/* tr -- a filter to translate characters Copyright (C) 91, 95, 1996 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Written by Jim Meyering, meyering@cs.utexas.edu. */ #include /* Get isblank from GNU libc. */ #define _GNU_SOURCE #include #define NDEBUG 1 #include #include #include #include #if HAVE_LIMITS_H # include #endif #include "system.h" #include "error.h" #ifndef ULONG_MAX #define ULONG_MAX ((unsigned long) ~(unsigned long) 0) #endif #ifndef LONG_MAX #define LONG_MAX ((long int) (ULONG_MAX >> 1)) #endif #ifndef UINT_MAX # define UINT_MAX ((unsigned int) ~(unsigned int) 0) #endif #ifndef INT_MAX # define INT_MAX ((int) (UINT_MAX >> 1)) #endif #ifndef UCHAR_MAX #define UCHAR_MAX 0xFF #endif #define N_CHARS (UCHAR_MAX + 1) /* A pointer to a function that returns an int. */ typedef int (*PFI) (); /* Convert from character C to its index in the collating sequence array. Just cast to an unsigned int to avoid problems with sign-extension. */ #define ORD(c) (unsigned int)(c) /* The inverse of ORD. */ #define CHR(i) (unsigned char)(i) /* The value for Spec_list->state that indicates to get_next that it should initialize the tail pointer. Its value should be as large as possible to avoid conflict a valid value for the state field -- and that may be as large as any valid repeat_count. */ #define BEGIN_STATE (INT_MAX - 1) /* The value for Spec_list->state that indicates to get_next that the element pointed to by Spec_list->tail is being considered for the first time on this pass through the list -- it indicates that get_next should make any necessary initializations. */ #define NEW_ELEMENT (BEGIN_STATE + 1) /* A value distinct from any character that may have been stored in a buffer as the result of a block-read in the function squeeze_filter. */ #define NOT_A_CHAR (unsigned int)(-1) /* The following (but not CC_NO_CLASS) are indices into the array of valid character class strings. */ enum Char_class { CC_ALNUM = 0, CC_ALPHA = 1, CC_BLANK = 2, CC_CNTRL = 3, CC_DIGIT = 4, CC_GRAPH = 5, CC_LOWER = 6, CC_PRINT = 7, CC_PUNCT = 8, CC_SPACE = 9, CC_UPPER = 10, CC_XDIGIT = 11, CC_NO_CLASS = 9999 }; /* Character class to which a character (returned by get_next) belonged; but it is set only if the construct from which the character was obtained was one of the character classes [:upper:] or [:lower:]. The value is used only when translating and then, only to make sure that upper and lower class constructs have the same relative positions in string1 and string2. */ enum Upper_Lower_class { UL_LOWER = 0, UL_UPPER = 1, UL_NONE = 2 }; /* A shortcut to ensure that when constructing the translation array, one of the values returned by paired calls to get_next (from s1 and s2) is from [:upper:] and the other is from [:lower:], or neither is from upper or lower. In fact, no other character classes are allowed when translating, but that condition is tested elsewhere. This array is indexed by values of type enum Upper_Lower_class. */ static int const class_ok[3][3] = { {0, 1, 0}, {1, 0, 0}, {0, 0, 1} }; /* The type of a List_element. See build_spec_list for more details. */ enum Range_element_type { RE_NO_TYPE = 0, RE_NORMAL_CHAR, RE_RANGE, RE_CHAR_CLASS, RE_EQUIV_CLASS, RE_REPEATED_CHAR }; /* One construct in one of tr's argument strings. For example, consider the POSIX version of the classic tr command: tr -cs 'a-zA-Z_' '[\n*]' String1 has 3 constructs, two of which are ranges (a-z and A-Z), and a single normal character, `_'. String2 has one construct. */ struct List_element { enum Range_element_type type; struct List_element *next; union { int normal_char; struct /* unnamed */ { unsigned int first_char; unsigned int last_char; } range; enum Char_class char_class; int equiv_code; struct /* unnamed */ { unsigned int the_repeated_char; size_t repeat_count; } repeated_char; } u; }; /* Each of tr's argument strings is parsed into a form that is easier to work with: a linked list of constructs (struct List_element). Each Spec_list structure also encapsulates various attributes of the corresponding argument string. The attributes are used mainly to verify that the strings are valid in the context of any options specified (like -s, -d, or -c). The