tests: factor out expensive "pairs" code of misc/stty

* tests/Makefile.am (TESTS): Add misc/stty-pairs.
* tests/init.cfg (stty_reversible_init_): New function.
(stty_reversible_query_): New function.
* tests/misc/stty: Factor out expensive "pairs" code into new test.
Use new stty_reversible_* functions instead of evaluating static
REV_* variables.
* tests/misc/stty-pairs: Add new test.  Code added from misc/stty.
Mark this as an expensive test.  Skip 'parenb' and 'cread' options,
as these tests are known to fail.  Like in misc/stty, also use
the new stty_reversible_* functions.

2 files changed, 66 insertions, 39 deletions

diff --git a/tests/misc/stty b/tests/misc/stty
index cfc70c153..ae6565649 100755
--- a/tests/misc/stty
+++ b/tests/misc/stty
@@ -23,20 +23,8 @@ print_ver_ stty
 require_controlling_input_terminal_
 trap '' TTOU # Ignore SIGTTOU
 
-# The following list of reversible options was generated with
-# grep -w REV stty.c|sed -n '/^  {"/{s//REV_/;s/".*/=1/;p;}'|fmt
-REV_parenb=1 REV_parodd=1 REV_hupcl=1 REV_hup=1 REV_cstopb=1 REV_cread=1
-REV_clocal=1 REV_crtscts=1 REV_ignbrk=1 REV_brkint=1 REV_ignpar=1
-REV_parmrk=1 REV_inpck=1 REV_istrip=1 REV_inlcr=1 REV_igncr=1 REV_icrnl=1
-REV_ixon=1 REV_ixoff=1 REV_tandem=1 REV_iuclc=1 REV_ixany=1 REV_imaxbel=1
-REV_iutf8=1 REV_opost=1 REV_olcuc=1 REV_ocrnl=1 REV_onlcr=1 REV_onocr=1
-REV_onlret=1 REV_ofill=1 REV_ofdel=1 REV_isig=1 REV_icanon=1 REV_iexten=1
-REV_echo=1 REV_echoe=1 REV_crterase=1 REV_echok=1 REV_echonl=1
-REV_noflsh=1 REV_xcase=1 REV_tostop=1 REV_echoprt=1 REV_prterase=1
-REV_echoctl=1 REV_ctlecho=1 REV_echoke=1 REV_crtkill=1 REV_evenp=1
-REV_parity=1 REV_oddp=1 REV_nl=1 REV_cooked=1 REV_raw=1 REV_pass8=1
-REV_litout=1 REV_cbreak=1 REV_decctlq=1 REV_tabs=1 REV_lcase=1 REV_LCASE=1
-
+# Get the reversible settings from stty.c.
+stty_reversible_init_
 
 saved_state=.saved-state
 stty --save > $saved_state || fail=1
@@ -70,35 +58,11 @@ for opt in $options; do
 
   # Likewise, 'stty -cread' would fail, so skip that, too.
   test $opt = cread && continue
-  eval rev=\$REV_$opt
-  if test -n "$rev"; then
+  if stty_reversible_query_ "$opt" ; then
     stty -$opt || { fail=1; echo -$opt; }
   fi
 done
 
-if test -n "$RUN_LONG_TESTS"; then
-  # Take them in pairs.
-  for opt1 in $options; do
-    echo .|tr -d '\n'
-    for opt2 in $options; do
-
-      stty $opt1 $opt2 || fail=1
-
-      eval rev1=\$REV_$opt1
-      eval rev2=\$REV_$opt2
-      if test -n "$rev1"; then
-        stty -$opt1 $opt2 || fail=1
-      fi
-      if test -n "$rev2"; then
-        stty $opt1 -$opt2 || fail=1
-      fi
-      if test "$rev1$rev2" = 11; then
-        stty -$opt1 -$opt2 || fail=1
-      fi
-    done
-  done
-fi
-
 stty $(cat $saved_state)
 
 Exit $fail
diff --git a/tests/misc/stty-pairs b/tests/misc/stty-pairs
new file mode 100755
index 000000000..e59da0435
--- /dev/null
+++ b/tests/misc/stty-pairs
@@ -0,0 +1,63 @@
+#!/bin/sh
+# Make sure stty can parse most of its options - in pairs [expensive].
+
+# Copyright (C) 1998-2012 Free Software Foundation, Inc.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+. "${srcdir=.}/init.sh"; path_prepend_ ../src
+print_ver_ stty
+
+expensive_
+
+# Make sure there's a tty on stdin.
+require_controlling_input_terminal_
+trap '' TTOU # Ignore SIGTTOU
+
+# Get the reversible settings from stty.c.
+stty_reversible_init_
+
+saved_state=.saved-state
+stty --save > $saved_state || fail=1
+stty $(cat $saved_state) || fail=1
+
+# Build a list of all boolean options stty accepts on this system.
+# Don't depend on terminal width.  Put each option on its own line,
+# remove all non-boolean ones, remove 'parenb' and 'cread' explicitly,
+# then remove any leading hyphens.
+sed_del='/^speed/d;/^rows/d;/^columns/d;/ = /d;s/parenb//;s/cread//'
+options=$(stty -a | tr -s ';' '\n' | sed "s/^ //;$sed_del;s/-//g")
+
+# Take them in pairs, with and without the leading '-'.
+for opt1 in $options; do
+  for opt2 in $options; do
+
+    stty $opt1 $opt2 || fail=1
+
+    if stty_reversible_query_ "$opt1" ; then
+      stty -$opt1 $opt2 || fail=1
+    fi
+    if stty_reversible_query_ "$opt2" ; then
+      stty $opt1 -$opt2 || fail=1
+    fi
+    if stty_reversible_query_ "$opt1" \
+        && stty_reversible_query_ "$opt2" ; then
+      stty -$opt1 -$opt2 || fail=1
+    fi
+  done
+done
+
+stty $(cat $saved_state)
+
+Exit $fail