diff options
Diffstat (limited to 'tests')
155 files changed, 371 insertions, 371 deletions
diff --git a/tests/Coreutils.pm b/tests/Coreutils.pm index 81937c403..7f4a0372c 100644 --- a/tests/Coreutils.pm +++ b/tests/Coreutils.pm @@ -48,7 +48,7 @@ defined $ENV{DJDIR} # {filename => 'contents'} filename and contents # {filename => undef} filename only -- $(srcdir)/filename must exist # -# FIXME: If there is more than one input file, then you can't specify `REDIR'. +# FIXME: If there is more than one input file, then you can't specify 'REDIR'. # PIPE is still ok. # # I/O spec: a hash ref with the following properties @@ -60,9 +60,9 @@ defined $ENV{DJDIR} # {OUT => {'filename'=>undef}} compare contents of existing filename to # stdout from cmd # {OUT => {'filename'=>[$CTOR, $DTOR]}} $CTOR and $DTOR are references to -# functions, each which is passed the single argument `filename'. +# functions, each which is passed the single argument 'filename'. # $CTOR must create `filename'. -# DTOR may be omitted in which case `sub{unlink @_[0]}' is used. +# DTOR may be omitted in which case 'sub{unlink @_[0]}' is used. # FIXME: implement this # {ERR => ...} # Same as for OUT, but compare with stderr, not stdout. @@ -213,10 +213,10 @@ sub getlimits() } # FIXME: cleanup on interrupt -# FIXME: extract `do_1_test' function +# FIXME: extract 'do_1_test' function # FIXME: having to include $program_name here is an expedient kludge. -# Library code doesn't `die'. +# Library code doesn't 'die'. sub run_tests ($$$$$) { my ($program_name, $prog, $t_spec, $save_temps, $verbose) = @_; diff --git a/tests/Makefile.am b/tests/Makefile.am index 894fcf8a2..8b670fc40 100644 --- a/tests/Makefile.am +++ b/tests/Makefile.am @@ -53,7 +53,7 @@ check-root: check-recursive: root-hint -# Advertise `check-root' target. +# Advertise 'check-root' target. .PHONY: root-hint root-hint: @echo '***********************************************************' diff --git a/tests/chgrp/basic b/tests/chgrp/basic index 4279d65a2..0cf0bca84 100755 --- a/tests/chgrp/basic +++ b/tests/chgrp/basic @@ -66,7 +66,7 @@ chown --from=:$g1 :$g2 f; test `stat --printf=%g f` = $g2 || fail=1 # This *should* change the group of f. # Though note that the diagnostic is misleading in that -# it says the `group of `symlink'' has been changed. +# it says the 'group of `symlink'' has been changed. chgrp $g1 symlink; test `stat --printf=%g f` = $g1 || fail=1 chown --from=:$g1 :$g2 f; test `stat --printf=%g f` = $g2 || fail=1 diff --git a/tests/chgrp/deref b/tests/chgrp/deref index ab5db8d74..cf1ddd869 100755 --- a/tests/chgrp/deref +++ b/tests/chgrp/deref @@ -52,7 +52,7 @@ set _ `ls -ln f`; g=$5; test "$g" = $g2 || fail=1 # This *should* change the group of f. # Though note that the diagnostic you'd get with -c is misleading in that -# it says the `group of `symlink'' has been changed. +# it says the 'group of `symlink'' has been changed. chgrp --dereference $g1 symlink set _ `ls -ln f`; g=$5; test "$g" = $g1 || fail=1 set _ `ls -ln symlink`; g=$5; test "$g" = $g2 || fail=1 diff --git a/tests/chgrp/no-x b/tests/chgrp/no-x index 200fa3221..c6688c623 100755 --- a/tests/chgrp/no-x +++ b/tests/chgrp/no-x @@ -37,9 +37,9 @@ prog=chgrp # NOTE: this code is the same for all tests/*/no-x tests. # Depending on whether fts is using native fdopendir, we see one # of the following diagnostics (note also the /y suffix in one case): -# prog: `d/no-x': Permission denied -# prog: cannot access `d/no-x/y': Permission denied -# prog: cannot read directory `d/no-x': Permission denied +# prog: 'd/no-x': Permission denied +# prog: cannot access 'd/no-x/y': Permission denied +# prog: cannot read directory 'd/no-x': Permission denied # Convert either of the latter two to the first one. sed "s/^$prog: cannot access /$prog: /" out > t && mv t out sed "s/^$prog: cannot read directory /$prog: /" out > t && mv t out diff --git a/tests/chgrp/posix-H b/tests/chgrp/posix-H index b2723b68a..a6474f562 100755 --- a/tests/chgrp/posix-H +++ b/tests/chgrp/posix-H @@ -43,7 +43,7 @@ changed=' 3 ' for i in $changed; do - # Filter out symlinks (entries that end in `s'), since it's not + # Filter out symlinks (entries that end in 's'), since it's not # possible to change their group/owner information on some systems. case $i in *s) continue;; esac set _ `ls -dgn $i`; shift @@ -59,7 +59,7 @@ not_changed=' 3/3F ' for i in $not_changed; do - # Filter out symlinks (entries that end in `s'), since it's not + # Filter out symlinks (entries that end in 's'), since it's not # possible to change their group/owner information on some systems. case $i in *s) continue;; esac set _ `ls -dgn $i`; shift diff --git a/tests/chmod/no-x b/tests/chmod/no-x index 3a68eeaa9..cc0d14268 100755 --- a/tests/chmod/no-x +++ b/tests/chmod/no-x @@ -32,9 +32,9 @@ prog=chmod # NOTE: this code is the same for all tests/*/no-x tests. # Depending on whether fts is using native fdopendir, we see one # of the following diagnostics (note also the /y suffix in one case): -# prog: `d/no-x': Permission denied -# prog: cannot access `d/no-x/y': Permission denied -# prog: cannot read directory `d/no-x': Permission denied +# prog: 'd/no-x': Permission denied +# prog: cannot access 'd/no-x/y': Permission denied +# prog: cannot read directory 'd/no-x': Permission denied # Convert either of the latter two to the first one. sed "s/^$prog: cannot access /$prog: /" out > t && mv t out sed "s/^$prog: cannot read directory /$prog: /" out > t && mv t out @@ -47,7 +47,7 @@ EOF compare exp out || fail=1 cd a -# This will fail with ``chmod: fts_read failed: Permission denied'' +# This will fail with '`chmod: fts_read failed: Permission denied'' chmod a-x . b 2> /dev/null && fail=1 # chmod must exit with status 1. # Due to a bug in coreutils-5.93's fts.c, chmod would provoke diff --git a/tests/chmod/octal b/tests/chmod/octal index 3e6c02a61..845116b26 100755 --- a/tests/chmod/octal +++ b/tests/chmod/octal @@ -21,7 +21,7 @@ print_ver_ chmod # Before coreutils-5.92, this would mistakenly succeed, -# and act like `chmod 0 .'. +# and act like 'chmod 0 .'. chmod 0-followed-by-anything . 2> /dev/null && fail=1 chmod 7-followed-by-anything . 2> /dev/null && fail=1 chmod 8 . 2> /dev/null && fail=1 diff --git a/tests/chown/deref b/tests/chown/deref index 2d1992c34..aeaf8ee76 100755 --- a/tests/chown/deref +++ b/tests/chown/deref @@ -30,7 +30,7 @@ chown --dereference $user dangle 2> out1 && fail=1 sed 's/: [^:]*$//' out1 > out cat <<\EOF > exp || fail=1 -chown: cannot dereference `dangle' +chown: cannot dereference 'dangle' EOF compare exp out || fail=1 diff --git a/tests/chown/preserve-root b/tests/chown/preserve-root index 69d92d4aa..a9145b7ab 100755 --- a/tests/chown/preserve-root +++ b/tests/chown/preserve-root @@ -47,17 +47,17 @@ chown -RLh --preserve-root `id -u` d >> out 2>&1 && fail=1 chgrp -RLh --preserve-root `id -g` d >> out 2>&1 && fail=1 cat <<\EOF > exp || fail=1 -chown: it is dangerous to operate recursively on `/' +chown: it is dangerous to operate recursively on '/' chown: use --no-preserve-root to override this failsafe -chgrp: it is dangerous to operate recursively on `/' +chgrp: it is dangerous to operate recursively on '/' chgrp: use --no-preserve-root to override this failsafe -chmod: it is dangerous to operate recursively on `/' +chmod: it is dangerous to operate recursively on '/' chmod: use --no-preserve-root to override this failsafe ==== test -RHh ==== test -RLh -chown: it is dangerous to operate recursively on `d/slink-to-root' (same as `/') +chown: it is dangerous to operate recursively on 'd/slink-to-root' (same as '/') chown: use --no-preserve-root to override this failsafe -chgrp: it is dangerous to operate recursively on `d/slink-to-root' (same as `/') +chgrp: it is dangerous to operate recursively on 'd/slink-to-root' (same as '/') chgrp: use --no-preserve-root to override this failsafe EOF diff --git a/tests/cp/backup-is-src b/tests/cp/backup-is-src index fc8dbf3c4..9fa7ec6e2 100755 --- a/tests/cp/backup-is-src +++ b/tests/cp/backup-is-src @@ -28,7 +28,7 @@ cp --b=simple a~ a > out 2>&1 && fail=1 sed "s,cp:,XXX:," out > out2 cat > exp <<\EOF -XXX: backing up `a' would destroy source; `a~' not copied +XXX: backing up 'a' would destroy source; 'a~' not copied EOF compare exp out2 || fail=1 diff --git a/tests/cp/cp-a-selinux b/tests/cp/cp-a-selinux index be8465645..11758170d 100755 --- a/tests/cp/cp-a-selinux +++ b/tests/cp/cp-a-selinux @@ -83,7 +83,7 @@ grep "Operation not supported" err && fail=1 # to the file type. # Note: this test could also be run by a regular (non-root) user in an # NFS mounted directory. When doing that, I get this diagnostic: -# cp: failed to set the security context of `g' to `system_u:object_r:nfs_t': \ +# cp: failed to set the security context of 'g' to 'system_u:object_r:nfs_t': \ # Operation not supported cat <<\EOF > exp || framework_failure_ cp: failed to set the security context of diff --git a/tests/cp/cp-deref b/tests/cp/cp-deref index 290ee4092..08a1485f9 100755 --- a/tests/cp/cp-deref +++ b/tests/cp/cp-deref @@ -26,7 +26,7 @@ ln -s ../c b || framework_failure_ # Before coreutils-5.94, the following would fail with this message: -# cp: will not create hard link `d/b/c' to directory `d/a/c' +# cp: will not create hard link 'd/b/c' to directory 'd/a/c' cp -RL a b d || fail=1 test -d a/c || fail=1 test -d b/c || fail=1 diff --git a/tests/cp/cp-mv-backup b/tests/cp/cp-mv-backup index 5a122294e..66cc74bf1 100755 --- a/tests/cp/cp-mv-backup +++ b/tests/cp/cp-mv-backup @@ -22,7 +22,7 @@ print_ver_ cp umask 022 # Be careful to close $actual before removing the containing directory. -# Use `1>&2' rather than `1<&-' since the latter appears not to work +# Use '1>&2' rather than '1<&-' since the latter appears not to work # with /bin/sh from powerpc-ibm-aix4.2.0.0. actual=actual diff --git a/tests/cp/cp-mv-enotsup-xattr b/tests/cp/cp-mv-enotsup-xattr index d9b373ff2..76ede2e3e 100755 --- a/tests/cp/cp-mv-enotsup-xattr +++ b/tests/cp/cp-mv-enotsup-xattr @@ -89,7 +89,7 @@ rm -f err noxattr/a cp -a --preserve=xattr xattr/a noxattr/ 2>err && fail=1 if grep '^#define USE_XATTR 1' $CONFIG_HEADER > /dev/null; then cat <<\EOF > exp -cp: setting attributes for `noxattr/a': Operation not supported +cp: setting attributes for 'noxattr/a': Operation not supported EOF else cat <<\EOF > exp diff --git a/tests/cp/fail-perm b/tests/cp/fail-perm index c7c89942f..2b6133cd0 100755 --- a/tests/cp/fail-perm +++ b/tests/cp/fail-perm @@ -29,7 +29,7 @@ chmod u=rx,go=,-st D || framework_failure_ # This is expected to exit non-zero, because it can't read D/a. cp -pR D DD > /dev/null 2>&1 && fail=1 -# Permissions on DD must be `dr-x------' +# Permissions on DD must be 'dr-x------' mode=`ls -ld DD|cut -b-10` test "$mode" = dr-x------ || fail=1 @@ -38,7 +38,7 @@ chmod 0 D ln -s D/D symlink touch F cat > exp <<\EOF -cp: accessing `symlink': Permission denied +cp: accessing 'symlink': Permission denied EOF cp F symlink 2> out && fail=1 diff --git a/tests/cp/fiemap-empty b/tests/cp/fiemap-empty index 878831d2e..951d8e062 100755 --- a/tests/cp/fiemap-empty +++ b/tests/cp/fiemap-empty @@ -48,7 +48,7 @@ fallocate -l 600MiB space.test || # Disable this test on old BTRFS (e.g. Fedora 14) # which reports ordinary extents for unwritten ones. -filefrag space.test || skip_ 'the `filefrag` utility is missing' +filefrag space.test || skip_ 'the 'filefrag` utility is missing' filefrag -v space.test | grep -F 'unwritten' > /dev/null || skip_ 'this file system does not report empty extents as "unwritten"' diff --git a/tests/cp/fiemap-perf b/tests/cp/fiemap-perf index 33bb818d2..3addfe1b2 100755 --- a/tests/cp/fiemap-perf +++ b/tests/cp/fiemap-perf @@ -34,7 +34,7 @@ timeout 10 truncate -s1T f || framework_failure_ # Disable this test on old BTRFS (e.g. Fedora 14) # which reports (unwritten) extents for holes. -filefrag f || skip_ 'the `filefrag` utility is missing' +filefrag f || skip_ 'the 'filefrag` utility is missing' filefrag f | grep -F ': 0 extents found' > /dev/null || skip_ 'this file system reports extents for holes' diff --git a/tests/cp/into-self b/tests/cp/into-self index 792e659f8..67cec7f95 100755 --- a/tests/cp/into-self +++ b/tests/cp/into-self @@ -16,10 +16,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -# In 4.0.35 and earlier, `mkdir dir && cp -R dir dir' would produce this: -# cp: won't create hard link `dir/dir/dir' to directory `' +# In 4.0.35 and earlier, 'mkdir dir && cp -R dir dir' would produce this: +# cp: won't create hard link 'dir/dir/dir' to directory '' # Now it gives this: -# cp: can't copy a directory `dir' into itself `dir/dir' +# cp: can't copy a directory 'dir' into itself 'dir/dir' . "${srcdir=.}/init.sh"; path_prepend_ ../src print_ver_ cp @@ -41,13 +41,13 @@ cp -rl a dir dir 2>> out && fail=1 echo 4 >> out cat > exp <<\EOF -cp: cannot copy a directory, `dir', into itself, `dir/dir' +cp: cannot copy a directory, 'dir', into itself, 'dir/dir' 1 -cp: cannot copy a directory, `dir', into itself, `dir/dir' +cp: cannot copy a directory, 'dir', into itself, 'dir/dir' 2 -cp: cannot copy a directory, `dir', into itself, `dir/dir' +cp: cannot copy a directory, 'dir', into itself, 'dir/dir' 3 -cp: cannot copy a directory, `dir', into itself, `dir/dir' +cp: cannot copy a directory, 'dir', into itself, 'dir/dir' 4 EOF #' diff --git a/tests/cp/link-preserve b/tests/cp/link-preserve index 5b84f3ca8..243cf3721 100755 --- a/tests/cp/link-preserve +++ b/tests/cp/link-preserve @@ -1,5 +1,5 @@ #!