| Age | Commit message (Collapse) | Author |
|---|
|
Not only this shrinks the size of the generated Makefile (from > 6300
lines to ~3000), but will allow further simplifications in future
changes.
* tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'.
(PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to
$(LOG_COMPILER) for the time being.
(TESTS, root_tests): Adjust as described.
* All tests: Rename as described.
|
|
Exempt init.sh because it runs before we're assured to have a
shell that groks $(...). Exempt *.mk because "$" would have to
be doubled, and besides, any `...` expression in a .mk file is
almost certainly evaluated before init.sh is run. Finally, also
exempt the perl-based tests, because perl's `...` cannot be
converted to $(...). Do that by running this command:
git grep -l '`.*`' tests \
| grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \
| xargs perl -pi -e 's/`(.*?)`/\$($1)/g'
One minor fix-up change was required after that, due to how
quoting differs:
diff --git a/tests/chmod/equals b/tests/chmod/equals
- expected_perms=$(eval 'echo \$expected_'$dest)
+ expected_perms=$(eval 'echo $expected_'$dest)
Another was to make these required quoting adjustments:
diff --git a/tests/misc/stty b/tests/misc/stty
...
- rev=$(eval echo "\\\$REV_$opt")
+ rev=$(eval echo "\$REV_$opt")
...
- rev1=$(eval echo "\\\$REV_$opt1")
- rev2=$(eval echo "\\\$REV_$opt2")
+ rev1=$(eval echo "\$REV_$opt1")
+ rev2=$(eval echo "\$REV_$opt2")
Also, transform two files that were needlessly excluded above:
(both use perl, but are mostly bourne shell)
perl -pi -e 's/`(.*?)`/\$($1)/g' \
tests/du/long-from-unreadable tests/init.cfg
|
|
Run "make update-copyright".
|
|
Run "make update-copyright".
|
|
Run "make update-copyright".
|
|
Automatically make all of the changes like this:
-test "$VERBOSE" = yes && chgrp --version
+print_ver_ chgrp
git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \
's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
|
|
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
|
|
* cfg.mk (sc_fail_is_initialized): New rule.
Fix the offenders:
* tests/cp/acl: Set fail=0
* tests/cp/backup-is-src: Likewise.
* tests/cp/file-perm-race: Likewise.
* tests/cp/reflink-auto: Likewise.
* tests/cp/same-file: Likewise.
* tests/ln/backup-1: Likewise.
* tests/misc/su-fail: Likewise.
* tests/misc/truncate-owned-by-other: Likewise.
* tests/mkdir/p-3: Likewise.
* tests/mkdir/selinux: Likewise.
* tests/mkdir/special-1: Likewise.
* tests/mv/acl: Likewise.
* tests/mv/backup-is-src: Likewise.
* tests/mv/diag: Likewise.
* tests/mv/force: Likewise.
* tests/mv/hard-link-1: Likewise.
* tests/mv/into-self-3: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/touch/now-owned-by-other: Likewise.
|
|
|
|
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
|
|
|
|
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
|
|
* maint.mk (sc_require_test_exit_idiom): New rule to enforce policy.
* tests/cp/acl: Adhere to the new policy.
* tests/cp/preserve-gid: Likewise.
* tests/dd/misc:
* tests/install/create-leading:
* tests/ln/sf-1:
* tests/ls/symlink-slash:
* tests/misc/help-version:
* tests/misc/ls-time:
* tests/misc/nice:
* tests/misc/shred-remove:
* tests/misc/stty:
* tests/misc/stty-row-col:
* tests/mkdir/p-1:
* tests/mkdir/p-2:
* tests/mkdir/p-3:
* tests/mkdir/p-v:
* tests/mkdir/special-1:
* tests/mkdir/writable-under-readonly:
* tests/mv/acl:
* tests/mv/backup-is-src:
* tests/mv/diag:
* tests/mv/dir-file:
* tests/mv/force:
* tests/mv/hard-link-1:
* tests/mv/i-2:
* tests/mv/i-4:
* tests/mv/into-self:
* tests/mv/into-self-2:
* tests/mv/into-self-3:
* tests/mv/partition-perm:
* tests/mv/to-symlink:
* tests/rmdir/ignore:
* tests/tail-2/assert:
* tests/tail-2/assert-2:
* tests/touch/dangling-symlink:
* tests/touch/dir-1:
* tests/touch/empty-file:
* tests/touch/fifo:
* tests/touch/no-rights: Likewise.
Signed-off-by: Jim Meyering <meyering@redhat.com>
|
|
|
|
|
|
|
|
I started with the patches from Red Hat.
The entries below tell how the code evolved.
* src/ls.c (print_long_format, print_file_name_and_frills): When
there is no security context (due to getfilecon/lgetfilecon failing
with e.g. ENOTSUP), print it as "?", not "".
* src/ls.c (print_file_name_and_frills): Make -Z work without -l.
(length_of_file_name_and_frills): Likewise.
* src/ls.c: Remove the --lcontext and --scontext options.
Change the way -Z, --context work so that it no longer implies -l.
Thus, -Z -l will work like -lcontext and -Z without -l will work
like --scontext.
Adjust tests to reflect new 'ls -l' syntax -- affects only
systems with SELinux when operating on a file with no ACL.
These tests assumed that everything before the first space on
each line is the 10-byte mode string. But there may also be a "+"
in the 11th column, just before the space. However, note that this
is not new. The same thing would have happened even without the
change below, when listing a file with an ACL.
* tests/chmod/equals, tests/cp/cp-parents, tests/cp/fail-perm:
* tests/cp/link-preserve, tests/install/basic-1, tests/misc/mknod:
* tests/mkdir/parents, tests/mkdir/special-1, tests/mv/partition-perm:
Don't make compilation depend on USE_ACL. An SELinux security
context counts as an "alternate access control method", so ls
must output a "+" for each file with a security context.
* src/ls.c [struct fileinfo] (have_acl): Declare unconditionally.
(FILE_HAS_ACL): Remove macro definition. Use f->have_acl directly.
(gobble_file): Record whether a file has a security context, and
update the condition used to determine whether to print the "+".
(gobble_file): Call getfilecon/lgetfilecon also when
format == long_format, so that we get the "+".
* src/ls.c (gobble_file): Add a comment explaining why (with a
security context option) ls doesn't exit nonzero due to e.g.,
getfilecon failing with errno == ENOTSUP.
* src/ls.c (gobble_file): Ignore failure of getfilecon if it's due
to ENOTSUP.
* src/ls.c (gobble_file): Factor out three small blocks using
getfilecon and lgetfilecon.
Don't ignore return value from getfilecon and lgetfilecon.
* src/ls.c (print_long_format): Don't use ?: (empty 2nd arg with C
ternary operator).
(print_scontext_format): Likewise.
(print_scontext): Declare to be "bool", not int. Adjust uses.
* src/Makefile.am (dir_LDADD, ls_LDADD, vdir_LDADD): Add $(LIB_SELINUX).
* tests/misc/chcon: New file.
* tests/misc/chcon-fail: New file.
* tests/Makefile.am (check-root): Run new, root-only misc/chcon test.
* tests/misc/Makefile.am (TESTS): Add chcon and chcon-fail.
* tests/misc/Makefile.am (TESTS): Add selinux.
* tests/misc/selinux: New file.
* tests/help-version: Skip chcon.
|
|
|
|
directory has them set and they're inherited.
|
|
|
|
|
|
|
|
|
|
|
