summaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2009-11-05mktemp: don't leave file behind on write failureEric Blake
* src/mktemp.c (main): Remove just-created file if stdout had problems. * bootstrap.conf (gnulib_modules): Add remove. * tests/misc/close-stdout: Test it. * NEWS: Document it.
2009-11-03tests: rm: add test for today's change in behaviorJim Meyering
* tests/Makefile.am (root_tests): Add rm/read-only to the list. * tests/rm/read-only: New file.
2009-11-03tests: inotify-race: don't let malfunctioning gdb hang the testJim Meyering
* tests/tail-2/inotify-race: Apply timeout to each gdb invocation.
2009-10-30tests: factor 350 fail=0 initializations into test-lib.shJim Meyering
Run this command to remove the factored-out "fail=0" lines. perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$') * tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts. * tests/...: nearly all bourne shell scripts Suggested by Eric Blake.
2009-10-30tests: remove the less-regular fail=0 assignments manuallyJim Meyering
* tests/tail-2/assert-2: * tests/tail-2/assert: * tests/cp/file-perm-race: * tests/misc/df: * tests/misc/truncate-dir-fail:
2009-10-29tests: don't let a fail=1 env. setting induce unwarranted test failureJim Meyering
* cfg.mk (sc_fail_is_initialized): New rule. Fix the offenders: * tests/cp/acl: Set fail=0 * tests/cp/backup-is-src: Likewise. * tests/cp/file-perm-race: Likewise. * tests/cp/reflink-auto: Likewise. * tests/cp/same-file: Likewise. * tests/ln/backup-1: Likewise. * tests/misc/su-fail: Likewise. * tests/misc/truncate-owned-by-other: Likewise. * tests/mkdir/p-3: Likewise. * tests/mkdir/selinux: Likewise. * tests/mkdir/special-1: Likewise. * tests/mv/acl: Likewise. * tests/mv/backup-is-src: Likewise. * tests/mv/diag: Likewise. * tests/mv/force: Likewise. * tests/mv/hard-link-1: Likewise. * tests/mv/into-self-3: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/touch/now-owned-by-other: Likewise.
2009-10-28nice, nohup, su: detect write failure to stderrEric Blake
These programs can print non-fatal diagnostics to stderr prior to exec'ing a subsidiary program. However, if we thought the situation warranted a diagnostic, we insist that the diagnostic be printed without error, rather than blindly exec, as it may be a security risk. For an example, try 'nice -n -1 nice 2>/dev/full'. Failure to raise priority (by lowering niceness) is not fatal, but failure to inform the user about failure to change priority is dangerous. * src/nice.c (main): Declare failure if writing advisory message to stderr fails. * src/nohup.c (main): Likewise. * src/su.c (main): Likewise. * tests/misc/nice: Test this. * tests/misc/nohup: Likewise. * NEWS: Document this.
2009-10-28echo, printf: interpret \e as the Escape characterPádraig Brady
Match gcc, perl, bash, ksh, tcsh, ... in supporting \e. * src/printf.c (print_escape_char): Output \x1B when \e encountered. * src/echo.c (main): Likewise. * src/stat.c (print_escape_char): Likewise. * doc/coreutils.texi (echo invocation): Add \e to the list. * tests/misc/printf: Verify that \e outputs \x1B. * NEWS: Mention the change in behaviour.
2009-10-28printenv: ignore bogus variable namesEric Blake
Exposed by env a=b=c printenv a=b. * src/printenv.c (main): Silently reject = in names. * tests/misc/printenv: Test for it. * NEWS: Document this.
2009-10-27env, printenv: add -0/--null optionEric Blake
Allows for unambiguous processing when environment values (or even non-portable names!) contain newline. * src/env.c (longopts): Add new option. (usage): Document it. (main): Implement it. * src/printenv.c (longopts): New variable. (usage): Document new option. (main): Implement it. * doc/coreutils.texi (Common options): New macro optNull. (du invocation, env invocation, printenv invocation): Use it. * NEWS: Mention this. * tests/misc/env-null: New test. * tests/Makefile.am (TESTS): Run it.
2009-10-27tests: add printenv coverageEric Blake
* tests/misc/printenv: New test. * tests/Makefile.am (TESTS): Run it. * .gitignore: Ignore more cruft.
