| Age | Commit message (Collapse) | Author |
|---|
|
Although technically correct, this results in my system taking ~30 seconds
to resolve all filelists when removing a package that has a directory not
owned by any package. The check for if any package own the empty directory
is a rare enough occurance, and it will be even rarer when that directory
has a directory symlink in its path, so just revert this at this stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
alpm_filelist_contains was being used to search for resolved paths, but
searching in the unresolved paths, causing it to miss matches. We
always search unresolved paths and search the resolved paths if
available because _alpm_filelist_resolve is not public and requires
a context handle, so it can't be called from alpm_filelist_contains.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Arch Linux typically runs into this with /sys when upgrading the
filesystem package in build chroots, but LXC users might also run into
this, since their /sys is shared from the host and must, for security
reasons, be mounted RO.
I've neglected to add any tests for this because they would require root
in order to run. Current tests all pass with this patch and I've
confirmed the desired behavior in a VM. Incidentally, the first hunk of
this patch (skipping can_remove_file checks for directories) resolves the
case of API mountpoints being removed since they eventually fall into
unlink_file and fail with "contains files". However, this patch should
still be the Right Thing To Do™, as we can't possibly remove a directory
that is also a mountpoint.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
[Allan] Do not skip checking if directories can be removed. Instead test
if directories are mountpoints in can_remove_file.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
prefix defaults to "UNKOWN" if null or an empty string is provided.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Teach pacman to save backup files with extension .pacsave.n, where n is a
positive integer. The current backup file shall be saved as <name>.pacsave,
while existing .pacsave.n files will be renamed to <name>.pacsave.n+1
Example:
1. You have subversion installed in your local repo. /etc/conf.d/svnserve
is a file to be backed up. It contains local modifications
2. You remove subversion from your repo. /etc/conf.d/svnserve is backed up as
/etc/conf.d/svnserve.pacsave
2. You install subversion again
3. You edit /etc/conf.d/svnserve
4. You remove subversion. The existing /etc/conf.d/svnserve.pacsave is renamed
to /etc/conf.d/svnserve.pacsave.1 and /etc/conf.d/svnserve is backed up as
/etc/conf.d/svnserve.pacsave
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Rebased from original email and adjusted for util-common usage.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This function is particularly useful, so make it public.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When a package is being removed, provide a notification (via a callback)
if any local package requires it as an optdepend.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We have a few of these and might as well gather them together. This also
cleans up the code a bit by using an enum instead of integer values, as
well as makes a "search for file in filelist" function public so
frontends can do better than straight linear search of the filelists.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/diskspace.c
src/pacman/util.h
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/signing.c
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We don't need two log messages back-to-back about the same thing here.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now that filelist arrays know their own size, we don't need to do the
bookkeeping we used to do when they were linked lists. Remove some of
the counter variables and use math instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Extract the actual unlinking of files into a new method, which
eliminates a goto used for flow control. Also fix up a few small issues
in the code:
* Unnecessary (unsigned long) cast, use '%zd' instead
* Total up errors returned from unlink_file calls and return to caller
* Be consistent with scriptlets- we run pre_remove on dbonly, so we
should also run post_remove. Both can be disabled by way of the
--noscriptlet argument.
* Don't pass an invalid pointer to oldpkg to the event callbacks;
instead call the callback before we free the object.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Ensures that config.h is always ordered correctly (first) in the
includes. Also means that new source files get this for free without
having to remember to add it.
We opt for -imacros over -include as its more portable, and the
added constraint by -imacros doesn't bother us for config.h.
This also touches the HACKING file to remove the explicit mention of
config.h as part of the includes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is work originally provided by Sascha Kruse on FS#20360 with only
minor adjustments to the implementation. It's been expanded to cover:
NoUpgrade, NoExtract, IgnorePkg, IgnoreGroup.
Adds tests ignore008, sync139, sync502, and sync503.
Also satisfies FS#18988.
Original-work-by: Sascha Kruse <knopwob@googlemail.com>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
We can take a large shortcut here that saves us a lot of time,
especially when upgrading packages with lots of directories. Obviously
iterating the full file list of every single package to determine if
this directory was present in any other package can take quite some time
on a system with many packages installed. We don't need to remove a
directory at all if we are upgrading a package and the version we are
moving to still had the directory.
Also make a small optimization on the package comparsion- we really only
care about equality here, not the result of the compare, so we can
shortcut using our name_hash.
What kind of benefit does this give us? Oh, only a reduction from 295.7
million to 1.4 million strcmp() calls (99.5% fewer) during a
`pacman -S linux libreoffice-common` operation.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Expose the current static get_pkgpath() function internally to the rest
of the library as _alpm_local_db_pkgpath(). This allows use of this
convenience function in add.c and remove.c when forming the path to the
scriptlet location.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add an is_archive parameter to reduce the amount of black magic going
on. Rework to use fewer PATH_MAX sized local variables, and simplify
some of the logic where appropriate in both this function and in the
callers where duplicate calls can be replaced by some conditional
parameter code.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is definitely not in the normal hot path, so we can afford to do
some temporary heap allocation here.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
1. Don't run it if something failed in package removal- this mirrors
what we already do in sync transactions.
