summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-05dd: warn when we disable oflag=direct not at EOFPádraig Brady
An alternative to this is to auto enable iflag=fullblock when oflag=direct and bs= is specified. It was thought better though, to warn about the specific issue, and give full control of dd's options to the user. * src/dd.c (iwrite): Warn, when we write after having disabled O_DIRECT. See https://bugzilla.redhat.com/show_bug.cgi?id=614605
2011-03-03du: don't infloop for --files0-from=DIRJim Meyering
* src/du.c (main): Fail on AI_ERR_READ error, rather than merely diagnosing and continuing. Based on a patch by Stefan Vargyas. Also move the handling of AI_ERR_EOF into the case stmt. Do not report ferror/fclose(stdin) failure when we've already diagnosed e.g., failure to read the DIR, above. Bug introduced by 2008-11-24 commit 031e2fb5, "du: read and process --files0-from= input a name at a time,". * src/wc.c: Handle read failure as with du: do not exit immediately, but rather go on to print any total and to clean-up. As above, move the handling of AI_ERR_EOF into the case stmt. * tests/du/files0-from-dir: New file, to test both du and wc. * tests/Makefile.am (TESTS): Add it. * NEWS (Bug fixes): Mention it.
2011-03-03wc: avoid NULL dereference on out-of-memory errorJim Meyering
* src/wc.c (main): Diagnose failed argv_iter_init_* failure, rather than falling through and dereferencing NULL. Bug introduced by 2008-11-25 commit c2e56e0d, "wc: read and process --files0-from= input a name at a time,". * NEWS (Bug fixes): Mention it.
2011-02-25tests: without filefrag, only skip part of sparse-fiemapPádraig Brady
* tests/cp/sparse-fiemap: Move the PERL check to the top, since we don't test anything without it. In the loop, don't use skip_test_ as it exits the test completely.
2011-02-19maint: replace spaces with tab in tests/Makefile.amGilles Espinasse
* tests/Makefile.am: Replace spaces with tabs for consistency
2011-02-18stdbuf: avoid even the appearance of a possible use-after-freeJim Meyering
There was an execution path by which "libstdbuf" could be used after being freed, but that would happen only if there were no libstdbuf.so alongside the stdbuf program and there had been an installation error leading to absence of the file, PKGLIBDIR/libstdbuf.so. * src/stdbuf.c (set_LD_PRELOAD): Rearrange loop to make it perfectly clear that there is no possibility of use-after-free. Steve Grubb reported this possible use-after-free of "libstdbuf".
2011-02-18tests: correct racy sparse-to-pipe testGilles Espinasse
* tests/cp/sparse-to-pipe: Wait for backgrounded "cat" to complete before comparing the results.
2011-02-14uptime: omit unnecessary #ifPaul Eggert
* src/uptime.c (print_uptime): Omit unnecessary "#if defined HAVE_GETLOADAVG || defined C_GETLOADAVG". This #if is always true, and removing it will help us simplify the gnulib getloadavg module.
2011-02-15tests: support more file systems in the cp fiemap testsPádraig Brady
* tests/cp/sparse-fiemap: Check for fiemap support against a file rather than a directory to enable tests on BTRFS for example. Explicity disable the test on ext3 or file systems where we can't determine the type. * tests/cp/fiemap-perf: Likewise. Also disable the test on older BTRFS (like in Fedora 14), where extents are returned for holes. * tests/init.cfg: Comment that BTRFS only supports fiemap for regular files.
2011-02-11copy: adjust fiemap handling of sparse filesPádraig Brady
Don't depend on heuristics to detect sparse files if fiemap is available. Also don't scan for new holes unless --sparse=always has been specified. * src/copy.c (extent_copy): Pass the user specified sparse mode, and handle as described above.
2011-02-11copy: suppress redundant lseeks when using fiemapPádraig Brady
* src/copy.c (extent_copy): Suppress redundant lseek()s in both the source and dest files, when there is no hole between extents.
2011-02-10tests: fix bug in preceding check.mk changeJim Meyering
* tests/check.mk (.built-programs): Run cd'd submake in a subshell so the redirected output ends up in the current directory, not ../src.
2011-02-10tests: print "python missing:..." diagnostic where more will see itJim Meyering
* tests/init.cfg (fiemap_capable_): Print with warn_, so that the diagnostic shows up alongside the corresponding SKIP message.
2011-02-10tests: avoid gross inefficiency in "make test"Jim Meyering
Do not run a sub-make to set up the environment for each and every test script. Instead, run it just once and store the result in a file. * tests/check.mk (built_programs): Remove definition. (.built-programs): New rule to create the temporary file. (CLEANFILES): Arrange to remove it. (TESTS_ENVIRONMENT): Simply cat .built-programs, rather than running the sub-make. * .gitignore: Ignore it.
