OpenTTD README Last updated: 2010-01-21 Release version: 1.0.0-beta3 ------------------------------------------------------------------------ Table of Contents: ------------------ 1.0) About 2.0) Contacting * 2.1 Reporting Bugs 3.0) Supported Platforms 4.0) Installing and running OpenTTD * 4.1 (Required) 3rd party files * 4.2 OpenTTD directories * 4.3 Portable Installations (External Media) 5.0) OpenTTD features 6.0) Configuration File 7.0) Compiling * 7.1) Required/optional libraries 8.0) Translating * 8.1 Translation * 8.2 Previewing 9.0) Troubleshooting X.X) Credits 1.0) About: ---- ------ OpenTTD is a clone of Transport Tycoon Deluxe, a popular game originally written by Chris Sawyer. It attempts to mimic the original game as closely as possible while extending it with new features. OpenTTD is licensed under the GNU General Public License version 2.0. For more information, see the file 'COPYING'. 2.0) Contacting: ---- ---------- The easiest way to contact the OpenTTD team is by submitting bug reports or posting comments in our forums. You can also chat with us on IRC (#openttd on irc.oftc.net). The OpenTTD homepage is http://www.openttd.org/. You can also find the OpenTTD forums at http://forum.openttd.org/ 2.1) Reporting Bugs: ---- --------------- First of all, check whether the bug is not already known. Do this by looking through the file called 'known-bugs.txt' which is distributed with OpenTTD like this readme. For tracking our bugs we are using a bug tracker called Flyspray. You can find the tracker at http://bugs.openttd.org/. Before actually reporting take a look through the already reported bugs there to see if the bug is already known. The 'known-bugs.txt' file might be a bit outdated at the moment you are reading it as only bugs known before the release are documented there. Also look through the recently closed bugs. When you are sure it is not already reported you should: * Make sure you are running a recent version, i.e. run the latest stable or nightly based on where you found the bug. * Make sure you are not running a non-official binary, like a patch pack. When you are playing with a patch pack you should report any bugs to the forum thread related to that patch pack. * Make it reproducible for the developers. In other words, create a savegame in which you can reproduce the issue once loaded. It is very useful to give us the crash.dmp, crash.sav, crash.log and crash screenshot which are created on crashes. * Check whether the bug is already reported on our bug tracker. This includes searching for recently closed bug reports as the bug might already be fixed. After you have done all that you can report the bug. Please include the following information in your bug report: * OpenTTD version (PLEASE test the latest SVN/nightly build) * Bug details, including instructions how to reproduce it * Platform (Win32, Linux, FreeBSD, ...) and compiler (including version) if you compiled OpenTTD yourself. * Attach a saved game *and* a screenshot if possible * If this bug only occurred recently please note the last version without the bug and the first version including the bug. That way we can fix it quicker by looking at the changes made. * Attach crash.dmp, crash.log and crash.sav. These files are usually created next to your openttd.cfg. The crash handler will tell you the location. 2.2) Reporting Desyncs: ---- ------------------ As desyncs are hard to make reproducible OpenTTD has the ability to log all actions done by clients so we can replay the whole game in an effort to make desyncs better reproducible. You need to turn this ability on. When turned on an automatic savegame will be made once the map has been constructed in the 'save/autosave' directory, see OpenTTD directories to know where to find this directory. Furthermore the log file 'commands-out.log' will be created and all actions will be written to there. To enable the desync debugging you need to set the debug level for 'desync' to at least 1. You do this by starting OpenTTD with '-d desync=' as parameter or by typing 'debug_level desync=' in OpenTTD's internal console. The desync debug levels are: 0: nothing. 1: dumping of commands to 'commands-out.log'. 2: same as 1 plus checking vehicle caches and dumping that too. 3: same as 2 plus monthly saves in autosave. 