From e3f4aecd3722b88f147a1a9b96fd15807de26741 Mon Sep 17 00:00:00 2001 From: tron Date: Thu, 21 Jul 2005 06:13:17 +0000 Subject: (svn r2659) Catch up with reality in the landscape documentation --- docs/landscape.html | 240 ++++++++++++++++++++++++----------------------- docs/landscape_grid.html | 24 ++--- 2 files changed, 137 insertions(+), 127 deletions(-) (limited to 'docs') diff --git a/docs/landscape.html b/docs/landscape.html index b2e307888..930be700f 100644 --- a/docs/landscape.html +++ b/docs/landscape.html @@ -11,7 +11,17 @@

Landscape

-Five arrays are used to encode the information of the contents of each tile. These arrays are referred to as "map_owner", "map2", "map3_lo|_hi", "map_type_and_height" and "map5". The known encodings are listed in the table below. The most important value is the class of a tile, stored in the upper 4 bits of the type_and_height array. The lower 4 bits are used to encode the height and slope data. For a graphical represenation of the tile-layout have a look at Landscape grid page. +Five attributes hold the information about a tile. +These attributes are referred to as + "type_height", + "owner", + "m2", + "m3", + "m4" and + "m5". +The most important value is the class of a tile, stored in the upper 4 bits of the type_height array. +The lower 4 bits are used to encode the height and slope data. +For a graphical represenation of the tile-layout have a look at Landscape grid page.

OTTD's class-specific periodic tile processing routine is called once every +256 ticks for each tile. @@ -22,7 +32,7 @@ OTTD's class-specific periodic tile processing routine is called once every +256 0

map5 bits 4..0: tile type: +

m5 bits 4..0: tile type: @@ -30,7 +40,7 @@ OTTD's class-specific periodic tile processing routine is called once every +256 - + @@ -39,20 +49,20 @@ OTTD's class-specific periodic tile processing routine is called once every +256

`00`	bare land
`01`	1/3 grass
`03`	full grass
`07`	rough land
`0B`	rocks
`0F`	fields; type of fields in map3_lo bits 3..0 (legal values: 0 through 9)
`0F`	fields; type of fields in m3 bits 3..0 (legal values: 0 through 9)
`10`	1/4 snow
`11`	2/4 snow
`12`	3/4 snow
`17`	full desert

map5 bits 7..6: update counter, incremented on every periodic processing for tile types other than 03, 07, 0B and 10 and above, on wraparound the tile is updated (for fields, the type of fields in map3_lo is increased, for other types the tile type in map5 is increased) +
m5 bits 7..6: update counter, incremented on every periodic processing for tile types other than 03, 07, 0B and 10 and above, on wraparound the tile is updated (for fields, the type of fields in m3 is increased, for other types the tile type in m5 is increased)
(for snow and desert, these bits are not used, tile is updated on every periodic processing)
map_owner: owner of the tile (normally 10) +
owner: owner of the tile (normally 10)
map3_hi bits 7..5: type of hedge on the SW border of the tile (1 through 6, or 0=none); bits 4..2: same for the SE border +
m4 bits 7..5: type of hedge on the SW border of the tile (1 through 6, or 0=none); bits 4..2: same for the SE border

1 -map5 bit 7 clear: railway track +m5 bit 7 clear: railway track

map5 bits 0..5: track layout: bit set = track present: +
m5 bits 0..5: track layout: bit set = track present: @@ -61,9 +71,9 @@ map5 bit 7 clear: railway track

bit 0: in the X direction

bit 1: in the Y direction
bit 4: in the west corner (direction N-S)

bit 5: in the east corner (direction N-S)
map5 bit 6 set = with signals: +
m5 bit 6 set = with signals:
- map3_lo bits 7..4: bit set = signal present: +
- m3 bits 7..4: bit set = signal present:
  - For track in the X direction: @@ -90,8 +100,8 @@ map5 bit 7 clear: railway track
    bit 7: signal in the N direction on the track in the W corner
- map2 bits 7..4: bit clear = signal shows red; same bits as in map3_lo
- OpenTTD bits in map3_hi: +
- m2 bits 7..4: bit clear = signal shows red; same bits as in m3
- OpenTTD bits in m4: @@ -102,9 +112,9 @@ map5 bit 7 clear: railway track
  
  bits 2..0: type of signal:
  
