From c4ccf1a28d415a9035718d3126241cc459f63c79 Mon Sep 17 00:00:00 2001 From: peter1138 Date: Sun, 25 Jan 2009 19:27:13 +0000 Subject: (svn r15271) -Codechange: Use offsets for drawing elrail wires & pylons instead of absolute sprite IDs. --- src/table/elrail_data.h | 148 ++++++++++++++++++++++++++++++++---------------- src/table/sprites.h | 59 ++----------------- 2 files changed, 106 insertions(+), 101 deletions(-) (limited to 'src/table') diff --git a/src/table/elrail_data.h b/src/table/elrail_data.h index f9682aca5..7283c1086 100644 --- a/src/table/elrail_data.h +++ b/src/table/elrail_data.h @@ -235,20 +235,72 @@ static const int8 y_pcp_offsets[DIAGDIR_END] = {8, 16, 8, 0}; /* Geometric placement of the PPP relative to the PCP*/ static const int8 x_ppp_offsets[DIR_END] = {-2, -4, -2, 0, 2, 4, 2, 0}; static const int8 y_ppp_offsets[DIR_END] = {-2, 0, 2, 4, 2, 0, -2, -4}; + +/** + * Offset for pylon sprites from the base pylon sprite. + */ +enum PylonSpriteOffset { + PSO_Y_NE, + PSO_Y_SW, + PSO_X_NW, + PSO_X_SE, + PSO_EW_N, + PSO_EW_S, + PSO_NS_W, + PSO_NS_E, +}; + /* The type of pylon to draw at each PPP */ -static const SpriteID pylon_sprites[] = { - SPR_PYLON_EW_N, - SPR_PYLON_Y_NE, - SPR_PYLON_NS_E, - SPR_PYLON_X_SE, - SPR_PYLON_EW_S, - SPR_PYLON_Y_SW, - SPR_PYLON_NS_W, - SPR_PYLON_X_NW +static const uint8 pylon_sprites[] = { + PSO_EW_N, + PSO_Y_NE, + PSO_NS_E, + PSO_X_SE, + PSO_EW_S, + PSO_Y_SW, + PSO_NS_W, + PSO_X_NW, +}; + +/** + * Offset for wire sprites from the base wire sprite. + */ +enum WireSpriteOffset { + WSO_X_SHORT, + WSO_Y_SHORT, + WSO_EW_SHORT, + WSO_NS_SHORT, + WSO_X_SHORT_DOWN, + WSO_Y_SHORT_UP, + WSO_X_SHORT_UP, + WSO_Y_SHORT_DOWN, + + WSO_X_SW, + WSO_Y_SE, + WSO_EW_E, + WSO_NS_S, + WSO_X_SW_DOWN, + WSO_Y_SE_UP, + WSO_X_SW_UP, + WSO_Y_SE_DOWN, + + WSO_X_NE, + WSO_Y_NW, + WSO_EW_W, + WSO_NS_N, + WSO_X_NE_DOWN, + WSO_Y_NW_UP, + WSO_X_NE_UP, + WSO_Y_NW_DOWN, + + WSO_ENTRANCE_NE, + WSO_ENTRANCE_SE, + WSO_ENTRANCE_SW, + WSO_ENTRANCE_NW, }; struct SortableSpriteStruct { - SpriteID image; + uint8 image_offset; int8 x_offset; int8 y_offset; int8 x_size; @@ -268,75 +320,75 @@ static const SortableSpriteStruct CatenarySpriteData[] = { /* X direction */ /* Flat tiles: */ /* Wires */ - { SPR_WIRE_X_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 0: Wire in X direction, pylon on the SW end only - { SPR_WIRE_X_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 1: Wire in X direction, pylon on the NE end - { SPR_WIRE_X_SHORT, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 2: Wire in X direction, pylon on both ends + { WSO_X_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 0: Wire in X direction, pylon on the SW end only + { WSO_X_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 1: Wire in X direction, pylon on the NE end + { WSO_X_SHORT, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 2: Wire in X direction, pylon on both ends /* "up" tiles */ /* Wires */ - { SPR_WIRE_X_SW_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 3: Wire in X pitch up, pylon on the SW end only - { SPR_WIRE_X_NE_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 4: Wire in X pitch up, pylon on the NE end - { SPR_WIRE_X_SHORT_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 5: Wire in X pitch up, pylon on both ends + { WSO_X_SW_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 3: Wire in X pitch up, pylon