summaryrefslogtreecommitdiff
path: root/tests/cp/cp-a-selinux
AgeCommit message (Collapse)Author
2012-08-30tests: add .sh and .pl suffixes to shell and perl tests, respectivelyStefano Lattarini
Not only this shrinks the size of the generated Makefile (from > 6300 lines to ~3000), but will allow further simplifications in future changes. * tests/Makefile.am (TEST_EXTENSIONS): Add '.sh' and '.pl'. (PL_LOG_COMPILER, SH_LOG_COMPILER): New, still defined simply to $(LOG_COMPILER) for the time being. (TESTS, root_tests): Adjust as described. * All tests: Rename as described.
2012-04-04tests: convert nearly all `...` expressions to $(...)Jim Meyering
Exempt init.sh because it runs before we're assured to have a shell that groks $(...). Exempt *.mk because "$" would have to be doubled, and besides, any `...` expression in a .mk file is almost certainly evaluated before init.sh is run. Finally, also exempt the perl-based tests, because perl's `...` cannot be converted to $(...). Do that by running this command: git grep -l '`.*`' tests \ | grep -Ev 'init\.sh|\.mk$' | xargs grep -Lw perl \ | xargs perl -pi -e 's/`(.*?)`/\$($1)/g' One minor fix-up change was required after that, due to how quoting differs: diff --git a/tests/chmod/equals b/tests/chmod/equals - expected_perms=$(eval 'echo \$expected_'$dest) + expected_perms=$(eval 'echo $expected_'$dest) Another was to make these required quoting adjustments: diff --git a/tests/misc/stty b/tests/misc/stty ... - rev=$(eval echo "\\\$REV_$opt") + rev=$(eval echo "\$REV_$opt") ... - rev1=$(eval echo "\\\$REV_$opt1") - rev2=$(eval echo "\\\$REV_$opt2") + rev1=$(eval echo "\$REV_$opt1") + rev2=$(eval echo "\$REV_$opt2") Also, transform two files that were needlessly excluded above: (both use perl, but are mostly bourne shell) perl -pi -e 's/`(.*?)`/\$($1)/g' \ tests/du/long-from-unreadable tests/init.cfg
2012-01-09tests: change `...' to '...' on lines not matching /[=\$]/Jim Meyering
Exempt lines with '$' or '=', since those are prone to improper conversion. Run this: git grep -l "\`[^']*'" tests \ |xargs perl -pi -e '/[=\$]/ and next;s/\`([^'\''"]*?'\'')/'\''$1/g'
2012-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2011-12-01tests: adjust PATH to generally include /sbin and /usr/sbinBernhard Voelker
Commit 5eeaca94 added /sbin to the PATH for tests using mkfs. For other tests, e.g. tests/cp-fiemap-perf using filefrag, we need /usr/sbin also. Add both directories generally for the tests, "since many of us always augment our PATH with all of the sbin paths all of the time anyway" (Bob in http://lists.gnu.org/archive/html/coreutils/2011-11/msg00107.html). The previous commit is hereby obsolete. * tests/init.cfg (sanitize_path_): Add /sbin and /usr/sbin to PATH unless already included. Needed for tests using admin tools like mkfs and filefrag on systems where the user's environment does not have these directories in the PATH. * tests/init.cfg (require_mkfs_PATH_): Remove obsolete function. * tests/cp/cp-a-selinux: Remove require_mkfs_PATH_ call. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/sparse-fiemap: Likewise. * tests/mkdir/writable-under-readonly: Likewise. * tests/rm/read-only: Likewise.
