| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were using the stat() system call in quite a few places when we didn't
actually need anything the stat struct returned- we were simply checking for
file existence. access() will be more efficient in those cases.
Before (strace pacman -Ss pacman):
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
33.16 0.005987 0 19016 stat64
After:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
34.85 0.003863 0 12633 1 access
7.95 0.000881 0 6391 7 stat64
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
After the "shopt -s nullglob" change, all regular expressions should be
properly quoted.
This commit only fixes the ones I found, there are probably others left, so
this should be kept in mind for easier future fixing.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now makepkg can handle filenames with whitespaces in the source array.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
md5sum, sha1sum, etc, do not exist on BSD systems by default. Openssl is a
good portable alternative. This also brings in a dependency for openssl.
Closes FS#10530.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add documentation for $startdir, $srcdir, and $pkgdir variables, as well as
general information about the build() function and about custom variables
in PKGBUILDs. This addresses FS#10634.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes FS#10644.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
They shared about 75% of their code, so there is no real reason we should
maintain them separately. Merge the differences accordingly and add a check
based on the basename of the command used to decide what behavior to follow.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Linux coreutils provides readlink, and BSD systems tend to have realpath
available. Both commands provide similar functionality but of course have
different names. Add a check for either and use what is available.
While doing this, also unify some of the differences that have cropped up
between repo-add and repo-remove.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch moves the generating of integrity checks to before any
error checking takes place in the PKGBUILD file. This allows integrity
generation to complete when unrelated errors exist in a PKGBUILD file
and allows the removal of multiple checks of the GENINTEG variable that
would otherwise be needed.
In addition a minor fix is made to a comment.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
No libalpm translation yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes to old translations and new strings for upcoming 3.2 release.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
On BSD systems, as super user, the 'ls' command displays all dot files by
default, causing these to get included when not intended. If we use the bash
glob operator, we can avoid issues with ls on different platforms; however,
we need to turn the nullglob shell option on first to ensure we don't have
problems in empty directories.
Originally-noticed-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This supplements the --source option and does nearly the same thing, except
downloaded source files are included in the archive as well. The sources are
now packages with a pkgname/ prefix.
Original-work-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Original work by Carlo "carlocci" Bersani with additions by
Xavier Chantry and Allan McRae
This script rebuilds an already installed package using metadata
stored into the pacman database and system files. Replaces the
outdated re-pacman script
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We used list_display() on -Sg output, which might have been slightly nicer
looking but made it much harder to parse in something like a shell script.
Reformat it in the 'grpname pkgname' format that -Qg is already using.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Some previous commits apparently broke the get_filename function for package
loaded with pkg_load (on a -Qip operation) because this field was no longer
filled. Now pkg_load fills it.
But the -Qip operation needs to be run like this : -Qip <filename>, so the
filename is already known. There is no need to display it again.
Besides, on a normal -Qi operation, the filename is not displayed either
because this information is not stored in the local database.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
By putting the search / group / info / list operations just after the -Sy
op, we can simplify several checks :
1) the check for "missing targets". Since we took care of the above
operations, we now have less cases to consider :
* -Syu or -Su : we can proceed
* -Sy : we can end now (this is actually a bugfix)
* -S : this op requires targets, so exit with an error
2) the check to see if a transaction is needed. If we arrive at the end of
the function, it is either because we have -Su or -S <targets> so we already
know a transaction is needed there.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Errors like the following one happen regularly (for unknown reasons...) :
error: could not open file /var/lib/pacman/local//glibc-2.7-9/depends: No
such file or directory
Anyway, every time an user reported an error like that, it always seemed
like he thought the error was caused by the double /, which is obviously
wrong.
Since db->path always include a trailing /, there is no need to add one when
concatenating paths in be_files.c or add.c.
Additionally, some static strings were switched to dynamic.
And the computation of the "dbpath"/"pkgname"-"pkgversion" was refactored
in db_read, db_write and db_remove with a get_pkgpath static function.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add a new totaldlcb callback function to libalpm and make pacman utilize it
when the TotalDownload option is enabled. This callback function is pretty
simple- it is meant to be called once at the beginning of a "list download"
action, and once at the end (with value 0 to indicate the list has been
finished). The frontend is responsible for keeping track of adding
individual file download amounts to the total xfered amount in order to
display some sort of overall progress.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We have been using unsigned long as a file size type for a while, which
works but isn't quite correct and could easily break. Worse was probably our
use of int in the download callback functions, which could be restrictive
for packages > 2GB in size.
