| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Rewrite handling of station classes.
Allow for more than 8 station tile layouts.
Start of code to unload custom stations.
|
|
long trains
-Trains will now remember the length of stations it visits and sell cars
when being autoreplaced if they became too long
-If it needs to remove cars, then it starts from the front and sells
all it can find until the train is short enough
-This only works for trains, that knows the station length of the route
so a full uninterrupted run is needed
-a train needs 1-2 runs to detect if the shortest station is expanded
-This feature can be turned on and off in the train replace window
and each company can have it's own setting
-NOTE: minor savegame version bump
|
|
comments, excess empty lines, minor other changes
nothing spectacular, just some stuff, which piled up
|
|
|
|
int/uint/int16/byte/-1 with proper types and constants
|
|
pointers instead of copying the data around.
|
|
s/byte/PlayerID/
s/int/PlayerID/
and related changes
|
|
functions that don't change their pointer parameters
- change a lot of byte player types to PlayerID
- beautify header files, same "#endif /* filename */" ending
|
|
|
|
|
|
structs, this doesn't change the saved format for now. It's a stepping stone for further changes.
|
|
|
|
|
|
extensive rewrite and global/local-cargo ID juggling and bitmasking. However with this done it looks better as well and is compatible with newgrf handling. Big thanks to HackyKid for doing most of the work. This also closes patch "[ 1199277 ] Command checks"
|
|
|
|
Buoys will now try to get within 3 tiles of a buoy instead of a the actual buoy tile. This gets ships to got past buoys in a realistic (IMO) way instead of barging right through them.
- Fix: [NPF] Trains get curves penalties sometimes even when the track is straight.
- Add: [NPF] Ships get a penalty for going over buoys now, so they will try to go around.
- Add: [NPF] Ships get a penalty for curves too, yay for straight lines.
- Add: TrackdirToTrack(), TrackToTrackdir(), IsDiagonalTrack() and IsDiagonalTrackdir() helper functions.
- Add: IsBuoy() and IsBuoyTile() helper functions.
- Codechange: Rearranged part of the control flow of ShipController(), removing a goto.
|
|
the day
|
|
and CmdRestoreOrderIndex():
- Check if the vehicle exists
- Check if the vehicle belongs to the correct player
- Check if the new order is valid (type, destination, flags) (CmdInsertOrder)
|
|
This should prevent trains, which are longer than the station, to turn around without stopping under certain circumstances and fix speed limit for trains entering a station, when realistic accerlation is used
|
|
called for CmdSkipOrder(). This also fixes the involuntary crash introduced 2 revisions ago
|
|
|
|
|
|
|
|
|
|
|
|
enter other players' depots. TODO
- Add: asserts to find the v->u.rail.track == 0 problem.
- Add: IsValidDepot(), IsValidTown(), IsValidSign(), IsValidVehicle(), IsValidStation()
- Add: GetTileOwner(), IsTileOwner()
- Codechange: Replaced IsShipDepotTile(), IsTrainDepotTile(), IsRoadDepotTile() by IsTileDepotType().
- Codechange: typedeffed the MAP_OWNERS as Owner. Should be used as variable type.
- Codechange: Replaced a few uint by TileIndex.
|
|
roadstops.
|
|
|
|
(and should be an uint16, not uint8)
|
|
- Supports trains, road vehicles and ships.
- Uses A* pathfinding (same codebase as the new ai).
- Currently unlimited search depth, so might perform badly on large maps/networks (especially ships).
- Will always find a route if there is one.
- Allows custom penalties for obstacles to be set in openttd.cfg (npf_ values).
- With NPF enabled, ships can have orders that are very far apart. Be careful, this will break (ships get lost) when the old pathfinder is used again.
- Feature: Disabling 90 degree turns for trains and ships.
- Requires NPF to be enabled.
- Ships and trains can no longer make weird 90 degree turns on tile borders.
- Codechange: Removed table/directions.h.
- table/directions.h contained ugly static tables but was included more than once. The tables, along with a few new ones are in npf.[ch] now. Better suggestions for a location?
- Fix: Binary heap in queue.c did not allocate enough space, resulting in a segfault.
- Codechange: Rewritten FindFirstBit2x64, added KillFirstBit2x64.
- Codechange: Introduced constant INVALID_TILE, to replace the usage of 0 as an invalid tile. Also replaces TILE_WRAPPED.
- Codechange: Moved TileAddWrap() to map.[ch]
- Add TileIndexDiffCByDir(), TileIndexDiffCByDir().
- Codechange: Moved IsTrainStationTile() to station.h
- Add: IsRoadStationTile() and GetRoadStationDir().
|
|
to 8) on
a single station.
Thanks to: Truelight for the saveload code, Darkvater and Hackykid for
network testing and Tron for proof-reading 1500 lines of diff.
|
|
appropriate warning flags in the Makefile
|
|
-Codechange: renamed all 'schedule' stuff to 'order(list)'
-Codechange: moved all order-stuff to order_cmd.c / order.h
-Codechange: vehicles that share orders are now linked to eachother
with next_shared/prev_shared in Vehicle
Developers: please use AssignOrder to assign data to an order. If not,
you _WILL_ make the save-routine to assert!
|
|
and _industries
(in prepare of dynamic arrays):
- DEREF_XXX is changed into GetXXX
- All direct call are directed via GetXXX
- struct Industry has now an index-field
- ENUM'd some stuff
- Replaced home built loops with FOR_ALL_XXX
- Added _stations_size, _vehicles_size, ... which gives the length of the
array (which will be dynamic in the near future)
- Changed lengtof(XXX) to _XXX_size (e.g. _stations_size)
- Removed all endof(XXX) (because mostly it was part of a FOR_ALL_XXX)
- Made the sort-functions of all 4 dynamic
- Made all 4 Initialize functions more of the same
- Some minor tab-fixing and stuff
(tnx to Tron for proof-reading my 100kb patch ;))
Note for all: please do NOT directly call _stations, _vehicles, _towns and
_industries, but use the right wrapper to access them. Thank you.
Ps: please also do not use 'v++', where v is of type Vehicle *.
|
|
|
|
|
|
GUI yet) (pasky)
|
|
|
|
Deterministic only at the moment, but random ones support shouldn't be that difficult now It doesn't do anything, but makes these actions actually possible (pasky).
|
|
sprite.h (pasky)
|
|
stored separately, making it possible to show different sprites in waypoint selection dialog (pasky).
|
|
|
|
not just the rendering data. This will be needed for variational stationspecs (pasky).
|
|
by dominik81 and pasky.
|
|
supported now and only
the first custom one can be placed (no selector GUI, coming soon). This
also moves some global variables to {struct GRFFile} and reorders which
actions are processed in what stage, to get it all working together --
(pasky)
|
|
DrawTileSeqStruct hacks needed for custom station supports (pasky)
|
|
-Fix: Correctly resorting vehicle list of player when the list of another player is open.
|
|
|
|
savegame version
|
