summaryrefslogtreecommitdiff
path: root/lib/libalpm/dload.c
AgeCommit message (Collapse)Author
2011-07-03Merge remote-tracking branch 'allan/ALPM'Dan McGee
Conflicts: lib/libalpm/be_local.c lib/libalpm/be_package.c lib/libalpm/conflict.c lib/libalpm/diskspace.c lib/libalpm/dload.c lib/libalpm/remove.c
2011-07-03Fix debug logger without a newlineDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-02Prefix _alpm_errno_t members with ALPMAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-07-02Prefix alpm_loglevel_t members with ALPMAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-30Fix a few warnings pointed out via clang scan-buildDan McGee
Some of these are legit (the backup hash NULL checks), while others are either extemely unlikely or just impossible for the static code analysis to prove, but are worth adding anyway because they have little overhead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-28Rename pmhandle_t to alpm_handle_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-27Fix several -Wshadow warningsDan McGee
Only one of these looked like a real red flag, in find_requiredby(), but it doesn't hurt to fix several of them up anyway. Unfortunately, we can't turn this on universally due to things like the sync(), remove(), etc. builtins which we often use as variable names. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-20Documented _alpm_download()Kerrick Staley
Documented the _alpm_download() function in dload.c Signed-off-by: Kerrick Staley <mail@kerrickstaley.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Ensure handle is valid and pm_errno is reset when calling into APIDan McGee
We didn't do due diligence before and ensure prior pm_errno values weren't influencing what happened in further ALPM calls. I observed one case of early setup code setting pm_errno to PM_ERR_WRONG_ARGS and that flag persisting the entire time we were calling library code. Add a new CHECK_HANDLE() macro that does two things: 1) ensures the handle variable passed to it is non-NULL and 2) clears any existing pm_errno flag set on the handle. This macro can replace many places we used the ASSERT(handle != NULL, ...) pattern before. Several other other places only need a simple 'set to zero' of the pm_errno field. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Switch all logging to use handle directlyDan McGee
This is the last user of our global handle object. Once again the diff is large but the functional changes are not. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Move pm_errno onto the handleDan McGee
This involves some serious changes and a very messy diff, unfortunately. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09Require handle argument to all alpm_option_(get|set)_*() methodsDan McGee
This requires a lot of line changes, but not many functional changes as more often than not our handle variable is already available in some fashion. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Push down extern handle variable to files that need itDan McGee
This will make the patching process less invasive as we start to remove this variable from all source files. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Remove ALPM_LOG_FUNC macroDan McGee
The usefulness of this is rather limited due to it not being compiled into production builds. When you do choose to see the output, it is often overwhelming and not helpful. The best bet is to use a debugger and/or well-placed fprintf() statements. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-01lib/dload.c: remove assumption in continuation logicDave Reisner
Callers to curl_download_internal now tell us if its okay to continue a transfer, so obey this instead of using a heuristic. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-01dload: abort transfer on CURLOPT_LOW_SPEED_LIMITDave Reisner
If a connection drops below 1kb/s for 10s, curl will kill the transfer and we'll report failure. This is the average transfer speed over the delta defined by CURLOPT_LOW_SPEED_TIME, so setting a low value here shouldn't bother folks using 14.4k dial-up. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-05-04dload: make sure we never print a bogus error bufferDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-05-04Deal with unused function parameters correctlyAllan McRae
This started off removing the "(void)foo" hacks to work around unused function parameters and ended up fixing every warning generated by -Wunused-parameter. Dan: rename to UNUSED. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-22libalpm/dload: major refactor of signature downloadingDan McGee
There's a lot of related moving parts here: * Iteration through mirrors is moved back to the calling functions. This allows removal of _alpm_download_single_file and _alpm_download_files. * The download function gets a few more arguments to influence behavior. This allows several different scenarios to customize behavior: - database - database signature (req'd and optional) - package - package via direct URL - package signature via direct URL (req'd and optional) * For databases, we need signatures from the same mirror, so structure the code accordingly. Some-inspiration-from: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-22libalpm/dload: add allow_resume and reorder error checksDan McGee
The allow_resume is the start of the fix to the "don't ever resume database downloads" problem, as well as being useful for '.sig' downloads as well. For now, we say "always allow resume", but this will eventually get pushed down as necessary. Error checks are reworked in order to correctly error out when a file is not found on the remote end and reports 0 bytes downloaded. In addition, the two error messages printed are now different as one reports a more specific error message provided via the cURL error buffer. Some example output from an -Sy run with [testing], [community], [community2], [eee], and [nonexistant] defined as repos. [community2] and [nonexistant] are both invalid, one using FTP and one using HTTP. :: Synchronizing package databases... testing is up to date community is up to date error: failed retrieving file 'community2.db' from ftp.archlinux.org : Given file does not exist error: failed to update community2 (FTP: couldn't retrieve (RETR failed) the specified file) eee is up to date error: failed retrieving file 'nonexistant.db' from code.toofishes.net : The requested URL returned error: 404 error: failed to update nonexistant (HTTP response code said error) Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-22libalpm/dload: const and static correctnessDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20syntax: if/while statements should have no trailing spaceDan McGee
