| Age | Commit message (Collapse) | Author |
|---|
|
* src/ls.c (color_indicator[C_END]): Comment with the correct
sequence, which was used since commit v6.10-61-g483297d
Fixes http://bugs.gnu.org/19992
|
|
Note that IBRIX used to have a different magic number 0x013111A7
instead of the current 0x013111A8. However, the former is no longer
used and the version of IBRIX it was used in is really ancient, so
it's extremely unlikely anyone is still using it. Therefore, just
add the newer magic number.
Mark IBRIX as a 'remote' file system type as inotify support had
never been officially tested with it.
* src/stat.c (human_fstype): Add file system ID definition.
* NEWS: Mention the improvement.
Fixes http://bugs.gnu.org/19951
|
|
tee is very often used with pipes and this gives better control
when writing to them. There are 3 classes of file descriptors
that tee can write to: files(1), pipes(2), and early close pipes(3).
Handling write errors to 1 & 2 is supported at present with the caveat
that failure writing to any pipe will terminate tee immediately.
Handling write errors to type 3 is not currently supported.
To improve the supported combinations we add these options:
--write-error=warn
Warn if error writing any output including pipes.
Allows continued writing to still open files/pipes.
Exit status is failure if any output had error.
--write-error=warn-nopipe, -p
Warn if error writing any output except pipes.
Allows continued writing to still open files/pipes.
Exit status is failure if any non pipe output had error.
--write-error=exit
Exit if error writing any output including pipes.
--write-error=exit-nopipe
Exit if error writing any output except pipes.
Use the "nopipe" variants when files are of types 1 and 3, otherwise
use the standard variants with types 1 and 2. A caveat with the above
scheme is that a combination of pipe types (2 & 3) is not supported
robustly. I.e. if you use the "nopipe" variants when using both type
2 and 3 pipes, then any "real" errors on type 2 pipes will not be
diagnosed.
Note also a general issue with type 3 pipes that are not on tee's
stdout, is that shell constructs don't allow to distinguish early
close from real failures. For example `tee >(head -n1) | grep -m1 ..`
can't distinguish between an error or an early close in "head" pipe,
while the fail on the grep part of the pipe is distinguished
independently from the resulting pipe errors. This is a general
issue with the >() construct, rather than with tee itself.
* NEWS: Mention the new feature.
* doc/coreutils.texi (tee invocation): Describe the new option.
* src/tee.c (usage): Likewise.
(main): With --write-error ignore SIGPIPE, and handle
the various exit, diagnostics combinations.
* tests/misc/tee.sh: Tess all the new options.
Fixes http://bugs.gnu.org/11540
|
|
This is a cleanup to the previous commit v8.23-138-g7ceaf1d.
* src/tee.c (tee_files): Do not exempt the "-" file from being closed,
as this is no longer stdout but a normal file.
|
|
Since v5.2.1-1247-g8dafbe5, tee(1) treated '-' as stdout while POSIX
explicitly requires to treat this as a file name. Revert this change,
as the interleaved output - due to sending another copy of input to
stdout - is not considered to be useful. Discussed in
http://lists.gnu.org/archive/html/coreutils/2015-02/msg00085.html
* src/tee.c (tee_files): Remove the special handling for "-" operands.
(usage): Remove the corresponding sentence.
* doc/coreutils.texi (common options): Remove the "tee -" example.
(tee invocation): Document that tee(1) now treats "-" as a file name.
* tests/misc/tee.sh: Add a test case for "tee -".
While at it, re-indent the above multi-argument processing case and
extend that to 13 operands, as POSIX mandates that, too.
* tests/misc/tee-dash.sh: Remove now-obsolete test.
* tests/local.mk (all_tests): Remove the above test.
* NEWS (Changes in behavior): Mention the change.
|
|
* src/tee.c (main): Don't continue reading if we can't
output anywhere.
* tests/misc/tee.sh: Ensure we exit when no more outputs.
* NEWS: Mention the change in behavior.
|
|
* cfg.mk (sc_prohibit_strncmp): Improve the search pattern: use
_sc_search_regexp to find all invocations of strncmp except when
used on a macro definition line; just match the function name with
an opening parenthesis. Before, the expression missed places where
the comparison against 0 was in a subsequent line.
