(p1);
if (!HasExactlyOneBit(rts) || !HasRoadTypesAvail(_current_company, rts)) return CMD_ERROR;
break;
default: return CMD_ERROR;
}
uint start_z;
uint end_z;
Slope start_tileh = GetTileSlope(start_tile, &start_z);
DiagDirection direction = GetInclinedSlopeDirection(start_tileh);
if (direction == INVALID_DIAGDIR) return_cmd_error(STR_ERROR_SITE_UNSUITABLE_FOR_TUNNEL);
if (IsWaterTile(start_tile)) return_cmd_error(STR_ERROR_CAN_T_BUILD_ON_WATER);
CommandCost ret = DoCommand(start_tile, 0, 0, flags, CMD_LANDSCAPE_CLEAR);
if (ret.Failed()) return ret;
/* XXX - do NOT change 'ret' in the loop, as it is used as the price
* for the clearing of the entrance of the tunnel. Assigning it to
* cost before the loop will yield different costs depending on start-
* position, because of increased-cost-by-length: 'cost += cost >> 3' */
TileIndexDiff delta = TileOffsByDiagDir(direction);
DiagDirection tunnel_in_way_dir;
if (DiagDirToAxis(direction) == AXIS_Y) {
tunnel_in_way_dir = (TileX(start_tile) < (MapMaxX() / 2)) ? DIAGDIR_SW : DIAGDIR_NE;
} else {
tunnel_in_way_dir = (TileY(start_tile) < (MapMaxX() / 2)) ? DIAGDIR_SE : DIAGDIR_NW;
}
TileIndex end_tile = start_tile;
/* Tile shift coeficient. Will decrease for very long tunnels to avoid exponential growth of price*/
int tiles_coef = 3;
/* Number of tiles from start of tunnel */
int tiles = 0;
/* Number of tiles at which the cost increase coefficient per tile is halved */
int tiles_bump = 25;
CommandCost cost(EXPENSES_CONSTRUCTION);
Slope end_tileh;
for (;;) {
end_tile += delta;
if (!IsValidTile(end_tile)) return_cmd_error(STR_ERROR_TUNNEL_THROUGH_MAP_BORDER);
end_tileh = GetTileSlope(end_tile, &end_z);
if (start_z == end_z) break;
if (!_cheats.crossing_tunnels.value && IsTunnelInWayDir(end_tile, start_z, tunnel_in_way_dir)) {
return_cmd_error(STR_ERROR_ANOTHER_TUNNEL_IN_THE_WAY);
}
tiles++;
if (tiles == tiles_bump) {
tiles_coef++;
tiles_bump *= 2;
}
cost.AddCost(_price[PR_BUILD_TUNNEL]);
cost.AddCost(cost.GetCost() >> tiles_coef); // add a multiplier for longer tunnels
}
/* Add the cost of the entrance */
cost.AddCost(_price[PR_BUILD_TUNNEL]);
cost.AddCost(ret);
/* if the command fails from here on we want the end tile to be highlighted */
_build_tunnel_endtile = end_tile;
if (IsWaterTile(end_tile)) return_cmd_error(STR_ERROR_CAN_T_BUILD_ON_WATER);
/* slope of end tile must be complementary to the slope of the start tile */
if (end_tileh != ComplementSlope(start_tileh)) {
/* Check if there is a structure on the terraformed tile. Do not add the cost, that will be done by the terraforming
* Note: Currently the town rating is also affected by this clearing-test. So effectivly the player is punished twice for clearing
* the tree on end_tile.
*/
ret = DoCommand(end_tile, 0, 0, DC_AUTO, CMD_LANDSCAPE_CLEAR);
if (ret.Failed()) return_cmd_error(STR_ERROR_UNABLE_TO_EXCAVATE_LAND);
ret = DoCommand(end_tile, end_tileh & start_tileh, 0, flags, CMD_TERRAFORM_LAND);
if (ret.Failed()) return_cmd_error(STR_ERROR_UNABLE_TO_EXCAVATE_LAND);
} else {
ret = DoCommand(end_tile, 0, 0, flags, CMD_LANDSCAPE_CLEAR);
if (ret.Failed()) return ret;
}
cost.AddCost(_price[PR_BUILD_TUNNEL]);
cost.AddCost(ret);
/* Pay for the rail/road in the tunnel including entrances */
switch (transport_type) {
case TRANSPORT_ROAD: cost.AddCost((tiles + 2) * _price[PR_BUILD_ROAD] * 2); break;
case TRANSPORT_RAIL: cost.AddCost((tiles + 2) * RailBuildCost(railtype)); break;
default: break;
}
if (flags & DC_EXEC) {
if (transport_type == TRANSPORT_RAIL) {
MakeRailTunnel(start_tile, _current_company, direction, railtype);
MakeRailTunnel(end_tile, _current_company, ReverseDiagDir(direction), railtype);
AddSideToSignalBuffer(start_tile, INVALID_DIAGDIR, _current_company);
YapfNotifyTrackLayoutChange(start_tile, DiagDirToDiagTrack(direction));
} else {
MakeRoadTunnel(start_tile, _current_company, direction, rts);
MakeRoadTunnel(end_tile, _current_company, ReverseDiagDir(direction), rts);
}
}
return cost;
}
/**
* Are we allowed to remove the tunnel or bridge at \a tile?
* @param tile End point of the tunnel or bridge.
* @return A succeeded command if the tunnel or bridge may be removed, a failed command otherwise.
*/
static inline CommandCost CheckAllowRemoveTunnelBridge(TileIndex tile)
{
/* Floods can remove anything as well as the scenario editor */
if (_current_company == OWNER_WATER || _game_mode == GM_EDITOR) return CommandCost();
switch (GetTunnelBridgeTransportType(tile)) {
case TRANSPORT_ROAD: {
RoadTypes rts = GetRoadTypes(tile);
Owner road_owner = _current_company;
Owner tram_owner = _current_company;
if (HasBit(rts, ROADTYPE_ROAD)) road_owner = GetRoadOwner(tile, ROADTYPE_ROAD);
if (HasBit(rts, ROADTYPE_TRAM)) tram_owner = GetRoadOwner(tile, ROADTYPE_TRAM);
/* We can remove unowned road and if the town allows it */
if (road_owner == OWNER_TOWN && !(_settings_game.construction.extra_dynamite || _cheats.magic_bulldozer.value)) {
return CheckTileOwnership(tile);
}
if (road_owner == OWNER_NONE || road_owner == OWNER_TOWN) road_owner = _current_company;
if (tram_owner == OWNER_NONE) tram_owner = _current_company;
CommandCost ret = CheckOwnership(road_owner, tile);
if (ret.Succeeded()) ret = CheckOwnership(tram_owner, tile);
return ret;
}
case TRANSPORT_RAIL:
case TRANSPORT_WATER:
return CheckOwnership(GetTileOwner(tile));
default: NOT_REACHED();
}
}
/**
* Remove a tunnel from the game, update town rating, etc.
