diff options
Diffstat (limited to 'src/rail.h')
-rw-r--r-- | src/rail.h | 625 |
1 files changed, 2 insertions, 623 deletions
diff --git a/src/rail.h b/src/rail.h index 30d7e7e4e..8b5848bc4 100644 --- a/src/rail.h +++ b/src/rail.h @@ -6,200 +6,11 @@ #define RAIL_H #include "gfx.h" -#include "direction_func.h" +#include "rail_type.h" +#include "track_type.h" #include "tile.h" #include "variables.h" -/** - * Enumeration for all possible railtypes. - * - * This enumeration defines all 4 possible railtypes. - */ -enum RailType { - RAILTYPE_BEGIN = 0, ///< Used for iterations - RAILTYPE_RAIL = 0, ///< Standard non-electric rails - RAILTYPE_ELECTRIC = 1, ///< Electric rails - RAILTYPE_MONO = 2, ///< Monorail - RAILTYPE_MAGLEV = 3, ///< Maglev - RAILTYPE_END, ///< Used for iterations - INVALID_RAILTYPE = 0xFF ///< Flag for invalid railtype -}; - -typedef byte RailTypeMask; - -/** Allow incrementing of Track variables */ -DECLARE_POSTFIX_INCREMENT(RailType); -/** Define basic enum properties */ -template <> struct EnumPropsT<RailType> : MakeEnumPropsT<RailType, byte, RAILTYPE_BEGIN, RAILTYPE_END, INVALID_RAILTYPE> {}; -typedef TinyEnumT<RailType> RailTypeByte; - - -/** - * These are used to specify a single track. - * Can be translated to a trackbit with TrackToTrackbit - */ -enum Track { - TRACK_BEGIN = 0, ///< Used for iterations - TRACK_X = 0, ///< Track along the x-axis (north-east to south-west) - TRACK_Y = 1, ///< Track along the y-axis (north-west to south-east) - TRACK_UPPER = 2, ///< Track in the upper corner of the tile (north) - TRACK_LOWER = 3, ///< Track in the lower corner of the tile (south) - TRACK_LEFT = 4, ///< Track in the left corner of the tile (west) - TRACK_RIGHT = 5, ///< Track in the right corner of the tile (east) - TRACK_END, ///< Used for iterations - INVALID_TRACK = 0xFF ///< Flag for an invalid track -}; - -/** Allow incrementing of Track variables */ -DECLARE_POSTFIX_INCREMENT(Track); -/** Define basic enum properties */ -template <> struct EnumPropsT<Track> : MakeEnumPropsT<Track, byte, TRACK_BEGIN, TRACK_END, INVALID_TRACK> {}; -typedef TinyEnumT<Track> TrackByte; - - -/** - * Convert an Axis to the corresponding Track - * AXIS_X -> TRACK_X - * AXIS_Y -> TRACK_Y - * Uses the fact that they share the same internal encoding - * - * @param a the axis to convert - * @return the track corresponding to the axis - */ -static inline Track AxisToTrack(Axis a) -{ - return (Track)a; -} - - -/** Bitfield corresponding to Track */ -enum TrackBits { - TRACK_BIT_NONE = 0U, ///< No track - TRACK_BIT_X = 1U << TRACK_X, ///< X-axis track - TRACK_BIT_Y = 1U << TRACK_Y, ///< Y-axis track - TRACK_BIT_UPPER = 1U << TRACK_UPPER, ///< Upper track - TRACK_BIT_LOWER = 1U << TRACK_LOWER, ///< Lower track - TRACK_BIT_LEFT = 1U << TRACK_LEFT, ///< Left track - TRACK_BIT_RIGHT = 1U << TRACK_RIGHT, ///< Right track - TRACK_BIT_CROSS = TRACK_BIT_X | TRACK_BIT_Y, ///< X-Y-axis cross - TRACK_BIT_HORZ = TRACK_BIT_UPPER | TRACK_BIT_LOWER, ///< Upper and lower track - TRACK_BIT_VERT = TRACK_BIT_LEFT | TRACK_BIT_RIGHT, ///< Left and right track - TRACK_BIT_3WAY_NE = TRACK_BIT_X | TRACK_BIT_UPPER | TRACK_BIT_RIGHT,///< "Arrow" to the north-east - TRACK_BIT_3WAY_SE = TRACK_BIT_Y | TRACK_BIT_LOWER | TRACK_BIT_RIGHT,///< "Arrow" to the south-east - TRACK_BIT_3WAY_SW = TRACK_BIT_X | TRACK_BIT_LOWER | TRACK_BIT_LEFT, ///< "Arrow" to the south-west - TRACK_BIT_3WAY_NW = TRACK_BIT_Y | TRACK_BIT_UPPER | TRACK_BIT_LEFT, ///< "Arrow" to