| Age | Commit message (Collapse) | Author |
|---|
|
* src/system.h (emit_stdin_note): A new function, refactoring
the usage note about the '-' FILE implying stdin.
* src/base64.c (usage): Use the new function to emit the
note in a standard location and with standard separation.
* src/cat.c (usage): Likewise.
* src/csplit.c (usage): Likewise.
* src/cut.c (usage): Likewise.
* src/expand.c (usage): Likewise.
* src/fmt.c (usage): Likewise.
* src/head.c (usage): Likewise.
* src/md5sum.c (usage): Likewise.
* src/nl.c (usage): Likewise.
* src/od.c (usage): Likewise.
* src/paste.c (usage): Likewise.
* src/pr.c (usage): Likewise.
* src/ptx.c (usage): Likewise.
* src/shred.c (usage): Likewise.
* src/shuf.c (usage): Likewise.
* src/sort.c (usage): Likewise.
* src/sum.c (usage): Likewise.
* src/tac.c (usage): Likewise.
* src/tail.c (usage): Likewise.
* src/tsort.c (usage): Likewise.
* src/unexpand.c (usage): Likewise.
* src/wc.c (usage): Likewise.
* src/join.c (usage): Adjust the separation used for
the message referring to FILE1 or FILE2 as stdin.
* src/comm.c (usage): Add a message using the same
wording (translation) as used in join.
* src/split.c (usage): Reword to using FILE rather than
INPUT, allowing use of emit_stdin_note(). Also remove
the mention of "fixed-size" pieces as this isn't now
always the case.
Fixes http://pad.lv/1450179
|
|
* src/coreutils.c (usage): include coreutils.h outside
the printf call, because if it's a macro you will get the error:
embedding a #include directive within macro arguments is not supported
|
|
* src/yes.c (main): Simplify the logic so that the
compiler can see this function always returns a value.
This was seen with GCC 5.0 in SINGLE_BINARY mode.
|
|
With GCC 5 and the newly added warnings from gnulib, ensure the
correct signed integer is passed for the printf format,
to avoid -Werror=format= failures.
|
|
* src/local.mk (src_ls_LDADD): Change from LIB_ACL to LIB_HAS_ACL.
|
|
* src/longlong.h: Sync with the latest longlong.h from libgmp to:
- Use __builtin_c[lt]zl on arm64.
- Fix sparc64 vis3 build failure due to missing __clz_tab.
- Avoid a clang build issue on mips.
- Support thumb2 arm 32 bit system.
* src/cfg.mk (sc_ensure_comma_after_id_est): Exclude longlong.h
to ease merges.
|
|
All warnings were of the form: "assuming signed overflow does not occur
when simplifying conditional to constant [-Werror=strict-overflow]"
* src/dd.c (cache_round): Use an appropriately sized unsigned type,
to avoid possibility of undefined signed overflow.
* src/mknod.c (main): Likewise.
* src/pr.c (pad_down): Likewise.
* src/wc.c (main): Likewise.
* src/tail.c (main): Assert that argc >= 0 thus allowing the
compiler to assume without implication that argc - optind
is positive.
|
|
* src/dircolors.hin: Add the MISSING entry, to indicate
this as a possibility in new templates output from dircolors,
and also to ease comparison with existing databases that
generally do define a MISSING entry.
|
|
* src/df.c (filter_mount_list): With -l, avoid stating remote mounts.
* init.cfg: Avoid test hangs with inaccessible remote mounts.
* tests/df/no-mtab-status.sh: Skip with inaccessible remote mounts.
* tests/df/skip-rootfs.sh: Likewise.
* tests/df/total-verify.sh: Likewise.
* NEWS: Mention the bug fix.
Reported at http://bugzilla.redhat.com/1199679
|
|
Conditional jump or move depends on uninitialised value(s)
at 0x40380C: get_field_values (df.c:840)
by 0x403E16: get_dev (df.c:994)
by 0x404D65: get_all_entries (df.c:1364)
by 0x405926: main (df.c:1714)
* src/df.c (get_dev): Initialize the fsu.fsu_bavail_top_bit_set
member, when adding placeholder entries.