4 and higher: same as 3 Restarting OpenTTD will overwrite 'commands-out.log'. OpenTTD will not remove the savegames (dmp_cmds_*.sav) made by the desync debugging system, so you have to occasionally remove them yourself! The naming format of the desync savegames is as follows: dmp_cmds_XXXXXXXX_YYYYYYYY.sav. The XXXXXXXX is the hexadecimal representation of the generation seed of the game and YYYYYYYY is the hexadecimal representation of the date of the game. This sorts the savegames by game and then by date making it easier to find the right savegames. When a desync has occurred with the desync debugging turned on you should file a bug report with the following files attached: - commands-out.log as it contains all the commands that were done - the last saved savegame (search for the last line beginning with 'save: dmp_cmds_' in commands-out.log). We use this savegame to check whether we can quickly reproduce the desync. Otherwise we will need... - the first saved savegame (search for the first line beginning with 'save' where the first part, up to the last underscore '_', is the same). We need this savegame to be able to reproduce the bug when the last savegame is not old enough. If you loaded a scenario or savegame you need to attach that. - optionally you can attach the savegames from around 50%, 75%, 85%, 90% and 95% of the game's progression. We can use these savegames to speed up the reproduction of the desync, but we should be able to reproduce these savegames based on the first savegame and commands-out.log. - in case you use any NewGRFs you should attach the ones you used unless we can easily find them ourselves via e.g. grfcrawler or when they are in the OpenTTDCoop pack. Do NOT remove the dmp_cmds savegames of a desync you have reported until the desync has been fixed; if you, by accident, send us the wrong savegames we will not be able to reproduce the desync and thus will be unable to fix it. 3.0) Supported Platforms: ---- -------------------- OpenTTD has been ported to several platforms and operating systems. It shouldn't be very difficult to port it to a new platform. The currently working platforms are: BeOS - SDL or Allegro DOS - Allegro FreeBSD - SDL Linux - SDL or Allegro MacOS X (universal) - Cocoa video and sound drivers MorphOS - SDL OpenBSD - SDL OS/2 - SDL Windows - Win32 GDI (faster) or SDL or Allegro 4.0) Installing and running OpenTTD: ---- ------------------------------- Installing OpenTTD is fairly straightforward. Either you have downloaded an archive which you have to extract to a directory where you want OpenTTD to be installed, or you have downloaded an installer, which will automatically extract OpenTTD in the given directory. OpenTTD looks in multiple locations to find the required data files (described in section 4.2). Installing any 3rd party files into a "shared" location has the advantage that you only need to do this step once, rather than copying the data files into all OpenTTD versions you have. Savegames, screenshots, etc are saved relative to the config file (openttd.cfg) currently being used. This means that if you use a config file in one of the shared directories, savegames will reside in the save/ directory next to the openttd.cfg file there. If you want savegames and screenshots in the directory where the OpenTTD binary resides, simply have your config file in that location. But if you remove this config file, savegames will still be in this directory (see notes in section 4.2) OpenTTD comes without AIs, so if you want to play with AIs you have to download them. The easiest way is via the "Check Online Content" button in the main menu. You can select some AIs that you think are compatible with your playing style. Another way is manually downloading the AIs from the forum although then you need to make sure that you install all the required AI libraries too; they get automatically selected (and downloaded) if you get the AIs via the "Check Online Content". If you do not have an AI but have configured OpenTTD to start an AI a message will be shown that the 'dummy' AI has been started. 4.1) (Required) 3rd party files: ---- --------------------------- Before you run OpenTTD, you need to put the game's data files into a data/ directory which can be located in various places addressed in the following section. For OpenTTD you need to acquire some third party data files. For this you have the choice of using the original Transport Tycoon Deluxe data files or a set of free data files. Do NOT copy files included with OpenTTD into "shared" directories (explained in the following sections) as sooner or later you will run into graphical glitches when using other versions of the game. 4.1.1) Free graphics and sound files ------ ----------------------------- The free data files, split into OpenGFX for graphics and OpenSFX for sounds can be found at: - http://bundles.openttdcoop.org/opengfx/releases/ for OpenGFX - http://bundles.openttdcoop.org/opensfx/releases/ for OpenSFX Please follow the readme of these packages about the installation procedure. The Windows installer can optionally download and install these packages. 