| Age | Commit message (Collapse) | Author |
|---|
|
* tests/init.cfg (require_mkfs_PATH_): New function to test whether mkfs
is in PATH, otherwise adding /sbin to PATH. Needed for distributions
(OpenSuSE, Solaris) in which sudo does not include /sbin in PATH.
* tests/cp/cp-a-selinux: Use require_mkfs_PATH_.
* tests/cp/cp-mv-enotsup-xattr: Likewise.
* tests/cp/sparse-fiemap: Likewise.
* tests/mkdir/writable-under-readonly: Likewise.
* tests/rm/read-only: Likewise.
|
|
These changes were mostly mechanical, made by running the
following command:
git grep -lw framework_failure | grep -v ChangeLog \
| xargs perl -pi -e 's/\b(framework_failure)\b/${1}_/'
and then editing init.cfg and `tests/cp/cp-a-selinux' by hand.
* tests/init.cfg (framework_failure): Remove, `framework_failure_'
from init.sh should be used instead in the tests.
Remove now-obsolete "FIXME" comment.
(is_local_dir_, require_strace_, require_membership_in_two_groups_,
require_sparse_support_, skip_if_mcstransd_is_running_,
mkfifo_or_skip_) Use `framework_failure_', not `framework_failure'.
* Many test scripts: Likewise.
|
|
* tests/init.cfg (skip_test_): Remove function.
Use skip_ in place of skip_test_ everywhere else.
* cfg.mk (sc_prohibit_skip_): Remove rule.
* tests/**: Use skip_, not skip_test_, everywhere.
|
|
Run "make update-copyright".
|
|
Automatically make all of the changes like this:
-test "$VERBOSE" = yes && chgrp --version
+print_ver_ chgrp
git grep -l 'VERBOSE.*--version'|xargs perl -pi -e \
's/test "\$VERBOSE" = yes && (\w+) --version/print_ver_ $1/'
|
|
Initially, I did this,
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e '~180-byte script'
but that line would have been much longer than the maximum permitted
by coreutils' commit hook, and wasn't readable besides, so here's a
more readable version:
lhs=$(printf '%s\\n' \
'if test "$VERBOSE" = yes; then' \
' set -x' \
' touch --version' \
'fi' \
'' \
'. $srcdir/test-lib.sh' \
| sed 's/\$/\\\$/g;s/touch/(\\w+)/')
rhs=$(printf '%s\\n' \
'. "${srcdir=.}/init.sh"; path_prepend_ ../src' \
'test "$VERBOSE" = yes && FIXME --version' \
| sed 's/\$/\\\$/g;s/FIXME/\$1/')
git grep -l srcdir/test-lib.sh|xargs perl -p0i -e "s,$lhs,$rhs,"
|
|
* tests/cp/cp-a-selinux: Initialize skip, to avoid a syntax error
in subsequent "test".
Remove redirect-to-/dev/null, now that output is always to a log file.
|
|
* src/copy.c (copy_reg): Suppress SELinux ENOTSUP warnings consistently
between the destination being present or not. Previously we did
not suppress ENOTSUP messages when the destination was present.
(copy_internal): Use the same ENOTSUP supression method as
copy_reg() even though the issue was not seen in this case.
* tests/cp/cp-a-selinux: Add a test case for the issue and
group the other test cases in the file more coherently.
* tests/cp/cp-mv-enotsup-xattr: Do the same check for xattr
warnings, even though they did not have the issue.
|
|
* tests/cp/cp-a-selinux: Skip the test (instead of fail) if we
fail to mount a loop device (e.g., none available).
|
|
Use this command:
git ls-files | grep -v COPYING \
| xargs env UPDATE_COPYRIGHT_USE_INTERVALS=1 \
build-aux/update-copyright
|
|
Run this command to remove the factored-out "fail=0" lines.
perl -ni -e '/^fail=0$/ or print' $(g grep -l '^fail=0$')
* tests/test-lib.sh: Initialize fail=0 here, not in 300+ scripts.
* tests/...: nearly all bourne shell scripts
Suggested by Eric Blake.
|
|
* tests/cp/cp-a-selinux: Ensure that the -a option does not silence
error diagnostics from --preserve=context, when preserving context
is required.
|
|
* copy.c (copy_reg): Reduce SELinux context diagnostics for 'cp -a'.
(copy_internal): Likewise
* copy.h (cp_options): Add boolean reduce_diagnostics.
* cp.c (usage): Say that --archive (-a) behaves like -dR --preserve=all.
(cp_option_init): Initialize added reduce_diagnostics.
(main): Add reduce_diagnostics for the -a option, and preserve SELinux
context, if possible.
* mv.c (cp_options_init): Initialize new cp_options booleans.
* install.c (cp_option_init): Likewise.