* src/system.h (STRNCMP_LIT): Shorten 'literal' to 'lit' to move
the whole definition of the macro into one line - thus making
sc_prohibit_strncmp pass.
(STRPREFIX): Add space before parenthesis.
* src/du.c (main): Prefer STREQ_LEN over strncmp.
* src/pinky.c (scan_entries): Likewise.
* src/tac.c (tac_seekable): Likewise.
* src/who.c (scan_entries): Likewise.
|
|
This setting is unusual on BSD as it's read normally in the local
flags returned by tcgetattr(), but can only be set with an ioctl.
Setting with tcsetattr() is ignored.
* src/stty.c (NO_SETATTR): A new flag to indicate the setting
is read and displayed like a normal termios flag, but is set
in some other manner.
(main): Skip tcsetattr() for this setting when this flag is set.
Also fixup the exiting 'extproc' processing to handle the
'-extproc' case correctly.
(sane_mode): Skip setting '-extproc' for 'sane' to avoid the error.
This isn't ideal but matches the operation of the BSD native stty.
|
|
* src/ls.c (align_nstrftime): Be defensive and validate the tm_mon
index before using to access the abmon array. This was _not_ seen
to be an issue any system. See https://bugzilla.redhat.com/1190454
|
|
* src/tail.c (main): Document another caveat with the
inotify implementation wrt multiple hardlinked files.
|
|
Each user has a maximum number of inotify watches,
so handle the cases where we exhaust these resources.
* src/tail.c (tail_forever_inotify): Ensure we inotify_rm_watch()
the watch for an inode, when replacing with a new watch for a name.
Return all used inotify resources when reverting to polling.
Revert to polling upon first indication of inotify resource exhaustion.
Revert to polling on any inotify resource exhaustion.
Diagnose resource exhaustion correctly in all cases.
Avoid redundant reinsertion in the hash for unchanged watches
(where only attributes of the file are changed).
* tests/tail-2/retry.sh: Avoid false failure when reverting to polling.
* tests/tail-2/inotify-rotate.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
* tests/tail-2/inotify-rotate-resources.sh: New test to check
that we're calling inotify_rm_watch() for replaced files.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
* THANKS.in: Thanks for reporting and problem identification.
|
|
The -fsanitize=address run associated with v8.22-75-gf940fec
failed to check make-prime-list, as src/primes.h is not
regenerated with `make clean`. Running with -fsanitize=address
indicates a read 1 byte beyond the allocated buffer.
$ rm src/make-prime-list.o
$ make AM_CFLAGS=-fsanitize=address src/make-prime-list
$ src/make-prime-list 5000
=================================================================
==13913==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x61e00000fa43 at pc 0x4016f5 bp 0x7fff9d9840e0 sp 0x7fff9d9840d0
READ of size 1 at 0x61e00000fa43 thread T0
#0 0x4016f4 in main src/make-prime-list.c:214
#1 0x7f98892c5fdf in __libc_start_main (/lib64/libc.so.6+0x1ffdf)
#2 0x401774 (src/make-prime-list+0x401774)
0x61e00000fa43 is located 0 bytes to the right of 2499-byte
region [0x61e00000f080,0x61e00000fa43) allocated by thread T0 here:
#0 0x7f98896ba7b7 in malloc (/lib64/libasan.so.1+0x577b7)
#1 0x400f3f in xalloc src/make-prime-list.c:163
#2 0x400f3f in main src/make-prime-list.c:198
SUMMARY: AddressSanitizer: heap-buffer-overflow
src/make-prime-list.c:214 main
Shadow bytes around the buggy address:
0x0c3c7fff9ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c3c7fff9f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c3c7fff9f40: 00 00 00 00 00 00 00 00[03]fa fa fa fa fa fa fa
0x0c3c7fff9f50: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f60: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f70: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c3c7fff9f90: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
...
==13913==ABORTING
* src/make-prime-list.c (main): Bounds check the incremented index,
before using to access the buffer.
Fixes http://bugs.gnu.org/19784
|
|
* src/dircolors.hin: Remove deprecated anx, axa, axv. Add opus.