/bin/sh -# ensure that `cp -d' preserves hard-links between command line arguments +# ensure that 'cp -d' preserves hard-links between command line arguments # ensure that --preserve=links works with -RH and -RL # Copyright (C) 2001-2002, 2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/cp/no-deref-link1 b/tests/cp/no-deref-link1 index 100bf3c17..677c284cf 100755 --- a/tests/cp/no-deref-link1 +++ b/tests/cp/no-deref-link1 @@ -29,7 +29,7 @@ cd .. # It should fail with a message something like this: -# ./cp: `a/foo' and `b/foo' are the same file +# ./cp: 'a/foo' and 'b/foo' are the same file cp -d a/foo b 2>/dev/null # Fail this test if the exit status is not 1 diff --git a/tests/cp/no-deref-link2 b/tests/cp/no-deref-link2 index df2c70fc1..33fc43187 100755 --- a/tests/cp/no-deref-link2 +++ b/tests/cp/no-deref-link2 @@ -29,7 +29,7 @@ cd .. # It should fail with a message something like this: -# cp: `a' and `b/foo' are the same file +# cp: 'a' and 'b/foo' are the same file cp -d a b 2>/dev/null # Fail this test if the exit status is not 1 diff --git a/tests/cp/no-deref-link3 b/tests/cp/no-deref-link3 index 052be6dd1..6ea56349d 100755 --- a/tests/cp/no-deref-link3 +++ b/tests/cp/no-deref-link3 @@ -26,7 +26,7 @@ ln -s a b # It should fail with a message something like this: -# cp: `a' and `b' are the same file +# cp: 'a' and 'b' are the same file cp -d a b 2>/dev/null # Fail this test if the exit status is not 1 diff --git a/tests/cp/perm b/tests/cp/perm index 2dd3ae571..7a03400b0 100755 --- a/tests/cp/perm +++ b/tests/cp/perm @@ -24,7 +24,7 @@ very_expensive_ umask 037 -# Now, try it with `mv', with combinations of --force, no-f and +# Now, try it with 'mv', with combinations of --force, no-f and # existing-destination and not. for u in 31 37 2; do echo umask: $u diff --git a/tests/cp/r-vs-symlink b/tests/cp/r-vs-symlink index 13c58f64f..36bf3a5c3 100755 --- a/tests/cp/r-vs-symlink +++ b/tests/cp/r-vs-symlink @@ -18,7 +18,7 @@ # Restored old behavior (whereby cp -r preserves symlinks) in 4.1.6, # though now such usage evokes a warning: -# cp: `slink': WARNING: using -r to copy symbolic links is not portable +# cp: 'slink': WARNING: using -r to copy symbolic links is not portable . "${srcdir=.}/init.sh"; path_prepend_ ../src print_ver_ cp diff --git a/tests/cp/same-file b/tests/cp/same-file index dad7068ff..440f342e3 100755 --- a/tests/cp/same-file +++ b/tests/cp/same-file @@ -20,7 +20,7 @@ . "${srcdir=.}/init.sh"; path_prepend_ ../src print_ver_ cp -# Unset CDPATH. Otherwise, output from the `cd dir' command +# Unset CDPATH. Otherwise, output from the 'cd dir' command # can make this test fail. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH @@ -128,16 +128,16 @@ for args in 'foo symlink' 'symlink foo' 'foo foo' 'sl1 sl2' 'foo hardlink'; do done cat <<\EOF | sed "$remove_these_sed" > expected -1 [cp: `foo' and `symlink' are the same file] (foo symlink -> foo) -1 -d [cp: `foo' and `symlink' are the same file] (foo symlink -> foo) -1 -f [cp: `foo' and `symlink' are the same file] (foo symlink -> foo) -1 -df [cp: `foo' and `symlink' are the same file] (foo symlink -> foo) +1 [cp: 'foo' and 'symlink' are the same file] (foo symlink -> foo) +1 -d [cp: 'foo' and 'symlink' are the same file] (foo symlink -> foo) +1 -f [cp: 'foo' and 'symlink' are the same file] (foo symlink -> foo) +1 -df [cp: 'foo' and 'symlink' are the same file] (foo symlink -> foo) 0 --rem (foo symlink) 0 -b (foo symlink symlink.~1~ -> foo) 0 -bd (foo symlink symlink.~1~ -> foo) 0 -bf (foo symlink symlink.~1~ -> foo) 0 -bdf (foo symlink symlink.~1~ -> foo) -1 -l [cp: cannot create hard link `symlink' to `foo'] (foo symlink -> foo) +1 -l [cp: cannot create hard link 'symlink' to 'foo'] (foo symlink -> foo) 0 -dl (foo symlink -> foo) 0 -fl (foo symlink) 0 -dfl (foo symlink) @@ -146,14 +146,14 @@ cat <<\EOF | sed "$remove_these_sed" > expected 0 -bfl (foo symlink symlink.~1~ -> foo) 0 -bdfl (foo symlink symlink.~1~ -> foo) -1 [cp: `symlink' and `foo' are the same file] (foo symlink -> foo) -1 -d [cp: `symlink' and `foo' are the same file] (foo symlink -> foo) -1 -f [cp: `symlink' and `foo' are the same file] (foo symlink -> foo) -1 -df [cp: `symlink' and `foo' are the same file] (foo symlink -> foo) -1 --rem [cp: `symlink' and `foo' are the same file] (foo symlink -> foo) -1 -b [cp: `symlink' and `foo' are the same file] (foo symlink -> foo) +1 [cp: 'symlink' and 'foo' are the same file] (foo symlink -> foo) +1 -d [cp: 'symlink' and 'foo' are the same file] (foo symlink -> foo) +1 -f [cp: 'symlink' and 'foo' are the same file] (foo symlink -> foo) +1 -df [cp: 'symlink' and 'foo' are the same file] (foo symlink -> foo) +1 --rem [cp: 'symlink' and 'foo' are the same file] (foo symlink -> foo) +1 -b [cp: 'symlink' and 'foo' are the same file] (foo symlink -> foo) 0 -bd (foo -> foo foo.~1~ symlink -> foo) symlink-loop symlink-loop -1 -bf [cp: `symlink' and `foo' are the same file] (foo symlink -> foo) +1 -bf [cp: 'symlink' and 'foo' are the same file] (foo symlink -> foo) 0 -bdf (foo -> foo foo.~1~ symlink -> foo) symlink-loop symlink-loop 0 -l (foo symlink -> foo) 0 -dl (foo symlink -> foo) @@ -161,13 +161,13 @@ cat <<\EOF | sed "$remove_these_sed" > expected 0 -bl (foo symlink -> foo) 0 -bfl (foo symlink -> foo) -1 [cp: `foo' and `foo' are the same file] (foo) -1 -d [cp: `foo' and `foo' are the same file] (foo) -1 -f [cp: `foo' and `foo' are the same file] (foo) -1 -df [cp: `foo' and `foo' are the same file] (foo) -1 --rem [cp: `foo' and `foo' are the same file] (foo) -1 -b [cp: `foo' and `foo' are the same file] (foo) -1 -bd [cp: `foo' and `foo' are the same file] (foo) +1 [cp: 'foo' and 'foo' are the same file] (foo) +1 -d [cp: 'foo' and 'foo' are the same file] (foo) +1 -f [cp: 'foo' and 'foo' are the same file] (foo) +1 -df [cp: 'foo' and 'foo' are the same file] (foo) +1 --rem [cp: 'foo' and 'foo' are the same file] (foo) +1 -b [cp: 'foo' and 'foo' are the same file] (foo) +1 -bd [cp: 'foo' and 'foo' are the same file] (foo) 0 -bf (foo foo.~1~) 0 -bdf (foo foo.~1~) 0 -l (foo) @@ -179,24 +179,24 @@ cat <<\EOF | sed "$remove_these_sed" > expected 0 -bfl (foo foo.~1~) 0 -bdfl (foo foo.~1~) -1 [cp: `sl1' and `sl2' are the same file] (foo sl1 -> foo sl2 -> foo) +1 [cp: 'sl1' and 'sl2' are the same file] (foo sl1 -> foo sl2 -> foo) 0 -d (foo sl1 -> foo sl2 -> foo) -1 -f [cp: `sl1' and `sl2' are the same file] (foo sl1 -> foo sl2 -> foo) +1 -f [cp: 'sl1' and 'sl2' are the same file] (foo sl1 -> foo sl2 -> foo) 0 -df (foo sl1 -> foo sl2 -> foo) 0 --rem (foo sl1 -> foo sl2) 0 -b (foo sl1 -> foo sl2 sl2.~1~ -> foo) 0 -bd (foo sl1 -> foo sl2 -> foo sl2.~1~ -> foo) 0 -bf (foo sl1 -> foo sl2 sl2.~1~ -> foo) 0 -bdf (foo sl1 -> foo sl2 -> foo sl2.~1~ -> foo) -1 -l [cp: cannot create hard link `sl2' to `sl1'] (foo sl1 -> foo sl2 -> foo) +1 -l [cp: cannot create hard link 'sl2' to 'sl1'] (foo sl1 -> foo sl2 -> foo) 0 -fl (foo sl1 -> foo sl2 -> foo) 0 -bl (foo sl1 -> foo sl2 -> foo sl2.~1~ -> foo) 0 -bfl (foo sl1 -> foo sl2 -> foo sl2.~1~ -> foo) -1 [cp: `foo' and `hardlink' are the same file] (foo hardlink) -1 -d [cp: `foo' and `hardlink' are the same file] (foo hardlink) -1 -f [cp: `foo' and `hardlink' are the same file] (foo hardlink) -1 -df [cp: `foo' and `hardlink' are the same file] (foo hardlink) +1 [cp: 'foo' and 'hardlink' are the same file] (foo hardlink) +1 -d [cp: 'foo' and 'hardlink' are the same file] (foo hardlink) +1 -f [cp: 'foo' and 'hardlink' are the same file] (foo hardlink) +1 -df [cp: 'foo' and 'hardlink' are the same file] (foo hardlink) 0 --rem (foo hardlink) 0 -b (foo hardlink hardlink.~1~) 0 -bd (foo hardlink hardlink.~1~) diff --git a/tests/cp/slink-2-slink b/tests/cp/slink-2-slink index 10207db74..8542db1bd 100755 --- a/tests/cp/slink-2-slink +++ b/tests/cp/slink-2-slink @@ -1,5 +1,5 @@ #!/bin/sh -# `test cp --update A B' where A and B are both symlinks that point +# 'test cp --update A B' where A and B are both symlinks that point # to the same file # Copyright (C) 2000, 2002, 2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/cp/special-bits b/tests/cp/special-bits index c3de42612..362401156 100755 --- a/tests/cp/special-bits +++ b/tests/cp/special-bits @@ -1,5 +1,5 @@ #!/bin/sh -# make sure `cp -p' preserves special bits +# make sure 'cp -p' preserves special bits # This works only when run as root. # Copyright (C) 2000-2002, 2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/cp/symlink-slash b/tests/cp/symlink-slash index d90809574..eeaf97cdf 100755 --- a/tests/cp/symlink-slash +++ b/tests/cp/symlink-slash @@ -26,7 +26,7 @@ ln -s dir symlink || framework_failure_ cp -dR symlink/ s || fail=1 set `ls -l s` -# Prior to fileutils-4.0q, the following would have output ...`s -> dir' +# Prior to fileutils-4.0q, the following would have output ...'s -> dir' # because the trailing slash was removed unconditionally (now you have to # use the new --strip-trailing-slash option) causing cp to reproduce the # symlink. Now, the trailing slash is interpreted by the stat library diff --git a/tests/dd/misc b/tests/dd/misc index beeae8cb0..f388969a4 100755 --- a/tests/dd/misc +++ b/tests/dd/misc @@ -1,5 +1,5 @@ #!/bin/sh -# Ensure dd treats `--' properly. +# Ensure dd treats '--' properly. # Also test some flag values. # Copyright (C) 1999, 2004-2012 Free Software Foundation, Inc. diff --git a/tests/du/2g b/tests/du/2g index 88cf86742..a901ddbe9 100755 --- a/tests/du/2g +++ b/tests/du/2g @@ -21,15 +21,15 @@ . "${srcdir=.}/init.sh"; path_prepend_ ../src print_ver_ du -# Creating a 2GB file counts as `very expensive'. +# Creating a 2GB file counts as 'very expensive'. very_expensive_ # Get number of free kilobytes on current partition, so we can # skip this test if there is insufficient free space. -# This technique relies on the fact that the `Available' kilobyte -# count is the number just before the one with a trailing `%'. +# This technique relies on the fact that the 'Available' kilobyte +# count is the number just before the one with a trailing '%'. free_kb=`df -kP .|tail -1|sed 's/ [0-9][0-9]*%.*//;s/ *$//;s/.* //'` case "$free_kb" in [0-9]*) ;; diff --git a/tests/du/8gb b/tests/du/8gb index 3926a36ee..e8803783c 100755 --- a/tests/du/8gb +++ b/tests/du/8gb @@ -29,7 +29,7 @@ fi # FIXME: this should be a test of dd. # On some systems (at least linux-2.4.18 + NFS to disks on a Solaris system) -# the `dd' command above mistakenly creates a file of length `0', yet +# the 'dd' command above mistakenly creates a file of length '0', yet # doesn't fail. The root of that failure is that the ftruncate call # returns zero but doesn't do its job. Detect this failure. set x `ls -gG big` @@ -41,7 +41,7 @@ Consider rerunning this test on a different file system." fi -# This would print `0 big' with coreutils-4.5.8. +# This would print '0 big' with coreutils-4.5.8. du -ab big > out || fail=1 cat <<\EOF > exp diff --git a/tests/du/deref b/tests/du/deref index 3de6aa4a9..cfd84563b 100755 --- a/tests/du/deref +++ b/tests/du/deref @@ -30,7 +30,7 @@ ln -s nowhere dangle || framework_failure_ # This used to fail with the following diagnostic: -# du: `b': No such file or directory +# du: 'b': No such file or directory du -sD slink b > /dev/null 2>&1 || fail=1 # This used to fail to report the dangling symlink. diff --git a/tests/du/files0-from b/tests/du/files0-from index fb25c3f0f..c62c2a805 100755 --- a/tests/du/files0-from +++ b/tests/du/files0-from @@ -43,7 +43,7 @@ my @Tests = # input file name of '-' ['minus-in-stdin', '--files0-from=-', '<', {IN=>{f=>'-'}}, {EXIT=>1}, {ERR => "$prog: when reading file names from stdin, no file name of" - . " `-' allowed\n"}], + . " '-' allowed\n"}], # empty input, regular file ['empty', '--files0-from=@AUX@', {AUX=>''}], diff --git a/tests/du/inacc-dest b/tests/du/inacc-dest index 61e01d8a2..c9c709759 100755 --- a/tests/du/inacc-dest +++ b/tests/du/inacc-dest @@ -40,13 +40,13 @@ cat <<\EOF > exp || fail=1 ./c ./d ./e -du: cannot read directory `./c': Permission denied +du: cannot read directory './c': Permission denied EOF # Map a diagnostic like this -# du: cannot access `./c/j': Permission denied +# du: cannot access './c/j': Permission denied # to this: -# du: cannot access `./c': Permission denied +# du: cannot access './c': Permission denied # And accept "cannot read directory" in place of "cannot access" sed "s,/c/j': ,/c': ," out > t && mv t out sed 's,cannot access,cannot read directory,' out > t && mv t out diff --git a/tests/du/long-from-unreadable b/tests/du/long-from-unreadable index c661bc1c3..10864e00e 100755 --- a/tests/du/long-from-unreadable +++ b/tests/du/long-from-unreadable @@ -18,10 +18,10 @@ # Show that fts (hence du, chmod, chgrp, chown) fails when all of the # following are true: -# - `.' is not readable +# - '.' is not readable # - operating on a hierarchy containing a relative name longer than PATH_MAX # - run on a system where gnulib's openat emulation must resort to using -# save_cwd and restore_cwd (which fail if `.' is not readable). +# save_cwd and restore_cwd (which fail if '.' is not readable). # Thus, the following du invocation should succeed on newer Linux and # Solaris systems, yet it must fail on systems lacking both openat and # /proc support. However, before coreutils-6.0 this test would fail even diff --git a/tests/du/long-sloop b/tests/du/long-sloop index b5b11f256..78926d38f 100755 --- a/tests/du/long-sloop +++ b/tests/du/long-sloop @@ -47,9 +47,9 @@ echo foo > $i # If a system can handle this many symlinks in a file name, # just skip this test. -# The following also serves to record in `err' the string +# The following also serves to record in 'err' the string # corresponding to strerror (ELOOP). This is necessary because while -# Linux/libc gives `Too many levels of symbolic links', Solaris +# Linux/libc gives 'Too many levels of symbolic links', Solaris # renders it as `Number of symbolic links encountered during path # name traversal exceeds MAXSYMLINKS'. @@ -61,7 +61,7 @@ too_many=`sed 's/.