2009-10-27tests: fix PATH problems on cygwinEric Blake
* tests/misc/sort-compress: Remove non-portable over-restriction of PATH; besides, commit 3ea177e changed sort to no longer default to gzip. * tests/rm/fail-eperm: Untaint, rather than clear, PATH. * tests/misc/pwd-long: Likewise. Also skip test if long path cannot be created. (normalize_to_cwd_relative): Use eq rather than ==, since cygwin perl doesn't properly handle 64-bit ino_t numerically.
2009-10-26tests: clean up tests of env -- handlingEric Blake
The comment in env.c about -- handling has not matched the behavior in the code since the initial commit back in 1992. * src/env.c: Fix bogus comment. * tests/misc/env: Further tweaks, avoiding PATH problems inherent in testing -i, and testing program name containing =. * doc/coreutils.texi (env invocation): Mention that intermediate program is needed to invoke program with name containing =.
2009-10-26doc: document PATH interactions with envEric Blake
* doc/coreutils.texi (env invocation): Mention that PATH is modified prior to exec. * tests/misc/env: Test this.
2009-10-26env: reject bogus -u argumentsEric Blake
* src/env.c (main): Use unsetenv rather than putenv to remove items from environ, and check for failure. * bootstrap.conf (gnulib_modules): Add unsetenv. * tests/misc/env: Test this. * NEWS: Document it.
2009-10-26tests: avoid file name not portable to cygwinEric Blake
* tests/misc/chroot-fail: Use 'no_such', not '...', since cygwin 1.5 silently strips trailing dots. * tests/misc/nice-fail: Likewise. * tests/misc/stdbuf: Likewise. * tests/misc/timeout-parameters: Likewise.
2009-10-26tests: rm/one-file-system: work around umount failureJim Meyering
* tests/rm/one-file-system (cleanup_): Unmount a/b, rather than "$other_partition_tmpdir", to accommodate those who link /etc/mtab to /proc/mounts. Reported by Gilles Espinasse in http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/18508
2009-10-26tests: adjust new env test not to failJim Meyering
* tests/misc/env: Create ./-i as a link to our "echo" binary, rather than as a bourne shell script, so that env can exec it. Set PATH to ".".
2009-10-26tests: nice: adjust new tests to work more portablyJim Meyering
* tests/misc/nice (tests): Accommodate a nice program for which "nice -n -1 nice" prints nothing. It should print -1 or (usually) 0. Otherwise, we'd get syntax errors.
2009-10-23tests: test recent status changesEric Blake
* tests/misc/nice: Enhance test. * tests/misc/chroot-fail: New test. * tests/misc/env: Likewise. * tests/misc/nice-fail: Likewise. * tests/misc/su-fail: Likewise. * tests/Makefile.am (TESTS): Run new tests.
2009-10-23maint: move chroot testEric Blake
* tests/chroot/credentials: Move... * tests/misc/chroot-credentials: ...here, to reduce number of directories. * tests/Makefile.am (root_tests): Reflect rename.
2009-10-23tests: enhance stdbuf and timeout testsEric Blake
* tests/misc/timeout-parameters: Validate exact exit status. * tests/misc/stdbuf: Likewise. * tests/misc/timeout: Likewise. Use require_built_. * tests/misc/arch: Likewise.
2009-10-23nohup: use EXIT_CANCELED if not POSIXLY_CORRECTEric Blake
* src/nohup.c (NOHUP_FAILURE): Rename... (POSIX_NOHUP_FAILURE): ...to this. (main): Pay attention to POSIXLY_CORRECT, to determine whether to use status 125 or 127. * doc/coreutils.texi (nohup invocation): Document this. * NEWS: Likewise. * tests/misc/invalid-opt (exit_status): Adjust expected results. * tests/misc/help-version (expected_failure_status): Likewise. * tests/misc/nohup: Likewise.
2009-10-23chroot, env, nice, su: use EXIT_CANCELED for internal failureEric Blake
* src/chroot.c (main): Use EXIT_CANCELED, not EXIT_FAILURE. * src/env.c (main): Likewise. * src/nice.c (main): Likewise. * src/su.c (change_identity, main): Likewise. * doc/coreutils.texi (chroot invocation, env invocation) (nice invocation, su invocation): Document this. * NEWS: Likewise. * tests/misc/invalid-opt (exit_status): Adjust expected results. * tests/misc/help-version (expected_failure_status): Likewise.
