| Age | Commit message (Collapse) | Author |
|---|
|
Not checking the return value of asprintf calls reuslts in a warning
when using -D_FORTIRFY_SOURCE=2. This adds a simple wrapper around
asprintf calls which checks the return value.
Currently the check does nothing more than outputing a message to stderr
on failure, but that is at least an improvement over silent failures.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These keep having to change because we are getting really good at changing
the downloaded filename. Shorten the match sequences to just .db and .pkg
and trim everything after and including these strings.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The combination of tabs and spaces is annoying in any editor that
does not use a tab width of 2 spaces.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
From the fgets manpage:
fgets() reads in at most one less than size characters from stream and
stores them into the buffer pointed to by s. Reading stops after an EOF
or a newline. If a newline is read, it is stored into the buffer. A
'\0' is stored after the last character in the buffer.
This means there is no need at all to do 'size - 1' math. Remove all of that
and just use sizeof() for simplicity on the buffer we plan on reading into.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Gettext has this whole 'Plural-Form' thing that until now we haven't taken
advantage of. Given that not all languages have the same plural form rules
as English, take advantage of it by defining a new _n() macro which will
normally define to ngettext(), and adjust a few messages as an example of
how to use.
There are surely other places where we do singular/plural logic without me
having noticed, so further patches are welcome to fix those up too.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
I'm not sure why it doesn't happen everywhere, but we need <sys/stat.h> for
umask and mkdir in this file. I hit this today:
cc1: warnings being treated as errors
util.c: In function ‘makepath’:
util.c:128:2: error: implicit declaration of function ‘umask’
util.c:141:5: error: implicit declaration of function ‘mkdir’
make[2]: *** [util.o] Error 1
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Prevents compiler warnings when building with -D_FORTIFY_SOURCE=2
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The casting of nread is safe as it is tested to be >0 when it is
initally assigned. It is also being implicitly cast in the fwrite
call in the line above.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Follow the HACKING guidelines and always use != 0 or == 0 rather
than negation within conditional statements to improve clarity.
Most of these are !strcmp usages which is the example of what not
to do in the HACKING document.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Dan: line wrapping and man page touchup.
Signed-off-by: Marc-A. Dahlhaus <mad@wol.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fix a regression of 51f9e5e40a7 that only allowed Include in repo sections.
Thanks to Marc - A. Dahlhaus for reporting the issue.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When pacman queries the ownership of an object that is not a path, it will
check in the users PATH for a match. Implements FS#8798.
Dan: did some small refactoring and error message changes when PATH is
searched and nothing is found.
Original-patch-by: Shankar <jatheendra@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had the long option wrong in some places and its behavior wasn't
documented at all with regards to -U/--upgrade.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In addition, I permuted shortopts to make it more readable.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The request of FS#12950 is implemented.
On the backend side, I introduced a new function, alpm_db_set_pkgreason(),
to modify the install reason of a package in the local database. On the
front-end side, I introduced a new main operation, -D/--database, which has
two options, --asdeps and --asexplicit. I documented this in pacman manual.
I've created two pactests to test -D: database001.py and database002.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Include the object file directly from the libalpm version comparison code as
it is the only thing we need. This drops the dependency of vercmp on
libalpm and all of the stuff we know it drags in.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Serge Ziryukin <ftrvxmtrx@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
http://mailman.archlinux.org/pipermail/pacman-dev/2010-March/010519.html
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Just as we do in -Qi, we can compute required by information for sync
database packages. The behavior seems sane; for a given package, the -Sii
required by will show all packages in *any* sync database that require it.
Implements FS#16244.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Since we were searching for '.pkg.tar.gz' before, we now have started to
show extensions during the download when we have a '.pkg.tar.xz' package.
Just look for '.pkg.tar.' (or '.db.tar.') instead and suppress anything
found from that point on.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
- remove unused variables
- some more sanity checks
- safer printf
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These were just introduced in the `--print` patch, and don't need to be
exposed outside of util.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
And a new --print-format option to configure the output.
