| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add files pactest/tests/Makefile.in , pactest/tests/Makefile
and contrib/Makefile.in , contrib/Makefile to list of cleanup script.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
repo-remove.8 is generated with Makefile but is not removed on clean.
This patch add it to list of untracked autoconf files.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Add an initial pactest/test/.gitignore to exclude sync200.py
that is generated from sync200.py.in
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The bash source command looks in the users PATH for the file to source
before the local directory. This causes issues when someone has a
PKGBUILD somewhere in their path (for unknown some reason...).
Fixes FS#14727.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When making a source package for a SCM PKGBUILD, makepkg should not
update the pkgver/pkgrel. Noted in FS#14456.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This was the only --quiet operation that showed version information; make it
consistent with the rest.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
With --quiet flag, -Ql doesn't print the package name, just lists the files.
I made --quiet documentation up-to-date (I also added -Sgq/-Qgq).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
1) Do not attempt to strip compressed binaries
Original-work-by: Marc - A. Dahlhaus <mad@wol.de>
2) Add "\" in "GPL\'ed" so quote mark does not break source code highlighting
3) Add local to docdir paths in makepkg.conf for consistency
4) Use full path to sed in MacOSX in case users have GNU sed earlier in
path
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Do a sed replacement in-place is not very portable. On Mac OSX and
BSDs, the syntax is "sed -i ''" where as with GNU sed the command is
"sed -i''" or just "sed -i". This patch detects which command should
be used during configure.
Credit to Kevin Barry who researched this issue and provided a patch
to work around this using temporary backup files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Loui Chang <louipc.ist@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes a bug introduced by my previous changes which changes the
behavior of IgnorePkg/IgnoreGroup to allow the user to remove unresolvable
packages from the transaction. The bug is that the target-list was no
longer being consulted first to resolve dependencies, which means that if
two packages in the sync database satisfied a dependency, and the user
explicitly requested one of those two packages in the sync, the other
package was still being pulled in.
A new test was added, sync993.py, to verify the desired behavior.
Signed-off-by: Bryan Ischo <bji-keyword-pacman.3644cb@www.ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Bryan Ischo <bji-keyword-pacman.3644cb@www.ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
pmsyncpkg_t data sructure was removed:
1. pmpkg_t.reason is used instead of pmsyncpkg_t.newreason. (The target
packages come from sync repos, so we can use this field without any
problems. Upgrade transaction also uses this field to store this info.)
2. pmsyncpkg_t.removes was moved to pmpkg_t.removes.
This step requires careful programming, because we don't duplicate packages
when we add them to trans->packages. So we modify sync pkgcache when we
add this transaction-only info to our package. Hence it is important to
free this list when we remove any package from the target list
(remove_unresolvable, remove_conflicts, trans_free), otherwise this could
confuse the new sync transactions (with non-pacman GUI).
Overall, our code became ~100 line shorter, and we can call our helper
functions directly on trans->packages in sync.c, we don't need to maintain
parallel package lists.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
From now on _alpm_db_find_fileconflicts() works with upgrade and remove
target lists (like checkdeps), which makes it transaction independent
(we still need a trans param because of the progressbar). This is a small
step towards the universal transaction. So we call this function directly
from sync.c before commiting the remove transaction. This is much safer,
but we can get false fileconflict error alarms in some tricky cases
("symlinks puzzle" etc).
The patch on find_fileconflict looks complex, but it is mainly an
"indent-patch", the new code-part can be found after the
/* check remove list ... */ comment, and I modified something around the
"file has changed hand" case (see comment modifications in the code).
Unfortunately sync.c became more ugly, because we have to create 2 parallel
internal transactions: to avoid duplicated work, upgrade transaction is
used to load package data (filelists). This problem will disappear, when
we finally get rid of internal transactions.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Resolvedeps reports error when it cannot resolve some dependencies, puts
them into the *data list, and set pm_errno. If user removes the
unresolvable packages from the target list, we have no error anymore,
so from now on we free *data list (we eliminate a memleak) and unset
pm_errno.
