From 558f0fa3ea8867587ea66159bd007f6489ea16d8 Mon Sep 17 00:00:00 2001 From: Jim Meyering Date: Sat, 12 Jul 1997 23:16:59 +0000 Subject: revert to previous version --- doc/texinfo.tex | 870 ++++++++++++++++++++------------------------------------ 1 file changed, 316 insertions(+), 554 deletions(-) (limited to 'doc') diff --git a/doc/texinfo.tex b/doc/texinfo.tex index d005d78e2..abd295df0 100644 --- a/doc/texinfo.tex +++ b/doc/texinfo.tex @@ -1,8 +1,7 @@ -%% TeX macros to handle Texinfo files. -%% $Id: texinfo.tex,v 1.13 1997/07/11 15:27:19 meyering Exp $ +%% TeX macros to handle texinfo files % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, -% 94, 95, 96, 97 Free Software Foundation, Inc. +% 94, 95, 1996 Free Software Foundation, Inc. %This texinfo.tex file is free software; you can redistribute it and/or %modify it under the terms of the GNU General Public License as @@ -36,7 +35,7 @@ % This automatically updates the version number based on RCS. \def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}} -\deftexinfoversion$Revision: 1.13 $ +\deftexinfoversion$Revision: 1.14 $ \message{Loading texinfo package [Version \texinfoversion]:} % If in a .fmt file, print the version number @@ -60,6 +59,7 @@ \let\ptexrbrace=\} \let\ptexstar=\* \let\ptext=\t +\let\ptextilde=\~ % Be sure we're in horizontal mode when doing a tie, since we make space % equivalent to this in @example-like environments. Otherwise, a space @@ -72,6 +72,7 @@ \global\let\tiepenalty = \@M \gdef\tie{\leavevmode\penalty\tiepenalty\ } } +\let\~ = \tie % And make it available as @~. \message{Basics,} @@ -101,11 +102,10 @@ \hyphenation{ap-pen-dix} \hyphenation{mini-buf-fer mini-buf-fers} \hyphenation{eshell} -\hyphenation{white-space} % Margin to add to right of even pages, to left of odd pages. -\newdimen \bindingoffset -\newdimen \normaloffset +\newdimen \bindingoffset +\newdimen \normaloffset \newdimen\pagewidth \newdimen\pageheight % Sometimes it is convenient to have everything in the transcript file @@ -119,101 +119,81 @@ \showboxbreadth\maxdimen\showboxdepth\maxdimen }% -% For @cropmarks command. -% Do @cropmarks to get crop marks. -% -\newif\ifcropmarks -\let\cropmarks = \cropmarkstrue +%---------------------Begin change----------------------- % -% Dimensions to add cropmarks at corners. -% Added by P. A. MacKay, 12 Nov. 1986 +%%%% For @cropmarks command. +% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986 % \newdimen\cornerlong \newdimen\cornerthick -\newdimen\topandbottommargin -\newdimen\outerhsize \newdimen\outervsize +\newdimen \topandbottommargin +\newdimen \outerhsize \newdimen \outervsize \cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks \outerhsize=7in %\outervsize=9.5in % Alternative @smallbook page size is 9.25in \outervsize=9.25in \topandbottommargin=.75in - -% Main output routine. -\chardef\PAGE = 255 -\output = {\onepageout{\pagecontents\PAGE}} - -\newbox\headlinebox -\newbox\footlinebox +% +%---------------------End change----------------------- % \onepageout takes a vbox as an argument. Note that \pagecontents % does insertions, but you have to call it yourself. +\chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}} \def\onepageout#1{% - \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi - % + \hoffset=\normaloffset \ifodd\pageno \advance\hoffset by \bindingoffset \else \advance\hoffset by -\bindingoffset\fi - % - % Do this outside of the \shipout so @code etc. will be expanded in - % the headline as they should be, not taken literally (outputting ''code). - \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}% - \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}% - % {% - % Have to do this stuff outside the \shipout because we want it to - % take effect in \write's, yet the group defined by the \vbox ends - % before the \shipout runs. - % - \escapechar = `\\ % use backslash in output files. - \indexdummies % don't expand commands in the output. - \normalturnoffactive % \ in index entries must not stay \, e.g., if - % the page break happens to be in the middle of an example. + \escapechar = `\\ % use backslash in output files. + \indexdummies \shipout\vbox{% - \ifcropmarks \vbox to \outervsize\bgroup - \hsize = \outerhsize - \line{\ewtop\hfil\ewtop}% - \nointerlineskip - \line{% - \vbox{\moveleft\cornerthick\nstop}% - \hfill - \vbox{\moveright\cornerthick\nstop}% - }% - \vskip\topandbottommargin - \line\bgroup - \hfil % center the page within the outer (page) hsize. - \ifodd\pageno\hskip\bindingoffset\fi - \vbox\bgroup - \fi - % - \unvbox\headlinebox + {\let\hsize=\pagewidth \makeheadline}% \pagebody{#1}% - \ifdim\ht\footlinebox > 0pt - % Only leave this space if the footline is nonempty. - % (We lessened \vsize for it in \oddfootingxxx.) - % The \baselineskip=24pt in plain's \makefootline has no effect. - \vskip 2\baselineskip - \unvbox\footlinebox - \fi - % - \ifcropmarks - \egroup % end of \vbox\bgroup - \hfil\egroup % end of (centering) \line\bgroup - \vskip\topandbottommargin plus1fill minus1fill - \boxmaxdepth = \cornerthick - \line{% - \vbox{\moveleft\cornerthick\nsbot}% - \hfill - \vbox{\moveright\cornerthick\nsbot}% - }% - \nointerlineskip - \line{\ewbot\hfil\ewbot}% - \egroup % \vbox from first cropmarks clause - \fi - }% end of \shipout\vbox - }% end of group with \turnoffactive + {\let\hsize=\pagewidth \makefootline}% + }% + }% \advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi } +%%%% For @cropmarks command %%%% + +% Here is a modification of the main output routine for Near East Publications +% This provides right-angle cropmarks at all four corners. +% The contents of the page are centerlined into the cropmarks, +% and any desired binding offset is added as an \hskip on either +% site of the centerlined box. (P. A. MacKay, 12 November, 1986) +% +\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up +{\escapechar=`\\\relax % makes sure backslash is used in output files. + \shipout + \vbox to \outervsize{\hsize=\outerhsize + \vbox{\line{\ewtop\hfill\ewtop}} + \nointerlineskip + \line{\vbox{\moveleft\cornerthick\nstop} + \hfill + \vbox{\moveright\cornerthick\nstop}} + \vskip \topandbottommargin + \centerline{\ifodd\pageno\hskip\bindingoffset\fi + \vbox{ + {\let\hsize=\pagewidth \makeheadline} + \pagebody{#1} + {\let\hsize=\pagewidth \makefootline}} + \ifodd\pageno\else\hskip\bindingoffset\fi} + \vskip \topandbottommargin plus1fill minus1fill + \boxmaxdepth\cornerthick + \line{\vbox{\moveleft\cornerthick\nsbot} + \hfill + \vbox{\moveright\cornerthick\nsbot}} + \nointerlineskip + \vbox{\line{\ewbot\hfill\ewbot}} + }} + \advancepageno + \ifnum\outputpenalty>-20000 \else\dosupereject\fi} +% +% Do @cropmarks to get crop marks +\def\cropmarks{\let\onepageout=\croppageout } + \newinsert\margin \dimen\margin=\maxdimen \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} @@ -227,6 +207,7 @@ \ifr@ggedbottom \kern-\dimen@ \vfil \fi} } +% % Here are the rules for the cropmarks. Note that they are % offset so that the space between them is truly \outerhsize or \outervsize % (P. A. MacKay, 12 November, 1986) @@ -736,11 +717,10 @@ where each line of input produces a line of output.