(main): Avoid a "definitely lost" memory leak warning from valgrind,
reported by Bernhard Voelker.
|
|
* src/ls.c (usage): Add punctuation to avoid ambiguity in the
description of the --time option. Mention that both the -u
and --sort=time default order is newest first.
|
|
* src/tail.c (tail_forever_inotify): Only monitor write()s and
truncate()s to files in --follow=descriptor mode, thus avoiding
the bug where we removed the watch on renamed files.
Also adjust the inotify event processing code that is
now significant only in --follow=name mode.
* tests/tail-2/F-vs-rename.sh: Improve this existing test by running
in both polling and inotify modes.
* tests/tail-2/f-vs-rename.sh: A new test based on the existing one.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug.
Fixes http://bugs.gnu.org/19760
|
|
Problem reported by Isaac Schwabacher in:
http://bugs.gnu.org/20214
* doc/coreutils.texi (nohup invocation): Clarify that when nohup's
stdin gets redirected, it's unreadable.
* doc/coreutils.texi (nohup invocation):
* src/nohup.c (usage): Don't promise /dev/null.
|
|
* src/ls.c (usage): Avoid the implication that the
default ls behavior is to --color=always.
Reported in http://bugs.debian.org/781208
|
|
* src/date.c (usage): Use FMT rather than TIMESPEC as the parameter,
since it's simpler to understand and can be better aligned.
Give an example for the --iso-8601 output format.
Adjust the example used for the 3 standard formats to be unambiguous
with respect to day/mon ordering and use of leading zeros in the time.
Reorder the options descriptions slightly, so that the
3 standards options are together.
Indent the multi-line descriptions so that grouping is obvious.
Remove a redundant description of the --rfc-3339 format,
which is obvious in the existing example.
Separate these 3 standards options to their own translatable string
to simplify translation.
Change 'date and time' to 'date/time' in the --iso-8601 description
to be consistent with --rfc-3339 and to help avoid the implication
that the time is always output or even output by default.
Fixes http://bugs.gnu.org/20203
|
|
* src/uniq.c (usage): The description was very confusing in the man page
due to the stripped newlines. Add punctuation for clarification.
|
|
* src/wc.c (wc): Allow any block to select the count implementation,
rather than just using the first 10 lines. This also simplifies
the code from 3 loops to 2.
|
|
* src/ls.c (usage): Mention that default order is largest first.
Fixes http://bugs.gnu.org/20172
|
|
Using a test file generated with:
yes | head -n100M > 2x100M.txt
before> time wc -l 2x100M.txt
real 0.842s
user 0.810s
sys 0.033s
after> time wc -l 2x100M.txt
real 0.142s
user 0.111s
sys 0.031s
* src/wc.c (wc): Split the loop that deals with -l into 3.
The first is used at the start of the input to determine if
the average line length is < 15, and if so the second loop is
used to look for '\n' internally to wc. For longer lines,
memchr is used as before to take advantage of system specific
optimizations which any outweigh function call overhead.
Note the first 2 loops could be combined, though in testing,
GCC 4.9.2 at least, wasn't sophisticated enough to separate
the loops based on the "check_len" invariant.
Note also __builtin_memchr() isn't significant here as
GCC currently only applies constant folding with that.
* NEWS: Mention the improvement.
|
|
* src/yes.c (main): Even when the internal buffer isn't large enough,
output what we've buffered already, and interate over the rest.
This improves the performance in the edge case where there are
many small arguments that overflow the buffer.
* tests/misc/yes.sh: Add a test case for the many small arguments case.
|
|
yes(1) may be used to generate repeating patterns of text
for test inputs etc., so adjust to be more efficient.
Profiling the case where yes(1) is outputting small items
through stdio (which was the default case), shows the overhead
of continuously processing small items in main() and in stdio:
$ yes >/dev/null & perf top -p $!
