summaryrefslogtreecommitdiff
path: root/ship_cmd.c
AgeCommit message (Collapse)Author
2006-10-05(svn r6651) -Coding feature: added the windowevent WE_INVALIDATE_DATAbjarni
This gives the ability to invalidate some window data and recalculate as needed instead of doing it for each WE_PAINT This event is called right away when using InvalidateWindowData(), so it may be a good idea to set a bool or similar in the window or similar and then act on that bool in WE_PAINT instead of doing a lot of stuff in WE_INVALIDATE_DATA as it might be called more than once before WE_PAINT is called InvalidateWindowData() will not automatically repaint the window, so if you want to repaint it as well, you need to mark it dirty as well. Made the depot windows use WE_INVALIDATE_DATA to set when to generate the engine and wagon lists instead of at each redraw It makes no sense to regenerate the list when say using the scrollbar if we know that no vehicle have entered or left the list NOTE: currently there is a piece of code to generate the list when it's not needed and compare it to the stored list and assert if they mismatch This check is somewhat slow and kills the whole idea of WE_INVALIDATE_DATA, so it's a short lived one to verify that InvalidateWindowData() is used everywhere where it's needed
2006-10-04(svn r6637) -Codechange: merged all (vehicle type)EnterDepot into ↵bjarni
VehicleEnterDepot() This revealed duplicated code like aircraft lists got invalidated twice Moved invalidation of the vehicle detail window to VehicleServiceInDepot() as it should always be updated when serviced
2006-10-03(svn r6624) -Feature: added ability to add refit commands to vehicle orders ↵bjarni
(can only be done in goto depot orders) Example: make a train transport iron ore from A to B, then it visits a depot and refits to steel It then transport steel back to A or near A if there is a factory and then it visits another depot to refit to iron ore again This is controlled in the orders. If a goto depot order is lightlighted, then "Unload" changes to "Refit" Control click "Refit" removes the refit part of the order (as the tooltip says) The player will still pay the normal refit costs Known issues: If a vehicle is not in a depot, then the refit window will fail to tell refitted cargo capacity Refit costs in the refit window can sometimes print 0 when it should not because the refit calculation is unaware that the vehicle will be refitted in between Warning: autoreplace got a protection against replacing something so you get a new cargo type, but it can fail here. In the iron ore/steel example, it can see that the vehicle carries iron ore and the new one can be refitted to iron ore, then it will replace. It will not check to see that it's valid for steel as well. This is something to look into in the future
2006-09-27(svn r6532) - Feature: Add support for NewGRF sound effects. Currently sound ↵peter1138
priority isn't supported.
2006-09-08(svn r6424) -Codechange: [autoreplace] removed a loop though all vehicles ↵bjarni
from each time the window is redrawn To do this, the player struct contains an array, that contains the count of each engine type that the player owns Those arrays are updated each time a vehicle is build or deleted and is calculated on load (it's not saved) It's possible to access the arrays outside of the autoreplace GUI, so feel free to read from them in other patches as well
2006-09-05(svn r6406) -Codechange: Rename TileOffsByDir to TileOffsByDiagDir because ↵Darkvater
it accepts DiagDirections, and add TileOffsByDir that handles Directions. -Codechange: Make the treeloop use TileOffsByDir().