* NEWS: Mention those behaviour changes.
* doc/coreutils.texi: Document --preserve=context, document that
diagnostics are not shown for failures of non-mandatory attributes
(just SELinux at the moment).
* tests/cp/cp-a-selinux: Check not only failures, but succesful use
of preserving SELinux context in cp.
|
|
* tests/test-lib.sh (Exit): New function by Ralf Wildenhues in automake
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=20594c08f63
* tests/**: Convert all uses:
This restrictive change converted the vast majority:
git grep -l '^(exit \$fail); exit \$fail$' \
| xargs perl -pi -e 's/'^\(exit \$fail\); exit \$fail$/Exit \$fail/'
And this did the rest, plus a few undesirable ones, so I manually
backed out the changes to ChangeLog-* and build-aux/check.mk:
git grep -l -E '\(exit [^)]+\); exit ' \
| xargs perl -pi -e 's/\(exit (.+?)\); exit \1/Exit $1/'
|
|
Address 2 of 4 failures reported by Jarod Wilson in
http://bugzilla.redhat.com/442352. More details here:
http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/13803
* tests/cp/cp-a-selinux: Skip the test if "mkfs -t ext2" fails.
* tests/rm/fail-2eperm: Skip the test if "rm" is not accessible.
|
|
|
|
* tests/check.mk (TESTS_ENVIRONMENT): Source lang-default here, ...
... rather than in each of 100+ test scripts.
* tests/chgrp/basic:
* tests/chgrp/no-x:
* tests/chmod/c-option:
* tests/chmod/no-x:
* tests/chmod/setgid:
* tests/chmod/thru-dangling:
* tests/chmod/umask-x:
* tests/chmod/usage:
* tests/chown/basic:
* tests/chown/deref:
* tests/chown/preserve-root:
* tests/cp/abuse:
* tests/cp/acl:
* tests/cp/backup-is-src:
* tests/cp/cp-a-selinux:
* tests/cp/cp-i:
* tests/cp/cp-mv-backup:
* tests/cp/deref-slink:
* tests/cp/fail-perm:
* tests/cp/into-self:
* tests/cp/link-preserve:
* tests/cp/preserve-gid:
* tests/cp/same-file:
* tests/cp/slink-2-slink:
* tests/cp/special-f:
* tests/cp/symlink-slash:
* tests/cp/thru-dangling:
* tests/du/basic:
* tests/du/hard-link:
* tests/du/inacc-dest:
* tests/du/long-sloop:
* tests/du/no-x:
* tests/install/basic-1:
* tests/ln/hard-backup:
* tests/ln/sf-1:
* tests/ls/file-type:
* tests/ls/infloop:
* tests/ls/nameless-uid:
* tests/ls/rt-1:
* tests/ls/stat-failed:
* tests/ls/symlink-slash:
* tests/ls/x-option:
* tests/misc/chcon:
* tests/misc/chcon-fail:
* tests/misc/csplit:
* tests/misc/df-P:
* tests/misc/groups-dash:
* tests/misc/groups-version:
* tests/misc/nohup:
* tests/misc/printf-surprise:
* tests/misc/runcon-no-reorder:
* tests/misc/selinux:
* tests/misc/split-a:
* tests/misc/split-fail:
* tests/misc/tac-continue:
* tests/misc/wc-files0:
* tests/mkdir/p-v:
* tests/mkdir/selinux:
* tests/mv/acl:
* tests/mv/backup-dir:
* tests/mv/backup-is-src:
* tests/mv/childproof:
* tests/mv/diag:
* tests/mv/dir2dir:
* tests/mv/dup-source:
* tests/mv/force:
* tests/mv/hard-link-1:
* tests/mv/hard-verbose:
* tests/mv/i-2:
* tests/mv/i-3:
* tests/mv/i-4:
* tests/mv/i-5:
* tests/mv/i-link-no:
* tests/mv/into-self:
* tests/mv/into-self-2:
* tests/mv/into-self-3:
* tests/mv/mv-special-1:
* tests/mv/part-fail:
* tests/mv/part-symlink:
* tests/mv/partition-perm:
* tests/mv/perm-1:
* tests/mv/reply-no:
* tests/mv/sticky-to-xpart:
* tests/mv/update:
* tests/rm/cycle:
* tests/rm/dir-no-w:
* tests/rm/dir-nonrecur:
* tests/rm/fail-2eperm:
* tests/rm/fail-eacces:
* tests/rm/inaccessible:
* tests/rm/interactive-always:
* tests/rm/interactive-once:
* tests/rm/isatty:
* tests/rm/one-file-system:
* tests/rm/r-1:
* tests/rm/r-2:
* tests/rm/rm1:
* tests/rm/rm2:
* tests/rm/rm3:
* tests/rm/rm4:
* tests/rm/rm5:
* tests/rm/unread2:
* tests/rm/v-slash:
* tests/touch/fail-diag:
* tests/touch/not-owner:
|
|
* README (Running tests as root): Also set PATH in suggested "sudo"
command. This avoids failure of at least tests/cp/cp-a-selinux
when the default PATH does not contain /sbin.