2. Don't run it if we are invoking it for the replaces removal bit of a
sync transaction- it doesn't make sense to run ldconfig halfway through
a sync install; we should only run it once at the end.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We add them to this list with the root path not appended; we should be
searching for them this way as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Put all the callback stuff in alpm.h in one spot, and make the following
renames for clarity with the new structure:
ALPM_TRANS_EVT_* --> ALPM_EVENT_*
ALPM_TRANS_CONV_* --> ALPM_QUESTION_*
ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_*
alpm_option_get_convcb() --> alpm_option_get_questioncb()
alpm_option_set_convcb() --> alpm_option_set_questioncb()
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was just disgusting before, unnecessary to limit these to only
usage in a transaction. Still a lot of more room for cleanup but we'll
start by attaching them to the handle rather than the transaction we may
or may not even want to use these callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This changes the signature of _alpm_pkg_dup() to return an integer error
code and provide the new package in a passed pointer argument. All
callers are now more robust with checking the return value of this
function to ensure a fatal error did not occur.
We allow load failures to proceed as otherwise we have a chicken and egg
problem- if a 'desc' local database entry is missing, the best way of
restoring said file is `pacman -Sf --dbonly packagename`. This patch
fixes a segfault that was occurring in this case.
Fixes the segfault reported in FS#25667.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The functions alpm_db_get_name(), alpm_pkg_get_name(), and
alpm_pkg_get_version() are not necessary at all, so remove the calling
and indirection when used in the backend, which makes things slightly
more efficient and reduces code size.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We did a good job checking this in add.c, but not necessarily anywhere
else. Fix this up by adding checks into dload.c, remove.c, and conf.c in
the frontend. Also add loggers where appropriate and make the message
syntax more consistent.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This accomplishes quite a few things with one rather invasive change.
1. Iteration is much more performant, due to a reduction in pointer
chasing and linear item access.
2. Data structures are smaller- we no longer have the overhead of the
linked list as the file struts are now laid out consecutively in
memory.
3. Memory allocation has been massively reworked. Before, we would
allocate three different pieces of memory per file item- the list
struct, the file struct, and the copied filename. What this resulted
in was massive fragmentation of memory when loading filelists since
the memory allocator had to leave holes all over the place. The new
situation here now removes the need for any list item allocation;
allocates the file structs in contiguous memory (and reallocs as
necessary), leaving only the strings as individually allocated. Tests
using valgrind (massif) show some pretty significant memory
reductions on the worst case `pacman -Ql > /dev/null` (366387 files
on my machine):
Before:
Peak heap: 54,416,024 B
Useful heap: 36,840,692 B
Extra heap: 17,575,332 B
After:
Peak heap: 38,004,352 B
Useful heap: 28,101,347 B
Extra heap: 9,903,005 B
Several small helper methods have been introduced, including a list to
array conversion helper as well as a filelist merge sort that works
directly on arrays.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This addresses FS#25141. We shouldn't remove every empty directory we
come across during the removal process unless it is truly not known to
any other package. This will prevent removal of essential directories
such as '/var/lock/'.
This is accomplished by first checking the empty/non-empty status of a
directory, which was previously done implicitly by calling rmdir() and
ignoring errors. We do this to avoid the next (new) check in most cases,
which is to look at all local packages to see if the to-be-removed
directory is present in another packages' filelist. If we do not find it
anywhere, then we remove it, else we keep the file around.
The pactest has been updated to test more cases, as well as finding a
flaw in the original expected to fail case- we need separate DIR and
FILE based EXIST rules.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The bulk of this commit is adding new tests to ensure the new behavior
works without disrupting old behavior. This is a relatively sane maneuver
when a package adds a conf file (e.g. '/etc/mercurial/hgrc') that was
not previously in the package, but it is placed in the backup array. In
essence, we can treat the existing file as having always been a part of
the package and do our normal compare/install as pacnew logic checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This code duplication has always been a rather clumsy casuality of
fixing some past upgrade issues. Unify the removal code across upgrade
and remove operations into a new _alpm_remove_single_package() method
wihch makes it very clear how we handle upgrade and remove differently,
via several conditionals on newpkg.
This commit highlights interesting behavior such as the fact that the
implicit removal in every package upgrade never gets transaction events
or progress callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We can readily detect the first node in a list by checking if
node->prev->next is NULL. So there is no need to pass the head
of the list to this function and its prototype now looks like
all the other item accessors.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/be_local.c
lib/libalpm/be_package.c
lib/libalpm/conflict.c
lib/libalpm/diskspace.c
lib/libalpm/dload.c
lib/libalpm/remove.c
|
|
This allows us to capture size and mode data when building filelists
from package files. Future patches will take advantage of this newly
available information, and frontends can use it as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This saves replicating the potentially large list of files in a package
that is being removed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