Suggested by Scott Teal.
|
|
To align with all other places (and correct grammar), change all
upper-case "I.E." to "I.e.". Furthermore, ensure that "i.e." is
followed by a comma. Finally, ensure to use a double-space before
"I.e.," at the beginning of a sentence.
The following was used to change all offending uses (apart from
old ChangeLog files):
$ git grep -liF 'i.e.' \
| xargs sed -i \
-e 's/I\.E\./I.e./g' \
-e 's/\. \(I\.e\.\)/. \1/g' \
-e 's/\([Ii]\.e\.\)\( \)/\1,\2/g' \
-e 's/\([Ii]\.e\.\)$/\1,/g'
* cfg.mk (sc_prohibit_uppercase_id_est): Add new rule.
(sc_ensure_double_space_after_dot_before_id_est): Likewise.
(sc_ensure_comma_after_id_est): Likewise.
(old_NEWS_hash): Refresh hash via "make update-NEWS-hash".
* NEWS: Change use of "id est" abbreviation via the above command.
* README: Likewise.
* README-prereq: Likewise.
* doc/coreutils.texi: Likewise.
* gl/lib/rand-isaac.c: Likewise.
* gl/lib/tempname.c.diff: Likewise.
* man/stdbuf.x: Likewise.
* src/cat.c: Likewise.
* src/copy.c: Likewise.
* src/copy.h: Likewise.
* src/cp.c: Likewise.
* src/cut.c: Likewise.
* src/dd.c: Likewise.
* src/df.c: Likewise.
* src/fiemap.h: Likewise.
* src/longlong.h: Likewise.
* src/ls.c: Likewise.
* src/numfmt.c: Likewise.
* src/pr.c: Likewise.
* src/shred.c: Likewise.
* src/shuf.c: Likewise.
* src/split.c: Likewise.
* tests/Coreutils.pm: Likewise.
* tests/df/df-symlink.sh: Likewise.
* tests/df/skip-rootfs.sh: Likewise.
* tests/init.sh: Likewise.
* tests/ls/color-norm.sh: Likewise.
* tests/misc/basename.pl: Likewise.
* tests/misc/ls-misc.pl: Likewise.
* tests/misc/md5sum-bsd.sh: Likewise.
* tests/misc/shred-exact.sh: Likewise.
* tests/misc/sort.pl: Likewise.
* tests/misc/stdbuf.sh: Likewise.
* tests/misc/tac-continue.sh: Likewise.
* tests/rm/r-root.sh: Likewise.
* tests/tail-2/symlink.sh: Likewise.
|
|
* src/md5sum.c (usage): Detail the reasons for the default
double space between checksum and file name.
* doc/coreutils.texi (md5sum invocation): Likewise.
Explicitly mention the 3 formats that --check supports.
Fixes http://bugs.gnu.org/19725
|
|
* m4/jm-macros.m4 (coreutils_MACROS): Check for syncfs().
* man/sync.x: Add references to syncfs, fsync and fdatasync.
* doc/coreutils.texi (sync invocation): Document the new feature.
* src/sync.c: Include "quote.h".
(AUTHORS): Include myself.
(MODE_FILE, MODE_DATA, MODE_FILE_SYSTEM, MODE_SYNC): New enum values.
(long_options): Define.
(sync_arg): New function.
(usage): Describe that arguments are now accepted.
(main): Add arguments parsing and add support for fsync(2),
fdatasync(2) and syncfs(2).
* tests/misc/sync.sh: New (and only) test for sync.
* tests/local.mk: Reference the new test.
* AUTHORS: Add myself to sync's authors.
* NEWS: Mention the new feature.
|
|
* src/stty.c (usage): Don't reference unsupported options,
in the combined options descriptions.
* doc/coreutils.texi (stty invocation): Adjust for the
new order of the 'sane' and 'raw' combined options.
Also add -iutf8 to the 'sane' list.
|
|
* src/stty.c (usage): On systems that support this setting (BSD),
display 'status' in the list of adjustable special characters.
