| Age | Commit message (Collapse) | Author |
|---|
|
Not only this shrinks the size of the generated Makefile (from > 6300
lines to ~3000), but will allow further simplifications in future
changes.
* tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'.
(PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to
$(LOG_COMPILER) for the time being.
(TESTS, root_tests): Adjust as described.
* All tests: Rename as described.
|
|
* tests/rm/isatty: Remove now-unneeded "# `" line.
* tests/misc/ls-time: Likewise.
* tests/misc/date-sec: Remove stray "`" in comment.
* tests/du/long-sloop: Likewise.
* tests/mv/part-symlink: Replace multi-line `...` by $(...).
* tests/mv/sticky-to-xpart: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/ls/nameless-uid: Likewise.
* tests/cp/perm: Likewise.
* tests/cp/preserve-gid: Likewise.
* tests/cp/same-file: Likewise.
|
|
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
|
|
Run "make update-copyright".
|
|
Exempt lines with '$' or '=', since those are prone to improper
conversion. Run this:
git grep -l "\`[^']*'" tests \
|xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
|
|
Run "make update-copyright".
|
|
Those were useful when tests might have been run in the same
directory and in parallel. Now, each test is run in a newly-
created empty directory.
* tests/cp/backup-1: Remove obsolete uses of "$$".
* tests/cp/same-file: Likewise.
* tests/dd/misc: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/to-symlink: Likewise.
* tests/touch/fail-diag: Likewise.
|
|
Run "make update-copyright".
|
|
* cfg.mk (LINE_LEN_MAX, FILTER_LONG_LINES): New macros.
(sc_long_lines): New rule.
* HACKING: Use shorter URLs to the same material.
* doc/Makefile.am, doc/coreutils.texi, m4/boottime.m4:
* man/help2man, man/stdbuf.x, src/Makefile.am, src/cat.c, src/copy.c:
* src/cp.c, src/dd.c, src/df.c, src/du.c, src/groups.c, src/install.c:
* src/ls.c, src/md5sum.c, src/mv.c, src/od.c, src/pinky.c, src/ptx.c:
* src/readlink.c, src/remove.c, src/rmdir.c, src/setuidgid.c:
* src/sort.c, src/tail.c, src/touch.c, tests/Coreutils.pm:
* tests/cp/existing-perm-race, tests/cp/perm, tests/cp/preserve-gid:
* tests/du/2g, tests/du/long-from-unreadable, tests/init.sh:
* tests/install/basic-1, tests/ls/nameless-uid:
* tests/ls/readdir-mountpoint-inode, tests/misc/chroot-credentials:
* tests/misc/cut, tests/misc/date, tests/misc/join, tests/misc/md5sum:
* tests/misc/sha1sum, tests/misc/sha224sum, tests/misc/sort:
* tests/misc/sort-continue, tests/misc/sort-files0-from:
* tests/misc/sort-rand, tests/misc/stdbuf, tests/misc/tr:
* tests/misc/uniq, tests/mv/atomic, tests/mv/part-fail:
* tests/mv/part-symlink, tests/mv/sticky-to-xpart, tests/pr/pr-tests:
* tests/rm/fail-2eperm, tests/rm/interactive-always:
Reformat to fit within 80 columns.
* doc/Makefile.am (BAD_POSIX_PERL): New macro.
* doc/coreutils.texi: Reword slightly, to make menus and
index lines shorter.
* src/md5sum.c: Redo --help output so that it fits within 79
columns, since that's a bit more portable and all the other --help
strings fit in 79 columns.
|
|
E.g.,
-test "$VERBOSE" = yes && { env -- pwd --version; readlink --version; }
+print_ver_ pwd readlink
-test "$VERBOSE" = yes && { stdbuf --version; mv --version; }
+print_ver_ stdbuf mv
Use this command:
git grep -l 'VERBOSE.*--version'|xargs perl -ni \
-e '/^test "\$VERBOSE" = yes && { .*--version/ or print,next;' \
-e 's/env -- //g;' \
-e 's/test "\$VERBOSE" = yes && { /print_ver_ /;' \
-e ' s/(\w+) --version;/$1/g; s/ *}$//; print'
|
|
RHS='. "\${srcdir=.}/init.sh"; path_prepend_ ../src'
git grep -l test-lib.sh \
| xargs perl -pi -e 's,^\. \$srcdir/test-lib\.sh$,'"$RHS",
|
|
|
|
All tests currently pass on NFS on Linux kernel 2.6.22 at least,
but some fail on 2.6.9, so we exclude those here.