2009-10-23tests: accommodate BSD getoptEric Blake
* tests/misc/invalid-opt (err_subst): Support alternate spelling.
2009-10-22tests: add a test for the `tail -f' race condition bugGiuseppe Scrivano
If new data becomes available between the initial read and when tail registers the inotify watch descriptors, ensure that it is read before a new event happens on the file. * tests/Makefile.am (TESTS): Add tail-2/inotify-race. * tests/tail-2/inotify-race: New file.
2009-10-21tests: ensure touch honors trailing slashEric Blake
* tests/touch/trailing-slash: New test. * tests/Makefile.am (TESTS): Run it.
2009-10-21md5sum, sha*sum, sum: line-buffer the printed checksumsPádraig Brady
* src/md5sum.c (main): Set stdout to line buffered mode to ensure parallel running instances don't intersperse their output. This adds 5% to the run time in the worst case of many zero length files, or 2% with standard file sizes. * src/sum.c (main): Likewise. * tests/misc/md5sum-parallel: New test for atomic output. * tests/Makefile.am: Reference it. * NEWS: Mention the fix
2009-10-17touch: add -h to change symlink timestamps, where supportedEric Blake
* src/touch.c (no_dereference): New flag variable. (longopts): Add -h/--no-dereference. (touch): Add symlink handling. (usage): Document new option. (main): Accept new option. * NEWS: Document it. * doc/coreutils.texi (touch invocation): Likewise. Also mention birthtime. * tests/touch/no-dereference: New test. * tests/Makefile.am (TESTS): Run it.
2009-10-17tests: abmon-align: avoid test failureJim Meyering
* tests/ls/abmon-align: Don't remove (1d;) the first line of output. That was making the test consider only 11 of 12 month names. Rewrite not to use \(.*\), as that provoked a malfunction in GNU sed on powerpc Mac OS X (though we don't know yet whether this is due to a sed bug, or to miscompilation). Nelson Beebe reported the test failure.
2009-10-10copy: allow symlink timestamp preservation on more systemsEric Blake
* src/copy.c (utimens_symlink): Simplify by using lutimens. * m4/jm-macros.m4 (coreutils_MACROS): Drop utimensat; gnulib does this for us. * tests/cp/preserve-slink-time: Recognize lutimes support.
2009-10-10tests: adjust tail-2/pid to work around FreeBSD 6.1 failureJim Meyering
* tests/tail-2/pid: Run tail -f --pid=... on an actual file, not on /dev/null, to avoid this failure on FreeBSD 6.1: tail: /dev/null: cannot change nonblocking mode: Inappropriate ioctl for device
2009-10-08stat: test recent patchEric Blake
* tests/misc/stat-slash: New test. * tests/Makefile.am (TESTS): Run it.
2009-10-07md5sum, sha*sum: also accept openssl checksum syntaxGuenter Knauf
* src/md5sum.c (split_3): Accept openssl checksum syntax, which differs only by two spaces from that of the bsd checksum tools: openssl: MD5(f)= d41d8cd98f00b204e9800998ecf8427e bsd: MD5 (f) = d41d8cd98f00b204e9800998ecf8427e
2009-10-02tail: avoid a race where we could miss new data with --pidPádraig Brady
* src/tail.c (tail_forever, tail_forever_inotify): Close a race in tail_forever_inotify where new data written after the file check by a now dead process, but before the pid check, is not output. We use the POSIX guarantee that read() and write() are serialized wrt each other even in separate processes, to assume full file consistency after exit() and so poll for new data _after_ the writer has exited. This also allows us to not redundantly _wait_ for new data if the process is dead. * tests/tail-2/pid: Remove the now partially invalid sub second sleep check as we now don't unconditionally wait, and replace it with a check for the redundant sleep. Also clarify some of the existing comments. * NEWS: Mention the fix.
