revert to previous version

1 files changed, 316 insertions, 554 deletions

diff --git a/doc/texinfo.tex b/doc/texinfo.tex
index d005d78e2..abd295df0 100644
--- a/doc/texinfo.tex
+++ b/doc/texinfo.tex
@@ -1,8 +1,7 @@
-%% TeX macros to handle Texinfo files.
-%% $Id: texinfo.tex,v 1.13 1997/07/11 15:27:19 meyering Exp $
+%% TeX macros to handle texinfo files
 
 %  Copyright (C) 1985, 86, 88, 90, 91, 92, 93,
-%                94, 95, 96, 97 Free Software Foundation, Inc.
+%                94, 95, 1996 Free Software Foundation, Inc.
 
 %This texinfo.tex file is free software; you can redistribute it and/or
 %modify it under the terms of the GNU General Public License as
@@ -36,7 +35,7 @@
 
 % This automatically updates the version number based on RCS.
 \def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
-\deftexinfoversion$Revision: 1.13 $
+\deftexinfoversion$Revision: 1.14 $
 \message{Loading texinfo package [Version \texinfoversion]:}
 
 % If in a .fmt file, print the version number
@@ -60,6 +59,7 @@
 \let\ptexrbrace=\}
 \let\ptexstar=\*
 \let\ptext=\t
+\let\ptextilde=\~
 
 % Be sure we're in horizontal mode when doing a tie, since we make space
 % equivalent to this in @example-like environments. Otherwise, a space
@@ -72,6 +72,7 @@
  \global\let\tiepenalty = \@M
  \gdef\tie{\leavevmode\penalty\tiepenalty\ }
 }
+\let\~ = \tie                  % And make it available as @~.
 
 
 \message{Basics,}
@@ -101,11 +102,10 @@
 \hyphenation{ap-pen-dix}
 \hyphenation{mini-buf-fer mini-buf-fers}
 \hyphenation{eshell}
-\hyphenation{white-space}
 
 % Margin to add to right of even pages, to left of odd pages.
-\newdimen \bindingoffset
-\newdimen \normaloffset
+\newdimen \bindingoffset  
+\newdimen \normaloffset   
 \newdimen\pagewidth \newdimen\pageheight
 
 % Sometimes it is convenient to have everything in the transcript file
@@ -119,101 +119,81 @@
    \showboxbreadth\maxdimen\showboxdepth\maxdimen
 }%
 
-% For @cropmarks command.
-% Do @cropmarks to get crop marks.
-% 
-\newif\ifcropmarks
-\let\cropmarks = \cropmarkstrue
+%---------------------Begin change-----------------------
 %
-% Dimensions to add cropmarks at corners.
-% Added by P. A. MacKay, 12 Nov. 1986
+%%%% For @cropmarks command.
+% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986
 %
 \newdimen\cornerlong \newdimen\cornerthick
-\newdimen\topandbottommargin
-\newdimen\outerhsize \newdimen\outervsize
+\newdimen \topandbottommargin
+\newdimen \outerhsize \newdimen \outervsize
 \cornerlong=1pc\cornerthick=.3pt        % These set size of cropmarks
 \outerhsize=7in
 %\outervsize=9.5in
 % Alternative @smallbook page size is 9.25in
 \outervsize=9.25in
 \topandbottommargin=.75in
-
-% Main output routine.
-\chardef\PAGE = 255
-\output = {\onepageout{\pagecontents\PAGE}}
-
-\newbox\headlinebox
-\newbox\footlinebox
+%
+%---------------------End change-----------------------
 
 % \onepageout takes a vbox as an argument.  Note that \pagecontents
 % does insertions, but you have to call it yourself.
+\chardef\PAGE=255  \output={\onepageout{\pagecontents\PAGE}}
 \def\onepageout#1{%
-  \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
-  %
+  \hoffset=\normaloffset
   \ifodd\pageno  \advance\hoffset by \bindingoffset
   \else \advance\hoffset by -\bindingoffset\fi
-  %
-  % Do this outside of the \shipout so @code etc. will be expanded in
-  % the headline as they should be, not taken literally (outputting ''code).
-  \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
-  \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
-  %
   {%
-    % Have to do this stuff outside the \shipout because we want it to
-    % take effect in \write's, yet the group defined by the \vbox ends
-    % before the \shipout runs.
-    %
-    \escapechar = `\\     % use backslash in output files.
-    \indexdummies         % don't expand commands in the output.
-    \normalturnoffactive  % \ in index entries must not stay \, e.g., if
-                   % the page break happens to be in the middle of an example.
+    \escapechar = `\\ % use backslash in output files.
+    \indexdummies
     \shipout\vbox{%
-      \ifcropmarks \vbox to \outervsize\bgroup
-        \hsize = \outerhsize
-        \line{\ewtop\hfil\ewtop}%
-        \nointerlineskip
-        \line{%
-          \vbox{\moveleft\cornerthick\nstop}%
-          \hfill
-          \vbox{\moveright\cornerthick\nstop}%
-        }%
-        \vskip\topandbottommargin
-        \line\bgroup
-          \hfil % center the page within the outer (page) hsize.
-          \ifodd\pageno\hskip\bindingoffset\fi
-          \vbox\bgroup
-      \fi
-      %
-      \unvbox\headlinebox
+      {\let\hsize=\pagewidth \makeheadline}%
       \pagebody{#1}%
-      \ifdim\ht\footlinebox > 0pt
-        % Only leave this space if the footline is nonempty.
-        % (We lessened \vsize for it in \oddfootingxxx.)
-        % The \baselineskip=24pt in plain's \makefootline has no effect.
-        \vskip 2\baselineskip
-        \unvbox\footlinebox
-      \fi
-      %
-      \ifcropmarks
-          \egroup % end of \vbox\bgroup
-        \hfil\egroup % end of (centering) \line\bgroup
-        \vskip\topandbottommargin plus1fill minus1fill
-        \boxmaxdepth = \cornerthick
-        \line{%
-          \vbox{\moveleft\cornerthick\nsbot}%
-          \hfill
-          \vbox{\moveright\cornerthick\nsbot}%
-        }%
-        \nointerlineskip
-        \line{\ewbot\hfil\ewbot}%
-      \egroup % \vbox from first cropmarks clause
-      \fi
-    }% end of \shipout\vbox
-  }% end of group with \turnoffactive
+      {\let\hsize=\pagewidth \makefootline}%
+    }%
+  }%
   \advancepageno
   \ifnum\outputpenalty>-20000 \else\dosupereject\fi
 }
 