(Additionally I removed two needless lines from the code, unresolvable list
is always freed in cleanup.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
without QUESTION
After commit f57f8d33862050acc8d131710c100ba47877e675 pacman *silently*
ignores packages from IgnorePkg/IgnoreGroup during dependency resolving,
if prompt == 0. This behavior is changed to "give warning + ignore".
(Otherwise the user is not informed about the fact that the package
resolving was blocked by ignorepkg.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch fixes FS#12059.
Now sync_addtarget can return with PM_ERR_PKG_IGNORED, which indicates that
although the requested package was found it is in ignorepkg, so alpm could
not add it to the transaction. So the front-end can decide what to do.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Commit 142225fd typo-ed this one, as it should look like the rest of the
checks similar to it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The index in the for loop wasn't being incremented, so
if the first file wasn't found, the second file would be compared to the
first checksum, rather than the second.
Signed-off-by: Loui Chang <louipc.ist@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds alpm_db_update() to the alpm_databases Doxygen group. The function
is described in more detail and a code example is given.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Simplify the gitweb links.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Move some of our documentation files, even though they aren't manpages, to
the doc/ directory. This allows the new 'html' make target to manage them.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now the comment was showing up in the generated manpage and HTML
documentation. Just kill it as asciidoc keeps screwing us over.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Also ignore .html files in doc/.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Samed Beyribey <ras0ir@eventualis.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
After some irc/forum experiences, I decided to document this option.
However, I left the debug-level undocumented (--debug=2).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
After the splitpkg implementation, the tidy_install function
was not being called in PKGBUILDs with only the build() function.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Fixes FS#13417. Do no exit makepkg on a failure to install the
built package(s). This allows clean-up to still occur.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The log files now have -build or -package at the end and there
are separate log files for each *_package() function. Alter
clean_up() to deal with this. Also, move glob outside quotes so
this actually works.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Install all created packages when using the install option with
package splitting.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The pkgbase variable is added to improve informational output and
source package naming when using split packages. Defaults to
${pkgname[0]} if not set.
Also:
- move splitpkg detection to after pkgname presence is verified
- add "cd" line to package_foo() functions in splitpkg proto
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
What does gstmpdir mean?
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
The modification time on depends and desc file were changed to match the
modification time of the package file. I don't see why and we are actualling
losing information here. If we want to know the date of the package file, we
can just look inside the depends file. If we want to know when the entry was
created, we should not alter the modification time of depends and desc.
Besides, this had the non-obvious and undocumented side effect that the
depends file was always created, even if it was empty. And pacman actually
does require that. So I added a "touch depends" to always create the file.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Weird things could happen if several repo-add were run concurrently on the
same database. The introduced locking system will prevent this to happen.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
- arch was missing
- backup is not used by repo-add. However makepkg still needs to put it in
PKGINFO because pacman uses it
- startdir is no longer used after the new delta implementation
- the declaration of group, depend, backup, etc is not needed because these
variables are always declared before being used :
declare $var="$val"
case "$var" in
group) _groups="$_groups$group\n" ;;
- reorder the variables declaration to follow the same order than they are
written to the depends and desc file, for making future checks easier
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Use the correct database format
Use xdelta3 to get the source and destination files from the delta itself
Allow delta files to be added with repo-add just like package files. delta
files can also be removed with repo-remove. This is simply done by looking
for a .delta extension in the arguments, and calling the appropriate
db_write_delta or db_remove_delta functions.
Example usage:
repo-add repo/test.db.tar.gz repo/libx11-1.1.99.2-2-x86_64.pkg.tar.gz
repo-add repo/test.db.tar.gz repo/libx11-1.1.5-2_to_1.1.99.2-2-x86_64.delta
repo-remove repo/test.db.tar.gz libx11-1.1.5-2_to_1.1.99.2-2-x86_64.delta
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