* tests/init.cfg (is_local_dir_): A new function
returning if the specified directory is on a local file system.
(require_local_dir_): A new function to skip tests
if the current directory is not on a local file system.
* tests/cp/existing-perm-race: Skip if non local.
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/du/basic: Use refactored function.
* tests/install/basic-1: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/dd/skip-seek-past-dev: Likewise.
* tests/du/slink: Likewise. Remove redundant test
for NFS file system.
* tests/misc/join: s/local/locale/.
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
|
|
* tests/misc/xattr: Add quotes.
* tests/mv/acl: Likewise.
* tests/mv/backup-is-src: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
|
|
Transformed via this shell code:
t=$'\t'
git ls-files \
| grep -vE '(^|/)((GNU)?[Mm]akefile|ChangeLog)|\.(am|mk)$' \
| grep -vE 'tests/pr/|help2man' \
| xargs grep -lE "^ *$t" \
| xargs perl -MText::Tabs -ni -le \
'$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
|
|
|
|
* tests/misc/help-version: Fix bad quoting.
* tests/cp/same-file: Fix unportable shell quoting.
* tests/mv/part-symlink: Likewise.
|
|
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
|
|
|
|
so that e.g., tests/* may refer to absolute names without
hard-coding the name of the containing directory (tests/, here).
* tests/check.mk (TESTS_ENVIRONMENT): Define abs_srcdir.
* tests/pr/pr-tests: Use $abs_srcdir/pr not $abs_top_srcdir/tests/pr.
* tests/chmod/c-option: Use $abs_srcdir, not $abs_top_srcdir/tests.
* tests/cp/cp-parents: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/mv/acl: Likewise.
* tests/mv/backup-is-src: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/into-self-2: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/mv/to-symlink: Likewise.
* tests/rm/one-file-system: Likewise.
* tests/sample-test: Likewise.
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ...
... rather than in each of 100+ test scripts.
* tests/chgrp/basic:
* tests/chgrp/no-x:
* tests/chmod/c-option:
* tests/chmod/no-x:
* tests/chmod/setgid:
* tests/chmod/thru-dangling:
* tests/chmod/umask-x:
* tests/chmod/usage:
* tests/chown/basic:
* tests/chown/deref:
* tests/chown/preserve-root:
* tests/cp/abuse:
* tests/cp/acl:
* tests/cp/backup-is-src:
* tests/cp/cp-a-selinux:
* tests/cp/cp-i:
* tests/cp/cp-mv-backup:
* tests/cp/deref-slink:
* tests/cp/fail-perm:
* tests/cp/into-self:
* tests/cp/link-preserve:
* tests/cp/preserve-gid:
* tests/cp/same-file:
* tests/cp/slink-2-slink:
* tests/cp/special-f:
* tests/cp/symlink-slash:
* tests/cp/thru-dangling:
* tests/du/basic:
* tests/du/hard-link:
* tests/du/inacc-dest:
* tests/du/long-sloop:
* tests/du/no-x:
* tests/install/basic-1:
* tests/ln/hard-backup:
* tests/ln/sf-1:
* tests/ls/file-type:
* tests/ls/infloop:
* tests/ls/nameless-uid:
* tests/ls/rt-1:
* tests/ls/stat-failed:
* tests/ls/symlink-slash:
* tests/ls/x-option:
* tests/misc/chcon:
* tests/misc/chcon-fail:
* tests/misc/csplit:
* tests/misc/df-P:
* tests/misc/groups-dash:
* tests/misc/groups-version:
* tests/misc/nohup:
* tests/misc/printf-surprise:
* tests/misc/runcon-no-reorder:
* tests/misc/selinux:
* tests/misc/split-a:
* tests/misc/split-fail:
* tests/misc/tac-continue:
* tests/misc/wc-files0:
* tests/mkdir/p-v:
* tests/mkdir/selinux:
* tests/mv/acl:
* tests/mv/backup-dir:
* tests/mv/backup-is-src:
* tests/mv/childproof:
* tests/mv/diag:
* tests/mv/dir2dir:
* tests/mv/dup-source:
* tests/mv/force:
* tests/mv/hard-link-1:
* tests/mv/hard-verbose:
* tests/mv/i-2:
* tests/mv/i-3:
* tests/mv/i-4:
* tests/mv/i-5:
* tests/mv/i-link-no:
* tests/mv/into-self:
* tests/mv/into-self-2:
* tests/mv/into-self-3:
* tests/mv/mv-special-1:
* tests/mv/part-fail:
* tests/mv/part-symlink:
* tests/mv/partition-perm:
* tests/mv/perm-1:
* tests/mv/reply-no:
* tests/mv/sticky-to-xpart:
* tests/mv/update:
* tests/rm/cycle:
* tests/rm/dir-no-w:
* tests/rm/dir-nonrecur:
* tests/rm/fail-2eperm:
* tests/rm/fail-eacces:
* tests/rm/inaccessible:
* tests/rm/interactive-always:
* tests/rm/interactive-once:
* tests/rm/isatty:
* tests/rm/one-file-system:
* tests/rm/r-1:
* tests/rm/r-2:
* tests/rm/rm1:
* tests/rm/rm2:
* tests/rm/rm3:
* tests/rm/rm4:
* tests/rm/rm5:
* tests/rm/unread2:
* tests/rm/v-slash:
* tests/touch/fail-diag:
* tests/touch/not-owner:
|
|
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
|
|
|
|
* tests/other-fs-tmpdir: Before, all callers would exit 77 upon failure to
find the required dir. Now, exit 77 in this script so callers don't have to.
Adjust callers.
|
|
|
|
|
|
Suggested by Steve McIntyre in <http://bugs.debian.org/392925>.
* src/remove.h (struct rm_options) [one_file_system]: New member.
* src/rm.c (rm_option_init): Initialize it.
(usage): Document the option.
* src/mv.c (rm_option_init): Likewise.
* src/remove.c (remove_dir): With --one-file-system and --recursive,
for each directory command line argument, do not affect a file system
different from that of the starting directory. And give a diagnostic.
* src/rm.c (ONE_FILE_SYSTEM): New enum.
(main): Handle new option.
* tests/rm/one-file-system: Test the above.
* tests/rm/Makefile.am (TESTS): Add one-file-system.
* tests/Makefile.am (check-root): Add the rm/one-file-system
test to the list.
(EXTRA_DIST): Add other-fs-tmpdir.
* tests/mv/setup: Removed. Renamed to...
* tests/other-fs-tmpdir: ...this new file.
* tests/mv/Makefile.am (EXTRA_DIST): Remove setup.
* tests/mv/acl: Reflect renaming: use ../other-fs-tmpdir.
* tests/mv/backup-is-src: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/to-symlink: Likewise.
* tests/mv/into-self-2: Likewise.
[doc/ChangeLog]
* coreutils.texi (rm invocation): Describe --one-file-system.
|
|
tree paths. In the cleanup trap, make sure `cd' succeeds before
`chmod'ing and `rm'ing the temporary files.
* tests/chgrp/basic: Likewise.
* tests/chgrp/deref: Likewise.
* tests/chgrp/no-x: Likewise.
* tests/chgrp/posix-H: Likewise.
* tests/chgrp/recurse: Likewise.
* tests/chmod/c-option: Likewise.
* tests/chmod/equal-x: Likewise.
* tests/chmod/equals: Likewise.
* tests/chmod/inaccessible: Likewise.
* tests/chmod/no-x: Likewise.
* tests/chmod/octal: Likewise.
* tests/chmod/setgid: Likewise.
* tests/chmod/umask-x: Likewise.
* tests/chmod/usage: Likewise.
* tests/chown/basic: Likewise.
* tests/chown/deref: Likewise.
* tests/chown/separator: Likewise.
* tests/cp/acl: Likewise.
* tests/cp/backup-1: Likewise.
* tests/cp/backup-dir: Likewise.
* tests/cp/backup-is-src: Likewise.
* tests/cp/cp-HL: Likewise.
* tests/cp/cp-deref: Likewise.
* tests/cp/cp-i: Likewise.
* tests/cp/cp-mv-backup: Likewise.
* tests/cp/cp-parents: Likewise.
* tests/cp/deref-slink: Likewise.
* tests/cp/dir-rm-dest: Likewise.
* tests/cp/dir-slash: Likewise.
* tests/cp/dir-vs-file: Likewise.