on the SW end only + { WSO_X_NE_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 4: Wire in X pitch up, pylon on the NE end + { WSO_X_SHORT_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 5: Wire in X pitch up, pylon on both ends /* "down" tiles */ /* Wires */ - { SPR_WIRE_X_SW_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 6: Wire in X pitch down, pylon on the SW end - { SPR_WIRE_X_NE_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 7: Wire in X pitch down, pylon on the NE end - { SPR_WIRE_X_SHORT_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 8: Wire in X pitch down, pylon on both ends + { WSO_X_SW_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 6: Wire in X pitch down, pylon on the SW end + { WSO_X_NE_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 7: Wire in X pitch down, pylon on the NE end + { WSO_X_SHORT_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 8: Wire in X pitch down, pylon on both ends /* Y direction */ /* Flat tiles: */ /* Wires */ - { SPR_WIRE_Y_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! 9: Wire in Y direction, pylon on the SE end only - { SPR_WIRE_Y_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //!10: Wire in Y direction, pylon on the NW end - { SPR_WIRE_Y_SHORT, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //!11: Wire in Y direction, pylon on both ends + { WSO_Y_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! 9: Wire in Y direction, pylon on the SE end only + { WSO_Y_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //!10: Wire in Y direction, pylon on the NW end + { WSO_Y_SHORT, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //!11: Wire in Y direction, pylon on both ends /* "up" tiles */ /* Wires */ - { SPR_WIRE_Y_SE_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!12: Wire in Y pitch up, pylon on the SE end only - { SPR_WIRE_Y_NW_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!13: Wire in Y pitch up, pylon on the NW end - { SPR_WIRE_Y_SHORT_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!14: Wire in Y pitch up, pylon on both ends + { WSO_Y_SE_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!12: Wire in Y pitch up, pylon on the SE end only + { WSO_Y_NW_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!13: Wire in Y pitch up, pylon on the NW end + { WSO_Y_SHORT_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!14: Wire in Y pitch up, pylon on both ends /* "down" tiles */ /* Wires */ - { SPR_WIRE_Y_SE_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!15: Wire in Y pitch down, pylon on the SE end - { SPR_WIRE_Y_NW_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!16: Wire in Y pitch down, pylon on the NW end - { SPR_WIRE_Y_SHORT_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!17: Wire in Y pitch down, pylon on both ends + { WSO_Y_SE_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!15: Wire in Y pitch down, pylon on the SE end + { WSO_Y_NW_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!16: Wire in Y pitch down, pylon on the NW end + { WSO_Y_SHORT_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!17: Wire in Y pitch down, pylon on both ends /* NS Direction */ - { SPR_WIRE_NS_SHORT, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!18: LEFT trackbit wire, pylon on both ends - { SPR_WIRE_NS_SHORT, 0, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!19: RIGHT