/* $Id$ */ /* * This file is part of OpenTTD. * OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2. * OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>. */ /** @file rail.h Rail specific functions. */ #ifndef RAIL_H #define RAIL_H #include "rail_type.h" #include "track_type.h" #include "gfx_type.h" #include "core/bitmath_func.hpp" #include "economy_func.h" #include "slope_type.h" #include "strings_type.h" #include "date_type.h" #include "core/math_func.hpp" /** Railtype flags. */ enum RailTypeFlags { RTF_CATENARY = 0, ///< Bit number for drawing a catenary. RTF_NO_LEVEL_CROSSING = 1, ///< Bit number for disallowing level crossings. RTFB_NONE = 0, ///< All flags cleared. RTFB_CATENARY = 1 << RTF_CATENARY, ///< Value for drawing a catenary. RTFB_NO_LEVEL_CROSSING = 1 << RTF_NO_LEVEL_CROSSING, ///< Value for disallowing level crossings. }; DECLARE_ENUM_AS_BIT_SET(RailTypeFlags) struct SpriteGroup; /** Sprite groups for a railtype. */ enum RailTypeSpriteGroup { RTSG_CURSORS, ///< Cursor and toolbar icon images RTSG_OVERLAY, ///< Images for overlaying track RTSG_GROUND, ///< Main group of ground images RTSG_TUNNEL, ///< Main group of ground images for snow or desert RTSG_WIRES, ///< Catenary wires RTSG_PYLONS, ///< Catenary pylons RTSG_BRIDGE, ///< Bridge surface images RTSG_CROSSING, ///< Level crossing overlay images RTSG_DEPOT, ///< Depot images RTSG_FENCES, ///< Fence images RTSG_END, }; /** * Offsets for sprites within an overlay/underlay set. * These are the same for overlay and underlay sprites. */ enum RailTrackOffset { RTO_X, ///< Piece of rail in X direction RTO_Y, ///< Piece of rail in Y direction RTO_N, ///< Piece of rail in northern corner RTO_S, ///< Piece of rail in southern corner RTO_E, ///< Piece of rail in eastern corner RTO_W, ///< Piece of rail in western corner RTO_SLOPE_NE, ///< Piece of rail on slope with north-east raised RTO_SLOPE_SE, ///< Piece of rail on slope with south-east raised RTO_SLOPE_SW, ///< Piece of rail on slope with south-west raised RTO_SLOPE_NW, ///< Piece of rail on slope with north-west raised RTO_CROSSING_XY, ///< Crossing of X and Y rail, with ballast RTO_JUNCTION_SW, ///< Ballast for junction 'pointing' SW RTO_JUNCTION_NE, ///< Ballast for junction 'pointing' NE RTO_JUNCTION_SE, ///< Ballast for junction 'pointing' SE RTO_JUNCTION_NW, ///< Ballast for junction 'pointing' NW RTO_JUNCTION_NSEW,///< Ballast for full junction }; /** * Offsets for spries within a bridge surface overlay set. */ enum RailTrackBridgeOffset { RTBO_X, ///< Piece of rail in X direction RTBO_Y, ///< Piece of rail in Y direction RTBO_SLOPE, ///< Sloped rail pieces, in order NE, SE, SW, NW }; /** * Offsets from base sprite for fence sprites. These are in the order of * the sprites in the original data files. */ enum RailFenceOffset { RFO_FLAT_X, RFO_FLAT_Y, RFO_FLAT_VERT, RFO_FLAT_HORZ, RFO_SLOPE_SW, RFO_SLOPE_SE, RFO_SLOPE_NE, RFO_SLOPE_NW, }; /** * This struct contains all the info that is needed to draw and construct tracks. */ struct RailtypeInfo { /** * Struct containing the main sprites. @note not all sprites are listed, but only * the ones used directly in the code */ struct { SpriteID track_y; ///< single piece of rail in Y direction, with ground SpriteID track_ns; ///< two pieces of rail in North and South corner (East-West direction) SpriteID ground; ///< ground sprite for a 3-way switch SpriteID single_x; ///< single piece of rail in X direction, without ground SpriteID single_y; ///< single piece of rail in Y direction, without ground SpriteID single_n; ///< single piece of rail in the northern corner SpriteID single_s; ///< single piece of rail in the southern corner SpriteID single_e; ///< single piece of rail in the eastern corner SpriteID single_w; ///< single piece of rail in the western corner SpriteID single_sloped;///< single piecs of rail for slopes SpriteID crossing; ///< level crossing, rail in X direction SpriteID tunnel; ///< tunnel sprites base } base_sprites; /** * struct containing the sprites for the rail GUI. @note only sprites referred to * directly in the code are listed */ struct { SpriteID build_ns_rail; ///< button for building single rail in N-S direction SpriteID build_x_rail; ///< button for building