Convert the remaining man pages to asciidoc.

Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>

1 files changed, 256 insertions, 0 deletions

diff --git a/doc/PKGBUILD.5.txt b/doc/PKGBUILD.5.txt
new file mode 100644
index 00000000..642f8884
--- /dev/null
+++ b/doc/PKGBUILD.5.txt
@@ -0,0 +1,256 @@
+PKGBUILD(5)
+===========
+
+Name
+----
+PKGBUILD - Arch Linux package build description file
+
+
+Description
+-----------
+This manual page is meant to describe general rules about PKGBUILDs. Once a
+PKGBUILD is written, the actual package is built using makepkg and installed
+with pacman.
+
+*NOTE:* If you have a local copy of the Arch Build System (ABS) tree on your
+computer, you can copy the PKGBUILD.proto file to your new package build
+directory and edit it from there. To acquire/sync the ABS tree, use the abs
+script included with pacman.
+
+
+Options and Directives
+----------------------
+*pkgname*::
+	The name of the package. This has be a unix-friendly name as it will be
+	used in the package filename.
+
+*pkgver*::
+	The version of the software as released from the author (e.g. 2.7.1).
+
+*pkgrel*::
+	This is the release number specific to the Arch Linuxs release. This
+	allows package maintainers to make updates to the package's configure
+	flags, for example.
+
+
+*pkgdesc*::
+	This should be a brief description of the package and its functionality.
+	Try to keep the description to one line of text.
+
+*url*::
+	This field contains a URL that is associated with the software being
+	packaged. This is typically the project's website.
+
+*license (array)*::
+	This field specifies the license(s) that apply to the package.
+	Commonly-used licenses are found in /usr/share/licenses/common. If you
+	see the package's license there, simply reference it in the license
+	field (e.g. license=("GPL")). If the package provides a license not
+	found in /usr/share/licenses/common, then you should include the license
+	in the package itself and set license=("custom") or
+	license=("custom:LicenseName"). The license should be placed in
+	$startdir/pkg/usr/share/licenses/$pkgname when building the package. If
+	multiple licenses are applicable for a package, list all of them:
+	licenses=('GPL' 'FDL').
+
+*install*::
+	Specifies a special install script that is to be included in the package.
+	This file should reside in the same directory as the PKGBUILD, and will
+	be copied into the package by makepkg. It does not need to be included
+	in the source array (e.g. install=pkgname.install).
+
+*source (array)*::
+	An array of source files required to build the package. Source files
+	must either reside in the same directory as the PKGBUILD file, or be a
+	fully-qualified URL that makepkg will use to download the file. In order
+	to make the PKGBUILD as useful as possible, use the $pkgname and $pkgver
+	variables if possible when specifying the download location.
+
+*noextract (array)*::
+	An array of filenames corresponding to those from the source array. Files
+	listed here will not be extracted with the rest of the source files. This
+	is useful for packages which use compressed data which is downloaded but
+	not necessary to uncompress.
+
+*md5sums (array)*::
+	This array contains an MD5 hash for every source file specified in the
+	source array (in the same order). makepkg will use this to verify source
+	file integrity during subsequent builds. To easily generate md5sums, run
+	"makepkg -g >> PKGBUILD". If desired, move the md5sums line to an
+	appropriate location. *NOTE:* makepkg supports multiple integrity
+	algorithms and their corresponding arrays (i.e. sha1sums for the SHA1
+	algorithm); however, official packages use only md5sums for the time
+	being.
+
+*sha1sums, etc.*::
+	Alternative integrity checks that makepkg supports, as noted in md5sums
+	above.
+
+*groups (array)*::
+	An array of symbolic names that represent groups of packages, allowing
+	you to install multiple packages by requesting a single target. For
+	example, one could install all KDE packages by installing the 'kde' group.
+
+*arch (array)*::
+	Defines on which architectures the given package is available (e.g.
+	arch=('i686' 'x86_64')).
+
+*backup (array)*::
+	A space-delimited array of filenames, without preceding slashes, that
+	should be backed up if the package is removed or upgraded. This is
+	commonly used for packages placing configuration files in /etc. See
+	Handling Config Files in manlink:pacman[8] for more information.
+
+*depends (array)*::
+	An array of packages that this package depends on to run. Packages in
+	this list should be surrounded with single quotes and contain at least
+	the package name. Entries can also include a version requirement of the
+	form 'name<>version', where <> is one of three comparisons: >= (greater
+	than or equal to), <= (less than or equal to), or = (equal to).
+
+*makedepends (array)*::
+	An array of packages that this package depends on to build, but are not