31.02% yes [.] main
27.36% libc-2.20.so [.] _IO_file_xsputn@@GLIBC_2.2.5
14.51% libc-2.20.so [.] fputs_unlocked
13.50% libc-2.20.so [.] strlen
10.66% libc-2.20.so [.] __GI___mempcpy
1.98% yes [.] fputs_unlocked@plta
Sending more data per stdio call improves the situation,
but still, there is significant stdio overhead due to memory copies,
and the repeated string length checking:
$ yes "`echo {1..1000}`" >/dev/null & perf top -p $!
42.26% libc-2.20.so [.] __GI___mempcpy
17.38% libc-2.20.so [.] strlen
5.21% [kernel] [k] __srcu_read_lock
4.58% [kernel] [k] __srcu_read_unlock
4.27% libc-2.20.so [.] _IO_file_xsputn@@GLIBC_2.2.5
2.50% libc-2.20.so [.] __GI___libc_write
2.45% [kernel] [k] system_call
2.40% [kernel] [k] system_call_after_swapgs
2.27% [kernel] [k] vfs_write
2.09% libc-2.20.so [.] _IO_do_write@@GLIBC_2.2.5
2.01% [kernel] [k] fsnotify
1.95% libc-2.20.so [.] _IO_file_write@@GLIBC_2.2.5
1.44% yes [.] main
We can avoid all stdio overhead by building up the buffer
_once_ and outputting that, and the profile below shows
the bottleneck moved to the kernel:
$ src/yes >/dev/null & perf top -p $!
15.42% [kernel] [k] __srcu_read_lock
12.98% [kernel] [k] __srcu_read_unlock
9.41% libc-2.20.so [.] __GI___libc_write
9.11% [kernel] [k] vfs_write
8.35% [kernel] [k] fsnotify
8.02% [kernel] [k] system_call
5.84% [kernel] [k] system_call_after_swapgs
4.54% [kernel] [k] __fget_light
3.98% [kernel] [k] sys_write
3.65% [kernel] [k] selinux_file_permission
3.44% [kernel] [k] rw_verify_area
2.94% [kernel] [k] __fsnotify_parent
2.76% [kernel] [k] security_file_permission
2.39% yes [.] main
2.17% [kernel] [k] __fdget_pos
2.13% [kernel] [k] sysret_check
0.81% [kernel] [k] write_null
0.36% yes [.] write@plt
Note this change also ensures that yes(1) will only write
complete lines for lines shorter than BUFSIZ.
* src/yes.c (main): Build up a BUFSIZ buffer of lines,
and output that, rather than having stdio process each item.
* tests/misc/yes.sh: Add a new test for various buffer sizes.
* tests/local.mk: Reference the new test.
Fixes http://bugs.gnu.org/20029
|
|
Adjust commit v8.23-140-gfdd6ebf to add the --output-error option
instead of --write-error, and treat open() errors like write() errors.
* doc/coreutils.texi (tee invocation): s/write-error/output-error/.
* src/tee.c (main): Exit on open() error if appropriate.
* tests/misc/tee.sh: Add a case to test open() errors.
* NEWS: Adjust for the more general output error behavior.
Suggested by Bernhard Voelker.
|
|
* src/ls.c (color_indicator[C_END]): Comment with the correct
sequence, which was used since commit v6.10-61-g483297d
Fixes http://bugs.gnu.org/19992
|
|
Note that IBRIX used to have a different magic number 0x013111A7
instead of the current 0x013111A8. However, the former is no longer
used and the version of IBRIX it was used in is really ancient, so
it's extremely unlikely anyone is still using it. Therefore, just
add the newer magic number.
Mark IBRIX as a 'remote' file system type as inotify support had
never been officially tested with it.
* src/stat.c (human_fstype): Add file system ID definition.
* NEWS: Mention the improvement.
Fixes http://bugs.gnu.org/19951
|
|
tee is very often used with pipes and this gives better control
when writing to them. There are 3 classes of file descriptors
that tee can write to: files(1), pipes(2), and early close pipes(3).
Handling write errors to 1 & 2 is supported at present with the caveat
that failure writing to any pipe will terminate tee immediately.
Handling write errors to type 3 is not currently supported.