* doc/coreutils.texi (stty invocation): Mention the option, and that
it's not currently supported on Linux.
|
|
The equivalent of this is 'flush', but that was never documented
as an option (though was output with stty -a). Therefore use
the more descriptive name, also generally used on BSD systems.
Note even though this setting seems ineffective on Linux, supporting
the setting is useful to allow terminal programs to receive
the default ^O character code.
* doc/coreutils.texi (stty invocation): Document the 'discard' option.
* src/stty.c (struct control_info): Add 'discard'; same as 'flush'.
(display_all): Show 'discard' rather than 'flush' char.
(display_changed): Likewise.
(usage): Document the 'discard' option.
|
|
Add support for the "extproc" option which is well described at:
http://lists.gnu.org/archive/html/bug-readline/2011-01/msg00004.html
* src/stty.c (usage): Describe the extproc option if either the
Linux EXTPROC local option is defined, or the equivalent
BSD TIOCEXT ioctl is defined.
(main): Make the separate ioctl call for extproc on BSD.
* doc/coreutils.texi (stty invocation): Describe the option,
and reference the related RFC 1116.
* NEWS: Mention the new feature.
|
|
* src/split.c (eolchar): A new variable to hold
the separator character (unibyte for now).
This is reference throughout rather than hardcoding '\n'.
(usage): Describe the new --separator option, and
mention records along with lines so there is no ambiguity
that all options treat lines and records equivalently.
(main): Have -t update eolchar, or default to '\n'.
* tests/split/record-sep.sh: New test case.
* tests/local.mk: Reference the new test.
* doc/coreutils.texi (split invocation): Document the new option.
Adjust --lines, --line-bytes, --number=[lr]/... to mention
they pertain to records if --separator is specified.
* NEWS: Mention the new feature.
|
|
Following on from http://bugs.gnu.org/17546
make it more obvious that du may elide specified operands
to avoid double counting in the set.
* src/du.c (usage): Specify that du operates on the set of
operands, rather than each independently.
* doc/coreutils.texi (du invocation): Likewise. Also state
that the number of entries printed may change due to the
order specified. Currently, deeper items specified earlier
will result in them being displayed, but don't mention that
implementation detail in the documentation.
* THANKS.in: Add reporter.
Reported by Stephen Shirley
|
|
Problem reported by Daiki Ueno in: http://bugs.gnu.org/19520
* src/shuf.c (main): Avoid core dump if !input_range.
* tests/misc/shuf.sh: Test for this bug.
|
|
* src/split.c (usage): Indent the info on CHUNKS so that
help2man can match it and align appropriately in its own section.
Fixes http://bugs.gnu.org/19228
|
|
Run "make update-copyright" and then...
* tests/sample-test: Adjust to use the single most recent year.
* tests/du/bind-mount-dir-cycle-v2.sh: Fix case in copyright message,
so that year is updated automatically in future.
|
|
Included in this are gnulib changes 3ea43e02 2768ceb7
which make the device IDs from /proc/self/mountinfo
available to df. This can be leveraged by a subsequent
change to df to present a more accurate list of file systems.
* bootstrap: Merge from gnulib.
* src/ls.c (dev_ino_pop): s/obstack_blank/obstack_blank_fast/
as this API/ABI has changed, giving memory exhausted errors
if negative (large positive) numbers are passed to obstack_blank().
* tests/df/skip-duplicates.sh: Adjust as the new gnulib code
requires a non NULL mnt_opts even when mnt_type is not "none".
|
|
Following on from commit v8.23-82-gaddae94, consistently diagnose
numbers that are too large, so as to distinguish from other errors,
and make the limits obvious.
* gl/modules/xdectoint: A new module implementing xdecto[iu]max(),
which handles the common case of parsing a bounded integer and
exiting with a diagnostic on error.
* gl/lib/xdectoimax.c: The signed variant.
* gl/lib/xdectoint.c: The parameterized implementation.
* gl/lib/xdectoint.h: The interface.
* gl/lib/xdectoumax.c: The unsigned variant.
* bootstrap.conf: Reference the new module.
* cfg.mk (exclude_file_name_regexp--sc_require_config_h_first):
Exclude the parameterized templates.
* src/csplit.c: Output EOVERFLOW or ERANGE errors if appropriate.
