(svn r26549) -Change: better estimation for link capacities during full load

5 files changed, 90 insertions, 68 deletions

diff --git a/src/linkgraph/linkgraph.cpp b/src/linkgraph/linkgraph.cpp
index 461b3b47e..72d3e42fc 100644
--- a/src/linkgraph/linkgraph.cpp
+++ b/src/linkgraph/linkgraph.cpp
@@ -197,47 +197,41 @@ NodeID LinkGraph::AddNode(const Station *st)
 }
 
 /**
- * Fill an edge with values from a link. If usage < capacity set the usage,
- * otherwise set the restricted or unrestricted update timestamp.
+ * Fill an edge with values from a link. Set the restricted or unrestricted
+ * update timestamp according to the given update mode.
  * @param to Destination node of the link.
  * @param capacity Capacity of the link.
- * @param usage Usage to be added or REFRESH_UNRESTRICTED or REFRESH_RESTRICTED.
+ * @param usage Usage to be added.
+ * @param mode Update mode to be used.
  */
-void LinkGraph::Node::AddEdge(NodeID to, uint capacity, uint usage)
+void LinkGraph::Node::AddEdge(NodeID to, uint capacity, uint usage, EdgeUpdateMode mode)
 {
 	assert(this->index != to);
 	BaseEdge &edge = this->edges[to];
 	BaseEdge &first = this->edges[this->index];
 	edge.capacity = capacity;
+	edge.usage = usage;
 	edge.next_edge = first.next_edge;
 	first.next_edge = to;
-	switch (usage) {
-		case REFRESH_UNRESTRICTED:
-			edge.last_unrestricted_update = _date;
-			break;
-		case REFRESH_RESTRICTED:
-			edge.last_restricted_update = _date;
-			break;
-		default:
-			edge.usage = usage;
-			break;
-	}
+	if (mode & EUM_UNRESTRICTED)  edge.last_unrestricted_update = _date;
+	if (mode & EUM_RESTRICTED) edge.last_restricted_update = _date;
 }
 
 /**
  * Creates an edge if none exists yet or updates an existing edge.
  * @param to Target node.
  * @param capacity Capacity of the link.
- * @param usage Usage to be added or REFRESH_UNRESTRICTED or REFRESH_RESTRICTED.
+ * @param usage Usage to be added.
+ * @param mode Update mode to be used.
  */
-void LinkGraph::Node::UpdateEdge(NodeID to, uint capacity, uint usage)
+void LinkGraph::Node::UpdateEdge(NodeID to, uint capacity, uint usage, EdgeUpdateMode mode)
 {
 	assert(capacity > 0);
-	assert(usage <= capacity || usage == REFRESH_RESTRICTED || usage == REFRESH_UNRESTRICTED);
+	assert(usage <= capacity);
 	if (this->edges[to].capacity == 0) {
-		this->AddEdge(to, capacity, usage);
+		this->AddEdge(to, capacity, usage, mode);
 	} else {
-		(*this)[to].Update(capacity, usage);
+		(*this)[to].Update(capacity, usage, mode);
 	}
 }
 
@@ -270,34 +264,30 @@ void LinkGraph::Node::RemoveEdge(NodeID to)
 }
 
 /**
- * Create a new edge or update an existing one. If usage is REFRESH_UNRESTRICTED
- * or REFRESH_RESTRICTED refresh the edge to have at least the given capacity
- * and also update the respective update timestamp, otherwise add the capacity.
+ * Update an edge. If mode contains UM_REFRESH refresh the edge to have at
+ * least the given capacity and usage, otherwise add the capacity and usage.
+ * In any case set the respective update timestamp(s), according to the given
+ * mode.
  * @param from Start node of the edge.
  * @param to End node of the edge.
  * @param capacity Capacity to be added/updated.
- * @param usage Usage to be added or REFRESH_UNRESTRICTED or REFRESH_RESTRICTED.
+ * @param usage Usage to be added.
+ * @param mode Update mode to be applied.
  */
-void LinkGraph::Edge::Update(uint capacity, uint usage)
+void LinkGraph::Edge::Update(uint capacity, uint usage, EdgeUpdateMode mode)
 {
 	assert(this->edge.capacity > 0);
-	if (usage > capacity) {
-		this->edge.capacity = max(this->edge.capacity, capacity);
-		switch (usage) {
-			case REFRESH_UNRESTRICTED:
-				this->edge.last_unrestricted_update = _date;
-				break;
-			case REFRESH_RESTRICTED:
-				this->edge.last_restricted_update = _date;
-				break;
-			default:
-				NOT_REACHED();
-				break;
-		}
-	} else {
+	assert(capacity >= usage);
+
+	if (mode & EUM_INCREASE) {
 		this->edge.capacity += capacity;
 		this->edge.usage += usage;
+	} else if (mode & EUM_REFRESH) {
+		this->edge.capacity = max(this->edge.capacity, capacity);
+		this->edge.usage = max(this->edge.usage, usage);
 	}
+	if (mode & EUM_UNRESTRICTED) this->edge.last_unrestricted_update = _date;
+	if (mode & EUM_RESTRICTED) this->edge.last_restricted_update = _date;
 }
 