To improve the supported combinations we add these options:
--write-error=warn
Warn if error writing any output including pipes.
Allows continued writing to still open files/pipes.
Exit status is failure if any output had error.
--write-error=warn-nopipe, -p
Warn if error writing any output except pipes.
Allows continued writing to still open files/pipes.
Exit status is failure if any non pipe output had error.
--write-error=exit
Exit if error writing any output including pipes.
--write-error=exit-nopipe
Exit if error writing any output except pipes.
Use the "nopipe" variants when files are of types 1 and 3, otherwise
use the standard variants with types 1 and 2. A caveat with the above
scheme is that a combination of pipe types (2 & 3) is not supported
robustly. I.e. if you use the "nopipe" variants when using both type
2 and 3 pipes, then any "real" errors on type 2 pipes will not be
diagnosed.
Note also a general issue with type 3 pipes that are not on tee's
stdout, is that shell constructs don't allow to distinguish early
close from real failures. For example `tee >(head -n1) | grep -m1 ..`
can't distinguish between an error or an early close in "head" pipe,
while the fail on the grep part of the pipe is distinguished
independently from the resulting pipe errors. This is a general
issue with the >() construct, rather than with tee itself.
* NEWS: Mention the new feature.
* doc/coreutils.texi (tee invocation): Describe the new option.
* src/tee.c (usage): Likewise.
(main): With --write-error ignore SIGPIPE, and handle
the various exit, diagnostics combinations.
* tests/misc/tee.sh: Tess all the new options.
Fixes http://bugs.gnu.org/11540
|
|
This is a cleanup to the previous commit v8.23-138-g7ceaf1d.
* src/tee.c (tee_files): Do not exempt the "-" file from being closed,
as this is no longer stdout but a normal file.
|
|
Since v5.2.1-1247-g8dafbe5, tee(1) treated '-' as stdout while POSIX
explicitly requires to treat this as a file name. Revert this change,
as the interleaved output - due to sending another copy of input to
stdout - is not considered to be useful. Discussed in
http://lists.gnu.org/archive/html/coreutils/2015-02/msg00085.html
* src/tee.c (tee_files): Remove the special handling for "-" operands.
(usage): Remove the corresponding sentence.
* doc/coreutils.texi (common options): Remove the "tee -" example.
(tee invocation): Document that tee(1) now treats "-" as a file name.
* tests/misc/tee.sh: Add a test case for "tee -".
While at it, re-indent the above multi-argument processing case and
extend that to 13 operands, as POSIX mandates that, too.
* tests/misc/tee-dash.sh: Remove now-obsolete test.
* tests/local.mk (all_tests): Remove the above test.
* NEWS (Changes in behavior): Mention the change.
|
|
* src/tee.c (main): Don't continue reading if we can't
output anywhere.
* tests/misc/tee.sh: Ensure we exit when no more outputs.
* NEWS: Mention the change in behavior.
|
|
* cfg.mk (sc_prohibit_strncmp): Improve the search pattern: use
_sc_search_regexp to find all invocations of strncmp except when
used on a macro definition line; just match the function name with
an opening parenthesis. Before, the expression missed places where
the comparison against 0 was in a subsequent line.
* src/system.h (STRNCMP_LIT): Shorten 'literal' to 'lit' to move
the whole definition of the macro into one line - thus making
sc_prohibit_strncmp pass.
(STRPREFIX): Add space before parenthesis.
* src/du.c (main): Prefer STREQ_LEN over strncmp.
* src/pinky.c (scan_entries): Likewise.
* src/tac.c (tac_seekable): Likewise.
* src/who.c (scan_entries): Likewise.
|
|
This setting is unusual on BSD as it's read normally in the local
flags returned by tcgetattr(), but can only be set with an ioctl.
Setting with tcsetattr() is ignored.
* src/stty.c (NO_SETATTR): A new flag to indicate the setting
is read and displayed like a normal termios flag, but is set
in some other manner.
(main): Skip tcsetattr() for this setting when this flag is set.
Also fixup the exiting 'extproc' processing to handle the
'-extproc' case correctly.
