From 4acb8d5364fbd6fbb69468c14beb57b751a7e2e4 Mon Sep 17 00:00:00 2001 From: celestar Date: Wed, 5 Apr 2006 08:28:03 +0000 Subject: (svn r4281) -Cleanup: Begun cleaning up elrail code a bit, mostly comments and enum/array alignment --- elrail.c | 26 +++-- table/elrail_data.h | 319 +++++++++++++++++++++++++++++++++------------------- 2 files changed, 217 insertions(+), 128 deletions(-) diff --git a/elrail.c b/elrail.c index 5b4a628fc..ef0a44cbe 100644 --- a/elrail.c +++ b/elrail.c @@ -1,6 +1,6 @@ /* $Id$ */ /** @file elrail.c - * This file deals with displaying wires and pylons for electric railway systems. + This file deals with displaying wires and pylons for electric railways.

Basics

Tile Types

@@ -22,21 +22,23 @@ Group 3: Tiles with both an odd X and Y coordnate.

Control Points

A Pylon Control Point (PCP) is a position where a wire (or rather two) is mounted onto a pylon. -Each NRT does contain 4 PCPs which are mapped to a byte -variable and are represented by the DiagDirection enum: +Each NRT does contain 4 PCPs which are bitmapped to a byte +variable and are represented by the DiagDirection enum -A wire that ends on the PCP has a dark ending, otherwise the end is bright.

+Each track ends on two PCPs and thus requires one pylon on each end. However, +there is one exception: Straight-and-level tracks only have one pylon every +other tile. -Now on each edge there are two PCPs: One from each adjacent tile. Both PCPs are merged -using an OR matrix (i. e. if one tile needs a PCP at the postion in question, both -tiles get it). +Now on each edge there are two PCPs: One from each adjacent tile. Both PCPs +are merged using an OR operation (i. e. if one tile needs a PCP at the postion +in question, both tiles get it).

Position Points

-A Pylon Position Point (PPP) is a position where a pylon is located on the ground. -Each PCP owns 8 in (45 degree steps) PPPs that are located around it. PPPs are numbered -0 to 7 with 0 starting north and numbering in clockwise direction. Each track bit has PPPs -that are impossible (because the pylon would be situated on the track), preferred (because -the pylon would be rectangular to the track). PPPs are represented by the Direction enum. +A Pylon Position Point (PPP) is a position where a pylon is located on the +ground. Each PCP owns 8 in (45 degree steps) PPPs that are located around +it. PPPs are represented using the Direction enum. Each track bit has PPPs +that are impossible (because the pylon would be situated on the track) and +some that are preferred (because the pylon would be rectangular to the track). diff --git a/table/elrail_data.h b/table/elrail_data.h index 984cc9594..c9965f51d 100644 --- a/table/elrail_data.h +++ b/table/elrail_data.h @@ -1,10 +1,12 @@ /* $Id */ -/** @file elrail_data.h Stores all the data for overhead wire and pylon drawing. @see elrail.c */ +/** @file elrail_data.h Stores all the data for