* @param tile Tile containing one of the endpoints of the tunnel.
* @param flags Command flags.
* @return Succeeded or failed command.
*/
static CommandCost DoClearTunnel(TileIndex tile, DoCommandFlag flags)
{
CommandCost ret = CheckAllowRemoveTunnelBridge(tile);
if (ret.Failed()) return ret;
TileIndex endtile = GetOtherTunnelEnd(tile);
ret = TunnelBridgeIsFree(tile, endtile);
if (ret.Failed()) return ret;
_build_tunnel_endtile = endtile;
Town *t = NULL;
if (IsTileOwner(tile, OWNER_TOWN) && _game_mode != GM_EDITOR) {
t = ClosestTownFromTile(tile, UINT_MAX); // town penalty rating
/* Check if you are allowed to remove the tunnel owned by a town
* Removal depends on difficulty settings */
CommandCost ret = CheckforTownRating(flags, t, TUNNELBRIDGE_REMOVE);
if (ret.Failed()) return ret;
}
/* checks if the owner is town then decrease town rating by RATING_TUNNEL_BRIDGE_DOWN_STEP until
* you have a "Poor" (0) town rating */
if (IsTileOwner(tile, OWNER_TOWN) && _game_mode != GM_EDITOR) {
ChangeTownRating(t, RATING_TUNNEL_BRIDGE_DOWN_STEP, RATING_TUNNEL_BRIDGE_MINIMUM, flags);
}
if (flags & DC_EXEC) {
if (GetTunnelBridgeTransportType(tile) == TRANSPORT_RAIL) {
/* We first need to request values before calling DoClearSquare */
DiagDirection dir = GetTunnelBridgeDirection(tile);
Track track = DiagDirToDiagTrack(dir);
Owner owner = GetTileOwner(tile);
Train *v = NULL;
if (HasTunnelBridgeReservation(tile)) {
v = GetTrainForReservation(tile, track);
if (v != NULL) FreeTrainTrackReservation(v);
}
DoClearSquare(tile);
DoClearSquare(endtile);
/* cannot use INVALID_DIAGDIR for signal update because the tunnel doesn't exist anymore */
AddSideToSignalBuffer(tile, ReverseDiagDir(dir), owner);
AddSideToSignalBuffer(endtile, dir, owner);
YapfNotifyTrackLayoutChange(tile, track);
YapfNotifyTrackLayoutChange(endtile, track);
if (v != NULL) TryPathReserve(v);
} else {
DoClearSquare(tile);
DoClearSquare(endtile);
}
}
return CommandCost(EXPENSES_CONSTRUCTION, _price[PR_CLEAR_TUNNEL] * (GetTunnelBridgeLength(tile, endtile) + 2));
}
/**
* Remove a bridge from the game, update town rating, etc.
* @param tile Tile containing one of the endpoints of the bridge.
* @param flags Command flags.
* @return Succeeded or failed command.
*/
static CommandCost DoClearBridge(TileIndex tile, DoCommandFlag flags)
{
CommandCost ret = CheckAllowRemoveTunnelBridge(tile);
if (ret.Failed()) return ret;
TileIndex endtile = GetOtherBridgeEnd(tile);
ret = TunnelBridgeIsFree(tile, endtile);
if (ret.Failed()) return ret;
DiagDirection direction = GetTunnelBridgeDirection(tile);
TileIndexDiff delta = TileOffsByDiagDir(direction);
Town *t = NULL;
if (IsTileOwner(tile, OWNER_TOWN) && _game_mode != GM_EDITOR) {
t = ClosestTownFromTile(tile, UINT_MAX); // town penalty rating
/* Check if you are allowed to remove the bridge owned by a town
* Removal depends on difficulty settings */
CommandCost ret = CheckforTownRating(flags, t, TUNNELBRIDGE_REMOVE);
if (ret.Failed()) return ret;
}
/* checks if the owner is town then decrease town rating by RATING_TUNNEL_BRIDGE_DOWN_STEP until
* you have a "Poor" (0) town rating */
if (IsTileOwner(tile, OWNER_TOWN) && _game_mode != GM_EDITOR) {
ChangeTownRating(t, RATING_TUNNEL_BRIDGE_DOWN_STEP, RATING_TUNNEL_BRIDGE_MINIMUM, flags);
}
Money base_cost = (GetTunnelBridgeTransportType(tile) != TRANSPORT_WATER) ? _price[PR_CLEAR_BRIDGE] : _price[PR_CLEAR_AQUEDUCT];
if (flags & DC_EXEC) {
/* read this value before actual removal of bridge */
bool rail = GetTunnelBridgeTransportType(tile) == TRANSPORT_RAIL;
Owner owner = GetTileOwner(tile);
uint height = GetBridgeHeight(tile);
Train *v = NULL;
if (rail && HasTunnelBridgeReservation(tile)) {
v = GetTrainForReservation(tile, DiagDirToDiagTrack(direction));
if (v != NULL) FreeTrainTrackReservation(v);
}
DoClearSquare(tile);
DoClearSquare(endtile);
for (TileIndex c = tile + delta; c != endtile; c += delta) {
/* do not let trees appear from 'nowhere' after removing bridge */
if (IsNormalRoadTile(c) && GetRoadside(c) == ROADSIDE_TREES) {
uint minz = GetTileMaxZ(c) + 3 * TILE_HEIGHT;
if (height < minz) SetRoadside(c, ROADSIDE_PAVED);
}
ClearBridgeMiddle(c);
MarkTileDirtyByTile(c);
}
if (rail) {
/* cannot use INVALID_DIAGDIR for signal update because the bridge doesn't exist anymore */
AddSideToSignalBuffer(tile, ReverseDiagDir(direction), owner);
AddSideToSignalBuffer(endtile, direction, owner);
Track track = DiagDirToDiagTrack(direction);
YapfNotifyTrackLayoutChange(tile, track);
YapfNotifyTrackLayoutChange(endtile, track);
if (v != NULL) TryPathReserve(v, true);
}
}
return CommandCost(EXPENSES_CONSTRUCTION, (GetTunnelBridgeLength(tile, endtile) + 2) * base_cost);
}
/**
* Remove a tunnel or a bridge from the game.
* @param tile Tile containing one of the endpoints.
* @param flags Command flags.
* @return Succeeded or failed command.
*/
static CommandCost ClearTile_TunnelBridge(TileIndex tile, DoCommandFlag flags)
{
if (IsTunnel(tile)) {
if (flags & DC_AUTO) return_cmd_error(STR_ERROR_MUST_DEMOLISH_TUNNEL_FIRST);
return DoClearTunnel(tile, flags);
} else { // IsBridge(tile)
if (flags & DC_AUTO) return_cmd_error(STR_ERROR_MUST_DEMOLISH_BRIDGE_FIRST);
return DoClearBridge(tile, flags);
}
}
/**
* Draw a single pillar sprite.