(sane_mode): Skip setting '-extproc' for 'sane' to avoid the error.
This isn't ideal but matches the operation of the BSD native stty.
|
|
* src/ls.c (align_nstrftime): Be defensive and validate the tm_mon
index before using to access the abmon array. This was _not_ seen
to be an issue any system. See https://bugzilla.redhat.com/1190454
|
|
* src/tail.c (main): Document another caveat with the
inotify implementation wrt multiple hardlinked files.
|
|
Each user has a maximum number of inotify watches,
so handle the cases where we exhaust these resources.
* src/tail.c (tail_forever_inotify): Ensure we inotify_rm_watch()
the watch for an inode, when replacing with a new watch for a name.
Return all used inotify resources when reverting to polling.
Revert to polling upon first indication of inotify resource exhaustion.
Revert to polling on any inotify resource exhaustion.
Diagnose resource exhaustion correctly in all cases.
Avoid redundant reinsertion in the hash for unchanged watches
(where only attributes of the file are changed).
* tests/tail-2/retry.sh: Avoid false failure when reverting to polling.
* tests/tail-2/inotify-rotate.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/inotify-rotate-resources.sh: New test to check
that we're calling inotify_rm_watch() for replaced files.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
* THANKS.in: Thanks for reporting and problem identification.
|
|
The -fsanitize=address run associated with v8.22-75-gf940fec
failed to check make-prime-list, as src/primes.h is not
regenerated with `make clean`. Running with -fsanitize=address
indicates a read 1 byte beyond the allocated buffer.
$ rm src/make-prime-list.o
$ make AM_CFLAGS=-fsanitize=address src/make-prime-list
$ src/make-prime-list 5000
=================================================================
==13913==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x61e00000fa43 at pc 0x4016f5 bp 0x7fff9d9840e0 sp 0x7fff9d9840d0
READ of size 1 at 0x61e00000fa43 thread T0
#0 0x4016f4 in main src/make-prime-list.c:214
#1 0x7f98892c5fdf in __libc_start_main (/lib64/libc.so.6+0x1ffdf)
#2 0x401774 (src/make-prime-list+0x401774)
0x61e00000fa43 is located 0 bytes to the right of 2499-byte
region [0x61e00000f080,0x61e00000fa43) allocated by thread T0 here:
#0 0x7f98896ba7b7 in malloc (/lib64/libasan.so.1+0x577b7)
#1 0x400f3f in xalloc src/make-prime-list.c:163
#2 0x400f3f in main src/make-prime-list.c:198
SUMMARY: AddressSanitizer: heap-buffer-overflow
src/make-prime-list.c:214 main
Shadow bytes around the buggy address:
0x0c3c7fff9ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c3c7fff9f40: 00 00 00 00 00 00 00 00[03]fa fa fa fa fa fa fa
0x0c3c7fff9f50: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f60: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f70: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f90: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
...
==13913==ABORTING
* src/make-prime-list.c (main): Bounds check the incremented index,
before using to access the buffer.
Fixes http://bugs.gnu.org/19784
|
|
* src/dircolors.hin: Remove deprecated anx, axa, axv. Add opus.
Suggested by Scott Teal.
|
|
To align with all other places (and correct grammar), change all
upper-case "I.E." to "I.e.". Furthermore, ensure that "i.e." is
followed by a comma. Finally, ensure to use a double-space before
"I.e.," at the beginning of a sentence.
The following was used to change all offending uses (apart from
old ChangeLog files):
$ git grep -liF 'i.e.' \
| xargs sed -i \
-e 's/I\.E\./I.e./g' \
-e 's/\. \(I\.e\.\)/. \1/g' \
-e 's/\([Ii]\.e\.\)\( \)/\1,\2/g' \
-e 's/\([Ii]\.e\.\)$/\1,/g'
* cfg.mk (sc_prohibit_uppercase_id_est): Add new rule.
(sc_ensure_double_space_after_dot_before_id_est): Likewise.
(sc_ensure_comma_after_id_est): Likewise.
(old_NEWS_hash): Refresh hash via "make update-NEWS-hash".