* tests/cp/fail-perm: Likewise.
* tests/cp/into-self: Likewise.
* tests/cp/link: Likewise.
* tests/cp/link-no-deref: Likewise.
* tests/cp/link-preserve: Likewise.
* tests/cp/no-deref-link1: Likewise.
* tests/cp/no-deref-link2: Likewise.
* tests/cp/no-deref-link3: Likewise.
* tests/cp/perm: Likewise.
* tests/cp/preserve-2: Likewise.
* tests/cp/r-vs-symlink: Likewise.
* tests/cp/same-file: Likewise.
* tests/cp/slink-2-slink: Likewise.
* tests/cp/sparse: Likewise.
* tests/cp/special-bits: Likewise.
* tests/cp/src-base-dot: Likewise.
* tests/cp/symlink-slash: Likewise.
* tests/dd/not-rewound: Likewise.
* tests/dd/skip-seek2: Likewise.
* tests/dd/unblock-sync: Likewise.
* tests/du/2g: Likewise.
* tests/du/8gb: Likewise.
* tests/du/basic: Likewise.
* tests/du/deref: Likewise.
* tests/du/deref-args: Likewise.
* tests/du/exclude: Likewise.
* tests/du/fd-leak: Likewise.
* tests/du/hard-link: Likewise.
* tests/du/inaccessible-cwd: Likewise.
* tests/du/long-from-unreadable: Likewise.
* tests/du/long-sloop: Likewise.
* tests/du/no-deref: Likewise.
* tests/du/no-x: Likewise.
* tests/du/restore-wd: Likewise.
* tests/du/slash: Likewise.
* tests/du/slink: Likewise.
* tests/du/trailing-slash: Likewise.
* tests/du/two-args: Likewise.
* tests/fmt/long-line: Likewise.
* tests/install/basic-1: Likewise.
* tests/install/create-leading: Likewise.
* tests/install/d-slashdot: Likewise.
* tests/install/trap: Likewise.
* tests/ln/misc: Likewise.
* tests/ln/target-1: Likewise.
* tests/ls/color-dtype-dir: Likewise.
* tests/ls/dangle: Likewise.
* tests/ls/dired: Likewise.
* tests/ls/file-type: Likewise.
* tests/ls/follow-slink: Likewise.
* tests/ls/infloop: Likewise.
* tests/ls/inode: Likewise.
* tests/ls/m-option: Likewise.
* tests/ls/no-arg: Likewise.
* tests/ls/recursive: Likewise.
* tests/ls/rt-1: Likewise.
* tests/ls/stat-dtype: Likewise.
* tests/ls/stat-failed: Likewise.
* tests/ls/stat-vs-dirent: Likewise.
* tests/misc/cat-proc: Likewise.
* tests/misc/close-stdout: Likewise.
* tests/misc/csplit: Likewise.
* tests/misc/date-sec: Likewise.
* tests/misc/false-status: Likewise.
* tests/misc/head-c: Likewise.
* tests/misc/head-pos: Likewise.
* tests/misc/mknod: Likewise.
* tests/misc/nl: Likewise.
* tests/misc/nohup: Likewise.
* tests/misc/pathchk1: Likewise.
* tests/misc/printf: Likewise.
* tests/misc/printf-hex: Likewise.
* tests/misc/pwd-long: Likewise.
* tests/misc/shuf: Likewise.
* tests/misc/sort-rand: Likewise.
* tests/misc/split-a: Likewise.
* tests/misc/split-fail: Likewise.
* tests/misc/split-l: Likewise.
* tests/misc/stat-fmt: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/misc/wc-files0: Likewise.
* tests/mkdir/concurrent-1: Likewise.
* tests/mkdir/p-1: Likewise.
* tests/mkdir/p-2: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/mkdir/p-slashdot: Likewise.
* tests/mkdir/p-thru-slink: Likewise.
* tests/mkdir/p-v: Likewise.
* tests/mkdir/parents: Likewise.
* tests/mkdir/perm: Likewise.
* tests/mkdir/t-slash: Likewise.
* tests/mv/acl: Likewise.
* tests/mv/atomic: Likewise.
* tests/mv/backup-dir: Likewise.
* tests/mv/childproof: Likewise.
* tests/mv/diag: Likewise.
* tests/mv/dir-file: Likewise.
* tests/mv/dir2dir: Likewise.