2011-11-22tests: use "compare exp out", not "compare out exp"Jim Meyering
Likewise, when an empty file is expected, use "compare /dev/null out", not "compare out /dev/null". I.e., specify the expected/desired contents via the first file name. Prompted by a suggestion from Bruno Haible in http://thread.gmane.org/gmane.comp.gnu.grep.bugs/4020/focus=29154 Run these commands: git grep -l -E 'compare [^ ]+ exp' \ |xargs perl -pi -e 's/(compare) (\S+) (exp\S*)/$1 $3 $2/' git grep -l -E 'compare [^ ]+ /dev/null' \ |xargs perl -pi -e 's/(compare) (\S+) (\/dev\/null)/$1 $3 $2/' * tests/chgrp/no-x: As above. * tests/chmod/no-x: Likewise. * tests/chmod/silent: Likewise. * tests/chmod/thru-dangling: Likewise. * tests/chown/basic: Likewise. * tests/chown/deref: Likewise. * tests/chown/preserve-root: Likewise. * tests/cp/abuse: Likewise. * tests/cp/backup-is-src: Likewise. * tests/cp/cp-a-selinux: Likewise. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/fail-perm: Likewise. * tests/cp/into-self: Likewise. * tests/cp/proc-zero-len: Likewise. * tests/cp/src-base-dot: Likewise. * tests/cp/thru-dangling: Likewise. * tests/dd/reblock: Likewise. * tests/dd/unblock-sync: Likewise. * tests/du/2g: Likewise. * tests/du/8gb: Likewise. * tests/du/basic: Likewise. * tests/du/bigtime: Likewise. * tests/du/deref-args: Likewise. * tests/du/exclude: Likewise. * tests/du/files0-from-dir: Likewise. * tests/du/hard-link: Likewise. * tests/du/inacc-dest: Likewise. * tests/du/inacc-dir: Likewise. * tests/du/long-sloop: Likewise. * tests/du/max-depth: Likewise. * tests/du/move-dir-while-traversing: Likewise. * tests/du/no-deref: Likewise. * tests/du/no-x: Likewise. * tests/du/one-file-system: Likewise. * tests/du/slash: Likewise. * tests/du/trailing-slash: Likewise. * tests/install/strip-program: Likewise. * tests/ln/hard-backup: Likewise. * tests/ls/block-size: Likewise. * tests/ls/color-clear-to-eol: Likewise. * tests/ls/color-dtype-dir: Likewise. * tests/ls/color-norm: Likewise. * tests/ls/dangle: Likewise. * tests/ls/dired: Likewise. * tests/ls/file-type: Likewise. * tests/ls/follow-slink: Likewise. * tests/ls/infloop: Likewise. * tests/ls/m-option: Likewise. * tests/ls/no-arg: Likewise. * tests/ls/recursive: Likewise. * tests/ls/rt-1: Likewise. * tests/ls/stat-dtype: Likewise. * tests/ls/stat-failed: Likewise. * tests/ls/stat-free-symlinks: Likewise. * tests/ls/x-option: Likewise. * tests/misc/arch: Likewise. * tests/misc/cat-buf: Likewise. * tests/misc/cat-proc: Likewise. * tests/misc/chcon: Likewise. * tests/misc/csplit: Likewise. * tests/misc/df-P: Likewise. * tests/misc/fmt-long-line: Likewise. * tests/misc/groups-dash: Likewise. * tests/misc/groups-version: Likewise. * tests/misc/head-pos: Likewise. * tests/misc/nl: Likewise. * tests/misc/od-N: Likewise. * tests/misc/od-multiple-t: Likewise. * tests/misc/od-x8: Likewise. * tests/misc/printf: Likewise. * tests/misc/printf-hex: Likewise. * tests/misc/pwd-option: Likewise. * tests/misc/readlink-fp-loop: Likewise. * tests/misc/runcon-no-reorder: Likewise. * tests/misc/seq-long-double: Likewise. * tests/misc/sort-NaN-infloop: Likewise. * tests/misc/sort-benchmark-random: Likewise. * tests/misc/sort-debug-keys: Likewise. * tests/misc/sort-float: Likewise. * tests/misc/sort-merge-fdlimit: Likewise. * tests/misc/sort-unique-segv: Likewise. * tests/misc/stat-hyphen: Likewise. * tests/misc/stat-slash: Likewise. * tests/misc/stdbuf: Likewise. * tests/misc/sum-sysv: Likewise. * tests/misc/tac-2-nonseekable: Likewise. * tests/misc/tac-continue: Likewise. * tests/misc/tr-case-class: Likewise. * tests/misc/truncate-fail-diag: Likewise. * tests/misc/wc-files0: Likewise. * tests/mkdir/selinux: Likewise. * tests/mv/backup-dir: Likewise. * tests/mv/backup-is-src: Likewise. * tests/mv/diag: Likewise. * tests/mv/dir2dir: Likewise. * tests/mv/dup-source: Likewise. * tests/mv/force: Likewise. * tests/mv/hard-verbose: Likewise. * tests/mv/i-link-no: Likewise. * tests/mv/into-self: Likewise. * tests/mv/into-self-2: Likewise. * tests/mv/into-self-3: Likewise. * tests/mv/mv-special-1: Likewise. * tests/mv/part-fail: Likewise. * tests/mv/perm-1: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/mv/trailing-slash: Likewise. * tests/rm/rm1: Likewise. * tests/rm/rm2: Likewise. * tests/rm/cycle: Likewise. * tests/rm/dir-no-w: Likewise. * tests/rm/dir-nonrecur: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/rm/fail-eacces: Likewise. * tests/rm/i-never: Likewise. * tests/rm/inaccessible: Likewise. * tests/rm/interactive-always: Likewise. * tests/rm/interactive-once: Likewise. * tests/rm/isatty: Likewise. * tests/rm/one-file-system: Likewise. * tests/rm/rm3: Likewise. * tests/rm/rm5: Likewise. * tests/rm/unread2: Likewise. * tests/rm/v-slash: Likewise. * tests/sample-test: Likewise. * tests/split/b-chunk: Likewise. * tests/split/fail: Likewise. * tests/split/l-chunk: Likewise. * tests/split/lines: Likewise. * tests/split/r-chunk: Likewise. * tests/split/suffix-length: Likewise. * tests/tail-2/big-4gb: Likewise. * tests/tail-2/follow-name: Likewise. * tests/tail-2/follow-stdin: Likewise. * tests/tail-2/pipe-f: Likewise. * tests/tail-2/pipe-f2: Likewise. * tests/tail-2/start-middle: Likewise. * tests/touch/60-seconds: Likewise. * tests/touch/fail-diag: Likewise. * tests/touch/not-owner: Likewise. * tests/touch/relative: Likewise.
2011-09-07tests: adjust PATH to include /sbin for mkfs-using testsBernhard Voelker
* tests/init.cfg (require_mkfs_PATH_): New function to test whether mkfs is in PATH, otherwise adding /sbin to PATH. Needed for distributions (OpenSuSE, Solaris) in which sudo does not include /sbin in PATH. * tests/cp/cp-a-selinux: Use require_mkfs_PATH_. * tests/cp/cp-mv-enotsup-xattr: Likewise. * tests/cp/sparse-fiemap: Likewise. * tests/mkdir/writable-under-readonly: Likewise. * tests/rm/read-only: Likewise.
2011-08-08tests: complete the renaming framework_failure -> framework_failure_Stefano Lattarini
These changes were mostly mechanical, made by running the following command: git grep -lw framework_failure | grep -v ChangeLog \ | xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/' and then editing init.cfg and `tests/cp/cp-a-selinux' by hand. * tests/init.cfg (framework_failure): Remove, `framework_failure_' from init.sh should be used instead in the tests. Remove now-obsolete "FIXME" comment. (is_local_dir_, require_strace_, require_membership_in_two_groups_, require_sparse_support_, skip_if_mcstransd_is_running_, mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'. * Many test scripts: Likewise.
2011-06-17tests: remove skip_test_ function; use new skip_ insteadJim Meyering
* tests/init.cfg (skip_test_): Remove function. Use skip_ in place of skip_test_ everywhere else. * cfg.mk (sc_prohibit_skip_): Remove rule. * tests/**: Use skip_, not skip_test_, everywhere.
2011-01-01maint: update all copyright year number rangesJim Meyering
Run "make update-copyright".