*: //' err` # With coreutils-5.93 there was no failure. # With coreutils-5.94 we get the desired diagnostic: -# du: cannot access `1/s/s/s/.../s': Too many levels of symbolic links +# du: cannot access '1/s/s/s/.../s': Too many levels of symbolic links du -L 1 > /dev/null 2> out1 && fail=1 sed "s, .1/s/s/s/[/s]*',," out1 > out || fail=1 diff --git a/tests/du/no-x b/tests/du/no-x index 9ba70770d..53084e1ca 100755 --- a/tests/du/no-x +++ b/tests/du/no-x @@ -32,9 +32,9 @@ prog=du # NOTE: this code is the same for all tests/*/no-x tests. # Depending on whether fts is using native fdopendir, we see one # of the following diagnostics (note also the /y suffix in one case): -# prog: `d/no-x': Permission denied -# prog: cannot access `d/no-x/y': Permission denied -# prog: cannot read directory `d/no-x': Permission denied +# prog: 'd/no-x': Permission denied +# prog: cannot access 'd/no-x/y': Permission denied +# prog: cannot read directory 'd/no-x': Permission denied # Convert either of the latter two to the first one. sed "s/^$prog: cannot access /$prog: /" out > t && mv t out sed "s/^$prog: cannot read directory /$prog: /" out > t && mv t out diff --git a/tests/du/restore-wd b/tests/du/restore-wd index 03d87e858..eb9dc98ef 100755 --- a/tests/du/restore-wd +++ b/tests/du/restore-wd @@ -24,7 +24,7 @@ mkdir a b || framework_failure_ # With du from coreutils-4.5.5 and 4.5.6, this would fail with -# du: `b': No such file or directory +# du: 'b': No such file or directory du a b > out || fail=1 diff --git a/tests/du/slash b/tests/du/slash index 0dfc1096f..24fc20079 100755 --- a/tests/du/slash +++ b/tests/du/slash @@ -1,5 +1,5 @@ #!/bin/sh -# `du /' would omit the `/' on the last line. +# 'du /' would omit the '/' on the last line. # Copyright (C) 2003-2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/du/slink b/tests/du/slink index 99677f96c..1f8429171 100755 --- a/tests/du/slink +++ b/tests/du/slink @@ -19,14 +19,14 @@ . "${srcdir=.}/init.sh"; path_prepend_ ../src print_ver_ du -# Determine if `.' is on a local (would non-NFS be sufficient?) file system. +# Determine if '.' is on a local (would non-NFS be sufficient?) file system. # At least on OSF/1 4.0d, when using an nfsv3 file system, # each created symlink can end up having a size of 0. require_local_dir_ if df --type=xfs . >/dev/null 2>&1; then # At least on Irix-6.5.19, when using an xfs file system, - # each created symlink (name lengths up to 255) would have a size of `0'. + # each created symlink (name lengths up to 255) would have a size of '0'. skip_ "'.' is on an XFS file system" fi diff --git a/tests/du/two-args b/tests/du/two-args index 88d01339d..0d88c98ed 100755 --- a/tests/du/two-args +++ b/tests/du/two-args @@ -1,5 +1,5 @@ #!/bin/sh -# Make sure `du d/1 d/2' works. +# Make sure 'du d/1 d/2' works. # That command failed with du from fileutils-4.0q. # Copyright (C) 2000, 2004-2012 Free Software Foundation, Inc. diff --git a/tests/id/gnu-zero-uids b/tests/id/gnu-zero-uids index 858004c65..6ca8dc651 100755 --- a/tests/id/gnu-zero-uids +++ b/tests/id/gnu-zero-uids @@ -1,5 +1,5 @@ #!/bin/sh -# On GNU, `id' must fail for processes with zero UIDs. +# On GNU, 'id' must fail for processes with zero UIDs. # Copyright (C) 2011-2012 Free Software Foundation, Inc. @@ -23,7 +23,7 @@ require_gnu_ sush - true || skip_ "the 'sush' command does not work" -# Run `id' with zero UIDs. It should exit with a non-zero status. +# Run 'id' with zero UIDs. It should exit with a non-zero status. sush - id > out && fail=1 Exit $fail diff --git a/tests/init.cfg b/tests/init.cfg index 437969840..fda82bc02 100644 --- a/tests/init.cfg +++ b/tests/init.cfg @@ -153,7 +153,7 @@ require_setfacl_() || skip_ "setfacl does not work on the current file system" } -# Require a controlling input `terminal'. +# Require a controlling input 'terminal'. require_controlling_input_terminal_() { tty -s || have_input_tty=no @@ -231,7 +231,7 @@ rwx_to_mode_() # s xs # T t # t xt - # The `T' and `t' ones are only valid for `other'. + # The 'T' and 't' ones are only valid for 'other'. s='s/S/@/;s/s/x@/;s/@/s/' t='s/T/@/;s/t/x@/;s/@/t/' @@ -310,7 +310,7 @@ require_root_() skip_if_root_() { uid_is_privileged_ && skip_ "must be run as non-root"; } -# Set `groups' to a space-separated list of at least two groups +# Set 'groups' to a space-separated list of at least two groups # of which the user is a member. require_membership_in_two_groups_() { @@ -321,7 +321,7 @@ require_membership_in_two_groups_() *' '*) ;; *) skip_ 'requires membership in two groups this test requires that you be a member of more than one group, -but running `id -G'\'' either failed or found just one. If you really +but running 'id -G'\'' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., @@ -398,7 +398,7 @@ mkfifo_or_skip_() # Make an exception of this case -- usually we interpret framework-creation # failure as a test failure. However, in this case, when running on a SunOS # system using a disk NFS mounted from OpenBSD, the above fails like this: - # mkfifo: cannot make fifo `fifo-10558': Not owner + # mkfifo: cannot make fifo 'fifo-10558': Not owner skip_ 'unable to create a fifo' fi } diff --git a/tests/init.sh b/tests/init.sh index dca215131..6266a259f 100644 --- a/tests/init.sh +++ b/tests/init.sh @@ -61,7 +61,7 @@ ME_=`expr "./$0" : '.*/\(.*\)$'` # We use a trap below for cleanup. This requires us to go through # hoops to get the right exit status transported through the handler. -# So use `Exit STATUS' instead of `exit STATUS' inside of the tests. +# So use 'Exit STATUS' instead of 'exit STATUS' inside of the tests. # Turn off errexit here so that we don't trip the bug with OSF1/Tru64 # sh inside this function. Exit () { set +e; (exit $1); exit $1; } @@ -172,7 +172,7 @@ else if test "$re_shell_" = __current__; then # 'eval'ing this code makes Solaris 10's /bin/sh exit with # $? set to 2. It does not evaluate any of the code after the - # "unexpected" first `('. Thus, we must run it in a subshell. + # "unexpected" first '('. Thus, we must run it in a subshell. ( eval "$gl_shell_test_script_" ) > /dev/null 2>&1 else "$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null diff --git a/tests/install/basic-1 b/tests/install/basic-1 index 856590806..9f954eee4 100755 --- a/tests/install/basic-1 +++ b/tests/install/basic-1 @@ -83,7 +83,7 @@ chmod 755 sub # Ensure that the first argument-dir has been created. test -d xx/yy || fail=1 -# Make sure that the `rel' directory was not created... +# Make sure that the 'rel' directory was not created... test -d sub/rel && fail=1 # and make sure it was not created in the wrong place. test -d xx/rel && fail=1 @@ -105,11 +105,11 @@ fi touch file || fail=1 ginstall -Dv file sub3/a/b/c/file >out 2>&1 || fail=1 compare - out <<\EOF || fail=1 -ginstall: creating directory `sub3' -ginstall: creating directory `sub3/a' -ginstall: creating directory `sub3/a/b' -ginstall: creating directory `sub3/a/b/c' -`file' -> `sub3/a/b/c/file' +ginstall: creating directory 'sub3' +ginstall: creating directory 'sub3/a' +ginstall: creating directory 'sub3/a/b' +ginstall: creating directory 'sub3/a/b/c' +'file' -> 'sub3/a/b/c/file' EOF Exit $fail diff --git a/tests/install/create-leading b/tests/install/create-leading index 715fe2983..d349f601c 100755 --- a/tests/install/create-leading +++ b/tests/install/create-leading @@ -16,7 +16,7 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -# Note that the tests below use `ginstall', not install, because +# Note that the tests below use 'ginstall', not install, because # that's the name of the binary in ../../src. . "${srcdir=.}/init.sh"; path_prepend_ ../src diff --git a/tests/install/trap b/tests/install/trap index 446e39ad4..79cea5f7c 100755 --- a/tests/install/trap +++ b/tests/install/trap @@ -1,5 +1,5 @@ #!/bin/sh -# Ensure that `install -s' doesn't infloop when its parent +# Ensure that 'install -s' doesn't infloop when its parent # process traps CHLD signal. # Copyright (C) 2004-2012 Free Software Foundation, Inc. @@ -26,7 +26,7 @@ print_ver_ ginstall # ash doesn't support "trap '' CHLD"; it knows only signal numbers. sig=`"$abs_top_builddir/src/kill" -l CHLD 2>/dev/null` && trap '' $sig - # Before 2004-04-21, install would infloop, in the `while (wait...' loop: + # Before 2004-04-21, install would infloop, in the 'while (wait...' loop: exec ginstall -s "$abs_top_builddir/src/ginstall$EXEEXT" . ) diff --git a/tests/ln/hard-backup b/tests/ln/hard-backup index 65bf1f15a..bc38bbe5d 100755 --- a/tests/ln/hard-backup +++ b/tests/ln/hard-backup @@ -24,7 +24,7 @@ touch f || framework_failure_ ln --backup f f 2> out && fail=1 cat <<\EOF > exp || fail=1 -ln: `f' and `f' are the same file +ln: 'f' and 'f' are the same file EOF compare exp out || fail=1 diff --git a/tests/ln/hard-to-sym b/tests/ln/hard-to-sym index 5a3f1762c..3ea4570b1 100755 --- a/tests/ln/hard-to-sym +++ b/tests/ln/hard-to-sym @@ -53,7 +53,7 @@ esac ln -s /no-such-dir || framework_failure_ ln -L no-such-dir hard-to-dangle 2>err && fail=1 case `cat err` in - *' accessing `no-such-dir'\':*) ;; + *' accessing 'no-such-dir'\':*) ;; *) fail=1 ;; esac ln -P no-such-dir hard-to-dangle || fail=1 @@ -64,12 +64,12 @@ mkdir d || framework_failure_ ln -s d link-to-dir || framework_failure_ ln -L link-to-dir hard-to-dir-link 2>err && fail=1 case `cat err` in - *': `link-to-dir'\'': hard link not allowed for directory'*) ;; + *': 'link-to-dir'\'': hard link not allowed for directory'*) ;; *) fail=1 ;; esac ln -P link-to-dir/ hard-to-dir-link 2>err && fail=1 case `cat err` in - *': `link-to-dir/'\'': hard link not allowed for directory'*) ;; + *': 'link-to-dir/'\'': hard link not allowed for directory'*) ;; *) fail=1 ;; esac ln -P link-to-dir hard-to-dir-link || fail=1 diff --git a/tests/ln/target-1 b/tests/ln/target-1 index 72c46f203..87dfbf0cd 100755 --- a/tests/ln/target-1 +++ b/tests/ln/target-1 @@ -18,7 +18,7 @@ # Before coreutils-4.5.3, --target-dir didn't work with one file. # It would create the desired link, but would fail with a diagnosis like this: -# ln: `d/.': cannot overwrite directory +# ln: 'd/.': cannot overwrite directory # Based on a test case from Dmitry V. Levin. . "${srcdir=.}/init.sh"; path_prepend_ ../src diff --git a/tests/ls/follow-slink b/tests/ls/follow-slink index 8bfe04c07..7b5042c7c 100755 --- a/tests/ls/follow-slink +++ b/tests/ls/follow-slink @@ -26,7 +26,7 @@ ln -s link link || framework_failure_ ln -s ../../dir1 sub/link-to-dir || framework_failure_ # Make sure the symlink was created. -# `ln -s link link' succeeds, but creates no file on +# 'ln -s link link' succeeds, but creates no file on # systems running some DJGPP-2.03 libc. ls -F link > /dev/null || framework_failure_ diff --git a/tests/ls/no-arg b/tests/ls/no-arg index 8234a15de..26774072f 100755 --- a/tests/ls/no-arg +++ b/tests/ls/no-arg @@ -1,5 +1,5 @@ #!/bin/sh -# make sure ls and `ls -R' do the right thing when invoked with no arguments. +# make sure ls and 'ls -R' do the right thing when invoked with no arguments. # Copyright (C) 2001, 2003-2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/ls/symlink-slash b/tests/ls/symlink-slash index 71cee568d..5adfdadcd 100755 --- a/tests/ls/symlink-slash +++ b/tests/ls/symlink-slash @@ -24,7 +24,7 @@ ln -s dir symlink || framework_failure_ set `ls -l symlink/` -# Prior to fileutils-4.0k, the following would have output `... symlink -> dir'. +# Prior to fileutils-4.0k, the following would have output '... symlink -> dir'. test "$*" = 'total 0' && : || fail=1 Exit $fail diff --git a/tests/ls/time-style-diag b/tests/ls/time-style-diag index ba8c1c88a..ae41c9361 100755 --- a/tests/ls/time-style-diag +++ b/tests/ls/time-style-diag @@ -23,13 +23,13 @@ ls -l --time-style=XX > out 2> err test $? = 2 || fail=1 cat <<\EOF > exp || fail=1 -ls: invalid argument `XX' for `time style' +ls: invalid argument 'XX' for 'time style' Valid arguments are: - [posix-]full-iso - [posix-]long-iso - [posix-]iso - [posix-]locale - - +FORMAT (e.g., +%H:%M) for a `date'-style format + - +FORMAT (e.g., +%H:%M) for a 'date'-style format Try 'ls --help' for more information. EOF diff --git a/tests/misc/basename b/tests/misc/basename index 6bd5e4019..349aac8f5 100755 --- a/tests/misc/basename +++ b/tests/misc/basename @@ -59,7 +59,7 @@ my @Tests = ['10', qw(fs/ s/), {OUT => 'fs'}], ); -# Append a newline to end of each expected `OUT' string. +# Append a newline to end of each expected 'OUT' string. my $t; foreach $t (@Tests) { diff --git a/tests/misc/chcon b/tests/misc/chcon index ef4087f09..caa483143 100755 --- a/tests/misc/chcon +++ b/tests/misc/chcon @@ -71,7 +71,7 @@ EOF compare exp out || fail=1 chcon --verbose -u$u1 f > out || fail=1 -echo 'changing security context of `f'\' > exp +echo 'changing security context of 'f'\' > exp compare exp out || fail=1 Exit $fail diff --git a/tests/misc/csplit b/tests/misc/csplit index ef0da141e..aea2e918f 100755 --- a/tests/misc/csplit +++ b/tests/misc/csplit @@ -48,7 +48,7 @@ EOF compare exp out || fail=1 rm -f in out exp -# `echo |csplit - 1 1' used to abort. +# 'echo |csplit - 1 1' used to abort. echo > in csplit in 1 1 > out 2> err || fail=1 cat <<EOF > exp @@ -58,12 +58,12 @@ cat <<EOF > exp EOF compare exp out || fail=1 cat <<\EOF > experr -csplit: warning: line number `1' is the same as preceding line number +csplit: warning: line number '1' is the same as preceding line number EOF compare experr err || fail=1 rm -f in out exp err experr -# `echo | csplit -b '%0#6.3x' - 1' incorrectly warned about the format +# 'echo | csplit -b '%0#6.3x' - 1' incorrectly warned about the format # up through coreutils 8.6. echo > in csplit -b '%0#6.3x' in 1 > out 2> err || fail=1 @@ -78,16 +78,16 @@ compare 'xx 000' experr || fail=1 compare 'xx 0x001' in || fail=1 rm -f in out exp err experr