+%%%% For @cropmarks command %%%%
+
+% Here is a modification of the main output routine for Near East Publications
+% This provides right-angle cropmarks at all four corners.
+% The contents of the page are centerlined into the cropmarks,
+% and any desired binding offset is added as an \hskip on either
+% site of the centerlined box.  (P. A. MacKay, 12 November, 1986)
+%
+\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up
+{\escapechar=`\\\relax % makes sure backslash is used in output files.
+                 \shipout
+                 \vbox to \outervsize{\hsize=\outerhsize
+                 \vbox{\line{\ewtop\hfill\ewtop}}
+                 \nointerlineskip
+                 \line{\vbox{\moveleft\cornerthick\nstop}
+                       \hfill
+                       \vbox{\moveright\cornerthick\nstop}}
+                 \vskip \topandbottommargin
+                 \centerline{\ifodd\pageno\hskip\bindingoffset\fi
+                        \vbox{
+                        {\let\hsize=\pagewidth \makeheadline}
+                        \pagebody{#1}
+                        {\let\hsize=\pagewidth \makefootline}}
+                        \ifodd\pageno\else\hskip\bindingoffset\fi}
+                 \vskip \topandbottommargin plus1fill minus1fill
+                 \boxmaxdepth\cornerthick
+                 \line{\vbox{\moveleft\cornerthick\nsbot}
+                       \hfill
+                       \vbox{\moveright\cornerthick\nsbot}}
+                 \nointerlineskip
+                 \vbox{\line{\ewbot\hfill\ewbot}}
+        }}
+  \advancepageno
+  \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
+%
+% Do @cropmarks to get crop marks
+\def\cropmarks{\let\onepageout=\croppageout }
+
 \newinsert\margin \dimen\margin=\maxdimen
 
 \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
@@ -227,6 +207,7 @@
 \ifr@ggedbottom \kern-\dimen@ \vfil \fi}
 }
 
+%
 % Here are the rules for the cropmarks.  Note that they are
 % offset so that the space between them is truly \outerhsize or \outervsize
 % (P. A. MacKay, 12 November, 1986)
@@ -736,11 +717,10 @@ where each line of input produces a line of output.}
 %
 \def\ignore{\doignore{ignore}}
 
-% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
+% Also ignore @ifinfo, @ifhtml, @html, @menu, and @direntry text.
 %
 \def\ifinfo{\doignore{ifinfo}}
 \def\ifhtml{\doignore{ifhtml}}
-\def\ifnottex{\doignore{ifnottex}}
 \def\html{\doignore{html}}
 \def\menu{\doignore{menu}}
 \def\direntry{\doignore{direntry}}
@@ -767,10 +747,6 @@ where each line of input produces a line of output.}
   % Make sure that spaces turn into tokens that match what \doignoretext wants.
   \catcode32 = 10
   %
-  % Ignore braces, too, so mismatched braces don't cause trouble.
-  \catcode`\{ = 9
-  \catcode`\} = 9
-  %
   % And now expand that command.
   \doignoretext
 }
@@ -862,7 +838,7 @@ where each line of input produces a line of output.}
     \pretolerance = 10000
     %
     % Do not execute instructions in @tex
-    \def\tex{\doignore{tex}}%
+    \def\tex{\doignore{tex}}
 }
 
 % @set VAR sets the variable VAR to an empty value.
@@ -874,9 +850,7 @@ where each line of input produces a line of output.}
 % didn't need it.  Make sure the catcode of space is correct to avoid
 % losing inside @example, for instance.
 %
-\def\set{\begingroup\catcode` =10
-  \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
-  \parsearg\setxxx}
+\def\set{\begingroup\catcode` =10 \parsearg\setxxx}
 \def\setxxx#1{\setyyy#1 \endsetyyy}
 \def\setyyy#1 #2\endsetyyy{%
   \def\temp{#2}%
@@ -897,16 +871,10 @@ where each line of input produces a line of output.}
 
 % @value{foo} gets the text saved in variable foo.
 %
-\def\value{\begingroup
-  \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
-  \valuexxx}
-\def\valuexxx#1{%
-  \expandafter\ifx\csname SET#1\endcsname\relax
-    {\{No value for ``#1''\}}%
-  \else
-    \csname SET#1\endcsname
-  \fi
-\endgroup}
+\def\value#1{\expandafter
+                \ifx\csname SET#1\endcsname\relax
+                        {\{No value for ``#1''\}}
+                \else \csname SET#1\endcsname \fi}
 
 % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
 % with @set.
@@ -938,16 +906,11 @@ where each line of input produces a line of output.}
 \def\ifclearfail{\nestedignore{ifclear}}
 \defineunmatchedend{ifclear}
 
-% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
-% following, through the first @end iftex (etc.).  Make `@end iftex'
-% (etc.) valid only after an @iftex.
+% @iftex always succeeds; we read the text following, through @end
+% iftex).  But `@end iftex' should be valid only after an @iftex.
 %
 \def\iftex{\conditionalsucceed{iftex}}
-\def\ifnothtml{\conditionalsucceed{ifnothtml}}
-\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
 \defineunmatchedend{iftex}
-\defineunmatchedend{ifnothtml}
-\defineunmatchedend{ifnotinfo}
 
 % We can't just want to start a group at @iftex (for example) and end it
 % at @end iftex, since then @set commands inside the conditional have no
@@ -1023,15 +986,6 @@ where each line of input produces a line of output.}
    \openindices
    \fixbackslash  % Turn off hack to swallow `\input texinfo'.
    \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
-   %
-   % If texinfo.cnf is present on the system, read it.
-   % Useful for site-wide @afourpaper, etc.
-   % Just to be on the safe side, close the input stream before the \input.
-   \openin 1 texinfo.cnf
-   \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
-   \closein1
-   \temp
-   %
    \comment % Ignore the actual filename.
 }
 
@@ -1067,9 +1021,8 @@ where each line of input produces a line of output.}
 % We don't need math for this one.
 \def\ttsl{\tenttsl}
 
-% Use Computer Modern fonts at \magstephalf (11pt).
-\newcount\mainmagstep
-\mainmagstep=\magstephalf
+%% Try out Computer Modern fonts at \magstephalf
+\let\mainmagstep=\magstephalf
 
 % Set the font macro #1 to the font named #2, adding on the
 % specified font prefix (normally `cm').
@@ -1141,26 +1094,13 @@ where each line of input produces a line of output.}
 \font\indi=cmmi9
 \font\indsy=cmsy9
 
-% Fonts for title page:
-\setfont\titlerm\rmbshape{12}{\magstep3}
-\setfont\titleit\itbshape{10}{\magstep4}
-\setfont\titlesl\slbshape{10}{\magstep4}
-\setfont\titlett\ttbshape{12}{\magstep3}
-\setfont\titlettsl\ttslshape{10}{\magstep4}
-\setfont\titlesf\sfbshape{17}{\magstep1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\let\authorrm = \secrm
-
 % Chapter (and unnumbered) fonts (17.28pt).
 \setfont\chaprm\rmbshape{12}{\magstep2}
 \setfont\chapit\itbshape{10}{\magstep3}
 \setfont\chapsl\slbshape{10}{\magstep3}
 \setfont\chaptt\ttbshape{12}{\magstep2}
 \setfont\chapttsl\ttslshape{10}{\magstep3}
-\setfont\chapsf\sfbshape{17}{1000}
+\setfont\chapsf\sfbshape{12}{\magstep2}
 \let\chapbf=\chaprm
 \setfont\chapsc\scbshape{10}{\magstep3}
 \font\chapi=cmmi12 scaled \magstep2
@@ -1197,15 +1137,19 @@ where each line of input produces a line of output.}
 \setfont\ssecit\itbshape{10}{1315}
 \setfont\ssecsl\slbshape{10}{1315}
 \setfont\ssectt\ttbshape{12}{\magstephalf}
-\setfont\ssecttsl\ttslshape{10}{1315}
+\setfont\ssecttsl\ttslshape{10}{\magstep1}
 \setfont\ssecsf\sfbshape{12}{\magstephalf}
 \let\ssecbf\ssecrm
 \setfont\ssecsc\scbshape{10}{\magstep1}
 \font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled 1315
+\font\ssecsy=cmsy10 scaled \magstep1
 % The smallcaps and symbol fonts should actually be scaled \magstep1.5,
 % but that is not a standard magnification.
 
