using_division): Mark a variable as unused.
(mulredc): Likewise.
(mulredc2): Likewise.
(divexact_21): Likewise.
|
|
* src/factor.c (factor_using_pollard_rho2): On some systems
(like sparc) we need to promote all addmod2() parameters
to uintmax_t to avoid warnings.
|
|
* src/longlong.h: Restrict some sparc assembly variants
to sparc V9. This was seen to be an issue with newer
sparc systems with default gcc CPU options.
|
|
* src/extent-scan.c (extent_scan_read): Reset our last_ei
pointer whenever the parent buffer might have just been freed.
* tests/cp/fiemap-extent-FMR.sh: New test.
* tests/local.mk (all_tests): Add it.
* NEWS (Bug fixes): Mention it.
Reported by Mike Gerth in http://bugs.gnu.org/12656, and with
help from Alan Curry. Bug introduced in commit v8.10-60-g18f5a85.
|
|
In the recent factor rewrite, the GMP code
wasn't actually used; just an error was printed
on integer overflow. While fixing that it was noticed
that correct input validation wasn't done in all cases
when falling back to the GMP code.
* src/factor.c (print_factors) Fallback to GMP on overflow.
(strto2uintmax): Scan the string for invalid characters,
so that case can be detected independently of overflow.
Return an error when an empty string is passed.
Also allow leading spaces and '+' in input numbers.
* tests/misc/factor.pl: Ensure the GMP code is exercised
when compiled in. Also add a test to verify leading
spaces and '+' are allowed.
|
|
The new factor code introduced usage of mpz_inits() and
mpz_clears(), which are only available since GMP >= 5,
and will result in a compile error when missing.
* m4/gmp.m4 (cu_GMP): Define HAVE_DECL_MPZ_INITS appropriately.
* src/factor (mpz_inits): New function, defined where missing.
(mpz_clears): Likewise.
|
|
On some systems, -Wunused-macros would warn about two macros:
src/factor.c:148:0: warning: macro "__clz_tab" is not used
src/factor.c:126:0: warning: macro "UHWtype" is not used
* src/factor.c: Add a use to placate gcc.
|
|
When building the new make-prime-list program on a system for which
strerror is defined to rpl_strerror, we'd get a link failure.
The problem is that we're including <config.h> for some definitions,
but do not want the rpl_ ones, since this particular program must
not be linked against gnulib (aka libcoreutils.a). This did not
arise on Fedora 17 or 18, but did on Debian wheezy/sid.
* src/make-prime-list.c (strerror): #undef.
Build failure introduced by commit v8.19-152-gcf67e4c.
|
|
* src/factor.c (print_factors_single): Use fputs and umaxtostr
rather than printf with "%ju". This reduced the time required
to compute and print the factors of the first 10^7 integers from
over 8 seconds to 5.75s. Run this command:
seq $((10**7)) | env time factor > /dev/null
|
|
* src/factor.c: Renamed from factor-ng.c, with the following changes:
Adjust copyright header to be consistent with others.
Use xmalloc and xrealloc, to avoid segv upon OOM.
Switch back to using readtokens to handle input.
Diagnose invalid inputs.
s/fprintf+exit/error/
(print_factors): Add comments.
(strto2uintmax): Return strtol_error, not int.
(read_item): Remove, no longer used.
(main): Use atexit(close_stdout) so that we don't ignore failed write.
* cfg.mk: Exempt src/longlong.h from several tests.
Exempt run.sh from the test-list-consistency test.
Exempt make-prime-list.c from numerous tests, since we won't
be making it conform: it must not link with libcoreutils.a.
Exempt factor-ng.c from the no-upper-case error message test.
* AUTHORS (factor): Add Torbjörn and Niels.
* tests/local.mk (factor_tests): Encode the 37 tests.
($(factor_tests)): Rule to generate a test script for each test.
* tests/factor/run.sh: New script, marked as very expensive.
* .gitignore: Ignore new generated files.
* src/local.mk (src/primes.h): New rule.
(noinst_PROGRAMS): Add make-prime-list.
(noinst_HEADERS): Add longlong.h.
Remove all wheel-related rules and files.
* src/wheel-gen.pl: Remove file.
maint: mark set-but-not-used variables with ATTRIBUTE_UNUSED
* src/factor-ng.c (redcify, prime_p, isqrt2): Mark them, so we
don't have to disable -Wunused-but-set-variable.
maint: use __builtin_expect only if __GNUC__
* src/factor-ng.c (LIKELY, UNLIKELY) [__GNUC__]: Add #ifdef guard.
build: avoid warning about unused macro
* src/factor-ng.c (__GMP_DECLSPEC): Don't define here
* src/longlong.h (__GMP_DECLSPEC): Define if not already defined.
|
|
* src/factor-ng.c: Import some improvements from
http://gmplib.org:8000/factoring
Co-authored-by: Torbjörn Granlund <tg@gmplib.org>
|
|
* src/factor-ng.c: New file, from nt-factor.
* src/longlong.h: New file.
* NEWS (Improvements): Mention the upcoming improvements.
Co-authored-by: Niels Möller
|
|
* src/make-prime-list.c: Insert spaces before parens.
(main): Abort if the 8-delta value ever exceeds 255.
|
|
Even though this is just a helper program that is run solely to create
primes.h, it should not ignore a write failure. Normally we would
simply call atexit (close_stdout), but we cannot do that from this
helper program, since it must be built before the generated header,
primes.h. If we were to make the linking of make-prime-list depend
on libcoreutils.a, that would add all lib/*.o files to the list
of dependents of $(BUILT_HEADERS). Then, since there is currently no
provision to ensure that a file like lib/stdio.h (another built header)
is built before the first lib/*.o file that also includes <stdio.h>,
some lib/*.o files would be built before lib/stdio.h and some after.
The former would provoke link failures due to undefined rpl_* functions.
* src/make-prime-list.c: Include <errno.h>.
(fclose): Undef, so that a definition to rpl_fclose does not
cause a link failure.
(main): Per the above, in this exceptional case, we check for fclose
and ferror failure manually, and don't worry about the ferror-only
failure case in which errno may not be relevant.
|
|
* src/make-prime-list.c: Include <config.h>.
(binvert): Add _GL_ATTRIBUTE_CONST.
|
|
* src/make-prime-list.c: New file, from nt-factor.
Co-authored-by: Niels Möller <nisse@lysator.liu.se>
|
|
* src/local.mk: Remove the above dependency.
A soon-to-be-added new program, make-prime-list, must not depend
on that, since it is used to create a BUILT_SOURCES file.
That dependency is already handled via the ..._LD_ADD variables,
and so that redundant dependency has so far been harmless.
|
|
On some systems (notably, BSD-based, like at least OpenBSD 4.9),
the me_type member does not come from the heap.
* src/du.c (fill_mount_table): Free the ->me_type member only
when it was malloc'd, i.e., when ->me_type_malloced is nonzero.
Bug introduced via commit v8.19-2-gcf7e1b5.
Reported as http://bugs.gnu.org/12542.
|
|
* src/nice.c (usage): s/Nicenesses/Niceness values/
|