2011-02-08test: improve the cp fiemap testsPádraig Brady
* tests/cp/fiemap-2: Enable the fiemap check for files, which will enable the test for files on ext3. * tests/cp/fiemap-perf: Comment why we're not enabling for ext3. * tests/cp/sparse-fiemap: Ditto. Also sync the files before doing a fiemap which was needed for ext4 loop back at least. Add a comment that FIEMAP_FLAG_SYNC is ineffective, thus requiring the explicit syncs. * tests/fiemap-capable: A new python script to determine if a specified path supports fiemap. * tests/init.cfg (fiemap_capable_): Use the new python script. * tests/Makefile.am (EXTRA_DIST): Include the new python script.
2011-02-08tests: randread-tests: use macro.h not "#define ASSERT..."Jim Meyering
* gl/modules/randread-tests (Files): Add tests/macros.h * gl/tests/test-rand-isaac.c: Remove now-unneeded #include directives. (ASSERT): Remove definition. Instead, include "macros.h". Prompted by suggestions from Bruno Haible.
2011-02-07maint: move di-set and ino-map modules from ./gl to gnulibJim Meyering
* gl/lib/di-set.c: Remove file. * gl/lib/di-set.h: Likewise. * gl/lib/ino-map.c: Likewise. * gl/lib/ino-map.h: Likewise. * gl/modules/di-set: Likewise. * gl/modules/di-set-tests: Likewise. * gl/modules/ino-map: Likewise. * gl/modules/ino-map-tests: Likewise. * gl/tests/test-di-set.c: Likewise. * gl/tests/test-ino-map.c: Likewise. * gnulib: Update to latest, now that these two modules are there.
2011-02-07di-set: provide a lookup methodJim Meyering
This is required for patch, and hence is about to move to gnulib. * gl/lib/di-set.c (di_set_lookup): New function. * gl/lib/di-set.h: Declare it. * gl/tests/test-di-set.c (main): Exercise it. The bug was introduced on 2004-12-04 via commit 7380cf79.
2011-02-07cut: don't segfault for large unbounded rangeJim Meyering
* src/cut.c (set_fields): When computing the maximum range endpoint, take into consideration the start of any unbounded range, like "999-". * NEWS (Bug fixes): Mention it. * tests/misc/cut (big-unbounded-b,c,f): Add tests. Reported by Paul Marinescu in http://debbugs.gnu.org/7993 The bug was introduced on 2004-12-04 via commit 7380cf79.
2011-02-05copy: don't let a failed lseek go undiagnosedJim Meyering
Upon failed lseek, sparse_copy_finalize would mistakenly return true. Admittedly, that is very unlikely, since that particular lseek is attempted only if the preceding call to sparse_copy induced a hole at EOF (via lseek on the destination FD). However, now that sparse_copy has an output parameter, N_READ, there is no longer any reason to call lseek (fd, 0, SEEK_CUR), so... * src/copy.c (sparse_copy_finalize): Remove the function. (copy_reg): Call ftruncate with n_read, rather than sparse_copy_finalize with its now-unnecessary lseek. Lasse Collin spotted the bug in sparse_copy_finalize.
2011-02-04post-release administriviaJim Meyering
* NEWS: Add header line for next release. * .prev-version: Record previous version. * cfg.mk (old_NEWS_hash): Auto-update.
2011-02-04version 8.10Jim Meyering
* NEWS: Record release date.
2011-02-04cp: avoid spurious failure on any non-linux kernelJim Meyering
* src/extent-scan.c (extent_scan_read) [!linux]: Always set scan->initial_scan_failed so caller knows not to report the failure.
2011-02-04tests: skip mv/i-3 on FreeBSD to avoid spurious failureJim Meyering
* tests/mv/i-3: Skip when uname -s reports FreeBSD.
2011-02-03sort: fix --debug key highlighting when key start after key endPádraig Brady
This case was overlooked in commit bdde34f9, 2010-08-05, "sort: tune and refactor --debug code, and fix minor underlining bug" * src/sort.c (debug_key): Don't adjust the key end when it's before the key start. * tests/misc/sort-debug-keys: Add a test case.
2011-02-02tests: correct part of fiemap-perfJim Meyering
* tests/cp/fiemap-perf: Correct erroneous added test. Since nonexistent names were used, the final test ended up being "test =", which would always "succeed".
2011-02-02build: update gnulib submodule to latestJim Meyering
2011-01-31cp: fix the buffer size used when writing zerosPádraig Brady
* src/copy.c (write_zeros): This bug caused 4 or 8 bytes to be written at a time which is very inefficient. One could trigger the issue with `cp --sparse=never sparse non-sparse` on a file system that supports fiemap.
2011-01-31cp: always initialize extent_copy's output parameterJim Meyering
* src/copy.c (extent_copy): Otherwise it would be used uninitialized.
2011-01-31tests: exercise a rarely-used corner of copy.cJim Meyering
* tests/cp/sparse-to-pipe: New test. * tests/Makefile.am (TESTS): Add it.