+% Fonts for title page:
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\let\authorrm = \secrm
+
 % In order for the font changes to affect most math symbols and letters,
 % we have to define the \textfont of the standard families.  Since
 % texinfo doesn't allow for producing subscripts and superscripts, we
@@ -1230,12 +1174,6 @@ where each line of input produces a line of output.}
   \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
   \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
   \resetmathfonts}
-\def\titlefonts{%
-  \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
-  \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
-  \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
-  \let\tenttsl=\titlettsl
-  \resetmathfonts \setleading{25pt}}
 \def\chapfonts{%
   \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
   \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
@@ -1313,6 +1251,8 @@ where each line of input produces a line of output.}
 \def\ctrl #1{{\tt \rawbackslash \hat}#1}
 
 \let\file=\samp
+\let\url=\samp % perhaps include a hypertex \special eventually
+\def\email#1{$\langle${\tt #1}$\rangle$}
 
 % @code is a modification of @t,
 % which makes spaces the same size as normal in the surrounding text.
@@ -1349,82 +1289,36 @@ where each line of input produces a line of output.}
 {
 \catcode`\-=\active
 \catcode`\_=\active
-\catcode`\|=\active
 \global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex}
 % The following is used by \doprintindex to insure that long function names
 % wrap around.  It is necessary for - and _ to be active before the index is
 % read from the file, as \entry parses the arguments long before \code is
 % ever called.  -- mycroft
-% _ is always active; and it shouldn't be \let = to an _ that is a
-% subscript character anyway. Then, @cindex @samp{_} (for example)
-% fails.  --karl
-\global\def\indexbreaks{%
-  \catcode`\-=\active \let-\realdash
-}
+\global\def\indexbreaks{\catcode`\-=\active \let-\realdash \catcode`\_=\active \let_\realunder}
 }
 
 \def\realdash{-}
+\def\realunder{_}
 \def\codedash{-\discretionary{}{}{}}
-\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}}
+\def\codeunder{\normalunderscore\discretionary{}{}{}}
 \def\codex #1{\tclose{#1}\endgroup}
 
 %\let\exp=\tclose  %Was temporary
 
 % @kbd is like @code, except that if the argument is just one @key command,
 % then @kbd has no effect.
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-%   `example' (@kbd uses ttsl only inside of @example and friends),
-%   or `code' (@kbd uses normal tty font always).
-\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
-\def\kbdinputstylexxx#1{%
-  \def\arg{#1}%
-  \ifx\arg\worddistinct
-    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
-  \else\ifx\arg\wordexample
-    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
-  \else\ifx\arg\wordcode
-    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
-  \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is kbdinputdistinct.  (Too much of a hassle to call the macro,
-% the catcodes are wrong for parsearg to work.)
-\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}
-
+%
 \def\xkey{\key}
 \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
 \ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\look}}\fi
-\else{\tclose{\kbdfont\look}}\fi}
-
-% @url, @email.  Quotes do not seem necessary.
-\let\url=\code % perhaps include a hypertex \special eventually
-% rms does not like the angle brackets --karl, 17may97.
-%\def\email#1{$\langle${\tt #1}$\rangle$}
-\let\email=\code
-
-% @uref (abbreviation for `urlref') takes an optional second argument
-% specifying the text to display.  First (mandatory) arg is the url.
-% 
-\def\uref#1{\urefxxx #1,,\finish}
-\def\urefxxx#1,#2,#3\finish{%
-  \setbox0 = \hbox{\ignorespaces #2}%
-  \ifdim\wd0 > 0pt
-    \unhbox0\ (\code{#1})%
-  \else
-    \code{#1}%
-  \fi
-}
+\else{\tclose{\ttsl\look}}\fi
+\else{\tclose{\ttsl\look}}\fi}
 
 % Check if we are currently using a typewriter font.  Since all the
 % Computer Modern typewriter fonts have zero interword stretch (and
 % shrink), and it is reasonable to expect all typewriter fonts to have
 % this property, we can check that font parameter.
-%
+% 
 \def\ifmonospace{\ifdim\fontdimen3\font=0pt }
 
 % Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
@@ -1455,6 +1349,8 @@ where each line of input produces a line of output.}
 \newskip\titlepagebottomglue \titlepagebottomglue = 2pc
 
 % First the title page.  Must do @settitle before @titlepage.
+\def\titlefont#1{{\titlerm #1}}
+
 \newif\ifseenauthor
 \newif\iffinishedtitlepage
 
@@ -1476,7 +1372,7 @@ where each line of input produces a line of output.}
    %
    % Now you can print the title using @title.
    \def\title{\parsearg\titlezzz}%
-   \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
+   \def\titlezzz##1{\leftline{\titlefont{##1}}
                     % print a rule at the page bottom also.
                     \finishedtitlepagefalse
                     \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
@@ -1565,7 +1461,10 @@ where each line of input produces a line of output.}
 \gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
 \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
 
-\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+\gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish}
+\gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{%
+\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
+\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
 
 \gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
 \gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
@@ -1573,15 +1472,12 @@ where each line of input produces a line of output.}
 
 \gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
 \gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
-  \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
-  %
-  % Leave some space for the footline.  Hopefully ok to assume
-  % @evenfooting will not be used by itself.
-  \global\advance\pageheight by -\baselineskip
-  \global\advance\vsize by -\baselineskip
-}
+\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
 
-\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+\gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish}
+\gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{%
+\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
+\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
 %
 }% unbind the catcode of @.
 