  000: normal signals
  bit 3: set = semaphore signals, clear = light signals
map_owner: owner of the track +
owner: owner of the track
map2 bits 0..3: +
m2 bits 0..3: @@ -120,70 +130,70 @@ map5 bit 7 clear: railway track

0 on bare land

1 on grass, no fences
B fence on the N side (track in the S corner)

C on snow or desert
map3_hi bits 0..3 = track type: 0 - conventional railway, 1 - monorail, 2 - maglev -
map3_hi bits 4..7 = Pbs reserved status: +
m4 bits 0..3 = track type: 0 - conventional railway, 1 - monorail, 2 - maglev +
m4 bits 4..7 = Pbs reserved status:

bits 4..6 'Track'number of reserved track + 1, if this is zero it means nothing is reserved on this tile

bit 7 If this is set, then the opposite track ('Track'number^1) is also reserved

-map5 bits 7 and 6 set: railway depot / checkpoints +m5 bits 7 and 6 set: railway depot / checkpoints

map5 value C0..C3: railway depot -
map5 bits 1..0 - direction: exit towards: 00 = NE, 01 = SE, 02 = SW, 03 = NW
map5 value C4..C5: checkpoint +
m5 value C0..C3: railway depot +
m5 bits 1..0 - direction: exit towards: 00 = NE, 01 = SE, 02 = SW, 03 = NW
m5 value C4..C5: checkpoint
bit 0: clear = in X direction, set = in Y direction

-
map_owner: owner of the depot / checkpoint
map3_lo bits 0..3 = track type
map3_lo bit 4 = use custom sprite (valid only for the checkpoint)
map3_lo bit 6 = track on this tile is reserved by pbs
map3_hi = custom station id
owner: owner of the depot / checkpoint
m3 bits 0..3 = track type
m3 bit 4 = use custom sprite (valid only for the checkpoint)
m3 bit 6 = track on this tile is reserved by pbs
m4 = custom station id

2 -map5 bits 7..4 clear: road +m5 bits 7..4 clear: road

map5 bits 3..0: road layout: bit set = road piece present: +
m5 bits 3..0: road layout: bit set = road piece present:

bit 0: NW piece

bit 1: SW piece

bit 2: SE piece

bit 3: NE piece
map_owner: owner of the road
map2: Index into the array of towns, 0 for non-town roads
map3_hi bits 0..3: counter for the roadworks
map3_hi bits 4..6: 0 - on bare land, 1 - on grass, 2 - paved, 3 - with streetlights, 5 - tree-lined, 6 - on grass with road works, 7 - paved with road works
map3_hi bit 7 set = on snow or desert
owner: owner of the road
m2: Index into the array of towns, 0 for non-town roads
m4 bits 0..3: counter for the roadworks
m4 bits 4..6: 0 - on bare land, 1 - on grass, 2 - paved, 3 - with streetlights, 5 - tree-lined, 6 - on grass with road works, 7 - paved with road works
m4 bit 7 set = on snow or desert

-map5 bit 4 set, bits 7..5 clear: level crossing +m5 bit 4 set, bits 7..5 clear: level crossing

map5 bit 3: clear - road in the X direction, set - road in the Y direction (railway track always perpendicular)
map5 bit 2: set if crossing lights are on
map5 bit 0: set if rail track is reserved by pbs
map_owner: owner of the railway track
map2: Index into the array of towns, 0 for non-town roads
map3_lo bits 0..7: owner of the road
map3_hi bits 3..0: track type
map3_hi bits 4..6: 0 - on bare land, 1 - on grass, 2 or higher - paved
map3_hi bit 7 set = on snow or desert
m5 bit 3: clear - road in the X direction, set - road in the Y direction (railway track always perpendicular)
m5 bit 2: set if crossing lights are on
m5 bit 0: set if rail track is reserved by pbs
owner: owner of the railway track
m2: Index into the array of towns, 0 for non-town roads
m3 bits 0..7: owner of the road
m4 bits 3..0: track type
m4 bits 4..6: 0 - on bare land, 1 - on grass, 2 or higher - paved
m4 bit 7 set = on snow or desert