overhead wire and pylon drawing. + @see elrail.c */ #ifndef ELRAIL_DATA_H #define ELRAIL_DATA_H -/** Tile Location group. This defines whether the X and or Y coordinate of a tile is even */ +/** Tile Location group. + This defines whether the X and or Y coordinate of a tile is even */ typedef enum TLG { XEVEN_YEVEN = 0, XEVEN_YODD = 1, @@ -13,9 +15,9 @@ typedef enum TLG { TLG_END } TLG; -/** When determining the pylon configuration on the edge, two tiles are taken into account: - * the tile being drawn itself (the home tile, the one in ti->tile), and the neighbouring tile - */ +/** When determining the pylon configuration on the edge, two tiles are taken + into account: the tile being drawn itself (the home tile, the one in + ti->tile), and the neighbouring tile */ typedef enum { TS_HOME = 0, TS_NEIGHBOUR = 1, @@ -29,56 +31,151 @@ enum { /** Which PPPs are possible at all on a given PCP */ static byte AllowedPPPonPCP[DIAGDIR_END] = { - 1 << DIR_N | 1 << DIR_E | 1 << DIR_SE | 1 << DIR_S | 1 << DIR_W | 1 << DIR_NW, - 1 << DIR_N | 1 << DIR_NE | 1 << DIR_E | 1 << DIR_S | 1 << DIR_SW | 1 << DIR_W, - 1 << DIR_N | 1 << DIR_E | 1 << DIR_SE | 1 << DIR_S | 1 << DIR_W | 1 << DIR_NW, - 1 << DIR_N | 1 << DIR_NE | 1 << DIR_E | 1 << DIR_S | 1 << DIR_SW | 1 << DIR_W, + 1 << DIR_N | 1 << DIR_E | 1 << DIR_SE | 1 << DIR_S | 1 << DIR_W | 1 << DIR_NW, + 1 << DIR_N | 1 << DIR_NE | 1 << DIR_E | 1 << DIR_S | 1 << DIR_SW | 1 << DIR_W, + 1 << DIR_N | 1 << DIR_E | 1 << DIR_SE | 1 << DIR_S | 1 << DIR_W | 1 << DIR_NW, + 1 << DIR_N | 1 << DIR_NE | 1 << DIR_E | 1 << DIR_S | 1 << DIR_SW | 1 << DIR_W, }; -/** Which of the PPPs are inside the tile. For the two PPPs on the tile border the following system is used: - if you rotate the PCP so that it is in the north, the eastern PPP belongs to the tile. */ +/** Which of the PPPs are inside the tile. For the two PPPs on the tile border + the following system is used: if you rotate the PCP so that it is in the + north, the eastern PPP belongs to the tile. */ static byte OwnedPPPonPCP[DIAGDIR_END] = { - 1 << DIR_SE | 1 << DIR_S | 1 << DIR_SW | 1 << DIR_W, - 1 << DIR_N | 1 << DIR_SW | 1 << DIR_W | 1 << DIR_NW, - 1 << DIR_N | 1 << DIR_NE | 1 << DIR_E | 1 << DIR_NW, - 1 << DIR_NE | 1 << DIR_E | 1 << DIR_SE | 1 << DIR_S + 1 << DIR_SE | 1 << DIR_S | 1 << DIR_SW | 1 << DIR_W, + 1 << DIR_N | 1 << DIR_SW | 1 << DIR_W | 1 << DIR_NW, + 1 << DIR_N | 1 << DIR_NE | 1 << DIR_E | 1 << DIR_NW, + 1 << DIR_NE | 1 << DIR_E | 1 << DIR_SE | 1 << DIR_S +}; + +/** Maps a track bit onto two PCP positions */ +static const DiagDirection PCPpositions[TRACK_END][2] = { + {DIAGDIR_NE, DIAGDIR_SW}, /* X */ + {DIAGDIR_SE, DIAGDIR_NW}, /* Y */ + {DIAGDIR_NW, DIAGDIR_NE}, /* UPPER */ + {DIAGDIR_SE, DIAGDIR_SW}, /* LOWER */ + {DIAGDIR_SW, DIAGDIR_NW}, /* LEFT */ + {DIAGDIR_NE, DIAGDIR_SE}, /* RIGHT */ }; -/** Preferred points of each trackbit. Those are the ones perpendicular to the track, plus the point in - extension of the track (to mark end-of-track).