@@ -1965,7 +1861,7 @@ July\or August\or September\or October\or November\or December\fi
 \def\itemizeitem{%
 \advance\itemno by 1
 {\let\par=\endgraf \smallbreak}%
-\ifhmode \errmessage{In hmode at itemizeitem}\fi
+\ifhmode \errmessage{\in hmode at itemizeitem}\fi
 {\parskip=0in \hskip 0pt
 \hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
 \vadjust{\penalty 1200}}%
@@ -1983,7 +1879,7 @@ July\or August\or September\or October\or November\or December\fi
 
 % To make preamble:
 %
-% Either define widths of columns in terms of percent of \hsize:
+% Either define widths of columns in terms of percent of \hsize: 
 %   @multitable @columnfractions .25 .3 .45
 %   @item ...
 %
@@ -2001,13 +1897,13 @@ July\or August\or September\or October\or November\or December\fi
 % the preamble, break the line within one argument and it
 % will parse correctly, i.e.,
 %
-%     @multitable {Column 1 template} {Column 2 template} {Column 3
+%     @multitable {Column 1 template} {Column 2 template} {Column 3 
 %      template}
 % Not:
-%     @multitable {Column 1 template} {Column 2 template}
+%     @multitable {Column 1 template} {Column 2 template} 
 %      {Column 3 template}
 
-% Each new table line starts with @item, each subsequent new column
+% Each new table line starts with @item, each subsequent new column 
 % starts with @tab. Empty columns may be produced by supplying @tab's
 % with nothing between them for as many times as empty columns are needed,
 % ie, @tab@tab@tab will produce two empty columns.
@@ -2019,15 +1915,15 @@ July\or August\or September\or October\or November\or December\fi
 
 %   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
 %   @item first col stuff @tab second col stuff @tab third col
-%   @item
-%   first col stuff
-%   @tab
-%   second col stuff
-%   @tab
-%   third col
-%   @item first col stuff @tab second col stuff
+%   @item 
+%   first col stuff 
+%   @tab 
+%   second col stuff 
+%   @tab 
+%   third col 
+%   @item first col stuff @tab second col stuff 
 %   @tab Many paragraphs of text may be used in any column.
-%
+%     
 %         They will wrap at the width determined by the template.
 %   @item@tab@tab This will be in third column.
 %   @end multitable
@@ -2041,7 +1937,7 @@ July\or August\or September\or October\or November\or December\fi
 %   0pt means it depends on current normal line spacing.
 
 %%%%
-% Dimensions
+% Dimensions 
 
 \newskip\multitableparskip
 \newskip\multitableparindent
@@ -2111,18 +2007,18 @@ July\or August\or September\or October\or November\or December\fi
  % To parse everything between @multitable and @item :
 \setuptable#1 \endsetuptable
  % Need to reset this to 0 after \setuptable.
-\global\colcount=0\relax%
+\global\colcount=0\relax% 
  %
  % This preamble sets up a generic column definition, which will
  % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
+ % \vtop will set a single line and will also let text wrap and 
  % continue for many paragraphs if desired.
 \halign\bgroup&\global\advance\colcount by 1\relax%
 \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
  % In order to keep entries from bumping into each other
  % we will add a \leftskip of \multitablecolspace to all columns after
  % the first one.
- %  If a template has been used, we will add \multitablecolspace
+ %  If a template has been used, we will add \multitablecolspace 
  % to the width of each template entry.
  %  If user has set preamble in terms of percent of \hsize
  % we will use that dimension as the width of the column, and
@@ -2134,31 +2030,19 @@ July\or August\or September\or October\or November\or December\fi
   \ifsetpercent
   \else
    % If user has <not> set preamble in terms of percent of \hsize
-   % we will advance \hsize by \multitablecolspace
+   % we will advance \hsize by \multitablecolspace 
   \advance\hsize by \multitablecolspace
   \fi
  % In either case we will make \leftskip=\multitablecolspace:
 \leftskip=\multitablecolspace
 \fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively marking
- % characters.
- \noindent\ignorespaces##\unskip\multistrut}\cr
+\noindent##\multistrut}\cr%
  % \everycr will reset column counter, \colcount, at the end of
- % each line. Every column  entry will cause \colcount to advance by one.
+ % each line. Every column  entry will cause \colcount to advance by one. 
  % The table preamble
  % looks at the current \colcount to find the correct column width.
 \global\everycr{\noalign{%
-% \filbreak%% keeps underfull box messages off when table breaks over pages.
-% Maybe so, but it also creates really weird page breaks when the table
-% breaks over pages Wouldn't \vfil be better?  Wait until the problem
-% manifests itself, so it can be fixed for real --karl.
+\filbreak%% keeps underfull box messages off when table breaks over pages.
 \global\colcount=0\relax}}
 }
 
@@ -2170,7 +2054,7 @@ July\or August\or September\or October\or November\or December\fi
 %% to keep lines equally spaced
 \let\multistrut = \strut
 %% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
+%% table. If not, do nothing. 
 %%        If so, set to same dimension as multitablelinespace.
 \else
 \gdef\multistrut{\vrule height\multitablelinespace depth\dp0
@@ -2305,13 +2189,7 @@ width0pt\relax} \fi
 %\def\char{\realbackslash char}%
 \def\TeX{\realbackslash TeX}%
 \def\dots{\realbackslash dots }%
-\def\result{\realbackslash result}%
-\def\equiv{\realbackslash equiv}%
-\def\expansion{\realbackslash expansion}%
-\def\print{\realbackslash print}%
-\def\error{\realbackslash error}%
-\def\point{\realbackslash point}%
-\def\copyright{\realbackslash copyright}%
+\def\copyright{\realbackslash copyright }%
 \def\tclose##1{\realbackslash tclose {##1}}%
 \def\code##1{\realbackslash code {##1}}%
 \def\dotless##1{\realbackslash dotless {##1}}%
@@ -2321,7 +2199,6 @@ width0pt\relax} \fi
 \def\r##1{\realbackslash r {##1}}%
 \def\i##1{\realbackslash i {##1}}%
 \def\b##1{\realbackslash b {##1}}%
-\def\sc##1{\realbackslash sc {##1}}%
 \def\cite##1{\realbackslash cite {##1}}%
 \def\key##1{\realbackslash key {##1}}%
 \def\file##1{\realbackslash file {##1}}%
@@ -2419,7 +2296,7 @@ width0pt\relax} \fi
       \indexdummies % Must do this here, since \bf, etc expand at this stage
       \escapechar=`\\
       {%
-        \let\folio=0% We will expand all macros now EXCEPT \folio.
+        \let\folio=0 % We will expand all macros now EXCEPT \folio.
         \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
         % so it will be output as is; and it will print as backslash.
         %
@@ -2493,16 +2370,27 @@ width0pt\relax} \fi
 
 % Define the macros used in formatting output of the sorted index material.
 
-% @printindex causes a particular index (the ??s file) to get printed.
-% It does not print any chapter heading (usually an @unnumbered).
-%
+% This is what you call to cause a particular index to get printed.
+% Write
+% @unnumbered Function Index
+% @printindex fn
+
 \def\printindex{\parsearg\doprintindex}
+
 \def\doprintindex#1{\begingroup
   \dobreak \chapheadingskip{10000}%
   %
   \indexfonts \rm
   \tolerance = 9500
   \indexbreaks
+  \def\indexbackslash{\rawbackslashxx}%
+  % Index files are almost Texinfo source, but we use \ as the escape
+  % character.  It would be better to use @, but that's too big a change
+  % to make right now.
+  \catcode`\\ = 0
+  \catcode`\@ = 11
+  \escapechar = `\\
+  \begindoublecolumns
   %
   % See if the index file exists and is nonempty.
   \openin 1 \jobname.#1s
@@ -2521,19 +2409,11 @@ width0pt\relax} \fi
     \ifeof 1
       (Index is empty)
     \else
-      % Index files are almost Texinfo source, but we use \ as the escape
-      % character.  It would be better to use @, but that's too big a change
-      % to make right now.
-      \def\indexbackslash{\rawbackslashxx}%
-      \catcode`\\ = 0
-      \catcode`\@ = 11
-      \escapechar = `\\
-      \begindoublecolumns
       \input \jobname.#1s
-      \enddoublecolumns
     \fi
   \fi
   \closein 1
+  \enddoublecolumns
 \endgroup}
 