2009-09-30tests: tail-2/pid: use a 3-second timeout, not 1Jim Meyering
* tests/tail-2/pid: When using the timeout program to ensuring that tail -s.1 --pid=$PID_T_MAX does not wait forever, use a timeout longer than 1 second. A 1-second timeout could be too short on a very busy system, and result in a timeout, and hence false-positive failure. 2009-09-30 Jim Meyering <meyering@redhat.com>
2009-09-30ls: always print "?" for allocated size of a dereferenced dangling symlinkPádraig Brady
Previously for `ls -Ls` (but not `ls -Lsl`), we referenced the st_blocks returned from the previous failed stat() call. This undefined value was seen to be 0 for dangling symlinks at least. * src/ls.c (print_file_name_and_frills, length_of_file_name_and_frills): Don't use st_blocks if the previous stat() failed * tests/ls/dangle: Add a test case * NEWS: Mention the fix, and roll up related items into a single entry.
2009-09-29stat: interpret "-" as standard inputJim Meyering
* src/stat.c (do_stat): Interpret a command line argument of "-" to mean "standard input", like many other tools do. (do_statfs): Fail upon any attempt to use "-". * NEWS (Changes in behavior): Mention it. * tests/misc/stat-hyphen: New test, to exercise the above. * tests/Makefile.am (TESTS): Add misc/stat-hyphen.
2009-09-29ls: print "?", not "0" as inode of dereferenced dangling symlinkJim Meyering
ls prints inode numbers two ways: for long (-l) listings, and for short ones, e.g., ls -li and ls -i. The code to print long listings properly printed "?" when the inode was unknown, but the code for handling short listings would print 0 instead. Factor out the formatting code into a new function so ls prints the right string ("?") from both places: * NEWS (Bug fixes): Mention it. * src/ls.c (format_inode): New function. (print_long_format): Use it here. (print_file_name_and_frills): Use it here, too. * tests/ls/dangle: Exercise this fix. Reported by Yang Ren in http://bugzilla.redhat.com/525400
2009-09-29ls: with -LR, exit with status 2 upon detecting a cycleJim Meyering
* src/ls.c (print_dir): Diagnosing the cycle is not enough. Also set exit status to 2. This is what Solaris' /bin/ls does, too. * tests/ls/infloop: Rework test: match both expected stdout and stderr. Require an exit status of 2 in this case. * doc/coreutils.texi (ls invocation): Mention that a loop provokes in an exit status of 2. * NEWS (Bug fixes): Mention it. Reported by Yang Ren in http://bugzilla.redhat.com/525402. * THANKS: Correct ordering of Yang Ren's names.
2009-09-25ln: add -L/-P optionsEric Blake
* src/ln.c (STAT_LIKE_LINK): Delete. (logical): New flag. (long_options): Add -L, -P. (usage): Mention them. (main): Choose between them. (do_link): Perform correct action. * tests/ln/misc: Move hard-to-sym portion of test... * tests/ln/hard-to-sym: ...into new test, and add more. * tests/Makefile.am (TESTS): Run new test. * NEWS: Document this. * doc/coreutils.texi (link invocation, ln invocation): Likewise. * bootstrap.conf (gnulib_modules): Add linkat.
2009-09-23readlink: pick up gnulib changes to readlink -fEric Blake
* bootstrap.conf (obsolete_gnulib_modules): Move rename... (gnulib_modules): ...here. Add symlink. * NEWS: Document the change in readlink. * doc/coreutils.texi (readlink invocation): Likewise. * tests/readlink/can-f: Update test to new semantics, and add test of loop.
2009-09-21ls: handle disabling of colors consistently for all tile typesPádraig Brady
* src/ls.c (print_color_indicator): Use consistent syntax for all file and directory subtypes, and fall back to the color of the base type if there is no enabled color for the subtype. This allows turning off specific colors for o+w dirs for example. * tests/ls/color-dtype-dir: Add a case to test that turning off coloring for o+w directories, falls back to standard dir color. * NEWS: Mention the fix Introduced by commit ac467814, 2005-09-05, "Colorize set-user-ID ... files and sticky ... directories."
2009-09-14touch: don't reject "60" as number of seconds in a legacy time stampJim Meyering
A valid command like "touch -t 197101010000.60 F" would fail due to the suffix of ".60". This bug is fixed via the latest change to gnulib's posixtm module. * tests/touch/60-seconds: New test. * tests/Makefile.am (TESTS): Add it. * NEWS (Bug fixes): Mention it.
