path: root/src/expand.c

/* expand - convert tabs to spaces
   Copyright (C) 89, 91, 1995-2006 Free Software Foundation, Inc.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3, or (at your option)
   any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software Foundation,
   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */

/* By default, convert all tabs to spaces.
   Preserves backspace characters in the output; they decrement the
   column count for tab calculations.
   The default action is equivalent to -8.

   Options:
   --tabs=tab1[,tab2[,...]]
   -t tab1[,tab2[,...]]
   -tab1[,tab2[,...]]	If only one tab stop is given, set the tabs tab1
			columns apart instead of the default 8.  Otherwise,
			set the tabs at columns tab1, tab2, etc. (numbered from
			0); replace any tabs beyond the tab stops given with
			single spaces.
   --initial
   -i			Only convert initial tabs on each line to spaces.

   David MacKenzie <djm@gnu.ai.mit.edu> */

#include <config.h>

#include <stdio.h>
#include <getopt.h>
#include <sys/types.h>
#include "system.h"
#include "error.h"
#include "quote.h"
#include "xstrndup.h"

/* The official name of this program (e.g., no `g' prefix).  */
#define PROGRAM_NAME "expand"

#define AUTHORS "David MacKenzie"

/* The number of bytes added at a time to the amount of memory
   allocated for the output line.  */
#define OUTPUT_BLOCK 256

/* The name this program was run with.  */
char *program_name;

/* If true, convert blanks even after nonblank characters have been
   read on the line.  */
static bool convert_entire_line;

/* If nonzero, the size of all tab stops.  If zero, use `tab_list' instead.  */
static uintmax_t tab_size;

/* Array of the explicit column numbers of the tab stops;
   after `tab_list' is exhausted, each additional tab is replaced
   by a space.  The first column is column 0.  */
static uintmax_t *tab_list;

/* The number of allocated entries in `tab_list'.  */
static size_t n_tabs_allocated;

/* The index of the first invalid element of `tab_list',
   where the next element can be added.  */
static size_t first_free_tab;

/* Null-terminated array of input filenames.  */
static char **file_list;

/* Default for `file_list' if no files are given on the command line.  */
static char *stdin_argv[] =
{
  "-", NULL
};

/* True if we have ever read standard input.  */
static bool have_read_stdin;

/* The desired exit status.  */
static int exit_status;

static char const shortopts[] = "it:0::1::2::3::4::5::6::7::8::9::";

static struct option const longopts[] =
{
  {"tabs", required_argument, NULL, 't'},
  {"initial", no_argument, NULL, 'i'},
  {GETOPT_HELP_OPTION_DECL},
  {GETOPT_VERSION_OPTION_DECL},
  {NULL, 0, NULL, 0}
};

void
usage (int status)
{
  if (status != EXIT_SUCCESS)
    fprintf (stderr, _("Try `%s --help' for more information.\n"),
	     program_name);
  else
    {
      printf (_("\
Usage: %s [OPTION]... [FILE]...\n\
"),
	      program_name);
      fputs (_("\
Convert tabs in each FILE to spaces, writing to standard output.\n\
With no FILE, or when FILE is -, read standard input.\n\
\n\
"), stdout);
      fputs (_("\
Mandatory arguments to long options are mandatory for short options too.\n\
"), stdout);
      fputs (_("\
  -i, --initial       do not convert tabs after non blanks\n\
  -t, --tabs=NUMBER   have tabs NUMBER characters apart, not 8\n\
"), stdout);
      fputs (_("\
  -t, --tabs=LIST     use comma separated list of explicit tab positions\n\
"), stdout);
      fputs (HELP_OPTION_DESCRIPTION, stdout);
      fputs (VERSION_OPTION_DESCRIPTION, stdout);
      emit_bug_reporting_address ();
    }
  exit (status);
}

/* Add tab stop TABVAL to the end of `tab_list'.  */

static void
add_tab_stop (uintmax_t tabval)
{
  if (first_free_tab == n_tabs_allocated)
    tab_list = X2NREALLOC (tab_list, &n_tabs_allocated);
  tab_list[first_free_tab++] = tabval;
}

/* Add the comma or blank separated list of tab stops STOPS
   to the list of tab stops.  */

static void
parse_tab_stops (char const *stops)
{
  bool have_tabval = false;
  uintmax_t tabval IF_LINT (= 0);
  char const *num_start IF_LINT (= NULL);
  bool ok = true;

  for (; *stops; stops++)
    {
      if (*stops == ',' || isblank (to_uchar (*stops)))
	{
	  if (have_tabval)
	    add_tab_stop (tabval);
	  have_tabval = false;
	}
      else if (ISDIGIT (*stops))
	{
	  if (!have_tabval)
	    {
	      tabval = 0;
	      have_tabval = true;
	      num_start = stops;
	    }

	  /* Detect overflow.  */
	  if (!DECIMAL_DIGIT_ACCUMULATE (tabval, *stops - '0', uintmax_t))
	    {
	      size_t len = strspn (num_start, "0123456789");
	      char *bad_num = xstrndup (num_start, len);
	      error (0, 0, _("tab stop is too large %s"), quote (bad_num));
	      free (bad_num);
	      ok = false;
	      stops = num_start + len - 1;
	    }
	}
      else
	{
	  error (0, 0, _("tab size contains invalid character(s): %s"),
		 quote (stops));
	  ok = false;
	  break;
	}
    }

  if (!ok)
    exit (EXIT_FAILURE);

  if (have_tabval)
    add_tab_stop (tabval);
}

/* Check that the list of tab stops TABS, with ENTRIES entries,
   contains only nonzero, ascending values.  */

static void
validate_tab_stops (uintmax_t const *tabs, size_t entries)
{
  uintmax_t prev_tab = 0;
  size_t i;

  for (i = 0; i < entries; i++)
    {
      if (tabs[i] == 0)
	error (EXIT_FAILURE, 0, _("tab size cannot be 0"));
      if (tabs[i] <= prev_tab)
	error (EXIT_FAILURE, 0, _("tab sizes must be ascending"));
      prev_tab = tabs[i];
    }
}