* @param psid Pillarsprite
* @param x Pillar X
* @param y Pillar Y
* @param z Pillar Z
* @param w Bounding box size in X direction
* @param h Bounding box size in Y direction
* @param subsprite Optional subsprite for drawing halfpillars
*/
static inline void DrawPillar(const PalSpriteID *psid, int x, int y, int z, int w, int h, const SubSprite *subsprite)
{
static const int PILLAR_Z_OFFSET = TILE_HEIGHT - BRIDGE_Z_START; ///< Start offset of pillar wrt. bridge (downwards)
AddSortableSpriteToDraw(psid->sprite, psid->pal, x, y, w, h, BB_HEIGHT_UNDER_BRIDGE - PILLAR_Z_OFFSET, z, IsTransparencySet(TO_BRIDGES), 0, 0, -PILLAR_Z_OFFSET, subsprite);
}
/**
* Draw two bridge pillars (north and south).
* @param z_bottom Bottom Z
* @param z_top Top Z
* @param psid Pillarsprite
* @param x Pillar X
* @param y Pillar Y
* @param w Bounding box size in X direction
* @param h Bounding box size in Y direction
* @return Reached Z at the bottom
*/
static int DrawPillarColumn(int z_bottom, int z_top, const PalSpriteID *psid, int x, int y, int w, int h)
{
int cur_z;
for (cur_z = z_top; cur_z >= z_bottom; cur_z -= TILE_HEIGHT) {
DrawPillar(psid, x, y, cur_z, w, h, NULL);
}
return cur_z;
}
/**
* Draws the pillars under high bridges.
*
* @param psid Image and palette of a bridge pillar.
* @param ti #TileInfo of current bridge-middle-tile.
* @param axis Orientation of bridge.
* @param drawfarpillar Whether to draw the pillar at the back
* @param x Sprite X position of front pillar.
* @param y Sprite Y position of front pillar.
* @param z_bridge Absolute height of bridge bottom.
*/
static void DrawBridgePillars(const PalSpriteID *psid, const TileInfo *ti, Axis axis, bool drawfarpillar, int x, int y, int z_bridge)
{
static const int bounding_box_size[2] = {16, 2}; ///< bounding box size of pillars along bridge direction
static const int back_pillar_offset[2] = { 0, 9}; ///< sprite position offset of back facing pillar
static const int INF = 1000; ///< big number compared to sprite size
static const SubSprite half_pillar_sub_sprite[2][2] = {
{ { -14, -INF, INF, INF }, { -INF, -INF, -15, INF } }, // X axis, north and south
{ { -INF, -INF, 15, INF }, { 16, -INF, INF, INF } }, // Y axis, north and south
};
if (psid->sprite == 0) return;
/* Determine ground height under pillars */
DiagDirection south_dir = AxisToDiagDir(axis);
int z_front_north = ti->z;
int z_back_north = ti->z;
int z_front_south = ti->z;
int z_back_south = ti->z;
GetSlopeZOnEdge(ti->tileh, south_dir, &z_front_south, &z_back_south);
GetSlopeZOnEdge(ti->tileh, ReverseDiagDir(south_dir), &z_front_north, &z_back_north);
/* Shared height of pillars */
int z_front = max(z_front_north, z_front_south);
int z_back = max(z_back_north, z_back_south);
/* x and y size of bounding-box of pillars */
int w = bounding_box_size[axis];
int h = bounding_box_size[OtherAxis(axis)];
/* sprite position of back facing pillar */
int x_back = x - back_pillar_offset[axis];
int y_back = y - back_pillar_offset[OtherAxis(axis)];
/* Draw front pillars */
int bottom_z = DrawPillarColumn(z_front, z_bridge, psid, x, y, w, h);
if (z_front_north < z_front) DrawPillar(psid, x, y, bottom_z, w, h, &half_pillar_sub_sprite[axis][0]);
if (z_front_south < z_front) DrawPillar(psid, x, y, bottom_z, w, h, &half_pillar_sub_sprite[axis][1]);
/* Draw back pillars, skip top two parts, which are hidden by the bridge */
int z_bridge_back = z_bridge - 2 * (int)TILE_HEIGHT;
if (drawfarpillar && (z_back_north <= z_bridge_back || z_back_south <= z_bridge_back)) {
bottom_z = DrawPillarColumn(z_back, z_bridge_back, psid, x_back, y_back, w, h);
if (z_back_north < z_back) DrawPillar(psid, x_back, y_back, bottom_z, w, h, &half_pillar_sub_sprite[axis][0]);
if (z_back_south < z_back) DrawPillar(psid, x_back, y_back, bottom_z, w, h, &half_pillar_sub_sprite[axis][1]);
}
}
/**
* Draws the trambits over an already drawn (lower end) of a bridge.
* @param x the x of the bridge
* @param y the y of the bridge
* @param z the z of the bridge
* @param offset number representing whether to level or sloped and the direction
* @param overlay do we want to still see the road?
* @param head are we drawing bridge head?
*/
static void DrawBridgeTramBits(int x, int y, byte z, int offset, bool overlay, bool head)
{
static const SpriteID tram_offsets[2][6] = { { 107, 108, 109, 110, 111, 112 }, { 4, 5, 15, 16, 17, 18 } };
static const SpriteID back_offsets[6] = { 95, 96, 99, 102, 100, 101 };
static const SpriteID front_offsets[6] = { 97, 98, 103, 106, 104, 105 };
static const uint size_x[6] = { 1, 16, 16, 1, 16, 1 };
static const uint size_y[6] = { 16, 1, 1, 16, 1, 16 };
static const uint front_bb_offset_x[6] = { 15, 0, 0, 15, 0, 15 };
static const uint front_bb_offset_y[6] = { 0, 15, 15, 0, 15, 0 };
/* The sprites under the vehicles are drawn as SpriteCombine. StartSpriteCombine() has already been called
* The bounding boxes here are the same as for bridge front/roof */
if (head || !IsInvisibilitySet(TO_BRIDGES)) {
AddSortableSpriteToDraw(SPR_TRAMWAY_BASE + tram_offsets[overlay][offset], PAL_NONE,
x, y, size_x[offset], size_y[offset], 0x28, z,
!head && IsTransparencySet(TO_BRIDGES));
}
/* Do not draw catenary if it is set invisible */
if (!IsInvisibilitySet(TO_CATENARY)) {
AddSortableSpriteToDraw(SPR_TRAMWAY_BASE + back_offsets[offset], PAL_NONE,
x, y, size_x[offset], size_y[offset], 0x28, z,
IsTransparencySet(TO_CATENARY));
}
/* Start a new SpriteCombine for the front part */
EndSpriteCombine();
StartSpriteCombine();
/* For sloped sprites the bounding box needs to be higher, as the pylons stop on a higher point */
if (!IsInvisibilitySet(TO_CATENARY)) {
AddSortableSpriteToDraw(SPR_TRAMWAY_BASE + front_offsets[offset], PAL_NONE,
x, y, size_x[offset] + front_bb_offset_x[offset], size_y[offset] + front_bb_offset_y[offset], 0x28, z,
IsTransparencySet(TO_CATENARY), front_bb_offset_x[offset], front_bb_offset_y[offset]);
}
}
/**
* Draws a tunnel of bridge tile.