This implements FS#14208
Example usage :
pacman -Sp --print-format "%r/%n-%v : %l [%s]" kdelibs
extra/kdelibs-4.3.2-4 : ftp://mir2.archlinuxfr.org/archlinux/extra/os/i686/kdelibs-4.3.2-4-i686.pkg.tar.gz [0,00]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#17523
We always used a fixed value of 50 for textlen, which is often not enough
for download progress bar. At least we can use a bigger width on large
terminal (e.g. 60% of width) and keep 50 as minimum.
before:
nautilus-2.28.4-1-x... 5.7M 789.2K/s 00:00:07 [####################################] 100%
after:
nautilus-2.28.4-1-x86_64 5.7M 770.7K/s 00:00:08 [##############################] 100%
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
1 - Explain magic numbers
2 - There was a weird off by 1 mess in the progress bar. The code supposedly
shared the width between 50 chars for text (textlen) and the rest for the
progress bar (proglen = getcols() - textlen).
But the code actually used textlen + 1 for the text and proglen - 1 for the
progress bar (with haslen=1, the progress bar was actually empty), which was
a bit confusing so I changed it.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When using --downloadonly the "Total Installed Size" message is not
needed and perhaps misleading.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The "local database is up to date" message has been replaced with "there
is nothing to do" message. This used with "empty" -S, -R, -U operations too.
(Examples: pacman -S ignored_pkg, pacman -Ru needed_pkg.)
See FS#17859.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
getopt should already ensure that optarg is not NULL when an argument is
required, but just be extra safe and double check it before using optarg.
To be honest, I only did that to make clang shut up and eliminate the last
warnings it reported.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This function was quite huge (~230 lines) and difficult to parse, now it is
slightly better.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This ensures we never have trailing whitespace. Take the following text,
with line numbers added for clarity:
1. Title : item1 item2 item3 item4
2. item5 item6 item7 item8
3. item9 itemA itemB itemC
Laszlo Papp helpfully pointed out we would have two trailing spaces on line
three after the last item. However, we also had these trailing spaces on
lines one and two, which the initial patch didn't take care of. This can be
seen on something like `pacman -Qi glibc`.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Sorry for this being such a huge patch, but I believe it is necessary for
quite a few reasons which I will attempt to explain herein. I've been
mulling this over for a while, but wasn't super happy with making the
download interface more complex. Instead, if we carefully order things in
the internal download code, we can actually make the interface simpler.
1. FS#15657 - This involves `name.db.tar.gz.part` files being left around the
filesystem, and then causing all sorts of issues when someone attempts to
rerun the operation they canceled. We need to ensure that if we resume a
download, we are resuming it on exactly the same file; if we cannot be
almost postive of that then we need to start over.
2. http://www.mail-archive.com/pacman-dev@archlinux.org/msg03536.html - Here
we have a lighttpd bug to ruin the day. If we send both a Range: header and
If-Modified-Since: header across the wire in a GET request, lighttpd doesn't
do what we want in several cases. If the file hadn't been modified, it
returns a '304 Not Modified' instead of a '206 Partial Content'. We need to
do a stat (e.g. HEAD in HTTP terms) operation here, and the proceed
accordingly based off the values we get back from it.
3. The mtime stuff was rather ugly, and relied on the called function to
write back to a passed in reference, which isn't the greatest. Instead, use
the power of the filesystem to contain this info. Every file downloaded
internally is now carefully timestamped with the remote file time. This
should allow the resume logic to work. In order to guarantee this, we need
to implement a signal handler that catches interrupts, notifies the running
code, and causes it to set the mtimes on the file. It then rethrows the
signal so the pacman signal handler (or any frontend) works as expected.
4. We did a lot of funky stuff in trying to track the DB last modified time.
It is a lot easier to just keep the downloaded DB file around and track the
time on that rather than in a funky dot file. It also kills a lot of code.
