| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This prevents possible null dereferences in FTP transfers when the
progress callback is touched during connection teardown.
http://curl.haxx.se/mail/lib-2011-08/0128.html
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Dan: make it compile, s/load/payload/.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is done extremely crudely and is not very efficient, but it does
push us down the path of being closer to right, as one additional test
now passes.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Add *_hash fields to conflict struct and populate them
* Remove unnecessary backwards string comparisons
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This also pulls in some early translations we had entered in Transifex
in the last day so those would not be lost. The diffstat is huge and not
very telling as usual, as all sorts of fuzzyness switches happened this
time around for some reason.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If the string was zero-length to begin with, or consists of only newline
characters, nothing stopped us from incrementing right off the front of
the string. Ensure len stays above zero the whole time.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Noticed in my PowerPC Linux VM:
cc1: warnings being treated as errors
dload.c:45: error: 'get_filename' defined but not used
make[3]: *** [dload.lo] Error 1
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is a fairly valid assumption at this point, or at least as good of
one as assuming packages all have names.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is a bit of a mess, due to the fact that we have a progress meter
running. It is also ironic that we are in the midst of a method named
"commit" when we haven't done a damn thing yet, and can still fail hard
if either a checksum or signature is invalid or unrecognized.
Adapt the former test_md5sum method to be invoked for any of the various
failure types, which at least gives the user some indication of what
packages are failing. A second patch will be needed to actually show
worthwhile error codes, but this is going to involve modifying the
actual data passed with the callback.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This moves us toward staring translations for the 4.0.0 release,
although this should not be interpreted as a string freeze by any means.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is standard procedure elsewhere and cuts down on translations that
won't be seen (and we don't want if we need English debug output
anyway).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/dload.c
lib/libalpm/po/fi.po
lib/libalpm/po/libalpm.pot
po/de.po
po/fi.po
src/pacman/po/pacman.pot
src/pacman/util.c
|
|
If we are missing a local database file, we get repeated messages over
and over telling us the same thing, rather than being sane and erroring
only once. This package adds an INFRQ_ERROR level that is added to the
mask if we encounter any errors on a local_db_read() operation, and
short circuits future calls if found in the value. This fixes FS#25313.
Note that this does not make any behavior changes other than suppressing
error messages and repeated code calls to failure cases; we still have
more to do in the "local database is hosed" department.
Also make a small update to the wrong but unused flags set in
be_package; using INFRQ_ALL there was not totally correct.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We did a good job checking this in add.c, but not necessarily anywhere
else. Fix this up by adding checks into dload.c, remove.c, and conf.c in
the frontend. Also add loggers where appropriate and make the message
syntax more consistent.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We don't write with extra or unknown whitespace, so there is little
reason for us to trim it when reading either. This also fixes the
hopefully never encountered "paths that start or end with spaces" issue,
for which two pactests have been added. The tests also contain other
evil characters that we have encountered before and handle just fine,
but it doesn't hurt to ensure we don't break such support in the future.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This ensures we are actually making correct use of the information gpgme
is returning to us. Marginal being allowed was obvious before, but
Unknown should deal with trust level, and not the presence or lack
thereof of a public key to validate the signature with.
Return status and validity information in two separate values so check
methods and the frontend can use them independently. For now, we treat
expired keys as valid, while expired signatures are invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Immediately jump to the cleanup code after setting the return code to -1
in case rename() fails. Otherwise, it will be reset to 0 right after we
leave the if branch.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This accomplishes quite a few things with one rather invasive change.
1. Iteration is much more performant, due to a reduction in pointer
chasing and linear item access.
2. Data structures are smaller- we no longer have the overhead of the
linked list as the file struts are now laid out consecutively in
memory.
3. Memory allocation has been massively reworked. Before, we would
allocate three different pieces of memory per file item- the list
struct, the file struct, and the copied filename. What this resulted
in was massive fragmentation of memory when loading filelists since
the memory allocator had to leave holes all over the place. The new
situation here now removes the need for any list item allocation;
allocates the file structs in contiguous memory (and reallocs as
necessary), leaving only the strings as individually allocated. Tests
using valgrind (massif) show some pretty significant memory
reductions on the worst case `pacman -Ql > /dev/null` (366387 files
on my machine):
Before:
Peak heap: 54,416,024 B
Useful heap: 36,840,692 B
Extra heap: 17,575,332 B
After:
Peak heap: 38,004,352 B
Useful heap: 28,101,347 B
Extra heap: 9,903,005 B
Several small helper methods have been introduced, including a list to
array conversion helper as well as a filelist merge sort that works
directly on arrays.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As noted by Allan, we failed pretty hard if gpgme was compiled out. With
these changes, only sign001.py fails. This can/will be fixed later once
we beef up the test suite with more signing tests anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we can't read the keyring, gpgme will output confusing debug
information and fail to verify the signature, so we should log some
debug information.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is a wrapper function for access() which logs some debug
information and eases handling in case of split directory and filename.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This addresses FS#25141. We shouldn't remove every empty directory we
come across during the removal process unless it is truly not known to
any other package. This will prevent removal of essential directories
such as '/var/lock/'.
This is accomplished by first checking the empty/non-empty status of a
directory, which was previously done implicitly by calling rmdir() and
ignoring errors. We do this to avoid the next (new) check in most cases,
which is to look at all local packages to see if the to-be-removed
directory is present in another packages' filelist. If we do not find it
anywhere, then we remove it, else we keep the file around.