* For tunnels, this is rather simple, as you only needa draw the entrance.
* Bridges are a bit more complex. base_offset is where the sprite selection comes into play
* and it works a bit like a bitmask. For bridge heads:
* @param ti TileInfo of the structure to draw
*
- Bit 0: direction
* - Bit 1: northern or southern heads
* - Bit 2: Set if the bridge head is sloped
* - Bit 3 and more: Railtype Specific subset
*
* Please note that in this code, "roads" are treated as railtype 1, whilst the real railtypes are 0, 2 and 3
*/
static void DrawTile_TunnelBridge(TileInfo *ti)
{
TransportType transport_type = GetTunnelBridgeTransportType(ti->tile);
DiagDirection tunnelbridge_direction = GetTunnelBridgeDirection(ti->tile);
if (IsTunnel(ti->tile)) {
/* Front view of tunnel bounding boxes:
*
* 122223 <- BB_Z_SEPARATOR
* 1 3
* 1 3 1,3 = empty helper BB
* 1 3 2 = SpriteCombine of tunnel-roof and catenary (tram & elrail)
*
*/
static const int _tunnel_BB[4][12] = {
/* tunnnel-roof | Z-separator | tram-catenary
* w h bb_x bb_y| x y w h |bb_x bb_y w h */
{ 1, 0, -15, -14, 0, 15, 16, 1, 0, 1, 16, 15 }, // NE
{ 0, 1, -14, -15, 15, 0, 1, 16, 1, 0, 15, 16 }, // SE
{ 1, 0, -15, -14, 0, 15, 16, 1, 0, 1, 16, 15 }, // SW
{ 0, 1, -14, -15, 15, 0, 1, 16, 1, 0, 15, 16 }, // NW
};
const int *BB_data = _tunnel_BB[tunnelbridge_direction];
bool catenary = false;
SpriteID image;
if (transport_type == TRANSPORT_RAIL) {
image = GetRailTypeInfo(GetRailType(ti->tile))->base_sprites.tunnel;
} else {
image = SPR_TUNNEL_ENTRY_REAR_ROAD;
}
if (HasTunnelBridgeSnowOrDesert(ti->tile)) image += 32;
image += tunnelbridge_direction * 2;
DrawGroundSprite(image, PAL_NONE);
/* PBS debugging, draw reserved tracks darker */
if (_game_mode != GM_MENU && _settings_client.gui.show_track_reservation && (transport_type == TRANSPORT_RAIL && HasTunnelBridgeReservation(ti->tile))) {
const RailtypeInfo *rti = GetRailTypeInfo(GetRailType(ti->tile));
DrawGroundSprite(DiagDirToAxis(tunnelbridge_direction) == AXIS_X ? rti->base_sprites.single_x : rti->base_sprites.single_y, PALETTE_CRASH);
}
if (transport_type == TRANSPORT_ROAD) {
RoadTypes rts = GetRoadTypes(ti->tile);
if (HasBit(rts, ROADTYPE_TRAM)) {
static const SpriteID tunnel_sprites[2][4] = { { 28, 78, 79, 27 }, { 5, 76, 77, 4 } };
DrawGroundSprite(SPR_TRAMWAY_BASE + tunnel_sprites[rts - ROADTYPES_TRAM][tunnelbridge_direction], PAL_NONE);
/* Do not draw wires if they are invisible */
if (!IsInvisibilitySet(TO_CATENARY)) {
catenary = true;
StartSpriteCombine();
AddSortableSpriteToDraw(SPR_TRAMWAY_TUNNEL_WIRES + tunnelbridge_direction, PAL_NONE, ti->x, ti->y, BB_data[10], BB_data[11], TILE_HEIGHT, ti->z, IsTransparencySet(TO_CATENARY), BB_data[8], BB_data[9], BB_Z_SEPARATOR);
}
}
} else {
const RailtypeInfo *rti = GetRailTypeInfo(GetRailType(ti->tile));
if (rti->UsesOverlay()) {
SpriteID surface = GetCustomRailSprite(rti, ti->tile, RTSG_TUNNEL);
if (surface != 0) DrawGroundSprite(surface + tunnelbridge_direction, PAL_NONE);
}
if (HasCatenaryDrawn(GetRailType(ti->tile))) {
/* Maybe draw pylons on the entry side */
DrawCatenary(ti);
catenary = true;
StartSpriteCombine();
/* Draw wire above the ramp */
DrawCatenaryOnTunnel(ti);
}
}
AddSortableSpriteToDraw(image + 1, PAL_NONE, ti->x + TILE_SIZE - 1, ti->y + TILE_SIZE - 1, BB_data[0], BB_data[1], TILE_HEIGHT, ti->z, false, BB_data[2], BB_data[3], BB_Z_SEPARATOR);
if (catenary) EndSpriteCombine();
/* Add helper BB for sprite sorting, that separate the tunnel from things beside of it */
AddSortableSpriteToDraw(SPR_EMPTY_BOUNDING_BOX, PAL_NONE, ti->x, ti->y, BB_data[6], BB_data[7], TILE_HEIGHT, ti->z);
AddSortableSpriteToDraw(SPR_EMPTY_BOUNDING_BOX, PAL_NONE, ti->x + BB_data[4], ti->y + BB_data[5], BB_data[6], BB_data[7], TILE_HEIGHT, ti->z);
DrawBridgeMiddle(ti);
} else { // IsBridge(ti->tile)
const PalSpriteID *psid;
int base_offset;
bool ice = HasTunnelBridgeSnowOrDesert(ti->tile);
if (transport_type == TRANSPORT_RAIL) {
base_offset = GetRailTypeInfo(GetRailType(ti->tile))->bridge_offset;
assert(base_offset != 8); // This one is used for roads
} else {
base_offset = 8;
}
/* as the lower 3 bits are used for other stuff, make sure they are clear */
assert( (base_offset & 0x07) == 0x00);
DrawFoundation(ti, GetBridgeFoundation(ti->tileh, DiagDirToAxis(tunnelbridge_direction)));
/* HACK Wizardry to convert the bridge ramp direction into a sprite offset */
base_offset += (6 - tunnelbridge_direction) % 4;
if (ti->tileh == SLOPE_FLAT) base_offset += 4; // sloped bridge head
/* Table number BRIDGE_PIECE_HEAD always refers to the bridge heads for any bridge type */
if (transport_type != TRANSPORT_WATER) {
psid = &GetBridgeSpriteTable(GetBridgeType(ti->tile), BRIDGE_PIECE_HEAD)[base_offset];
} else {
psid = _aqueduct_sprites + base_offset;
}
if (!ice) {
DrawClearLandTile(ti, 3);