 /**
diff --git a/src/linkgraph/linkgraph.h b/src/linkgraph/linkgraph.h
index 4306ad2b3..7aaa1901d 100644
--- a/src/linkgraph/linkgraph.h
+++ b/src/linkgraph/linkgraph.h
@@ -41,22 +41,6 @@ class LinkGraph : public LinkGraphPool::PoolItem<&_link_graph_pool> {
 public:
 
 	/**
-	 * Special modes for updating links. 'Restricted' means that vehicles with
-	 * 'no loading' orders are serving the link. If a link is only served by
-	 * such vehicles it's 'fully restricted'. This means the link can be used
-	 * by cargo arriving in such vehicles, but not by cargo generated or
-	 * transferring at the source station of the link. In order to find out
-	 * about this condition we keep two update timestamps in each link, one for
-	 * the restricted and one for the unrestricted part of it. If either one
-	 * times out while the other is still valid the link becomes fully
-	 * restricted or fully unrestricted, respectively.
-	 */
-	enum UpdateMode {
-		REFRESH_RESTRICTED = UINT_MAX - 1, ///< Refresh restricted link.
-		REFRESH_UNRESTRICTED = UINT_MAX    ///< Refresh unrestricted link.
-	};
-
-	/**
 	 * Node of the link graph. contains all relevant information from the associated
 	 * station. It's copied so that the link graph job can work on its own data set
 	 * in a separate thread.
@@ -313,7 +297,7 @@ public:
 		 * @param edge Edge to be wrapped.
 		 */
 		Edge(BaseEdge &edge) : EdgeWrapper<BaseEdge>(edge) {}
-		void Update(uint capacity, uint usage);
+		void Update(uint capacity, uint usage, EdgeUpdateMode mode);
 		void Restrict() { this->edge.last_unrestricted_update = INVALID_DATE; }
 		void Release() { this->edge.last_restricted_update = INVALID_DATE; }
 	};
@@ -437,8 +421,8 @@ public:
 			this->node.demand = demand;
 		}
 
-		void AddEdge(NodeID to, uint capacity, uint usage = 0);
-		void UpdateEdge(NodeID to, uint capacity, uint usage = 0);
+		void AddEdge(NodeID to, uint capacity, uint usage, EdgeUpdateMode mode);
+		void UpdateEdge(NodeID to, uint capacity, uint usage, EdgeUpdateMode mode);
 		void RemoveEdge(NodeID to);
 	};
 
diff --git a/src/linkgraph/linkgraph_type.h b/src/linkgraph/linkgraph_type.h
index 330461841..6a3239b08 100644
--- a/src/linkgraph/linkgraph_type.h
+++ b/src/linkgraph/linkgraph_type.h
@@ -39,4 +39,26 @@ enum DistributionType {
 template <> struct EnumPropsT<DistributionType> : MakeEnumPropsT<DistributionType, byte, DT_BEGIN, DT_END, DT_NUM> {};
 typedef TinyEnumT<DistributionType> DistributionTypeByte; // typedefing-enumification of DistributionType
 
+/**
+ * Special modes for updating links. 'Restricted' means that vehicles with
+ * 'no loading' orders are serving the link. If a link is only served by
+ * such vehicles it's 'fully restricted'. This means the link can be used
+ * by cargo arriving in such vehicles, but not by cargo generated or
+ * transferring at the source station of the link. In order to find out
+ * about this condition we keep two update timestamps in each link, one for
+ * the restricted and one for the unrestricted part of it. If either one
+ * times out while the other is still valid the link becomes fully
+ * restricted or fully unrestricted, respectively.
+ * Refreshing a link makes just sure a minimum capacity is kept. Increasing
+ * actually adds the given capacity.
+ */
+enum EdgeUpdateMode {
+	EUM_INCREASE     = 1,      ///< Increase capacity.
+	EUM_REFRESH      = 1 << 1, ///< Refresh capacity.
+	EUM_RESTRICTED   = 1 << 2, ///< Use restricted link.
+	EUM_UNRESTRICTED = 1 << 3, ///< Use unrestricted link.
+};
+
+DECLARE_ENUM_AS_BIT_SET(EdgeUpdateMode)
+
 #endif /* LINKGRAPH_TYPE_H */
diff --git a/src/linkgraph/refresh.cpp b/src/linkgraph/refresh.cpp
index 8c45cad8b..d2a3bdda1 100644
--- a/src/linkgraph/refresh.cpp
+++ b/src/linkgraph/refresh.cpp
@@ -23,8 +23,9 @@
  * Refresh all links the given vehicle will visit.
  * @param v Vehicle to refresh links for.
  * @param allow_merge If the refresher is allowed to merge or extend link graphs.
+ * @param is_full_loading If the vehicle is full loading.
  */
-/* static */ void LinkRefresher::Run(Vehicle *v, bool allow_merge)
+/* static */ void LinkRefresher::Run(Vehicle *v, bool allow_merge, bool is_full_loading)
 {
 	/* If there are no orders we can't predict anything.*/
 	if (v->orders.list == NULL) return;
@@ -34,7 +35,7 @@
 	if (first == NULL) return;
 