xx* -# make sure `csplit FILE 0' fails. +# make sure 'csplit FILE 0' fails. echo > in csplit in 0 > out 2> err && fail=1 csplit in 2 1 > out 2>> err && fail=1 csplit in 3 3 > out 2>> err && fail=1 cat <<\EOF > experr csplit: 0: line number must be greater than zero -csplit: line number `1' is smaller than preceding line number, 2 -csplit: warning: line number `3' is the same as preceding line number -csplit: `3': line number out of range +csplit: line number '1' is smaller than preceding line number, 2 +csplit: warning: line number '3' is the same as preceding line number +csplit: '3': line number out of range EOF compare experr err || fail=1 diff --git a/tests/misc/cut b/tests/misc/cut index 8c3676ef0..0ce051ab0 100755 --- a/tests/misc/cut +++ b/tests/misc/cut @@ -123,13 +123,13 @@ my @Tests = # A totally overlapped field shouldn't change anything: ['out-delim2', '-c1-3,2,5-', '--output-d=:', {IN=>"abcdefg\n"}, {OUT=>"abc:efg\n"}], - # Partial overlap: index `2' is not at the start of a range. + # Partial overlap: index '2' is not at the start of a range. ['out-delim3', '-c1-3,2-4,6', '--output-d=:', {IN=>"abcdefg\n"}, {OUT=>"abcd:f\n"}], ['out-delim3a', '-c1-3,2-4,6-', '--output-d=:', {IN=>"abcdefg\n"}, {OUT=>"abcd:fg\n"}], # Ensure that the following two commands produce the same output. - # Before an off-by-1 fix, the output from the former would not contain a `:'. + # Before an off-by-1 fix, the output from the former would not contain a ':'. ['out-delim4', '-c4-,2-3', '--output-d=:', {IN=>"abcdefg\n"}, {OUT=>"bc:defg\n"}], ['out-delim5', '-c2-3,4-', '--output-d=:', diff --git a/tests/misc/date b/tests/misc/date index 61137125e..8a23ca9c6 100755 --- a/tests/misc/date +++ b/tests/misc/date @@ -227,9 +227,9 @@ my @Tests = ['tz-5', '+%:z', {OUT=>"-00:01"}, {ENV=>'TZ=XXX0:01'}], - # Accept %:z with a field width before the `:'. + # Accept %:z with a field width before the ':'. ['tz-5w','+%8:z', {OUT=>"-0000:01"}, {ENV=>'TZ=XXX0:01'}], - # Don't recognize %:z with a field width between the `:' and the `z'. + # Don't recognize %:z with a field width between the ':' and the 'z'. ['tz-5wf', '+%:8z', {OUT=>"%:8z"}, {ENV=>'TZ=XXX0:01'}], ['ns-relative', @@ -242,7 +242,7 @@ my @Tests = # Since coreutils/lib/getdate.y revision 1.96 (post-coreutils-5.3.0), # a command like the following would mistakenly exit nonzero with an - # `invalid date ...' diagnostic, but when run in a time zone for + # 'invalid date ...' diagnostic, but when run in a time zone for # which daylight savings time is in effect for the starting date. # Unfortunately (for ease of testing), if you set TZ at all, this # failure is not triggered, hence the removal of TZ from the environment. @@ -266,7 +266,7 @@ my @Tests = # you get on a system with 32-bit time_t is not the same as # the one you get for a system where it's 64 bits wide: # - date: time 72057594037927935 is out of range - # + date: invalid date `@72057594037927935' + # + date: invalid date '@72057594037927935' {ERR_SUBST => 's/.*//'}, {ERR => "\n"}, {EXIT => 1}, diff --git a/tests/misc/date-sec b/tests/misc/date-sec index 04d8bc4fb..b36b6759f 100755 --- a/tests/misc/date-sec +++ b/tests/misc/date-sec @@ -25,11 +25,11 @@ print_ver_ date # It would be easier simply to sleep for two seconds between two runs # of `date --date="21:04 +0100" +%S` and ensure that both outputs -# are `00', but I prefer not to sleep unconditionally. `make check' +# are '00', but I prefer not to sleep unconditionally. 'make check' # takes long enough as it is. n=0 -# See if the current number of seconds is `00' or just before. +# See if the current number of seconds is '00' or just before. s=`date +%S` case "$s" in 58) n=3;; diff --git a/tests/misc/dirname b/tests/misc/dirname index 5934b25c7..67a374ede 100755 --- a/tests/misc/dirname +++ b/tests/misc/dirname @@ -53,7 +53,7 @@ my @Tests = ['m', qw(''), {OUT => '.'}], ); -# Append a newline to end of each expected `OUT' string. +# Append a newline to end of each expected 'OUT' string. my $t; foreach $t (@Tests) { diff --git a/tests/misc/expr b/tests/misc/expr index be757e2c6..556822848 100755 --- a/tests/misc/expr +++ b/tests/misc/expr @@ -54,7 +54,7 @@ my @Tests = ['paren4', '9 / \( \( 100 % 6 \) - 8 \)', {OUT => '-2'}], ['paren5', '9 + \( 100 % 6 \)', {OUT => '13'}], - # Before 2.0.12, this would output `1'. + # Before 2.0.12, this would output '1'. ['0bang', '00 \< 0!', {OUT => '0'}, {EXIT => 1}], # In 5.1.3 and earlier, these would exit with status 0. @@ -69,7 +69,7 @@ my @Tests = ['orempty', '"" \| ""', {OUT => '0'}, {EXIT => 1}], - # This erroneously succeeded and output `3' before 2.0.12. + # This erroneously succeeded and output '3' before 2.0.12. ['fail-a', '3 + -', {ERR => "$prog: non-integer argument\n"}, {EXIT => 2}], @@ -174,7 +174,7 @@ my @Tests = `expr $big_prod '*' $big_prod '*' $big_prod` or @Tests = grep {$_->[0] !~ /^bignum-/} @Tests; -# Append a newline to end of each expected `OUT' string. +# Append a newline to end of each expected 'OUT' string. my $t; foreach $t (@Tests) { diff --git a/tests/misc/factor b/tests/misc/factor index 71f850ae4..d5565d66c 100755 --- a/tests/misc/factor +++ b/tests/misc/factor @@ -68,7 +68,7 @@ my @Tests = ); # Prepend the command line argument and append a newline to end -# of each expected `OUT' string. +# of each expected 'OUT' string. my $t; Test: diff --git a/tests/misc/help-version b/tests/misc/help-version index b93eb3796..c89d11856 100755 --- a/tests/misc/help-version +++ b/tests/misc/help-version @@ -74,7 +74,7 @@ test "x$v" = "x$VERSION" \ for lang in C fr da; do for i in $built_programs; do - # Skip `test'; it doesn't accept --help or --version. + # Skip 'test'; it doesn't accept --help or --version. test $i = test && continue; # false fails even when invoked with --help or --version. @@ -84,7 +84,7 @@ for lang in C fr da; do continue fi - # The just-built install executable is always named `ginstall'. + # The just-built install executable is always named 'ginstall'. test $i = install && i=ginstall # Make sure they exit successfully, under normal conditions. @@ -95,7 +95,7 @@ for lang in C fr da; do grep "$PACKAGE_BUGREPORT" h-$i > /dev/null || fail=1 rm -f h-$i - # Make sure they fail upon `disk full' error. + # Make sure they fail upon 'disk full' error. if test -w /dev/full && test -c /dev/full; then env $i --help >/dev/full 2>/dev/null && fail=1 env $i --version >/dev/full 2>/dev/null && fail=1 @@ -139,7 +139,7 @@ chown_setup () { args=--version; } mkfifo_setup () { args=--version; } mknod_setup () { args=--version; } # Punt on uptime, since it fails (e.g., failing to get boot time) -# on some systems, and we shouldn't let that stop `make check'. +# on some systems, and we shouldn't let that stop 'make check'. uptime_setup () { args=--version; } # Create a file in the current directory, not in $TMPDIR. @@ -198,7 +198,7 @@ basename_setup () { args=$tmp_in; } dirname_setup () { args=$tmp_in; } expr_setup () { args=foo; } -# Punt, in case GNU `id' hasn't been installed yet. +# Punt, in case GNU 'id' hasn't been installed yet. groups_setup () { args=--version; } pathchk_setup () { args=$tmp_in; } diff --git a/tests/misc/ls-misc b/tests/misc/ls-misc index 32e21c757..1f536005c 100755 --- a/tests/misc/ls-misc +++ b/tests/misc/ls-misc @@ -145,7 +145,7 @@ my @Tests = ['emptydir-x2', 'd d', {OUT => "d:\n\nd:\n"}, $mkdir, $rmdir], ['emptydir-R', '-R d', {OUT => "d:\n"}, $mkdir, $rmdir], - # test `ls -R .' ............................................ + # test 'ls -R .' ............................................ ['R-dot', '--ignore="[a-ce-zA-Z]*" -R .', {OUT => ".:\nd\n\n\./d:\n"}, $mkdir, $rmdir], diff --git a/tests/misc/ls-time b/tests/misc/ls-time index 6a227c4d9..a60b85524 100755 --- a/tests/misc/ls-time +++ b/tests/misc/ls-time @@ -112,8 +112,8 @@ and for tmpfs file systems on Solaris 5.5.1. It is also expected to fail on a btrfs file system until http://bugzilla.redhat.com/591068 is addressed. -In the output below, `c' should have had a ctime more recent than -that of `a', but does not. +In the output below, 'c' should have had a ctime more recent than +that of 'a', but does not. EOF #' ls -ctl --full-time a c diff --git a/tests/misc/md5sum b/tests/misc/md5sum index b01e4c5ad..7c7356535 100755 --- a/tests/misc/md5sum +++ b/tests/misc/md5sum @@ -129,7 +129,7 @@ my @Tests = {ERR=> "$prog: h: no properly formatted MD5 checksum lines found\n"}], ); -# Insert the `--text' argument for each test. +# Insert the '--text' argument for each test. my $t; foreach $t (@Tests) { diff --git a/tests/misc/md5sum-bsd b/tests/misc/md5sum-bsd index d16fe0bcd..8226d7ab7 100755 --- a/tests/misc/md5sum-bsd +++ b/tests/misc/md5sum-bsd @@ -1,5 +1,5 @@ #!/bin/sh -# make sure `md5sum -c' works for alternate BSD format (md5 -r) +# make sure 'md5sum -c' works for alternate BSD format (md5 -r) # Copyright (C) 2011-2012 Free Software Foundation, Inc. diff --git a/tests/misc/nice b/tests/misc/nice index e8753263e..bb7cb5809 100755 --- a/tests/misc/nice +++ b/tests/misc/nice @@ -44,7 +44,7 @@ NA LAST NA ' set $tests -# Require that this test be run at `nice' level 0. +# Require that this test be run at 'nice' level 0. niceness=`nice` if test "$niceness" = 0; then : ok diff --git a/tests/misc/nohup b/tests/misc/nohup index 99af1e66f..e20a22c70 100755 --- a/tests/misc/nohup +++ b/tests/misc/nohup @@ -27,9 +27,9 @@ nohup sh -c 'echo stdout; echo stderr 1>&2' 2>err || fail=1 if test -t 1; then test "`cat nohup.out`" = stdout || fail=1 if test -t 0; then - echo 'nohup: ignoring input and appending output to `nohup.out'\' + echo 'nohup: ignoring input and appending output to 'nohup.out'\' else - echo 'nohup: appending output to `nohup.out'\' + echo 'nohup: appending output to 'nohup.out'\' fi >exp || fail=1 else # Here it should not even exist. @@ -85,8 +85,8 @@ if test -t 1; then fi cat <<\EOF > exp || fail=1 -nohup: appending output to `nohup.out' -nohup: cannot run command `no-such-command': No such file or directory +nohup: appending output to 'nohup.out' +nohup: cannot run command 'no-such-command': No such file or directory EOF # Disable these comparisons. Too much variation in 2nd line. # compare exp err || fail=1 @@ -105,8 +105,8 @@ if test -t 1; then fi cat <<\EOF > exp || fail=1 -nohup: appending output to `nohup.out' -nohup: cannot run command `./k': Permission denied +nohup: appending output to 'nohup.out' +nohup: cannot run command './k': Permission denied EOF # Disable these comparisons. Too much variation in 2nd line. # compare exp err || fail=1 diff --git a/tests/misc/od-N b/tests/misc/od-N index d2169bfd9..4f6c08d3a 100755 --- a/tests/misc/od-N +++ b/tests/misc/od-N @@ -1,5 +1,5 @@ #!/bin/sh -# Verify that `od -N N' reads no more than N bytes of input. +# Verify that 'od -N N' reads no more than N bytes of input. # Copyright (C) 2001, 2004-2012 Free Software Foundation, Inc. diff --git a/tests/misc/printf b/tests/misc/printf index 1a927265c..30e592d48 100755 --- a/tests/misc/printf +++ b/tests/misc/printf @@ -27,7 +27,7 @@ getlimits_ # Verify the 3 methods of specifying "Escape": test $($prog "\x1b\n\33\n\e\n" | uniq -u) && fail=1 -# This would fail (by printing the `--') for printf in sh-utils +# This would fail (by printing the '--') for printf in sh-utils # and in coreutils 4.5.1. $prog -- 'foo\n' > out || fail=1 cat <<\EOF > exp @@ -53,13 +53,13 @@ POSIXLY_CORRECT=1 \ $prog '4 \x40\n' >> out || fail=1 $prog '5 % +d\n' 234 >> out || fail=1 -# This should print "6 !\n", but don't rely on `!' being the +# This should print "6 !\n", but don't rely on '!' being the # one-byte representation of octal 041. With printf prior to # coreutils-5.0.1, it would print six bytes: "6 \41\n". $prog '6 \41\n' | tr '\41' '!' >> out # Note that as of coreutils-5.0.1, printf with a format of '\0002x' -# prints a NUL byte followed by the digit `2' and an `x'. +# prints a NUL byte followed by the digit '2' and an 'x'. # By contrast bash's printf outputs the same thing as $(printf '\2x') does. $prog '7 \2y \02y \002y \0002y\n' |tr '\0\2' '*=' >> out diff --git a/tests/misc/sha1sum b/tests/misc/sha1sum index 811366b67..75d1e4bbb 100755 --- a/tests/misc/sha1sum +++ b/tests/misc/sha1sum @@ -76,7 +76,7 @@ my @Tests = {ERR=> "$prog: z: no properly formatted SHA1 checksum lines found\n"}], ); -# Insert the `--text' argument for each test. +# Insert the '--text' argument for each test. my $t; foreach $t (@Tests) { diff --git a/tests/misc/sha1sum-vec b/tests/misc/sha1sum-vec index 172a0eabc..4c7c06afd 100755 --- a/tests/misc/sha1sum-vec +++ b/tests/misc/sha1sum-vec @@ -522,7 +522,7 @@ foreach $t (@Tests) my $h = $t->[2]; $h->{OUT} = lc $h->{OUT} . " f\n"; - # Insert the `--text' argument for each test. + # Insert the '--text' argument for each test. splice @$t, 1, 0, '--text'; } diff --git a/tests/misc/sha224sum b/tests/misc/sha224sum index 9179ace8d..5efc961ed 100755 --- a/tests/misc/sha224sum +++ b/tests/misc/sha224sum @@ -34,7 +34,7 @@ my @Tests = {OUT=>"20794655980c91d8bbb4c1ea97618a4bf03f42581948b2ee4ee7ad67 f\n"}], ); -# Insert the `--text' argument for each test. +# Insert the '--text' argument for each test. my $t; foreach $t (@Tests) { diff --git a/tests/misc/sha256sum b/tests/misc/sha256sum index 44fbc1d6f..d8ac08208 100755 --- a/tests/misc/sha256sum +++ b/tests/misc/sha256sum @@ -40,7 +40,7 @@ my @Tests = {OUT=>"cdc76e5c9914fb9281a1c7e284d73e67f1809a48a497200e046d39ccc7112cd0 f\n"}], ); -# Insert the `--text' argument for each test. +# Insert the '--text' argument for each test. my $t; foreach $t (@Tests) { diff --git a/tests/misc/sha384sum b/tests/misc/sha384sum index 8fc06ab61..8d688e77e 100755 --- a/tests/misc/sha384sum +++ b/tests/misc/sha384sum @@ -40,7 +40,7 @@ my @Tests = {OUT=>"9d0e1809716474cb086e834e310a4a1ced149e9c00f248527972cec5704c2a5b07b8b3dc38ecc4ebae97ddd87f3d8985 