Switch all file size variables to use off_t, which is the preferred type for
file sizes. Note that at least on Linux, all applications compiled against
libalpm must now be sure to use large file support, where _FILE_OFFSET_BITS
is defined to be 64 or there will be some weird issues that crop up.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was mistakenly referencing the LGPL even after the XySSL code bump, so
fix the license clause to be correct.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
makepkg should not abort with error when a user uses the --nobuild option to
extract sources if a package has already been built.
Signed-off-by: Anton Fiuman <llexiw@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add a new configure flag, --enable-git-version, that allows the output of
'git describe' to be used in the version string associated with this
package. This could aid in debugging for users that are using a development
version of pacman and we should be able to figure out which cut of code they
are using.
Sample output:
$ pacman --version
Pacman v3.1.4-190-g4cfa-dirty - libalpm v2.3.1
$ makepkg --version
makepkg (pacman) 3.1.4-190-g5861-dirty
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 84283672853350a84d2a71b72dc06e180cad1587 introduced the regression,
and a previous commit introduced the vercmptest.sh test script to track down
these issues. This commit solves the problem by removing the previous
attempt at locating the pkgrel portions and replacing it with something that
performs the correct logic.
While tracking down everything I needed to, I also found a mistake in one of
the pactests which is fixed here as well as increased the functionality and
verbosity of the vercmptest script to both print out each test it is running
as well as automatically run the mirror of each test case.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 84283672853350a84d2a71b72dc06e180cad1587 updated the versioncmp code
in libalpm. Unfortunately for us, it also introduced the regression that
becomes apparant with the following upgrade:
warning: sonata: local (1.5-2) is newer than extra (1.5.1-2)
Add a vercmptest.sh test script that is run during the make check phase
which now points out three regressions in the version comparison function
that will need fixing. All current tests in this script pass with the old
versioncmp code.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we don't set the pkgname var to NULL, we run into all sorts of beautiful
segfault behavior when a group spans multiple repositories and we try to
print out the location of the former list. Easy fix.
This regression was introduced in bf8670036907b3ede18d37b7a3f0f7e14542a5ac.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Removed unused handle->uid from pmhandle_t. The need to check permissions
should be determined by the frontend (and is in pacman).
Fixed comment on noextract in pmhandle_t.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This event was unused, was missing the equivalent EXTRACT_DONE event, and
was useless because we already have ADD / UPGRADE START and DONE events.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
repo-add and db_read both assume that REPLACES and FORCE fields are in the
desc file, so do that for db_write as well (instead of depends file).
Note that db_write is currently only used on the local database. And the
only purpose of replaces and force in local database is for information
purpose (available on -Qi operations). So this is not a big problem.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-May/011859.html
Acked-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds the sync equivalents of upgrade010.py and upgrade070.py.
Both additional test pass.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Acked-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch removes the code block in makepkg that checked for depreciated
options in a PKGBUILD and provided a workaround. Unknown and depreciated
options are upgraded to error conditions.
Also, removed TODO regarding including install script if exists and $install
is unset. That should never happen.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Name and version are computed from "/var/lib/pacman/..." pathname. And the
%NAME% and %VERSION% fields from the desc file were not even read. So now,
when we read the desc file, we make sure the %NAME% and %VERSION% fields are
consistent.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In the case of -Rs operation, first pulling the dependencies with
recursedeps before calling checkdeps takes care of the dependency chain of
remove052 pactest.
In the case of -Rcs, we can keep the old behavior because we have no problem
there (any dependency returned by checkdeps will be added to the remove list
because of -Rc) and we have to run recursedeps on the final remove list
anyway to catch all orphans.
Ref.: http://www.archlinux.org/pipermail/pacman-dev/2008-April/011569.html
Signed-off-by: Nagy Gabor <ngaba at bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds a test for when removing multilpe packages recursively from a
chain of dependent packages. This situation can occur when removing
installed dependencies with makepkg if a "makedepend" recursively depends on
a "depend" or if redundant dependancies are included.
Signed-off-by: Allan McRae <mcrae_allan at hotmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Catches error from when pacman is unable to remove dependencies after
successfully building package and prints warning. Fixes FS#10039.
Signed-off-by: Allan McRae <mcrae_allan at hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
On BSD systems using a dot as a separator is not allowed. On Mac OSX it
is deprecated. A colon should be used instead. BSD systems also use the
"wheel" group instead of "root" to indicate the "super user" group. Both
groups use the id of 0.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Acked-by: Aaron Griffin <aaronmgriffin@gmail.com>
Acked-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
