From 8110b9f517e126f110a36ca06e14205ccaf308cc Mon Sep 17 00:00:00 2001 From: rubidium Date: Fri, 7 Sep 2007 21:11:12 +0000 Subject: (svn r11054) -Fix [FS#944]: mismatch between TTDP's and OTTD's placement of catenary, creating graphical glitches when loading a catenary replacement. Patch by frosch. --- src/table/elrail_data.h | 85 ++++++++++++++++++++++--------------------------- 1 file changed, 38 insertions(+), 47 deletions(-) (limited to 'src/table') diff --git a/src/table/elrail_data.h b/src/table/elrail_data.h index 3f43899e9..f929f6a9a 100644 --- a/src/table/elrail_data.h +++ b/src/table/elrail_data.h @@ -229,13 +229,13 @@ static const Direction PPPorder[DIAGDIR_END][TLG_END][DIR_END] = { /* X - } }; /* Geometric placement of the PCP relative to the tile origin */ -static const int8 x_pcp_offsets[DIAGDIR_END] = {0, 8, 15, 8}; -static const int8 y_pcp_offsets[DIAGDIR_END] = {8, 15, 8, 0}; +static const int8 x_pcp_offsets[DIAGDIR_END] = {0, 8, 16, 8}; +static const int8 y_pcp_offsets[DIAGDIR_END] = {8, 16, 8, 0}; /* Geometric placement of the PPP relative to the PCP*/ -static const int8 x_ppp_offsets[DIR_END] = {-3, -4, -3, 0, 3, 4, 3, 0}; -static const int8 y_ppp_offsets[DIR_END] = {-3, 0, 3, 4, 3, 0, -3, -4}; +static const int8 x_ppp_offsets[DIR_END] = {-2, -4, -2, 0, 2, 4, 2, 0}; +static const int8 y_ppp_offsets[DIR_END] = {-2, 0, 2, 4, 2, 0, -2, -4}; /* The type of pylon to draw at each PPP */ -static const SpriteID pylons_normal[] = { +static const SpriteID pylon_sprites[] = { SPR_PYLON_EW_N, SPR_PYLON_Y_NE, SPR_PYLON_NS_E, @@ -246,13 +246,6 @@ static const SpriteID pylons_normal[] = { SPR_PYLON_X_NW }; -static const SpriteID pylons_bridge[] = { - SPR_PYLON_X_NW, - SPR_PYLON_X_SE, - SPR_PYLON_Y_NE, - SPR_PYLON_Y_SW -}; - struct SortableSpriteStruct { SpriteID image; int8 x_offset; @@ -265,9 +258,7 @@ struct SortableSpriteStruct { enum { /** Distance between wire and rail */ - ELRAIL_ELEVATION = 8, - /** Corrects an off-by-one error in some places (tileh 12 and 9) (TODO -- find source of error) */ - ELRAIL_ELEV_CORR = ELRAIL_ELEVATION + 1, + ELRAIL_ELEVATION = 10, /** Wires that a draw one level higher than the north corner. */ ELRAIL_ELEVRAISE = ELRAIL_ELEVATION + TILE_HEIGHT }; @@ -276,41 +267,41 @@ static const SortableSpriteStruct CatenarySpriteData[] = { /* X direction */ /* Flat tiles: */ /* Wires */ - { SPR_WIRE_X_SW, 0, 8, 16, 1, 1, ELRAIL_ELEVATION }, //! 0: Wire in X direction, pylon on the SW end only - { SPR_WIRE_X_NE, 0, 8, 16, 1, 1, ELRAIL_ELEVATION }, //! 1: Wire in X direction, pylon on the NE end - { SPR_WIRE_X_SHORT, 0, 8, 16, 1, 1, ELRAIL_ELEVATION }, //! 2: Wire in X direction, pylon on both ends + { SPR_WIRE_X_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 0: Wire in X direction, pylon on the SW end only + { SPR_WIRE_X_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 1: Wire in X direction, pylon on the NE end + { SPR_WIRE_X_SHORT, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! 2: Wire in X direction, pylon on both ends /* "up" tiles */ /* Wires */ - { SPR_WIRE_X_SW_UP, 0, 8, 16, 8, 1, ELRAIL_ELEVRAISE }, //! 3: Wire in X pitch up, pylon on the SW end only - { SPR_WIRE_X_NE_UP, 0, 8, 16, 8, 1, ELRAIL_ELEVRAISE }, //! 