| Age | Commit message (Collapse) | Author |
|---|
|
Detected by clang scan-build static code analyzer.
* Don't attempt to free an uninitialized gpgme key variable
* Initialize answer variable before asking frontend a question
* Pass by reference instead of value if uninitialized fields are
possible in download signal handler code
* Ensure we never call strlen() on NULL payload->remote_name value
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Dan was right. This should have been FREE(), not free().
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This encompasses a few languages that have had changes since 4.0.2
available on Transifex.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Pull updates from transifex, run update-po on all files, fix a few
errors, and push them back to Transifex.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
For key searches only, gpg2 will fail to lookup any and all keys that
are not prefixed with 0x.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In case we have a mirror failure, unlink_on_fail would remain set,
causing an interrupt in a successive download attempt to be wrongly
unlinked.
This also fixes a memory leak in the url member, as we would allocate
over the previous, unfreed URL.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
To avoid conflicts on reusing a payload after a failed download, ensure
that we reset the filename hints in the payload struct prior to the
download operation.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* it updates to all translations
* minor fr, pt_BR, de, lt, sk and uk updates
* add new strings in pacman translation catalog
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we begin to create a file list when loading a package, but abort
because of an error to one of our goto labels, the memory used to create
the file list will leak. This is because we use a set of local variables
to hold the data, and thus _alpm_pkg_free() cannot clean up for us.
Use the file list struct on the package object as much as possible to
keep state when building the file list, thus allowing _alpm_pkg_free()
to clean up any partially built data.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is easily triggered via a `pacman -Sc` operation when it attempts
to open a delta file as a package- we end up leaking loads of memory
due to us never freeing the archive object. When you have upwards of
1200 delta files in your sync database directory, this results in a
memory leak of nearly 1.5 MiB.
Also fix another memory leak noticed at the same time- we need to call
the internal _alpm_pkg_free() function, as without the origin data being
set the public free function will do nothing.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Mostly a waste of time. Sure, we no longer make sure your pacman
database partition has enough space, but if you are using this option
you better know what you are doing anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit ee969006056c86e88d5f179a7575d64f23d5b252)
|
|
If one had a mountpoint at '/e' (don't ask), a file being installed to
'/etc' would map to it incorrectly. Ensure we do more than just prefix
matching on paths by doing some more sanity checks once the simple
strncmp() call succeeds.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This reverts commit f3fa77bcf1d792971c314f8c0de255866e89f3f3 along with
making other necessary changes to fully back this (mis)feature out until
we can do it correctly.
The quick summary here is this was not implemented correctly; provides
are not fully taken into account in this logic, and making that happen
exposes a lot of other flaws in this code that are covered up later on
in the dependency resolving process by several other pieces of
convoluted and conditional logic.
Tests have been adjusted accordingly. Some test EXISTS conditions have
been removed as we already know the package is installed locally, and we
also are checking the VERSION condition anyway.
With these two related revert commits, we do have some changes in test
pass/fail results:
* upgrade078.py: does not pass, this is due to --recursive getting
removed for -U/-S operations after this commit.
* sync302.py: the version checks have been disabled, so this test
continues to pass but has been scaled back in scope.
* sync303.py: now passes, was failing before.
* sync304.py: still failing, was failing before.
* sync305.py: now passes, was failing before.
* sync306.py: still passes, was passing before.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The max filesize for a delta download must be the full size of the delta
file, not just what's remaining.
Fixes FS#28345
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is after some manual massaging to fix issues with newlines in some
translations of the script catalogs.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The pacman-scripts catalog is omitted here due to various newline errors
I don't have the time to fix right now.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Very rarely a segfault would occur when removing a number of packages
due to a corrupted list for the local database (FS#27805, FS#28195).
This was caused by the alpm_list_msort function not correctly dealing
with the two new head node's prev values.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is particularly important in the case of FTP control connections,
which may be closed by rogue NAT/firewall devices detecting idle
connections on larger transfers which may take 5-10+ minutes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Was able to get my hands on one of these boxes today, so add yet another
new way of doing this. I'm glad these calls are so standardized. This
was compile tested on Linux and Illumos and seems to still be working in
both places.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The entry's name is only used when not "." or ".." so only print the
string then.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We lost this logic somewhere between the libfetch and libcurl
transition, as it existed in the internal downloader, but was pulled
back only into the sync workflow. Add a helper function that will let us
check for existance in the filecache prior to calling the downloader.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is safer and guaranteed to work with even exotic character sets.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We don't need two log messages back-to-back about the same thing here.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
PGP keyservers are pieces of sh** when it comes to searching for
subkeys, and only allow it if you submit an 8-character fingerprint
rather than the recommended and less chance of collision 16-character
fingerprint.