2009-09-14maint: use #!/bin/sh consistently in shell-based test scriptsJim Meyering
* tests/misc/sort-continue: Change first line to standard #!/bin/sh, not #!/bin/bash (though it doesn't matter, since each is invoked via $(SHELL) dir/test-name.
2009-09-14tests: fix dd/skip-seek-past-file to work on ecryptfsPádraig Brady
* tests/dd/skip-seek-past-file: Require sparse support to ensure that when we're checking if we can create an $OFF_T_MAX length file, that we don't actually allocate any space. This was an issue on ecryptfs and was reported by Bert Wesarg.
2009-09-14cp,mv: preserve extended attributes even for read-only filesOndřej Vašík
* src/copy.c (copy_reg): Temporarily set u+rw on the destination file to allow GNU/Linux to set xattrs. * tests/misc/xattr: Test that change. * NEWS (Bug fixes): Mention it. Reported by Ernest N. Mamikonyan.
2009-09-11id: don't print context=... when POSIXLY_CORRECT is setJim Meyering
* src/id.c (print_full_info) [POSIXLY_CORRECT]: Don't print context. Reported by Ulrich Drepper. * NEWS (Changes in behavior): Mention it. * doc/coreutils.texi (id invocation): Document that id also prints the security context, when possible, and when POSIXLY_CORRECT is not set. * tests/id/no-context: New file. Test for this. * tests/Makefile.am (TESTS): Add it.
2009-09-11rm: rewrite to use ftsJim Meyering
* remove.c: Don't include "unlinkdir.h"; no longer used. Do not include <setjmp.h> or "cycle-check.h". Likewise. Include "xfts.h". (dir_name, dir_len): Remove definitions. (CONSECUTIVE_READDIR_UNLINK_THRESHOLD): Likewise. (INODE_SORT_DIR_ENTRIES_THRESHOLD, NEED_REWIND, D_TYPE): Likewise. (struct dirstack_state, Dirstack_state): Likewise. (g_buf, g_n_allocated): Remove declarations. (hash_freer, hash_compare_strings, rm_malloc): Remove functions. (rm_free, push_dir, top_dir, pop_dir, right_justify): Likewise. (full_filename0, xfull_filename, full_filename_): Likewise. (AD_stack_height, AD_stack_top, AD_stack_pop, AD_stack_clear): Likewise. (obstack_init_minimal, ds_init, ds_clear, ds_free): Likewise. (AD_pop_and_chdir, AD_ensure_initialized, AD_mark_helper): Likewise. (AD_mark_as_unremovable, AD_mark_current_as_unremovable): Likewise. (AD_push_initial, AD_push, AD_push, AD_is_removable): Likewise. (write_protected_non_symlink): Change 3rd parameter from dirstack_state "ds" to full_name. (prompt): Adjust parameters. Now, state comes from FTS/FTSENT pair. Those replace fd_cwd and "ds". Remove "filename". Remove pdirent_type in favor of new "is_dir" parameter. Rename is_empty to is_empty_p. (DO_RMDIR, DO_UNLINK): Remove definitions. (remove_entry, fd_to_subdirp, compare_ino): Remove functions. (dirent_count, dirent_inode_sort_may_be_useful): Likewise. (preprocess_dir): Likewise. (fts_skip_tree, mark_ancestor_dirs, excise, rm_fts): New functions. (remove_cwd_entries, remove_dir, rm_1): Remove functions. (rm): Rewrite as a simple loop calling fts_read and dispatching each entry via rm_fts. * src/rm.c (main): Adapt to new signature of rm(). * bootstrap.conf (gnulib_modules): Remove unlinkdir, no longer used. * src/Makefile.am (sc_tight_scope): Also recognize an extern "enum" declaration. * tests/rm/empty-name: Adjust expected output to match new diagnostic. * NEWS (Improvements): Mention it.
2009-09-10link,ln: use gnulib's link module to work around Solaris 10 deficiencyJim Meyering
Before this change, :>f; ln -T f no-such/ would succeed on Solaris 10. After it, ln fails, as it should: ln: accessing `z/': Not a directory The command, link f no-such/, had the same problem on that system. * bootstrap.conf (gnulib_modules): Add "link". * tests/ln/slash-decorated-nonexistent-dest: New test. * tests/Makefile.am (TESTS): Add it. * NEWS (Portability): Mention the improvement.
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-28 14:06:19 +0000