* src/fmt.c: Likewise.
* src/fold.c: Likewise.
* src/head.c: Likewise.
* src/ls.c: Likewise.
* src/nl.c: Likewise.
* src/nproc.c: Likewise.
* src/shred.c: Likewise.
* src/shuf.c: Likewise.
* src/stdbuf.c: Likewise.
* src/stty.c: Likewise.
* src/tail.c: Likewise.
* src/truncate.c: Likewise.
* src/split.c: Likewise.
* src/pr.c: Likewise.
* tests/pr/pr-tests.pl: Adjust to avoid matching errno diagnostic.
* tests/fmt/base.pl: Likewise.
* tests/split/l-chunk.sh: Likewise.
* tests/misc/shred-negative.sh: Likewise.
* tests/misc/tail.pl: Likewise. Also remove the redundant
existing ERR_SUBST from test err-6.
* tests/ls/hex-option.sh: Check HEX/OCT options.
* tests/misc/shred-size.sh: Likewise.
* tests/misc/stty-row-col.sh: Likewise.
|
|
* src/system.h: Add a missing __OS2__ ifdef guard.
Also adjust spacing around () to avoid a syntax-check failure.
|
|
OS/2 traditional shells(cmd) do not expand a response file(@file)
or a wildcard. Expand them in each utility itself.
* src/system.h (initialize_main): Define on OS/2. Expand a response
file and a wildcard.
|
|
Reported by Bernhard Voelker in:
http://lists.gnu.org/archive/html/bug-gnulib/2014-12/msg00191.html
* src/dd.c (scanargs): s/IN/OUT/.
|
|
Reported by Isabella Parakiss in:
http://lists.gnu.org/archive/html/bug-gnulib/2014-12/msg00184.html
* src/dd.c (parse_integer): Return strtol_error code, not bool.
All callers changed.
(scanargs): Improve quality of diagnostic when a number is too large.
|
|
Prompted by the implicit -O3 added by american-fuzzy-lop,
seen with GCC 4.9.2 on x86_64.
src/pr.c: In function 'print_files.part.5':
src/pr.c:1781:6: error: assuming signed overflow does not occur
when simplifying conditional to constant [-Werror=strict-overflow]
if (cols_ready_to_print () == 0)
This happens because cols_ready_to_print() is inlined
thus reducing the comparison to the N variable in print_page().
Now this can't overflow due to the protection when parsing the
specified column, but use an unsigned type to avoid the
apparent signed overflow.
* src/pr.c (cols_ready_to_print): Increment an unsigned type to
avoid the subsequent signed overflow warning.
|
|
This patch fixes the handling of sub-bind-mount cycles which are
incorrectly detected as the file system errors. If you bind mount the
directory 'a' to its subdirectory 'a/b/c' and then run 'du a/b' you
will get the circular dependency warning even though nothing is wrong
with the file system. This happens because the first directory that is
traversed twice in this case is not a bind mount but a child of bind
mount. The solution is to traverse all the directories in the cycle
that fts detected and check whether they are not a (bind) mount.
* src/du.c (mount_point_in_fts_cycle): New function that checks whether
any of the directories in the cycle that fts detected is a mount point.
* src/du.c (process_file): Update the function to use the new function
that looks up all the directories in the fts cycle instead of only the
last one.
* tests/du/bind-mount-dir-cycle-v2.sh: New test case that exhibits the
described behavior.
* tests/local.mk: Reference the new root test.
* NEWS: Mention the bug fix.
|
|
* src/dd.c (alloc_[io]buf): I committed a stale patch that omitted
the casts needed on 32 bit.
Identified by http://hydra.nixos.org/build/17610188
|
|
"zu" was output on solaris 8 for example rather than the number,
since coreutils-8.22.
* cfg.mk: Disallow %z, since we don't currently use the gnulib
fprintf module, so any usage with it is non portable. Also
our usage with error() currently works only through an ancillary
dependency on the vfprintf gnulib module.
* src/rm.c (main): Use %PRIuMAX rather than %zu for portability.
* src/dd.c (alloc_[io]buf): Likewise for consistency.
* src/od.c (main): Likewise.