} % \def\ignore{\doignore{ignore}} -% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text. +% Also ignore @ifinfo, @ifhtml, @html, @menu, and @direntry text. % \def\ifinfo{\doignore{ifinfo}} \def\ifhtml{\doignore{ifhtml}} -\def\ifnottex{\doignore{ifnottex}} \def\html{\doignore{html}} \def\menu{\doignore{menu}} \def\direntry{\doignore{direntry}} @@ -767,10 +747,6 @@ where each line of input produces a line of output.} % Make sure that spaces turn into tokens that match what \doignoretext wants. \catcode32 = 10 % - % Ignore braces, too, so mismatched braces don't cause trouble. - \catcode`\{ = 9 - \catcode`\} = 9 - % % And now expand that command. \doignoretext } @@ -862,7 +838,7 @@ where each line of input produces a line of output.} \pretolerance = 10000 % % Do not execute instructions in @tex - \def\tex{\doignore{tex}}% + \def\tex{\doignore{tex}} } % @set VAR sets the variable VAR to an empty value. @@ -874,9 +850,7 @@ where each line of input produces a line of output.} % didn't need it. Make sure the catcode of space is correct to avoid % losing inside @example, for instance. % -\def\set{\begingroup\catcode` =10 - \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. - \parsearg\setxxx} +\def\set{\begingroup\catcode` =10 \parsearg\setxxx} \def\setxxx#1{\setyyy#1 \endsetyyy} \def\setyyy#1 #2\endsetyyy{% \def\temp{#2}% @@ -897,16 +871,10 @@ where each line of input produces a line of output.} % @value{foo} gets the text saved in variable foo. % -\def\value{\begingroup - \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. - \valuexxx} -\def\valuexxx#1{% - \expandafter\ifx\csname SET#1\endcsname\relax - {\{No value for ``#1''\}}% - \else - \csname SET#1\endcsname - \fi -\endgroup} +\def\value#1{\expandafter + \ifx\csname SET#1\endcsname\relax + {\{No value for ``#1''\}} + \else \csname SET#1\endcsname \fi} % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined % with @set. @@ -938,16 +906,11 @@ where each line of input produces a line of output.} \def\ifclearfail{\nestedignore{ifclear}} \defineunmatchedend{ifclear} -% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text -% following, through the first @end iftex (etc.). Make `@end iftex' -% (etc.) valid only after an @iftex. +% @iftex always succeeds; we read the text following, through @end +% iftex). But `@end iftex' should be valid only after an @iftex. % \def\iftex{\conditionalsucceed{iftex}} -\def\ifnothtml{\conditionalsucceed{ifnothtml}} -\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} \defineunmatchedend{iftex} -\defineunmatchedend{ifnothtml} -\defineunmatchedend{ifnotinfo} % We can't just want to start a group at @iftex (for example) and end it % at @end iftex, since then @set commands inside the conditional have no @@ -1023,15 +986,6 @@ where each line of input produces a line of output.} \openindices \fixbackslash % Turn off hack to swallow `\input texinfo'. \global\let\setfilename=\comment % Ignore extra @setfilename cmds. - % - % If texinfo.cnf is present on the system, read it. - % Useful for site-wide @afourpaper, etc. - % Just to be on the safe side, close the input stream before the \input. - \openin 1 texinfo.cnf - \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi - \closein1 - \temp - % \comment % Ignore the actual filename. } @@ -1067,9 +1021,8 @@ where each line of input produces a line of output.} % We don't need math for this one. \def\ttsl{\tenttsl} -% Use Computer Modern fonts at \magstephalf (11pt). -\newcount\mainmagstep -\mainmagstep=\magstephalf +%% Try out Computer Modern fonts at \magstephalf +\let\mainmagstep=\magstephalf % Set the font macro #1 to the font named #2, adding on the % specified font prefix (normally `cm'). @@ -1141,26 +1094,13 @@ where each line of input produces a line of output.} \font\indi=cmmi9 \font\indsy=cmsy9 -% Fonts for title page: -\setfont\titlerm\rmbshape{12}{\magstep3} -\setfont\titleit\itbshape{10}{\magstep4} -\setfont\titlesl\slbshape{10}{\magstep4} -\setfont\titlett\ttbshape{12}{\magstep3} -\setfont\titlettsl\ttslshape{10}{\magstep4} -\setfont\titlesf\sfbshape{17}{\magstep1} -\let\titlebf=\titlerm -\setfont\titlesc\scbshape{10}{\magstep4} -\font\titlei=cmmi12 scaled \magstep3 -\font\titlesy=cmsy10 scaled \magstep4 -\let\authorrm = \secrm - % Chapter (and unnumbered) fonts (17.28pt). \setfont\chaprm\rmbshape{12}{\magstep2} \setfont\chapit\itbshape{10}{\magstep3} \setfont\chapsl\slbshape{10}{\magstep3} \setfont\chaptt\ttbshape{12}{\magstep2} \setfont\chapttsl\ttslshape{10}{\magstep3} -\setfont\chapsf\sfbshape{17}{1000} +\setfont\chapsf\sfbshape{12}{\magstep2} \let\chapbf=\chaprm \setfont\chapsc\scbshape{10}{\magstep3} \font\chapi=cmmi12 scaled \magstep2 @@ -1197,15 +1137,19 @@ where each line of input produces a line of output.} \setfont\ssecit\itbshape{10}{1315} \setfont\ssecsl\slbshape{10}{1315} \setfont\ssectt\ttbshape{12}{\magstephalf} -\setfont\ssecttsl\ttslshape{10}{1315} +\setfont\ssecttsl\ttslshape{10}{\magstep1} \setfont\ssecsf\sfbshape{12}{\magstephalf} \let\ssecbf\ssecrm \setfont\ssecsc\scbshape{10}{\magstep1} \font\sseci=cmmi12 scaled \magstephalf -\font\ssecsy=cmsy10 scaled 1315 +\font\ssecsy=cmsy10 scaled \magstep1 % The smallcaps and symbol fonts should actually be scaled \magstep1.5, % but that is not a standard magnification. +% Fonts for title page: +\setfont\titlerm\rmbshape{12}{\magstep3} +\let\authorrm = \secrm + % In order for the font changes to affect most math symbols and letters, % we have to define the \textfont of the standard families. Since % texinfo doesn't allow for producing subscripts and superscripts, we @@ -1230,12 +1174,6 @@ where each line of input produces a line of output.} \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl \resetmathfonts} -\def\titlefonts{% - \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl - \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc - \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy - \let\tenttsl=\titlettsl - \resetmathfonts \setleading{25pt}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc @@ -1313,6 +1251,8 @@ where each line of input produces a line of output.