summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--elrail.c115
-rw-r--r--table/elrail_data.h12
2 files changed, 55 insertions, 72 deletions
diff --git a/elrail.c b/elrail.c
index ef0a44cbe..02a557e5f 100644
--- a/elrail.c
+++ b/elrail.c
@@ -115,9 +115,30 @@ static TrackBits GetRailTrackBitsUniversal(TileIndex t, byte *override)
}
}
+/** Corrects the tileh for certain tile types. Returns an effective tileh for the track on the tile.
+ * @param tile The tile to analyse
+ * @param *tileh the tileh
+ */
+static void AdjustTileh(TileIndex tile, uint *tileh)
+{
+ if (IsTunnelTile(tile)) *tileh = 0;
+ if (IsBridgeTile(tile) && IsBridgeRamp(tile)) {
+ if (*tileh != 0) {
+ *tileh = 0;
+ } else {
+ switch (GetBridgeRampDirection(tile)) {
+ case DIAGDIR_NE: *tileh = 12; break;
+ case DIAGDIR_SE: *tileh = 6; break;
+ case DIAGDIR_SW: *tileh = 3; break;
+ case DIAGDIR_NW: *tileh = 9; break;
+ default: break;
+ }
+ }
+ }
+}
+
/** Draws wires and, if required, pylons on a given tile
* @param ti The Tileinfo to draw the tile for
- * @todo Currently, each pylon is drawn twice (once for each neighbouring tiles use OwnedPPPonPCP for this)
*/
static void DrawCatenaryRailway(const TileInfo *ti)
{
@@ -127,26 +148,16 @@ static void DrawCatenaryRailway(const TileInfo *ti)
TrackBits trackconfig[TS_END];
bool isflat[TS_END];
/* Note that ti->tileh has already been adjusted for Foundations */
- uint tileh[TS_END];
+ uint tileh[TS_END] = {ti->tileh, 0};
TLG tlg = GetTLG(ti->tile);
byte PCPstatus = 0;
byte OverridePCP = 0;
byte PPPpreferred[DIAGDIR_END];
byte PPPallowed[DIAGDIR_END];
- byte PPPbuffer[DIAGDIR_END];
DiagDirection i;
Track t;
- tileh[0] = ti->tileh;
- tileh[1] = 0;
-
- PPPpreferred[0] = PPPpreferred[1] = PPPpreferred[2] = PPPpreferred[3] = 0xFF;
- PPPallowed[0] = AllowedPPPonPCP[0];
- PPPallowed[1] = AllowedPPPonPCP[1];
- PPPallowed[2] = AllowedPPPonPCP[2];
- PPPallowed[3] = AllowedPPPonPCP[3];
-
/* Find which rail bits are present, and select the override points.
We don't draw a pylon:
1) INSIDE a tunnel (we wouldn't see it anyway)
@@ -157,20 +168,7 @@ static void DrawCatenaryRailway(const TileInfo *ti)
/* If a track bit is present that is not in the main direction, the track is level */
isflat[TS_HOME] = trackconfig[TS_HOME] & (TRACK_BIT_UPPER | TRACK_BIT_LOWER | TRACK_BIT_LEFT | TRACK_BIT_RIGHT);
- if (IsTunnelTile(ti->tile)) tileh[TS_HOME] = 0;
- if (IsBridgeTile(ti->tile) && IsBridgeRamp(ti->tile)) {
- if (tileh[TS_HOME] != 0) {
- tileh[TS_HOME] = 0;
- } else {
- switch (GetBridgeRampDirection(ti->tile)) {
- case DIAGDIR_NE: tileh[TS_HOME] = 12; break;
- case DIAGDIR_SE: tileh[TS_HOME] = 6; break;
- case DIAGDIR_SW: tileh[TS_HOME] = 3; break;
- case DIAGDIR_NW: tileh[TS_HOME] = 9; break;
- default: break;
- }
- }
- }
+ AdjustTileh(ti->tile, &tileh[TS_HOME]);
for (i = DIAGDIR_NE; i < DIAGDIR_END; i++) {
TileIndex neighbour = ti->tile + TileOffsByDir(i);
@@ -183,21 +181,28 @@ static void DrawCatenaryRailway(const TileInfo *ti)
trackconfig[TS_NEIGHBOUR] = GetRailTrackBitsUniversal(neighbour, NULL);
isflat[TS_NEIGHBOUR] = trackconfig[TS_NEIGHBOUR] & (TRACK_BIT_UPPER | TRACK_BIT_LOWER | TRACK_BIT_LEFT | TRACK_BIT_RIGHT);
+ PPPpreferred[i] = 0xFF; /* We start with preferring everything (end-of-line in any direction) */
+ PPPallowed[i] = AllowedPPPonPCP[i];
+
/* We cycle through all the existing tracks at a PCP and see what