main exception is the member `tail', which is first used to construct the list. After construction, it is used by get_next to save its state when traversing the list. The member `state' serves a similar function. */ struct Spec_list { /* Points to the head of the list of range elements. The first struct is a dummy; its members are never used. */ struct List_element *head; /* When appending, points to the last element. When traversing via get_next(), points to the element to process next. Setting Spec_list.state to the value BEGIN_STATE before calling get_next signals get_next to initialize tail to point to head->next. */ struct List_element *tail; /* Used to save state between calls to get_next(). */ unsigned int state; /* Length, in the sense that length ('a-z[:digit:]123abc') is 42 ( = 26 + 10 + 6). */ size_t length; /* The number of [c*] and [c*0] constructs that appear in this spec. */ int n_indefinite_repeats; /* If n_indefinite_repeats is nonzero, this points to the List_element corresponding to the last [c*] or [c*0] construct encountered in this spec. Otherwise it is undefined. */ struct List_element *indefinite_repeat_element; /* Non-zero if this spec contains at least one equivalence class construct e.g. [=c=]. */ int has_equiv_class; /* Non-zero if this spec contains at least one character class construct. E.g. [:digit:]. */ int has_char_class; /* Non-zero if this spec contains at least one of the character class constructs (all but upper and lower) that aren't allowed in s2. */ int has_restricted_char_class; }; /* A representation for escaped string1 or string2. As a string is parsed, any backslash-escaped characters (other than octal or \a, \b, \f, \n, etc.) are marked as such in this structure by setting the corresponding entry in the ESCAPED vector. */ struct E_string { unsigned char *s; int *escaped; size_t len; }; /* Return nonzero if the Ith character of escaped string ES matches C and is not escaped itself. */ #define ES_MATCH(ES, I, C) ((ES)->s[(I)] == (C) && !(ES)->escaped[(I)]) char *xmalloc (); char *stpcpy (); int safe_read (); /* The name by which this program was run. */ char *program_name; /* When nonzero, each sequence in the input of a repeated character (call it c) is replaced (in the output) by a single occurrence of c for every c in the squeeze set. */ static int squeeze_repeats = 0; /* When nonzero, removes characters in the delete set from input. */ static int delete = 0; /* Use the complement of set1 in place of set1. */ static int complement = 0; /* When nonzero, this flag causes GNU tr to provide strict compliance with POSIX draft 1003.2.11.2. The POSIX spec says that when -d is used without -s, string2 (if present) must be ignored. Silently ignoring arguments is a bad idea. The default GNU behavior is to give a usage message and exit. Additionally, when this flag is nonzero, tr prints warnings on stderr if it is being used in a manner that is not portable. Applicable warnings are given by default, but are suppressed if the environment variable `POSIXLY_CORRECT' is set, since being POSIX conformant means we can't issue such messages. Warnings on the following topics are suppressed when this variable is nonzero: 1. Ambiguous octal escapes. */ static int posix_pedantic; /* When tr is performing translation and string1 is longer than string2, POSIX says that the result is undefined. That gives the implementor of a POSIX conforming version of tr two reasonable choices for the semantics of this case. * The BSD tr pads string2 to the length of string1 by repeating the last character in string2. * System V tr ignores characters in string1 that have no corresponding character in string2. That is, string1 is effectively truncated to the length of string2. When nonzero, this flag causes GNU tr to imitate the behavior of System V tr when translating with string1 longer than string2. The default is to emulate BSD tr. This flag is ignored in modes where no translation is performed. Emulating the System V tr in this exceptional case causes the relatively common BSD idiom: tr -cs A-Za-z0-9 '\012' to break (it would convert only zero bytes, rather than all non-alphanumerics, to newlines). WARNING: This switch does not provide general BSD or System V compatibility. For example, it doesn't disable the interpretation of the POSIX constructs [:alpha:], [=c=], and [c*10], so if by some unfortunate coincidence you use such constructs in scripts expecting to use some other version of tr, the scripts will break. */ static int truncate_set1 = 0; /* An alias for (!delete && non_option_args == 2). It is set in main and used there and in validate(). */ static int translating; #ifndef BUFSIZ #define BUFSIZ 8192 #endif #define IO_BUF_SIZE BUFSIZ static unsigned char io_buf[IO_BUF_SIZE]; static char const *const char_class_name[] = { "alnum", "alpha", "blank", "cntrl", "digit", "graph", "lower", "print", "punct", "space", "upper", "xdigit" }; #define N_CHAR_CLASSES (sizeof(char_class_name) / sizeof(char_class_name[0])) typedef char SET_TYPE; /* Array of boolean values. A character `c' is a member of the squeeze set if and only if in_squeeze_set[c] is true. The squeeze set is defined by the last (possibly, the only) string argument on the command line when the squeeze option is given. */ static SET_TYPE in_squeeze_set[N_CHARS]; /* Array of boolean values. A character `c' is a member of the delete set if and only if in_delete_set[c] is true. The delete set is defined by the first (or only) string argument on the command line when the delete option is given. */ static SET_TYPE in_delete_set[N_CHARS]; /* Array of character values defining the translation (if any) that tr is to perform. Translation is performed only when there are two specification strings and the delete switch is not given. */ static char xlate[N_CHARS]; /* If nonzero, display usage information and exit. */ static int show_help; /* If nonzero, print the version on standard output then exit. */ static int show_version; static struct option const long_options[] = { {"complement", no_argument, NULL, 'c'}, {"delete", no_argument, NULL, 'd'}, {"squeeze-repeats", no_argument, NULL, 's'}, {"truncate-set1", no_argument, NULL, 't'}, {"help", no_argument, &show_help, 1}, {"version", no_argument, &show_version, 1}, {NULL, 0, NULL, 0} }; static void usage (int status) { if (status != 0) fprintf (stderr, _("Try `%s --help' for more information.\n"), program_name); else { printf (_("\ Usage: %s [OPTION]... SET1 [SET2]\n\ "), program_name); printf (_("\ Translate, squeeze, and/or delete characters from standard input,\n\ writing to standard output.\n\ \n\ -c, --complement first complement SET1\n\ -d, --delete delete characters in SET1, do not translate\n\ -s, --squeeze-repeats replace sequence of characters with one\n\ -t, --truncate-set1 first truncate SET1 to length of SET2\n\ --help display this help and exit\n\ --version output version information and exit\n\ ")); printf (_("\ \n\ SETs are specified as strings of characters. Most represent themselves.\n\ Interpreted sequences are:\n\ \n\ \\NNN character with octal value NNN (1 to 3 octal digits)\n\ \\\\ backslash\n\ \\a audible BEL\n\ \\b backspace\n\ \\f form feed\n\ \\n new line\n\ \\r return\n\ \\t horizontal tab\n\ \\v vertical tab\n\ CHAR1-CHAR2 all characters from CHAR1 to CHAR2 in ascending order\n\ [CHAR1-CHAR2] same as CHAR1-CHAR2, if both SET1 and SET2 use this\n\ [CHAR*] in SET2, copies of CHAR until length of SET1\n\ [CHAR*REPEAT] REPEAT copies of CHAR, REPEAT octal if starting with 0\n\ [:alnum:] all letters and digits\n\ [:alpha:] all letters\n\ [:blank:] all horizontal whitespace\n\ [:cntrl:] all control characters\n\ [:digit:] all digits\n\ [:graph:] all printable characters, not including space\n\ [:lower:] all lower case letters\n\ [:print:] all printable characters, including space\n\ [:punct:] all punctuation characters\n\ [:space:] all horizontal or vertical whitespace\n\ [:upper:] all upper case letters\n\ [:xdigit:] all hexadecimal digits\n\ [=CHAR=] all characters which are equivalent to CHAR\n\ ")); printf (_("\ \n\ Translation occurs if -d is not given and both SET1 and SET2 appear.