} \def\ctrl #1{{\tt \rawbackslash \hat}#1} \let\file=\samp +\let\url=\samp % perhaps include a hypertex \special eventually +\def\email#1{$\langle${\tt #1}$\rangle$} % @code is a modification of @t, % which makes spaces the same size as normal in the surrounding text. @@ -1349,82 +1289,36 @@ where each line of input produces a line of output.} { \catcode`\-=\active \catcode`\_=\active -\catcode`\|=\active \global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex} % The following is used by \doprintindex to insure that long function names % wrap around. It is necessary for - and _ to be active before the index is % read from the file, as \entry parses the arguments long before \code is % ever called. -- mycroft -% _ is always active; and it shouldn't be \let = to an _ that is a -% subscript character anyway. Then, @cindex @samp{_} (for example) -% fails. --karl -\global\def\indexbreaks{% - \catcode`\-=\active \let-\realdash -} +\global\def\indexbreaks{\catcode`\-=\active \let-\realdash \catcode`\_=\active \let_\realunder} } \def\realdash{-} +\def\realunder{_} \def\codedash{-\discretionary{}{}{}} -\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}} +\def\codeunder{\normalunderscore\discretionary{}{}{}} \def\codex #1{\tclose{#1}\endgroup} %\let\exp=\tclose %Was temporary % @kbd is like @code, except that if the argument is just one @key command, % then @kbd has no effect. - -% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), -% `example' (@kbd uses ttsl only inside of @example and friends), -% or `code' (@kbd uses normal tty font always). -\def\kbdinputstyle{\parsearg\kbdinputstylexxx} -\def\kbdinputstylexxx#1{% - \def\arg{#1}% - \ifx\arg\worddistinct - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% - \else\ifx\arg\wordexample - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% - \else\ifx\arg\wordcode - \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% - \fi\fi\fi -} -\def\worddistinct{distinct} -\def\wordexample{example} -\def\wordcode{code} - -% Default is kbdinputdistinct. (Too much of a hassle to call the macro, -% the catcodes are wrong for parsearg to work.) -\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl} - +% \def\xkey{\key} \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% \ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\kbdfont\look}}\fi -\else{\tclose{\kbdfont\look}}\fi} - -% @url, @email. Quotes do not seem necessary. -\let\url=\code % perhaps include a hypertex \special eventually -% rms does not like the angle brackets --karl, 17may97. -%\def\email#1{$\langle${\tt #1}$\rangle$} -\let\email=\code - -% @uref (abbreviation for `urlref') takes an optional second argument -% specifying the text to display. First (mandatory) arg is the url. -% -\def\uref#1{\urefxxx #1,,\finish} -\def\urefxxx#1,#2,#3\finish{% - \setbox0 = \hbox{\ignorespaces #2}% - \ifdim\wd0 > 0pt - \unhbox0\ (\code{#1})% - \else - \code{#1}% - \fi -} +\else{\tclose{\ttsl\look}}\fi +\else{\tclose{\ttsl\look}}\fi} % Check if we are currently using a typewriter font. Since all the % Computer Modern typewriter fonts have zero interword stretch (and % shrink), and it is reasonable to expect all typewriter fonts to have % this property, we can check that font parameter. -% +% \def\ifmonospace{\ifdim\fontdimen3\font=0pt } % Typeset a dimension, e.g., `in' or `pt'. The only reason for the @@ -1455,6 +1349,8 @@ where each line of input produces a line of output.} \newskip\titlepagebottomglue \titlepagebottomglue = 2pc % First the title page. Must do @settitle before @titlepage. +\def\titlefont#1{{\titlerm #1}} + \newif\ifseenauthor \newif\iffinishedtitlepage @@ -1476,7 +1372,7 @@ where each line of input produces a line of output.} % % Now you can print the title using @title. \def\title{\parsearg\titlezzz}% - \def\titlezzz##1{\leftline{\titlefonts\rm ##1} + \def\titlezzz##1{\leftline{\titlefont{##1}} % print a rule at the page bottom also. \finishedtitlepagefalse \vskip4pt \hrule height 4pt width \hsize \vskip4pt}% @@ -1565,7 +1461,10 @@ where each line of input produces a line of output.} \gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{% \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}% +\gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish} +\gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{% +\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}} +\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} \gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish} \gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{% @@ -1573,15 +1472,12 @@ where each line of input produces a line of output.} \gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish} \gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{% - \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% - % - % Leave some space for the footline. Hopefully ok to assume - % @evenfooting will not be used by itself. - \global\advance\pageheight by -\baselineskip - \global\advance\vsize by -\baselineskip -} +\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}} +\gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish} +\gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{% +\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}} +\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} % }% unbind the catcode of @. @@ -1965,7 +1861,7 @@ July\or August\or September\or October\or November\or December\fi \def\itemizeitem{% \advance\itemno by 1 {\let\par=\endgraf \smallbreak}% -\ifhmode \errmessage{In hmode at itemizeitem}\fi +\ifhmode \errmessage{\in hmode at itemizeitem}\fi {\parskip=0in \hskip 0pt \hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% \vadjust{\penalty 1200}}% @@ -1983,7 +1879,7 @@ July\or August\or September\or October\or November\or December\fi % To make preamble: % -% Either define widths of columns in terms of percent of \hsize: +% Either define widths of columns in terms of percent of \hsize: % @multitable @columnfractions .25 .3 .45 % @item ... % @@ -2001,13 +1897,13 @@ July\or August\or September\or October\or November\or December\fi % the preamble, break the line within one argument and it % will parse correctly, i.e., % -% @multitable {Column 1 template} {Column 2 template} {Column 3 +% @multitable {Column 1 template} {Column 2 template} {Column 3 % template} % Not: -% @multitable {Column 1 template} {Column 2 template} +% @multitable {Column 1 template} {Column 2 template} % {Column 3 template} -% Each new table line starts with @item, each subsequent new column +% Each new table line starts with @item, each subsequent new column % starts with @tab. Empty