| Age | Commit message (Collapse) | Author |
|---|
|
It was a bit of a mixed bag. With this change, gfx.cpp is in
control who accesses _cur_palette from the video-drivers.
|
|
|
|
|
|
This allows drawing to happen while the GameLoop is doing an
iteration too.
Sadly, not much drawing currently can be done while the GameLoop
is running, as for example PollEvent() or UpdateWindows() can
influence the game-state. As such, they first need to acquire a
lock on the game-state before they can be called.
Currently, the main advantage is the time spend in Paint(), which
for non-OpenGL drivers can be a few milliseconds. For OpenGL this
is more like 0.05 milliseconds; in these instances this change
doesn't add any benefits for now.
This is an alternative to the former "draw-thread", which moved
the drawing in a thread for some OSes. It has similar performance
gain as this does, although this implementation allows for more
finer control over what suffers when the GameLoop takes too
long: drawing or the next GameLoop. For now they both suffer
equally.
|
|
Drawing in a thread is a bit odd, and often leads to surprising
issues. For example, OpenGL would only allow it if you move the
full context to the thread. Which is not always easily done on
all OSes.
In general, the advise is to handle system events and drawing
from the main thread, and do everything else in other threads.
So, let's be more like other games.
Additionally, putting the drawing routine in a thread was only
done for a few targets.
Upcoming commit will move the GameLoop in a thread, which will
work for all targets.
|
|
By default this setting is set to 2500% normal game speed.
|
|
|
|
Additionally, call it from the draw-tick.
|
|
They were all identical, so better put this in a single place
hoping it is less likely to break.
|
|
Additionally, make sure this is a class method. Later commits
will make use of this.
|
|
Also move this function to be a class member. This to allow
further deduplicating of code in a later commit.
|
|
|
|
|
|
shouldn't be closed yet
The higher your refresh-rate, the more likely this is. Mostly you
notice this when creating a new game or when abandoning a game.
This is a bit of a hack to keep the old behaviour, as before this
patch the game was already freezing your mouse while it was changing
game-mode, and it does this too after this patch. Just now it
freezes too a few frames earlier, to prevent not drawing windows
people still expect to see.
|
|
Most modern games run on 60 fps, and for good reason. This gives
a much smoother experiences.
As some people have monitors that can do 144Hz or even 240Hz, allow
people to configure the refresh rate. Of course, the higher you
set the value, the more time the game spends on drawing pixels
instead of simulating the game, which has an effect on simulation
speed.
The simulation will still always run at 33.33 fps, and is not
influences by this setting.
|
|
Sleep for 1ms (which is always (a lot) more than 1ms) is just
randomly guessing and hoping you hit your deadline, give or take.
But given we can calculate when our next frame is happening, we
can just sleep for that exact amount. As these values are often
a bit larger, it is also more likely the OS can schedule us back
in close to our requested target. This means it is more likely we
hit our deadlines, which makes the FPS a lot more stable.
|
|
Before, every next frame was calculated from the current time.
If for some reason the current frame was drifting a bit, the
next would too, and the next more, etc etc. This meant we rarely
hit the targets we would like, like 33.33fps.
Instead, allow video-drivers to drift slightly, and schedule the
next frame based on the time the last should have happened. Only
if the drift gets too much, that deadlines are missed for longer
period of times, schedule the next frame based on the current
time.
This makes the FPS a lot smoother, as sleeps aren't as exact as
you might think.
|
|
During fast-forward, the game was drawing as fast as it could. This
means that the fast-forward was limited also by how fast we could
draw, something that people in general don't expect.
To give an extreme case, if you are fully zoomed out on a busy
map, fast-forward would be mostly limited because of the time it
takes to draw the screen.
By decoupling the draw-tick and game-tick, we can keep the pace
of the draw-tick the same while speeding up the game-tick. To use
the extreme case as example again, if you are fully zoomed out
now, the screen only redraws 33.33 times per second, fast-forwarding
or not. This means fast-forward is much more likely to go at the
same speed, no matter what you are looking at.
|
|
_realtime_tick was reset every time the diff was calculated. This
means if it would trigger, say, every N.9 milliseconds, it would
after two iterations already drift a millisecond. This adds up
pretty quick.
|
|
On all OSes we tested the std::chrono::steady_clock is of a high
enough resolution to do millisecond measurements, which is all we
need.
By accident, this fixes a Win32 driver bug, where we would never
hit our targets, as the resolution of the clock was too low to
do accurate millisecond measurements with (it was ~16ms resolution
instead).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
In 10 years there was no active development on DOS. Although it
turned out to still work, the FPS was very bad. There is little
interest in the current community to look into this.
Further more, we like to switch to c++11 functions for threads,
which are not implemented by DJGPP, the only current compiler
for DOS.
Additionally, DOS is the only platform which does not support
networking. It is the reason we have tons of #ifdefs to support
disabling networking.
By removing DOS support, we can both use c++11 functions for threads,
and remove all the code related to disabling network. Sadly, this
means we have to see DOS go.
Of course, if you feel up for the task, simply revert this commit,
and implement stub c++11 functions for threads and stub functions
for networking. We are more than happy to accept such Pull Request.
|
|
Frame rate and various game loop/graphics timing measurements and graphs. Accessible via the Help menu, and can print some stats in the console via the fps command.
|
|
|
|
scrolled/jumped way to far, when OpenTTD lagged during mouse event processing.
|
|
|
|
"unsafe" functions to prevent them from being used, and thus having to care about certain aspects of their return values
|
|
|
|
keyboard handler.
|
|
Eagle_rainbow)
|
|
moving with the allegro video driver
|
|
blitter so changes of the palette data during the game don't influence drawing (with SDL)
|
|
dirty variables into a single structure
|
|
cursor more prominently during the initialisation of OpenTTD
|
|
|
|
it doesn't recompile everything that needs to be recompiled...
|
|
milliseconds per game tick and use it
|
|
|
|
|
|
missed :)
|
|
|
|
consisted of unrelated values use static const (u)int
|
|
if a header require a header make it include that header
|