the north-west - TRACK_BIT_ALL = TRACK_BIT_CROSS | TRACK_BIT_HORZ | TRACK_BIT_VERT, ///< All possible tracks - TRACK_BIT_MASK = 0x3FU, ///< Bitmask for the first 6 bits - TRACK_BIT_WORMHOLE = 0x40U, ///< Bitflag for a wormhole (used for tunnels) - TRACK_BIT_DEPOT = 0x80U, ///< Bitflag for a depot - INVALID_TRACK_BIT = 0xFF ///< Flag for an invalid trackbits value -}; - -/** Define basic enum properties */ -template <> struct EnumPropsT<TrackBits> : MakeEnumPropsT<TrackBits, byte, TRACK_BIT_NONE, TRACK_BIT_ALL, INVALID_TRACK_BIT> {}; -typedef TinyEnumT<TrackBits> TrackBitsByte; - -DECLARE_ENUM_AS_BIT_SET(TrackBits); - -/** - * Maps a Track to the corresponding TrackBits value - * @param track the track to convert - * @return the converted TrackBits value of the track - */ -static inline TrackBits TrackToTrackBits(Track track) -{ - return (TrackBits)(1 << track); -} - -/** - * Maps an Axis to the corresponding TrackBits value - * @param a the axis to convert - * @return the converted TrackBits value of the axis - */ -static inline TrackBits AxisToTrackBits(Axis a) -{ - return TrackToTrackBits(AxisToTrack(a)); -} - -/** - * Returns a single horizontal/vertical trackbit, that is in a specific tile corner. - * - * @param corner The corner of a tile. - * @return The TrackBits of the track in the corner. - */ -static inline TrackBits CornerToTrackBits(Corner corner) -{ - extern const TrackBits _corner_to_trackbits[]; - assert(IsValidCorner(corner)); - return _corner_to_trackbits[corner]; -} - - -/** - * Enumeration for tracks and directions. - * - * These are a combination of tracks and directions. Values are 0-5 in one - * direction (corresponding to the Track enum) and 8-13 in the other direction. - * 6, 7, 14 and 15 are used to encode the reversing of road vehicles. Those - * reversing track dirs are not considered to be 'valid' except in a small - * corner in the road vehicle controller. - */ -enum Trackdir { - TRACKDIR_BEGIN = 0, ///< Used for iterations - TRACKDIR_X_NE = 0, ///< X-axis and direction to north-east - TRACKDIR_Y_SE = 1, ///< Y-axis and direction to south-east - TRACKDIR_UPPER_E = 2, ///< Upper track and direction to east - TRACKDIR_LOWER_E = 3, ///< Lower track and direction to east - TRACKDIR_LEFT_S = 4, ///< Left track and direction to south - TRACKDIR_RIGHT_S = 5, ///< Right track and direction to south - TRACKDIR_RVREV_NE = 6, ///< (Road vehicle) reverse direction north-east - TRACKDIR_RVREV_SE = 7, ///< (Road vehicle) reverse direction south-east - TRACKDIR_X_SW = 8, ///< X-axis and direction to south-west - TRACKDIR_Y_NW = 9, ///< Y-axis and direction to north-west - TRACKDIR_UPPER_W = 10, ///< Upper track and direction to west - TRACKDIR_LOWER_W = 11, ///< Lower track and direction to west - TRACKDIR_LEFT_N = 12, ///< Left track and direction to north - TRACKDIR_RIGHT_N = 13, ///< Right track and direction to north - TRACKDIR_RVREV_SW = 14, ///< (Road vehicle) reverse direction south-west - TRACKDIR_RVREV_NW = 15, ///< (Road vehicle) reverse direction north-west - TRACKDIR_END, ///< Used for iterations - INVALID_TRACKDIR = 0xFF, ///< Flag for an invalid trackdir -}; - -/** Define basic enum properties */ -template <> struct EnumPropsT<Trackdir> : MakeEnumPropsT<Trackdir, byte, TRACKDIR_BEGIN, TRACKDIR_END, INVALID_TRACKDIR> {}; -typedef TinyEnumT<Trackdir> TrackdirByte; - -/** - * Enumeration of bitmasks for the TrackDirs - * - * These are a combination of tracks and directions. Values