columns may be produced by supplying @tab's % with nothing between them for as many times as empty columns are needed, % ie, @tab@tab@tab will produce two empty columns. @@ -2019,15 +1915,15 @@ July\or August\or September\or October\or November\or December\fi % @multitable {Column 1 template} {Column 2 template} {Column 3 template} % @item first col stuff @tab second col stuff @tab third col -% @item -% first col stuff -% @tab -% second col stuff -% @tab -% third col -% @item first col stuff @tab second col stuff +% @item +% first col stuff +% @tab +% second col stuff +% @tab +% third col +% @item first col stuff @tab second col stuff % @tab Many paragraphs of text may be used in any column. -% +% % They will wrap at the width determined by the template. % @item@tab@tab This will be in third column. % @end multitable @@ -2041,7 +1937,7 @@ July\or August\or September\or October\or November\or December\fi % 0pt means it depends on current normal line spacing. %%%% -% Dimensions +% Dimensions \newskip\multitableparskip \newskip\multitableparindent @@ -2111,18 +2007,18 @@ July\or August\or September\or October\or November\or December\fi % To parse everything between @multitable and @item : \setuptable#1 \endsetuptable % Need to reset this to 0 after \setuptable. -\global\colcount=0\relax% +\global\colcount=0\relax% % % This preamble sets up a generic column definition, which will % be used as many times as user calls for columns. - % \vtop will set a single line and will also let text wrap and + % \vtop will set a single line and will also let text wrap and % continue for many paragraphs if desired. \halign\bgroup&\global\advance\colcount by 1\relax% \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname % In order to keep entries from bumping into each other % we will add a \leftskip of \multitablecolspace to all columns after % the first one. - % If a template has been used, we will add \multitablecolspace + % If a template has been used, we will add \multitablecolspace % to the width of each template entry. % If user has set preamble in terms of percent of \hsize % we will use that dimension as the width of the column, and @@ -2134,31 +2030,19 @@ July\or August\or September\or October\or November\or December\fi \ifsetpercent \else % If user has set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace + % we will advance \hsize by \multitablecolspace \advance\hsize by \multitablecolspace \fi % In either case we will make \leftskip=\multitablecolspace: \leftskip=\multitablecolspace \fi - % Ignoring space at the beginning and end avoids an occasional spurious - % blank line, when TeX decides to break the line at the space before the - % box from the multistrut, so the strut ends up on a line by itself. - % For example: - % @multitable @columnfractions .11 .89 - % @item @code{#} - % @tab Legal holiday which is valid in major parts of the whole country. - % Is automatically provided with highlighting sequences respectively marking - % characters. - \noindent\ignorespaces##\unskip\multistrut}\cr +\noindent##\multistrut}\cr% % \everycr will reset column counter, \colcount, at the end of - % each line. Every column entry will cause \colcount to advance by one. + % each line. Every column entry will cause \colcount to advance by one. % The table preamble % looks at the current \colcount to find the correct column width. \global\everycr{\noalign{% -% \filbreak%% keeps underfull box messages off when table breaks over pages. -% Maybe so, but it also creates really weird page breaks when the table -% breaks over pages Wouldn't \vfil be better? Wait until the problem -% manifests itself, so it can be fixed for real --karl. +\filbreak%% keeps underfull box messages off when table breaks over pages. \global\colcount=0\relax}} } @@ -2170,7 +2054,7 @@ July\or August\or September\or October\or November\or December\fi %% to keep lines equally spaced \let\multistrut = \strut %% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. +%% table. If not, do nothing. %% If so, set to same dimension as multitablelinespace. \else \gdef\multistrut{\vrule height\multitablelinespace depth\dp0 @@ -2305,13 +2189,7 @@ width0pt\relax} \fi %\def\char{\realbackslash char}% \def\TeX{\realbackslash TeX}% \def\dots{\realbackslash dots }% -\def\result{\realbackslash result}% -\def\equiv{\realbackslash equiv}% -\def\expansion{\realbackslash expansion}% -\def\print{\realbackslash print}% -\def\error{\realbackslash error}% -\def\point{\realbackslash point}% -\def\copyright{\realbackslash copyright}% +\def\copyright{\realbackslash copyright }% \def\tclose##1{\realbackslash tclose {##1}}% \def\code##1{\realbackslash code {##1}}% \def\dotless##1{\realbackslash dotless {##1}}% @@ -2321,7 +2199,6 @@ width0pt\relax} \fi \def\r##1{\realbackslash r {##1}}% \def\i##1{\realbackslash i {##1}}% \def\b##1{\realbackslash b {##1}}% -\def\sc##1{\realbackslash sc {##1}}% \def\cite##1{\realbackslash cite {##1}}% \def\key##1{\realbackslash key {##1}}% \def\file##1{\realbackslash file {##1}}% @@ -2419,7 +2296,7 @@ width0pt\relax} \fi \indexdummies % Must do this here, since \bf, etc expand at this stage \escapechar=`\\ {% - \let\folio=0% We will expand all macros now EXCEPT \folio. + \let\folio=0 % We will expand all macros now EXCEPT \folio. \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now % so it will be output as is; and it will print as backslash. % @@ -2493,16 +2370,27 @@ width0pt\relax} \fi % Define the macros used in formatting output of the sorted index material. -% @printindex causes a particular index (the ??s file) to get printed. -% It does not print any chapter heading (usually an @unnumbered). -% +% This is what you call to cause a particular index to get printed. +% Write +% @unnumbered Function Index +% @printindex fn + \def\printindex{\parsearg\doprintindex} + \def\doprintindex#1{\begingroup \dobreak \chapheadingskip{10000}% % \indexfonts \rm \tolerance = 9500 \indexbreaks + \def\indexbackslash{\rawbackslashxx}% + % Index files are almost Texinfo source, but we use \ as the escape + % character. It would be better to use @, but that's too big a change + % to make right now. + \catcode`\\ = 0 + \catcode`\@ = 11 + \escapechar = `\\ + \begindoublecolumns % % See if the index file exists and is nonempty. \openin 1 \jobname.#1s @@ -2521,19 +2409,11 @@ width0pt\relax} \fi \ifeof 1 (Index is empty) \else - % Index files are almost Texinfo source, but we use \ as the escape - % character. It would be better to use @, but that's too big a change - % to make right now. - \def\indexbackslash{\rawbackslashxx}% - \catcode`\\ = 0 - \catcode`\@ = 11 - \escapechar = `\\ - \begindoublecolumns \input \jobname.