2010-11-17tests: substitute the single-program $VERBOSE/--version usesJim Meyering
Automatically make all of the changes like this: -test "$VERBOSE" = yes && chgrp --version +print_ver_ chgrp git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \ 's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
2010-11-17tests: convert first batch of tests from test-lib.sh to init.shJim Meyering
Initially, I did this, git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script' but that line would have been much longer than the maximum permitted by coreutils' commit hook, and wasn't readable besides, so here's a more readable version: lhs=$(printf '%s\\n' \ 'if test "$VERBOSE" = yes; then' \ ' set -x' \ ' touch --version' \ 'fi' \ '' \ '. $srcdir/test-lib.sh' \ | sed 's/\$/\\\$/g;s/touch/(\\w+)/') rhs=$(printf '%s\\n' \ '. "${srcdir=.}/init.sh"; path_prepend_ ../src' \ 'test "$VERBOSE" = yes && FIXME --version' \ | sed 's/\$/\\\$/g;s/FIXME/\$1/') git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
2010-05-21tests: fix cp-a-selinux to skip cleanly upon mkfs failureJim Meyering
* tests/cp/cp-a-selinux: Initialize skip, to avoid a syntax error in subsequent "test". Remove redirect-to-/dev/null, now that output is always to a log file.
2010-04-13cp: treat selinux warnings consistentlyPádraig Brady
* src/copy.c (copy_reg): Suppress SELinux ENOTSUP warnings consistently between the destination being present or not. Previously we did not suppress ENOTSUP messages when the destination was present. (copy_internal): Use the same ENOTSUP supression method as copy_reg() even though the issue was not seen in this case. * tests/cp/cp-a-selinux: Add a test case for the issue and group the other test cases in the file more coherently. * tests/cp/cp-mv-enotsup-xattr: Do the same check for xattr warnings, even though they did not have the issue.
2010-02-01tests: cp-a-selinux: skip the test if mounting a loop device failsOndřej Vašík
* tests/cp/cp-a-selinux: Skip the test (instead of fail) if we fail to mount a loop device (e.g., none available).
2010-01-01maint: update all FSF copyright year lists to include 2010Jim Meyering
Use this command: git ls-files | grep -v COPYING \ | xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \ build-aux/update-copyright
2009-10-30tests: factor 350 fail=0 initializations into test-lib.shJim Meyering
Run this command to remove the factored-out "fail=0" lines. perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$') * tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts. * tests/...: nearly all bourne shell scripts Suggested by Eric Blake.
2009-04-28tests: ensure that cp's -a doesn't silence --preserve=contextOndřej Vašík
* tests/cp/cp-a-selinux: Ensure that the -a option does not silence error diagnostics from --preserve=context, when preserving context is required.
2009-02-18cp: -a now preserves SELinux context, with reduced diagnosticsOndřej Vašík
* copy.c (copy_reg): Reduce SELinux context diagnostics for 'cp -a'. (copy_internal): Likewise * copy.h (cp_options): Add boolean reduce_diagnostics. * cp.c (usage): Say that --archive (-a) behaves like -dR --preserve=all. (cp_option_init): Initialize added reduce_diagnostics. (main): Add reduce_diagnostics for the -a option, and preserve SELinux context, if possible. * mv.c (cp_options_init): Initialize new cp_options booleans. * install.c (cp_option_init): Likewise. * NEWS: Mention those behaviour changes. * doc/coreutils.texi: Document --preserve=context, document that diagnostics are not shown for failures of non-mandatory attributes (just SELinux at the moment). * tests/cp/cp-a-selinux: Check not only failures, but succesful use of preserving SELinux context in cp.
2008-09-10tests: use "Exit $fail", not (exit $fail); exit $failJim Meyering
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63 * tests/**: Convert all uses: This restrictive change converted the vast majority: git grep -l '^(exit \$fail); exit \$fail$' \ | xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/' And this did the rest, plus a few undesirable ones, so I manually backed out the changes to ChangeLog-* and build-aux/check.mk: git grep -l -E '\(exit [^)]+\); exit ' \ | xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
2008-06-13skip (don't fail) root-only tests for common set-up failuresJim Meyering
Address 2 of 4 failures reported by Jarod Wilson in http://bugzilla.redhat.com/442352. More details here: http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/13803 * tests/cp/cp-a-selinux: Skip the test if "mkfs -t ext2" fails. * tests/rm/fail-2eperm: Skip the test if "rm" is not accessible.