are 0-5 in one - * direction (corresponding to the Track enum) and 8-13 in the other direction. - */ -enum TrackdirBits { - TRACKDIR_BIT_NONE = 0x0000, ///< No track build - TRACKDIR_BIT_X_NE = 0x0001, ///< Track x-axis, direction north-east - TRACKDIR_BIT_Y_SE = 0x0002, ///< Track y-axis, direction south-east - TRACKDIR_BIT_UPPER_E = 0x0004, ///< Track upper, direction east - TRACKDIR_BIT_LOWER_E = 0x0008, ///< Track lower, direction east - TRACKDIR_BIT_LEFT_S = 0x0010, ///< Track left, direction south - TRACKDIR_BIT_RIGHT_S = 0x0020, ///< Track right, direction south - /* Again, note the two missing values here. This enables trackdir -> track conversion by doing (trackdir & 0xFF) */ - TRACKDIR_BIT_X_SW = 0x0100, ///< Track x-axis, direction south-west - TRACKDIR_BIT_Y_NW = 0x0200, ///< Track y-axis, direction north-west - TRACKDIR_BIT_UPPER_W = 0x0400, ///< Track upper, direction west - TRACKDIR_BIT_LOWER_W = 0x0800, ///< Track lower, direction west - TRACKDIR_BIT_LEFT_N = 0x1000, ///< Track left, direction north - TRACKDIR_BIT_RIGHT_N = 0x2000, ///< Track right, direction north - TRACKDIR_BIT_MASK = 0x3F3F, ///< Bitmask for bit-operations - INVALID_TRACKDIR_BIT = 0xFFFF, ///< Flag for an invalid trackdirbit value -}; - -/** Define basic enum properties */ -template <> struct EnumPropsT<TrackdirBits> : MakeEnumPropsT<TrackdirBits, uint16, TRACKDIR_BIT_NONE, TRACKDIR_BIT_MASK, INVALID_TRACKDIR_BIT> {}; -typedef TinyEnumT<TrackdirBits> TrackdirBitsShort; -DECLARE_ENUM_AS_BIT_SET(TrackdirBits); - /** This struct contains all the info that is needed to draw and construct tracks. */ struct RailtypeInfo { @@ -284,138 +95,6 @@ enum { NUM_SSD_STACK = 32, ///< max amount of blocks to check recursively }; -/** - * Maps a Trackdir to the corresponding TrackdirBits value - * @param trackdir the track direction to convert - * @return the converted TrackdirBits value - */ -static inline TrackdirBits TrackdirToTrackdirBits(Trackdir trackdir) -{ - return (TrackdirBits)(1 << trackdir); -} - -/** - * Removes first Track from TrackBits and returns it - * - * This function searchs for the first bit in the TrackBits, - * remove this bit from the parameter and returns the found - * bit as Track value. It returns INVALID_TRACK if the - * parameter was TRACK_BIT_NONE or INVALID_TRACK_BIT. This - * is basically used in while-loops to get up to 6 possible - * tracks on a tile until the parameter becomes TRACK_BIT_NONE. - * - * @param tracks The value with the TrackBits - * @return The first Track from the TrackBits value - * @see FindFirstTrack - */ -static inline Track RemoveFirstTrack(TrackBits *tracks) -{ - if (*tracks != TRACK_BIT_NONE && *tracks != INVALID_TRACK_BIT) { - Track first = (Track)FIND_FIRST_BIT(*tracks); - ClrBit(*tracks, first); - return first; - } - return INVALID_TRACK; -} - -/** - * Removes first Trackdir from TrackdirBits and returns it - * - * This function searchs for the first bit in the TrackdirBits parameter, - * remove this bit from the parameter and returns the fnound bit as - * Trackdir value. It returns INVALID_TRACKDIR if the trackdirs is - * TRACKDIR_BIT_NONE or INVALID_TRACKDIR_BIT. This is basically used in a - * while-loop to get all track-directions step by step until the value - * reaches TRACKDIR_BIT_NONE. - * - * @param trackdirs The value with the TrackdirBits - * @return The first Trackdir from the TrackdirBits value - * @see FindFirstTrackdir - */ -static inline Trackdir