5. For GPG verification of the databases down the road, we are going to need
the DB file around for at least a short bit of time anyway, so this gets us
closer to that.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Xav: fixed printf with off_t]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
* It makes the code clearer to read/understand
* Cppcheck tool doesn't show this anymore: [./util.c:215]: (error) Resource leak: fd
[Dan: don't change the coding style]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Thanks to Laszlo Papp <djszapi@archlinux.us> for the following catch:
opendir(path)) == (DIR *)-1;
is maybe the result of misunderstanding the manpage. If an opendir() call
isn't successful it returns NULL rather than '(DIR *)-1'.
Noticed-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Pacman's fgets function in the API used hardcoded numbers to identify the size.
This is not good practice, so replace them with sizeof handling.
Signed-off-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Pacman's long option parsing used hardcoded numbers to identify them.
This is not good practice, so replace them with enumeration constants.
Signed-off-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
See http://www.nabble.com/-PATCH-RFA--Distinguish-between-EOF-and-character-with-value-0xff-td23161772.html#a23188494
cygwin 1.7 actually displays a warning when using signed char with the ctype
function, so that compilation fails when using -Wall -Werror.
So we just cast all arguments to unsigned char.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
When using totaldownload, we might get into some weird situations where
xfered>total because of bogus CSIZE database entries.
This code adds a sanity check and fallbacks to normal download progress if
needed.
Here is an example using totaldownload on a database with wrong CSIZE, for a
total download of ~26 MB.
Before :
gnome-desktop-2.28.... 1144,3K 678,3K/s 00:00:02 [#################] 4%
gnome-panel-2.28.0-... 4,2M 887,7K/s 00:00:05 [#################] 16%
gnome-applets-2.28.... 13,6M 1083,0K/s 00:00:13 [#################] 52%
gnome-backgrounds-2... 22,9M 964,0K/s 00:00:24 [#################] 87%
gnome-settings-daem... 23,6M 938,5K/s 00:00:26 [#################] 90%
gnome-control-cente... 26,1M 946,1K/s 00:00:28 [#################] 100%
gnome-icon-theme-2.... 27,7M 1465,0K/s 1193046:28:15 [#######----------] gnome-icon-theme-2.... 28,0M 1502,2K/s 1193046:28:15 [########---------] gnome-icon-theme-2.... 28,4M 1582,2K/s 1193046:28:15 [##########-------] gnome-icon-theme-2.... 28,7M 1603,4K/s 1193046:28:15 [############-----] gnome-icon-theme-2.... 29,0M 1604,5K/s 1193046:28:15 [##############---] gnome-icon-theme-2.... 29,3M 1621,0K/s 1193046:28:14 [################-] gnome-icon-theme-2.... 29,6M 1434,8K/s 1193046:28:14 [#################] gnome-icon-theme-2.... 29,6M 974,2K/s 00:00:31 [#################] 113%
After :
gnome-desktop-2.28.... 1144,3K 1038,7K/s 00:00:01 [#################] 4%
gnome-panel-2.28.0-... 4,2M 988,4K/s 00:00:04 [#################] 16%
gnome-applets-2.28.... 13,6M 1190,4K/s 00:00:12 [#################] 52%
gnome-backgrounds-2... 22,9M 1242,9K/s 00:00:19 [#################] 87%
gnome-settings-daem... 23,6M 1193,9K/s 00:00:20 [#################] 90%
gnome-control-cente... 2,5M 1347,4K/s 00:00:02 [#################] 100%
gnome-icon-theme-2.... 3,5M 1205,4K/s 00:00:03 [#################] 100%
Note that gnome-control-center resetted to normal progress mode
(2,5M is the package size, not the total size)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Yes, it was that bad :P
We still have memleaks left because we cannot free the error data returned
by libalpm, but pacman has the same issue.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Previously we only looked at the first cache directory returned by the
library. This allows us to look at all cache directories for cleaning.
In addition, change the way we do a full (-Scc) cache cleaning operation.
Instead of removing the parent directory, remove each package one-by-one as
in the -Sc case. This would be ideal for someone mounting a cache directory
over NFS, as it ensures we don't wipe out the mountpoint from underneath the
directory.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We didn't look at the return status of sync_cleandb() in sync_cleandb_all().
Make it do so and return it up the call chain.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