* src/split.c (set_suffix_length): Likewise.
* NEWS: Mention the rm bug fix.
Reported in http://bugs.gnu.org/19184
|
|
Reported by Ted Carr in: http://bugs.gnu.org/19184
* src/local.mk (src/coreutils.h):
Don't assume single_binary_progs is nonempty.
|
|
If '\n' was present at the size_t boundary of a file,
then that and subsequent data would be discarded.
* src/paste.c (paste_parallel): Avoid the overflow issue
by changing the flag to a boolean rather than a count.
* NEWS: Mention the bug fix.
|
|
* src/df.c (filter_mount_list): Separate remote locations are
generally explicitly mounted, so list each even if they share
the same remote device and thus storage. However with --total
keep the suppression to give a more accurate value for the
total storage available.
(usage): Expand on the new implications of --total and move
it in the options list according to alphabetic order.
doc/coreutils.texi (df invocation): Mention that --total impacts
on deduplication of remote file systems and also move location
according to alphabetic order.
* tests/df/skip-duplicates.sh: Add remote test cases.
* NEWS: Mention the change in behavior.
Reported in http://bugs.debian.org/737399
Reported in http://bugzilla.redhat.com/920806
Reported in http://bugzilla.opensuse.org/866010
Reported in http://bugzilla.opensuse.org/901905
|
|
commit v8.22-125-g9d736f8 printed placeholder "-" values
for device names that didn't match the preferred device name
for a particular mount point. However that was seen to erroneously
suppress values for aliased host names or exports, common with
remote file systems.
* src/df.c (me_for_dev): Rename from devname_for_dev() so that
we can determine the remoteness as well as the name for the
preferred mount entry.
(get_dev): Don't output place holder values when both
current and preferred mount entries are remote.
Reported in http://bugs.debian.org/737399
|
|
* NEWS: Update the recent entry to also mention the avoidance
of incorrectly unlinking a multi-hardlinked "source" file when
presented with source and dest that only differ in case.
* src/copy.c (same_file_ok): Mention the case issue with same_name().
* tests/mv/hardlink-case.sh: Test the issue on HFS+.
* tests/local.mk: Reference the new test case.
* tests/mv/vfat: Remove an old related but unused test case.
|
|
* src/ls.c (usage): Mention the -b and -q options
in the -1 description.
* doc/coreutils.texi (ls invocation): Likewise.
|
|
We may run into a race condition if we treat hard links to the same file
as distinct files. If we do 'mv a b' and 'mv b a' in parallel, both a
and b can disappear from the file system. The reason is that in this
case the unlink on src is called and the system calls can end up being
run in the order where unlink(a) and unlink(b) are the last two system
calls. Therefore exit with an error code so that we avoid the potential
data loss.
* src/copy.c (same_file_ok): Don't set unlink_src that was used by mv,
and return false for two hardlinks to a file in move_mode.
*src/copy.c (copy_internal): No longer honor the unlink_src option,
used only by mv.
NEWS: Mention the change in behavior.
* tests/cp/same-file.sh: Augment to cover the `cp -a hlsl1 sl1` case.
* tests/mv/hard-verbose.sh: Remove no longer needed test.
* tests/local.mk: Remove the reference to hard-verbose.sh.
* tests/mv/hard-4.sh: Adjust so we fail in this case.
* tests/mv/i-4.sh: Likewise.
* tests/mv/symlink-onto-hardlink-to-self.sh: Likewise.
|
|
* src/df.c (usage): Mention that duplicate file systems are shown
with this option, not just dummy file systems.
* doc/coreutils.texi (df invocation): For the --all option, expand
on the class of normally suppressed mount entries that it includes.
Reported in http://bugs.debian.org/737399
|
|
* src/chroot.c (is_root): Adjust to compare canonicalized paths
rather than inodes, to handle (return false in) the case where
we have a tree that is constructed by first bind mounting "/"
(thus having the same inode).
(main): Unconditionally call chroot() because it's safer
and of minimal performance benefit to avoid in this case.
This will cause inconsistency with some platforms
not allowing `chroot / true` for non root users.
* tests/misc/chroot-fail.sh: Adjust appropriately.