} else {
DrawGroundSprite(SPR_FLAT_SNOW_DESERT_TILE + SlopeToSpriteOffset(ti->tileh), PAL_NONE);
}
/* draw ramp */
/* Draw Trambits and PBS Reservation as SpriteCombine */
if (transport_type == TRANSPORT_ROAD || transport_type == TRANSPORT_RAIL) StartSpriteCombine();
/* HACK set the height of the BB of a sloped ramp to 1 so a vehicle on
* it doesn't disappear behind it
*/
/* Bridge heads are drawn solid no matter how invisibility/transparency is set */
AddSortableSpriteToDraw(psid->sprite, psid->pal, ti->x, ti->y, 16, 16, ti->tileh == SLOPE_FLAT ? 0 : 8, ti->z);
if (transport_type == TRANSPORT_ROAD) {
RoadTypes rts = GetRoadTypes(ti->tile);
if (HasBit(rts, ROADTYPE_TRAM)) {
uint offset = tunnelbridge_direction;
uint z = ti->z;
if (ti->tileh != SLOPE_FLAT) {
offset = (offset + 1) & 1;
z += TILE_HEIGHT;
} else {
offset += 2;
}
/* DrawBridgeTramBits() calls EndSpriteCombine() and StartSpriteCombine() */
DrawBridgeTramBits(ti->x, ti->y, z, offset, HasBit(rts, ROADTYPE_ROAD), true);
}
EndSpriteCombine();
} else if (transport_type == TRANSPORT_RAIL) {
const RailtypeInfo *rti = GetRailTypeInfo(GetRailType(ti->tile));
if (rti->UsesOverlay()) {
SpriteID surface = GetCustomRailSprite(rti, ti->tile, RTSG_BRIDGE);
if (surface != 0) {
if (HasBridgeFlatRamp(ti->tileh, DiagDirToAxis(tunnelbridge_direction))) {
AddSortableSpriteToDraw(surface + ((DiagDirToAxis(tunnelbridge_direction) == AXIS_X) ? RTBO_X : RTBO_Y), PAL_NONE, ti->x, ti->y, 16, 16, 0, ti->z + 8);
} else {
AddSortableSpriteToDraw(surface + RTBO_SLOPE + tunnelbridge_direction, PAL_NONE, ti->x, ti->y, 16, 16, 8, ti->z);
}
}
/* Don't fallback to non-overlay sprite -- the spec states that
* if an overlay is present then the bridge surface must be
* present. */
} else if (_game_mode != GM_MENU &&_settings_client.gui.show_track_reservation && HasTunnelBridgeReservation(ti->tile)) {
if (HasBridgeFlatRamp(ti->tileh, DiagDirToAxis(tunnelbridge_direction))) {
AddSortableSpriteToDraw(DiagDirToAxis(tunnelbridge_direction) == AXIS_X ? rti->base_sprites.single_x : rti->base_sprites.single_y, PALETTE_CRASH, ti->x, ti->y, 16, 16, 0, ti->z + 8);
} else {
AddSortableSpriteToDraw(rti->base_sprites.single_sloped + tunnelbridge_direction, PALETTE_CRASH, ti->x, ti->y, 16, 16, 8, ti->z);
}
}
EndSpriteCombine();
if (HasCatenaryDrawn(GetRailType(ti->tile))) {
DrawCatenary(ti);
}
}
DrawBridgeMiddle(ti);
}
}
/**
* Compute bridge piece. Computes the bridge piece to display depending on the position inside the bridge.
* bridges pieces sequence (middle parts).
* Note that it is not covering the bridge heads, which are always referenced by the same sprite table.
* bridge len 1: BRIDGE_PIECE_NORTH
* bridge len 2: BRIDGE_PIECE_NORTH BRIDGE_PIECE_SOUTH
* bridge len 3: BRIDGE_PIECE_NORTH BRIDGE_PIECE_MIDDLE_ODD BRIDGE_PIECE_SOUTH
* bridge len 4: BRIDGE_PIECE_NORTH BRIDGE_PIECE_INNER_NORTH BRIDGE_PIECE_INNER_SOUTH BRIDGE_PIECE_SOUTH
* bridge len 5: BRIDGE_PIECE_NORTH BRIDGE_PIECE_INNER_NORTH BRIDGE_PIECE_MIDDLE_EVEN BRIDGE_PIECE_INNER_SOUTH BRIDGE_PIECE_SOUTH
* bridge len 6: BRIDGE_PIECE_NORTH BRIDGE_PIECE_INNER_NORTH BRIDGE_PIECE_INNER_SOUTH BRIDGE_PIECE_INNER_NORTH BRIDGE_PIECE_INNER_SOUTH BRIDGE_PIECE_SOUTH
* bridge len 7: BRIDGE_PIECE_NORTH BRIDGE_PIECE_INNER_NORTH BRIDGE_PIECE_INNER_SOUTH BRIDGE_PIECE_MIDDLE_ODD BRIDGE_PIECE_INNER_NORTH BRIDGE_PIECE_INNER_SOUTH BRIDGE_PIECE_SOUTH
* #0 - always as first, #1 - always as last (if len>1)
* #2,#3 are to pair in order
* for odd bridges: #5 is going in the bridge middle if on even position, #4 on odd (counting from 0)
* @param north Northernmost tile of bridge
* @param south Southernmost tile of bridge
* @return Index of bridge piece
*/
static BridgePieces CalcBridgePiece(uint north, uint south)
{
if (north == 1) {
return BRIDGE_PIECE_NORTH;
} else if (south == 1) {
return BRIDGE_PIECE_SOUTH;
} else if (north < south) {
return north & 1 ? BRIDGE_PIECE_INNER_SOUTH : BRIDGE_PIECE_INNER_NORTH;
} else if (north > south) {
return south & 1 ? BRIDGE_PIECE_INNER_NORTH : BRIDGE_PIECE_INNER_SOUTH;
} else {
return north & 1 ? BRIDGE_PIECE_MIDDLE_EVEN : BRIDGE_PIECE_MIDDLE_ODD;
}
}
void DrawBridgeMiddle(const TileInfo *ti)
{
/* Sectional view of bridge bounding boxes:
*
* 1 2 1,2 = SpriteCombine of Bridge front/(back&floor) and TramCatenary
* 1 2 3 = empty helper BB
* 1 7 2 4,5 = pillars under higher bridges
* 1 6 88888 6 2 6 = elrail-pylons
* 1 6 88888 6 2 7 = elrail-wire
* 1 6 88888 6 2 <- TILE_HEIGHT 8 = rail-vehicle on bridge
* 3333333333333 <- BB_Z_SEPARATOR
* <- unused
* 4 5 <- BB_HEIGHT_UNDER_BRIDGE
* 4 5
* 4 5
*
*/
if (!IsBridgeAbove(ti->tile)) return;
TileIndex rampnorth = GetNorthernBridgeEnd(ti->tile);
TileIndex rampsouth = GetSouthernBridgeEnd(ti->tile);
TransportType transport_type = GetTunnelBridgeTransportType(rampsouth);