-map5 bit 5 set: road depot +m5 bit 5 set: road depot

map5 bits 3..0 - direction: exit towards: 0 = NE, 1 = SE, 2 = SW, 3 = NW
map_owner: owner of the depot
map3_hi bit 7 set = on snow or desert (not displayed, but set internally)
m5 bits 3..0 - direction: exit towards: 0 = NE, 1 = SE, 2 = SW, 3 = NW
owner: owner of the depot
m4 bit 7 set = on snow or desert (not displayed, but set internally)

3 Town building

map2: Index into the array of towns
map3_hi: town building type: +
m2: Index into the array of towns
m4: town building type:
Note: In the climate list, 'sub-arctic' means below the snow line, and 'snow' means above the snow line in the sub-arctic climate.
@@ -273,13 +283,13 @@ Town building

Type Size Climates Description
6D 1×1 toyland piggy-bank
map3_lo bits 7..6: stage of construction (3 = completed)
map5 bits 2..0: construction counter, for buildings under construction incremented on every periodic tile processing, on wraparound the stage of construction in map3_lo is increased
m3 bits 7..6: stage of construction (3 = completed)
m5 bits 2..0: construction counter, for buildings under construction incremented on every periodic tile processing, on wraparound the stage of construction in m3 is increased
for large office blocks (types 04 and 05):
- map_owner bits 6..0: position of the lift
- map_owner bit 7: if set the lift is moving
- map5 bit 7: if set then map5 bits 5..0 hold the final position of the lift divided by 6 (valid values 0..6 except 1)
- owner bits 6..0: position of the lift
- owner bit 7: if set the lift is moving
- m5 bit 7: if set then m5 bits 5..0 hold the final position of the lift divided by 6 (valid values 0..6 except 1)

Type	Size	Climates	Description
`6D`	1×1	toyland	piggy-bank

@@ -287,9 +297,9 @@ Town building 4 Trees

map5 bits 7..6: number of trees minus one
map5 bits 2..0: growth status: 0..2 - one of trees is growing, 3 - all trees are fully grown, 4..6 - one of trees is withering
map3_lo bits 7..0: type of trees: +
m5 bits 7..6: number of trees minus one
m5 bits 2..0: growth status: 0..2 - one of trees is growing, 3 - all trees are fully grown, 4..6 - one of trees is withering
m3 bits 7..0: type of trees: @@ -300,24 +310,24 @@ Trees

00..0B temperate climate trees

0C..13 sub-arctic climate trees
(note: the actually displayed set of trees depends on both type and number of trees)
map3_hi bits 7..5: type of hedge on the SW border of the tile (1 through 6, or 0=none)
map3_hi bits 4..2: type of hedge on the SE border of the tile (1 through 6, or 0=none)
map2 bits 5..4: +
m4 bits 7..5: type of hedge on the SW border of the tile (1 through 6, or 0=none)
m4 bits 4..2: type of hedge on the SE border of the tile (1 through 6, or 0=none)

m2 bits 5..4: -

`0`	on grass
`1`	on rough land
`2`	on snow or desert; map2 bits 7..6 - amount of snow or desert (for desert always set to 3 in TTD) +
`2`	on snow or desert; m2 bits 7..6 - amount of snow or desert (for desert always set to 3 in TTD)

map2 bits 3..0: update counter, incremented on every periodic processing, on wraparound the growth status is updated (or, if it's 3, a random action is taken)
map_owner: owner (normally 10)
m2 bits 3..0: update counter, incremented on every periodic processing, on wraparound the growth status is updated (or, if it's 3, a random action is taken)
owner: owner (normally 10)

5 Station tile

map5: tile type: +
m5: tile type:

00..07 railway station
00..01 - open platform, 02..03 - open platform with station building, 04....07 - roofed platform @@ -375,18 +385,18 @@ exit towards: 47 - NE, 48 - SE, 49 - SW, 4A
map_owner: owner of the station
map2: index into the array of stations
map3_lo bits 0..3: track type for railway stations, must be 0 for all the other stations
map3_lo bit 4 = use custom sprite (valid only railway stations FOR NOW)
map3lo bit 6 set = track is reserved by pbs (railway stations only)
map3_hi = custom station id
owner: owner of the station
m2: index into the array of stations
m3 bits 0..3: track type for railway stations, must be 0 for all the other stations
m3 bit 4 = use custom sprite (valid only railway stations FOR NOW)
m3 bit 6 set = track is reserved by pbs (railway stations only)
m4 = custom station id

6

map5: tile type: +
m5: tile type: @@ -417,7 +427,7 @@ exit towards: 47 - NE, 48 - SE, 49 - SW, 4A

00 water

01 coast or riverbank
map_owner: owner (for water and coasts normally 11)
owner: owner (for water and coasts normally 11)

@@ -431,19 +441,19 @@ Tiles of this class form an invisible, one tile wide border at the south (bottom 8 Industry tile

map5: type: +

m5: type:
(note: this is not the same as the industry type stored in the array of industries) @@ -457,7 +467,7 @@ Industry tile @@ -466,7 +476,7 @@ Industry tile @@ -477,7 +487,7 @@ Industry tile @@ -504,9 +514,9 @@ Industry tile @@ -514,71 +524,71 @@ while the animation is in progress (see the array

00..06

coal mine - +

`00`	wheel tower when not animated
`01`	wheel tower when animated; animation state in map_owner bits 5..0; map_owner bit 6 set = sound already generated
`01`	wheel tower when animated; animation state in owner bits 5..0; owner bit 6 set = sound already generated

07..0A

power station - +

`08`	chimney
`0A`	transformer; animation progress in map_owner bits 5..2 (valid range `0`..`7`)
`0A`	transformer; animation progress in owner bits 5..2 (valid range `0`..`7`)

0B..0F sawmill

1D..20

oil wells - +

`1D`	not animated
`1E`..`20`	various stages of animation; progress of animation in map_owner bits 1..0
`1E`..`20`	various stages of animation; progress of animation in owner bits 1..0

21..26 farm

2F..33

copper ore mine - +

`2F`	wheel tower when not animated
`30`	wheel tower when animated; animation state in map_owner bits 5..0; map_owner bit 6 set = sound already generated
`30`	wheel tower when animated; animation state in owner bits 5..0; owner bit 6 set = sound already generated
`31`	chimney

48..58

gold mine - +

`4F`	wheel tower when not animated
`58`	wheel tower when animated; animation state in map_owner bits 5..0; map_owner bit 6 set = sound already generated
`58`	wheel tower when animated; animation state in owner bits 5..0; owner bit 6 set = sound already generated

59..5A bank (sub-arctic or sub-tropical climate)

8A..8D toy shop

8E..93

toy factory - +

`8F`	animated part; animation state in map3_lo (valid range `00`..`31`) -tile animation is started (map3_hi zeroed) on the periodic processing if field `2C` in the corresponding industry array entry is nonzero -while the animation is in progress (see the array at `04328`) map3_hi holds the number of animation cycles that have already taken place; when this number reaches 8 the animation is stopped
`8F`	animated part; animation state in m3 (valid range `00`..`31`) +tile animation is started (m4 zeroed) on the periodic processing if field `2C` in the corresponding industry array entry is nonzero +while the animation is in progress (see the array at `04328`) m4 holds the number of animation cycles that have already taken place; when this number reaches 8 the animation is stopped

94..9B plastic fountains (various stages of cyclic animation)

A0..A3

bubble generator - +

`A1`	generators
`A2`	bubble capture facility; animation state in map3_lo (valid range `00`..`27`)
`A2`	bubble capture facility; animation state in m3 (valid range `00`..`27`)

