summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-09libalpm/trans.c : exit the forked process correctly in case of errors.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-07-09Add AC_SYS_LARGEFILE to configure.acDan McGee
This defines _FILE_OFFSET_BITS == 64, which makes stat calls transparently use stat64, etc. This allows us to support large files, such as packages over 1 GB in size. libarchive was already correctly compiled with this macro. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-09Change the exit code for pacman_deptest().Andrew Fyfe
Changed the exit code for missing deps from 1 to 127 because 1 is used for other errors. makepkg breaks if pacman exits with 1 for any reason other than a missing dep. Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-07-09Clean up the alpm handleDan McGee
Add some comments in handle.h, and remove the pmaccess_t part that we don't even use. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-09Remove gettext from any alpm_logaction callsDan McGee
We shouldn't translate log messages to pacman.log so it is consistant and can be parsed by other tools. Remove all gettext _() around these strings. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-08Add top level hidden file code to package.cDan McGee
This was already taken care of in add.c by commit 2ae043866045bbeef129a4b503ee1f5486545821, but was missed in package.c. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-06Make paragraph text in scripts single stringsDan McGee
It is much easier for translators to deal with paragraphs as strings rather than by lines. Take all usage and version information and convert it to this format. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-06Move scripts from *.in to *.sh.in so gettext can determine typeDan McGee
If we move the scripts from *.in to *.sh.in and *.py.in, gettext can pull the required strings to translate a whole lot easier. Do this. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-06First step of moving translations from src/pacman/po to po/Dan McGee
Move the translations from src/pacman/po to just po/ so we can include the scripts gettext translations in the same message catalog as that of the pacman frontend. The libalpm message catalog, for now, will remain a separate existence. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-06Various small fixes as suggested by some static code checkersDan McGee
I ran flawfinder and sparse over the pacman source code and found a few things that were worth fixing (and were quick fixes). Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-06Fix up pactest TODODan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-02Reduce delay in pactest when running MODIFIED testsDan McGee
pactest was sleeping for 3 seconds, which is unnecessary. Reduce it to 1.5 seconds and clean up the code a bit anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-02pacman/query.c : return after a query on all packages.Chantry Xavier
Previously, the following error was displayed even after a valid and successful query operation on all packages, like -Q , -Ql, -Qi, -Qil : no targets specified (use -h for help) Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-07-01Update 'submitting-patches'Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-01pacman/packages.c : print an error for files that can't be stated.Chantry Xavier
The -Ql operation is supposed to print all files but directories. stat was used for detecting directories. However, when stat failed, (because the file doesn't exist or is not readable), the files were still displayed just like the others. Now, these files are printed on stderr, with the corresponding error message. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-07-01libalpm/add.c : fix for FS #7484Chantry Xavier
Adds the ARCHIVE_EXTRACT_NO_OVERWRITE libarchive flags for extracting files and directories. This will prevent symlinks for being overwritten by directories. All other files that need to be extracted should already have been deleted previously by pacman. This flag is not used for extracting files in backup array to /tmp/alpm_XXXX, because this file is created by mkstemp first, and so needs to be overwritten by the file from the archive. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-07-01libalpm/add.c,util.c : log ARCHIVE_WARN warning to debug output.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-07-01Remove unnecessary and extra includesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-01Add mode and type checking to pactest for filesDan McGee
Add the ability to check the permissions and type of a file within the framework of pactest. Two new rules can be used: self.addrule("FILE_TYPE=bin/foo|file") self.addrule("FILE_MODE=bin/bar|644") TODO: add the ability to add different types of files (eg links) via the test package building framework, and add the ability to change the modes on files. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-01Move Doxygen manpage generation to doc/ directoryDan McGee
Instead of doing the doxygen work in the libalpm/ dir, do it with the rest of the docs in the doc/ dir. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-28libalpm/add.c : ignore libarchive warning.Chantry Xavier
With libarchive 2.2.3 (previously 1.3.1), archive_read_extract now returns ARCHIVE_WARN when a package is extracted as user, because for example, UID=0 or SUID bit can't be set. This patch makes pacman not treating these warnings as errors anymore, but simply ignoring them. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-06-28libalpm/util.c : stat returns 0 on successChantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-06-28scripts/makepkg.in: Don't include .PKGINFO etc in .FILELISTAndrew Fyfe