/* Close the old stream pointer FP if it is non-NULL,
   and return a new one opened to read the next input file.
   Open a filename of `-' as the standard input.
   Return NULL if there are no more input files.  */

static FILE *
next_file (FILE *fp)
{
  static char *prev_file;
  char *file;

  if (fp)
    {
      if (ferror (fp))
	{
	  error (0, errno, "%s", prev_file);
	  exit_status = EXIT_FAILURE;
	}
      if (STREQ (prev_file, "-"))
	clearerr (fp);		/* Also clear EOF.  */
      else if (fclose (fp) != 0)
	{
	  error (0, errno, "%s", prev_file);
	  exit_status = EXIT_FAILURE;
	}
    }

  while ((file = *file_list++) != NULL)
    {
      if (STREQ (file, "-"))
	{
	  have_read_stdin = true;
	  prev_file = file;
	  return stdin;
	}
      fp = fopen (file, "r");
      if (fp)
	{
	  prev_file = file;
	  return fp;
	}
      error (0, errno, "%s", file);
      exit_status = EXIT_FAILURE;
    }
  return NULL;
}

/* Change tabs to spaces, writing to stdout.
   Read each file in `file_list', in order.  */

static void
expand (void)
{
  /* Input stream.  */
  FILE *fp = next_file (NULL);

  if (!fp)
    return;

  for (;;)
    {
      /* Input character, or EOF.  */
      int c;

      /* If true, perform translations.  */
      bool convert = true;


      /* The following variables have valid values only when CONVERT
	 is true:  */

      /* Column of next input character.  */
      uintmax_t column = 0;

      /* Index in TAB_LIST of next tab stop to examine.  */
      size_t tab_index = 0;


      /* Convert a line of text.  */

      do
	{
	  while ((c = getc (fp)) < 0 && (fp = next_file (fp)))
	    continue;

	  if (convert)
	    {
	      if (c == '\t')
		{
		  /* Column the next input tab stop is on.  */
		  uintmax_t next_tab_column;

		  if (tab_size)
		    next_tab_column = column + (tab_size - column % tab_size);
		  else
		    for (;;)
		      if (tab_index == first_free_tab)
			{
			  next_tab_column = column + 1;
			  break;
			}
		      else
			{
			  uintmax_t tab = tab_list[tab_index++];
			  if (column < tab)
			    {
			      next_tab_column = tab;
			      break;
			    }
			}

		  if (next_tab_column < column)
		    error (EXIT_FAILURE, 0, _("input line is too long"));

		  while (++column < next_tab_column)
		    if (putchar (' ') < 0)
		      error (EXIT_FAILURE, errno, _("write error"));

		  c = ' ';
		}
	      else if (c == '\b')
		{
		  /* Go back one column, and force recalculation of the
		     next tab stop.  */
		  column -= !!column;
		  tab_index -= !!tab_index;
		}
	      else
		{
		  column++;
		  if (!column)
		    error (EXIT_FAILURE, 0, _("input line is too long"));
		}

	      convert &= convert_entire_line | !! isblank (c);
	    }

	  if (c < 0)
	    return;

	  if (putchar (c) < 0)
	    error (EXIT_FAILURE, errno, _("write error"));
	}
      while (c != '\n');
    }
}

int
main (int argc, char **argv)
{
  int c;

  initialize_main (&argc, &argv);
  program_name = argv[0];
  setlocale (LC_ALL, "");
  bindtextdomain (PACKAGE, LOCALEDIR);
  textdomain (PACKAGE);

  atexit (close_stdout);

  have_read_stdin = false;
  exit_status = EXIT_SUCCESS;
  convert_entire_line = true;
  tab_list = NULL;
  first_free_tab = 0;

  while ((c = getopt_long (argc, argv, shortopts, longopts, NULL)) != -1)
    {
      switch (c)
	{
	case 'i':
	  convert_entire_line = false;
	  break;

	case 't':
	  parse_tab_stops (optarg);
	  break;

	case '0': case '1': case '2': case '3': case '4':
	case '5': case '6': case '7': case '8': case '9':
	  if (optarg)
	    parse_tab_stops (optarg - 1);
	  else
	    {
	      char tab_stop[2];
	      tab_stop[0] = c;
	      tab_stop[1] = '\0';
	      parse_tab_stops (tab_stop);
	    }
	  break;

	case_GETOPT_HELP_CHAR;

	case_GETOPT_VERSION_CHAR (PROGRAM_NAME, AUTHORS);

	default:
	  usage (EXIT_FAILURE);
	}
    }

  validate_tab_stops (tab_list, first_free_tab);

  if (first_free_tab == 0)
    tab_size = 8;
  else if (first_free_tab == 1)
    tab_size = tab_list[0];
  else
    tab_size = 0;

  file_list = (optind < argc ? &argv[optind] : stdin_argv);

  expand ();

  if (have_read_stdin && fclose (stdin) != 0)
    error (EXIT_FAILURE, errno, "-");

  exit (exit_status);
}