#1s - \enddoublecolumns \fi \fi \closein 1 + \enddoublecolumns \endgroup} % These macros are used by the sorted index file itself. @@ -2635,39 +2515,24 @@ width0pt\relax} \fi \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns % Grab any single-column material above us. - \output = {\global\setbox\partialpage = \vbox{% - % - % Here is a possibility not foreseen in manmac: if we accumulate a - % whole lot of material, we might end up calling this \output - % routine twice in a row (see the doublecol-lose test, which is - % essentially a couple of indexes with @setchapternewpage off). In - % that case, we must prevent the second \partialpage from - % simply overwriting the first, causing us to lose the page. - % This will preserve it until a real output routine can ship it - % out. Generally, \partialpage will be empty when this runs and - % this will be a no-op. - \unvbox\partialpage - % - % Unvbox the main output page. - \unvbox255 - \kern-\topskip \kern\baselineskip - }}% + \output = {\global\setbox\partialpage + =\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}% \eject % - % Use the double-column output routine for subsequent pages. - \output = {\doublecolumnout}% + % Now switch to the double-column output routine. + \output={\doublecolumnout}% % % Change the page size parameters. We could do this once outside this % routine, in each of @smallbook, @afourpaper, and the default 8.5x11 % format, but then we repeat the same computation. Repeating a couple % of assignments once per index is clearly meaningless for the - % execution time, so we may as well do it in one place. + % execution time, so we may as well do it once. % % First we halve the line length, less a little for the gutter between % the columns. We compute the gutter based on the line length, so it % changes automatically with the paper format. The magic constant - % below is chosen so that the gutter has the same value (well, +-<1pt) - % as it did when we hard-coded it. + % below is chosen so that the gutter has the same value (well, +- < + % 1pt) as it did when we hard-coded it. % % We put the result in a separate register, \doublecolumhsize, so we % can restore it in \pagesofar, after \hsize itself has (potentially) @@ -2688,109 +2553,100 @@ width0pt\relax} \fi % (undoubled) page height minus any material left over from the % previous page. \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage - % box0 will be the left-hand column, box2 the right. + % box0 will be the left-hand column, box1 the right. \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ \onepageout\pagesofar - \unvbox255 - \penalty\outputpenalty + \unvbox255 \penalty\outputpenalty } \def\pagesofar{% - % Re-output the contents of the output page -- any previous material, + % The contents of the output page -- any previous material, % followed by the two boxes we just split. \unvbox\partialpage \hsize = \doublecolumnhsize \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}% } \def\enddoublecolumns{% - \output = {\balancecolumns}\eject % split what we have - \endgroup % started in \begindoublecolumns - % + \output={\balancecolumns}\eject % split what we have + \endgroup % Back to normal single-column typesetting, but take account of the % fact that we just accumulated some stuff on the output page. - \pagegoal = \vsize + \pagegoal=\vsize } \def\balancecolumns{% - % Called at the end of the double column material. - \setbox0 = \vbox{\unvbox255}% + % Called on the last page of the double column material. + \setbox0=\vbox{\unvbox255}% \dimen@ = \ht0 \advance\dimen@ by \topskip \advance\dimen@ by-\baselineskip \divide\dimen@ by 2 \splittopskip = \topskip % Loop until we get a decent breakpoint. - {\vbadness=10000 \loop - \global\setbox3=\copy0 + {\vbadness=10000 \loop \global\setbox3=\copy0 \global\setbox1=\vsplit3 to\dimen@ - \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt - \repeat}% + \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat}% \setbox0=\vbox to\dimen@{\unvbox1}% \setbox2=\vbox to\dimen@{\unvbox3}% \pagesofar } -\catcode`\@ = \other +\catcode `\@=\other \message{sectioning,} % Define chapters, sections, etc. -\newcount\chapno -\newcount\secno \secno=0 -\newcount\subsecno \subsecno=0 -\newcount\subsubsecno \subsubsecno=0 +\newcount \chapno +\newcount \secno \secno=0 +\newcount \subsecno \subsecno=0 +\newcount \subsubsecno \subsubsecno=0 % This counter is funny since it counts through charcodes of letters A, B, ... -\newcount\appendixno \appendixno = `\@ +\newcount \appendixno \appendixno = `\@ \def\appendixletter{\char\the\appendixno} -\newwrite\contentsfile +\newwrite \contentsfile % This is called from \setfilename. -\def\opencontents{\openout\contentsfile = \jobname.toc } +\def\opencontents{\openout \contentsfile = \jobname.toc} % Each @chapter defines this as the name of the chapter. % page headings and footings can use it. @section does likewise \def\thischapter{} \def\thissection{} -\def\seccheck#1{\ifnum \pageno<0 - \errmessage{@#1 not allowed after generating table of contents}% -\fi} +\def\seccheck#1{\if \pageno<0 % +\errmessage{@#1 not allowed after generating table of contents}\fi +% +} \def\chapternofonts{% - \let\rawbackslash=\relax - \let\frenchspacing=\relax - \def\result{\realbackslash result}% - \def\equiv{\realbackslash equiv}% - \def\expansion{\realbackslash expansion}% - \def\print{\realbackslash print}% - \def\TeX{\realbackslash TeX}% - \def\dots{\realbackslash dots}% - \def\result{\realbackslash result}% - \def\equiv{\realbackslash equiv}% - \def\expansion{\realbackslash expansion}% - \def\print{\realbackslash print}% - \def\error{\realbackslash error}% - \def\point{\realbackslash point}% - \def\copyright{\realbackslash copyright}% - \def\tt{\realbackslash tt}% - \def\bf{\realbackslash bf}% - \def\w{\realbackslash w}% - \def\less{\realbackslash less}% - \def\gtr{\realbackslash gtr}% - \def\hat{\realbackslash hat}% - \def\char{\realbackslash char}% - \def\tclose##1{\realbackslash tclose{##1}}% - \def\code##1{\realbackslash code{##1}}% - \def\samp##1{\realbackslash samp{##1}}% - \def\r##1{\realbackslash r{##1}}% - \def\b##1{\realbackslash b{##1}}% - \def\key##1{\realbackslash key{##1}}% - \def\file##1{\realbackslash file{##1}}% - \def\kbd##1{\realbackslash kbd{##1}}% - % These are redefined because @smartitalic wouldn't work inside xdef. - \def\i##1{\realbackslash i{##1}}% - \def\cite##1{\realbackslash cite{##1}}% - \def\var##1{\realbackslash var{##1}}% - \def\emph##1{\realbackslash emph{##1}}% - \def\dfn##1{\realbackslash