* NEWS: Mention the bug fixes.
Fixes http://bugs.gnu.org/18736
|
|
* src/copy.c (copy_reg): If sparse_copy() failed, then an
erroneous error about failing to extend the file would be reported.
|
|
* src.copy.c (copy_reg): Use fiemap to read sparse files, even
if the output is not to a regular file.
* NEWS: Mention the improvement.
|
|
With --sparse=always use fallocate(...PUNCH_HOLE...) to
avoid any permanent allocation due to speculative
preallocation employed by file systems such as XFS.
* m4/jm-macros.m4: Check for <linux/falloc.h> and fallocate().
* src/copy.c (punch_hole): A new function to try and punch
a hole at the specified offset if supported.
(create_hole): Call punch_hole() after requesting a hole.
(extent_copy): Likewise.
* NEWS: Mention the improvement.
|
|
Previously cp would not detect runs of NULs that were
smaller than the buffer size used for I/O (currently 128KiB).
* src/copy.c (copy_reg): Use an independent hole_size, set to
st_blksize, to increase the chances of detecting a representable hole,
in a run of NULs read from the input.
(create_hole): A new function refactored from sparse_copy() and
extent_copy() so we have a single place to handle holes.
(sparse_copy): Adjust to loop over the larger input buffer
in chunks of the passed hole size. Also adjust to only call
lseek once per hole, rather than at least once per input buffer.
* tests/cp/sparse.sh: Add test cases for various sparse chunk sizes.
* NEWS: Mention the improvement.
|
|
Prompted by http://hydra.nixos.org/build/15682577
with GCC 4.8.3 on i686
src/tac.c:557:6: error: assuming signed overflow does not occur
when simplifying conditional to constant [-Werror=strict-overflow]
if (bytes_copied < 0)
This happens because copy_to_temp() is inlined in tac_nonseekable(),
thus reducing the comparison to the bytes_copied variable in
copy_to_temp. Now this can't overflow on either 32 or 64 bit
due to the protection of the preceding fwrite(). We could use a
guard like "if (bytes_copied <= OFF_T_MAX - bytes_read)" to avoid
the warning, but rather than a runtime branch, just use an unsigned
type to avoid apparent signed overflow on systems where the accumulation
is not promoted to unsigned (32 bit size_t, 64 bit off_t).
* src/tac.c (copy_to_temp): Increment an unsigned type to
avoid the subsequent signed overflow warning.
|
|
Fix similar problems in head, od, split, tac, and tail.
Reported by George Shuklin in: http://bugs.gnu.org/18621
* NEWS: Document this.
* src/head.c (elseek): Move up.
(elide_tail_bytes_pipe, elide_tail_lines_pipe): New arg
CURRENT_POS. All uses changed.
(elide_tail_bytes_file, elide_tail_lines_file):
New arg ST and remove arg SIZE. All uses changed.
* src/head.c (elide_tail_bytes_file):
* src/od.c (skip): Avoid optimization for /sys files, where
st_size is bogus and st_size == st_blksize.
Don't report error at EOF when not optimizing.
* src/head.c, src/od.c, src/tail.c: Include "stat-size.h".
* src/split.c (input_file_size): New function.
(bytes_split, lines_chunk_split, bytes_chunk_extract): New arg
INITIAL_READ. All uses changed. Use it to double-check st_size.
* src/tac.c (tac_seekable): New arg FILE_POS. All uses changed.
(copy_to_temp): Return size of temp file. All uses changed.
* src/tac.c (tac_seekable):
* src/tail.c (tail_bytes):
* src/wc.c (wc):
Don't trust st_size; double-check by reading.
* src/wc.c (wc): New arg CURRENT_POS. All uses changed.
* tests/local.mk (all_tests): Add tests/misc/wc-proc.sh,
tests/misc/od-j.sh, tests/tail-2/tail-c.sh.
* tests/misc/head-c.sh:
* tests/misc/tac-2-nonseekable.sh:
* tests/split/b-chunk.sh:
Add tests for problems with /proc and /sys files.
* tests/misc/od-j.sh, tests/misc/wc-proc.sh, tests/tail-2/tail-c.sh:
New files.
|
