summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-12-05remove SIG_IGN check when setting signal handlerAndrew Gregory
Our signal handler provides a way to gracefully interrupt a transaction and should always be set. The check appears to have originally been copied directly from the glibc manual. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05do not catch SIGTERMAndrew Gregory
On SIGTERM pacman was exiting immediately, even in the middle of a transaction. In this case we should leave the lock file in place as an indication that the database may not be in a consistent state. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05pacman: exit without memory cleanup on signalsAndrew Gregory
Memory allocation/deallocation functions are not safe to call from signal handlers. Just remove the lock file if there is one and exit immediately. Fixes: FS#46375, FS#45995, FS#47011 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05add and expose alpm_unlockAndrew Gregory
alpm_unlock is a limited version of alpm_release that does nothing but the actual unlinking of the lock file and is therefore safe to call from signal handlers. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05handle_unlock: return 0 if lockfile == NULLAndrew Gregory
Returning -1 is useless since we don't provide any way to determine why it failed. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05skip conflicts resolved by file replacementAndrew Gregory
When replacing a file with a directory, any files inside the new directory cannot possibly exist on the filesystem and can be skipped. This allows cross-package symlink-to-directory transitions when there are files with the same name under both the symlinked directory and the new directory. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05always unlink files before extractionAndrew Gregory
libarchive will not extract a directory over an existing directory symlink, making it impossible to replace a symlink with a directory across packages. Adding the ARCHIVE_EXTRACT_UNLINK and ARCHIVE_EXTRACT_SECURE_SYMLINKS causes libarchive to unlink the existing symlink and prevents it from extracting any paths that contain a symlink, which we should not be doing anyway. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05Detect potential conflict when symlink to directory is changing to directoryAllan McRae
When a symlink to a directory is changing to a directory, any package file inside the new directory can create an unexpected conflict with the filesystem. Reported by Neofytos and Luca from Chakra. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-04Add large file support CFLAGS to pkgconfig fileAllan McRae
Large file support is enabled by our configure script as required. If anything linking to libalpm does not also define large file support, there will be differences in the size of off_t which are not caught until runtime. Add the required CFLAGS to the pkg-config file so that users of libalpm know what flags are required. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-29run_chroot: always clear script output bufferAndrew Gregory
If the script output does not end in a newline there could still be data in the buffer after the poll loop. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28pacdiff: do not require DIFFPROG for -o/--outputEvangelos Foutras
Signed-off-by: Evangelos Foutras <evangelos@foutrelis.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28hooks: pass matched targets to hooksAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28allow specifying input to scriptletsAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28allow arguments in hook Exec fieldsAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28tap.py: replace newlines with escape sequenceAndrew Gregory
Newlines clutter tap output and can potentially confuse TAP parsers. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28pmrule.py: add FILE_CONTENTS ruleAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23lint_pkgbuild/variable: increase robustnessAllan McRae
Approach the detection of variables of the wrong type using an approach similar to that used for construction of .SRCINFO files. While doing silly things in bash could still result in false negatives, this approach should be very robust to generatinf false positives results. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23makepkg: merge arch dependent variables after PKGBUILD lintingAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23makepkg: remove obsolete commentAllan McRae
Behaviour changed in commit dce82f9d. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23lint_pkgbuild: explicitly return valueAllan McRae
Set the return value to be local and always explictly returns it. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-11Refactor strtrim functionSilvan Jegen
Signed-off-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-11Use correct format specifiersRikard Falkeborn
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-05Refactor lint_source to work with earlier versions of BashAaron Campbell
Negative subscripts to indexed arrays are not supported before 4.2. However, since substring expansion works on arrays, we can specify an offset of -1 to be taken relative to one greater than the maximum index of the specified array (see Parameter Expansion section of the bash man page). This works with both Bash 4.1 and 4.2, and 4.1 is already the oldest supported by pacman. Signed-off-by: Aaron Campbell <aaron@monkey.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-04files_search: reset found for each targetAndrew Gregory
Otherwise any invalid targets following a successful match will not get an error message. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-04files_search: free compiled regexAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-04files: do not unnecessarily strdup targetsAndrew Gregory
Targets are never modified so we can just use the original copy. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-04files.c: add vim modelineAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-04add detail to broken dependency errorsAndrew Gregory
The difference between a sync target having an unmet dependency and breaking a dependency for an installed package is a common source of confusion. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-04add --quiet to -FhAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-03ensure realloc has a positive sizeAndrew Gregory
If given size 0 POSIX allows realloc to return a pointer that is not suitable for use. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-03zsh_completion: Handle --ignore/--ignoregroup correctlyMohammad Alsaleh
Completion now works as expected with a comma-separated sequence. Signed-off-by: Mohammad Alsaleh <CE.Mohammad.AlSaleh@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-03package.c: Fix incorrect buffersize and constant-foldingPierre Neidhardt
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-03Add -F --machinereadable optionFlorian Pritz
Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-03Document pacman -FFlorian Pritz
Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-28scripts/po: fix translated file nameAllan McRae
This file was renamed during review and its entry in POTFILES.in was not updated. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-28_alpm_hook_run: check path length before copyingAndrew Gregory
If a hook path equals or exceeds PATH_MAX characters the path will be left unterminated. Pre-calculating the path length also allows us to use the more efficient memcpy over strncpy. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-28makepkg: fix $pkgname element duplicationBenjamin Yates
run_split_packaging did not preserve the $pkgname array correctly, and would create duplicate entries in the list during restore. After restoring the backup (a b c) would become (a b c b c). This probably went unnoticed because during --install, pacman would reconcile the duplicates. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27libmakepkg: fix pkgver checkingAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27add alpm-hooks man pageAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27hook.c: print invalid option nameAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27order hooks by file nameAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27Align titles automatically in information displayPierre Neidhardt
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27Alpm, check for NULL in free-functionsRikard Falkeborn
Also, use FREE() instead of free() in _alpm_backup_free() to set the pointers to NULL. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27zsh_completion: Add --asdeps/--asexplicit to -U optionsMohammad Alsaleh
Signed-off-by: Mohammad Alsaleh <CE.Mohammad.AlSaleh@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27Use ARRAYSIZE macro for non-string array size computationPierre Neidhardt
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-22makepkg: Fix hard-coded debug suffixMohammad Alsaleh
Signed-off-by: Mohammad Alsaleh <CE.Mohammad.AlSaleh@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-21pacsort: clean up if errorRikard Falkeborn
* free memory * close open file Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-21pacsort: don't overwrite memory if realloc failsRikard Falkeborn
That makes it impossible to free it later. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-21pacsort: handle failing list_addRikard Falkeborn
Since it can fail, check the return value. If it fails, we need to free the memory of the object we wanted to add to the list. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-21HACKING: Allow the use of 'sizeof' on valuesPierre Neidhardt
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>