A4..A6

toffee quarry - +

`A5`	animated part; animation state in map3_lo (valid range `00`..`45`)
`A5`	animated part; animation state in m3 (valid range `00`..`45`)

A7..AE

sugar mine - +

`AE`	animated part; animation state in map3_lo (valid range `00`..`5F`)
`AE`	animated part; animation state in m3 (valid range `00`..`5F`)

map2: index into the array of industries +
m2: index into the array of industries
map_owner bit 7: clear = under construction +
owner bit 7: clear = under construction
- map_owner bits 4..2: construction counter, for buildings under construction incremented on every periodic tile processing +
- owner bits 4..2: construction counter, for buildings under construction incremented on every periodic tile processing
map_owner bits 1..0: stage of construction (3 = completed), incremented when the construction counter wraps around +
owner bits 1..0: stage of construction (3 = completed), incremented when the construction counter wraps around
the meaning is different for some animated tiles which are never under construction (types 01, 1E..20, 30, 58; see above)

9 -map5 bits 7..4 clear: tunnel entrance/exit +m5 bits 7..4 clear: tunnel entrance/exit

map5 bits 3..2: 0 - railway tunnel, 1 - road tunnel
map5 bits 1..0 - direction: entrance towards: 0 = NE, 1 = SE, 2 = SW, 3 = NW
map_owner: owner of the tunnel
map3_lo bits 3..0 = track type for railway tunnel, must be 0 for road tunnel
map3_hi bit 7 set = on snow or desert
map3hi bit 0 set = track with 'Track'number 0 is reserved by pbs
map3hi bit 1 set = track with 'Track'number 1 is reserved by pbs
m5 bits 3..2: 0 - railway tunnel, 1 - road tunnel
m5 bits 1..0 - direction: entrance towards: 0 = NE, 1 = SE, 2 = SW, 3 = NW
owner: owner of the tunnel
m3 bits 3..0 = track type for railway tunnel, must be 0 for road tunnel
m4 bit 7 set = on snow or desert
m4 bit 0 set = track with 'Track'number 0 is reserved by pbs
m4 bit 1 set = track with 'Track'number 1 is reserved by pbs

-map5 bit 7 set: bridge +m5 bit 7 set: bridge

-map5 bit 6 clear: bridge ending +m5 bit 6 clear: bridge ending
- map5 bit 5: clear - northern, set - southern ending
- map3_lo bits 3..0 = type of track on the bridge, must be 0 for road bridge
- map_owner: owner of the bridge
- m5 bit 5: clear - northern, set - southern ending
- m3 bits 3..0 = type of track on the bridge, must be 0 for road bridge
- owner: owner of the bridge
-map5 bit 6 set: bridge middle part +m5 bit 6 set: bridge middle part
- map5 bit 5 clear: +
- m5 bit 5 clear:
  - map5 bits 4..3: land under bridge: 0 - grass, snow or desert, 1 - water
  - m5 bits 4..3: land under bridge: 0 - grass, snow or desert, 1 - water
  -map5 bit 5 set: +m5 bit 5 set:
  - map5 bits 4..3: transport route under bridge: 0 - railway, 1 - road
  - m5 bits 4..3: transport route under bridge: 0 - railway, 1 - road
  -
- map3_lo bits 7..4 = type of track on the bridge, must be 0 for road bridge
- map3_lo bits 3..0 = type of track under the bridge, if any
- map2 bits 3..0: bridge piece (0..5) -
- map_owner: owner of the land under bridge
- m3 bits 7..4 = type of track on the bridge, must be 0 for road bridge
- m3 bits 3..0 = type of track under the bridge, if any
- m2 bits 3..0: bridge piece (0..5) +
- owner: owner of the land under bridge
map5 bits 2..1: 0 - railway bridge, 1 - road bridge
map5 bit 0: clear - bridge in the X direction, set - bridge in the Y direction
map2 bits 7..4: bridge type: +
m5 bits 2..1: 0 - railway bridge, 1 - road bridge
m5 bit 0: clear - bridge in the X direction, set - bridge in the Y direction
m2 bits 7..4: bridge type: @@ -593,13 +603,13 @@ map5 bit 5 set:

Type Max. speed (mph) Description

0 20 wooden
9 160 girder, steel

A 200 tubular, steel
map3_hi bit 7 set = on snow or desert
m4 bit 7 set = on snow or desert

Type	Max. speed (mph)	Description
`0`	20	wooden
`9`	160	girder, steel
`A`	200	tubular, steel

A

map5: tile type: +
m5: tile type: @@ -608,7 +618,7 @@ map5 bit 5 set:

00 transmitter

01 lighthouse
80..93 company headquarters (5 sets of 4 tiles each, updated quarterly depending on the company performance)
map_owner: owner of the object (for lighthouses and transmitters normally 10)
owner: owner of the object (for lighthouses and transmitters normally 10)

diff --git a/docs/landscape_grid.html b/docs/landscape_grid.html index fd0a3d238..b8c615e08 100644 --- a/docs/landscape_grid.html +++ b/docs/landscape_grid.html @@ -14,22 +14,22 @@

Landscape

-Five arrays are used to encode the information of the contents of the tile. +Five attributes hold the information about a tile. This can be seen in the Landscape document. This page tries to give an overview of used and free bits of the array so you can quickly see what is used and what is not.

O - bit is free
X - bit is used
- bit of _map_* is abused for different purposes
- bit of attribute is abused for different purposes
NOTE: counting the bits starts with bit0 in the most left position (eg. a bit screwed LE format; BIT by BIT)

_map_owner[] - 8 bits in size, used to identify the owner of that tile (eg piece of rail, bridge, etc.).
_map2[] - 16 bits in size, used to identify the index of the given tile (object) in the (object-)array.
_map3[] - 16 bits in size, which is split up into _map3lo[] and _map3hi[] is used for general storage.
_map_type_and_height[] - 8 bits in size, stores tile height (lower 4 bits) and tile class (upper 4 bits).
_map5[] - 8 bits in size, is used for general storage.
type_height - 8 bits in size, stores tile height (lower 4 bits) and tile class (upper 4 bits)
owner - 8 bits in size, used to identify the owner of that tile (eg piece of rail, bridge, etc.)
m2 - 16 bits in size, used to identify the index of the given tile (object) in the (object-)array
m3/m4 - 16 bits in size, which is split up into m3 and m4 is used for general storage
m5 - 8 bits in size, is used for general storage

- - - - - + + + + + -- cgit v1.2.3-54-g00ecf

class	_map_owner[L1] (8)	_map2[L2] (16)	_map3[lo& hi,L3] (16)	_map_type_and_height[L4] (8)	_map5[L5] (8)	owner[L1] (8)	m2[L2] (16)	m3/m4[L3] (16)	type_height[L4] (8)	m5[L5] (8)
bits

bit 0:	in the X direction
bit 1:	in the Y direction
bit 4:	in the west corner (direction N-S)
bit 5:	in the east corner (direction N-S)

bits 2..0:	type of signal:
`000`:	normal signals
bit 3:	set = semaphore signals, clear = light signals

`0`	on bare land
`1`	on grass, no fences
`B`	fence on the N side (track in the S corner)
`C`	on snow or desert

`bits 4..6`	'Track'number of reserved track + 1, if this is zero it means nothing is reserved on this tile
`bit 7`	If this is set, then the opposite track ('Track'number^1) is also reserved

`00`..`0B`	temperate climate trees
`0C`..`13`	sub-arctic climate trees

`00`..`07`	railway station `00`..`01` - open platform, `02`..`03` - open platform with station building, `04`....`07` - roofed platform @@ -375,18 +385,18 @@ exit towards: `47` - NE, `48` - SE, `49` - SW, `4A`

`00`	transmitter
`01`	lighthouse
`80`..`93`	company headquarters (5 sets of 4 tiles each, updated quarterly depending on the company performance)

bit 0:	NW piece
bit 1:	SW piece
bit 2:	SE piece
bit 3:	NE piece

`00`	water
`01`	coast or riverbank