 % These macros are used by the sorted index file itself.
@@ -2635,39 +2515,24 @@ width0pt\relax} \fi
 
 \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
   % Grab any single-column material above us.
-  \output = {\global\setbox\partialpage = \vbox{%
-    % 
-    % Here is a possibility not foreseen in manmac: if we accumulate a
-    % whole lot of material, we might end up calling this \output
-    % routine twice in a row (see the doublecol-lose test, which is
-    % essentially a couple of indexes with @setchapternewpage off).  In
-    % that case, we must prevent the second \partialpage from
-    % simply overwriting the first, causing us to lose the page.
-    % This will preserve it until a real output routine can ship it
-    % out.  Generally, \partialpage will be empty when this runs and
-    % this will be a no-op.
-    \unvbox\partialpage
-    %
-    % Unvbox the main output page.
-    \unvbox255
-    \kern-\topskip \kern\baselineskip
-  }}%
+  \output = {\global\setbox\partialpage
+    =\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}%
   \eject
   %
-  % Use the double-column output routine for subsequent pages.
-  \output = {\doublecolumnout}%
+  % Now switch to the double-column output routine.
+  \output={\doublecolumnout}%
   %
   % Change the page size parameters.  We could do this once outside this
   % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
   % format, but then we repeat the same computation.  Repeating a couple
   % of assignments once per index is clearly meaningless for the
-  % execution time, so we may as well do it in one place.
+  % execution time, so we may as well do it once.
   %
   % First we halve the line length, less a little for the gutter between
   % the columns.  We compute the gutter based on the line length, so it
   % changes automatically with the paper format.  The magic constant
-  % below is chosen so that the gutter has the same value (well, +-<1pt)
-  % as it did when we hard-coded it.
+  % below is chosen so that the gutter has the same value (well, +- <
+  % 1pt) as it did when we hard-coded it.
   %
   % We put the result in a separate register, \doublecolumhsize, so we
   % can restore it in \pagesofar, after \hsize itself has (potentially)
@@ -2688,109 +2553,100 @@ width0pt\relax} \fi
   % (undoubled) page height minus any material left over from the
   % previous page.
   \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
-  % box0 will be the left-hand column, box2 the right.
+  % box0 will be the left-hand column, box1 the right.
   \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
   \onepageout\pagesofar
-  \unvbox255
-  \penalty\outputpenalty
+  \unvbox255 \penalty\outputpenalty
 }
 \def\pagesofar{%
-  % Re-output the contents of the output page -- any previous material,
+  % The contents of the output page -- any previous material,
   % followed by the two boxes we just split.
   \unvbox\partialpage
   \hsize = \doublecolumnhsize
   \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}%
 }
 \def\enddoublecolumns{%
-  \output = {\balancecolumns}\eject % split what we have
-  \endgroup % started in \begindoublecolumns
-  %
+  \output={\balancecolumns}\eject % split what we have
+  \endgroup
   % Back to normal single-column typesetting, but take account of the
   % fact that we just accumulated some stuff on the output page.
-  \pagegoal = \vsize
+  \pagegoal=\vsize 
 }
 \def\balancecolumns{%
-  % Called at the end of the double column material.
-  \setbox0 = \vbox{\unvbox255}%
+  % Called on the last page of the double column material.
+  \setbox0=\vbox{\unvbox255}%
   \dimen@ = \ht0
   \advance\dimen@ by \topskip
   \advance\dimen@ by-\baselineskip
   \divide\dimen@ by 2
   \splittopskip = \topskip
   % Loop until we get a decent breakpoint.
-  {\vbadness=10000 \loop
-    \global\setbox3=\copy0
+  {\vbadness=10000 \loop \global\setbox3=\copy0
     \global\setbox1=\vsplit3 to\dimen@
-    \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt
-   \repeat}%
+    \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat}%
   \setbox0=\vbox to\dimen@{\unvbox1}%
   \setbox2=\vbox to\dimen@{\unvbox3}%
   \pagesofar
 }
-\catcode`\@ = \other
+\catcode `\@=\other
 
 
 \message{sectioning,}
 % Define chapters, sections, etc.
 
-\newcount\chapno
-\newcount\secno        \secno=0
-\newcount\subsecno     \subsecno=0
-\newcount\subsubsecno  \subsubsecno=0
+\newcount \chapno
+\newcount \secno        \secno=0
+\newcount \subsecno     \subsecno=0
+\newcount \subsubsecno  \subsubsecno=0
 
 % This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount\appendixno  \appendixno = `\@
+\newcount \appendixno  \appendixno = `\@
 \def\appendixletter{\char\the\appendixno}
 
-\newwrite\contentsfile
+\newwrite \contentsfile
 % This is called from \setfilename.
-\def\opencontents{\openout\contentsfile = \jobname.toc }
+\def\opencontents{\openout \contentsfile = \jobname.toc}
 
 % Each @chapter defines this as the name of the chapter.
 % page headings and footings can use it.  @section does likewise
 
 \def\thischapter{} \def\thissection{}
-\def\seccheck#1{\ifnum \pageno<0
-  \errmessage{@#1 not allowed after generating table of contents}%
-\fi}
+\def\seccheck#1{\if \pageno<0 %
+\errmessage{@#1 not allowed after generating table of contents}\fi
+%
+}
 
