Age | Commit message (Collapse) | Author |
|
Not only this shrinks the size of the generated Makefile (from > 6300
lines to ~3000), but will allow further simplifications in future
changes.
* tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'.
(PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to
$(LOG_COMPILER) for the time being.
(TESTS, root_tests): Adjust as described.
* All tests: Rename as described.
|
|
* tests/misc/printf-surprise: A VM size of 10,000KiB was too
little in which to run "env printf ..." on FreeBSD 9.0-p3.
Increase it to 15,000.
|
|
Run "make update-copyright".
|
|
* tests/misc/printf-surprise: Also accept a strerror-style string
after the usual 'printf: write error:' diagnostic prefix.
Otherwise, this test would fail on HP-UX 11.
Reported by Bruno Haible.
|
|
* tests/cp/existing-perm-race: s/mkfifo/mkfifo_or_skip_/
* tests/cp/file-perm-race: Likewise.
* tests/cp/parent-perm-race: Likewise.
* tests/cp/special-f: Likewise.
* tests/dd/reblock: Likewise.
* tests/ls/file-type: Likewise.
* tests/misc/cat-buf: Likewise.
* tests/misc/mknod: Likewise.
* tests/misc/printf-surprise: Likewise.
* tests/misc/selinux: Likewise.
* tests/misc/sort-spinlock-abuse: Likewise.
* tests/misc/stdbuf: Likewise.
* tests/misc/tac-continue: Likewise.
* tests/init.cfg: Improve the error message when skipping.
|
|
Run "make update-copyright".
|
|
E.g.,
-test "$VERBOSE" = yes && env -- pwd --version
+print_ver_ pwd
git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \
's/test "\$VERBOSE" = yes && env -- (\w+) --version/print_ver_ $1/'
|
|
RHS='. "\${srcdir=.}/init.sh"; path_prepend_ ../src'
git grep -l test-lib.sh \
| xargs perl -pi -e 's,^\. \$srcdir/test-lib\.sh$,'"$RHS",
|
|
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
|
|
|
|
* tests/misc/printf-surprise: Disable MALLOC_PERTURB_, so that "make
check" no longer provokes a segfault from printf(1). Before, that
would be detected as a known problem and cause the test to be skipped.
Adjust the test so that a segfault once again results in test failure.
|
|
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
|
|
* tests/misc/printf-surprise: Accept bogus prefix on stderr output.
|
|
|
|
* tests/misc/printf-surprise: Detect case of a low-memory-provoked
segfault and skip the test (this is actually a bug in snprintf).
For details, see http://bugs.debian.org/481543
|
|
* tests/Coreutils.pm: tiny clean-up: s/env/env --/
* tests/misc/help-version: Use "env" rather than an absolute file
name prefix.
* tests/misc/printf-surprise: Likewise.
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ...
... rather than in each of 100+ test scripts.
* tests/chgrp/basic:
* tests/chgrp/no-x:
* tests/chmod/c-option:
* tests/chmod/no-x:
* tests/chmod/setgid:
* tests/chmod/thru-dangling:
* tests/chmod/umask-x:
* tests/chmod/usage:
* tests/chown/basic:
* tests/chown/deref:
* tests/chown/preserve-root:
* tests/cp/abuse:
* tests/cp/acl:
* tests/cp/backup-is-src:
* tests/cp/cp-a-selinux:
* tests/cp/cp-i:
* tests/cp/cp-mv-backup:
* tests/cp/deref-slink:
* tests/cp/fail-perm:
* tests/cp/into-self:
* tests/cp/link-preserve:
* tests/cp/preserve-gid:
* tests/cp/same-file:
* tests/cp/slink-2-slink:
* tests/cp/special-f:
* tests/cp/symlink-slash:
* tests/cp/thru-dangling:
* tests/du/basic:
* tests/du/hard-link:
* tests/du/inacc-dest:
* tests/du/long-sloop:
* tests/du/no-x:
* tests/install/basic-1:
* tests/ln/hard-backup:
* tests/ln/sf-1:
* tests/ls/file-type:
* tests/ls/infloop:
* tests/ls/nameless-uid:
* tests/ls/rt-1:
* tests/ls/stat-failed:
* tests/ls/symlink-slash:
* tests/ls/x-option:
* tests/misc/chcon:
* tests/misc/chcon-fail:
* tests/misc/csplit:
* tests/misc/df-P:
* tests/misc/groups-dash:
* tests/misc/groups-version:
* tests/misc/nohup:
* tests/misc/printf-surprise:
* tests/misc/runcon-no-reorder:
* tests/misc/selinux:
* tests/misc/split-a:
* tests/misc/split-fail:
* tests/misc/tac-continue:
* tests/misc/wc-files0:
* tests/mkdir/p-v:
* tests/mkdir/selinux:
* tests/mv/acl:
* tests/mv/backup-dir:
* tests/mv/backup-is-src:
* tests/mv/childproof:
* tests/mv/diag:
* tests/mv/dir2dir:
* tests/mv/dup-source:
* tests/mv/force:
* tests/mv/hard-link-1:
* tests/mv/hard-verbose:
* tests/mv/i-2:
* tests/mv/i-3:
* tests/mv/i-4:
* tests/mv/i-5:
* tests/mv/i-link-no:
* tests/mv/into-self:
* tests/mv/into-self-2:
* tests/mv/into-self-3:
* tests/mv/mv-special-1:
* tests/mv/part-fail:
* tests/mv/part-symlink:
* tests/mv/partition-perm:
* tests/mv/perm-1:
* tests/mv/reply-no:
* tests/mv/sticky-to-xpart:
* tests/mv/update:
* tests/rm/cycle:
* tests/rm/dir-no-w:
* tests/rm/dir-nonrecur:
* tests/rm/fail-2eperm:
* tests/rm/fail-eacces:
* tests/rm/inaccessible:
* tests/rm/interactive-always:
* tests/rm/interactive-once:
* tests/rm/isatty:
* tests/rm/one-file-system:
* tests/rm/r-1:
* tests/rm/r-2:
* tests/rm/rm1:
* tests/rm/rm2:
* tests/rm/rm3:
* tests/rm/rm4:
* tests/rm/rm5:
* tests/rm/unread2:
* tests/rm/v-slash:
* tests/touch/fail-diag:
* tests/touch/not-owner:
|
|
* tests/chmod/thru-dangling: Source lang-default.
* tests/cp/thru-dangling: Likewise.
* tests/misc/printf-surprise: Likewise.
|
|
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
|
|
Reported by Bob Proulx.
|
|
* tests/test-lib.sh (require_ulimit_): New function.
* tests/misc/printf-surprise: Use ulimit -v to trigger the fixed bug,
and rather than checking printf's exit status (which would go wrong
on FreeBSD 6.1, since their printf(3) function doesn't require
lots of memory in this case) simply test whether it outputs
the first 10 bytes.
|
|
* tests/misc/printf-surprise: New file. Test for 2007-10-21's fix.
* tests/misc/Makefile.am (TESTS): Add printf-surprise.
|