4: Wire in X pitch up, pylon on the NE end - { SPR_WIRE_X_SHORT_UP, 0, 8, 16, 8, 1, ELRAIL_ELEVRAISE }, //! 5: Wire in X pitch up, pylon on both ends + { SPR_WIRE_X_SW_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 3: Wire in X pitch up, pylon on the SW end only + { SPR_WIRE_X_NE_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 4: Wire in X pitch up, pylon on the NE end + { SPR_WIRE_X_SHORT_UP, 0, 7, 15, 8, 1, ELRAIL_ELEVRAISE }, //! 5: Wire in X pitch up, pylon on both ends /* "down" tiles */ /* Wires */ - { SPR_WIRE_X_SW_DOWN, 0, 8, 16, 8, 1, ELRAIL_ELEV_CORR }, //! 6: Wire in X pitch down, pylon on the SW end - { SPR_WIRE_X_NE_DOWN, 0, 8, 16, 8, 1, ELRAIL_ELEV_CORR }, //! 7: Wire in X pitch down, pylon on the NE end - { SPR_WIRE_X_SHORT_DOWN, 0, 8, 16, 8, 1, ELRAIL_ELEV_CORR }, //! 8: Wire in X pitch down, pylon on both ends + { SPR_WIRE_X_SW_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 6: Wire in X pitch down, pylon on the SW end + { SPR_WIRE_X_NE_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 7: Wire in X pitch down, pylon on the NE end + { SPR_WIRE_X_SHORT_DOWN, 0, 7, 15, 8, 1, ELRAIL_ELEVATION }, //! 8: Wire in X pitch down, pylon on both ends /* Y direction */ /* Flat tiles: */ /* Wires */ - { SPR_WIRE_Y_SE, 8, 0, 1, 16, 1, ELRAIL_ELEVATION }, //! 9: Wire in Y direction, pylon on the SE end only - { SPR_WIRE_Y_NW, 8, 0, 1, 16, 1, ELRAIL_ELEVATION }, //!10: Wire in Y direction, pylon on the NW end - { SPR_WIRE_Y_SHORT, 8, 0, 1, 16, 1, ELRAIL_ELEVATION }, //!11: Wire in Y direction, pylon on both ends + { SPR_WIRE_Y_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! 9: Wire in Y direction, pylon on the SE end only + { SPR_WIRE_Y_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //!10: Wire in Y direction, pylon on the NW end + { SPR_WIRE_Y_SHORT, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //!11: Wire in Y direction, pylon on both ends /* "up" tiles */ /* Wires */ - { SPR_WIRE_Y_SE_UP, 8, 0, 8, 16, 1, ELRAIL_ELEVRAISE }, //!12: Wire in Y pitch up, pylon on the SE end only - { SPR_WIRE_Y_NW_UP, 8, 0, 8, 16, 1, ELRAIL_ELEVRAISE }, //!13: Wire in Y pitch up, pylon on the NW end - { SPR_WIRE_Y_SHORT_UP, 8, 0, 8, 16, 1, ELRAIL_ELEVRAISE }, //!14: Wire in Y pitch up, pylon on both ends + { SPR_WIRE_Y_SE_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!12: Wire in Y pitch up, pylon on the SE end only + { SPR_WIRE_Y_NW_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!13: Wire in Y pitch up, pylon on the NW end + { SPR_WIRE_Y_SHORT_UP, 7, 0, 8, 15, 1, ELRAIL_ELEVRAISE }, //!14: Wire in Y pitch up, pylon on both ends /* "down" tiles */ /* Wires */ - { SPR_WIRE_Y_SE_DOWN, 8, 0, 8, 16, 1, ELRAIL_ELEV_CORR }, //!15: Wire in Y pitch down, pylon on the SE end - { SPR_WIRE_Y_NW_DOWN, 8, 0, 8, 16, 1, ELRAIL_ELEV_CORR }, //!16: Wire in Y pitch down, pylon on the NW end - { SPR_WIRE_Y_SHORT_DOWN, 8, 0, 8, 16, 1, ELRAIL_ELEV_CORR }, //!17: Wire in Y pitch down, pylon on both ends + { SPR_WIRE_Y_SE_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!15: Wire in Y pitch down, pylon on the SE end + { SPR_WIRE_Y_NW_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!16: Wire in Y pitch down, pylon on the NW end + { SPR_WIRE_Y_SHORT_DOWN, 7, 0, 8, 15, 1, ELRAIL_ELEVATION }, //!17: Wire in Y pitch down, pylon on both ends /* NS