 \def\chapternofonts{%
-  \let\rawbackslash=\relax
-  \let\frenchspacing=\relax
-  \def\result{\realbackslash result}%
-  \def\equiv{\realbackslash equiv}%
-  \def\expansion{\realbackslash expansion}%
-  \def\print{\realbackslash print}%
-  \def\TeX{\realbackslash TeX}%
-  \def\dots{\realbackslash dots}%
-  \def\result{\realbackslash result}%
-  \def\equiv{\realbackslash equiv}%
-  \def\expansion{\realbackslash expansion}%
-  \def\print{\realbackslash print}%
-  \def\error{\realbackslash error}%
-  \def\point{\realbackslash point}%
-  \def\copyright{\realbackslash copyright}%
-  \def\tt{\realbackslash tt}%
-  \def\bf{\realbackslash bf}%
-  \def\w{\realbackslash w}%
-  \def\less{\realbackslash less}%
-  \def\gtr{\realbackslash gtr}%
-  \def\hat{\realbackslash hat}%
-  \def\char{\realbackslash char}%
-  \def\tclose##1{\realbackslash tclose{##1}}%
-  \def\code##1{\realbackslash code{##1}}%
-  \def\samp##1{\realbackslash samp{##1}}%
-  \def\r##1{\realbackslash r{##1}}%
-  \def\b##1{\realbackslash b{##1}}%
-  \def\key##1{\realbackslash key{##1}}%
-  \def\file##1{\realbackslash file{##1}}%
-  \def\kbd##1{\realbackslash kbd{##1}}%
-  % These are redefined because @smartitalic wouldn't work inside xdef.
-  \def\i##1{\realbackslash i{##1}}%
-  \def\cite##1{\realbackslash cite{##1}}%
-  \def\var##1{\realbackslash var{##1}}%
-  \def\emph##1{\realbackslash emph{##1}}%
-  \def\dfn##1{\realbackslash dfn{##1}}%
+\let\rawbackslash=\relax%
+\let\frenchspacing=\relax%
+\def\result{\realbackslash result}
+\def\equiv{\realbackslash equiv}
+\def\expansion{\realbackslash expansion}
+\def\print{\realbackslash print}
+\def\TeX{\realbackslash TeX}
+\def\dots{\realbackslash dots}
+\def\copyright{\realbackslash copyright}
+\def\tt{\realbackslash tt}
+\def\bf{\realbackslash bf }
+\def\w{\realbackslash w}
+\def\less{\realbackslash less}
+\def\gtr{\realbackslash gtr}
+\def\hat{\realbackslash hat}
+\def\char{\realbackslash char}
+\def\tclose##1{\realbackslash tclose {##1}}
+\def\code##1{\realbackslash code {##1}}
+\def\samp##1{\realbackslash samp {##1}}
+\def\r##1{\realbackslash r {##1}}
+\def\b##1{\realbackslash b {##1}}
+\def\key##1{\realbackslash key {##1}}
+\def\file##1{\realbackslash file {##1}}
+\def\kbd##1{\realbackslash kbd {##1}}
+% These are redefined because @smartitalic wouldn't work inside xdef.
+\def\i##1{\realbackslash i {##1}}
+\def\cite##1{\realbackslash cite {##1}}
+\def\var##1{\realbackslash var {##1}}
+\def\emph##1{\realbackslash emph {##1}}
+\def\dfn##1{\realbackslash dfn {##1}}
 }
 
 \newcount\absseclevel % used to calculate proper heading level
@@ -2877,8 +2733,7 @@ width0pt\relax} \fi
 % because we don't want its macros evaluated now.
 \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
 {\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash chapentry{\the\toks0}{\the\chapno}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp  %
 \donoderef %
@@ -2897,9 +2752,8 @@ width0pt\relax} \fi
 \gdef\thischaptername{#1}%
 \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
 {\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash chapentry{\the\toks0}%
-  {\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash chapentry
+  {#1}{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp  %
 \appendixnoderef %
@@ -2933,8 +2787,7 @@ width0pt\relax} \fi
 \unnumbchapmacro {#1}%
 \gdef\thischapter{#1}\gdef\thissection{#1}%
 {\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbchapentry{\the\toks0}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp  %
 \unnumbnoderef %
@@ -2949,9 +2802,8 @@ width0pt\relax} \fi
 \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
 \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
 {\chapternofonts%
-\toks0 = {#1}%
 \edef\temp{{\realbackslash secentry %
-{\the\toks0}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
+{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
 \donoderef %
@@ -2965,9 +2817,8 @@ width0pt\relax} \fi
 \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
 \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
 {\chapternofonts%
-\toks0 = {#1}%
 \edef\temp{{\realbackslash secentry %
-{\the\toks0}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
+{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
 \appendixnoderef %
@@ -2979,8 +2830,7 @@ width0pt\relax} \fi
 \def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
 \plainsecheading {#1}\gdef\thissection{#1}%
 {\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbsecentry{\the\toks0}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
 \unnumbnoderef %
@@ -2993,9 +2843,8 @@ width0pt\relax} \fi
 \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
 \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
 {\chapternofonts%
-\toks0 = {#1}%
 \edef\temp{{\realbackslash subsecentry %
-{\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
+{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
 \donoderef %
@@ -3008,9 +2857,8 @@ width0pt\relax} \fi
 \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
 \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
 {\chapternofonts%
-\toks0 = {#1}%
 \edef\temp{{\realbackslash subsecentry %
-{\the\toks0}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
+{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
 \appendixnoderef %
@@ -3022,8 +2870,7 @@ width0pt\relax} \fi
 \def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
 \plainsubsecheading {#1}\gdef\thissection{#1}%
 {\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbsubsecentry{\the\toks0}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
 \unnumbnoderef %
@@ -3037,8 +2884,8 @@ width0pt\relax} \fi
 \subsubsecheading {#1}
   {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
 {\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash subsubsecentry{\the\toks0}
+\edef\temp{{\realbackslash subsubsecentry %
+  {#1}
   {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
   {\noexpand\folio}}}%
 \escapechar=`\\%
@@ -3054,8 +2901,7 @@ width0pt\relax} \fi
 \subsubsecheading {#1}
   {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
 {\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash subsubsecentry{\the\toks0}%
+\edef\temp{{\realbackslash subsubsecentry{#1}%
   {\appendixletter}
   {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
 \escapechar=`\\%
@@ -3069,8 +2915,7 @@ width0pt\relax} \fi
 \def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
 \plainsubsubsecheading {#1}\gdef\thissection{#1}%
 {\chapternofonts%
-\toks0 = {#1}%
-\edef\temp{{\realbackslash unnumbsubsubsecentry{\the\toks0}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
 \unnumbnoderef %
@@ -3251,7 +3096,7 @@ width0pt\relax} \fi
 
 
 % Print any size section title.
-%
+% 
 % #1 is the section type (sec/subsec/subsubsec), #2 is the section
 % number (maybe empty), #3 the text.
 \def\sectionheading#1#2#3{%
@@ -3295,9 +3140,7 @@ width0pt\relax} \fi
    \unnumbchapmacro{#1}\def\thischapter{}%
    \begingroup                  % Set up to handle contents files properly.
       \catcode`\\=0  \catcode`\{=1  \catcode`\}=2  \catcode`\@=11
-      % We can't do this, because then an actual ^ in a section
-      % title fails, e.g., @chapter ^ -- exponentiation.  --karl, 9jul97.
-      %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
+      \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
       \raggedbottom             % Worry more about breakpoints than the bottom.
       \advance\hsize by -\contentsrightmargin % Don't use the full line length.
 }
@@ -3505,13 +3348,14 @@ width0pt\relax} \fi
 \escapechar=`\\
 %
 \let\,=\ptexcomma
+\let\~=\ptextilde
 \let\{=\ptexlbrace
 \let\}=\ptexrbrace
 \let\.=\ptexdot
 \let\*=\ptexstar
 \let\dots=\ptexdots
-\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
-\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}
+\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}
 \def\@{@}%
 \let\bullet=\ptexbullet
 \let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext
@@ -3652,12 +3496,11 @@ width0pt\relax} \fi
 %
 \def\nonfillfinish{\afterenvbreak\endgroup}%
 
+% This macro is
 \def\lisp{\begingroup
   \nonfillstart
   \let\Elisp = \nonfillfinish
   \tt
-  % Make @kbd do something special, if requested.
-  \let\kbdfont\kbdexamplefont
   \rawbackslash % have \ input char produce \ char from current font
   \gobble
 }
@@ -3775,17 +3618,16 @@ width0pt\relax} \fi
 