dfn{##1}}% +\let\rawbackslash=\relax% +\let\frenchspacing=\relax% +\def\result{\realbackslash result} +\def\equiv{\realbackslash equiv} +\def\expansion{\realbackslash expansion} +\def\print{\realbackslash print} +\def\TeX{\realbackslash TeX} +\def\dots{\realbackslash dots} +\def\copyright{\realbackslash copyright} +\def\tt{\realbackslash tt} +\def\bf{\realbackslash bf } +\def\w{\realbackslash w} +\def\less{\realbackslash less} +\def\gtr{\realbackslash gtr} +\def\hat{\realbackslash hat} +\def\char{\realbackslash char} +\def\tclose##1{\realbackslash tclose {##1}} +\def\code##1{\realbackslash code {##1}} +\def\samp##1{\realbackslash samp {##1}} +\def\r##1{\realbackslash r {##1}} +\def\b##1{\realbackslash b {##1}} +\def\key##1{\realbackslash key {##1}} +\def\file##1{\realbackslash file {##1}} +\def\kbd##1{\realbackslash kbd {##1}} +% These are redefined because @smartitalic wouldn't work inside xdef. +\def\i##1{\realbackslash i {##1}} +\def\cite##1{\realbackslash cite {##1}} +\def\var##1{\realbackslash var {##1}} +\def\emph##1{\realbackslash emph {##1}} +\def\dfn##1{\realbackslash dfn {##1}} } \newcount\absseclevel % used to calculate proper heading level @@ -2877,8 +2733,7 @@ width0pt\relax} \fi % because we don't want its macros evaluated now. \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}% {\chapternofonts% -\toks0 = {#1}% -\edef\temp{{\realbackslash chapentry{\the\toks0}{\the\chapno}{\noexpand\folio}}}% +\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}% \escapechar=`\\% \write \contentsfile \temp % \donoderef % @@ -2897,9 +2752,8 @@ width0pt\relax} \fi \gdef\thischaptername{#1}% \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}% {\chapternofonts% -\toks0 = {#1}% -\edef\temp{{\realbackslash chapentry{\the\toks0}% - {\putwordAppendix{} \appendixletter}{\noexpand\folio}}}% +\edef\temp{{\realbackslash chapentry + {#1}{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}% \escapechar=`\\% \write \contentsfile \temp % \appendixnoderef % @@ -2933,8 +2787,7 @@ width0pt\relax} \fi \unnumbchapmacro {#1}% \gdef\thischapter{#1}\gdef\thissection{#1}% {\chapternofonts% -\toks0 = {#1}% -\edef\temp{{\realbackslash unnumbchapentry{\the\toks0}{\noexpand\folio}}}% +\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}% \escapechar=`\\% \write \contentsfile \temp % \unnumbnoderef % @@ -2949,9 +2802,8 @@ width0pt\relax} \fi \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}% {\chapternofonts% -\toks0 = {#1}% \edef\temp{{\realbackslash secentry % -{\the\toks0}{\the\chapno}{\the\secno}{\noexpand\folio}}}% +{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}% \escapechar=`\\% \write \contentsfile \temp % \donoderef % @@ -2965,9 +2817,8 @@ width0pt\relax} \fi \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}% {\chapternofonts% -\toks0 = {#1}% \edef\temp{{\realbackslash secentry % -{\the\toks0}{\appendixletter}{\the\secno}{\noexpand\folio}}}% +{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}% \escapechar=`\\% \write \contentsfile \temp % \appendixnoderef % @@ -2979,8 +2830,7 @@ width0pt\relax} \fi \def\unnumberedseczzz #1{\seccheck{unnumberedsec}% \plainsecheading {#1}\gdef\thissection{#1}% {\chapternofonts% -\toks0 = {#1}% -\edef\temp{{\realbackslash unnumbsecentry{\the\toks0}{\noexpand\folio}}}% +\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}% \escapechar=`\\% \write \contentsfile \temp % \unnumbnoderef % @@ -2993,9 +2843,8 @@ width0pt\relax} \fi \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}% {\chapternofonts% -\toks0 = {#1}% \edef\temp{{\realbackslash subsecentry % -{\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% +{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% \escapechar=`\\% \write \contentsfile \temp % \donoderef % @@ -3008,9 +2857,8 @@ width0pt\relax} \fi \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}% {\chapternofonts% -\toks0 = {#1}% \edef\temp{{\realbackslash subsecentry % -{\the\toks0}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% +{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% \escapechar=`\\% \write \contentsfile \temp % \appendixnoderef % @@ -3022,8 +2870,7 @@ width0pt\relax} \fi \def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}% \plainsubsecheading {#1}\gdef\thissection{#1}% {\chapternofonts% -\toks0 = {#1}% -\edef\temp{{\realbackslash unnumbsubsecentry{\the\toks0}{\noexpand\folio}}}% +\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}% \escapechar=`\\% \write \contentsfile \temp % \unnumbnoderef % @@ -3037,8 +2884,8 @@ width0pt\relax} \fi \subsubsecheading {#1} {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}% {\chapternofonts% -\toks0 = {#1}% -\edef\temp{{\realbackslash subsubsecentry{\the\toks0} +\edef\temp{{\realbackslash subsubsecentry % + {#1} {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno} {\noexpand\folio}}}% \escapechar=`\\% @@ -3054,8 +2901,7 @@ width0pt\relax} \fi \subsubsecheading {#1} {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}% {\chapternofonts% -\toks0 = {#1}% -\edef\temp{{\realbackslash subsubsecentry{\the\toks0}% +\edef\temp{{\realbackslash subsubsecentry{#1}% {\appendixletter} {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}% \escapechar=`\\% @@ -3069,8 +2915,7 @@ width0pt\relax} \fi \def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}% \plainsubsubsecheading {#1}\gdef\thissection{#1}% {\chapternofonts% -\toks0 = {#1}% -\edef\temp{{\realbackslash unnumbsubsubsecentry{\the\toks0}{\noexpand\folio}}}% +\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}% \escapechar=`\\% \write \contentsfile \temp % \unnumbnoderef % @@ -3251,7 +3096,7 @@ width0pt\relax} \fi % Print any size section title. -% +% % #1 is the section type (sec/subsec/subsubsec), #2 is the section % number (maybe empty), #3 the text. \def\sectionheading#1#2#3{% @@ -3295,9 +3140,7 @@ width0pt\relax} \fi \unnumbchapmacro{#1}\def\thischapter{}% \begingroup % Set up to handle contents files properly. \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 - % We can't do this, because then an actual ^ in a section - % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. - %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi + \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi \raggedbottom % Worry more about breakpoints than the bottom. \advance\hsize by -\contentsrightmargin % Don't use the full line length. } @@ -3505,13 +3348,14 @@ width0pt\relax} \fi \escapechar=`\\ % \let\,=\ptexcomma +\let\~=\ptextilde \let\{=\ptexlbrace \let\}=\ptexrbrace \let\.