PPPs we want to have, or may not have at all */
- for (k = 0; k < TRACKS_AT_PCP; k++) {
+ for (k = 0; k < NUM_TRACKS_AT_PCP; k++) {
/* Next to us, we have a bridge head, don't worry about that one, if it shows away from us */
- if (
- trackorigin[i][k] == TS_NEIGHBOUR &&
- IsBridgeTile(neighbour) && IsBridgeRamp(neighbour) &&
- GetBridgeRampDirection(neighbour) == ReverseDiagDir(i)
+ if (TrackSourceTile[i][k] == TS_NEIGHBOUR &&
+ IsBridgeTile(neighbour) && IsBridgeRamp(neighbour) &&
+ GetBridgeRampDirection(neighbour) == ReverseDiagDir(i)
) continue;
- if (HASBIT(trackconfig[trackorigin[i][k]], PPPtracks[i][k])) {
- DiagDirection PCPpos = (trackorigin[i][k] == 0) ? i : ReverseDiagDir(i);
- PCPstatus |= 1 << i; /* This PCP is in use */
- PPPpreferred[i] &= PreferredPPPofTrackBitAtPCP[PPPtracks[i][k]][PCPpos];
- PPPallowed[i] &= ~DisallowedPPPofTrackBitAtPCP[PPPtracks[i][k]][PCPpos];
+ /* We check whether the track in question (k) is present in the tile
+ (TrackSourceTile) */
+ if (HASBIT(trackconfig[TrackSourceTile[i][k]], TracksAtPCP[i][k])) {
+ /* track found, if track is in the neighbour tile, adjust the number
+ of the PCP for preferred/allowed determination*/
+ DiagDirection PCPpos = (TrackSourceTile[i][k] == TS_HOME) ? i : ReverseDiagDir(i);
+ SETBIT(PCPstatus, i); /* This PCP is in use */
+
+ PPPpreferred[i] &= PreferredPPPofTrackAtPCP[TracksAtPCP[i][k]][PCPpos];
+ PPPallowed[i] &= ~DisallowedPPPofTrackAtPCP[TracksAtPCP[i][k]][PCPpos];
}
}
@@ -222,48 +227,26 @@ static void DrawCatenaryRailway(const TileInfo *ti)
}
}
- /* Convert the real tileh into a pseudo-tileh for the track */
- if (IsTunnelTile(neighbour)) tileh[TS_NEIGHBOUR] = 0;
- if (IsBridgeTile(neighbour) && IsBridgeRamp(neighbour)) {
- if (tileh[TS_NEIGHBOUR] != 0) {
- tileh[TS_NEIGHBOUR] = 0;
- } else {
- switch (GetBridgeRampDirection(neighbour)) {
- case DIAGDIR_NE: tileh[TS_NEIGHBOUR] = 12; break;
- case DIAGDIR_SE: tileh[TS_NEIGHBOUR] = 6; break;
- case DIAGDIR_SW: tileh[TS_NEIGHBOUR] = 3; break;
- case DIAGDIR_NW: tileh[TS_NEIGHBOUR] = 9; break;
- default: break;
- }
- }
- }
+ AdjustTileh(neighbour, &tileh[TS_NEIGHBOUR]);
/* If we have a straight (and level) track, we want a pylon only every 2 tiles
Delete the PCP if this is the case. */
/* Level means that the slope is the same, or the track is flat */
if (tileh[TS_HOME] == tileh[TS_NEIGHBOUR] || (isflat[TS_HOME] && isflat[TS_NEIGHBOUR])) {
for (k = 0; k < NUM_IGNORE_GROUPS; k++)
- if (PPPpreferred[i] == IgnoredPCP[k][tlg][i]) PCPstatus &= ~(1 << i);
+ if (PPPpreferred[i] == IgnoredPCP[k][tlg][i]) CLRBIT(PCPstatus, i);
}
- /* Now decide where we draw our tiles. First try the preferred PPPs, but they may not exist.
+ /* Now decide where we draw our pylons. First try the preferred PPPs, but they may not exist.
In that case, we try the any of the allowed ones. if they don't exist either, don't draw
- anything */
- if (PPPpreferred[i] != 0) {
- /* Some of the preferred PPPs (the ones in direct extension of the track bit)
- have been used as an "end of line" marker. As these are not ALLOWED, this operation
- cancles them out */
- PPPbuffer[i] = PPPpreferred[i] & PPPallowed[i];
- /* We haven't any buffer yet, so try something else. Fixes 90° curves */
- if (PPPbuffer[i] == 0) PPPbuffer[i] = PPPallowed[i];
- } else {
- PPPbuffer[i] = PPPallowed[i];
- }
+ anything. Note that the preferred PPPs still contain the end-of-line markers.