 % Definitions of (, ) and & used in args for functions.
 % This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
-  \global\advance\parencount by 1
-}
+\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested %
+\global\advance\parencount by 1 }
 %
 % This is the definition of ( when already inside a level of parens.
 \gdef\opnested{\char`\(\global\advance\parencount by 1 }
 %
 \gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
-  % also in that case restore the outer-level definition of (.
-  \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
-  \global\advance \parencount by -1 }
+% also in that case restore the outer-level definition of (.
+\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
+\global\advance \parencount by -1 }
 % If we encounter &foo, then turn on ()-hacking afterwards
 \gdef\amprm#1 {{\rm\&#1}\let(=\oprm \let)=\clrm\ }
 %
@@ -3793,11 +3635,8 @@ width0pt\relax} \fi
 } % End of definition inside \activeparens
 %% These parens (in \boldbrax) actually are a little bolder than the
 %% contained text.  This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
-\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
-\def\ampnr{\&}
-\def\lbrb{{\bf\char`\[}}
-\def\rbrb{{\bf\char`\]}}
+\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&}
+\def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}}
 
 % First, defname, which formats the header line itself.
 % #1 should be the function name.
@@ -3890,7 +3729,7 @@ width0pt\relax} \fi
 
 % This is used for \def{tp,vr}parsebody.  It could probably be used for
 % some of the others, too, with some judicious conditionals.
-%
+% 
 \def\parsebodycommon#1#2#3{%
   \begingroup\inENV %
   \medbreak %
@@ -3924,16 +3763,17 @@ width0pt\relax} \fi
 }
 
 % Fine, but then we have to eventually remove the \empty *and* the
-% braces (if any).  That's what this does.
-%
-\def\removeemptybraces\empty#1\relax{#1}
+% braces (if any).  That's what this does, putting the result in \tptemp.
+% 
+\def\removeemptybraces\empty#1\relax{\def\tptemp{#1}}%
 
 % After \spacesplit has done its work, this is called -- #1 is the final
 % thing to call, #2 the type name (which starts with \empty), and #3
 % (which might be empty) the arguments.
-%
+% 
 \def\parsetpheaderline#1#2#3{%
-  #1{\removeemptybraces#2\relax}{#3}%
+  \removeemptybraces#2\relax
+  #1{\tptemp}{#3}%
 }%
 
 \def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
@@ -3974,7 +3814,7 @@ width0pt\relax} \fi
 \hyphenchar\tensl=0
 #1%
 \hyphenchar\tensl=45
-\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
+\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi%
 \interlinepenalty=10000
 \advance\rightskip by 0pt plus 1fil
 \endgraf\penalty 10000\vskip -\parskip\penalty 10000%
@@ -4075,7 +3915,6 @@ width0pt\relax} \fi
 \def\defmacx #1 {\errmessage{@defmacx in invalid context}}
 \def\defspecx #1 {\errmessage{@defspecx in invalid context}}
 \def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
-\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}}
 \def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}}
 
 % @defmethod, and so on
@@ -4091,16 +3930,6 @@ width0pt\relax} \fi
 \defunargs {#3}\endgroup %
 }
 
-% @deftypemethod foo-class return-type foo-method args
-%
-\def\deftypemethod{%
-  \defmethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
-%
-% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
-\def\deftypemethodheader#1#2#3#4{%
-  \deftypefnheaderx{Method on #1}{#2}#3 #4\relax
-}
-
 % @defmethod == @defop Method
 
 \def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
@@ -4178,21 +4007,19 @@ width0pt\relax} \fi
 
 \def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
 
-% #1 is the data type.  #2 is the name, perhaps followed by text that
-% is actually part of the data type, which should not be put into the index.
+% #1 is the data type.  #2 is the name.
 \def\deftypevarheader #1#2{%
-\dovarind#2 \relax% Make entry in variables index
+\doind {vr}{\code{#2}}% Make entry in variables index
 \begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
 \interlinepenalty=10000
 \endgraf\penalty 10000\vskip -\parskip\penalty 10000
 \endgroup}
-\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
 
 % @deftypevr {Global Flag} int enable
 
 \def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
 
-\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
+\def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}%
 \begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
 \interlinepenalty=10000
 \endgraf\penalty 10000\vskip -\parskip\penalty 10000
@@ -4315,7 +4142,7 @@ width0pt\relax} \fi
 
 % Use \turnoffactive so that punctuation chars such as underscore
 % work in node names.
-\def\dosetq #1#2{{\let\folio=0 \turnoffactive
+\def\dosetq #1#2{{\let\folio=0 \turnoffactive \auxhat%
 \edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
 \next}}
 
@@ -4384,99 +4211,84 @@ width0pt\relax} \fi
   #2% Output the suffix in any case.
 }
 
+% Read the last existing aux file, if any.  No error if none exists.
+
 % This is the macro invoked by entries in the aux file.
-\def\xrdef #1#2{{%
-  \catcode`\'=\other
-  \expandafter\gdef\csname X#1\endcsname{#2}%
-}}
+\def\xrdef #1#2{
+{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}}
 