Axis axis = GetBridgeAxis(ti->tile);
BridgePieces piece = CalcBridgePiece(
GetTunnelBridgeLength(ti->tile, rampnorth) + 1,
GetTunnelBridgeLength(ti->tile, rampsouth) + 1
);
const PalSpriteID *psid;
bool drawfarpillar;
if (transport_type != TRANSPORT_WATER) {
BridgeType type = GetBridgeType(rampsouth);
drawfarpillar = !HasBit(GetBridgeSpec(type)->flags, 0);
uint base_offset;
if (transport_type == TRANSPORT_RAIL) {
base_offset = GetRailTypeInfo(GetRailType(rampsouth))->bridge_offset;
} else {
base_offset = 8;
}
psid = base_offset + GetBridgeSpriteTable(type, piece);
} else {
drawfarpillar = true;
psid = _aqueduct_sprites;
}
if (axis != AXIS_X) psid += 4;
int x = ti->x;
int y = ti->y;
uint bridge_z = GetBridgeHeight(rampsouth);
uint z = bridge_z - BRIDGE_Z_START;
/* Add a bounding box, that separates the bridge from things below it. */
AddSortableSpriteToDraw(SPR_EMPTY_BOUNDING_BOX, PAL_NONE, x, y, 16, 16, 1, bridge_z - TILE_HEIGHT + BB_Z_SEPARATOR);
/* Draw Trambits as SpriteCombine */
if (transport_type == TRANSPORT_ROAD || transport_type == TRANSPORT_RAIL) StartSpriteCombine();
/* Draw floor and far part of bridge*/
if (!IsInvisibilitySet(TO_BRIDGES)) {
if (axis == AXIS_X) {
AddSortableSpriteToDraw(psid->sprite, psid->pal, x, y, 16, 1, 0x28, z, IsTransparencySet(TO_BRIDGES), 0, 0, BRIDGE_Z_START);
} else {
AddSortableSpriteToDraw(psid->sprite, psid->pal, x, y, 1, 16, 0x28, z, IsTransparencySet(TO_BRIDGES), 0, 0, BRIDGE_Z_START);
}
}
psid++;
if (transport_type == TRANSPORT_ROAD) {
RoadTypes rts = GetRoadTypes(rampsouth);
if (HasBit(rts, ROADTYPE_TRAM)) {
/* DrawBridgeTramBits() calls EndSpriteCombine() and StartSpriteCombine() */
DrawBridgeTramBits(x, y, bridge_z, axis ^ 1, HasBit(rts, ROADTYPE_ROAD), false);
} else {
EndSpriteCombine();
StartSpriteCombine();
}
} else if (transport_type == TRANSPORT_RAIL) {
const RailtypeInfo *rti = GetRailTypeInfo(GetRailType(rampsouth));
if (rti->UsesOverlay()) {
SpriteID surface = GetCustomRailSprite(rti, rampsouth, RTSG_BRIDGE, TCX_ON_BRIDGE);
if (surface != 0) {
AddSortableSpriteToDraw(surface + axis, PAL_NONE, x, y, 16, 16, 0, bridge_z, IsTransparencySet(TO_BRIDGES));
}
}
EndSpriteCombine();
if (HasCatenaryDrawn(GetRailType(rampsouth))) {
DrawCatenaryOnBridge(ti);
}
}
/* draw roof, the component of the bridge which is logically between the vehicle and the camera */
if (!IsInvisibilitySet(TO_BRIDGES)) {
if (axis == AXIS_X) {
y += 12;
if (psid->sprite & SPRITE_MASK) AddSortableSpriteToDraw(psid->sprite, psid->pal, x, y, 16, 4, 0x28, z, IsTransparencySet(TO_BRIDGES), 0, 3, BRIDGE_Z_START);
} else {
x += 12;
if (psid->sprite & SPRITE_MASK) AddSortableSpriteToDraw(psid->sprite, psid->pal, x, y, 4, 16, 0x28, z, IsTransparencySet(TO_BRIDGES), 3, 0, BRIDGE_Z_START);
}
}
/* Draw TramFront as SpriteCombine */
if (transport_type == TRANSPORT_ROAD) EndSpriteCombine();
/* Do not draw anything more if bridges are invisible */
if (IsInvisibilitySet(TO_BRIDGES)) return;
psid++;
if (ti->z + 5 == z) {
/* draw poles below for small bridges */
if (psid->sprite != 0) {
SpriteID image = psid->sprite;
SpriteID pal = psid->pal;
if (IsTransparencySet(TO_BRIDGES)) {
SetBit(image, PALETTE_MODIFIER_TRANSPARENT);
pal = PALETTE_TO_TRANSPARENT;
}
DrawGroundSpriteAt(image, pal, x - ti->x, y - ti->y, z - ti->z);
}
} else if (_settings_client.gui.bridge_pillars) {
/* draw pillars below for high bridges */
DrawBridgePillars(psid, ti, axis, drawfarpillar, x, y, z);
}
}
static uint GetSlopeZ_TunnelBridge(TileIndex tile, uint x, uint y)
{
uint z;
Slope tileh = GetTileSlope(tile, &z);
x &= 0xF;
y &= 0xF;
if (IsTunnel(tile)) {
uint pos = (DiagDirToAxis(GetTunnelBridgeDirection(tile)) == AXIS_X ? y : x);
/* In the tunnel entrance? */
if (5 <= pos && pos <= 10) return z;
} else { // IsBridge(tile)
DiagDirection dir = GetTunnelBridgeDirection(tile);
uint pos = (DiagDirToAxis(dir) == AXIS_X ? y : x);
z += ApplyFoundationToSlope(GetBridgeFoundation(tileh, DiagDirToAxis(dir)), &tileh);
/* On the bridge ramp? */
if (5 <= pos && pos <= 10) {
uint delta;
if (tileh != SLOPE_FLAT) return z + TILE_HEIGHT;
switch (dir) {
default: NOT_REACHED();
case DIAGDIR_NE: delta = (TILE_SIZE - 1 - x) / 2; break;
case DIAGDIR_SE: delta = y / 2; break;
case DIAGDIR_SW: delta = x / 2; break;
case DIAGDIR_NW: delta = (TILE_SIZE - 1 - y) / 2; break;
}
return z + 1 + delta;
}
}
return z + GetPartialZ(x, y, tileh);
}
static Foundation GetFoundation_TunnelBridge(TileIndex tile, Slope tileh)
{
return IsTunnel(tile) ? FOUNDATION_NONE : GetBridgeFoundation(tileh, DiagDirToAxis(GetTunnelBridgeDirection(tile)));
}
static void GetTileDesc_TunnelBridge(TileIndex tile, TileDesc *td)
{
TransportType tt = GetTunnelBridgeTransportType(tile);
if (IsTunnel(tile)) {
td->str = (tt == TRANSPORT_RAIL) ? STR_LAI_TUNNEL_DESCRIPTION_RAILROAD : STR_LAI_TUNNEL_DESCRIPTION_ROAD;