* tests/mv/dup-source: Likewise.
* tests/mv/hard-2: Likewise.
* tests/mv/hard-3: Likewise.
* tests/mv/hard-4: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/hard-verbose: Likewise.
* tests/mv/i-2: Likewise.
* tests/mv/i-3: Likewise.
* tests/mv/i-4: Likewise.
* tests/mv/i-5: Likewise.
* tests/mv/i-link-no: Likewise.
* tests/mv/into-self-4: Likewise.
* tests/mv/leak-fd: Likewise.
* tests/mv/mv-special-1: Likewise.
* tests/mv/no-target-dir: Likewise.
* tests/mv/part-fail: Likewise.
* tests/mv/part-hardlink: Likewise.
* tests/mv/part-rename: Likewise.
* tests/mv/part-symlink: Likewise.
* tests/mv/partition-perm: Likewise.
* tests/mv/perm-1: Likewise.
* tests/mv/reply-no: Likewise.
* tests/mv/trailing-slash: Likewise.
* tests/mv/update: Likewise.
* tests/od/od-N: Likewise.
* tests/od/x8: Likewise.
* tests/readlink/can-e: Likewise.
* tests/readlink/can-f: Likewise.
* tests/readlink/can-m: Likewise.
* tests/readlink/rl-1: Likewise.
* tests/rm/cycle: Likewise.
* tests/rm/dangling-symlink: Likewise.
* tests/rm/deep-1: Likewise.
* tests/rm/dir-no-w: Likewise.
* tests/rm/dir-nonrecur: Likewise.
* tests/rm/dot-rel: Likewise.
* tests/rm/empty-inacc: Likewise.
* tests/rm/f-1: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/rm/hash: Likewise.
* tests/rm/i-1: Likewise.
* tests/rm/i-no-r: Likewise.
* tests/rm/ignorable: Likewise.
* tests/rm/inaccessible: Likewise.
* tests/rm/interactive-always: Likewise.
* tests/rm/interactive-once: Likewise.
* tests/rm/ir-1: Likewise.
* tests/rm/isatty: Likewise.
* tests/rm/no-give-up: Likewise.
* tests/rm/r-1: Likewise.
* tests/rm/r-2: Likewise.
* tests/rm/r-3: Likewise.
* tests/rm/r-4: Likewise.
* tests/rm/readdir-bug: Likewise.
* tests/rm/rm1: Likewise.
* tests/rm/rm2: Likewise.
* tests/rm/rm3: Likewise.
* tests/rm/rm4: Likewise.
* tests/rm/rm5: Likewise.
* tests/rm/sunos-1: Likewise.
* tests/rm/unread2: Likewise.
* tests/rm/unread3: Likewise.
* tests/rmdir/fail-perm: Likewise.
* tests/rmdir/t-slash: Likewise.
* tests/shred/exact: Likewise.
* tests/shred/remove: Likewise.
* tests/sum/sysv: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/tail-2/assert: Likewise.
* tests/tail-2/assert-2: Likewise.
* tests/tail-2/big-4gb: Likewise.
* tests/tail-2/fflush: Likewise.
* tests/tail-2/infloop-1: Likewise.
* tests/tail-2/proc-ksyms: Likewise.
* tests/tail-2/start-middle: Likewise.
* tests/tail-2/tail-n0f: Likewise.
* tests/tee/basic: Likewise.
* tests/tee/dash: Likewise.
* tests/touch/fail-diag: Likewise.
* tests/touch/no-create-missing: Likewise.
* tests/touch/not-owner: Likewise.
* tests/touch/obsolescent: Likewise.
* tests/touch/read-only: Likewise.
* tests/touch/relative: Likewise.
|
|
|
|
`(exit N); exit N'. Otherwise, those many tests could exit with
improper exit status when exiting via e.g., a trapped interrupt.
Thanks to a report from Bob Proulx.
|
|
|
|
|
|
CDPATH shell variable set could cause this test to fail.
|
|
in ls output: instead, omit that field altogether.
|
|
the setting/exporting of LANG, LC_ALL, and LANGUAGE.
|
|
and translations. Bruno Haible reported that this test would fail
when using other locales, because ls printed a translation of `total'.
|
|
Clean up.
|
|
remove the temp directory. Otherwise, the `rm -rf' would get an
error because the output file wouldn't be closed and the directory
wouldn't be `empty'.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