* NEWS: Change use of "id est" abbreviation via the above command.
* README: Likewise.
* README-prereq: Likewise.
* doc/coreutils.texi: Likewise.
* gl/lib/rand-isaac.c: Likewise.
* gl/lib/tempname.c.diff: Likewise.
* man/stdbuf.x: Likewise.
* src/cat.c: Likewise.
* src/copy.c: Likewise.
* src/copy.h: Likewise.
* src/cp.c: Likewise.
* src/cut.c: Likewise.
* src/dd.c: Likewise.
* src/df.c: Likewise.
* src/fiemap.h: Likewise.
* src/longlong.h: Likewise.
* src/ls.c: Likewise.
* src/numfmt.c: Likewise.
* src/pr.c: Likewise.
* src/shred.c: Likewise.
* src/shuf.c: Likewise.
* src/split.c: Likewise.
* tests/Coreutils.pm: Likewise.
* tests/df/df-symlink.sh: Likewise.
* tests/df/skip-rootfs.sh: Likewise.
* tests/init.sh: Likewise.
* tests/ls/color-norm.sh: Likewise.
* tests/misc/basename.pl: Likewise.
* tests/misc/ls-misc.pl: Likewise.
* tests/misc/md5sum-bsd.sh: Likewise.
* tests/misc/shred-exact.sh: Likewise.
* tests/misc/sort.pl: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/misc/tac-continue.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
|
|
* src/md5sum.c (usage): Detail the reasons for the default
double space between checksum and file name.
* doc/coreutils.texi (md5sum invocation): Likewise.
Explicitly mention the 3 formats that --check supports.
Fixes http://bugs.gnu.org/19725
|
|
* m4/jm-macros.m4 (coreutils_MACROS): Check for syncfs().
* man/sync.x: Add references to syncfs, fsync and fdatasync.
* doc/coreutils.texi (sync invocation): Document the new feature.
* src/sync.c: Include "quote.h".
(AUTHORS): Include myself.
(MODE_FILE, MODE_DATA, MODE_FILE_SYSTEM, MODE_SYNC): New enum values.
(long_options): Define.
(sync_arg): New function.
(usage): Describe that arguments are now accepted.
(main): Add arguments parsing and add support for fsync(2),
fdatasync(2) and syncfs(2).
* tests/misc/sync.sh: New (and only) test for sync.
* tests/local.mk: Reference the new test.
* AUTHORS: Add myself to sync's authors.
* NEWS: Mention the new feature.
|
|
* src/stty.c (usage): Don't reference unsupported options,
in the combined options descriptions.
* doc/coreutils.texi (stty invocation): Adjust for the
new order of the 'sane' and 'raw' combined options.
Also add -iutf8 to the 'sane' list.
|
|
* src/stty.c (usage): On systems that support this setting (BSD),
display 'status' in the list of adjustable special characters.
* doc/coreutils.texi (stty invocation): Mention the option, and that
it's not currently supported on Linux.
|
|
The equivalent of this is 'flush', but that was never documented
as an option (though was output with stty -a). Therefore use
the more descriptive name, also generally used on BSD systems.
Note even though this setting seems ineffective on Linux, supporting
the setting is useful to allow terminal programs to receive
the default ^O character code.
* doc/coreutils.texi (stty invocation): Document the 'discard' option.
* src/stty.c (struct control_info): Add 'discard'; same as 'flush'.
(display_all): Show 'discard' rather than 'flush' char.
(display_changed): Likewise.
(usage): Document the 'discard' option.
|
|
Add support for the "extproc" option which is well described at:
http://lists.gnu.org/archive/html/bug-readline/2011-01/msg00004.html
* src/stty.c (usage): Describe the extproc option if either the
Linux EXTPROC local option is defined, or the equivalent
BSD TIOCEXT ioctl is defined.
(main): Make the separate ioctl call for extproc on BSD.
* doc/coreutils.texi (stty invocation): Describe the option,
and reference the related RFC 1116.
* NEWS: Mention the new feature.
|
|
* src/split.c (eolchar): A new variable to hold
the separator character (unibyte for now).