*/ +#define PCP_NOT_ON_TRACK 0xFF +/** Preferred points of each trackbit. Those are the ones perpendicular to the + track, plus the point in extension of the track (to mark end-of-track). PCPs + which are not on either end of the track are fully preferred. + @see PCPpositions */ static byte PreferredPPPofTrackBitAtPCP[TRACK_END][DIAGDIR_END] = { - {1 << DIR_NE | 1 << DIR_SE | 1 << DIR_NW, 0xFF, 1 << DIR_SE | 1 << DIR_SW | 1 << DIR_NW, 0xFF }, /* X */ - {0xFF, 1 << DIR_NE | 1 << DIR_SE | 1 << DIR_SW, 0xFF, 1 << DIR_SW | 1 << DIR_NW | 1 << DIR_NE }, /* Y */ - {1 << DIR_E | 1 << DIR_N | 1 << DIR_S, 0xFF, 0xFF, 1 << DIR_W | 1 << DIR_N | 1 << DIR_S}, /* UPPER */ - {0xFF, 1 << DIR_E | 1 << DIR_N | 1 << DIR_S, 1 << DIR_W | 1 << DIR_N | 1 << DIR_S, 0xFF}, /* LOWER */ - {0xFF, 0xFF, 1 << DIR_S | 1 << DIR_E | 1 << DIR_W, 1 << DIR_N | 1 << DIR_E | 1 << DIR_W}, /* LEFT */ - {1 << DIR_N | 1 << DIR_E | 1 << DIR_W, 1 << DIR_S | 1 << DIR_E | 1 << DIR_W, 0xFF, 0xFF}, /* RIGHT */ + { /* X */ + 1 << DIR_NE | 1 << DIR_SE | 1 << DIR_NW, /* NE */ + PCP_NOT_ON_TRACK, /* SE */ + 1 << DIR_SE | 1 << DIR_SW | 1 << DIR_NW, /* SW */ + PCP_NOT_ON_TRACK /* NE */ + }, { /* Y */ + PCP_NOT_ON_TRACK, + 1 << DIR_NE | 1 << DIR_SE | 1 << DIR_SW, + PCP_NOT_ON_TRACK, + 1 << DIR_SW | 1 << DIR_NW | 1 << DIR_NE + }, { /* UPPER */ + 1 << DIR_E | 1 << DIR_N | 1 << DIR_S, + PCP_NOT_ON_TRACK, + PCP_NOT_ON_TRACK, + 1 << DIR_W | 1 << DIR_N | 1 << DIR_S + }, { /* LOWER */ + PCP_NOT_ON_TRACK, + 1 << DIR_E | 1 << DIR_N | 1 << DIR_S, + 1 << DIR_W | 1 << DIR_N | 1 << DIR_S, + PCP_NOT_ON_TRACK + }, { /* LEFT */ + PCP_NOT_ON_TRACK, + PCP_NOT_ON_TRACK, + 1 << DIR_S | 1 << DIR_E | 1 << DIR_W, + 1 << DIR_N | 1 << DIR_E | 1 << DIR_W + }, { /* RIGHT */ + 1 << DIR_N | 1 << DIR_E | 1 << DIR_W, + 1 << DIR_S | 1 << DIR_E | 1 << DIR_W, + PCP_NOT_ON_TRACK, + PCP_NOT_ON_TRACK + } }; +#undef PCP_NOT_ON_TRACK #define NUM_IGNORE_GROUPS 3 -/** In case we have a staight line, we place pylon only every two tiles, so there are certain tiles - which we ignore. A straight line is found if we have exactly two preferred points.*/ +#define NO_IGNORE 0xFF +/** In case we have a staight line, we place pylon only every two tiles, + so there are certain tiles which we ignore. A straight line is found if + we have exactly two preferred points.*/ static byte IgnoredPCP[NUM_IGNORE_GROUPS][TLG_END][DIAGDIR_END] = { - { - {1 << DIR_N | 1 << DIR_S , 1 << DIR_NE | 1 << DIR_SW, 1 << DIR_NW | 1 << DIR_SE, 1 << DIR_W | 1 << DIR_E}, - {0xFF , 1 << DIR_E | 1 << DIR_W, 1 << DIR_NW | 1 << DIR_SE, 1 << DIR_NE | 1 << DIR_SW}, - {1 << DIR_NW | 1 << DIR_SE, 1 << DIR_NE | 1 << DIR_SW, 1 << DIR_N | 1 << DIR_S , 0xFF}, - {1 << DIR_NW | 1 << DIR_SE, 0xFF , 0xFF, 1 << DIR_NE | 1 << DIR_SW} + { /* Ignore group 1 */ + { /* X even, Y even */ + 1 << DIR_N | 1 << DIR_S, + 1 << DIR_NE | 1 << DIR_SW, + 1 << DIR_NW | 1 << DIR_SE, + 1 << DIR_W | 1 << DIR_E + }, { /* X even, Y odd */ + 0xFF, + 1 << DIR_E | 1 << DIR_W, + 1 << DIR_NW | 1 << DIR_SE, + 1 << DIR_NE | 1 << DIR_SW + }, { /* X odd, Y even */ + 1 << DIR_NW | 1 << DIR_SE, + 1 << DIR_NE | 1 << DIR_SW, + 1 << DIR_N | 1 << DIR_S , + 0xFF + }, { /* X odd, Y odd */ + 1 << DIR_NW | 1 << DIR_SE, + 0xFF, + 0xFF, + 1 << DIR_NE | 1 << DIR_SW + } }, - { - {1 << DIR_E | 1 << DIR_W, 1 << DIR_N | 1 << DIR_S, 0xFF, 1 << DIR_E | 1 << DIR_W}, - {0xFF, 0xFF, 1 << DIR_N | 1 << DIR_S, 1 << DIR_N | 1 << DIR_S}, - {0xFF, 1 << DIR_E | 1 << DIR_W, 1 << DIR_E | 1 << DIR_W, 1 << DIR_N | 1 << DIR_S}, - {1 << DIR_N | 1 << DIR_S, 1 << DIR_N | 1 << DIR_S, 0xFF, 1 << DIR_E | 1 << DIR_W} + { /* Ignore group 2 */ + { + 1 << DIR_E | 1 << DIR_W, + 1 << DIR_N | 1 << DIR_S, + 0xFF, + 1 << DIR_E | 1 << DIR_W + }, { + 0xFF, + 0xFF, + 1 << DIR_N | 1 << DIR_S, + 1 << DIR_N | 1 << DIR_S + }, { + 0xFF, + 1 << DIR_E | 1 << DIR_W, + 1 << DIR_E | 1 << DIR_W, + 1 << DIR_N | 1 << DIR_S + }, { + 1 << DIR_N | 1 << DIR_S, + 1 << DIR_N | 1 << DIR_S, + 0xFF, + 1 << DIR_E | 1 << DIR_W + } }, - { - {0xFF, 0xFF, 0xFF, 0xFF}, - {0xFF, 0xFF, 1 << DIR_E | 1 << DIR_W, 0xFF}, - {0xFF, 0xFF, 0xFF, 0xFF}, - {1 << DIR_E | 1 << DIR_W, 0xFF, 0xFF, 0xFF} + { /* Ignore group 3 */ + { + 0xFF, + 0xFF, + 0xFF, + 0xFF + }, { + 0xFF, + 0xFF, + 1 << DIR_E | 1 << DIR_W, + 0xFF + }, { + 0xFF, + 0xFF, + 0xFF, + 0xFF + }, { + 1 << DIR_E | 1 << DIR_W, + 0xFF, + 0xFF, + 0xFF + } } }; +#undef NO_IGNORE + /** Which pylons can definately NOT be built */ static byte DisallowedPPPofTrackBitAtPCP[TRACK_END][DIAGDIR_END] = { {1 << DIR_SW | 1 << DIR_NE, 0, 1 << DIR_SW | 1 << DIR_NE, 0 }, /* X */ @@ -89,6 +186,72 @@ static byte DisallowedPPPofTrackBitAtPCP[TRACK_END][DIAGDIR_END] = { {1 << DIR_S | 1 << DIR_N, 1 << DIR_S | 1 << DIR_N, 0, 0, }, /* RIGHT */ }; +/* This array stores which track bits can meet at a tile edge */ +static const Track PPPtracks[DIAGDIR_END][TRACKS_AT_PCP] = { + {TRACK_X, TRACK_X, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT}, + {TRACK_Y, TRACK_Y, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT}, + {TRACK_X, TRACK_X, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT}, + {TRACK_Y, TRACK_Y, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT}, +}; + +/* takes each of the 8 track bits from the array above and + assigns it to the home tile or neighbour tile */ +static const TileSource trackorigin[DIAGDIR_END][TRACKS_AT_PCP] = { + {TS_HOME, TS_NEIGHBOUR, TS_HOME , TS_NEIGHBOUR, TS_NEIGHBOUR, TS_HOME }, + {TS_HOME, TS_NEIGHBOUR, TS_NEIGHBOUR, TS_HOME , TS_NEIGHBOUR, TS_HOME }, + {TS_HOME, TS_NEIGHBOUR, TS_NEIGHBOUR, TS_HOME , TS_HOME , TS_NEIGHBOUR}, + {TS_HOME, TS_NEIGHBOUR, TS_HOME , TS_NEIGHBOUR, TS_HOME , TS_NEIGHBOUR}, +}; + +/* Several PPPs maybe exist, here they are sorted in order of preference. */ +static const Direction PPPorder[DIAGDIR_END][TLG_END][DIR_END] = { /* X - Y */ + { /* PCP 0 */ + {DIR_NE, DIR_NW, DIR_SE, DIR_SW, DIR_N, DIR_E, DIR_S, DIR_W}, /* evn - evn */ + {DIR_NE, DIR_SE, DIR_SW, DIR_NW, DIR_S, DIR_W, DIR_N, DIR_E}, /* evn - odd */ + {DIR_SW, DIR_NW, DIR_NE, DIR_SE, DIR_S, DIR_W, DIR_N, DIR_E}, /* odd - evn */ + {DIR_SW, DIR_SE, DIR_NE, DIR_NW, DIR_N, DIR_E, DIR_S, DIR_W}, /* odd - odd */ + }, {/* PCP 1 */ + {DIR_NE, DIR_NW, DIR_SE, DIR_SW, DIR_S, DIR_E, DIR_N, DIR_W}, /* evn - evn */ + {DIR_NE, DIR_SE, DIR_SW, DIR_NW, DIR_N, DIR_W, DIR_S, DIR_E}, /* evn - odd */ + {DIR_SW, DIR_NW, DIR_NE, DIR_SE, DIR_N, DIR_W, DIR_S, DIR_E}, /* odd - evn */ + {DIR_SW, DIR_SE, DIR_NE, DIR_NW, DIR_S, DIR_E, DIR_N, DIR_W}, /* odd - odd */ + }, {/* PCP 2 */ + {DIR_NE, DIR_NW, DIR_SE, DIR_SW, DIR_S, DIR_W, DIR_N, DIR_E}, /* evn - evn */ + {DIR_NE, DIR_SE, DIR_SW, DIR_NW, DIR_N, DIR_E, DIR_S, DIR_W}, /* evn - odd */ + {DIR_SW, DIR_NW, DIR_NE, DIR_SE, DIR_N, DIR_E, DIR_S, DIR_W}, /* odd - evn */ + {DIR_SW, DIR_SE, DIR_NE, DIR_NW, DIR_S, DIR_W, DIR_N, DIR_E}, /* odd - odd */ + }, {/* PCP 3 */ + {DIR_NE, DIR_NW, DIR_SE, DIR_SW, DIR_N, DIR_W, DIR_S, DIR_E}, /* evn - evn */ + {DIR_NE, DIR_SE, DIR_SW, DIR_NW, DIR_S, DIR_E, DIR_N, DIR_W}, /* evn - odd */ + {DIR_SW, DIR_NW, DIR_NE, DIR_SE, DIR_S, DIR_E, DIR_N, DIR_W}, /* odd - evn */ + {DIR_SW, DIR_SE, DIR_NE, DIR_NW, DIR_N, DIR_W, DIR_S, DIR_E}, /* odd - odd */ + } +}; +/* Geometric placement of the PCP relative to the tile origin */ +static const int8 x_pcp_offsets[DIAGDIR_END] = {0, 8, 15, 8}; +static const int8 y_pcp_offsets[DIAGDIR_END] = {8, 15, 8, 0}; +/* Geometric placement of the PPP relative to the PCP*/ +static const int8 x_ppp_offsets[DIR_END] = {-3, -4, -3, 0, +3, +4, +3, 0}; +static const int8 y_ppp_offsets[DIR_END] = {-3, 0, +3, +4, +3, 0, -3, -4}; +/* The type of pylon to draw at each PPP */ +static const SpriteID pylons_normal[] = { + SPR_PYLON_EW_N, + SPR_PYLON_Y_NE, + SPR_PYLON_NS_E, + SPR_PYLON_X_SE, + SPR_PYLON_EW_S, + SPR_PYLON_Y_SW, + SPR_PYLON_NS_W, + SPR_PYLON_X_NW +}; + +static const SpriteID pylons_bridge[] = { + SPR_PYLON_X_NW, + SPR_PYLON_X_SE, + SPR_PYLON_Y_NE, + SPR_PYLON_Y_SW +}; + typedef struct { SpriteID image; int8 x_offset; @@ -237,82 +400,6 @@ typedef enum { INVALID_CATENARY = 0xFF } CatenarySprite; -/* This array stores which track bits can meet at a tile edge */ -static const Track PPPtracks[DIAGDIR_END][TRACKS_AT_PCP] = { - {TRACK_X, TRACK_X, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT}, - {TRACK_Y, TRACK_Y, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT}, - {TRACK_X, TRACK_X, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT}, - {TRACK_Y, TRACK_Y, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT}, -}; - -/* takes each of the 8 track bits from the array above and - assigns it to the home tile or neighbour tile */ -static const TileSource trackorigin[DIAGDIR_END][TRACKS_AT_PCP] = { - {TS_HOME, TS_NEIGHBOUR, TS_HOME , TS_NEIGHBOUR, TS_NEIGHBOUR, TS_HOME }, - {TS_HOME, TS_NEIGHBOUR, TS_NEIGHBOUR, TS_HOME , TS_NEIGHBOUR, TS_HOME }, - {TS_HOME, TS_NEIGHBOUR, TS_NEIGHBOUR, TS_HOME , TS_HOME , TS_NEIGHBOUR}, - {TS_HOME, TS_NEIGHBOUR, TS_HOME , TS_NEIGHBOUR, TS_HOME , TS_NEIGHBOUR}, -}; - -/* Several PPPs maybe exist, here they are sorted in order of preference. */ -static const Direction PPPorder[DIAGDIR_END][TLG_END][DIR_END] = { /* X - Y */ - { /* PCP 0 */ - {DIR_NE, DIR_NW, DIR_SE, DIR_SW, DIR_N, DIR_E, DIR_S, DIR_W}, /* evn - evn */ - {DIR_NE, DIR_SE, DIR_SW, DIR_NW, DIR_S, DIR_W, DIR_N, DIR_E}, /* evn - odd */ - {DIR_SW, DIR_NW, DIR_NE, DIR_SE, DIR_S, DIR_W, DIR_N, DIR_E}, /* odd - evn */ - {DIR_SW, DIR_SE, DIR_NE, DIR_NW, DIR_N, DIR_E, DIR_S, DIR_W}, /* odd - odd */ - }, {/* PCP 1 */ - {DIR_NE, DIR_NW, DIR_SE, DIR_SW, DIR_S, DIR_E, DIR_N, DIR_W}, /* evn - evn */ - {DIR_NE, DIR_SE, DIR_SW, DIR_NW, DIR_N, DIR_W, DIR_S, DIR_E}, /* evn - odd */ - {DIR_SW, DIR_NW, DIR_NE, DIR_SE, DIR_N, DIR_W, DIR_S, DIR_E}, /* odd - evn */ - {DIR_SW, DIR_SE, DIR_NE, DIR_NW, DIR_S, DIR_E, DIR_N, DIR_W}, /* odd - odd */ - }, {/* PCP 2 */ - {DIR_NE, DIR_NW, DIR_SE, DIR_SW, DIR_S, DIR_W, DIR_N, DIR_E}, /* evn - evn */ - {DIR_NE, DIR_SE, DIR_SW, DIR_NW, DIR_N, DIR_E, DIR_S, DIR_W}, /* evn - odd */ - {DIR_SW, DIR_NW, DIR_NE, DIR_SE, DIR_N, DIR_E, DIR_S, DIR_W}, /* odd - evn */ - {DIR_SW, DIR_SE, DIR_NE, DIR_NW, DIR_S, DIR_W, DIR_N, DIR_E}, /* odd - odd */ - }, {/* PCP 3 */ - {DIR_NE, DIR_NW, DIR_SE, DIR_SW, DIR_N, DIR_W, DIR_S, DIR_E}, /* evn - evn */ - {DIR_NE, DIR_SE, DIR_SW, DIR_NW, DIR_S, DIR_E, DIR_N, DIR_W}, /* evn - odd */ - {DIR_SW, DIR_NW, DIR_NE, DIR_SE, DIR_S, DIR_E, DIR_N, DIR_W}, /* odd - evn */ - {DIR_SW, DIR_SE, DIR_NE, DIR_NW, DIR_N, DIR_W, DIR_S, DIR_E}, /* odd - odd */ - } -}; -/* Geometric placement of the PCP relative to the tile origin */ -static const int8 x_pcp_offsets[DIAGDIR_END] = {0, 8, 15, 8}; -static const int8 y_pcp_offsets[DIAGDIR_END] = {8, 15, 8, 0}; -/* Geometric placement of the PPP relative to the PCP*/ -static const int8 x_ppp_offsets[DIR_END] = {-3, -4, -3, 0, +3, +4, +3, 0}; -static const int8 y_ppp_offsets[DIR_END] = {-3, 0, +3, +4, +3, 0, -3, -4}; -/* The type of pylon to draw at each PPP */ -static const SpriteID pylons_normal[] = { - SPR_PYLON_EW_N, - SPR_PYLON_Y_NE, - SPR_PYLON_NS_E, - SPR_PYLON_X_SE, - SPR_PYLON_EW_S, - SPR_PYLON_Y_SW, - SPR_PYLON_NS_W, - SPR_PYLON_X_NW -}; - -static const SpriteID pylons_bridge[] = { - SPR_PYLON_X_NW, - SPR_PYLON_X_SE, - SPR_PYLON_Y_NE, - SPR_PYLON_Y_SW -}; - -/* Maps a track bit onto two PCP positions */ -static const byte PCPpositions[TRACK_END][2] = { - {0, 2}, /* X */ - {1, 3}, /* Y */ - {3, 0}, /* UPPER */ - {1, 2}, /* LOWER */ - {2, 3}, /* LEFT */ - {0, 1}, /* RIGHT */ -}; - /* Selects a Wire (with white and grey ends) depending on whether: a) none (should never happen) b) the first -- cgit v1.2.3-70-g09d2