And move .PKGINFO and .FILELIST to be the first to files included in the package. Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-06-27Remove lockfile configuration from frontend, make it job of libalpmDan McGee
I previously introduced some patches to make just about every path in pacman/libalpm configurable; doing this with the lockfile seemed a bit too far and we really should just place the lockfile where it belongs- with the DB that needs locking. More details in this thread: http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-27pacman.c: make parseconfig a bit more robustDan McGee
Don't let parseconfig overwrite settings that parseargs already made. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-27Remove scriptlet START and DONE commands that we don't useDan McGee
The scriptlet calling had some unneeded complexity for the time being which we aren't using here. Let's get rid of it until we find a good way to implement it correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-27scripts/makepkg.in: Use bsdtar to find packages for xdelta.Andrew Fyfe
When looking for old packages to create a delta from used bsdtar to read the packages .PKGINFO to check it's name and arch instead of depending on the filename of th package. Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-06-27scripts/makepkg.in: Fix creation of .FILELISTChantry Xavier
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-06-27FS7485: Replace tar/cpio/unzip with bsdtar for extracting/creating packages.Baptiste Daroussin
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-06-27Fix wrong permissions on pacnew extractionDan McGee
First reported here: http://bbs.archlinux.org/viewtopic.php?pid=261861 Newly created files were done with the standard umask, so those that are extracted seperately and copied to a .pacnew extension will have the wrong permissions. This should hopefully fix this. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-27Remove TODO items that have been taken care of.Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-28libalpm/remove.c : file variable used before being initialized.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-06-27Add archlinux.de mirrorDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-26Add pactest to help debug FS #7415Chantry Xavier
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-26Add sync301 pactest- pacman gains new deps and should be pulled inChantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-26Make alpm_splitdep immutableNagy Gabor
The alpm_splitdep function formerly overwrote the input string, causing a few issues. Fix this. Signed-off-by: Nagy Gabor <ngaba@petra.hos.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-26Remove unnecessary trans parameter from _alpm_checkdepsNagy Gabor
The trans parameter was never used, so remove it. Signed-off-by: Nagy Gabor <ngaba@petra.hos.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-26Don't extract any top-level files in a package that start with '.'Dan McGee
For future possibilities, don't extract any files that start with '.'. This will allow us to add features such as the ChangeLog viewing without having to wait to include these files in packages, because older versions of pacman will be forward compatable with 'hidden' files at the root level of the package. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-26Mirror update and NEWS updatesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-20libalpm/util.c: remove unnecessary includeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-20Revert "Fix libarchive permission extraction"Dan McGee
This was a bad way to fix a problem upstream. Doing this resulted in symlink permissions being applied to files installed on the system, leaving some binaries with 77 permission, etc. This reverts commit 4e6b7c1cde4c0ac1d035b51f9af19510a7c9135e.
2007-06-17Update Doxyfile and add a few missing parts of documentationDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-17Remove some use of goto in the pacman frontendDan McGee
Refactor the goto cleanup; statements out of add.c and remove.c, and move what the cleanup: label did into a function. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-17Quick updates to the bash completion scriptDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-17FS7338: Fix conflicts typo totally this time.Chantry Xavier
The last typo fix for conflicts wasn't complete, it only fixed one occurence of the conflicts variable, instead of the two : http://www.archlinux.org/pipermail/pacman-dev/2007-May/008222.html This caused all conflicts statement to be ignored, so all databases will need to be rebuilt with a fixed repo-add. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-06-13scripts/makepkg.in: Forgot the fakeroot switch when changing to GNU getopt.Andrew Fyfe
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-06-13Add ARM architecture to configure.acDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-13Clean up pacman/sync.c and organize it a bitDan McGee
Re-add some checks for a valid target list. In addition, move variable declarations to the most local scope possible, which should help in finding errors that were previously uncaught. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-13Remove some more diskspace checking holdover stuffDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-12Functionalize query.c and pacman_queryDan McGee
Move a lot of the operations that pacman query performs into their own functions for ease of following the flow and for possible later merges with their sync counterparts. We need to think less in terms of operations and more in term of overall concepts. Also (re)introduced checks for the target list on a -Q operation, ensuring that we only call certain query operations when it is sane to do so. Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-15 19:43:12 +0000