This is reference throughout rather than hardcoding '\n'.
(usage): Describe the new --separator option, and
mention records along with lines so there is no ambiguity
that all options treat lines and records equivalently.
(main): Have -t update eolchar, or default to '\n'.
* tests/split/record-sep.sh: New test case.
* tests/local.mk: Reference the new test.
* doc/coreutils.texi (split invocation): Document the new option.
Adjust --lines, --line-bytes, --number=[lr]/... to mention
they pertain to records if --separator is specified.
* NEWS: Mention the new feature.
|
|
Following on from http://bugs.gnu.org/17546
make it more obvious that du may elide specified operands
to avoid double counting in the set.
* src/du.c (usage): Specify that du operates on the set of
operands, rather than each independently.
* doc/coreutils.texi (du invocation): Likewise. Also state
that the number of entries printed may change due to the
order specified. Currently, deeper items specified earlier
will result in them being displayed, but don't mention that
implementation detail in the documentation.
* THANKS.in: Add reporter.
Reported by Stephen Shirley
|
|
Problem reported by Daiki Ueno in: http://bugs.gnu.org/19520
* src/shuf.c (main): Avoid core dump if !input_range.
* tests/misc/shuf.sh: Test for this bug.
|
|
* src/split.c (usage): Indent the info on CHUNKS so that
help2man can match it and align appropriately in its own section.
Fixes http://bugs.gnu.org/19228
|
|
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
|
|
Included in this are gnulib changes 3ea43e02 2768ceb7
which make the device IDs from /proc/self/mountinfo
available to df. This can be leveraged by a subsequent
change to df to present a more accurate list of file systems.
* bootstrap: Merge from gnulib.
* src/ls.c (dev_ino_pop): s/obstack_blank/obstack_blank_fast/
as this API/ABI has changed, giving memory exhausted errors
if negative (large positive) numbers are passed to obstack_blank().
* tests/df/skip-duplicates.sh: Adjust as the new gnulib code
requires a non NULL mnt_opts even when mnt_type is not "none".
|
|
Following on from commit v8.23-82-gaddae94, consistently diagnose
numbers that are too large, so as to distinguish from other errors,
and make the limits obvious.
* gl/modules/xdectoint: A new module implementing xdecto[iu]max(),
which handles the common case of parsing a bounded integer and
exiting with a diagnostic on error.
* gl/lib/xdectoimax.c: The signed variant.
* gl/lib/xdectoint.c: The parameterized implementation.
* gl/lib/xdectoint.h: The interface.
* gl/lib/xdectoumax.c: The unsigned variant.
* bootstrap.conf: Reference the new module.
* cfg.mk (exclude_file_name_regexp--sc_require_config_h_first):
Exclude the parameterized templates.
* src/csplit.c: Output EOVERFLOW or ERANGE errors if appropriate.
* src/fmt.c: Likewise.
* src/fold.c: Likewise.
* src/head.c: Likewise.
* src/ls.c: Likewise.
* src/nl.c: Likewise.
* src/nproc.c: Likewise.
* src/shred.c: Likewise.
* src/shuf.c: Likewise.
* src/stdbuf.c: Likewise.
* src/stty.c: Likewise.
* src/tail.c: Likewise.
* src/truncate.c: Likewise.
* src/split.c: Likewise.
* src/pr.c: Likewise.
* tests/pr/pr-tests.pl: Adjust to avoid matching errno diagnostic.
* tests/fmt/base.pl: Likewise.
* tests/split/l-chunk.sh: Likewise.
* tests/misc/shred-negative.sh: Likewise.
* tests/misc/tail.pl: Likewise. Also remove the redundant
existing ERR_SUBST from test err-6.
* tests/ls/hex-option.sh: Check HEX/OCT options.
* tests/misc/shred-size.sh: Likewise.
* tests/misc/stty-row-col.sh: Likewise.
|
|
* src/system.h: Add a missing __OS2__ ifdef guard.
Also adjust spacing around () to avoid a syntax-check failure.
|