 	HopSet seen_hops;
-	LinkRefresher refresher(v, &seen_hops, allow_merge);
+	LinkRefresher refresher(v, &seen_hops, allow_merge, is_full_loading);
 
 	refresher.RefreshLinks(first, first, v->last_loading_station != INVALID_STATION ? 1 << HAS_CARGO : 0);
 }
@@ -65,9 +66,11 @@ bool LinkRefresher::Hop::operator<(const Hop &other) const
  * @param seen_hops Set of hops already seen. This is shared between this
  *                  refresher and all its children.
  * @param allow_merge If the refresher is allowed to merge or extend link graphs.
+ * @param is_full_loading If the vehicle is full loading.
  */
-LinkRefresher::LinkRefresher(Vehicle *vehicle, HopSet *seen_hops, bool allow_merge) :
-		vehicle(vehicle), seen_hops(seen_hops), cargo(CT_INVALID), allow_merge(allow_merge)
+LinkRefresher::LinkRefresher(Vehicle *vehicle, HopSet *seen_hops, bool allow_merge, bool is_full_loading) :
+	vehicle(vehicle), seen_hops(seen_hops), cargo(CT_INVALID), allow_merge(allow_merge),
+	is_full_loading(is_full_loading)
 {
 	/* Assemble list of capacities and set last loading stations to 0. */
 	for (Vehicle *v = this->vehicle; v != NULL; v = v->Next()) {
@@ -205,10 +208,32 @@ void LinkRefresher::RefreshStats(const Order *cur, const Order *next)
 				continue;
 			}
 
-			/* A link is at least partly restricted if a
-			 * vehicle can't load at its source. */
-			IncreaseStats(st, c, next_station, i->second,
-					(cur->GetLoadType() & OLFB_NO_LOAD) == 0 ? LinkGraph::REFRESH_UNRESTRICTED : LinkGraph::REFRESH_RESTRICTED);
+			/* A link is at least partly restricted if a vehicle can't load at its source. */
+			EdgeUpdateMode restricted_mode = (cur->GetLoadType() & OLFB_NO_LOAD) == 0 ?
+						EUM_UNRESTRICTED : EUM_RESTRICTED;
+
+			/* If the vehicle is currently full loading, increase the capacities at the station
+			 * where it is loading by an estimate of what it would have transported if it wasn't
+			 * loading. Don't do that if the vehicle has been waiting for longer than the entire
+			 * order list is supposed to take, though. If that is the case the total duration is
+			 * probably far off and we'd greatly overestimate the capacity by increasing.*/
+			if (this->is_full_loading && this->vehicle->orders.list != NULL &&
+					st->index == vehicle->last_station_visited &&
+					this->vehicle->orders.list->GetTotalDuration() >
+					(Ticks)this->vehicle->current_order_time) {
+				uint effective_capacity = i->second * this->vehicle->load_unload_ticks;
+				if (effective_capacity > (uint)this->vehicle->orders.list->GetTotalDuration()) {
+					IncreaseStats(st, c, next_station, effective_capacity /
+							this->vehicle->orders.list->GetTotalDuration(), 0,
+							EUM_INCREASE | restricted_mode);
+				} else if (RandomRange(this->vehicle->orders.list->GetTotalDuration()) < effective_capacity) {
+					IncreaseStats(st, c, next_station, 1, 0, EUM_INCREASE | restricted_mode);
+				} else {
+					IncreaseStats(st, c, next_station, i->second, 0, EUM_REFRESH | restricted_mode);
+				}
+			} else {
+				IncreaseStats(st, c, next_station, i->second, 0, EUM_REFRESH | restricted_mode);
+			}
 		}
 	}
 }
diff --git a/src/linkgraph/refresh.h b/src/linkgraph/refresh.h
index 6f3f8f9b6..eac34266d 100644
--- a/src/linkgraph/refresh.h
+++ b/src/linkgraph/refresh.h
@@ -23,7 +23,7 @@
  */
 class LinkRefresher {
 public:
-	static void Run(Vehicle *v, bool allow_merge = true);
+	static void Run(Vehicle *v, bool allow_merge = true, bool is_full_loading = false);
 
 protected:
 	/**
@@ -88,8 +88,9 @@ protected:
 	HopSet *seen_hops;          ///< Hops already seen. If the same hop is seen twice we stop the algorithm. This is shared between all Refreshers of the same run.
 	CargoID cargo;              ///< Cargo given in last refit order.
 	bool allow_merge;           ///< If the refresher is allowed to merge or extend link graphs.
+	bool is_full_loading;       ///< If the vehicle is full loading.
 
-	LinkRefresher(Vehicle *v, HopSet *seen_hops, bool allow_merge);
+	LinkRefresher(Vehicle *v, HopSet *seen_hops, bool allow_merge, bool is_full_loading);
 
 	void HandleRefit(const Order *next);
 	void ResetRefit();