+	needed at runtime. Packages in this list follow the same format as
+	depends.
+
+*conflicts (array)*::
+	An array of packages that will conflict with this package (i.e. they
+	cannot both be installed at the same time). This directive follows the
+	same format as depends, except you cannot specify versions.
+
+*provides (array)*::
+	An array of "virtual provisions" that this package provides. This allows
+	a package to provide dependencies other than its own package name. For
+	example, the dcron package can provide 'cron', which allows packages to
+	depend on 'cron' rather than 'dcron OR fcron'.
+
+*replaces (array)*::
+	An array of packages that this package should replace, and can be used
+	to handle renamed/combined packages. For example, if the 'j2re' package
+	is renamed to 'jre', this directive allows future upgrades to continue
+	as expected even though the package has moved.
+
+*options (array)*::
+	This array allows you to override some of makepkg's default behavior
+	when building packages. To set an option, just include the option name
+	in the options array. To reverse the default behavior, place an "!" at
+	the front of the option. Only specify the options you specifically want
+	to override, the rest will be taken from manlink:makepkg.conf[5].
+	*NOTE:* 'force' is a special option only used in manlink:PKGBUILD[5]s,
+	do not use it unless you know what you are doing.
+
+	*strip*::
+		Strip symbols from binaries and libraries. If you frequently
+		use a debugger on programs or libraries, it may be helpful to
+		disable this option.
+
+	*docs*::
+		Save doc and info directories. If you wish to delete doc and
+		info directories, specify "!docs" in the array.
+
+	*libtool*::
+		Leave libtool (.la) files in packages. Specify "!libtool" to
+		remove them.
+
+	*emptydirs*::
+		Leave empty directories in packages.
+
+	*ccache*::
+		Allow the use of ccache during build. More useful in its negative
+		form "!ccache" with select packages that have problems building
+		with ccache.
+
+	*distcc*::
+		Allow the use of distcc during build. More useful in its negative
+		form "!distcc" with select packages that have problems building
+		with distcc.
+
+	*makeflags*::
+		Allow the use of user-specific makeflags during build as specified
+		in manlink:makepkg.conf[5]. More useful in its negative form
+		"!makeflags" with select packages that have problems building with
+		custom makeflags such as "-j2" (or higher).
+
+	*force*::
+		Force the package to be upgraded by a pacman system upgrade
+		operation, even if the version number would normally not trigger
+		such an upgrade. This is useful when the version numbering scheme
+		of a package changes (or is alphanumeric).
+
+
+Install/Upgrade/Remove Scripting
+--------------------------------
+Pacman has the ability to store and execute a package-specific script when it
+installs, removes, or upgrades a package. This allows a package to configure
+itself after installation and do the opposite right before it is removed.
+
+The exact time the script is run varies with each operation:
+
+*pre_install*::
+	script is run right before files are extracted.
+
+*post_install*::
+	script is run right after files are extracted.
+
+*pre_upgrade*::
+	script is run right before files are extracted.
+
+*post_upgrade*::
+	script is run after files are extracted.
+
+*pre_remove*::
+	script is run right before files are removed.
+
+*post_remove*::
+	script is run right after files are removed.
+
+To use this feature, create a file such as 'pkgname.install' and put it in the
+same directory as the PKGBUILD script. Then use the install directive:
+
+	install=pkgname.install
+
+The install script does not need to be specified in the source array. A template
+install file is available in the ABS tree (/var/abs/install.proto).
+
+
+Example
+-------
+The following is an example PKGBUILD for the 'modutils' package. For more
+examples, look through the ABS tree.
+
+-----
+# Maintainer: John Doe <johndoe@archlinux.org>
+# Contributor: Bill Smith <billsmith@archlinux.org>
+pkgname=modutils
+pkgver=2.4.25
+pkgrel=1
+pkgdesc="Utilities for inserting modules in the linux kernel"
+url="http://www.kernel.org"
+makedepends=('bash' 'mawk')
+depends=('glibc' 'zlib')
+backup=(etc/modules.conf)
+source=(ftp://ftp.kernel.org/pub/linux/utils/kernel/$pkgname/v2.4/$pkgname-$pkgver.tar.bz2
+        modules.conf)
+arch=('i686')
+license=('GPL' 'custom') # dual licensed
+md5sums=('2c0cca3ef6330a187c6ef4fe41ecaa4d'
+         '35175bee593a7cc7d6205584a94d8625')
+options=(!libtool)
+
+build() {
+  cd $startdir/src/$pkgname-$pkgver
+  ./configure --prefix=/usr --enable-insmod-static
+  make || return 1
+  make prefix=$startdir/pkg/usr install
+  mv $startdir/pkg/usr/sbin $startdir/pkg
+  mkdir -p $startdir/pkg/etc
+  cp ../modules.conf $startdir/pkg/etc
+}
+-----
+
+
+See Also
+--------
+manlink:makepkg[8], manlink:pacman[8], manlink:makepkg.conf[5]
+
+include::footer.txt[]