\n\ -t may be used only when translating. SET2 is extended to length of\n\ SET1 by repeating its last character as necessary. Excess characters\n\ of SET2 are ignored. Only [:lower:] and [:upper:] are guaranteed to\n\ expand in ascending order; used in SET2 while translating, they may\n\ only be used in pairs to specify case conversion. -s uses SET1 if not\n\ translating nor deleting; else squeezing uses SET2 and occurs after\n\ translation or deletion.\n\ ")); puts (_("\nReport bugs to bug-gnu-utils@gnu.ai.mit.edu")); } exit (status == 0 ? EXIT_SUCCESS : EXIT_FAILURE); } /* Return nonzero if the character C is a member of the equivalence class containing the character EQUIV_CLASS. */ static int is_equiv_class_member (unsigned int equiv_class, unsigned int c) { return (equiv_class == c); } /* Return nonzero if the character C is a member of the character class CHAR_CLASS. */ static int is_char_class_member (enum Char_class char_class, unsigned int c) { int result; switch (char_class) { case CC_ALNUM: result = ISALNUM (c); break; case CC_ALPHA: result = ISALPHA (c); break; case CC_BLANK: result = ISBLANK (c); break; case CC_CNTRL: result = ISCNTRL (c); break; case CC_DIGIT: result = ISDIGIT (c); break; case CC_GRAPH: result = ISGRAPH (c); break; case CC_LOWER: result = ISLOWER (c); break; case CC_PRINT: result = ISPRINT (c); break; case CC_PUNCT: result = ISPUNCT (c); break; case CC_SPACE: result = ISSPACE (c); break; case CC_UPPER: result = ISUPPER (c); break; case CC_XDIGIT: result = ISXDIGIT (c); break; default: abort (); break; } return result; } /* Perform the first pass over each range-spec argument S, converting all \c and \ddd escapes to their one-byte representations. The conversion is done in-place, so S must point to writable storage. If an invalid quote sequence is found print an error message and return nonzero. Otherwise set *LEN to the length of the resulting string and return zero. The resulting array of characters may contain zero-bytes; however, on input, S is assumed to be null-terminated, and hence cannot contain actual (non-escaped) zero bytes. */ static int unquote (const unsigned char *s, struct E_string *es) { size_t i, j; size_t len; len = strlen ((char *) s); es->s = (unsigned char *) xmalloc (len); es->escaped = (int *) xmalloc (len * sizeof (es->escaped[0])); for (i = 0; i < len; i++) es->escaped[i] = 0; j = 0; for (i = 0; s[i]; i++) { switch (s[i]) { int c; case '\\': switch (s[i + 1]) { int oct_digit; case '\\': c = '\\'; break; case 'a': c = '\007'; break; case 'b': c = '\b'; break; case 'f': c = '\f'; break; case 'n': c = '\n'; break; case 'r': c = '\r'; break; case 't': c = '\t'; break; case 'v': c = '\v'; break; case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': c = s[i + 1] - '0'; oct_digit = s[i + 2] - '0'; if (0 <= oct_digit && oct_digit <= 7) { c = 8 * c + oct_digit; ++i; oct_digit = s[i + 2] - '0'; if (0 <= oct_digit && oct_digit <= 7) { if (8 * c + oct_digit < N_CHARS) { c = 8 * c + oct_digit; ++i; } else if (!posix_pedantic) { /* Any octal number larger than 0377 won't fit in 8 bits. So we stop when adding the next digit would put us over the limit and give a warning about the ambiguity. POSIX isn't clear on this, but one person has said that in his interpretation, POSIX says tr can't even give a warning. */ error (0, 0, _("warning: the ambiguous octal escape \ \\%c%c%c is being\n\tinterpreted as the 2-byte sequence \\0%c%c, `%c'"), s[i], s[i + 1], s[i + 2], s[i], s[i + 1], s[i + 2]); } } } break; case '\0': error (0, 0, _("invalid backslash escape at end of string")); return 1; default: if (posix_pedantic) { error (0, 0, _("invalid backslash escape `\\%c'"), s[i + 1]); return 1; } else { c = s[i + 1]; es->escaped[j] = 1; } } ++i; es->s[j++] = c; break; default: es->s[j++] = s[i]; break; } } es->len = j; return 0; } /* If CLASS_STR is a valid character class string, return its index in the global char_class_name array. Otherwise, return CC_NO_CLASS. */ static enum Char_class look_up_char_class (const unsigned char *class_str, size_t len) { unsigned int i; for (i = 0; i < N_CHAR_CLASSES; i++) if (strncmp ((const char *) class_str, char_class_name[i], len) == 0 && strlen (char_class_name[i]) == len) return (enum Char_class) i; return CC_NO_CLASS; } /* Return a newly allocated string with a printable version of C. This function is used solely for formatting error messages. */ static char * make_printable_char (unsigned int c) { char *buf = xmalloc (5); assert (c < N_CHARS); if (ISPRINT (c)) { buf[0] = c; buf[1] = '\0'; } else { sprintf (buf, "\\%03o", c); } return buf; } /* Return a newly allocated copy of S which is suitable for printing. LEN is the number of characters in S. Most non-printing (isprint) characters are represented by a backslash followed by 3 octal digits. However, the characters represented by \c escapes where c is one of [abfnrtv] are represented by their 2-character \c sequences. This function is used solely for printing error messages. */ static char * make_printable_str (const unsigned char *s, size_t len) { /* Worst case is that every character expands to a backslash followed by a 3-character octal escape sequence. */ char *printable_buf = xmalloc (4 * len + 1); char *p = printable_buf; size_t i; for (i = 0; i < len; i++) { char buf[5]; char *tmp = NULL; switch (s[i]) { case '\\': tmp = "\\"; break; case '\007': tmp = "\\a"; break; case '\b': tmp = "\\b"; break; case '\f': tmp = "\\f"; break; case '\n': tmp = "\\n"; break; case '\r': tmp = "\\r"; break; case '\t': tmp = "\\t"; break; case '\v': tmp = "\\v"; break; default: if (ISPRINT (s[i])) { buf[0] = s[i]; buf[1] = '\0'; } else sprintf (buf, "\\%03o", s[i]); tmp = buf; break; } p = stpcpy (p, tmp); } return printable_buf; } /* Append a newly allocated structure representing a character C to the specification list LIST. */ static void append_normal_char (struct Spec_list *list, unsigned int c) { struct List_element *new; new = (struct List_element *) xmalloc (sizeof (struct List_element)); new->next = NULL; new->type = RE_NORMAL_CHAR; new->u.normal_char = c; assert (list->tail); list->tail->next = new; list->tail = new; } /* Append a newly allocated structure representing the range of characters from FIRST to LAST to the specification list LIST. Return nonzero if LAST precedes FIRST in the collating sequence, zero otherwise. This means that '[c-c]' is acceptable. */ static int append_range (struct Spec_list *list, unsigned int first, unsigned int last) { struct List_element *new; if (ORD (first) > ORD (last)) { char *tmp1 = make_printable_char (first); char *tmp2 = make_printable_char (last); error (0, 0, _("range-endpoints of `%s-%s' are in reverse collating sequence order"), tmp1, tmp2); free (tmp1); free (tmp2); return 1; } new = (struct List_element *) xmalloc (sizeof (struct List_element)); new->next = NULL; new->type = RE_RANGE; new->u.range.first_char = first; new->u.range.last_char = last; assert (list->tail); list->tail->next = new; list->tail = new; return 0; } /* If CHAR_CLASS_STR is a valid character class string, append a newly allocated structure representing that character class to the end of the specification list LIST and return 0. If CHAR_CLASS_STR is not a valid string return nonzero. */ static int append_char_class (struct Spec_list *list, const unsigned char *char_class_str, size_t len) { enum Char_class char_class; struct List_element *new; char_class = look_up_char_class (char_class_str, len); if (char_class == CC_NO_CLASS) return 1; new = (struct List_element *) xmalloc (sizeof (struct List_element)); new->next = NULL; new->type = RE_CHAR_CLASS; new->u.char_class = char_class; assert (list->tail); list->tail->next = new; list->tail = new; return 0; } /* Append a newly allocated structure representing a [c*n] repeated character construct to the specification list LIST. THE_CHAR is the single character to be repeated, and REPEAT_COUNT is a non-negative repeat count. */ static void append_repeated_char (struct Spec_list *list, unsigned int the_char, size_t repeat_count) { struct List_element *new; new = (struct List_element *) xmalloc (sizeof (struct List_element)); new->next = NULL; new->type = RE_REPEATED_CHAR; new->u.repeated_char.the_repeated_char = the_char; new->u.repeated_char.repeat_count = repeat_count; assert (list->tail); list->tail->next = new; list->tail = new; } /* Given a string, EQUIV_CLASS_STR, from a [=str=] context and the length of that string, LEN, if LEN is exactly one, append a newly allocated structure representing the specified equivalence class to the specification list, LIST and return zero. If