+ Remove those (simply by ANDing with allowed, since these markers are never allowed) */
+ if ( (PPPallowed[i] & PPPpreferred[i]) != 0) PPPallowed[i] &= PPPpreferred[i];
- if (PPPbuffer[i] != 0 && HASBIT(PCPstatus, i) && !HASBIT(OverridePCP, i)) {
+ if (PPPallowed[i] != 0 && HASBIT(PCPstatus, i) && !HASBIT(OverridePCP, i)) {
for (k = 0; k < DIR_END; k++) {
byte temp = PPPorder[i][GetTLG(ti->tile)][k];
- if (HASBIT(PPPbuffer[i], temp)) {
+ if (HASBIT(PPPallowed[i], temp)) {
uint x = ti->x + x_pcp_offsets[i] + x_ppp_offsets[temp];
uint y = ti->y + y_pcp_offsets[i] + y_ppp_offsets[temp];
diff --git a/table/elrail_data.h b/table/elrail_data.h
index ac613a0dd..85a7eea5c 100644
--- a/table/elrail_data.h
+++ b/table/elrail_data.h
@@ -26,7 +26,7 @@ typedef enum {
} TileSource;
enum {
- TRACKS_AT_PCP = 6
+ NUM_TRACKS_AT_PCP = 6
};
/** Which PPPs are possible at all on a given PCP */
@@ -62,7 +62,7 @@ static const DiagDirection PCPpositions[TRACK_END][2] = {
track, plus the point in extension of the track (to mark end-of-track). PCPs
which are not on either end of the track are fully preferred.
@see PCPpositions */
-static byte PreferredPPPofTrackBitAtPCP[TRACK_END][DIAGDIR_END] = {
+static byte PreferredPPPofTrackAtPCP[TRACK_END][DIAGDIR_END] = {
{ /* X */
1 << DIR_NE | 1 << DIR_SE | 1 << DIR_NW, /* NE */
PCP_NOT_ON_TRACK, /* SE */
@@ -178,7 +178,7 @@ static byte IgnoredPCP[NUM_IGNORE_GROUPS][TLG_END][DIAGDIR_END] = {
#undef NO_IGNORE
/** Which pylons can definately NOT be built */
-static byte DisallowedPPPofTrackBitAtPCP[TRACK_END][DIAGDIR_END] = {
+static byte DisallowedPPPofTrackAtPCP[TRACK_END][DIAGDIR_END] = {
{1 << DIR_SW | 1 << DIR_NE, 0, 1 << DIR_SW | 1 << DIR_NE, 0 }, /* X */
{0, 1 << DIR_NW | 1 << DIR_SE, 0, 1 << DIR_NW | 1 << DIR_SE}, /* Y */
{1 << DIR_W | 1 << DIR_E, 0, 0, 1 << DIR_W | 1 << DIR_E }, /* UPPER */
@@ -188,16 +188,16 @@ static byte DisallowedPPPofTrackBitAtPCP[TRACK_END][DIAGDIR_END] = {
};
/* This array stores which track bits can meet at a tile edge */
-static const Track PPPtracks[DIAGDIR_END][TRACKS_AT_PCP] = {
+static const Track TracksAtPCP[DIAGDIR_END][NUM_TRACKS_AT_PCP] = {
{TRACK_X, TRACK_X, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT},
{TRACK_Y, TRACK_Y, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT},
{TRACK_X, TRACK_X, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT},
{TRACK_Y, TRACK_Y, TRACK_UPPER, TRACK_LOWER, TRACK_LEFT, TRACK_RIGHT},
};
-/* takes each of the 8 track bits from the array above and
+/* takes each of the 6 track bits from the array above and
assigns it to the home tile or neighbour tile */
-static const TileSource trackorigin[DIAGDIR_END][TRACKS_AT_PCP] = {
+static const TileSource TrackSourceTile[DIAGDIR_END][NUM_TRACKS_AT_PCP] = {
{TS_HOME, TS_NEIGHBOUR, TS_HOME , TS_NEIGHBOUR, TS_NEIGHBOUR, TS_HOME },
{TS_HOME, TS_NEIGHBOUR, TS_NEIGHBOUR, TS_HOME , TS_NEIGHBOUR, TS_HOME },
{TS_HOME, TS_NEIGHBOUR, TS_NEIGHBOUR, TS_HOME , TS_HOME , TS_NEIGHBOUR},
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-16 19:36:29 +0000