2008-05-27in 280+ tests/* files, use $srcdir, not $top_srcdir/testsJim Meyering
2008-05-06tests: hoist the sourcing of "lang-default"Jim Meyering
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ... ... rather than in each of 100+ test scripts. * tests/chgrp/basic: * tests/chgrp/no-x: * tests/chmod/c-option: * tests/chmod/no-x: * tests/chmod/setgid: * tests/chmod/thru-dangling: * tests/chmod/umask-x: * tests/chmod/usage: * tests/chown/basic: * tests/chown/deref: * tests/chown/preserve-root: * tests/cp/abuse: * tests/cp/acl: * tests/cp/backup-is-src: * tests/cp/cp-a-selinux: * tests/cp/cp-i: * tests/cp/cp-mv-backup: * tests/cp/deref-slink: * tests/cp/fail-perm: * tests/cp/into-self: * tests/cp/link-preserve: * tests/cp/preserve-gid: * tests/cp/same-file: * tests/cp/slink-2-slink: * tests/cp/special-f: * tests/cp/symlink-slash: * tests/cp/thru-dangling: * tests/du/basic: * tests/du/hard-link: * tests/du/inacc-dest: * tests/du/long-sloop: * tests/du/no-x: * tests/install/basic-1: * tests/ln/hard-backup: * tests/ln/sf-1: * tests/ls/file-type: * tests/ls/infloop: * tests/ls/nameless-uid: * tests/ls/rt-1: * tests/ls/stat-failed: * tests/ls/symlink-slash: * tests/ls/x-option: * tests/misc/chcon: * tests/misc/chcon-fail: * tests/misc/csplit: * tests/misc/df-P: * tests/misc/groups-dash: * tests/misc/groups-version: * tests/misc/nohup: * tests/misc/printf-surprise: * tests/misc/runcon-no-reorder: * tests/misc/selinux: * tests/misc/split-a: * tests/misc/split-fail: * tests/misc/tac-continue: * tests/misc/wc-files0: * tests/mkdir/p-v: * tests/mkdir/selinux: * tests/mv/acl: * tests/mv/backup-dir: * tests/mv/backup-is-src: * tests/mv/childproof: * tests/mv/diag: * tests/mv/dir2dir: * tests/mv/dup-source: * tests/mv/force: * tests/mv/hard-link-1: * tests/mv/hard-verbose: * tests/mv/i-2: * tests/mv/i-3: * tests/mv/i-4: * tests/mv/i-5: * tests/mv/i-link-no: * tests/mv/into-self: * tests/mv/into-self-2: * tests/mv/into-self-3: * tests/mv/mv-special-1: * tests/mv/part-fail: * tests/mv/part-symlink: * tests/mv/partition-perm: * tests/mv/perm-1: * tests/mv/reply-no: * tests/mv/sticky-to-xpart: * tests/mv/update: * tests/rm/cycle: * tests/rm/dir-no-w: * tests/rm/dir-nonrecur: * tests/rm/fail-2eperm: * tests/rm/fail-eacces: * tests/rm/inaccessible: * tests/rm/interactive-always: * tests/rm/interactive-once: * tests/rm/isatty: * tests/rm/one-file-system: * tests/rm/r-1: * tests/rm/r-2: * tests/rm/rm1: * tests/rm/rm2: * tests/rm/rm3: * tests/rm/rm4: * tests/rm/rm5: * tests/rm/unread2: * tests/rm/v-slash: * tests/touch/fail-diag: * tests/touch/not-owner:
2008-04-30tests: avoid spurious "make check-root" failureJim Meyering
* README (Running tests as root): Also set PATH in suggested "sudo" command. This avoids failure of at least tests/cp/cp-a-selinux when the default PATH does not contain /sbin. * tests/cp/cp-a-selinux: Don't redirect stderr to /dev/null. "mkfs" was failing due to /sbin not being in PATH.
2008-04-21Revamp test-related Makefiles.Jim Meyering
One side-effect of this change is that "make check" now works even if you put "." early in your shell's search PATH (don't do that!). Remove all test-related Makefile.am files, except those generated by mk-script. Instead, tests/Makefile.am now lists not only the tests directly under tests/, but also those in tests/*/ that are not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc. A lot of these changes are like this: -. $srcdir/../lang-default +. $top_srcdir/tests/lang-default -. $srcdir/../test-lib.sh +. $top_srcdir/tests/test-lib.sh * configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles. * tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements. * tests/rwx-to-mode: Remove file. Rewritten as... * tests/test-lib.sh (rwx_to_mode_): ...this new function. * tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode. (SUBDIRS): Remove each dir with a removed Makefile.am. (EXTRA_DIST): Add $(TESTS). (TESTS): Add over 300 entries.