-% Read the last existing aux file, if any.  No error if none exists.
-\def\readauxfile{\begingroup
-  \catcode`\^^@=\other
-  \catcode`\^^A=\other
-  \catcode`\^^B=\other
-  \catcode`\^^C=\other
-  \catcode`\^^D=\other
-  \catcode`\^^E=\other
-  \catcode`\^^F=\other
-  \catcode`\^^G=\other
-  \catcode`\^^H=\other
-  \catcode`\^^K=\other
-  \catcode`\^^L=\other
-  \catcode`\^^N=\other
-  \catcode`\^^P=\other
-  \catcode`\^^Q=\other
-  \catcode`\^^R=\other
-  \catcode`\^^S=\other
-  \catcode`\^^T=\other
-  \catcode`\^^U=\other
-  \catcode`\^^V=\other
-  \catcode`\^^W=\other
-  \catcode`\^^X=\other
-  \catcode`\^^Z=\other
-  \catcode`\^^[=\other
-  \catcode`\^^\=\other
-  \catcode`\^^]=\other
-  \catcode`\^^^=\other
-  \catcode`\^^_=\other
-  \catcode`\@=\other
-  \catcode`\^=\other
-  % It was suggested to define this as 7, which would allow ^^e4 etc.
-  % in xref tags, i.e., node names.  But since ^^e4 notation isn't
-  % supported in the main text, it doesn't seem desirable.  Furthermore,
-  % that is not enough: for node names that actually contain a ^
-  % character, we would end up writing a line like this: 'xrdef {'hat
-  % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
-  % argument, and \hat is not an expandable control sequence.  It could
-  % all be worked out, but why?  Either we support ^^ or we don't.
-  %
-  % The other change necessary for this was to define \auxhat:
-  % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
-  % and then to call \auxhat in \setq.
-  %
-  \catcode`\~=\other
-  \catcode`\[=\other
-  \catcode`\]=\other
-  \catcode`\"=\other
-  \catcode`\_=\other
-  \catcode`\|=\other
-  \catcode`\<=\other
-  \catcode`\>=\other
-  \catcode`\$=\other
-  \catcode`\#=\other
-  \catcode`\&=\other
-  % `\+ does not work, so use 43.
-  \catcode43=\other
-  % Make the characters 128-255 be printing characters
-  {%
-    \count 1=128
-    \def\loop{%
-      \catcode\count 1=\other
-      \advance\count 1 by 1
-      \ifnum \count 1<256 \loop \fi
-    }%
+\def\readauxfile{%
+\begingroup
+\catcode `\^^@=\other
+\catcode `\
=\other
+\catcode `\=\other
+\catcode `\^^C=\other
+\catcode `\^^D=\other
+\catcode `\^^E=\other
+\catcode `\^^F=\other
+\catcode `\^^G=\other
+\catcode `\^^H=\other
+\catcode `\=\other
+\catcode `\^^L=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode `\=\other
+\catcode 26=\other
+\catcode `\^^[=\other
+\catcode `\^^\=\other
+\catcode `\^^]=\other
+\catcode `\^^^=\other
+\catcode `\^^_=\other
+\catcode `\@=\other
+\catcode `\^=\other
+\catcode `\~=\other
+\catcode `\[=\other
+\catcode `\]=\other
+\catcode`\"=\other
+\catcode`\_=\other
+\catcode`\|=\other
+\catcode`\<=\other
+\catcode`\>=\other
+\catcode `\$=\other
+\catcode `\#=\other
+\catcode `\&=\other
+% `\+ does not work, so use 43.
+\catcode 43=\other
+% Make the characters 128-255 be printing characters
+{%
+  \count 1=128
+  \def\loop{%
+    \catcode\count 1=\other
+    \advance\count 1 by 1
+    \ifnum \count 1<256 \loop \fi
   }%
-  % The aux file uses ' as the escape (for now).
-  % Turn off \ as an escape so we do not lose on
-  % entries which were dumped with control sequences in their names.
-  % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
-  % Reference to such entries still does not work the way one would wish,
-  % but at least they do not bomb out when the aux file is read in.
-  \catcode`\{=1
-  \catcode`\}=2
-  \catcode`\%=\other
-  \catcode`\'=0
-  \catcode`\\=\other
-  %
-  \openin 1 \jobname.aux
-  \ifeof 1 \else
-    \closein 1
-    \input \jobname.aux
-    \global\havexrefstrue
-    \global\warnedobstrue
-  \fi
-  % Open the new aux file.  TeX will close it automatically at exit.
-  \openout\auxfile=\jobname.aux
+}%
+% the aux file uses ' as the escape.
+% Turn off \ as an escape so we do not lose on
+% entries which were dumped with control sequences in their names.
+% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
+% Reference to such entries still does not work the way one would wish,
+% but at least they do not bomb out when the aux file is read in.
+\catcode `\{=1 \catcode `\}=2
+\catcode `\%=\other
+\catcode `\'=0
+\catcode`\^=7 % to make ^^e4 etc usable in xref tags 
+\catcode `\\=\other
+\openin 1 \jobname.aux
+\ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue
+\global\warnedobstrue
+\fi
+% Open the new aux file.  Tex will close it automatically at exit.
+\openout \auxfile=\jobname.aux
 \endgroup}
 
 
@@ -4491,7 +4303,7 @@ width0pt\relax} \fi
 % space to prevent strange expansion errors.)
 \def\supereject{\par\penalty -20000\footnoteno =0 }
 
-% @footnotestyle is meaningful for info output only.
+% @footnotestyle is meaningful for info output only..
 \let\footnotestyle=\comment
 
 \let\ptexfootnote=\footnote
@@ -4517,11 +4329,7 @@ width0pt\relax} \fi
 % Don't bother with the trickery in plain.tex to not require the
 % footnote text as a parameter.  Our footnotes don't need to be so general.
 %
-% Oh yes, they do; otherwise, @ifset and anything else that uses
-% \parseargline fail inside footnotes because the tokens are fixed when
-% the footnote is read.  --karl, 16nov96.
-%
-\long\gdef\footnotezzz{\insert\footins\bgroup
+\long\gdef\footnotezzz#1{\insert\footins{%
   % We want to typeset this text as a normal paragraph, even if the
   % footnote reference occurs in (for example) a display environment.
   % So reset some parameters.
@@ -4543,13 +4351,8 @@ width0pt\relax} \fi
   % expands into a box, it must come within the paragraph, lest it
   % provide a place where TeX can split the footnote.
   \footstrut
-  \futurelet\next\fo@t
+  #1\strut}%
 }
-\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t
-  \else\let\next\f@t\fi \next}
-\def\f@@t{\bgroup\aftergroup\@foot\let\next}
-\def\f@t#1{#1\@foot}
-\def\@foot{\strut\egroup}
 
 }%end \catcode `\@=11
 
@@ -4606,51 +4409,9 @@ width0pt\relax} \fi
 %
 \def\finalout{\overfullrule=0pt}
 
-% @image.  We use the macros from epsf.tex to support this.
-% If epsf.tex is not installed and @image is used, we complain.
-% 
-% Check for and read epsf.tex up front.  If we read it only at @image
-% time, we might be inside a group, and then its definitions would get
-% undone and the next image would fail.
-\openin 1 = xepsf.tex
-\ifeof 1 \else
-  \closein 1
-  \def\epsfannounce{\toks0 = }% do not bother showing banner
-  \input epsf.tex
-\fi
-%
-\newif\ifwarnednoepsf
-\newhelp\noepsfhelp{epsf.tex must be installed for images to
-  work.  It is also included in the Texinfo distribution, or you can get
-  it from ftp://ftp.tug.org/tex/epsf.tex.}
-%
-% Only complain once about lack of epsf.tex.
-\def\image#1{%
-  \ifx\epsfbox\undefined
-    \ifwarnednoepsf \else
-      \errhelp = \noepsfhelp
-      \errmessage{epsf.tex not found, images will be ignored}%
-      \global\warnednoepsftrue
-    \fi
-  \else
-    \imagexxx #1,,,\finish
-  \fi
-}
-%
-% Arguments to @image:
-% #1 is (mandatory) image filename; we tack on .eps extension.
-% #2 is (optional) width, #3 is (optional) height.
-% #4 is just the usual extra ignored arg for parsing this stuff.
-\def\imagexxx#1,#2,#3,#4\finish{%
-  % \epsfbox itself resets \epsf?size at each figure.
-  \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
-  \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
-  \epsfbox{#1.eps}%
-}
 
 % End of control word definitions.
 
-
 \message{and turning on texinfo input format.}
 
 \def\openindices{%
@@ -4823,6 +4584,7 @@ width0pt\relax} \fi
 \def~{{\tt \char '176}}
 \chardef\hat=`\^
 \catcode`\^=\active
+\def\auxhat{\def^{'hat}}
 \def^{{\tt \hat}}
 
 \catcode`\_=\active