f\n"}], ); -# Insert the `--text' argument for each test. +# Insert the '--text' argument for each test. my $t; foreach $t (@Tests) { diff --git a/tests/misc/sha512sum b/tests/misc/sha512sum index bf525861a..0c976d56e 100755 --- a/tests/misc/sha512sum +++ b/tests/misc/sha512sum @@ -40,7 +40,7 @@ my @Tests = {OUT=>"e718483d0ce769644e2e42c7bc15b4638e1f98b13b2044285632a803afa973ebde0ff244877ea60a4cb0432ce577c31beb009c5c2c49aa2e4eadb217ad8cc09b f\n"}], ); -# Insert the `--text' argument for each test. +# Insert the '--text' argument for each test. my $t; foreach $t (@Tests) { diff --git a/tests/misc/sort b/tests/misc/sort index 64fb1023a..ea27faa25 100755 --- a/tests/misc/sort +++ b/tests/misc/sort @@ -156,10 +156,10 @@ my @Tests = ["07l", '-s +0 -1.2', {IN=>"a c\na b\n"}, {OUT=>"a b\na c\n"}], ["07m", '-s +0 -1.1b', {IN=>"a c\na b\n"}, {OUT=>"a b\na c\n"}], # -# report an error for `.' without following char spec +# report an error for '.' without following char spec ["08a", '-k 2.,3', {EXIT=>2}, {ERR=>"$prog: invalid number after `.': invalid count at start of `,3'\n"}], -# report an error for `,' without following POS2 +# report an error for ',' without following POS2 ["08b", '-k 2,', {EXIT=>2}, {ERR=>"$prog: invalid number after `,': invalid count at start of `'\n"}], # @@ -172,12 +172,12 @@ my @Tests = # # Bug reported by Roger Peel <R.Peel@ee.surrey.ac.uk> ["10a", '-t : -k 2.2,2.2', {IN=>":ba\n:ab\n"}, {OUT=>":ba\n:ab\n"}], -# Equivalent to above, but using obsolescent `+pos -pos' option syntax. +# Equivalent to above, but using obsolescent '+pos -pos' option syntax. ["10b", '-t : +1.1 -1.2', {IN=>":ba\n:ab\n"}, {OUT=>":ba\n:ab\n"}], # # The same as the preceding two, but with input lines reversed. ["10c", '-t : -k 2.2,2.2', {IN=>":ab\n:ba\n"}, {OUT=>":ba\n:ab\n"}], -# Equivalent to above, but using obsolescent `+pos -pos' option syntax. +# Equivalent to above, but using obsolescent '+pos -pos' option syntax. ["10d", '-t : +1.1 -1.2', {IN=>":ab\n:ba\n"}, {OUT=>":ba\n:ab\n"}], # Try without -t... # But note that we have to count the delimiting space at the beginning @@ -205,10 +205,10 @@ my @Tests = # and the second key spec isn't even used. ["11d", '-t: -k2,2b -k3,3', {IN=>"z:a :b\na\t:a\n"}, {OUT=>"a\t:a\nz:a :b\n"}], # -# Exercise bug re comparing `-' and integers. +# Exercise bug re comparing '-' and integers. ["12a", '-n -t: +1', {IN=>"a:1\nb:-\n"}, {OUT=>"b:-\na:1\n"}], ["12b", '-n -t: +1', {IN=>"b:-\na:1\n"}, {OUT=>"b:-\na:1\n"}], -# Try some other (e.g. `X') invalid character. +# Try some other (e.g. 'X') invalid character. ["12c", '-n -t: +1', {IN=>"a:1\nb:X\n"}, {OUT=>"b:X\na:1\n"}], ["12d", '-n -t: +1', {IN=>"b:X\na:1\n"}, {OUT=>"b:X\na:1\n"}], # From Karl Heuer @@ -236,22 +236,22 @@ my @Tests = # of sort from textutils-1.19p and before. ["17", '-c', {IN=>"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\n"}], -# POSIX says -n no longer implies -b, so here we're comparing ` 9' and `10'. +# POSIX says -n no longer implies -b, so here we're comparing ' 9' and '10'. ["18a", '-k1.1,1.2n', {IN=>" 901\n100\n"}, {OUT=>" 901\n100\n"}], -# Just like above, because the global `-b' has no effect on the -# key specifier when a key-specific option (`n' in this case) is used. +# Just like above, because the global '-b' has no effect on the +# key specifier when a key-specific option ('n' in this case) is used. ["18b", '-b -k1.1,1.2n', {IN=>" 901\n100\n"}, {OUT=>" 901\n100\n"}], -# Here we're comparing ` 90' and `10', because the `b' on the key-end specifier +# Here we're comparing ' 90' and '10', because the 'b' on the key-end specifier # makes sort ignore leading blanks when determining that key's *end*. ["18c", '-k1.1,1.2nb', {IN=>" 901\n100\n"}, {OUT=>"100\n 901\n"}], -# Here we're comparing `9' and `10', because the `b' on the key-start specifier +# Here we're comparing '9' and '10', because the 'b' on the key-start specifier # makes sort ignore leading blanks when determining that key's *start*. ["18d", '-k1.1b,1.2n', {IN=>" 901\n100\n"}, {OUT=>" 901\n100\n"}], -# This compares `90' and `10', as it ignores leading blanks for both +# This compares '90' and '10', as it ignores leading blanks for both # key start and key end. ["18e", '-nb -k1.1,1.2', {IN=>" 901\n100\n"}, {OUT=>"100\n 901\n"}], @@ -289,7 +289,7 @@ my @Tests = # Demonstrate that folding changes the ordering of e.g. A, a, and _ # because while they normally (in the C locale) collate like A, _, a, -# when using -f, `a' is compared as if it were `A'. +# when using -f, 'a' is compared as if it were 'A'. ["21a", '', {IN=>"A\na\n_\n"}, {OUT=>"A\n_\na\n"}], ["21b", '-f', {IN=>"A\na\n_\n"}, {OUT=>"A\na\n_\n"}], ["21c", '-f', {IN=>"a\nA\n_\n"}, {OUT=>"A\na\n_\n"}], diff --git a/tests/misc/sort-compress b/tests/misc/sort-compress index 085b320f0..09d6720d8 100755 --- a/tests/misc/sort-compress +++ b/tests/misc/sort-compress @@ -35,7 +35,7 @@ EOF chmod +x gzip -# Ensure `sort` is immune to parent's SIGCHLD handler +# Ensure 'sort` is immune to parent's SIGCHLD handler # Use a subshell and an exec to work around a bug in FreeBSD 5.0 /bin/sh. ( # ash doesn't support "trap '' CHLD"; it knows only signal numbers. diff --git a/tests/misc/sort-debug-warn b/tests/misc/sort-debug-warn index f7dea8c91..504a2d2bc 100755 --- a/tests/misc/sort-debug-warn +++ b/tests/misc/sort-debug-warn @@ -27,27 +27,27 @@ sort: key 1 has zero width and will be ignored sort: using simple byte comparison sort: key 1 is numeric and spans multiple fields sort: using simple byte comparison -sort: options `-bghMRrV' are ignored +sort: options '-bghMRrV' are ignored sort: using simple byte comparison -sort: options `-bghMRV' are ignored -sort: option `-r' only applies to last-resort comparison +sort: options '-bghMRV' are ignored +sort: option '-r' only applies to last-resort comparison sort: using simple byte comparison -sort: option `-r' only applies to last-resort comparison +sort: option '-r' only applies to last-resort comparison sort: using simple byte comparison -sort: options `-bg' are ignored +sort: options '-bg' are ignored sort: using simple byte comparison sort: using simple byte comparison -sort: option `-b' is ignored +sort: option '-b' is ignored sort: using simple byte comparison sort: using simple byte comparison sort: using simple byte comparison -sort: leading blanks are significant in key 1; consider also specifying `b' +sort: leading blanks are significant in key 1; consider also specifying 'b' sort: using simple byte comparison -sort: leading blanks are significant in key 1; consider also specifying `b' -sort: option `-d' is ignored +sort: leading blanks are significant in key 1; consider also specifying 'b' +sort: option '-d' is ignored sort: using simple byte comparison -sort: leading blanks are significant in key 1; consider also specifying `b' -sort: option `-i' is ignored +sort: leading blanks are significant in key 1; consider also specifying 'b' +sort: option '-i' is ignored sort: using simple byte comparison sort: using simple byte comparison sort: using simple byte comparison @@ -76,11 +76,11 @@ compare exp out || fail=1 cat <<\EOF > exp sort: using simple byte comparison sort: key 1 is numeric and spans multiple fields -sort: obsolescent key `+2 -1' used; consider `-k 3,1' instead +sort: obsolescent key '+2 -1' used; consider '-k 3,1' instead sort: key 2 has zero width and will be ignored -sort: leading blanks are significant in key 2; consider also specifying `b' -sort: option `-b' is ignored -sort: option `-r' only applies to last-resort comparison +sort: leading blanks are significant in key 2; consider also specifying 'b' +sort: option '-b' is ignored +sort: option '-r' only applies to last-resort comparison EOF sort --debug -rb -k2n +2.2 -1b /dev/null 2>out diff --git a/tests/misc/sort-files0-from b/tests/misc/sort-files0-from index 80ad423ce..1b362ac45 100755 --- a/tests/misc/sort-files0-from +++ b/tests/misc/sort-files0-from @@ -43,7 +43,7 @@ my @Tests = # input file name of '-' ['minus-in-stdin', '--files0-from=-', '<', {IN=>{f=>'-'}}, {EXIT=>2}, {ERR => "$prog: when reading file names from stdin, no file name of" - . " `-' allowed\n"}], + . " '-' allowed\n"}], # empty input, regular file ['empty', '--files0-from=@AUX@', {AUX=>''}, {EXIT=>2}, @@ -58,7 +58,7 @@ my @Tests = {ERR => "$prog: -:1: invalid zero-length file name\n"}], # two NULs - # Note that the behavior here differs from `wc' in that the + # Note that the behavior here differs from 'wc' in that the # first zero-length file name is treated as fatal, so there # is only one line of diagnostic output. ['nul-2', '--files0-from=-', '<', {IN=>"\0\0"}, {EXIT=>2}, @@ -81,7 +81,7 @@ my @Tests = {IN=>{f=>"g\0g\0"}}, {AUX=>{g=>'a'}}, {OUT=>"a\na\n"} ], # Ensure that $prog does nothing when there is a zero-length filename. - # Note that the behavior here differs from `wc' in that the + # Note that the behavior here differs from 'wc' in that the # first zero-length file name is treated as fatal, so there # should be no output on STDOUT. ['zero-len', '--files0-from=-', '<', diff --git a/tests/misc/stdbuf b/tests/misc/stdbuf index 4420deda0..99bb24300 100755 --- a/tests/misc/stdbuf +++ b/tests/misc/stdbuf @@ -96,7 +96,7 @@ retry_delay_ stdbuf_unbuffer .1 6 || fail=1 # One could remove the need for dd (used to close the fifo to get uniq to quit # early), if head -n1 read stdin char by char. Note uniq | head -c2 doesn't # suffice due to the buffering implicit in the pipe. sed currently does read -# stdin char by char, so we can test with `sed 1q`. However I'm wary about +# stdin char by char, so we can test with 'sed 1q`. However I'm wary about # adding this dependency on a program outside of coreutils. # printf '2\n' > exp # printf '1\n2\n' | (stdbuf -i0 sed 1q >/dev/null; cat) > out diff --git a/tests/misc/stty b/tests/misc/stty index 689fb8d37..c2999417c 100755 --- a/tests/misc/stty +++ b/tests/misc/stty @@ -56,9 +56,9 @@ stty -raw -a 2>/dev/null && fail=1 sed_del='/^speed/d;/^rows/d;/^columns/d;/ = /d' options=`stty -a | tr -s ';' '\n' | sed "s/^ //;$sed_del;s/-//g"` -# Take them one at a time, with and without the leading `-'. +# Take them one at a time, with and without the leading '-'. for opt in $options; do - # `stty parenb' and `stty -parenb' fail with this message + # 'stty parenb' and 'stty -parenb' fail with this message # stty: standard input: unable to perform all requested operations # on Linux 2.2.0-pre4 kernels. Also since around Linux 2.6.30 # other serial control settings give the same error. So skip them. @@ -68,7 +68,7 @@ for opt in $options; do stty $opt || fail=1 - # Likewise, `stty -cread' would fail, so skip that, too. + # Likewise, 'stty -cread' would fail, so skip that, too. test $opt = cread && continue rev=`eval echo "\\\$REV_$opt"` if test -n "$rev"; then diff --git a/tests/misc/stty-row-col b/tests/misc/stty-row-col index b0319b21a..9a498e85a 100755 --- a/tests/misc/stty-row-col +++ b/tests/misc/stty-row-col @@ -16,7 +16,7 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -# Setting this envvar to a very small value used to cause e.g., `stty size' +# Setting this envvar to a very small value used to cause e.g., 'stty size' # to generate slightly different output on certain systems. COLUMNS=80 export COLUMNS diff --git a/tests/misc/sum-sysv b/tests/misc/sum-sysv index 4d5454cc3..6132ee1bc 100755 --- a/tests/misc/sum-sysv +++ b/tests/misc/sum-sysv @@ -1,5 +1,5 @@ #!/bin/sh -# make sure `sum -s' works for input whose sum of bytes is larger than 2^32 +# make sure 'sum -s' works for input whose sum of bytes is larger than 2^32 # Copyright (C) 2001-2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/misc/tail b/tests/misc/tail index 69392b3e0..910297664 100755 --- a/tests/misc/tail +++ b/tests/misc/tail @@ -39,7 +39,7 @@ my @tv = ( ['obs-plus-l4', '+1l', "x\ny\n", "x\ny\n", 0], ['obs-plus-l5', '+2l', "x\ny\n", "y\n", 0], -# Same as -l tests, but without the `l'. +# Same as -l tests, but without the 'l'. ['obs-1', '-1', 'x', 'x', 0], ['obs-2', '-1', "x\ny\n", "y\n", 0], ['obs-3', '-1', "x\ny", "y", 0], @@ -64,12 +64,12 @@ my @tv = ( ['err-3', '+2cz', '', '', 1, "$prog: cannot open `+2cz' for reading: No such file or directory\n"], -# This should get `tail: invalid option -- 2' +# This should get 'tail: invalid option -- 2' ['err-4', '-2cX', '', '', 1, "$prog: option used in invalid context -- 2\n"], # Since the number is larger than 2^64, this should provoke -# the diagnostic: `tail: 99999999999999999999: invalid number of bytes' +# the diagnostic: 'tail: 99999999999999999999: invalid number of bytes' # on all systems... probably, for now, maybe. ['err-5', '-c99999999999999999999', '', '', 1, "$prog: 99999999999999999999: invalid number of bytes\n"], diff --git a/tests/misc/test b/tests/misc/test index 356268b8e..aad07d057 100755 --- a/tests/misc/test +++ b/tests/misc/test @@ -68,7 +68,7 @@ sub add_inverse_op_tests($) my ($flags, $ret, $LoH) = digest_test $t; # Generate corresponding tests of inverse ops. - # E.g. generate tests of `-ge' from those of `-lt'. + # E.g. generate tests of '-ge' from those of '-lt'. foreach my $op (qw(gt lt eq)) { if ($test_name =~ /$op-/ && $flags =~ / -$op /) diff --git a/tests/misc/timeout b/tests/misc/timeout index 997728060..cc1ad3d6e 100755 --- a/tests/misc/timeout +++ b/tests/misc/timeout @@ -42,7 +42,7 @@ test $? = 124 || fail=1 timeout -s0 -k1 1 sleep 10 test $? = 124 && fail=1 -# Ensure `timeout` is immune to parent's SIGCHLD handler +# Ensure 'timeout` is immune to parent's SIGCHLD handler # Use a subshell and an exec to work around a bug in FreeBSD 5.0 /bin/sh. ( # ash doesn't support "trap '' CHLD"; it knows only signal numbers. diff --git a/tests/misc/wc-files0-from