This is the standard, and we have had a few of these introduced lately that should not be here. Done with: find -name '*.c' | xargs sed -i -e 's#if (#if(#g' find -name '*.c' | xargs sed -i -e 's#while (#while(#g' Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20style cleanup: cast as (type *) not (type*)Dave Reisner
Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-15Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/alpm.h lib/libalpm/trans.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-09Move documentation for public package function to alpm.hRémy Oudompheng
2011-04-02dload: dont forget to initialize open_modeXavier Chantry
That's a funny one, building with optimization levels (with both gcc and clang) caused open_mode to always be set to "ab", which worked. This was spotted both with clang-analyzer, and by Jakob who reported a segfault as he was using an un-optimized build. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-27lib/dload: abstract out helper function to set utimesDave Reisner
This greatly simplifies the cleanup fallthrough in our download function and we'll be able to reuse this for signatures. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-27lib/dload: remove proxy debug outputDave Reisner
Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-27lib/dload: code simplificationDave Reisner
Based on the fact that localf always points to the same file, there's no need to code in multiple fopen calls with varying results. Instead, track the desired file open mode and make a single call to fopen. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-27lib/dload: merge get_{destfile,tempfile} into get_fullpathDave Reisner
Create a more general function that allows appending a suffix to a filepath. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-27pacman/pacman.c: fix setting of useragent stringDave Reisner
libcurl doesn't natively honor the HTTP_USER_AGENT environment variable. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-27lib/dload: pass a struct with filename and size to curl_progressDave Reisner
This lets us determine the real size of the file on disk so that we can properly bump the progress bar when we're resuming a download. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23lib/dload.c: Check for dlcb == NULL earlierDave Reisner
Our curl callback does a whole lot of work for nothing if the front end never defined a callback to receive the data we'd calculate for it. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23lib/dload.c: don't use deprecated curl symbolsDave Reisner
CURLINFO_HTTP_CODE is deprecated in favor of CURLINFO_RESPONSE_CODE. Both yield the same values. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23lib/dload.c: don't request compressed transportDave Reisner
The files we transfer are generally compressed already, so this just adds unnecessary overhead. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23lib/dload.c: Fix progress callback issues on downloadDave Reisner
Use a static variable to effectively track the initialization state of the progress callback via the last byte amount reported as downloaded by libcurl. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23lib/dload.c: fix compiler warnings generated by -Wfloat-equalDave Reisner
* introduces new macro in util.h (DOUBLE_EQ) for properly comparing floating point values Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-21Don't initialize progress to zero before calling curl_easy_perform().Lukas Fleischer
Drawing progress bars before calling curl_easy_perform() is needless as the curl progress callback is called with zero progress before actually downloading the file anyways. Fixes display of "0%" progress bars when sync'ing package databases that are already up to date. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-21Ensure dlcb is defined before calling itDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-20Style change: return(x) --> return xDan McGee
This was discussed and more or less agreed upon on the mailing list. A huge checkin, but if we just do it and let people adjust the pain will end soon enough. Rebasing should be relatively straighforward for anyone that sees conflicts; just be sure you use the new return style if possible. The following semantic patch was used to do the change, along with some hand-massaging in order to preserve parenthesis where appropriate: The semantic match that finds this problem is as follows, although some hand-massaging was done in order to keep parenthesis where appropriate: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a; @@ - return(a); + return a; // </smpl> A macros_file was also provided with the following content: Additional steps taken, mainly for ASSERT() macros: $ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c $ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-20lib/dload.c: fix opening braces to conform with coding styleDave Reisner
Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-20lib/dload.c: remove lingering libfetch specific headersDave Reisner
Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-17Fix triple progress bars on downloadDave Reisner
Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-09Remove all traces of libfetchDave Reisner
Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09dload: temp patch to allow curl/fetch coexistanceDave Reisner
this is just some debuggery to allow pacman to operate with both fetch and curl at the same time. use the PACMANDL variable to control which library is used. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09dload.c: add curl_download_internalDave Reisner
This is a feature complete re-implementation of the fetch based internal downloader, with a few improvements: * support for SSL * gzip and deflate compression on HTTP connections * reuses a single connection over the entire session for lower resource usage. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09share code between libfetch and libcurlDave Reisner
no actual code changes here. change preprocessor logic to include get_tempfile, get_destfile, signal handler enum, and the interrupt handler logic when either HAVE_LIBCURL or HAVE_LIBFETCH are defined. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09prefix fetch based functions with fetch_Dave Reisner
Do this in preparation for implementing similar curl based functionality. We want the ability to test these side by side. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09add curl to alpm initialization and teardown routinesDave Reisner
Signed-off-by: Dave Reisner <d@falconindy.com>
2011-02-04Add comment about download file resolutionDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-25 11:39:17 +0000