4.1.2) Original Transport Tycoon Deluxe graphics and sound files ------ --------------------------------------------------------- If you want to play with the original Transport Tycoon Deluxe data files you have to copy the data files from the CD-ROM into the data/ directory. It does not matter whether you copy them from the DOS or Windows version of Transport Tycoon Deluxe. The Windows install can optionally copy these files. You need to copy the following files: - sample.cat - trg1r.grf or TRG1.GRF - trgcr.grf or TRGC.GRF - trghr.grf or TRGH.GRF - trgir.grf or TRGI.GRF - trgtr.grf or TRGT.GRF 4.1.3) Original Transport Tycoon Deluxe music ------ -------------------------------------- If you want the TTD music, copy the gm/ folder from the Windows version of TTD to your OpenTTD folder (not your data folder - also explained in the following sections). The music from the DOS version does not work. 4.1.4) AIs ------ --- If you want AIs use the in-game content downloader. If for some reason that is not possible or you want to use an AI that has not been uploaded to the content download system download the tar file and place it in the ai/ directory. If the AI needs libraries you'll have to download those too and put them in the ai/library/ directory. All AIs and AI Libraries that have been uploaded to the content download system can be found at http://noai.openttd.org/downloads/ The AIs and libraries can be found their in the form of .tar.gz packages. OpenTTD can read inside tar files but it does not extract .tar.gz files by itself. To figure out which libraries you need for an AI you have to start the AI and wait for an error message to pop up. The error message will tell you "couldn't find library 'lib-name'". Download that library and try again. 4.2) OpenTTD directories ---- ------------------------------- The TTD artwork files listed in the section 4.1 "(Required) 3rd party files" can be placed in a few different locations: 1. The current working directory (from where you started OpenTTD) 2. Your personal directory Windows: C:\My Documents (95, 98, ME) C:\Documents and Settings\\My Documents\OpenTTD (2000, XP) C:\Users\\Documents\OpenTTD (Vista, 7) Mac OSX: ~/Documents/OpenTTD Linux: ~/.openttd 3. The shared directory Windows: C:\Documents and Settings\All Users\Shared Documents\OpenTTD (2000, XP) C:\Users\Public\Documents\OpenTTD (Vista, 7) Mac OSX: /Library/Application Support/OpenTTD Linux: not available 4. The binary directory (where the OpenTTD executable is) Windows: C:\Program Files\OpenTTD Linux: /usr/games 5. The installation directory (Linux only) Linux: /usr/share/games/openttd 6. The application bundle (Mac OSX only) It includes the OpenTTD files (grf+lng) and it will work as long as they aren't touched Notes: - Linux in the previous list means .deb, but most paths should be similar for others. - The previous search order is also used for NewGRFs and openttd.cfg. - If openttd.cfg is not found, then it will be created using the 2, 4, 1, 3, 5 order. - Savegames will be relative to the config file only if there is no save/ directory in paths with higher priority than the config file path, but autosaves and screenshots will always be relative to the config file. The preferred setup: Place 3rd party files in shared directory (or in personal directory if you don't have write access on shared directory) and have your openttd.cfg config file in personal directory (where the game will then also place savegames and screenshots). 4.3) Portable Installations (External Media): ---- ---------------------------------------- You can install OpenTTD on external media so you can take it with you, i.e. using a USB key, or a USB HDD, etc. Create a directory where you shall store the game in (i.e. OpenTTD/). Copy the binary (OpenTTD.exe, OpenTTD.app, openttd, etc), data/ and your openttd.cfg to this directory. You can copy binaries for any operating system into this directory, which will allow you to play the game on nearly any computer you can attach the external media to. As always - additional grf files are stored in the data/ dir (for details, again, see section 4.1). 5.0) OpenTTD features: ---- ----------------- OpenTTD has a lot of features going beyond the original TTD emulation. Unfortunately, there is currently no comprehensive list of features, but there is a basic features list on the web, and some optional features can be controlled through the Advanced Settings dialog. We also implement some features known from TTDPatch (http://www.ttdpatch.net/). Several important non-standard controls: * Ctrl makes many commands more powerful. For example Ctrl clicking on signals with the build signal tool changes their behaviour. * Ingame console. More information at http://wiki.openttd.org/index.php/Console * Right clicking shows tooltips 5.1) Logging of potentially dangerous actions: ---- ---------------------------------------- OpenTTD is a complex program, and together with NewGRF, it may show a buggy behaviour. But not only bugs in code can cause problems. There are several ways to affect game state possibly resulting in program crash or multiplayer desyncs. Easier way would be to forbid all these unsafe actions, but that would affect game usability for many players. We certainly do not want that. However, we receive bug reports because of this. To reduce time spent with solving these problems, these potentially unsafe actions are logged in the savegame (including crash.sav). Log is stored in crash logs, too. Information logged: * Adding / removing / changing order of