single rail in X direction SpriteID build_ew_rail; ///< button for building single rail in E-W direction SpriteID build_y_rail; ///< button for building single rail in Y direction SpriteID auto_rail; ///< button for the autorail construction SpriteID build_depot; ///< button for building depots SpriteID build_tunnel; ///< button for building a tunnel SpriteID convert_rail; ///< button for converting rail } gui_sprites; struct { CursorID rail_ns; ///< Cursor for building rail in N-S direction CursorID rail_swne; ///< Cursor for building rail in X direction CursorID rail_ew; ///< Cursor for building rail in E-W direction CursorID rail_nwse; ///< Cursor for building rail in Y direction CursorID autorail; ///< Cursor for autorail tool CursorID depot; ///< Cursor for building a depot CursorID tunnel; ///< Cursor for building a tunnel CursorID convert; ///< Cursor for converting track } cursor; struct { StringID name; StringID toolbar_caption; StringID menu_text; StringID build_caption; StringID replace_text; StringID new_loco; } strings; /** sprite number difference between a piece of track on a snowy ground and the corresponding one on normal ground */ SpriteID snow_offset; /** bitmask to the OTHER railtypes on which an engine of THIS railtype generates power */ RailTypes powered_railtypes; /** bitmask to the OTHER railtypes on which an engine of THIS railtype can physically travel */ RailTypes compatible_railtypes; /** * Bridge offset */ SpriteID bridge_offset; /** * Original railtype number to use when drawing non-newgrf railtypes, or when drawing stations. */ byte fallback_railtype; /** * Multiplier for curve maximum speed advantage */ byte curve_speed; /** * Bit mask of rail type flags */ RailTypeFlags flags; /** * Cost multiplier for building this rail type */ uint16 cost_multiplier; /** * Cost multiplier for maintenance of this rail type */ uint16 maintenance_multiplier; /** * Acceleration type of this rail type */ uint8 acceleration_type; /** * Maximum speed for vehicles travelling on this rail type */ uint16 max_speed; /** * Unique 32 bit rail type identifier */ RailTypeLabel label; /** * Colour on mini-map */ byte map_colour; /** * Introduction date. * When #INVALID_DATE or a vehicle using this railtype gets introduced earlier, * the vehicle's introduction date will be used instead for this railtype. * The introduction at this date is furthermore limited by the * #introduction_required_types. */ Date introduction_date; /** * Bitmask of railtypes that are required for this railtype to be introduced * at a given #introduction_date. */ RailTypes introduction_required_railtypes; /** * Bitmask of which other railtypes are introduced when this railtype is introduced. */ RailTypes introduces_railtypes; /** * The sorting order of this railtype for the toolbar dropdown. */ byte sorting_order; /** * NewGRF providing the Action3 for the railtype. NULL if not available. */ const GRFFile *grffile[RTSG_END]; /** * Sprite groups for resolving sprites */ const SpriteGroup *group[RTSG_END]; inline bool UsesOverlay() const { return this->group[RTSG_GROUND] != NULL; } /** * Offset between the current railtype and normal rail. This means that:<p> * 1) All the sprites in a railset MUST be in the same order. This order * is determined by normal rail. Check sprites 1005 and following for this order<p> * 2) The position where the railtype is loaded must always be the same, otherwise * the offset will fail. */ inline uint GetRailtypeSpriteOffset() const { return 82 * this->fallback_railtype; } }; /** * Returns a pointer to the Railtype information for a given railtype * @param railtype the rail type which the information is requested for * @return The pointer to the RailtypeInfo */ static inline const RailtypeInfo *GetRailTypeInfo(RailType railtype) { extern RailtypeInfo _railtypes[RAILTYPE_END]; assert(railtype < RAILTYPE_END); return &_railtypes[railtype]; } /** * Checks if an engine of the given RailType can drive on a tile with a given * RailType. This would normally just be an equality check, but for electric * rails (which also support non-electric engines). * @return Whether the engine can drive on this tile. * @param enginetype The RailType of the engine we are considering. * @param