b/tests/misc/wc-files0-from index ac2211345..ac96c98d4 100755 --- a/tests/misc/wc-files0-from +++ b/tests/misc/wc-files0-from @@ -43,7 +43,7 @@ my @Tests = # input file name of '-' ['minus-in-stdin', '--files0-from=-', '<', {IN=>{f=>'-'}}, {EXIT=>1}, {ERR => "$prog: when reading file names from stdin, no file name of" - . " `-' allowed\n"}], + . " '-' allowed\n"}], # empty input, regular file ['empty', '--files0-from=@AUX@', {AUX=>''}], diff --git a/tests/mkdir/p-v b/tests/mkdir/p-v index e1596ee02..d6dcfdd87 100755 --- a/tests/mkdir/p-v +++ b/tests/mkdir/p-v @@ -22,11 +22,11 @@ print_ver_ mkdir mkdir -pv foo/a/b/c/d >out || fail=1 compare - out <<\EOF -mkdir: created directory `foo' -mkdir: created directory `foo/a' -mkdir: created directory `foo/a/b' -mkdir: created directory `foo/a/b/c' -mkdir: created directory `foo/a/b/c/d' +mkdir: created directory 'foo' +mkdir: created directory 'foo/a' +mkdir: created directory 'foo/a/b' +mkdir: created directory 'foo/a/b/c' +mkdir: created directory 'foo/a/b/c/d' EOF Exit $fail diff --git a/tests/mkdir/parents b/tests/mkdir/parents index 9fa301157..9e533215d 100755 --- a/tests/mkdir/parents +++ b/tests/mkdir/parents @@ -23,8 +23,8 @@ skip_if_setgid_ mkdir -m 700 e-dir || framework_failure_ -# Make sure `mkdir -p existing-dir' succeeds -# and that `mkdir existing-dir' fails. +# Make sure 'mkdir -p existing-dir' succeeds +# and that 'mkdir existing-dir' fails. mkdir -p e-dir || fail=1 mkdir e-dir > /dev/null 2>&1 && fail=1 @@ -34,18 +34,18 @@ mode_str=drwxr-x-wx mode_arg=`rwx_to_mode_ $mode_str` mkdir -m $mode_arg a || fail=1 -# this `mkdir -p ...' shouldn't change perms of existing dir `a'. +# this 'mkdir -p ...' shouldn't change perms of existing dir 'a'. d_mode_str=drwx-w--wx d_mode_arg=`rwx_to_mode_ $d_mode_str` mkdir -p -m $d_mode_arg a/b/c/d -# Make sure the permissions of `a' haven't been changed. +# Make sure the permissions of 'a' haven't been changed. p=`ls -ld a|cut -b-10`; case $p in $mode_str);; *) fail=1;; esac -# `b's and `c's should reflect the umask +# 'b's and 'c's should reflect the umask p=`ls -ld a/b|cut -b-10`; case $p in drwx------);; *) fail=1;; esac p=`ls -ld a/b/c|cut -b-10`; case $p in drwx------);; *) fail=1;; esac -# `d's perms are determined by the -m argument. +# 'd's perms are determined by the -m argument. p=`ls -ld a/b/c/d|cut -b-10`; case $p in $d_mode_str);; *) fail=1;; esac Exit $fail diff --git a/tests/mkdir/perm b/tests/mkdir/perm index bec30ae9b..048fafcc0 100755 --- a/tests/mkdir/perm +++ b/tests/mkdir/perm @@ -1,5 +1,5 @@ #!/bin/sh -# Verify that mkdir's `-m MODE' option works properly +# Verify that mkdir's '-m MODE' option works properly # with various umask settings. # Copyright (C) 2000, 2002-2012 Free Software Foundation, Inc. diff --git a/tests/mv/backup-dir b/tests/mv/backup-dir index f28e5b4c1..40f2c756a 100755 --- a/tests/mv/backup-dir +++ b/tests/mv/backup-dir @@ -23,10 +23,10 @@ mkdir A B || framework_failure_ touch X Y || framework_failure_ -# Before coreutils-6.2, the " (backup: `B.~1~')" suffix was not printed. +# Before coreutils-6.2, the " (backup: 'B.~1~')" suffix was not printed. mv --verbose --backup=numbered -T A B > out || fail=1 cat <<\EOF > exp || fail=1 -`A' -> `B' (backup: `B.~1~') +'A' -> 'B' (backup: 'B.~1~') EOF compare exp out || fail=1 diff --git a/tests/mv/backup-is-src b/tests/mv/backup-is-src index 5fc2ecf52..ce51001a5 100755 --- a/tests/mv/backup-is-src +++ b/tests/mv/backup-is-src @@ -38,7 +38,7 @@ sed \ out > out2 cat > exp <<\EOF -XXX: backing up `YYY' would destroy source; `ZZZ' not moved +XXX: backing up 'YYY' would destroy source; 'ZZZ' not moved EOF compare exp out2 || fail=1 diff --git a/tests/mv/diag b/tests/mv/diag index c8ba7f3e7..7fbe46bd6 100755 --- a/tests/mv/diag +++ b/tests/mv/diag @@ -37,10 +37,10 @@ mv --target=f2 f1 >> out 2>&1 && fail=1 cat > exp <<\EOF mv: missing file operand Try 'mv --help' for more information. -mv: missing destination file operand after `no-file' +mv: missing destination file operand after 'no-file' Try 'mv --help' for more information. -mv: target `f1' is not a directory -mv: target `f2' is not a directory +mv: target 'f1' is not a directory +mv: target 'f2' is not a directory EOF compare exp out || fail=1 diff --git a/tests/mv/dir2dir b/tests/mv/dir2dir index 133be8328..c170de20a 100755 --- a/tests/mv/dir2dir +++ b/tests/mv/dir2dir @@ -34,7 +34,7 @@ sed 's/: File exists/: Directory not empty/'<out>o1;mv o1 out sed 's/: Device or resource busy/: Directory not empty/'<out>o1;mv o1 out cat <<\EOF > exp || fail=1 -mv: cannot move `b/t' to `a/t': Directory not empty +mv: cannot move 'b/t' to 'a/t': Directory not empty EOF compare exp out || fail=1 diff --git a/tests/mv/dup-source b/tests/mv/dup-source index 7a34472d8..0b102b9bc 100755 --- a/tests/mv/dup-source +++ b/tests/mv/dup-source @@ -37,7 +37,7 @@ for i in cp; do rm -fr a d; touch a; mkdir d $i --backup=numbered a a d/ 2>> out || fail=1 - # But not with plain `--backup' + # But not with plain '--backup' rm -fr a d; touch a; mkdir d $i --backup a a d/ 2>> out && fail=1 cat <<EOF > exp diff --git a/tests/mv/hard-3 b/tests/mv/hard-3 index 8f51606e2..9a7a2a376 100755 --- a/tests/mv/hard-3 +++ b/tests/mv/hard-3 @@ -22,11 +22,11 @@ # To exercise this bug is non-trivial: # Set-up requires at least three hard-linked files. In copying them, # while preserving links, the initial copy must succeed, the attempt -# to create the second file via `link' must fail, and the final `link' +# to create the second file via 'link' must fail, and the final 'link' # (to create the third) must succeed. Before the corresponding fix, # the first and third destination files would not be linked. # -# Note that this is nominally a test of `cp', yet it is in the tests/mv +# Note that this is nominally a test of 'cp', yet it is in the tests/mv # directory, because it requires use of the --preserve=link option that # mv enables by default. diff --git a/tests/mv/hard-verbose b/tests/mv/hard-verbose index f6c63852e..41c4187ea 100755 --- a/tests/mv/hard-verbose +++ b/tests/mv/hard-verbose @@ -25,7 +25,7 @@ ln x y || framework_failure_ mv --verbose x y > out || fail=1 cat <<\EOF > exp || fail=1 -removed `x' +removed 'x' EOF compare exp out || fail=1 diff --git a/tests/mv/i-1 b/tests/mv/i-1 index b2eb59c22..20b6ad7b9 100755 --- a/tests/mv/i-1 +++ b/tests/mv/i-1 @@ -1,5 +1,5 @@ #!/usr/bin/perl -# Make sure a `n' reply to `mv -i...' aborts the move operation. +# Make sure a 'n' reply to 'mv -i...' aborts the move operation. # Copyright (C) 2001, 2003, 2005-2012 Free Software Foundation, Inc. @@ -27,7 +27,7 @@ my $test_a = 'a'; my @Tests = ( - # Make sure a `n' reply to `mv -i...' aborts the move operation. + # Make sure a 'n' reply to 'mv -i...' aborts the move operation. [$test_a, '-i', {IN => {src => "a\n"}}, {IN => {dst => "b\n"}}, '<', {IN => "n\n"}, {ERR => "mv: overwrite `dst'? "}, diff --git a/tests/mv/i-3 b/tests/mv/i-3 index 1851d42d8..050377d35 100755 --- a/tests/mv/i-3 +++ b/tests/mv/i-3 @@ -1,6 +1,6 @@ #!/bin/sh -# Make sure that `mv file unwritable-file' prompts the user -# and that `mv -f file unwritable-file' doesn't. +# Make sure that 'mv file unwritable-file' prompts the user +# and that 'mv -f file unwritable-file' doesn't. # Copyright (C) 2001, 2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/mv/i-4 b/tests/mv/i-4 index b2222c778..5a95e9963 100755 --- a/tests/mv/i-4 +++ b/tests/mv/i-4 @@ -1,5 +1,5 @@ #!/bin/sh -# make sure `mv -i a b' does its job with a positive response +# make sure 'mv -i a b' does its job with a positive response # Copyright (C) 2001, 2005-2012 Free Software Foundation, Inc. @@ -32,9 +32,9 @@ case "`cat b`" in *) fail=1 ;; esac -# Ensure that mv -i a b works properly with `n' and `y' +# Ensure that mv -i a b works properly with 'n' and 'y' # responses, even when a and b are hard links to the same file. -# This `n' test would fail (no prompt) for coreutils-5.0.1 through 5.3.0. +# This 'n' test would fail (no prompt) for coreutils-5.0.1 through 5.3.0. echo n > n rm -f a b echo a > a diff --git a/tests/mv/i-5 b/tests/mv/i-5 index 374c6beda..76cacabe3 100755 --- a/tests/mv/i-5 +++ b/tests/mv/i-5 @@ -1,5 +1,5 @@ #!/bin/sh -# Make sure `mv -i dir file' prompts before failing. +# Make sure 'mv -i dir file' prompts before failing. # Copyright (C) 2006-2012 Free Software Foundation, Inc. diff --git a/tests/mv/into-self b/tests/mv/into-self index 1405b7fb6..87c2d8e40 100755 --- a/tests/mv/into-self +++ b/tests/mv/into-self @@ -37,7 +37,7 @@ sed \ out > out2 cat > exp <<\EOF -XXX: cannot move `SRC' to a subdirectory of itself, `DEST' +XXX: cannot move 'SRC' to a subdirectory of itself, 'DEST' EOF compare exp out2 || fail=1 diff --git a/tests/mv/into-self-2 b/tests/mv/into-self-2 index ddbf2ec53..d5d921857 100755 --- a/tests/mv/into-self-2 +++ b/tests/mv/into-self-2 @@ -43,7 +43,7 @@ sed \ out > out2 cat > exp <<\EOF -XXX: `ZZZ' and `YYY' are the same file +XXX: 'ZZZ' and 'YYY' are the same file EOF #' diff --git a/tests/mv/into-self-3 b/tests/mv/into-self-3 index 1042d1364..ec7d02cc7 100755 --- a/tests/mv/into-self-3 +++ b/tests/mv/into-self-3 @@ -33,7 +33,7 @@ sed \ out > out2 cat > exp <<\EOF -XXX: cannot move `ZZZ' to a subdirectory of itself, `ZZZ/ZZZ' +XXX: cannot move 'ZZZ' to a subdirectory of itself, 'ZZZ/ZZZ' EOF compare exp out2 || fail=1 diff --git a/tests/mv/into-self-4 b/tests/mv/into-self-4 index 717e12ea0..8df87a2cc 100755 --- a/tests/mv/into-self-4 +++ b/tests/mv/into-self-4 @@ -1,5 +1,5 @@ #!/bin/sh -# confirm that `mv symlink symlink' doesn't remove symlink +# confirm that 'mv symlink symlink' doesn't remove symlink # Based on an example from David Luyer. # Copyright (C) 2001, 2004, 2006-2012 Free Software Foundation, Inc. @@ -28,7 +28,7 @@ ln -s file s || framework_failure_ mv s s 2> /dev/null && fail=1 # But the symlink, s, must not be removed. -# Before 4.0.36, `s' would have been removed. +# Before 4.0.36, 's' would have been removed. test -f s || fail=1 Exit $fail diff --git a/tests/mv/part-fail b/tests/mv/part-fail index ed74e02b5..f5d2bb3ee 100755 --- a/tests/mv/part-fail +++ b/tests/mv/part-fail @@ -1,8 +1,8 @@ #!/bin/sh -# Make sure we give a sensible diagnostic when a cross-device `mv' +# Make sure we give a sensible diagnostic when a cross-device 'mv' # fails, e.g., because the destination cannot be unlinked. # This is a bit fragile since it relies on the string used -# for EPERM: `permission denied'. +# for EPERM: 'permission denied'. # Copyright (C) 2002, 2004, 2006-2012 Free Software Foundation, Inc. @@ -31,7 +31,7 @@ chmod u-w "$other_partition_tmpdir" || framework_failure_ mv -f k "$other_partition_tmpdir" 2> out && fail=1 printf \ -'mv: inter-device move failed: `%s'\'' to `%s'\'';'\ +'mv: inter-device move failed: '%s'\'' to '%s'\'';'\ ' unable to remove target: Permission denied\n' \ k "$other_partition_tmpdir/k" >exp diff --git a/tests/mv/part-symlink b/tests/mv/part-symlink index bb0ccaaad..82a82c674 100755 --- a/tests/mv/part-symlink +++ b/tests/mv/part-symlink @@ -24,12 +24,12 @@ cleanup_() { rm -rf "$other_partition_tmpdir"; } . "$abs_srcdir/other-fs-tmpdir" # On NFS on Linux 2.6.9 at least we get: -# mv: preserving permissions for `rem_sl': Operation not supported +# mv: preserving permissions for 'rem_sl': Operation not supported require_local_dir_ pwd_tmp=`pwd` -# Unset CDPATH. Otherwise, output from the `cd dir' command +# Unset CDPATH. Otherwise, output from the 'cd dir' command # can make this test fail. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH @@ -152,7 +152,7 @@ test $fail = 1 && cat <<\EOF > expected 1 cp loc_reg rem_sl - [cp: `loc_reg' and `rem_sl' are the same file] + [cp: 'loc_reg' and 'rem_sl' are the same file] (loc_reg) (rem_sl -> dir/loc_reg) 0 cp --rem loc_reg rem_sl (loc_reg) (rem_sl) @@ -165,57 +165,57 @@ cat <<\EOF > expected 0 cp -bd loc_reg rem_sl (loc_reg) (rem_sl rem_sl~ -> dir/loc_reg) 1 cp -d loc_reg rem_sl - [cp: `loc_reg' and `rem_sl' are the same file] + [cp: 'loc_reg' and 'rem_sl' are the same file] (loc_reg) (rem_sl -> dir/loc_reg) 1 cp rem_sl loc_reg - [cp: `rem_sl' and `loc_reg' are the same file] + [cp: 'rem_sl' and 'loc_reg' are the same file] (loc_reg) (rem_sl -> dir/loc_reg) 1 cp --rem rem_sl loc_reg - [cp: `rem_sl' and `loc_reg' are the same file] + [cp: 'rem_sl' and 'loc_reg' are the same file] (loc_reg) (rem_sl -> dir/loc_reg) 1 cp --rem -d rem_sl loc_reg - [cp: `rem_sl' and `loc_reg' are the same file] + [cp: 'rem_sl' and 'loc_reg' are the same file] (loc_reg) (rem_sl -> dir/loc_reg) 1 cp --rem -b rem_sl loc_reg - [cp: `rem_sl' and `loc_reg' are the same file] + [cp: 'rem_sl' and 'loc_reg' are the same file] (loc_reg) (rem_sl -> dir/loc_reg) 1 cp -b rem_sl loc_reg - [cp: `rem_sl' and `loc_reg' are the same file] + [cp: 'rem_sl' and 'loc_reg' are the same file] (loc_reg) (rem_sl -> dir/loc_reg) 0 cp -bd rem_sl loc_reg (loc_reg -> dir/loc_reg loc_reg~) (rem_sl -> dir/loc_reg) symlink-loop symlink-loop 1 cp -d rem_sl loc_reg - [cp: `rem_sl' and `loc_reg' are the same file] + [cp: 'rem_sl' and 'loc_reg' are the same file] (loc_reg) (rem_sl -> dir/loc_reg) 1 cp loc_sl rem_reg - [cp: `loc_sl' and `rem_reg' are the same file] + [cp: 'loc_sl' and 'rem_reg' are the same file] (loc_sl -> rem_reg) (rem_reg) 1 cp --rem loc_sl rem_reg - [cp: `loc_sl' and `rem_reg' are the same file] + [cp: 'loc_sl' and 'rem_reg' are the same file] (loc_sl -> rem_reg) (rem_reg) 1 cp --rem -d loc_sl rem_reg - [cp: `loc_sl' and `rem_reg' are the same file] + [cp: 'loc_sl' and 'rem_reg' are the same file] (loc_sl -> rem_reg) (rem_reg) 1 cp --rem -b loc_sl rem_reg - [cp: `loc_sl' and `rem_reg' are the same file] + [cp: 'loc_sl' and 'rem_reg' are the same file] (loc_sl -> rem_reg) (rem_reg) 1 cp -b loc_sl rem_reg - [cp: `loc_sl' and `rem_reg' are the same file] + [cp: 'loc_sl' and 'rem_reg' are the same file] (loc_sl -> rem_reg) (rem_reg) 0 cp -bd loc_sl rem_reg (loc_sl -> rem_reg) (rem_reg -> rem_reg rem_reg~) symlink-loop symlink-loop 1 cp -d loc_sl rem_reg - [cp: `loc_sl' and `rem_reg' are the same file] + [cp: 'loc_sl' and 'rem_reg' are the same file] (loc_sl -> rem_reg) (rem_reg) 1 cp rem_reg loc_sl - [cp: `rem_reg' and `loc_sl' are the same file] + [cp: 'rem_reg' and 'loc_sl' are the same file] (loc_sl -> rem_reg) (rem_reg) 0 cp --rem rem_reg loc_sl (loc_sl) (rem_reg) @@ -228,7 +228,7 @@ cat <<\EOF > expected 0 cp -bd rem_reg loc_sl (loc_sl loc_sl~ -> rem_reg) (rem_reg) 1 cp -d rem_reg loc_sl - [cp: `rem_reg' and `loc_sl' are the same file] + [cp: 'rem_reg' and 'loc_sl' are the same file] (loc_sl -> rem_reg) (rem_reg) 0 mv loc_reg rem_sl @@ -237,13 +237,13 @@ cat <<\EOF > expected () (rem_sl rem_sl~ -> dir/loc_reg) 1 mv rem_sl loc_reg - [mv: `rem_sl' and `loc_reg' are the same file] + [mv: 'rem_sl' and 'loc_reg' are the same file] (loc_reg) (rem_sl -> dir/loc_reg) 0 mv -b rem_sl loc_reg (loc_reg -> dir/loc_reg loc_reg~) () 1 mv loc_sl rem_reg - [mv: `loc_sl' and `rem_reg' are the same file] + [mv: 'loc_sl' and 'rem_reg' are the same file] (loc_sl -> rem_reg) (rem_reg) 0 mv -b loc_sl rem_reg () (rem_reg -> rem_reg rem_reg~) diff --git a/tests/mv/perm-1 b/tests/mv/perm-1 index 9bdc64e9a..b1c9842ea 100755 --- a/tests/mv/perm-1 +++ b/tests/mv/perm-1 @@ -27,7 +27,7 @@ chmod u-w no-write || framework_failure_ mv no-write/dir . > out 2>&1 && fail=1 cat <<\EOF > exp -mv: cannot move `no-write/dir' to `./dir': Permission denied +mv: cannot move 'no-write/dir' to './dir': Permission denied EOF compare exp out || fail=1 diff --git a/tests/mv/sticky-to-xpart b/tests/mv/sticky-to-xpart index 348a31ad3..954cb8f0e 100755 --- a/tests/mv/sticky-to-xpart +++ b/tests/mv/sticky-to-xpart @@ -1,7 +1,7 @@ #!