RemoveFirstTrackdir(TrackdirBits *trackdirs) -{ - if (*trackdirs != TRACKDIR_BIT_NONE && *trackdirs != INVALID_TRACKDIR_BIT) { - Trackdir first = (Trackdir)FindFirstBit2x64(*trackdirs); - ClrBit(*trackdirs, first); - return first; - } - return INVALID_TRACKDIR; -} - -/** - * Returns first Track from TrackBits or INVALID_TRACK - * - * This function returns the first Track found in the TrackBits value as Track-value. - * It returns INVALID_TRACK if the parameter is TRACK_BIT_NONE or INVALID_TRACK_BIT. - * - * @param tracks The TrackBits value - * @return The first Track found or INVALID_TRACK - * @see RemoveFirstTrack - */ -static inline Track FindFirstTrack(TrackBits tracks) -{ - return (tracks != TRACK_BIT_NONE && tracks != INVALID_TRACK_BIT) ? (Track)FIND_FIRST_BIT(tracks) : INVALID_TRACK; -} - -/** - * Converts TrackBits to Track. - * - * This function converts a TrackBits value to a Track value. As it - * is not possible to convert two or more tracks to one track the - * parameter must contain only one track or be the INVALID_TRACK_BIT value. - * - * @param tracks The TrackBits value to convert - * @return The Track from the value or INVALID_TRACK - * @pre tracks must contains only one Track or be INVALID_TRACK_BIT - */ -static inline Track TrackBitsToTrack(TrackBits tracks) -{ - assert(tracks == INVALID_TRACK_BIT || (tracks != TRACK_BIT_NONE && KillFirstBit(tracks & TRACK_BIT_MASK) == TRACK_BIT_NONE)); - return tracks != INVALID_TRACK_BIT ? (Track)FIND_FIRST_BIT(tracks & TRACK_BIT_MASK) : INVALID_TRACK; -} - -/** - * Returns first Trackdir from TrackdirBits or INVALID_TRACKDIR - * - * This function returns the first Trackdir in the given TrackdirBits value or - * INVALID_TRACKDIR if the value is TRACKDIR_BIT_NONE. The TrackdirBits must - * not be INVALID_TRACKDIR_BIT. - * - * @param trackdirs The TrackdirBits value - * @return The first Trackdir from the TrackdirBits or INVALID_TRACKDIR on TRACKDIR_BIT_NONE. - * @pre trackdirs must not be INVALID_TRACKDIR_BIT - * @see RemoveFirstTrackdir - */ -static inline Trackdir FindFirstTrackdir(TrackdirBits trackdirs) -{ - assert((trackdirs & ~TRACKDIR_BIT_MASK) == TRACKDIR_BIT_NONE); - return (trackdirs != TRACKDIR_BIT_NONE) ? (Trackdir)FindFirstBit2x64(trackdirs) : INVALID_TRACKDIR; -} - -/** - * Checks if a Track is valid. - * - * @param track The value to check - * @return true if the given value is a valid track. - * @note Use this in an assert() - */ -static inline bool IsValidTrack(Track track) -{ - return track < TRACK_END; -} - -/** - * Checks if a Trackdir is valid. - * - * @param trackdir The value to check - * @return true if the given valie is a valid Trackdir - * @note Use this in an assert() - */ -static inline bool IsValidTrackdir(Trackdir trackdir) -{ - return (TrackdirToTrackdirBits(trackdir) & TRACKDIR_BIT_MASK) != 0; -} - /* * Functions to map tracks to the corresponding bits in the signal * presence/status bytes in the map. You should not use these directly, but @@ -453,289 +132,6 @@ static inline byte SignalOnTrack(Track track) } -/* - * Functions describing logical relations between Tracks, TrackBits, Trackdirs - * TrackdirBits, Direction and DiagDirections. - */ - -/** - * Maps a trackdir to the reverse trackdir. - * - * Returns the reverse trackdir of a Trackdir value. The reverse trackdir - * is the same track with the other direction on it. - * - * @param trackdir The Trackdir value - * @return The reverse trackdir - * @pre trackdir must not be