summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-21Do not refer to FlySpray numbersAllan McRae
These references to bug numbers assume we will forever be using that bug tracker. It is better to properly comment the code instead (which was done in almost all cases anyway). Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21ini.c: give recursion limit file scopeAndrew Gregory
The recursion limit is an artificial limitation imposed to prevent memory exhaustion in a recursive function. Giving it file-level scope increases its visibility. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21ini.c: make errors in includes fatalAndrew Gregory
If an error in the main file would be fatal there is little reason to ignore the error in an included file. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21ini.c: reuse line bufferAndrew Gregory
By the time we make the recursive call we have already finished with the line buffer, making it safe to reuse. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: extract ini parsing code to separate filesAndrew Gregory
Move _parseconfig to ini.c as _parse_ini and create a convenient wrapper for the public API. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: pass _parse_directive as a callbackAndrew Gregory
This will allow passing arbitrary key/value handlers. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: move section handling out of _parseconfigAndrew Gregory
_parseconfig now tracks the current section name directly so that the name stored in the section struct is just a pointer to the one stored by _parseconfig. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: move directive parsing out of _parseconfigAndrew Gregory
Include directives no longer have to be within a section. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: move repo parsing out of _parseconfigAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: add parse_options to section_tAndrew Gregory
This consolidates all of our state information into a single variable. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21pactest: remove results summaryAndrew Gregory
This functionality can be provided by a test harness. Having pactest output this information as well clutters the result log created by automake. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21integrate tests with automakeAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21pactest: accept test names without a switchAndrew Gregory
This removes the --test switch, making it easier to call pactest from a test harness. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21provide default values for test scriptsAndrew Gregory
Our test scripts currently require that the first argument be the library or binary to be tested. This makes integrating them with automake which doesn't have a mechanism for passing specific arguments to individual tests. Instead, provide a default built from paths in the environment which can be provided to all test scripts by automake. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21convert pactest to TAP outputAndrew Gregory
Each test produces a single TAP result with the rules run in a sub-test. This reduces output when run under automake and makes it possible to continue setting expectfailure at the test level rather than per-rule. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21pactest: treat unknown rules as failuresAndrew Gregory
Tests should only be skipped when they aren't relevant, not when the test itself is bad. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21convert test scripts to tap outputAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21query006: only set expectfailure on 32-bit systemsAndrew Gregory
Use the architecture of the python interpreter running the test to detect 32bit systems. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Report missing directory if we can not initialise alpm libraryAllan McRae
When pacman failed to initialise the alpm library due to the database directory being missing (either via the root not existing or the database directory itself not existing), it just printed the non-informative message "could not find or read directory". Add the directory information the the error output. E.g.: error: failed to initialize alpm library (could not find or read directory: /this/does/not/exist/var/lib/pacman/) Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Remove setlocale usage from the backendAllan McRae
Using setlocale in the backend is bound to lead to frontend issues and we have have been using epoch in our databases since April 2007 (commit 47622eef). Remove support for old style times. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Warn when directory ownership differs between filesystem and packageAllan McRae
We currently only warn if a directory's permissions differ, but using -Qkk on my system shows that directory permissions tend to change in packages reasonably frequently without notice. Provide a warning in such cases so that it can be altered. Example output: (1/1) reinstalling nginx warning: directory ownership differs on /var/lib/nginx/proxy/ filesystem: 33:0 package: 0:0 Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Only note backup file changes with -QkkAllan McRae
Backup files are expected to be changed and should not be flagged by -Qkk. Note changed back-up files in -Qkk but do not count them as altered. Do not report backup files in -Qqkk. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Fix whitespace in makepkg.sh.in and makepkg-template.pl.inJason St. John
Replace spaces with tabs in one instance. Remove extra spaces. Signed-off-by: Jason St. John <jstjohn@purdue.edu> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Fix whitespace in pacsort.c and pactree.cJason St. John
Replace spaces with tabs. Remove extra spaces. Signed-off-by: Jason St. John <jstjohn@purdue.edu> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: provide an --output option to show any .pac* filesJonathan Frazier
This is an option to just echo's the pacnews/pacsaves instead of merging or removing them. This can be used to check the config status such as in a cron job without modifying the system. Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: make pacmandb search the default type.Jonathan Frazier
Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: improve speed, accuracy finding active configs using pacmandbJonathan Frazier
This is a new search type, using -p or --pacmandb options. It reads config file locations directly from the local pacman db. It will find active configs anywhere they are defined in installed packages. It is not dependant on outside configs such as updatedb.conf or scanning a large set of directories for find. This will find more pacnews than find when searching with the current default of /etc, and it is faster than both find and updatedb when searching the entire fs. When run directly after an update, the local db is more likely to be cached than all files in /etc or / as other methods read. This will increase performance further post upgrade. After a package is removed and a pacsave is created, this method will not find these pacsaves until the base config is added to the local db again. These files have no influence in a working system and only take up a few blocks of disk space. Active configs need to be dealt with immediately to keep a system working. pacsaves related to removed configs can remain for weeks or months without problems. I would recommend occasionally running other methods such as --locate to remove them. Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: rework search type handling, add --find optionJonathan Frazier
Change cmd tests to if (( USE_FIND ))... as it is cleaner. All search cmds have an option and a variable initialized to zero. The active option should be set to 1. Add a switch to exclude multiple search options. set the default when all are equal to zero. Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: add --nocolor option for the terminally challenged.Jonathan Frazier
Allow colors to be disabled for use on broken/serial terminals. Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: allow multiple separated optionsJonathan Frazier
loop over arguments, this will allow adding options such as --nocolor Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: clean up and reword --helpJonathan Frazier
Clean up and reword --help get rid of all the echos to make it easier to read in source. Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: Search and give warnings for older pacsave.[0-9]* filesJonathan Frazier
Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Corrected return codes for Sg flagAshley Whetter
Non-zero is now returned if a group is searched for that doesn't exist. Fixes FS#36097. Signed-off-by: Ashley Whetter <awhetter.2011@my.bristol.ac.uk> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Fix typoAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22clarified descriptions for pactree -r (--help)Zulker Nayeen Nahiyan
Signed-off-by: Zulker Nayeen Nahiyan <nahiyan02@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Clarify inter-conflicts messageAllan McRae
Use a clear message rather than using a made up word to describe what we are doing. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Install makedepends and checkdepends togetherAshley Whetter
Fixes FS#31557 Signed-off-by: Ashley Whetter <awhetter.2011@my.bristol.ac.uk> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22pacdiff: Add quit to found pacnew optionsJonathan Frazier
Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Carry a copy of gpgme.m4Allan McRae
On systems without gpgme installed, autoreconf will fail with an unrelated error message unless the gpgme.m4 file is present. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Remove autoclean.shAllan McRae
Use 'git clean' instead. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Patch ltmain on autoreconfAllan McRae
We used to carry a patched version of ltmain in our repos to fix libtools issues with -Wl,-as-needed. Now that ltmain is "generated" by autoreconf, we manually patch it afterwards. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Use autoreconf in autogen.shAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Update gitignore files for use with autoreconfAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Remove autotools filesAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22be_sync: avoid crashing on files in the root of a DBDave Reisner
If a sync DB is malformed and contains entries in the root of the archive, load_pkg_for_entry will leave the 'filename' variable empty, leading to a crash in the ensuing strcmp() calls which determine the DB fragment being examined. While this isn't a read error, this should be reported to the user so that it can be addressed by the creator of the DB. As seen: https://bbs.archlinux.org/viewtopic.php?pid=1297766 Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2013-07-22Hide unused parameter warnings when building without libcurlAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Add missing headerAllan McRae
Exposed when building with --without-libcurl Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-05use full path when checking for mountpointsAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-05do not check error from close(2)Dave Reisner
On operating systems we support, the behavior is always such that the kernel will do the right thing as far as invalidating the file descriptor, regardless of the eventual return value. Therefore, potentially looping and calling close multiple times is wrong. At best, we call close again on an invalid FD and throw a spurious EBADF error. At worst, we might close an FD which doesn't belong to us when a multi-threaded application opens its own file descriptor between iterations of the loop. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-05Consolidate and improve table implementationsSimon Gomizelj
Implement both the VerbosePkgList and the summary message with the same table. Improve VerbosePkgList by caching attributes and cell's lengths instead of recaculating them. Right align every cell that containing a file size in both the VerbosePkgList and the summary. Simplify the printf statements and the alignment application. Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-15 10:27:08 +0000