tiletype The RailType of the tile we are considering. */ static inline bool IsCompatibleRail(RailType enginetype, RailType tiletype) { return HasBit(GetRailTypeInfo(enginetype)->compatible_railtypes, tiletype); } /** * Checks if an engine of the given RailType got power on a tile with a given * RailType. This would normally just be an equality check, but for electric * rails (which also support non-electric engines). * @return Whether the engine got power on this tile. * @param enginetype The RailType of the engine we are considering. * @param tiletype The RailType of the tile we are considering. */ static inline bool HasPowerOnRail(RailType enginetype, RailType tiletype) { return HasBit(GetRailTypeInfo(enginetype)->powered_railtypes, tiletype); } /** * Test if a RailType disallows build of level crossings. * @param rt The RailType to check. * @return Whether level crossings are not allowed. */ static inline bool RailNoLevelCrossings(RailType rt) { return HasBit(GetRailTypeInfo(rt)->flags, RTF_NO_LEVEL_CROSSING); } /** * Returns the cost of building the specified railtype. * @param railtype The railtype being built. * @return The cost multiplier. */ static inline Money RailBuildCost(RailType railtype) { assert(railtype < RAILTYPE_END); return (_price[PR_BUILD_RAIL] * GetRailTypeInfo(railtype)->cost_multiplier) >> 3; } /** * Returns the 'cost' of clearing the specified railtype. * @param railtype The railtype being removed. * @return The cost. */ static inline Money RailClearCost(RailType railtype) { /* Clearing rail in fact earns money, but if the build cost is set * very low then a loophole exists where money can be made. * In this case we limit the removal earnings to 3/4s of the build * cost. */ assert(railtype < RAILTYPE_END); return max(_price[PR_CLEAR_RAIL], -RailBuildCost(railtype) * 3 / 4); } /** * Calculates the cost of rail conversion * @param from The railtype we are converting from * @param to The railtype we are converting to * @return Cost per TrackBit */ static inline Money RailConvertCost(RailType from, RailType to) { /* Get the costs for removing and building anew * A conversion can never be more costly */ Money rebuildcost = RailBuildCost(to) + RailClearCost(from); /* Conversion between somewhat compatible railtypes: * Pay 1/8 of the target rail cost (labour costs) and additionally any difference in the * build costs, if the target type is more expensive (material upgrade costs). * Upgrade can never be more expensive than re-building. */ if (HasPowerOnRail(from, to) || HasPowerOnRail(to, from)) { Money upgradecost = RailBuildCost(to) / 8 + max((Money)0, RailBuildCost(to) - RailBuildCost(from)); return min(upgradecost, rebuildcost); } /* make the price the same as remove + build new type for rail types * which are not compatible in any way */ return rebuildcost; } /** * Calculates the maintenance cost of a number of track bits. * @param railtype The railtype to get the cost of. * @param num Number of track bits. * @return Total cost. */ static inline Money RailMaintenanceCost(RailType railtype, uint32 num) { assert(railtype < RAILTYPE_END); return (_price[PR_INFRASTRUCTURE_RAIL] * GetRailTypeInfo(railtype)->maintenance_multiplier * num * (1 + IntSqrt(num))) >> 11; // 4 bits fraction for the multiplier and 7 bits scaling. } /** * Calculates the maintenance cost of a number of signals. * @param num Number of signals. * @return Total cost. */ static inline Money SignalMaintenanceCost(uint32 num) { return (_price[PR_INFRASTRUCTURE_RAIL] * 15 * num * (1 + IntSqrt(num))) >> 8; // 1 bit fraction for the multiplier and 7 bits scaling. } void DrawTrainDepotSprite(int x, int y, int image, RailType railtype); int TicksToLeaveDepot(const Train *v); Foundation GetRailFoundation(Slope tileh, TrackBits bits); bool HasRailtypeAvail(const CompanyID company, const RailType railtype); bool ValParamRailtype(const RailType rail); RailTypes AddDateIntroducedRailTypes(RailTypes current, Date date); RailType GetBestRailtype(const CompanyID company); RailTypes GetCompanyRailtypes(const CompanyID c); RailType GetRailTypeByLabel(RailTypeLabel label); void ResetRailTypes(); void InitRailTypes(); RailType AllocateRailType(RailTypeLabel label); #endif /* RAIL_H */