=\ptexdot \let\*=\ptexstar \let\dots=\ptexdots -\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% -\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% +\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}} +\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi} \def\@{@}% \let\bullet=\ptexbullet \let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext @@ -3652,12 +3496,11 @@ width0pt\relax} \fi % \def\nonfillfinish{\afterenvbreak\endgroup}% +% This macro is \def\lisp{\begingroup \nonfillstart \let\Elisp = \nonfillfinish \tt - % Make @kbd do something special, if requested. - \let\kbdfont\kbdexamplefont \rawbackslash % have \ input char produce \ char from current font \gobble } @@ -3775,17 +3618,16 @@ width0pt\relax} \fi % Definitions of (, ) and & used in args for functions. % This is the definition of ( outside of all parentheses. -\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested - \global\advance\parencount by 1 -} +\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested % +\global\advance\parencount by 1 } % % This is the definition of ( when already inside a level of parens. \gdef\opnested{\char`\(\global\advance\parencount by 1 } % \gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0. - % also in that case restore the outer-level definition of (. - \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi - \global\advance \parencount by -1 } +% also in that case restore the outer-level definition of (. +\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi +\global\advance \parencount by -1 } % If we encounter &foo, then turn on ()-hacking afterwards \gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ } % @@ -3793,11 +3635,8 @@ width0pt\relax} \fi } % End of definition inside \activeparens %% These parens (in \boldbrax) actually are a little bolder than the %% contained text. This is especially needed for [ and ] -\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 } -\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 } -\def\ampnr{\&} -\def\lbrb{{\bf\char`\[}} -\def\rbrb{{\bf\char`\]}} +\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&} +\def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}} % First, defname, which formats the header line itself. % #1 should be the function name. @@ -3890,7 +3729,7 @@ width0pt\relax} \fi % This is used for \def{tp,vr}parsebody. It could probably be used for % some of the others, too, with some judicious conditionals. -% +% \def\parsebodycommon#1#2#3{% \begingroup\inENV % \medbreak % @@ -3924,16 +3763,17 @@ width0pt\relax} \fi } % Fine, but then we have to eventually remove the \empty *and* the -% braces (if any). That's what this does. -% -\def\removeemptybraces\empty#1\relax{#1} +% braces (if any). That's what this does, putting the result in \tptemp. +% +\def\removeemptybraces\empty#1\relax{\def\tptemp{#1}}% % After \spacesplit has done its work, this is called -- #1 is the final % thing to call, #2 the type name (which starts with \empty), and #3 % (which might be empty) the arguments. -% +% \def\parsetpheaderline#1#2#3{% - #1{\removeemptybraces#2\relax}{#3}% + \removeemptybraces#2\relax + #1{\tptemp}{#3}% }% \def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV % @@ -3974,7 +3814,7 @@ width0pt\relax} \fi \hyphenchar\tensl=0 #1% \hyphenchar\tensl=45 -\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi% +\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi% \interlinepenalty=10000 \advance\rightskip by 0pt plus 1fil \endgraf\penalty 10000\vskip -\parskip\penalty 10000% @@ -4075,7 +3915,6 @@ width0pt\relax} \fi \def\defmacx #1 {\errmessage{@defmacx in invalid context}} \def\defspecx #1 {\errmessage{@defspecx in invalid context}} \def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}} -\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}} \def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}} % @defmethod, and so on @@ -4091,16 +3930,6 @@ width0pt\relax} \fi \defunargs {#3}\endgroup % } -% @deftypemethod foo-class return-type foo-method args -% -\def\deftypemethod{% - \defmethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader} -% -% #1 is the class name, #2 the data type, #3 the method name, #4 the args. -\def\deftypemethodheader#1#2#3#4{% - \deftypefnheaderx{Method on #1}{#2}#3 #4\relax -} - % @defmethod == @defop Method \def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} @@ -4178,21 +4007,19 @@ width0pt\relax} \fi \def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader} -% #1 is the data type. #2 is the name, perhaps followed by text that -% is actually part of the data type, which should not be put into the index. +% #1 is the data type. #2 is the name. \def\deftypevarheader #1#2{% -\dovarind#2 \relax% Make entry in variables index +\doind {vr}{\code{#2}}% Make entry in variables index \begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}% \interlinepenalty=10000 \endgraf\penalty 10000\vskip -\parskip\penalty 10000 \endgroup} -\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}} % @deftypevr {Global Flag} int enable \def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader} -\def\deftypevrheader #1#2#3{\dovarind#3 \relax% +\def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}% \begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1} \interlinepenalty=10000 \endgraf\penalty 10000\vskip -\parskip\penalty 10000 @@ -4315,7 +4142,7 @@ width0pt\relax} \fi % Use \turnoffactive so that punctuation chars such as underscore % work in node names. -\def\dosetq #1#2{{\let\folio=0 \turnoffactive +\def\dosetq #1#2{{\let\folio=0 \turnoffactive \auxhat% \edef\next{\write\auxfile{\internalsetq {#1}{#2}}}% \next}} @@ -4384,99 +4211,84 @@ width0pt\relax} \fi #2% Output the suffix in any case. } +% Read the last existing aux file, if any. No error if none exists. + % This is the macro invoked by entries in the aux file. -\def\xrdef #1#2{{% - \catcode`\'=\other - \expandafter\gdef\csname X#1\endcsname{#2}% -}} +\def\xrdef #1#2{ +{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}} -% Read the last existing aux file, if any. No error if none exists. -\def\readauxfile{\begingroup - \catcode`\^^@=\other - \catcode`\^^A=\other - \catcode`\^^B=\other - \catcode`\^^C=\other - \catcode`\^^D=\other - \catcode`\^^E=\other - \catcode`\^^F=\other - \catcode`\^^G=\other - \catcode`\^^H=\other - \catcode`\^^K=\other - \catcode`\^^L=\other - \catcode`\^^N=\other - \catcode`\^^P=\other - \catcode`\^^Q=\other - \catcode`\^^R=\other - \catcode`\^^S=\other - \catcode`\^^T=\other - \catcode`\^^U=\other - \catcode`\^^V=\other - \catcode`\^^W=\other - \catcode`\^^X=\other - \catcode`\^^Z=\other - \catcode`\^^[=\other - \catcode`\^^\=\other - \catcode`\^^]=\other - \catcode`\^^^=\other - \catcode`\^^_=\other - \catcode`\@=\other - \catcode`\^=\other - % It was suggested to define this as 7, which would allow ^^e4 etc. - % in xref tags, i.e., node names. But since ^^e4 notation isn't - % supported in the main text, it doesn't seem desirable. Furthermore, - % that is not enough: for node names that actually contain a ^ - % character, we would end up writing a line like this: 'xrdef {'hat - % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first - % argument, and \hat is not an expandable control sequence. It could - % all be worked out, but why? Either we support ^^ or we don't. - % - % The other change necessary for this was to define \auxhat: - % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter - % and then to call \auxhat in \setq. - % - \catcode`\~=\other - \catcode`\[=\other - \catcode`\]=\other - \catcode`\"=\other - \catcode`\_=\other - \catcode`\|=\other - \catcode`\<=\other - \catcode`\>=\other - \catcode`\$=\other - \catcode`\#=\other - \catcode`\&=\other - % `\+ does not work, so use 43. - \catcode43=\other - % Make the characters 128-255 be printing characters - {% - \count 1=128 - \def\loop{% - \catcode\count 1=\other - \advance\count 1 by 1 - \ifnum \count 1<256 \loop \fi - }% +\def\readauxfile{% +\begingroup +\catcode `\^^@=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\^^C=\other +\catcode `\^^D=\other +\catcode `\^^E=\other +\catcode `\^^F=\other +\catcode `\^^G=\other +\catcode `\^^H=\other +\catcode `\ =\other +\catcode `\^^L=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode `\=\other +\catcode 26=\other +\catcode `\^^[=\other +\catcode `\^^\=\other +\catcode `\^^]=\other +\catcode `\^^^=\other +\catcode `\^^_=\other +\catcode `\@=\other +\catcode `\^=\other +\catcode `\~=\other +\catcode `\[=\other +\catcode `\]=\other +\catcode`\"=\other +\catcode`\_=\other +\catcode`\|=\other +\catcode`\<=\other +\catcode`\>=\other +\catcode `\$=\other +\catcode `\#=\other +\catcode `\&=\other +% `\+ does not work, so use 43. +\catcode 43=\other +% Make the characters 128-255 be printing characters +{% + \count 1=128 + \def\loop{% + \catcode\count 1=\other + \advance\count 1 by 1 + \ifnum \count 1<256 \loop \fi }% - % The aux file uses ' as the escape (for now). - % Turn off \ as an escape so we do not lose on - % entries which were dumped with control sequences in their names. - % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ - % Reference to such entries still does not work the way one would wish, - % but at least they do not bomb out when the aux file is read in. - \catcode`\{=1 - \catcode`\}=2 - \catcode`\%=\other - \catcode`\'=0 - \catcode`\\=\other - % - \openin 1 \jobname.aux - \ifeof 1 \else - \closein 1 - \input \jobname.aux - \global\havexrefstrue - \global\warnedobstrue - \fi - % Open the new aux file. TeX will close it automatically at exit. - \openout\auxfile=\jobname.aux +}% +% the aux file uses ' as the escape. +% Turn off \ as an escape so we do not lose on +% entries which were dumped with control sequences in their names. +% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ +% Reference to such entries still does not work the way one would wish, +% but at least they do not bomb out when the aux file is read in. +\catcode `\{=1 \catcode `\}=2 +\catcode `\%=\other +\catcode `\'=0 +\catcode`\^=7 % to make ^^e4 etc usable in xref tags +\catcode `\\=\other +\openin 1 \jobname.aux +\ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue +\global\warnedobstrue +\fi +% Open the new aux file. Tex will close it automatically at exit. +\openout \auxfile=\jobname.aux \endgroup} @@ -4491,7 +4303,7 @@ width0pt\relax} \fi % space to prevent strange expansion errors.) \def\supereject{\par\penalty -20000\footnoteno =0 } -% @footnotestyle is meaningful for info output only. +% @footnotestyle is meaningful for info output only.. \let\footnotestyle=\comment \let\ptexfootnote=\footnote @@ -4517,11 +4329,7 @@ width0pt\relax} \fi % Don't bother with the trickery in plain.tex to not require the % footnote text as a parameter. Our footnotes don't need to be so general. % -% Oh yes, they do; otherwise, @ifset and anything else that uses -% \parseargline fail inside footnotes because the tokens are fixed when -% the footnote is read. --karl, 16nov96. -% -\long\gdef\footnotezzz{\insert\footins\bgroup +\long\gdef\footnotezzz#1{\insert\footins{% % We want to typeset this text as a normal paragraph, even if the % footnote reference occurs in (for example) a display environment. % So reset some parameters. @@ -4543,13 +4351,8 @@ width0pt\relax} \fi % expands into a box, it must come within the paragraph, lest it % provide a place where TeX can split the footnote. \footstrut - \futurelet\next\fo@t + #1\strut}% } -\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t - \else\let\next\f@t\fi \next} -\def\f@@t{\bgroup\aftergroup\@foot\let\next} -\def\f@t#1{#1\@foot} -\def\@foot{\strut\egroup} }%end \catcode `\@=11 @@ -4606,51 +4409,9 @@ width0pt\relax} \fi % \def\finalout{\overfullrule=0pt} -% @image. We use the macros from epsf.tex to support this. -% If epsf.tex is not installed and @image is used, we complain. -% -% Check for and read epsf.tex up front. If we read it only at @image -% time, we might be inside a group, and then its definitions would get -% undone and the next image would fail. -\openin 1 = xepsf.tex -\ifeof 1 \else - \closein 1 - \def\epsfannounce{\toks0 = }% do not bother showing banner - \input epsf.tex -\fi -% -\newif\ifwarnednoepsf -\newhelp\noepsfhelp{epsf.tex must be installed for images to - work. It is also included in the Texinfo distribution, or you can get - it from ftp://ftp.tug.org/tex/epsf.tex.} -% -% Only complain once about lack of epsf.tex. -\def\image#1{% - \ifx\epsfbox\undefined - \ifwarnednoepsf \else - \errhelp = \noepsfhelp - \errmessage{epsf.tex not found, images will be ignored}% - \global\warnednoepsftrue - \fi - \else - \imagexxx #1,,,\finish - \fi -} -% -% Arguments to @image: -% #1 is (mandatory) image filename; we tack on .eps extension. -% #2 is (optional) width, #3 is (optional) height. -% #4 is just the usual extra ignored arg for parsing this stuff. -\def\imagexxx#1,#2,#3,#4\finish{% - % \epsfbox itself resets \epsf?size at each figure. - \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi - \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi - \epsfbox{#1.eps}% -} % End of control word definitions. - \message{and turning on texinfo input format.} \def\openindices{% @@ -4823,6 +4584,7 @@ width0pt\relax} \fi \def~{{\tt \char '176}} \chardef\hat=`\^ \catcode`\^=\active +\def\auxhat{\def^{'hat}} \def^{{\tt \hat}} \catcode`\_=\active -- cgit v1.2.3-70-g09d2