2006-09-04(svn r6378) -Codechange: Rename VLW_FLAGS to VLW_MASK as it is a maskDarkvater
2006-09-04(svn r6376) -Codechange: [vehicle refit] moved all refit cost calculations ↵bjarni
into GetRefitCost() Now it's possible to tell refit costs for an EngineID without actually having build a vehicle
2006-09-03(svn r6356) -Fix: FS#263 planes come out of hangar and drive back into hangarbjarni
Now all vehicles are serviced when it's time for service and they are in a depot This will avoid the goto depot order from ever showing up when in a depot
2006-09-03(svn r6353) -Codechange: Make DestinationID a typedef of uin16, which is as ↵tron
large as any type of destinataion (StationID, DepotID, WaypointID) it can hold DestinationID being a union of these types is just hassle without benefit and cannot be handled correctly everywhere because of local lack of information
2006-09-02(svn r6352) -Fix: FS#322 Send to depot bugbjarni
now vehicles can't be sent to a depot when they are already inside a depot before they would remember the order and try to turn around when leaving the depot
2006-09-02(svn r6304) -Codechange r6295: Use !! instead of (bool) in commands to send ↵bjarni
vehicles to depots
2006-09-01(svn r6295) -Feature: using goto depot with a different control selection ↵bjarni
will now alter the service/stopping in depot flag instead of cancelling the goto depot order
2006-09-01(svn r6291) -Feature: Vehicle lists from the station window now also got the ↵bjarni
goto depot button -Codechange: unified the code for mass goto depot to avoid duplicated code -Fix: Vehicles already on the way to depots will not be cancelled by mass goto depot (made it really hard to send all vehicles at once)
2006-08-30(svn r6246) -Feature: added the many times requested "send all vehicle to ↵bjarni
depot" button it's located in the vehicle list screen and does the same as in the shared orders window (send all vehicles in list to a depot) it will still not inform the player if a vehicle failed to find a depot, so don't take for granted that all of them go
2006-08-29(svn r6229) -Feature: Shared order lists now got a "goto depot" buttonbjarni
this will try to send all vehicles in the list to depots/hangars currently if one fails to find a depot, it will not tell the player
2006-08-27(svn r6165) -Feature: control click Goto Depot will now make the vehicle servicebjarni
at the depot and leave right away. To tell the difference the status of stopping vehicles will be in red, while servicing vehicles will be green. -Codechange: remove some dead code in CmdSendAircraftToHangar() since it is conflicting with new functionality. Now p2 means the same for all types
2006-08-26(svn r6142) -Codechange: added WaypointID (sorry DV, couldn't splits it anymore)truelight
-Codechange: introduced DestinationID, which is in fact an union of several types Used in Order struct, so no longer StationID is abused for all targets. Hangars are a big exception, as they use a station-id with GOTO_DEPOT (go figure)
2006-08-22(svn r6053) -Codechange: renamed all IsXXXIndex to IsValidXXXIDtruelight
-Codechange: IsValidXXXID now also checks if XXX is really valid, not if the number is within range Both changes again in preperation of the new mem-pool system, which requires this. IsValidXXXID is not a bit less pretty, but that will be cleaned up after the new mem-pool system
2006-08-22(svn r6052) -Codechange: change OrderType (order->type) in a typedeftruelight
-Codechange: renamed DeleteDestinationFromVehicleOrder to RemoveOrderFromAllVehicles to reflect his function better -Codechange: changed the params of RemoveOrderFromAllVehicles, to avoid unneeded variable-creation
2006-08-22(svn r6047) -Codechange: FOR_ALL now _only_ loops valid items, and skips ↵truelight
invalid ones -Codechange: use IsValidXXX where ever possible Note: both changes to prepare for new pool system, which needs those changes. For every pool there are 2 ugly lines, which will be removed when done implementing new pool system. Based on FS#13 by blathijs, partly implemented.
2006-08-22(svn r6045) -Cleanup: align all table-like structures using spaces, i.e. ↵rubidium
whitespace fixes only except for a few comments to make them uniform for the whole enum/struct.
2006-08-20(svn r6002) -Cleanup: remove the now redundant BASE_YEAR constant.rubidium
2006-08-16(svn r5926) -Codechange: make _cur_year contain the full year, instead of ↵rubidium
the offset since 1920 -Codechange: store all year related variables that are _not_ stored in a savegame/transported over the network in the same format as _cur_year
2006-08-14(svn r5887) -Cleanup: move date related functions, defines and variables to ↵rubidium
date.[ch] -Cleanup: fix whitespace related coding style issues in date.[ch] -Cleanup: make original comments doxygen compatible and remove/change outdated comments
2006-08-09(svn r5822) - NewGRF: add support for callback 31, vehicle start/stop check. ↵peter1138
This allows a set to disallow a vehicle from being started, i.e. to not be able to leave the depot. This is almost a partner to callback 1D.