/bin/sh # A cross-partition move of a file in a sticky tmpdir and owned by # someone else would evoke an invalid diagnostic: -# mv: cannot remove `x': Operation not permitted +# mv: cannot remove 'x': Operation not permitted # Affects coreutils-6.0-6.9. # Copyright (C) 2007-2012 Free Software Foundation, Inc. @@ -53,13 +53,13 @@ esac setuidgid $NON_ROOT_USERNAME env PATH="$PATH" \ mv t/root-owned "$other_partition_tmpdir" 2> out-t && fail=1 -# On some systems, we get `Not owner'. Convert it. -# On other systems (HPUX), we get `Permission denied'. Convert it, too. +# On some systems, we get 'Not owner'. Convert it. +# On other systems (HPUX), we get 'Permission denied'. Convert it, too. onp='Operation not permitted' sed "s/Not owner/$onp/;s/Permission denied/$onp/" out-t > out cat <<\EOF > exp -mv: cannot remove `t/root-owned': Operation not permitted +mv: cannot remove 't/root-owned': Operation not permitted EOF compare exp out || fail=1 diff --git a/tests/mv/vfat b/tests/mv/vfat index 8ed334221..78b1ccc0a 100644 --- a/tests/mv/vfat +++ b/tests/mv/vfat @@ -24,7 +24,7 @@ cat <<\EOF Prior to 5.0.91, ... The problem: - On a VFAT file system with coreutils-5.0.90, `mv FOO foo' removes the + On a VFAT file system with coreutils-5.0.90, 'mv FOO foo' removes the sole copy of the file named by both the source and destination arguments. Demonstrate the problem, as root: @@ -45,9 +45,9 @@ And in case you actually do the above, you can do this to clean up: cd /tmp && umount /tmp/mnt && rm -r 1 mnt Hey! Can't create hard links on vfat. -The above `ln' evokes an `operation not permitted' failure. +The above 'ln' evokes an 'operation not permitted' failure. -This demonstrates the same thing with file system type `umsdos' +This demonstrates the same thing with file system type 'umsdos' No hard links: cd /tmp \ diff --git a/tests/pr/pr-tests b/tests/pr/pr-tests index 0cfca13b2..de1061225 100755 --- a/tests/pr/pr-tests +++ b/tests/pr/pr-tests @@ -308,9 +308,9 @@ my @tv = ( ['13bb', '-t -n: -2 -e8', [\'t_tab'], [\'tn_2e8-t_tab'], 0], ['13bc', '-t -n: -2 -e8 -S----', [\'t_tab'], [\'tn_2e8S-t_tab'], 0], ['13bd', '-t -n -2 -e8 -o3', [\'t_tab'], [\'tn2e8o3-t_tab'], 0], -# number-separator TAB not treated as input text-tab, no `-e' expansion +# number-separator TAB not treated as input text-tab, no '-e' expansion ['13be', '-t -n -2 -e5 -o3', [\'t_tab'], [\'tn2e5o3-t_tab'], 0], -# input-tab-char `:' not equal default (text) TABs +# input-tab-char ':' not equal default (text) TABs ['13bf', '-t -n -2 -e:8', [\'t_tab_'], [\'tn2e8-t_tab'], 0], # # options -w/-s: POSIX-compliant, means adapting the interference of -w/-s @@ -326,10 +326,10 @@ my @tv = ( # columns, truncated = 60 / no separator (SunOS-BUG: line width to small): ['14e', '-2 -s -w60 -f', [\'t_notab'], [\'2sw60f-t_notab'], 0], # columns, truncated = 60 / separator = `:' (HP-UX.10.20-2-BUG: -# `:' missing with -m option): +# ':' missing with -m option): ['14f', '-2 -s: -w60 -f', [\'t_notab'], [\'2s_w60f-t_nota'], 0], # -# new long-options -W/-S/-J disentangle those options (see also No.`10*') +# new long-options -W/-S/-J disentangle those options (see also No.'10*') # columns, truncated = 72 / no separator : ['14g', '-2 -S -f', [\'t_notab'], [\'2-Sf-t_notab'], 0], # full lines, no truncation / separator = TAB : (Input: -S"<TAB>") diff --git a/tests/rm/cycle b/tests/rm/cycle index 48e77c23e..5f1fb3a01 100755 --- a/tests/rm/cycle +++ b/tests/rm/cycle @@ -27,8 +27,8 @@ chmod u-w a/b rm -rf a a 2>&1 | sed 's/:[^:]*$//' > out || fail=1 cat <<\EOF > exp -rm: cannot remove `a/b/file' -rm: cannot remove `a/b/file' +rm: cannot remove 'a/b/file' +rm: cannot remove 'a/b/file' EOF compare exp out || fail=1 diff --git a/tests/rm/deep-1 b/tests/rm/deep-1 index fbda20b35..c3632dd62 100755 --- a/tests/rm/deep-1 +++ b/tests/rm/deep-1 @@ -34,7 +34,7 @@ k200=$k20$k20$k20$k20$k20$k20$k20$k20$k20$k20 # Be careful not to exceed max file name length (usu 512?). # Doing so wouldn't affect GNU mkdir or GNU rm, but any tool that -# operates on the full pathname (like `test') would choke. +# operates on the full pathname (like 'test') would choke. k_deep=$k200$k200 t=t diff --git a/tests/rm/dir-no-w b/tests/rm/dir-no-w index 74dfa0c13..0342956ba 100755 --- a/tests/rm/dir-no-w +++ b/tests/rm/dir-no-w @@ -26,13 +26,13 @@ mkdir --mode=0500 unwritable-dir || framework_failure_ # For rm from coreutils-5.0.1, this would prompt. rm ---presume-input-tty unwritable-dir < /dev/null > out-t 2>&1 && fail=1 cat <<\EOF > exp || fail=1 -rm: cannot remove `unwritable-dir': Is a directory +rm: cannot remove 'unwritable-dir': Is a directory EOF # When run by a non-privileged user we get this: -# rm: cannot remove directory `unwritable-dir': Is a directory +# rm: cannot remove directory 'unwritable-dir': Is a directory # When run by root we get this: -# rm: cannot remove `unwritable-dir': Is a directory +# rm: cannot remove 'unwritable-dir': Is a directory # Normalize the message. sed 's/remove directory/remove/' out-t > out rm -f out-t diff --git a/tests/rm/dir-nonrecur b/tests/rm/dir-nonrecur index edd5d372a..8876e9458 100755 --- a/tests/rm/dir-nonrecur +++ b/tests/rm/dir-nonrecur @@ -1,5 +1,5 @@ #!/bin/sh -# Ensure that `rm dir' (i.e., without --recursive) gives a reasonable +# Ensure that 'rm dir' (i.e., without --recursive) gives a reasonable # diagnostic when failing. # Copyright (C) 2005-2012 Free Software Foundation, Inc. @@ -25,7 +25,7 @@ mkdir d || framework_failure_ rm d 2> out && fail=1 cat <<\EOF > exp || fail=1 -rm: cannot remove `d': Is a directory +rm: cannot remove 'd': Is a directory EOF # Before coreutils-5.93 this test would fail on Solaris 9 and newer. diff --git a/tests/rm/empty-name b/tests/rm/empty-name index 58fb8505d..192a60b4b 100755 --- a/tests/rm/empty-name +++ b/tests/rm/empty-name @@ -18,7 +18,7 @@ # On SunOS 4.1.3, running rm -r '' in a nonempty directory may # actually remove files with names of entries in the current directory -# but relative to `/' rather than relative to the current directory. +# but relative to '/' rather than relative to the current directory. use strict; diff --git a/tests/rm/fail-2eperm b/tests/rm/fail-2eperm index 511464e2b..56c27c438 100755 --- a/tests/rm/fail-2eperm +++ b/tests/rm/fail-2eperm @@ -41,13 +41,13 @@ case $rm_version in esac setuidgid $NON_ROOT_USERNAME env PATH="$PATH" rm -rf a 2> out-t && fail=1 -# On some systems, we get `Not owner'. Convert it. -# On other systems (HPUX), we get `Permission denied'. Convert it, too. +# On some systems, we get 'Not owner'. Convert it. +# On other systems (HPUX), we get 'Permission denied'. Convert it, too. onp='Operation not permitted' sed "s/Not owner/$onp/;s/Permission denied/$onp/" out-t > out cat <<\EOF > exp -rm: cannot remove `a/b': Operation not permitted +rm: cannot remove 'a/b': Operation not permitted EOF compare exp out || fail=1 diff --git a/tests/rm/fail-eacces b/tests/rm/fail-eacces index 1a2d06bb7..947dfac36 100755 --- a/tests/rm/fail-eacces +++ b/tests/rm/fail-eacces @@ -40,14 +40,14 @@ test $ok = 1 || framework_failure_ rm -rf d/f 2> out && fail=1 cat <<\EOF > exp -rm: cannot remove `d/f': Permission denied +rm: cannot remove 'd/f': Permission denied EOF compare exp out || fail=1 # This used to fail with ELOOP. rm -rf e 2> out && fail=1 cat <<\EOF > exp -rm: cannot remove `e/slink': Permission denied +rm: cannot remove 'e/slink': Permission denied EOF compare exp out || fail=1 diff --git a/tests/rm/i-no-r b/tests/rm/i-no-r index d7d3c0186..8a3e76958 100755 --- a/tests/rm/i-no-r +++ b/tests/rm/i-no-r @@ -1,5 +1,5 @@ #!/bin/sh -# Since the rewrite for fileutils-4.1.9, `rm -i DIR' would mistakenly +# Since the rewrite for fileutils-4.1.9, 'rm -i DIR' would mistakenly # recurse into directory DIR. rm -i (without -r) must fail in that case. # Fixed in coreutils-4.5.2. diff --git a/tests/rm/inaccessible b/tests/rm/inaccessible index 2bcdc11d9..517a384f9 100755 --- a/tests/rm/inaccessible +++ b/tests/rm/inaccessible @@ -35,7 +35,7 @@ test -d "$p/abs1" && fail=1 test -d "$p/abs2" && fail=1 cat <<\EOF > exp || fail=1 -rm: cannot remove `rel': Permission denied +rm: cannot remove 'rel': Permission denied EOF # AIX 4.3.3 fails with a different diagnostic. diff --git a/tests/rm/interactive-always b/tests/rm/interactive-always index 99aedbbf7..41c8f4131 100755 --- a/tests/rm/interactive-always +++ b/tests/rm/interactive-always @@ -70,13 +70,13 @@ cat <<\EOF > expout || fail=1 EOF sed 's/@remove_empty/rm: remove regular empty file/g' <<\EOF > experr || fail=1 no WHEN -@remove_empty `file1-1'? @remove_empty `file1-2'? . +@remove_empty 'file1-1'? @remove_empty 'file1-2'? . WHEN=never . WHEN=once rm: remove all arguments recursively? . WHEN=always -@remove_empty `file4-1'? @remove_empty `file4-2'? . +@remove_empty 'file4-1'? @remove_empty 'file4-2'? . -f overrides --interactive . --interactive overrides -f diff --git a/tests/rm/isatty b/tests/rm/isatty index 3b7d1b39d..b1e558b66 100755 --- a/tests/rm/isatty +++ b/tests/rm/isatty @@ -1,5 +1,5 @@ #!/bin/sh -# Make sure `chown 0 f; rm f' prompts before removing f. +# Make sure 'chown 0 f; rm f' prompts before removing f. # Copyright (C) 2001-2012 Free Software Foundation, Inc. @@ -39,14 +39,14 @@ test -f f || fail=1 kill $pid > /dev/null 2>&1 -# Note the trailing `x' -- so I don't have to have a trailing +# Note the trailing 'x' -- so I don't have to have a trailing # blank in this file :-) cat > exp <<\EOF -rm: remove write-protected regular empty file `f'? x +rm: remove write-protected regular empty file 'f'? x EOF #` -# Append an `x' and a newline. +# Append an 'x' and a newline. echo x >> out compare exp out || fail=1 diff --git a/tests/rm/no-give-up b/tests/rm/no-give-up index d0ff23748..690c5b617 100755 --- a/tests/rm/no-give-up +++ b/tests/rm/no-give-up @@ -1,5 +1,5 @@ #!/bin/sh -# With rm from coreutils-5.2.1 and earlier, `rm -r' would mistakenly +# With rm from coreutils-5.2.1 and earlier, 'rm -r' would mistakenly # give up too early under some conditions. # Copyright (C) 2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/rm/one-file-system b/tests/rm/one-file-system index e9a5cf0c6..675c3fd0a 100755 --- a/tests/rm/one-file-system +++ b/tests/rm/one-file-system @@ -36,7 +36,7 @@ mount --bind $t a/b \ || skip_ "This test requires mount with a working --bind option." cat <<\EOF > exp || framework_failure_ -rm: skipping `a/b', since it's on a different device +rm: skipping 'a/b', since it's on a different device EOF diff --git a/tests/rm/r-1 b/tests/rm/r-1 index 7d26280b6..97d0959c1 100755 --- a/tests/rm/r-1 +++ b/tests/rm/r-1 @@ -26,9 +26,9 @@ mkdir a a/a || framework_failure_ > b || framework_failure_ cat <<\EOF > $test.E || framework_failure_ -removed directory: `a/a' -removed directory: `a' -removed `b' +removed directory: 'a/a' +removed directory: 'a' +removed 'b' EOF rm --verbose -r a b > $test.O || fail=1 diff --git a/tests/rm/r-2 b/tests/rm/r-2 index 55c4807a0..0a588316b 100755 --- a/tests/rm/r-2 +++ b/tests/rm/r-2 @@ -26,10 +26,10 @@ mkdir t t/a t/a/b || framework_failure_ # FIXME: if this fails, it's a framework failure cat <<\EOF | sort > t/E || framework_failure_ -removed directory: `t/a' -removed directory: `t/a/b' -removed `t/a/b/g' -removed `t/a/f' +removed directory: 't/a' +removed directory: 't/a/b' +removed 't/a/b/g' +removed 't/a/f' EOF # Note that both the expected output (above) and the actual output lines diff --git a/tests/rm/readdir-bug b/tests/rm/readdir-bug index 591e91306..3835049ee 100755 --- a/tests/rm/readdir-bug +++ b/tests/rm/readdir-bug @@ -33,7 +33,7 @@ cd .. || framework_failure_ # On a buggy system, this would fail with the diagnostic, -# "cannot remove directory `b': Directory not empty" +# "cannot remove directory 'b': Directory not empty" rm -rf b || fail=1 test -d b && fail=1 diff --git a/tests/rm/rm1 b/tests/rm/rm1 index cde576adf..672f0f0a0 100755 --- a/tests/rm/rm1 +++ b/tests/rm/rm1 @@ -27,13 +27,13 @@ chmod u-w b/a || framework_failure_ # This should fail. rm -rf b > out 2>&1 && fail=1 cat <<\EOF > exp -rm: cannot remove directory `b/a/p': Permission denied +rm: cannot remove directory 'b/a/p': Permission denied EOF # On some systems, rm doesn't have enough information to # say it's a directory. cat <<\EOF > exp2 -rm: cannot remove `b/a/p': Permission denied +rm: cannot remove 'b/a/p': Permission denied EOF cmp out exp > /dev/null 2>&1 || { diff --git a/tests/rm/rm2 b/tests/rm/rm2 index b1477a3d4..7bbdfeaba 100755 --- a/tests/rm/rm2 +++ b/tests/rm/rm2 @@ -31,13 +31,13 @@ chmod u-x a/1 b || framework_failure_ # Both of these should fail. rm -rf a b > out 2>&1 && fail=1 cat <<\EOF > exp -rm: cannot remove `a/1': Permission denied -rm: cannot remove `b': Permission denied +rm: cannot remove 'a/1': Permission denied +rm: cannot remove 'b': Permission denied EOF cat <<\EOF > exp-solaris -rm: cannot remove `a/1/2': Permission denied -rm: cannot remove `b/3': Permission denied +rm: cannot remove 'a/1/2': Permission denied +rm: cannot remove 'b/3': Permission denied EOF cmp out exp > /dev/null 2>&1 \ diff --git a/tests/rm/rm3 b/tests/rm/rm3 index 17118d1fe..bf43f5e2d 100755 --- a/tests/rm/rm3 +++ b/tests/rm/rm3 @@ -46,8 +46,8 @@ EOF # Both of these should fail. rm -ir z < in > out 2>&1 || fail=1 -# Given input like `rm: ...? rm: ...? ' (no trailing newline), -# the `head...' part of the pipeline below removes the trailing space, so +# Given input like 'rm: ...? rm: ...? ' (no trailing newline), +# the 'head...' part of the pipeline below removes the trailing space, so # that sed doesn't have to deal with a line lacking a terminating newline. # This avoids a bug whereby some vendor-provided (Tru64) versions of sed # would mistakenly tack a newline onto the end of the output. diff --git a/tests/rm/rm4 b/tests/rm/rm4 index 09c3b8305..63d8029d0 100755 --- a/tests/rm/rm4 +++ b/tests/rm/rm4 @@ -1,5 +1,5 @@ #!