| Age | Commit message (Collapse) | Author |
|---|
|
This allows a `make -j4 check` invocation to actually run in parallel,
even though 95% of our test suite time is currently dominated by
pactest. It also allows running something like `make test-vercmp`.
Also, add some targets to the .PHONY list that belong in it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
doc/Makefile.am
|
|
Commit 43cad9c8 made the building of all docs depend on the Makefile.
However, the Makefile is generated after running ./configure so is
always newer than any pregenerated docs. This means that people
building from released pacman tarballs are forced to rebuild the
docs (and thus have asciidoc installed). That defeats the purpose
of prebuilding the documentation. Have the documentatin depends on
Makefile.am instead as this is probably what was intended.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This converts our script generation to use the built-in AM_V_GEN macro,
which honors the V= setting passed to make and allows one to see the
full command if they truly desire. The AM_V_at macro is also used in
place of an explicit @ so verbose-mode compiles show all commands being
run.
We can also use these two macros in doc generation to quiet it down to
the level we expect.
Other minor changes:
* a pointless test call is removed in test/pacman/tests/
* sed is used instead of dos2unix as we depend on it anyway
* consecutive chmod calls are reduced to a single call (e.g., '+x,a-x')
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Make all docs depend on Makefile; if we change flags here we want them
rebuilt.
* Add explicit filenames to .gitignore so we can add our own CSS
override file, and add an asciidoc-override.css resource.
* Adjust a few asciidoc options when generating HTML.
* Remove asciidoc-manpage.css; apparantly this doesn't exist anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes build errors when performing a manual install straight to a
filesystem where the files already exist.
Reported-by: Sergej Pupykin <ml@sergej.pp.ru>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These are equivalent. Use the autoconf macro for consistency.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This applies to the repo-remove man page as well as the script itself.
Yes Dan, I ran distcheck afterwards.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Fix failure at man page generation when building outside the source tree.
There may still be issues with other documentation types...
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Ray Kohler <ataraxia937@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
dirty indicates if the repo has uncommited changes or not when building,
so dont hardcode this info.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This includes info on version comparison that is very similar to the stuff
in the pacman manpage, but also a few vercmp examples, the return values,
and other fun stuff.
Also update the version comparison stuff in the pacman manpage.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/sync.c
test/pacman/tests/ignore007.py
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This applies to contrib/ files, our scripts, and the documentation.
Dan: fix 'make clean' in contrib/ directory.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will allow me to be not quite as lazy in getting website changes out
to the Arch Linux server by making it trivial to get everything packaged up
and working correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 5fe41df8 broke `make distcheck` pretty badly for the doc directory.
Looking at what this commit was trying to accomplish, it make sense to
revert a lot of the build system changes and just simplify what we are
showing in the man page anyway- an example, not exactly how it is configured
on your system.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As Allan pointed out, this actually ships with pacman (at least with Arch)
and not necessarily with ABS or any other package. Also fix the language
dealing with the prototype install files.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The newly added variables STRIP_BINARIES, STRIP_SHARED and STRIP_STATIC,
that are set in makepkg.conf, specify the strip options used on binaries
and shared and static libraries.
In addition, files are now stripped more aggressively by default.
Implements FS#13592 the way it was suggested by Allan in the comments.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
repo-remove.8 is generated with Makefile but is not removed on clean.
This patch add it to list of untracked autoconf files.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Move some of our documentation files, even though they aren't manpages, to
the doc/ directory. This allows the new 'html' make target to manage them.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As reported here, man pages could no longer be built :
http://archlinux.org/pipermail/pacman-dev/2008-December/007726.html
I found the explanation here :
http://www.methods.co.nz/asciidoc/source-highlight-filter.html
"If you use a2x(1) to generate PDF you need to include the --no-xmllint
option to suppress xmllint(1) checking — the programlisting language
attribute (required by the dblatex source highlighter) is not part of the
DocBook 4 specification (but it is in the newer DocBook 5 specification)."
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I mess this up more often than not, and maybe this will do the trick. Remove
the --enable-asciidoc option as it has been superseded by the --disable-doc
option in usefulness. If you want to skip building docs, you skip building
all docs which is much easier when it comes to ensuring the make 'dist' and
'distcheck' targets will always build the manpages and always build the most
up to date manpages.
Developers shouldn't be affected in their normal builds, nor should end
users of the source tarball.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case manlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 012f7939784358b02726c169543aa99436439335 was a bit misguided in its
thinking, and resulted in a package built without asciidoc enabled not
installing the manpages to the system on a 'make install' operation. Fix
this behavior by making manpages required in a normal build, and in order to
disable their existence, the '--disable-doc' option must be used.
Hopefully this solves manpage issues for both developers and package
builders while allowing as much flexibility as possible.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We really don't need it since it is just links. However, we do need to figure
out how to get our old links to show up right.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had way too much going on with the Doxygen manpage generation. Clean it
up quite a bit by removing directory manpages, using relative paths, not
having a manpage for every single alpm function, and ensuring internal
functions are not documented publicly.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we don't have asciidoc installed or enabled, we should still have a
successful make. However, we want to ensure 'make dist' fails without
asciidoc. This commit should ensure this.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Include manpages when we ship a package tarball, and allow them to be
generated by the end user if they want by using the --enable-asciidoc option
to ./configure. This will allow us to maintain manpages in an easier to modify
format while still keeping the make dependencies to a minimum.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We still need some work here- we should have a repo-remove manpage link
to this one, and we should not have to struggle with asciidoc formatting
to get it to work like any other multiple-command manpage works.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Fix up the target so we rebuild the manpages when we edit the corresponding
text file.
* Add vim modelines to all of the asciidoc files ensureing the right syntax
highlighting is used and we have expandtabs turned off.
* Start making a few small changes to PKGBUILD.5 to make it pretty in both
HTML and manpage format output.
* Fix the manlink macro to include the manpage section in the link.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
|
|
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
|
|
If footer.txt is updated, we need to regenerate the manpages, this little
fix should do this.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
|
|
Add some asciidoc generation stuff to the doc/ Makefile.am so we can get
some manpages up and working. Add necessary stuff to gitignore, and check
in the asciidoc.conf file along with the footer for all of the manpages.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Instead of doing the doxygen work in the libalpm/ dir, do it with the rest
of the docs in the doc/ dir.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Add vim modeline to Makefile.am and configure.ac
* Fix white space in Makefile.am and configure.ac
* Add contrib/wget-xdelta.sh to EXTRA_DIST in Makefile.am
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