The pactest has been updated to test more cases, as well as finding a
flaw in the original expected to fail case- we need separate DIR and
FILE based EXIST rules.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This can only ever operate on the local database, and a local package at
that. Change the function signature to take a handle and package object,
add the relevant asserts, and ensure the frontend can detect the package
not found condition when finding packages to pass to this method.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The bulk of this commit is adding new tests to ensure the new behavior
works without disrupting old behavior. This is a relatively sane maneuver
when a package adds a conf file (e.g. '/etc/mercurial/hgrc') that was
not previously in the package, but it is placed in the backup array. In
essence, we can treat the existing file as having always been a part of
the package and do our normal compare/install as pacnew logic checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This code duplication has always been a rather clumsy casuality of
fixing some past upgrade issues. Unify the removal code across upgrade
and remove operations into a new _alpm_remove_single_package() method
wihch makes it very clear how we handle upgrade and remove differently,
via several conditionals on newpkg.
This commit highlights interesting behavior such as the fact that the
implicit removal in every package upgrade never gets transaction events
or progress callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes "error: no previous prototype for '_alpm_raw_cmp'
[-Werror=missing-prototypes]" warnings, and also prevents someone from
getting the prototypes and functions out of sync.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This transitional struct becomes delicious noms for dload_payload.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Restore some sanity to the number of arguments passed to _alpm_download
and curl_download_internal.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This means creating a new struct which can pass more descriptive data
from the back end sync functions to the downloader. In particular, we're
interested in the download size read from the sync DB. When the remote
server reports a size larger than this (via a content-length header),
abort the transfer.
In cases where the size is unknown, we set a hard upper limit of:
* 25MiB for a sync DB
* 16KiB for a signature
For reference, 25MiB is more than twice the size of all of the current
binary repos (with files) combined, and 16KiB is a truly gargantuan
signature.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
URLs might end with a slash and follow redirects, or could be a
generated by a script such as /getpkg.php?id=12345. In both cases, we
may have a better filename that we can write to, taken from either
content-disposition header, or the effective URL.
Specific to the first case, we write to a temporary file of the format
'alpmtmp.XXXXXX', where XXXXXX is randomized by mkstemp(3). Since this
is a randomly generated file, we cannot support resuming and the file is
unlinked in the event of an interrupt.
We also run into the possibility of changing out the filename from under
alpm on a -U operation, so callers of _alpm_download can optionally pass
a pointer to a *char to be filled in by curl_download_internal with the
actual filename we wrote to. Any sync operation will pass a NULL pointer
here, as we rely on specific names for packages from a mirror.
Fixes FS#22645.
Signed-off-by: Dave Reisner <d@falconindy.com>
|
|
The supposed safety blanket of this function is better handled by
explicit length checking and usages of strlen() on known NULL-terminated
strings rather than hoping things fit in a buffer. We also have no need
to fully fill a PATH_MAX length variable with NULLs every time as long
as a single terminating byte is there. Remove usages of it by using
strcpy() or memcpy() as appropriate, after doing length checks via
strlen().
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
We'll need these functions to do locale agnostic and case insensitive
string comparisons.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
We can readily detect the first node in a list by checking if
node->prev->next is NULL. So there is no need to pass the head
of the list to this function and its prototype now looks like
all the other item accessors.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The only thing this accessor did was remove the const qualifier
given our entire list implementation requires passing around the
head anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
They are placeholders, but important for things like trying to re-sync a
database missing a signature. By using the alpm_db_validity() method at
the right time, a client can take the appropriate action with these
invalid databases as necessary.
In pacman's case, we disallow just about anything that involves looking
at a sync database outside of an '-Sy' operation (although we do check
the validity immediately after). A few operations are still permitted-
'-Q' ops that don't touch sync databases as well as '-R'.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Show output in -Qip for each package signature, which includes the UID
string from the key ("Joe User <joe@example.com>") and the validity of
said key. Example output:
Signatures : Valid signature from "Dan McGee <dpmcgee@gmail.com>"
Unknown signature from "<Key Unknown>"
Invalid signature from "Dan McGee <dpmcgee@gmail.com>"
Also add a backend alpm_sigresult_cleanup() function since memory
allocation took place on this object, and we need some way of freeing
it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The error code is in fact a bitmask value of an error code and an error
source, so use the proper function to get only the relevant bits. For
the no error case, this shouldn't ever matter, but it bit me when I was
trying to compare the error code to other values and wondered why it
wasn't working, so set a good example.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This gives us more granularity than the former Never/Optional/Always
trifecta. The frontend still uses these values temporarily but that will
be changed in a future patch.
* Use 'siglevel' consistenly in method names, 'level' as variable name
* The level becomes an enum bitmask value for flexibility
* Signature check methods now return a array of status codes rather than
a simple integer success/failure value. This allows callers to
determine whether things such as an unknown signature are valid.
* Specific signature error codes mostly disappear in favor of the above
returned status code; pm_errno is now set only to PKG_INVALID_SIG or
DB_INVALID_SIG as appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/be_local.c
lib/libalpm/be_package.c
lib/libalpm/conflict.c
lib/libalpm/diskspace.c
lib/libalpm/dload.c
lib/libalpm/remove.c
|
|
We can take advantage of a few things on our new and improved filelist
in this code.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now that the filelists capture mode and size information, we can read
the data from there and prevent having to loop through and uncompress
every archive to check required diskspace usage.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
