| Age | Commit message (Collapse) | Author |
|---|
|
os.walk(".") adds a prefix of "./" to filenames in python-2.7 which
causes libalpm not to like archives generated in the testsuite resulting
in widespread failure.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Currently bacman always compresses with gzip now matter what PKGEXT is
set to. Rework the entire package creation process to be similar to
that in makepkg. This also make the explicit assumption that PKGEXT is
defined in makepkg.conf.
Thanks to Nelson Chan <khcha.n.el@gmail.com> for the original patch to
fix the incorrect package compression.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
It touched up these a bit after it ran, so might as well check the changes
in so we don't have to deal with them again later.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Forgot to mention things involving the translation changes we had.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off by: Tobias Eriksson <tobier@tobier.se>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is being checked in as 'pt' rather than 'pt_PT' as that is what
Transifex seems to want, and it is also the dominant choice of packages
already installed on my system when doing a count of the files located in
the /usr/share/locale translation directories.
Thanks for the new translation!
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Adds a shell to the fake root set up for pactests, which was not needed
previously due to a bug (debian #582847) in fakechroot.
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org>
|
|
Submitted through Transifex on 2010-07-02.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As noted in FS#20498, if an absolute path is used for specifying the
database when invoking repo-add, the symlink generated will point to the
absolute path instead of being relative to the directory. Fix this for
the two linking cases, but leave the copy untouched so that will still
work.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Prevent makepkg aborting whe colors are enabled and the terminal
does not support setting colors by tput.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Avoids letting the shell evaluate ! as something else (e.g. an alias).
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I'm not sure why it doesn't happen everywhere, but we need <sys/stat.h> for
umask and mkdir in this file. I hit this today:
cc1: warnings being treated as errors
util.c: In function ‘makepath’:
util.c:128:2: error: implicit declaration of function ‘umask’
util.c:141:5: error: implicit declaration of function ‘mkdir’
make[2]: *** [util.o] Error 1
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We no longer use these anywhere outside of sync.c, so do the rename and add
static to their definition to meet our coding standards.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As reported in FS#20221, we don't always do the right thing when installing
a group and using the --needed option. This was due to the code pulling
packages based on what was already in the transaction's add list, but
completely ignoring the fact that we may have already seen and skipped this
same package in an earlier repository.
Add a list to the private _alpm_sync_pkg() function that allows us to have
this extra information so we don't mistakenly downgrade a package when using
--needed.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The first step for resolving FS#20221. sync023 is the case from the bug
report; sync022 is already working fine but we have no tests at all that
test the --needed option in any form.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes repackaging issues when multiple package names are passed to the
--pkg option.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will allow me to be not quite as lazy in getting website changes out
to the Arch Linux server by making it trivial to get everything packaged up
and working correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes two issues:
1) using "sudo -l" results in excess password asking under certian
configurations. Revert to the pre 3.4 behaviour of always using
sudo if it is installed.
2) Properly escape the command so that that versioned dependencies,
such as "foo>4", do not get treated as output redirection when using
su. This also unifies the generation of the pacman line and its
privilege escalation.
Based on patches supplied by Andres P <aepd87@gmail.com> with minor
adjustments for suitability for the maint branch.
Original-work-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Because the shell gettext doesn't allow for positional gettext substitution,
be more careful about where we use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Attempt to find "du" from coreutils in the standard paths and if
not revert to the version in the users PATH. Using the full path
prevents issues such as FS#19932, where a different and incompatible
version of du is put earlier in the users path.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The 'grep -R' in the $srcdir check would not only grep regular files,
but also devices, symlinks (that might potentially point outside of
$pkgdir), pipes and so on. Use find to ensure only regular files are
examined.
This should fix https://bugs.archlinux.org/task/19975
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We were seeing some issues when trying to create our new database alias
using symlinks on certain filesystems (see FS#19907). Have a fallback method
in place where we first try a symlink, then a hard link, then just copy the
database if all else fails.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
To avoid errors with bash 3.2, compopt will be skipped if it's not a
shell builtin.
compopt is needed to not append slashes to package names that
coincide with directories in PWD.
This is currently not possible to fix in bash versions that do not support
compopt, so these users will have to bear that regression.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Running "pacman -T foo" is expected to return a non-zero value when
"foo" is not installed. This sets of the error trap in bash-3.2 but
not bash 4.x. Work around this by disabling the error trap around
this pacman call as we are manually checking the return value anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If this is to be scripted with AIF or another tool, it needs to respect stderr.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Valid pacman configuration files do not have to start with a hash for that line
to be a comment, neither do directives need to be in column 0.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
$replacedurl was being built from an expansion of itself. But at the time it
happened, it was empty.
Fixes FS#19911
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Commit 3d67d9b1 introduced multiple bash4 string manipulations.
Revert those in order retain compatibility with bash-3.2 which
is still widely used.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Rather than say we can't find the target after saying "No, I guess I don't
want to install this", we should make sure the ignored status gets passed
all the way through. This fixes FS#19866.
Pactest is also included that failed before due to the fact that we normally
treat an unfound package as a reason to exit with a non-zero status.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is a partial revert of commit d44e5099. By making disabling docs the
default, it presents all sorts of problems- namely anyone who builds from a
tarball and isn't careful enough to include '--enable-doc' will get an
install without any manpages at all. Remember that make includes both
'build' and 'install' steps.
The warning introduced by the commit is kept, so we do not lose all its
benefits, but I am not happy to see regressions introduced in packaging and
installing of this piece of software.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If the library stripping variables are not defined in makepkg.conf,
libraries will be fully stripped and become broken. Fallback to a
sane default stripping level.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 5fe41df8 broke `make distcheck` pretty badly for the doc directory.
Looking at what this commit was trying to accomplish, it make sense to
revert a lot of the build system changes and just simplify what we are
showing in the man page anyway- an example, not exactly how it is configured
on your system.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