Direction */ { SPR_WIRE_NS_SHORT, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!18: LEFT trackbit wire, pylon on both ends @@ -323,28 +314,28 @@ static const SortableSpriteStruct CatenarySpriteData[] = { { SPR_WIRE_NS_S, 0, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!23: RIGHT trackbit wire, pylon on S end /* EW Direction */ - { SPR_WIRE_EW_SHORT, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!24: UPPER trackbit wire, pylon on both ends - { SPR_WIRE_EW_SHORT, 16, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!25: LOWER trackbit wire, pylon on both ends + { SPR_WIRE_EW_SHORT, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!24: UPPER trackbit wire, pylon on both ends + { SPR_WIRE_EW_SHORT, 15, 8, 3, 3, 1, ELRAIL_ELEVATION }, //!25: LOWER trackbit wire, pylon on both ends - { SPR_WIRE_EW_W, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!28: UPPER trackbit wire, pylon on both ends - { SPR_WIRE_EW_W, 16, 8, 8, 8, 1, ELRAIL_ELEVATION }, //!29: LOWER trackbit wire, pylon on both ends + { SPR_WIRE_EW_W, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!28: UPPER trackbit wire, pylon on both ends + { SPR_WIRE_EW_W, 15, 8, 3, 3, 1, ELRAIL_ELEVATION }, //!29: LOWER trackbit wire, pylon on both ends - { SPR_WIRE_EW_E, 8, 0, 8, 8, 1, ELRAIL_ELEVATION }, //!32: UPPER trackbit wire, pylon on both ends - { SPR_WIRE_EW_E, 16, 8, 8, 8, 1, ELRAIL_ELEVATION } //!33: LOWER trackbit wire, pylon on both ends + { SPR_WIRE_EW_E, 7, 0, 1, 1, 1, ELRAIL_ELEVATION }, //!32: UPPER trackbit wire, pylon on both ends + { SPR_WIRE_EW_E, 15, 8, 3, 3, 1, ELRAIL_ELEVATION } //!33: LOWER trackbit wire, pylon on both ends }; static const SortableSpriteStruct CatenarySpriteData_Depot[] = { - { SPR_WIRE_DEPOT_NE, 0, 8, 8, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE depot exit - { SPR_WIRE_DEPOT_SE, 8, 0, 1, 8, 1, ELRAIL_ELEVATION }, //! Wire for SE depot exit - { SPR_WIRE_DEPOT_SW, 0, 8, 8, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW depot exit - { SPR_WIRE_DEPOT_NW, 8, 0, 1, 8, 1, ELRAIL_ELEVATION } //! Wire for NW depot exit + { SPR_WIRE_DEPOT_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE depot exit + { SPR_WIRE_DEPOT_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! Wire for SE depot exit + { SPR_WIRE_DEPOT_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW depot exit + { SPR_WIRE_DEPOT_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION } //! Wire for NW depot exit }; static const SortableSpriteStruct CatenarySpriteData_Tunnel[] = { - { SPR_WIRE_TUNNEL_NE, 0, 8, 8, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE tunnel exit - { SPR_WIRE_TUNNEL_SE, 8, 0, 1, 8, 1, ELRAIL_ELEVATION }, //! Wire for SE tunnel exit - { SPR_WIRE_TUNNEL_SW, 0, 8, 8, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW tunnel exit - { SPR_WIRE_TUNNEL_NW, 8, 0, 1, 8, 1, ELRAIL_ELEVATION } //! Wire for NW tunnel exit + { SPR_WIRE_TUNNEL_NE, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for NE tunnel exit + { SPR_WIRE_TUNNEL_SE, 7, 0, 1, 15, 1, ELRAIL_ELEVATION }, //! Wire for SE tunnel exit + { SPR_WIRE_TUNNEL_SW, 0, 7, 15, 1, 1, ELRAIL_ELEVATION }, //! Wire for SW tunnel exit + { SPR_WIRE_TUNNEL_NW, 7, 0, 1, 15, 1, ELRAIL_ELEVATION } //! Wire for NW tunnel exit }; -- cgit v1.2.3-70-g09d2