* tests/cp/cp-a-selinux: Don't redirect stderr to /dev/null.
"mkfs" was failing due to /sbin not being in PATH.
|
|
One side-effect of this change is that "make check" now works even if
you put "." early in your shell's search PATH (don't do that!).
Remove all test-related Makefile.am files, except those generated
by mk-script. Instead, tests/Makefile.am now lists not only the
tests directly under tests/, but also those in tests/*/ that are
not generated by mk-script, e.g., cp/abuse, cp/acl, mv/i-1, etc.
A lot of these changes are like this:
-. $srcdir/../lang-default
+. $top_srcdir/tests/lang-default
-. $srcdir/../test-lib.sh
+. $top_srcdir/tests/test-lib.sh
* configure.ac (AC_CONFIG_FILES): Remove corresponding Makefiles.
* tests/check.mk (vc_exe_in_TESTS): Relax syntax requirements.
* tests/rwx-to-mode: Remove file. Rewritten as...
* tests/test-lib.sh (rwx_to_mode_): ...this new function.
* tests/Makefile.am (EXTRA_DIST): Remove rwx-to-mode.
(SUBDIRS): Remove each dir with a removed Makefile.am.
(EXTRA_DIST): Add $(TESTS).
(TESTS): Add over 300 entries.
|
|
When mcstransd is not running (i.e., after service mcstrans stop),
"make check" as root would provoke two test failures.
* tests/cp/cp-a-selinux: Use the context, root:object_r:tmp_t:s0,
that works both with and without mcstransd.
Thanks to Eric Paris for the tip and to Ondřej Vašík for alerting
me to the problem.
Reported by Robert Scheck in <http://bugzilla.redhat.com/436717>.
|
|
* tests/priv-check: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove priv-check.
* tests/test-lib.sh (require_root_): New function.
Use this function rather than sourcing the priv-check file.
* tests/sample-test: Use require_root_ rather than priv-check.
* tests/chown/basic: Likewise.
* tests/cp/cp-a-selinux: Likewise.
* tests/cp/preserve-gid: Likewise.
* tests/cp/special-bits: Likewise.
* tests/ls/nameless-uid: Likewise.
* tests/misc/chcon: Likewise.
* tests/mkdir/writable-under-readonly: Likewise.
* tests/mv/sticky-to-xpart: Likewise.
* tests/rm/fail-2eperm: Likewise.
* tests/rm/no-give-up: Likewise.
* tests/rm/one-file-system: Likewise.
* tests/tail-2/append-only: Likewise.
* tests/touch/now-owned-by-other: Likewise.
* tests/rm/fail-eperm: Use skip_if_root_ rather than priv-check.
* Makefile.maint (sc_root_tests): Reflect this change:
search for the new function name.
|
|
* tests/test-lib.sh (require_selinux_): New function.
* tests/misc/chcon: Use it.
* tests/misc/selinux: Use it here, too.
* tests/cp/cp-a-selinux: and here.
* tests/selinux: Remove file.
* tests/Makefile.am (EXTRA_DIST): Remove selinux.
Reported by Mike Frysinger and Bauke Jan Douma.
|
|
* tests/check.mk: Also define abs_top_builddir.
|
|
|
|
|
|
* tests/Makefile.am (t9): New target, to run tests/cp/cp-a-selinux.
(all_t): Add t9.
Use a directory on a loopback device mounted with -o context=...
* tests/cp/cp-a-selinux: Since this test now runs mount and umount,
it is a root-only one.
|
|
* tests/cp/Makefile.am (TESTS): Add cp-a-selinux.
* tests/selinux: New file.
* tests/Makefile.am (EXTRA_DIST): Add selinux.
* tests/misc/selinux: Source the new script, rather than open coding it.
Change how "cp -a" and "cp --preserve=context" work with SELinux.
Now, cp -a attempts to preserve context, but failure to do so does
not change cp's exit status. However "cp --preserve=context" is
similar, but failure *does* cause cp to exit with nonzero status.
* src/copy.h (struct cp_options) [require_preserve_context]: New member.
* src/copy.c (copy_reg, copy_internal): Implement the above.
* src/mv.c (cp_option_init): Initialize the new member.
* src/install.c (cp_option_init): Likewise.
* src/cp.c (cp_option_init): Likewise.
(decode_preserve_arg): Set it or reset it.
FIXME: add an on-writable-NFS-only test
|