2008-04-01Avoid root-only SELinux-related test failures w/o mcstransd.Jim Meyering
When mcstransd is not running (i.e., after service mcstrans stop), "make check" as root would provoke two test failures. * tests/cp/cp-a-selinux: Use the context, root:object_r:tmp_t:s0, that works both with and without mcstransd. Thanks to Eric Paris for the tip and to Ondřej Vašík for alerting me to the problem. Reported by Robert Scheck in <http://bugzilla.redhat.com/436717>.
2008-02-09tests: Remove priv-check. Use new require_root_ function instead.Jim Meyering
* tests/priv-check: Remove file. * tests/Makefile.am (EXTRA_DIST): Remove priv-check. * tests/test-lib.sh (require_root_): New function. Use this function rather than sourcing the priv-check file. * tests/sample-test: Use require_root_ rather than priv-check. * tests/chown/basic: Likewise. * tests/cp/cp-a-selinux: Likewise. * tests/cp/preserve-gid: Likewise. * tests/cp/special-bits: Likewise. * tests/ls/nameless-uid: Likewise. * tests/misc/chcon: Likewise. * tests/mkdir/writable-under-readonly: Likewise. * tests/mv/sticky-to-xpart: Likewise. * tests/rm/fail-2eperm: Likewise. * tests/rm/no-give-up: Likewise. * tests/rm/one-file-system: Likewise. * tests/tail-2/append-only: Likewise. * tests/touch/now-owned-by-other: Likewise. * tests/rm/fail-eperm: Use skip_if_root_ rather than priv-check. * Makefile.maint (sc_root_tests): Reflect this change: search for the new function name.
2007-10-09Skip the chcon test on a system with no SELinux support.Jim Meyering
* tests/test-lib.sh (require_selinux_): New function. * tests/misc/chcon: Use it. * tests/misc/selinux: Use it here, too. * tests/cp/cp-a-selinux: and here. * tests/selinux: Remove file. * tests/Makefile.am (EXTRA_DIST): Remove selinux. Reported by Mike Frysinger and Bauke Jan Douma.
2007-09-15Adjust chgrp, chmod, chown, cp tests to use test-lib.sh.Jim Meyering
* tests/check.mk: Also define abs_top_builddir.
2007-07-23Update all copyright notices to use the newer form.Jim Meyering
2007-07-10Change "version 2" to "version 3" in all copyright notices.Jim Meyering
2007-03-29Arrange for "make check-root" to run the new root-only test.Jim Meyering
* tests/Makefile.am (t9): New target, to run tests/cp/cp-a-selinux. (all_t): Add t9. Use a directory on a loopback device mounted with -o context=... * tests/cp/cp-a-selinux: Since this test now runs mount and umount, it is a root-only one.
2007-03-29* tests/cp/cp-a-selinux: New file. Test for the bug reported inJim Meyering
* tests/cp/Makefile.am (TESTS): Add cp-a-selinux. * tests/selinux: New file. * tests/Makefile.am (EXTRA_DIST): Add selinux. * tests/misc/selinux: Source the new script, rather than open coding it. Change how "cp -a" and "cp --preserve=context" work with SELinux. Now, cp -a attempts to preserve context, but failure to do so does not change cp's exit status. However "cp --preserve=context" is similar, but failure *does* cause cp to exit with nonzero status. * src/copy.h (struct cp_options) [require_preserve_context]: New member. * src/copy.c (copy_reg, copy_internal): Implement the above. * src/mv.c (cp_option_init): Initialize the new member. * src/install.c (cp_option_init): Likewise. * src/cp.c (cp_option_init): Likewise. (decode_preserve_arg): Set it or reset it. FIXME: add an on-writable-NFS-only test
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-08-24 19:28:29 +0000