NewGRFs * Changing NewGRF parameters, loading compatible NewGRF * Changing game mode (scenario editor <-> normal game) * Loading game saved in a different OpenTTD / TTDPatch / TTD version * Running a modified OpenTTD build * Changing settings affecting NewGRF behaviour (non-network-safe settings) * Changing landscape (by cheat) * Triggering NewGRF bugs No personal information is stored. You can show the game log by typing 'gamelog' in the console or by running OpenTTD in debug mode. 6.0) Configuration File: ---- ------------------- The configuration file for OpenTTD (openttd.cfg) is in a simple Windows-like .INI format. It's mostly undocumented. Almost all settings can be changed ingame by using the 'Advanced Settings' window. When you can not find openttd.cfg you should look in the directories as described in section 4.2. If you do not have an openttd.cfg OpenTTD will create one after closing. 7.0) Compiling: ---- ---------- Windows: You need Microsoft Visual Studio .NET. Open the project file and it should build automatically. In case you want to build with SDL support you need to add WITH_SDL to the project settings. PNG (WITH_PNG) and ZLIB (WITH_ZLIB) support is enabled by default. For these to work you need their development files. For best results, download the openttd-useful.zip file from http://www.openttd.org/download-openttd-useful Put the header files into your compiler's include/ directory and the library (.lib) files into the lib/ directory. For more help with VS see docs/Readme_Windows_MSVC.txt. You can also build it using the Makefile with MSYS/MinGW or Cygwin/MinGW. Please read the Makefile for more information. Solaris, FreeBSD, OpenBSD: Use "gmake", but do a "./configure" before the first build. Linux/Unix: OpenTTD can be built with GNU "make". On non-GNU systems it's called "gmake". However, for the first build one has to do a "./configure" first. MacOS X: Use "make" or Xcode (which will then call make for you) This will give you a binary for your CPU type (PPC/Intel) However, for the first build one has to do a "./configure" first. To make a universal binary type "./configure --enabled-universal" instead of "./configure". BeOS: Use "make", but do a "./configure" before the first build. MorphOS: Use "make". However, for the first build one has to do a "./configure" first. Note that you need the MorphOS SDK, latest libnix updates (else C++ parts of OpenTTD will not build) and the powersdl.library SDK. Optionally libz, libpng and freetype2 developer files. OS/2: A comprehensive GNU build environment is required to build the OS/2 version. See the docs/Readme_OS2.txt file for more information. DOS: A build environment with DJGPP is needed as well as libraries such as Allegro, zlib and libpng, which all can be downloaded from the DJGPP website. Compilation is straight forward: use make, but do a "./configure" before the first build. The build binary will need cwsdpmi.exe to be in the same directory as the openttd executable. cwsdpmi.exe can be found in the os/dos subdirectory. If you compile with stripping turned on a binary will be generated that does not need cwsdpmi.exe by adding the cswdstub.exe to the created OpenTTD binary. 7.1) Required/optional libraries: ---- ------------------- The following libraries are used by OpenTTD for: - libSDL/liballegro: hardware access (video, sound, mouse) - zlib: (de)compressing of savegames - liblzo2: (de)compressing of old (pre 0.3.0) savegames - libpng: making screenshots and loading heightmaps - libfreetype: loading generic fonts and rendering them - libfontconfig: searching for fonts, resolving font names to actual fonts - libicu: handling of right-to-left scripts (e.g. Arabic and Persian) OpenTTD does not require any of the libraries to be present, but without zlib you cannot open most savegames or use the content downloading system. Without libSDL/liballegro on non-Windows and non-MacOS X machines you have no graphical user interface; you would be building a dedicated server. 8.0) Translating: ---- ------------------- See http://www.openttd.org/development for up-to-date information. The use of the online Translator service, located at http://translator.openttd.org/, is highly encouraged. For getting an account simply follow the guidelines in the FAQ of the translator website. If for some reason the website is down for a longer period of time, the information below might be of help. Please contact the translations manager (http://www.openttd.org/contact) before beginning the translation process! This avoids double work, as someone else may have already started translating to the same language. 