trackbit wire, pylon on both ends + { WSO_NS_SHORT, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!18: LEFT trackbit wire, pylon on both ends + { WSO_NS_SHORT, 0, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!19: RIGHT trackbit wire, pylon on both ends - { SPR_WIRE_NS_N, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!20: LEFT trackbit wire, pylon on N end - { SPR_WIRE_NS_N, 0, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!21: RIGHT trackbit wire, pylon on N end + { WSO_NS_N, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!20: LEFT trackbit wire, pylon on N end + { WSO_NS_N, 0, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!21: RIGHT trackbit wire, pylon on N end - { SPR_WIRE_NS_S, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!22: LEFT trackbit wire, pylon on S end - { SPR_WIRE_NS_S, 0, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!23: RIGHT trackbit wire, pylon on S end + { WSO_NS_S, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!22: LEFT trackbit wire, pylon on S end + { WSO_NS_S, 0, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!23: RIGHT trackbit wire, pylon on S end /* EW Direction */ - { SPR_WIRE_EW_SHORT, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!24: UPPER trackbit wire, pylon on both ends - { SPR_WIRE_EW_SHORT, 15, 8, 3, 3, 1, ELRAIL_ELEVATION }, //!25: LOWER trackbit wire, pylon on both ends + { WSO_EW_SHORT, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!24: UPPER trackbit wire, pylon on both ends + { WSO_EW_SHORT, 15, 8, 3, 3, 1, ELRAIL_ELEVATION }, //!25: LOWER trackbit wire, pylon on both ends - { SPR_WIRE_EW_W, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!28: UPPER trackbit wire, pylon on both ends - { SPR_WIRE_EW_W, 15, 8, 3, 3, 1, ELRAIL_ELEVATION }, //!29: LOWER trackbit wire, pylon on both ends + { WSO_EW_W, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!28: UPPER trackbit wire, pylon on both ends + { WSO_EW_W, 15, 8, 3, 3, 1, ELRAIL_ELEVATION }, //!29: LOWER trackbit wire, pylon on both ends - { SPR_WIRE_EW_E, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!32: UPPER trackbit wire, pylon on both ends - { SPR_WIRE_EW_E, 15, 8, 3, 3, 1, ELRAIL_ELEVATION } //!33: LOWER trackbit wire, pylon on both ends + { WSO_EW_E, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!32: UPPER trackbit wire, pylon on both ends + { WSO_EW_E, 15, 8, 3, 3, 1, ELRAIL_ELEVATION } //!33: LOWER trackbit wire, pylon on both ends }; static const SortableSpriteStruct CatenarySpriteData_Depot[] = { - { SPR_WIRE_DEPOT_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE depot exit - { SPR_WIRE_DEPOT_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! Wire for SE depot exit - { SPR_WIRE_DEPOT_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW depot exit - { SPR_WIRE_DEPOT_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION } //! Wire for NW depot exit + { WSO_ENTRANCE_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE depot exit + { WSO_ENTRANCE_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! Wire for SE depot exit + { WSO_ENTRANCE_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW depot exit + { WSO_ENTRANCE_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION } //! Wire for NW depot exit }; static const SortableSpriteStruct CatenarySpriteData_Tunnel[] = { - { SPR_WIRE_TUNNEL_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE tunnel exit - { SPR_WIRE_TUNNEL_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! Wire for SE tunnel exit - { SPR_WIRE_TUNNEL_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW tunnel exit - { SPR_WIRE_TUNNEL_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION } //! Wire for NW tunnel exit + { WSO_ENTRANCE_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE tunnel exit + { WSO_ENTRANCE_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! Wire for SE tunnel exit + { WSO_ENTRANCE_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW tunnel exit + { WSO_ENTRANCE_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION } //! Wire for NW tunnel exit }; diff --git a/src/table/sprites.h b/src/table/sprites.h index 7d5d8184a..709e60d84 100644 --- a/src/table/sprites.h +++ b/src/table/sprites.h @@ -379,59 +379,12 @@ enum Sprites { SPR_TRACK_FENCE_SLOPE_NE = 1307, SPR_TRACK_FENCE_SLOPE_NW = 1308, - /* Elrail stuff */ - /* Wires. First identifier is the direction of the track, second is the required placement of the pylon. - * "short" denotes a wire that requires a pylon on each end. Third identifier is the direction of the slope - * (in positive coordinate direction) */ - SPR_WIRE_X_SHORT = SPR_ELRAIL_BASE + 0, - SPR_WIRE_Y_SHORT = SPR_ELRAIL_BASE + 1, - SPR_WIRE_EW_SHORT = SPR_ELRAIL_BASE + 2, - SPR_WIRE_NS_SHORT = SPR_ELRAIL_BASE + 3, - SPR_WIRE_X_SHORT_DOWN = SPR_ELRAIL_BASE + 4, - SPR_WIRE_Y_SHORT_UP = SPR_ELRAIL_BASE + 5, - SPR_WIRE_X_SHORT_UP = SPR_ELRAIL_BASE + 6, - SPR_WIRE_Y_SHORT_DOWN = SPR_ELRAIL_BASE + 7, - - SPR_WIRE_X_SW = SPR_ELRAIL_BASE + 8, - SPR_WIRE_Y_SE = SPR_ELRAIL_BASE + 9, - SPR_WIRE_EW_E = SPR_ELRAIL_BASE + 10, - SPR_WIRE_NS_S = SPR_ELRAIL_BASE + 11, - SPR_WIRE_X_SW_DOWN = SPR_ELRAIL_BASE + 12, - SPR_WIRE_Y_SE_UP = SPR_ELRAIL_BASE + 13, - SPR_WIRE_X_SW_UP = SPR_ELRAIL_BASE + 14, - SPR_WIRE_Y_SE_DOWN = SPR_ELRAIL_BASE + 15, - - SPR_WIRE_X_NE = SPR_ELRAIL_BASE + 16, - SPR_WIRE_Y_NW = SPR_ELRAIL_BASE + 17, - SPR_WIRE_EW_W = SPR_ELRAIL_BASE + 18, - SPR_WIRE_NS_N = SPR_ELRAIL_BASE + 19, - SPR_WIRE_X_NE_DOWN = SPR_ELRAIL_BASE + 20, - SPR_WIRE_Y_NW_UP = SPR_ELRAIL_BASE + 21, - SPR_WIRE_X_NE_UP = SPR_ELRAIL_BASE + 22, - SPR_WIRE_Y_NW_DOWN = SPR_ELRAIL_BASE + 23, - - /* Tunnel entries */ - SPR_WIRE_TUNNEL_NE = SPR_ELRAIL_BASE + 24, - SPR_WIRE_TUNNEL_SE = SPR_ELRAIL_BASE + 25, - SPR_WIRE_TUNNEL_SW = SPR_ELRAIL_BASE + 26, - SPR_WIRE_TUNNEL_NW = SPR_ELRAIL_BASE + 27, - - /* Depot entries */ - SPR_WIRE_DEPOT_SW = SPR_ELRAIL_BASE + 24, - SPR_WIRE_DEPOT_NW = SPR_ELRAIL_BASE + 25, - SPR_WIRE_DEPOT_NE = SPR_ELRAIL_BASE + 26, - SPR_WIRE_DEPOT_SE = SPR_ELRAIL_BASE + 27, - - - /* Pylons, first identifier is the direction of the track, second the placement relative to the track */ - SPR_PYLON_Y_NE = SPR_ELRAIL_BASE + 28, - SPR_PYLON_Y_SW = SPR_ELRAIL_BASE + 29, - SPR_PYLON_X_NW = SPR_ELRAIL_BASE + 30, - SPR_PYLON_X_SE = SPR_ELRAIL_BASE + 31, - SPR_PYLON_EW_N = SPR_ELRAIL_BASE + 32, - SPR_PYLON_EW_S = SPR_ELRAIL_BASE + 33, - SPR_PYLON_NS_W = SPR_ELRAIL_BASE + 34, - SPR_PYLON_NS_E = SPR_ELRAIL_BASE + 35, + /* Base sprites for elrail. + * Offsets via an enum are used so a complete list of absolute + * sprite numbers is unnecessary. + */ + SPR_WIRE_BASE = SPR_ELRAIL_BASE + 0, + SPR_PYLON_BASE = SPR_ELRAIL_BASE + 28, /* sprites for roads */ SPR_ROAD_PAVED_STRAIGHT_Y = 1313, -- cgit v1.2.3-54-g00ecf