} else { // IsBridge(tile)
td->str = (tt == TRANSPORT_WATER) ? STR_LAI_BRIDGE_DESCRIPTION_AQUEDUCT : GetBridgeSpec(GetBridgeType(tile))->transport_name[tt];
}
td->owner[0] = GetTileOwner(tile);
Owner road_owner = INVALID_OWNER;
Owner tram_owner = INVALID_OWNER;
RoadTypes rts = GetRoadTypes(tile);
if (HasBit(rts, ROADTYPE_ROAD)) road_owner = GetRoadOwner(tile, ROADTYPE_ROAD);
if (HasBit(rts, ROADTYPE_TRAM)) tram_owner = GetRoadOwner(tile, ROADTYPE_TRAM);
/* Is there a mix of owners? */
if ((tram_owner != INVALID_OWNER && tram_owner != td->owner[0]) ||
(road_owner != INVALID_OWNER && road_owner != td->owner[0])) {
uint i = 1;
if (road_owner != INVALID_OWNER) {
td->owner_type[i] = STR_LAND_AREA_INFORMATION_ROAD_OWNER;
td->owner[i] = road_owner;
i++;
}
if (tram_owner != INVALID_OWNER) {
td->owner_type[i] = STR_LAND_AREA_INFORMATION_TRAM_OWNER;
td->owner[i] = tram_owner;
}
}
if (tt == TRANSPORT_RAIL) {
const RailtypeInfo *rti = GetRailTypeInfo(GetRailType(tile));
td->rail_speed = rti->max_speed;
if (!IsTunnel(tile)) {
uint16 spd = GetBridgeSpec(GetBridgeType(tile))->speed;
if (td->rail_speed == 0 || spd < td->rail_speed) {
td->rail_speed = spd;
}
}
}
}
static void TileLoop_TunnelBridge(TileIndex tile)
{
bool snow_or_desert = HasTunnelBridgeSnowOrDesert(tile);
switch (_settings_game.game_creation.landscape) {
case LT_ARCTIC: {
/* As long as we do not have a snow density, we want to use the density
* from the entry endge. For tunnels this is the lowest point for bridges the highest point.
* (Independent of foundations) */
uint z = IsBridge(tile) ? GetTileMaxZ(tile) : GetTileZ(tile);
if (snow_or_desert != (z > GetSnowLine())) {
SetTunnelBridgeSnowOrDesert(tile, !snow_or_desert);
MarkTileDirtyByTile(tile);
}
break;
}
case LT_TROPIC:
if (GetTropicZone(tile) == TROPICZONE_DESERT && !snow_or_desert) {
SetTunnelBridgeSnowOrDesert(tile, true);
MarkTileDirtyByTile(tile);
}
break;
default:
break;
}
}
static TrackStatus GetTileTrackStatus_TunnelBridge(TileIndex tile, TransportType mode, uint sub_mode, DiagDirection side)
{
TransportType transport_type = GetTunnelBridgeTransportType(tile);
if (transport_type != mode || (transport_type == TRANSPORT_ROAD && (GetRoadTypes(tile) & sub_mode) == 0)) return 0;
DiagDirection dir = GetTunnelBridgeDirection(tile);
if (side != INVALID_DIAGDIR && side != ReverseDiagDir(dir)) return 0;
return CombineTrackStatus(TrackBitsToTrackdirBits(DiagDirToDiagTrackBits(dir)), TRACKDIR_BIT_NONE);
}
static void ChangeTileOwner_TunnelBridge(TileIndex tile, Owner old_owner, Owner new_owner)
{
for (RoadType rt = ROADTYPE_ROAD; rt < ROADTYPE_END; rt++) {
/* Update all roadtypes, no matter if they are present */
if (GetRoadOwner(tile, rt) == old_owner) {
SetRoadOwner(tile, rt, new_owner == INVALID_OWNER ? OWNER_NONE : new_owner);
}
}
if (!IsTileOwner(tile, old_owner)) return;
if (new_owner != INVALID_OWNER) {
SetTileOwner(tile, new_owner);
} else {
if (DoCommand(tile, 0, 0, DC_EXEC | DC_BANKRUPT, CMD_LANDSCAPE_CLEAR).Failed()) {
/* When clearing the bridge/tunnel failed there are still vehicles on/in
* the bridge/tunnel. As all *our* vehicles are already removed, they
* must be of another owner. Therefore this can't be rail tunnel/bridge.
* In that case we can safely reassign the ownership to OWNER_NONE. */
assert(GetTunnelBridgeTransportType(tile) != TRANSPORT_RAIL);
SetTileOwner(tile, OWNER_NONE);
}
}
}
static const byte _tunnel_fractcoord_1[4] = {0x8E, 0x18, 0x81, 0xE8};
static const byte _tunnel_fractcoord_2[4] = {0x81, 0x98, 0x87, 0x38};
static const byte _tunnel_fractcoord_3[4] = {0x82, 0x88, 0x86, 0x48};
static const byte _exit_tunnel_track[4] = {1, 2, 1, 2};
/** Get the trackdir of the exit of a tunnel */
static const Trackdir _road_exit_tunnel_state[DIAGDIR_END] = {
TRACKDIR_X_SW, TRACKDIR_Y_NW, TRACKDIR_X_NE, TRACKDIR_Y_SE
};
static const byte _road_exit_tunnel_frame[4] = {2, 7, 9, 4};
static const byte _tunnel_fractcoord_4[4] = {0x52, 0x85, 0x98, 0x29};
static const byte _tunnel_fractcoord_5[4] = {0x92, 0x89, 0x58, 0x25};
static const byte _tunnel_fractcoord_6[4] = {0x92, 0x89, 0x56, 0x45};
static const byte _tunnel_fractcoord_7[4] = {0x52, 0x85, 0x96, 0x49};
static VehicleEnterTileStatus VehicleEnter_TunnelBridge(Vehicle *v, TileIndex tile, int x, int y)
{
int z = GetSlopeZ(x, y) - v->z_pos;
if (abs(z) > 2) return VETSB_CANNOT_ENTER;
/* Direction into the wormhole */
const DiagDirection dir = GetTunnelBridgeDirection(tile);
/* Direction of the vehicle */
const DiagDirection vdir = DirToDiagDir(v->direction);
if (IsTunnel(tile)) {
byte fc = (x & 0xF) + (y << 4);
if (v->type == VEH_TRAIN) {
Train *t = Train::From(v);
if (t->track != TRACK_BIT_WORMHOLE && dir == vdir) {
if (t->IsFrontEngine() && fc == _tunnel_fractcoord_1[dir]) {
if (!PlayVehicleSound(t, VSE_TUNNEL) && RailVehInfo(t->engine_type)->engclass == 0) {