INVALID_TRACKDIR - */ -static inline Trackdir ReverseTrackdir(Trackdir trackdir) -{ - assert(trackdir != INVALID_TRACKDIR); - return (Trackdir)(trackdir ^ 8); -} - -/** - * Returns the Track that a given Trackdir represents - * - * This function filters the Track which is used in the Trackdir value and - * returns it as a Track value. - * - * @param trackdir The trackdir value - * @return The Track which is used in the value - */ -static inline Track TrackdirToTrack(Trackdir trackdir) -{ - return (Track)(trackdir & 0x7); -} - -/** - * Returns a Trackdir for the given Track - * - * Since every Track corresponds to two Trackdirs, we choose the - * one which points between NE and S. Note that the actual - * implementation is quite futile, but this might change - * in the future. - * - * @param track The given Track - * @return The Trackdir from the given Track - */ -static inline Trackdir TrackToTrackdir(Track track) -{ - return (Trackdir)track; -} - -/** - * Returns a TrackdirBit mask from a given Track - * - * The TrackdirBit mask contains the two TrackdirBits that - * correspond with the given Track (one for each direction). - * - * @param track The track to get the TrackdirBits from - * @return The TrackdirBits which the selected tracks - */ -static inline TrackdirBits TrackToTrackdirBits(Track track) -{ - Trackdir td = TrackToTrackdir(track); - return (TrackdirBits)(TrackdirToTrackdirBits(td) | TrackdirToTrackdirBits(ReverseTrackdir(td))); -} - -/** - * Discards all directional information from a TrackdirBits value - * - * Any Track which is present in either direction will be present in the result. - * - * @param bits The TrackdirBits to get the TrackBits from - * @return The TrackBits - */ -static inline TrackBits TrackdirBitsToTrackBits(TrackdirBits bits) -{ - return (TrackBits)((bits | (bits >> 8)) & TRACK_BIT_MASK); -} - -/** - * Maps a trackdir to the trackdir that you will end up on if you go straight - * ahead. - * - * This will be the same trackdir for diagonal trackdirs, but a - * different (alternating) one for straight trackdirs - * - * @param trackdir The given trackdir - * @return The next Trackdir value of the next tile. - */ -static inline Trackdir NextTrackdir(Trackdir trackdir) -{ - extern const Trackdir _next_trackdir[TRACKDIR_END]; - return _next_trackdir[trackdir]; -} - -/** - * Maps a track to all tracks that make 90 deg turns with it. - * - * For the diagonal directions these are the complement of the - * direction, for the straight directions these are the - * two vertical or horizontal tracks, depend on the given direction - * - * @param track The given track - * @return The TrackBits with the tracks marked which cross the given track by 90 deg. - */ -static inline TrackBits TrackCrossesTracks(Track track) -{ - extern const TrackBits _track_crosses_tracks[TRACK_END]; - return _track_crosses_tracks[track]; -} - -/** - * Maps a trackdir to the (4-way) direction the tile is exited when following - * that trackdir. - * - * For the diagonal directions these are the same directions. For - * the straight directions these are the directions from the imagined - * base-tile to the bordering tile which will be joined if the given - * straight direction is leaved from the base-tile. - * - * @param trackdir The given track direction - * @return The direction which points to the resulting tile if following the Trackdir - */ -static inline DiagDirection TrackdirToExitdir(Trackdir trackdir) -{ - extern const DiagDirection _trackdir_to_exitdir[TRACKDIR_END]; - return _trackdir_to_exitdir[trackdir]; -} - -/** - * Maps a track and an (4-way) dir to the trackdir that represents the track - * with the exit in the given direction. - * - * For the diagonal tracks the resulting track direction are clear for a given - * DiagDirection. It either matches the direction or it returns INVALID_TRACKDIR, - * as a TRACK_X cannot be applied with DIAG_SE. - * For the straight tracks the resulting track direction will be the - * direction which the DiagDirection is pointing. But this will be INVALID_TRACKDIR - * if the DiagDirection is pointing 'away' the track. - * - * @param track The track to applie an direction on - * @param diagdir The DiagDirection to applie on - * @return The resulting track direction or INVALID_TRACKDIR if not possible. - */ -static inline Trackdir TrackExitdirToTrackdir(Track track, DiagDirection diagdir) -{ - extern const Trackdir _track_exitdir_to_trackdir[TRACK_END][DIAGDIR_END]; - return _track_exitdir_to_trackdir[track][diagdir]; -} - -/** - * Maps a track and an (4-way) dir to the trackdir that represents the track - * with the entry in the given direction. - * - * For the diagonal tracks the return value is clear, its either the matching - * track direction or INVALID_TRACKDIR. - * For the straight tracks this returns the track direction which results if - * you follow the DiagDirection and then turn by 45 deg left or right on the - * next tile. The new direction on the new track will be the returning Trackdir - * value. If the parameters makes no sense like the track TRACK_UPPER and the - * diraction DIAGDIR_NE (target track cannot be reached) this function returns - * INVALID_TRACKDIR. - * - * @param track The target track - * @param diagdir The direction to "come from" - * @return the resulting Trackdir or INVALID_TRACKDIR if not possible. - */ -static inline Trackdir TrackEnterdirToTrackdir(Track track, DiagDirection diagdir) -{ - extern const Trackdir _track_enterdir_to_trackdir[TRACK_END][DIAGDIR_END]; - return _track_enterdir_to_trackdir[track][diagdir]; -} - -/** - * Maps a track and a full (8-way) direction to the trackdir that represents - * the track running in the given direction. - */ -static inline Trackdir TrackDirectionToTrackdir(Track track, Direction dir) -{ - extern const Trackdir _track_direction_to_trackdir[TRACK_END][DIR_END]; - return _track_direction_to_trackdir[track][dir]; -} - -/** - * Maps a (4-way) direction to the diagonal trackdir that runs in that - * direction. - * - * @param diagdir The direction - * @return The resulting Trackdir direction - */ -static inline Trackdir DiagdirToDiagTrackdir(DiagDirection diagdir) -{ - extern const Trackdir _dir_to_diag_trackdir[DIAGDIR_END]; - return _dir_to_diag_trackdir[diagdir]; -} - -/** - * Returns all trackdirs that can be reached when entering a tile from a given - * (diagonal) direction. - * - * This will obviously include 90 degree turns, since no information is available - * about the exact angle of entering - * - * @param diagdir The joining direction - * @return The TrackdirBits which can be used from the given direction - * @see DiagdirReachesTracks - */ -static inline TrackdirBits DiagdirReachesTrackdirs(DiagDirection diagdir) -{ - extern const TrackdirBits _exitdir_reaches_trackdirs[DIAGDIR_END]; - return _exitdir_reaches_trackdirs[diagdir]; -} - -/** - * Returns all tracks that can be reached when