2011-01-31cp: fix copying a sparse file to a pipeJim Meyering
The recent FIEMAP-related changes made it so the unusual case of copying a sparse file to a non-regular destination (e.g., a pipe) would erroneously write one byte too many to that destination. That happened because extent_copy assumed that it could use lseek to obtain the number of bytes written to the output file descriptor. That was valid only for regular files. * src/copy.c (sparse_copy): Add a parameter, to be used by extent_copy, but not by reg_copy. Adjust callers. (extent_copy): Maintain new local, dest_pos, using new arg, n_read. Don't call lseek on dest_fd; use new var, dest_pos, instead. (copy_reg): Add unused arg.
2011-01-31tests: gfs2 also supports FIEMAPJim Meyering
* tests/init.cfg (fiemap_capable_): Add gfs2. Clarify comment.
2011-01-31maint: remove unused inclusion of "fiemap.h"Jim Meyering
* src/copy.c: Don't include "fiemap.h".
2011-01-31tests: factor fiemap-related predicate into init.cfgJim Meyering
* tests/init.cfg (fiemap_capable_): New function. * tests/cp/fiemap-perf: Use it. * tests/cp/sparse-fiemap: Likewise. * tests/cp/fiemap-2: Likewise.
2011-01-31maint: update copyright year lists in new filesJim Meyering
* src/extent-scan.h: Update copyright year list. * src/extent-scan.c: Likewise. * tests/cp/sparse-fiemap: Likewise.
2011-01-31tests: modernize sparse-fiemap testJim Meyering
* tests/cp/sparse-fiemap: Use print_ver_, not open-coded VERBOSE test.
2011-01-31tests: remove duplicate fiemap-perf testJim Meyering
* tests/cp/fiemap-perf: Copy block-comparing code from sparse-fiemap. * tests/cp/sparse-fiemap: The same test was here, alongside a much more involved test. Remove it, now that it is in its own file.
2011-01-30doc: NEWS: mention cp's improvementJim Meyering
* NEWS (New Features): cp now copies sparse files efficiently.
2011-01-30build: update gnulib submodule to latestJim Meyering
2011-01-30copy, tee: assume EINTR is always defined: remove #ifdefsJim Meyering
Don't use "#ifdef EINTR". dd.c has been doing that since 2004. * src/copy.c (sparse_copy): Remove #ifdef...#endif around EINTR use. * src/tee.c (tee_files): Remove #ifdef...#endif around EINTR use. If we need it, add something like this in system.h: /* When EINTR is not defined, define it to an improbable value so that each use does not have to be #ifdef'd. */ #ifndef EINTR # define EINTR 999988 #endif
2011-01-30tests: cp/fiemap: exercise previously-failing partsJim Meyering
* tests/cp/fiemap-2: New test. * tests/Makefile.am (TESTS): Add it.
2011-01-30copy: make extent_copy use sparse_copy, rather than its own codeJim Meyering
* src/copy.c (extent_copy): Before this change, extent_copy would fail to create holes, thus breaking --sparse=auto and --sparse=always. I.e., copying a large enough file of all zeros, cp --sparse=always should introduce a hole, but with extent_copy, it would not.
2011-01-30copy: remove obsolete commentJim Meyering
* src/copy.c (sparse_copy): Remove now-obsolete comment about how we used to work around lack of ftruncate. Combine nested if conditions into one.
2011-01-30copy: factor sparse-copying code into its own function, becauseJim Meyering
we're going to have to use it from within extent_copy, too. * src/copy.c (sparse_copy): New function, factored out of... (copy_reg): ...here. Remove now-unused locals.
2011-01-30fiemap copy: avoid leak-on-errorJim Meyering
* src/copy.c (extent_copy): Don't leak an extent_scan buffer on failed lseek, read, or write.
2011-01-30fiemap copy: avoid a performance hit due to very small bufferJim Meyering
* src/copy.c (extent_copy): Don't let what should have been a temporary reduction of buf_size (to handle a short ext_len) become permanent and thus impact the performance of all further iterations.
2011-01-30fiemap copy: simplify post-loop logic; improve commentsJim Meyering
* src/copy.c (extent_copy): Avoid duplication in post-loop extend-to-desired-length code.
2011-01-30fiemap copy: rename some localsJim Meyering
(extent_copy): Rename locals: s/*ext_logical/*ext_start/
2011-01-30tests: ensure that FIEMAP-enabled cp copies a sparse file efficientlyJim Meyering
* tests/cp/fiemap-perf: New file. * tests/Makefile.am (TESTS): Add it.
2011-01-30copy: don't allocate a separate buffer just for extent-based copyJim Meyering
* src/copy.c (copy_reg): Move use of extent_scan to just *after* we allocate the main copying buffer, so we can... (extent_scan): Take a new parameter, BUF, and use that rather than allocating a private buffer. Update caller.
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-10-12 02:18:00 +0000