2006-08-09(svn r5819) - NewGRF: add support for refit costs specified in NewGRF. This ↵peter1138
may affect the default refit costs for the default rail vehicles.
2006-06-29(svn r5427) - Codechange: testing for "== true" is redundant.peter1138
2006-06-09(svn r5188) - NewGRF: check refit capacity callback when refitting a shippeter1138
2006-06-05(svn r5120) Add IsShipInDepot{Stopped,}() and remove some redundant checkstron
2006-06-04(svn r5104) - When refitting a vehicle to its existing cargo type, don't ↵peter1138
lose the cargo onboard (useful when adding wagons to a train)
2006-06-04(svn r5103) - Add cargo subtype parameter to refit commands (mart3p)peter1138
2006-06-04(svn r5094) Remove _new_{aircraft,roadveh,ship,train,wagon}_id. ↵tron
_new_vehicle_id is enough.
2006-06-04(svn r5093) -CodeChange: [YAPF] min. debug level changed from 1 to 3 and 4 ↵KUDr
for frequent debug messages (performance stats)
2006-05-27(svn r4987) Feature: Merged YAPF into trunk. Thanks to devs for continuous ↵KUDr
support and users for testing.
2006-05-19(svn r4910) - NewGRF: add and initialize cargo subtype for vehicle visual ↵peter1138
variations
2006-05-11(svn r4826) -Fix: [autoreplace] fixed possible problem when autoreplacing ↵bjarni
and was number of vehicles (of a type, not total) was reached now the new vehicle gets the same number as the old one, completely removing the problem where we could run out of numbers since we don't have to find free numbers for the new vehicles, autoreplace should be somewhat faster, specially in late games NOTE: in CmdBuildRailVehicle(), bit 0 and 1 in p2 have been switched to make the meaning of bit 0 consistent with the other build commands. CmdCloneVehicle() is modified to follow this as well
2006-04-23(svn r4554) Replace magic numbers by TILE_{HEIGHT,SIZE}tron
2006-04-21(svn r4505) -Fix (FS#94) Ships can now be used to set up feeders as well.celestar
2006-04-10(svn r4342) Change the first two parameters of commands - virtual pixel ↵tron
coordinates of the tile to operate on - to a TileIndex Remove DoCommandByTile(), because now it does the same as DoCommand()
2006-04-08(svn r4321) For ships check the ship state, not the road state. This bug was ↵tron
harmless, because both states are at the same byte in the vehicle type specific union.
2006-04-07(svn r4317) -Codechange: More map accessors for ship_cmd. it is now ↵celestar
map-access free, but still requires a huge cleanup
2006-04-05(svn r4289) -Codechange: Make use of water_map accessors for ships. Make a ↵celestar
mental note to clean ship_cmd
2006-04-04(svn r4272) -Codechange: Moved the map-accessing stuff from station.h into ↵celestar
station_map.h
2006-04-03(svn r4246) -Codechange. Replaced about 100 occurences of '16' by TILE_SIZEcelestar
2006-03-12(svn r3832) Replace some magic numbers by (Diag)Direction enumstron
2006-03-08(svn r3783) Replace further ints and magic numbers by Direction, ↵tron
DiagDirection and friends
2006-03-05(svn r3767) Move all direction related enums and functions to a separate headertron
2006-03-04(svn r3758) Remove the news validation callback. It is superseded by r3757.tron
2006-03-04(svn r3757) -Feature: Delete news items about vehicles, when they get staletron
This is used to delete - all news about a vehicle, when it gets deleted - "vehicle has stopped in depot" news, when it gets started - "vehicle has invalid orders" news, when the orders get changed