/bin/sh -# ensure that `rm dir' fails without --recursive +# ensure that 'rm dir' fails without --recursive # Copyright (C) 2002, 2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/rm/rm5 b/tests/rm/rm5 index 947533433..2201ec469 100755 --- a/tests/rm/rm5 +++ b/tests/rm/rm5 @@ -28,16 +28,16 @@ y EOF cat <<\EOF > exp || framework_failure_ -rm: descend into directory `d' -rm: remove directory `d/e' -rm: remove directory `d' +rm: descend into directory 'd' +rm: remove directory 'd/e' +rm: remove directory 'd' EOF rm -ir d < in > out 2>&1 || fail=1 -# Given input like `rm: ...? rm: ...? ' (no trailing newline), -# the `head...' part of the pipeline below removes the trailing space, so +# Given input like 'rm: ...? rm: ...? ' (no trailing newline), +# the 'head...' part of the pipeline below removes the trailing space, so # that sed doesn't have to deal with a line lacking a terminating newline. # This avoids a bug whereby some vendor-provided (Tru64) versions of sed # would mistakenly tack a newline onto the end of the output. diff --git a/tests/rm/sunos-1 b/tests/rm/sunos-1 index a6bf9ab97..8f1e74605 100755 --- a/tests/rm/sunos-1 +++ b/tests/rm/sunos-1 @@ -20,7 +20,7 @@ # On SunOS 4.1.3, running rm -r '' in a nonempty directory may # actually remove files with names of entries in the current directory -# but relative to `/' rather than relative to the current directory. +# but relative to '/' rather than relative to the current directory. . "${srcdir=.}/init.sh"; path_prepend_ ../src print_ver_ rm diff --git a/tests/rm/unread2 b/tests/rm/unread2 index 9b352d460..46fc98cd8 100755 --- a/tests/rm/unread2 +++ b/tests/rm/unread2 @@ -27,7 +27,7 @@ chmod u-r a # This should fail. rm -rf a > out 2>&1 && fail=1 cat <<\EOF > exp -rm: cannot remove `a': Permission denied +rm: cannot remove 'a': Permission denied EOF compare exp out || fail=1 diff --git a/tests/rm/v-slash b/tests/rm/v-slash index 113a19ae3..2fae859b2 100755 --- a/tests/rm/v-slash +++ b/tests/rm/v-slash @@ -25,8 +25,8 @@ touch a/x || framework_failure_ rm --verbose -r a/// > out || fail=1 cat <<\EOF > exp || fail=1 -removed `a/x' -removed directory: `a' +removed 'a/x' +removed directory: 'a' EOF compare exp out || fail=1 diff --git a/tests/rmdir/fail-perm b/tests/rmdir/fail-perm index ae6f9abbc..7deba62ea 100755 --- a/tests/rmdir/fail-perm +++ b/tests/rmdir/fail-perm @@ -1,5 +1,5 @@ #!/bin/sh -# For unwritable directory `d', `rmdir -p d d/e/f' would emit +# For unwritable directory 'd', 'rmdir -p d d/e/f' would emit # diagnostics but would not fail. Fixed in 5.1.2. # Copyright (C) 2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/rmdir/t-slash b/tests/rmdir/t-slash index 94b6e2ed4..8c7052fac 100755 --- a/tests/rmdir/t-slash +++ b/tests/rmdir/t-slash @@ -23,7 +23,7 @@ mkdir dir || framework_failure_ # Prior to coreutils-4.5.2, this would fail with the following: -# rmdir: `dir': No such file or directory +# rmdir: 'dir': No such file or directory rmdir -p dir/ || fail=1 Exit $fail diff --git a/tests/shell-or-perl b/tests/shell-or-perl index 96a5f8c33..58c80e360 100644 --- a/tests/shell-or-perl +++ b/tests/shell-or-perl @@ -1,7 +1,7 @@ #! /bin/sh # Run a test script of the coreutils test scripts, picking up the right # interpreter (i.e., perl or the shell) and the right flags for it (e.g., -# perl `-T' flag for perl scripts that must run in tainted mode). +# perl '-T' flag for perl scripts that must run in tainted mode). # # Copyright (C) 2011-2012 Free Software Foundation, Inc. # @@ -31,7 +31,7 @@ me=shell-or-perl fatal_ () { echo "$me: $*" >&2 - # Exit with status `99' to inform the testsuite harness that an + # Exit with status '99' to inform the testsuite harness that an # hard error occurred. exit 99 } diff --git a/tests/tail-2/F-vs-missing b/tests/tail-2/F-vs-missing index 194b55943..fbdb53314 100755 --- a/tests/tail-2/F-vs-missing +++ b/tests/tail-2/F-vs-missing @@ -33,14 +33,14 @@ check_tail_output() } # Wait up to 6.3s for tail to start with diagnostic: -# tail: cannot open `missing/file' for reading: No such file or directory +# tail: cannot open 'missing/file' for reading: No such file or directory tail_re='cannot open' retry_delay_ check_tail_output .1 7 || fail=1 mkdir missing || fail=1 (cd missing && echo x > file) # Wait up to 6.3s for this to appear in the output: -# "tail: `...' has appeared; following end of new file" +# "tail: '...' has appeared; following end of new file" tail_re='has appeared' retry_delay_ check_tail_output .1 7 || { echo "$0: file: unexpected delay?"; cat out; fail=1; } diff --git a/tests/tail-2/F-vs-rename b/tests/tail-2/F-vs-rename index 7967296a2..53bc00dd3 100755 --- a/tests/tail-2/F-vs-rename +++ b/tests/tail-2/F-vs-rename @@ -41,12 +41,12 @@ tail_re='^x$' retry_delay_ check_tail_output .1 7 || fail=1 mv a b || fail=1 # Wait 6.3s for this diagnostic: -# tail: `a' has become inaccessible: No such file or directory +# tail: 'a' has become inaccessible: No such file or directory tail_re='inaccessible' retry_delay_ check_tail_output .1 7 || fail=1 echo x > a # Wait up to 6.3s for this to appear in the output: -# "tail: `...' has appeared; following end of new file" +# "tail: '...' has appeared; following end of new file" tail_re='has appeared' retry_delay_ check_tail_output .1 7 || { echo "$0: a: unexpected delay?"; cat out; fail=1; } diff --git a/tests/tail-2/assert b/tests/tail-2/assert index 9632b104f..c34f90d77 100755 --- a/tests/tail-2/assert +++ b/tests/tail-2/assert @@ -19,7 +19,7 @@ # This test fails with tail from textutils-2.0. # It would get something like this: -# tail: tail.c:718: recheck: Assertion `valid_file_spec (f)' failed. +# tail: tail.c:718: recheck: Assertion 'valid_file_spec (f)' failed. # Aborted # due to a race condition in which a dev/inode pair is reused. @@ -39,8 +39,8 @@ tail_pid=$! echo sleeping for 7 seconds... -# Give the backgrounded `tail' a chance to start before removing foo. -# Otherwise, without --retry, tail wouldn't try to open `foo' again. +# Give the backgrounded 'tail' a chance to start before removing foo. +# Otherwise, without --retry, tail wouldn't try to open 'foo' again. sleep 1 rm -f foo diff --git a/tests/tail-2/assert-2 b/tests/tail-2/assert-2 index 25ddb8b20..b8f099d5f 100755 --- a/tests/tail-2/assert-2 +++ b/tests/tail-2/assert-2 @@ -1,6 +1,6 @@ #!/bin/sh -# This variant of `assert' would get a UMR reliably in 2.0.9. -# Due to a race condition in the test, the `assert' script would get +# This variant of 'assert' would get a UMR reliably in 2.0.9. +# Due to a race condition in the test, the 'assert' script would get # the UMR on Solaris only some of the time, and not at all on Linux/GNU. # Copyright (C) 2000, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/tail-2/big-4gb b/tests/tail-2/big-4gb index 3bd53039e..171dd1bd7 100755 --- a/tests/tail-2/big-4gb +++ b/tests/tail-2/big-4gb @@ -1,5 +1,5 @@ #!/bin/sh -# Demonstrate a bug in `tail -cN' when operating on files of size 4G and larger +# Demonstrate a bug in 'tail -cN' when operating on files of size 4G and larger # Fixed in coreutils-4.5.2. # Copyright (C) 2002-2003, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/tail-2/follow-name b/tests/tail-2/follow-name index a615d799d..2ab1c0119 100755 --- a/tests/tail-2/follow-name +++ b/tests/tail-2/follow-name @@ -20,7 +20,7 @@ print_ver_ tail cat <<\EOF > exp || framework_failure_ -tail: cannot open `no-such' for reading: No such file or directory +tail: cannot open 'no-such' for reading: No such file or directory tail: no files remaining EOF diff --git a/tests/tail-2/inotify-hash-abuse b/tests/tail-2/inotify-hash-abuse index ee3a2a571..deec76d1b 100755 --- a/tests/tail-2/inotify-hash-abuse +++ b/tests/tail-2/inotify-hash-abuse @@ -41,14 +41,14 @@ tail_re='^x$' retry_delay_ check_tail_output .1 7 || fail=1 mv 1 f || fail=1 # Wait 6.3s for this diagnostic: -# tail: `1' has become inaccessible: No such file or directory +# tail: '1' has become inaccessible: No such file or directory tail_re='inaccessible' retry_delay_ check_tail_output .1 7 || fail=1 # Trigger the bug. Before the fix, this would provoke the abort. echo a > 1 || fail=1 # Wait up to 2s for the buggy tail to die, -# or for the "tail: `1' has appeared; following end of new file" output +# or for the "tail: '1' has appeared; following end of new file" output for i in $(seq 10); do kill -0 $pid || break grep 'has appeared;' out > /dev/null && break diff --git a/tests/tail-2/proc-ksyms b/tests/tail-2/proc-ksyms index f4d8e8c27..e3577a85a 100755 --- a/tests/tail-2/proc-ksyms +++ b/tests/tail-2/proc-ksyms @@ -1,5 +1,5 @@ #!/bin/sh -# Prior to textutils-2.0.17, `tail /proc/ksyms' would segfault on Linux. +# Prior to textutils-2.0.17, 'tail /proc/ksyms' would segfault on Linux. # Copyright (C) 2001, 2004, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/tail-2/tail-n0f b/tests/tail-2/tail-n0f index f5c2ec591..29448d986 100755 --- a/tests/tail-2/tail-n0f +++ b/tests/tail-2/tail-n0f @@ -1,5 +1,5 @@ #!/bin/sh -# Make sure that `tail -n0 -f' and `tail -c0 -f' sleep +# Make sure that 'tail -n0 -f' and 'tail -c0 -f' sleep # rather than doing what amounted to a busy-wait. # Copyright (C) 2003, 2006-2012 Free Software Foundation, Inc. diff --git a/tests/tail-2/wait b/tests/tail-2/wait index 2b051fc6b..24764bd06 100755 --- a/tests/tail-2/wait +++ b/tests/tail-2/wait @@ -1,6 +1,6 @@ #!/bin/sh -# Make sure that `tail -f' returns immediately if a file doesn't exist -# while `tail -F' waits for it to appear. +# Make sure that 'tail -f' returns immediately if a file doesn't exist +# while 'tail -F' waits for it to appear. # Copyright (C) 2003, 2006-2012 Free Software Foundation, Inc. @@ -36,7 +36,7 @@ for inotify in ---disable-inotify ''; do timeout 1 tail -s0.1 -f $inotify here 2>tail.err test $? = 124 || fail=1 - # `tail -F' must wait in any case. + # 'tail -F' must wait in any case. timeout 1 tail -s0.1 -F $inotify here 2>>tail.err test $? = 124 || fail=1 diff --git a/tests/touch/60-seconds b/tests/touch/60-seconds index 09c96091f..915a1d05d 100755 --- a/tests/touch/60-seconds +++ b/tests/touch/60-seconds @@ -23,7 +23,7 @@ echo 60.000000000 > exp || framework_failure_ # Before coreutils-7.7, this would fail, complaining of -# an `invalid date format'. Specifying 60 seconds *is* valid. +# an 'invalid date format'. Specifying 60 seconds *is* valid. TZ=UTC0 touch -t 197001010000.60 f || fail=1 stat --p='%.9Y\n' f > out || fail=1 diff --git a/tests/touch/empty-file b/tests/touch/empty-file index 1431fb52d..2d4f4e98e 100755 --- a/tests/touch/empty-file +++ b/tests/touch/empty-file @@ -18,7 +18,7 @@ # Volker Borchert reported that touch 3.16r (and presumably all before that) -# fails to work on SunOS 4.1.3 with `most of the recommended patches' when +# fails to work on SunOS 4.1.3 with 'most of the recommended patches' when # the empty file is on an NFS-mounted 4.2 volume. . "${srcdir=.}/init.sh"; path_prepend_ ../src diff --git a/tests/touch/not-owner b/tests/touch/not-owner index 3aba5f0a0..63b8af249 100755 --- a/tests/touch/not-owner +++ b/tests/touch/not-owner @@ -32,14 +32,14 @@ skip_if_root_ # Before fileutils-4.1, we'd get the following misleading -# diagnostic instead of `...: Permission denied'. -# touch: creating `/': Is a directory +# diagnostic instead of '...: Permission denied'. +# touch: creating '/': Is a directory touch / > out 2>&1 && fail=1 -# On SunOS4, EPERM is `Not owner'. -# On some *BSD systems it's `Operation not permitted'. +# On SunOS4, EPERM is 'Not owner'. +# On some *BSD systems it's 'Operation not permitted'. # On a system where root file system is mounted read-only -# it's `Read-only file system'. +# it's 'Read-only file system'. for msg in 'Not owner' 'Operation not permitted' 'Permission denied' \ 'Read-only file system'; do cat > exp <<EOF |