entering a tile from a given - * (diagonal) direction. - * - * This will obviously include 90 degree turns, since no - * information is available about the exact angle of entering - * - * @param diagdir The joining irection - * @return The tracks which can be used - * @see DiagdirReachesTrackdirs - */ -static inline TrackBits DiagdirReachesTracks(DiagDirection diagdir) { return TrackdirBitsToTrackBits(DiagdirReachesTrackdirs(diagdir)); } - -/** - * Maps a trackdir to the trackdirs that can be reached from it (ie, when - * entering the next tile. - * - * This will include 90 degree turns! - * - * @param trackdir The track direction which will be leaved - * @return The track directions which can be used from this direction (in the next tile) - */ -static inline TrackdirBits TrackdirReachesTrackdirs(Trackdir trackdir) -{ - extern const TrackdirBits _exitdir_reaches_trackdirs[DIAGDIR_END]; - return _exitdir_reaches_trackdirs[TrackdirToExitdir(trackdir)]; -} -/* Note that there is no direct table for this function (there used to be), - * but it uses two simpeler tables to achieve the result */ - -/** - * Maps a trackdir to all trackdirs that make 90 deg turns with it. - * - * For the diagonal tracks this returns the track direction bits - * of the other axis in both directions, which cannot be joined by - * the given track direction. - * For the straight tracks this returns all possible 90 deg turns - * either on the current tile (which no train can joined) or on the - * bordering tiles. - * - * @param trackdir The track direction - * @return The TrackdirBits which are (more or less) 90 deg turns. - */ -static inline TrackdirBits TrackdirCrossesTrackdirs(Trackdir trackdir) -{ - extern const TrackdirBits _track_crosses_trackdirs[TRACKDIR_END]; - return _track_crosses_trackdirs[TrackdirToTrack(trackdir)]; -} - -/** - * Checks if a given Track is diagonal - * - * @param track The given track to check - * @return true if diagonal, else false - */ -static inline bool IsDiagonalTrack(Track track) -{ - return (track == TRACK_X) || (track == TRACK_Y); -} - -/** - * Checks if a given Trackdir is diagonal. - * - * @param trackdir The given trackdir - * @return true if the trackdir use a diagonal track - */ -static inline bool IsDiagonalTrackdir(Trackdir trackdir) -{ - return IsDiagonalTrack(TrackdirToTrack(trackdir)); -} /** * Returns a pointer to the Railtype information for a given railtype @@ -775,23 +171,6 @@ static inline bool HasPowerOnRail(RailType enginetype, RailType tiletype) return HasBit(GetRailTypeInfo(enginetype)->powered_railtypes, tiletype); } -/** - * Checks if the given tracks overlap, ie form a crossing. Basically this - * means when there is more than one track on the tile, exept when there are - * two parallel tracks. - * @param bits The tracks present. - * @return Whether the tracks present overlap in any way. - */ -static inline bool TracksOverlap(TrackBits bits) -{ - /* With no, or only one track, there is no overlap */ - if (bits == TRACK_BIT_NONE || KillFirstBit(bits) == TRACK_BIT_NONE) return false; - /* We know that there are at least two tracks present. When there are more - * than 2 tracks, they will surely overlap. When there are two, they will - * always overlap unless they are lower & upper or right & left. */ - return bits != TRACK_BIT_HORZ && bits != TRACK_BIT_VERT; -} - extern int _railtype_cost_multiplier[RAILTYPE_END]; extern const int _default_railtype_cost_multiplier[RAILTYPE_END]; |