Add a second remote lookup for the 8-character version of a key ID if we
don't find anything the first time we look up the key. This fixes
FS#27612 and the deficiency has been sent upstream to the GnuPG users
mailing list as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were using the size of a pointer, not the size of the whole
archive_read_buffer struct. Thanks to Clang/LLVM 3.0 and Allan/Dave in
IRC for finding this one.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had a 16 KiB limit on database signatures, we should do the same here
too to have a slight sanity check, even if we can't do so for the
package itself yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When doing a bare -U operation on a local package that doesn't pull in
any dependencies from the sync databases, we can get away with missing
database files. This makes the check conditional on no sync targets
found in the target list. This is not the prettiest code here so we have
a bit of hackish behavior required to straighten both the behavior and
the nonsensical error message out.
Addresses FS#26899.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Bump the version, update the translation template files, and fill in
NEWS with relevant commits and changes since 4.0.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The point of this early compare to NULL byte check was so we could bail
early and skip the strcmp() call. Given we weren't doing the check
right, this never exited early. Fix it to work as intended.
Noticed-by: Pepe Juárez <trulustapa@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Replacing the strdup when after the first NULL check assures that we get
continue with payload->remote_name defined.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Dan: fix mask calculation, add it to the success/fail block instead.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This takes the place of three previously used constants:
ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE.
In libarchive 3.0, the first constant will be no more, so we can ensure
we are forward-compatible by removing our usage of it now. The rest are
unified for consistency.
By default, we will use the value of BUFSIZ provided by <stdio.h>, which
is 8192 on Linux. If that is undefined, a default value is provided.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There aretwo seperate issues in the same block of file conflict
checking code here:
1) If realpath errored, such as when a symlink was broken, we would call
'continue' rather than simply exit this particular method of
resolution. This was likely just a copy-paste mistake as the previous
resolving steps all use loops where continue makes sense. Refactor
the check so we only proceed if realpath is successful, and continue
with the rest of the checks either way.
2) The real problem this code was trying to solve was canonicalizing
path component (e.g., directory) symlinks. The final component, if
not a directory, should not be handled at all in this loop. Add a
!S_ISLNK() condition to the loop so we only call this for real files.
There are few other small cleanups to the debug messages that I made
while debugging this problem- we don't need to keep printing the file
name, and ensure every block that sets resolved_conflict to true prints
a debug message so we know how it was resolved.
This fixes the expected failures from symlink010.py and symlink011.py,
while still ensuring the fix for fileconflict007.py works.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There is some pecular behavior going on here when a package is loaded
that has no files, as is very common in our test suite. When we enter
the realloc/sort code, a package without files will call the following:
files = realloc(NULL, 0);
One would assume this is a no-op, returning a NULL pointer, but that is
not the case and valgrind later reports we are leaking memory. Fix the
whole thing by skipping the reallocation and sort steps if the pointer
is NULL, as we have nothing to do.
Note that the package still gets marked as 'files loaded', becuase
although there were none, we tried and were successful.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Extend the return values of compute_download_size to allow callers to
know that a .part file exists for the package.
This extra value isn't currently used, but it'll be needed later on.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds a logger to the CURLE_OK case so we can always know the return
code if it was >= 400, and debug log it regardless. Also adjust another
logger to use the cURL error message directly, as well as use fstat()
when we have an open file handle rather than stat().
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The absolutely terrible part about this is the failure on GPGME's part
to distinguish between "key not found" and "keyserver timeout". Instead,
it returns the same silly GPG_ERR_EOF in both cases (why isn't
GPG_ERR_TIMEOUT being used?), leaving us helpless to tell them apart.
Spit out a generic enough error message that covers both cases;
unfortunately we can't provide much guidance to the user because we
aren't sure what actually happened.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Thanks to Eduardo Tongson on the mailing list.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is in the realm of "probably not going to happen", but if someone
were to translate "disk" to a string longer than 256 characters, we
would have a smashed/corrupted stack due to our unchecked strcpy() call.
Rework the function to always length-check the value we copy into the
hostname buffer, and do it with memcpy rather than the more cumbersome
and unnecessary snprintf.
Finally, move the magic 256 value into a constant and pass it into the
function which is going to get inlined anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This should help point users in the right direction if they have not
initialized via pacman-key just yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