SndPlayVehicleFx(SND_05_TRAIN_THROUGH_TUNNEL, v);
}
return VETSB_CONTINUE;
}
if (fc == _tunnel_fractcoord_2[dir]) {
t->tile = tile;
t->track = TRACK_BIT_WORMHOLE;
t->vehstatus |= VS_HIDDEN;
return VETSB_ENTERED_WORMHOLE;
}
}
if (dir == ReverseDiagDir(vdir) && fc == _tunnel_fractcoord_3[dir] && z == 0) {
/* We're at the tunnel exit ?? */
t->tile = tile;
t->track = (TrackBits)_exit_tunnel_track[dir];
assert(t->track);
t->vehstatus &= ~VS_HIDDEN;
return VETSB_ENTERED_WORMHOLE;
}
} else if (v->type == VEH_ROAD) {
RoadVehicle *rv = RoadVehicle::From(v);
/* Enter tunnel? */
if (rv->state != RVSB_WORMHOLE && dir == vdir) {
if (fc == _tunnel_fractcoord_4[dir] ||
fc == _tunnel_fractcoord_5[dir]) {
rv->tile = tile;
rv->state = RVSB_WORMHOLE;
rv->vehstatus |= VS_HIDDEN;
return VETSB_ENTERED_WORMHOLE;
} else {
return VETSB_CONTINUE;
}
}
if (dir == ReverseDiagDir(vdir) && (
/* We're at the tunnel exit ?? */
fc == _tunnel_fractcoord_6[dir] ||
fc == _tunnel_fractcoord_7[dir]
) &&
z == 0) {
rv->tile = tile;
rv->state = _road_exit_tunnel_state[dir];
rv->frame = _road_exit_tunnel_frame[dir];
rv->vehstatus &= ~VS_HIDDEN;
return VETSB_ENTERED_WORMHOLE;
}
}
} else { // IsBridge(tile)
if (v->IsPrimaryVehicle() && v->type != VEH_SHIP) {
/* modify speed of vehicle */
uint16 spd = GetBridgeSpec(GetBridgeType(tile))->speed;
if (v->type == VEH_ROAD) spd *= 2;
if (v->cur_speed > spd) v->cur_speed = spd;
}
if (vdir == dir) {
switch (dir) {
default: NOT_REACHED();
case DIAGDIR_NE: if ((x & 0xF) != 0) return VETSB_CONTINUE; break;
case DIAGDIR_SE: if ((y & 0xF) != TILE_SIZE - 1) return VETSB_CONTINUE; break;
case DIAGDIR_SW: if ((x & 0xF) != TILE_SIZE - 1) return VETSB_CONTINUE; break;
case DIAGDIR_NW: if ((y & 0xF) != 0) return VETSB_CONTINUE; break;
}
switch (v->type) {
case VEH_TRAIN: {
Train *t = Train::From(v);
t->track = TRACK_BIT_WORMHOLE;
ClrBit(t->gv_flags, GVF_GOINGUP_BIT);
ClrBit(t->gv_flags, GVF_GOINGDOWN_BIT);
break;
}
case VEH_ROAD: {
RoadVehicle *rv = RoadVehicle::From(v);
rv->state = RVSB_WORMHOLE;
/* There are no slopes inside bridges / tunnels. */
ClrBit(rv->gv_flags, GVF_GOINGUP_BIT);
ClrBit(rv->gv_flags, GVF_GOINGDOWN_BIT);
break;
}
case VEH_SHIP:
Ship::From(v)->state = TRACK_BIT_WORMHOLE;
break;
default: NOT_REACHED();
}
return VETSB_ENTERED_WORMHOLE;
} else if (vdir == ReverseDiagDir(dir)) {
v->tile = tile;
switch (v->type) {
case VEH_TRAIN: {
Train *t = Train::From(v);
if (t->track == TRACK_BIT_WORMHOLE) {
t->track = (DiagDirToAxis(dir) == AXIS_X ? TRACK_BIT_X : TRACK_BIT_Y);
return VETSB_ENTERED_WORMHOLE;
}
break;
}
case VEH_ROAD: {
RoadVehicle *rv = RoadVehicle::From(v);
if (rv->state == RVSB_WORMHOLE) {
rv->state = _road_exit_tunnel_state[dir];
rv->frame = 0;
return VETSB_ENTERED_WORMHOLE;
}
break;
}
case VEH_SHIP: {
Ship *ship = Ship::From(v);
if (ship->state == TRACK_BIT_WORMHOLE) {
ship->state = (DiagDirToAxis(dir) == AXIS_X ? TRACK_BIT_X : TRACK_BIT_Y);
return VETSB_ENTERED_WORMHOLE;
}
break;
}
default: NOT_REACHED();
}
}
}
return VETSB_CONTINUE;
}
static CommandCost TerraformTile_TunnelBridge(TileIndex tile, DoCommandFlag flags, uint z_new, Slope tileh_new)
{
if (_settings_game.construction.build_on_slopes && AutoslopeEnabled() && IsBridge(tile) && GetTunnelBridgeTransportType(tile) != TRANSPORT_WATER) {
DiagDirection direction = GetTunnelBridgeDirection(tile);
Axis axis = DiagDirToAxis(direction);
CommandCost res;
uint z_old;
Slope tileh_old = GetTileSlope(tile, &z_old);
/* Check if new slope is valid for bridges in general (so we can safely call GetBridgeFoundation()) */
if ((direction == DIAGDIR_NW) || (direction == DIAGDIR_NE)) {
CheckBridgeSlopeSouth(axis, &tileh_old, &z_old);
res = CheckBridgeSlopeSouth(axis, &tileh_new, &z_new);
} else {
CheckBridgeSlopeNorth(axis, &tileh_old, &z_old);
res = CheckBridgeSlopeNorth(axis, &tileh_new, &z_new);
}
/* Surface slope is valid and remains unchanged? */
if (res.Succeeded() && (z_old == z_new) && (tileh_old == tileh_new)) return CommandCost(EXPENSES_CONSTRUCTION, _price[PR_BUILD_FOUNDATION]);
}
return DoCommand(tile, 0, 0, flags, CMD_LANDSCAPE_CLEAR);
}
extern const TileTypeProcs _tile_type_tunnelbridge_procs = {
DrawTile_TunnelBridge, // draw_tile_proc
GetSlopeZ_TunnelBridge, // get_slope_z_proc
ClearTile_TunnelBridge, // clear_tile_proc
NULL, // add_accepted_cargo_proc
GetTileDesc_TunnelBridge, // get_tile_desc_proc
GetTileTrackStatus_TunnelBridge, // get_tile_track_status_proc
NULL, // click_tile_proc
NULL, // animate_tile_proc
TileLoop_TunnelBridge, // tile_loop_clear
ChangeTileOwner_TunnelBridge, // change_tile_owner_clear
NULL, // add_produced_cargo_proc
VehicleEnter_TunnelBridge, // vehicle_enter_tile_proc
GetFoundation_TunnelBridge, // get_foundation_proc
TerraformTile_TunnelBridge, // terraform_tile_proc
};