8.1) Translation: ---- ------------------- So, now that you've notified the development team about your intention to translate (You did, right? Of course you did.) you can pick up english.txt (found in the SVN repository under /src/lang) and translate. You must change the first two lines of the file appropriately: ##name English-Name-Of-Language ##ownname Native-Name-Of-Language Note: Do not alter the following parts of the file: * String identifiers (the first word on each line) * Parts of the strings which are in curly braces (such as {STRING}) * Lines beginning with ## (such as ##id), other than the first two lines of the file 8.2) Previewing: ---- ------------------- In order to view the translation in the game, you need to compile your language file with the strgen utility. You can download the precompiled strgen from: http://www.openttd.org/download-strgen To compile it yourself just take the normal OpenTTD sources and build that. During the build process the strgen utility will be made. strgen is a command-line utility. It takes the language filename as parameter. Example: strgen lang/german.txt This results in compiling german.txt and produces another file named german.lng. Any missing strings are replaced with the English strings. Note that it looks for english.txt in the lang subdirectory, which is where your language file should also be. That's all! You should now be able to select the language in the game options. 9.0) Troubleshooting ---- --------------- To see all startup options available to you, start OpenTTD with the "./openttd -h" option. This might help you tweak some of the settings. If the game is acting strange and you feel adventurous you can try the "-d [[]=[]" flag, where the higher levels will give you more debugging output. The "name" variable can help you to display only some type of debugging messages. This is mostly undocumented so best is to look in the source code file debug.c for the various debugging types. For more information look at http://wiki.openttd.org/index.php/Command_line. The most frequent problem is missing data files. Don't forget to put all GRF files from TTD into your data/ folder including sample.cat! Under Windows 98 and lower it is impossible to use a dedicated server; it will fail to start. Perhaps this is for the better because those OSes are not known for their stability. With the added support for font-based text selecting a non-latin language will result in garbage (lots of '?') shown on screen. Please open your configuration file and add a desired font for small/medium/-and large_font. This can be a font name like "Tahoma" or a path to a font. Any NewGRF file used in a game is stored inside the savegame and will refuse to load if you don't have that NewGRF file available. A list of missing files will be output to the console at the moment, so use the '-d' flag (on windows) to see this list. You just have to find the files (http://grfcrawler.tt-forums.net/) put them in the data/ folder and you're set to go. X.X) Credits: ---- -------- The OpenTTD team (in alphabetical order): Albert Hofkamp (Alberth) - GUI expert Jean-Francois Claeys (Belugas) - GUI, newindustries and more Matthijs Kooijman (blathijs) - Pathfinder-guru, pool rework Christoph Elsenhans (frosch) - General coding Loïc Guilloux (glx) - Windows Expert Michael Lutz (michi_cc) - Path based signals Owen Rudge (orudge) - Forum host, OS/2 port Peter Nelson (peter1138) - Spiritual descendant from newGRF gods Remko Bijker (Rubidium) - Lead coder and way more Zdeněk Sojka (SmatZ) - Bug finder and fixer José Soler (Terkhen) - General coding Thijs Marinussen (Yexo) - AI Framework Inactive Developers: Bjarni Corfitzen (Bjarni) - MacOSX port, coder and vehicles Victor Fischer (Celestar) - Programming everywhere you need him to Tamás Faragó (Darkvater) - Ex-Lead coder Jaroslav Mazanec (KUDr) - YAPG (Yet Another Pathfinder God) ;) Jonathan Coome (Maedhros) - High priest of the NewGRF Temple Attila Bán (MiHaMiX) - WebTranslator 1 and 2 Christoph Mallon (Tron) - Programmer, code correctness police Retired Developers: Ludvig Strigeus (ludde) - OpenTTD author, main coder (0.1 - 0.3.3) Serge Paquet (vurlix) - Assistant project manager, coder (0.1 - 0.3.3) Dominik Scherer (dominik81) - Lead programmer, GUI expert (0.3.0 - 0.3.6) Benedikt Brüggemeier (skidd13) - Bug fixer and code reworker Patric Stout (TrueLight) - Programmer (0.3 - pre0.7), sys op (active) Thanks to: Josef Drexler - For his great work on TTDPatch. Marcin Grzegorczyk - For his TTDPatch work and documentation of TTD internals and graphics (signals and track foundations) Petr Baudiš (pasky) - Many patches, newgrf support, etc. Simon Sasburg (HackyKid) - For the many bugfixes he has blessed us with Stefan Meißner (sign_de) - For his work on the console Mike Ragsdale - OpenTTD installer Cian Duffy (MYOB) - BeOS port / manual writing Christian Rosentreter (tokai) - MorphOS / AmigaOS port Richard Kempton (RichK67) - Additional airports, initial TGP implementation Alberto Demichelis - Squirrel scripting language L. Peter Deutsch - MD5 implementation Michael Blunck - For revolutionizing TTD with awesome graphics George - Canal graphics David Dallaston (Pikka) - Tram tracks All Translators - For their support to make OpenTTD a truly international game Bug Reporters - Thanks for all bug reports Chris Sawyer - For an amazing game!