LEN is not 1, return nonzero. */ static int append_equiv_class (struct Spec_list *list, const unsigned char *equiv_class_str, size_t len) { struct List_element *new; if (len != 1) return 1; new = (struct List_element *) xmalloc (sizeof (struct List_element)); new->next = NULL; new->type = RE_EQUIV_CLASS; new->u.equiv_code = *equiv_class_str; assert (list->tail); list->tail->next = new; list->tail = new; return 0; } /* Return a newly allocated copy of the substring P[FIRST_IDX..LAST_IDX]. The returned string has length LAST_IDX - FIRST_IDX + 1, may contain NUL bytes, and is *not* NUL-terminated. */ static unsigned char * substr (const unsigned char *p, size_t first_idx, size_t last_idx) { size_t len; unsigned char *tmp; assert (first_idx <= last_idx); len = last_idx - first_idx + 1; tmp = (unsigned char *) xmalloc (len); assert (first_idx <= last_idx); /* Use memcpy rather than strncpy because `p' may contain zero-bytes. */ memcpy (tmp, p + first_idx, len); return tmp; } /* Search forward starting at START_IDX for the 2-char sequence (PRE_BRACKET_CHAR,']') in the string P of length P_LEN. If such a sequence is found, set *RESULT_IDX to the index of the first character and return nonzero. Otherwise return zero. P may contain zero bytes. */ static int find_closing_delim (const struct E_string *es, size_t start_idx, unsigned int pre_bracket_char, size_t *result_idx) { size_t i; for (i = start_idx; i < es->len - 1; i++) if (es->s[i] == pre_bracket_char && es->s[i + 1] == ']' && !es->escaped[i] && !es->escaped[i + 1]) { *result_idx = i; return 1; } return 0; } /* Convert a string S with explicit length LEN, possibly containing embedded zero bytes, to a long integer value. If the string represents a negative value, a value larger than LONG_MAX, or if all LEN characters do not represent a valid integer, return nonzero and do not modify *VAL. Otherwise, return zero and set *VAL to the converted value. */ static int non_neg_strtol (const unsigned char *s, size_t len, size_t *val) { size_t i; unsigned long sum = 0; unsigned int base; if (len <= 0) return 1; if (s[0] == '0') base = 8; else if (ISDIGIT (s[0])) base = 10; else return 1; for (i = 0; i < len; i++) { unsigned int c; if (s[i] < '0') return 1; c = s[i] - '0'; if (c >= base) return 1; if (sum > (LONG_MAX - c) / base) return 1; sum = sum * base + c; } *val = sum; return 0; } /* Parse the bracketed repeat-char syntax. If the P_LEN characters beginning with P[ START_IDX ] comprise a valid [c*n] construct, then set *CHAR_TO_REPEAT, *REPEAT_COUNT, and *CLOSING_BRACKET_IDX and return zero. If the second character following the opening bracket is not `*' or if no closing bracket can be found, return -1. If a closing bracket is found and the second char is `*', but the string between the `*' and `]' isn't empty, an octal number, or a decimal number, print an error message and return -2. */ static int find_bracketed_repeat (const struct E_string *es, size_t start_idx, unsigned int *char_to_repeat, size_t *repeat_count, size_t *closing_bracket_idx) { size_t i; assert (start_idx + 1 < es->len); if (!ES_MATCH (es, start_idx + 1, '*')) return -1; for (i = start_idx + 2; i < es->len; i++) { if (ES_MATCH (es, i, ']')) { const unsigned char *digit_str; size_t digit_str_len = i - start_idx - 2; *char_to_repeat = es->s[start_idx]; if (digit_str_len == 0) { /* We've matched [c*] -- no explicit repeat count. */ *repeat_count = 0; *closing_bracket_idx = i; return 0; } /* Here, we have found [c*s] where s should be a string of octal or decimal digits. */ digit_str = &es->s[start_idx + 2]; if (non_neg_strtol (digit_str, digit_str_len, repeat_count) || *repeat_count > BEGIN_STATE) { char *tmp = make_printable_str (digit_str, digit_str_len); error (0, 0, _("invalid repeat count `%s' in [c*n] construct"), tmp); free (tmp); return -2; } *closing_bracket_idx = i; return 0; } } return -1; /* No bracket found. */ } /* Return nonzero if the string at ES->s[IDX] matches the regular expression `\*[0-9]*\]', zero otherwise. To match, the `*' and the `]' must not be escaped. */ static int star_digits_closebracket (const struct E_string *es, size_t idx) { size_t i; if (!ES_MATCH (es, idx, '*')) return 0; for (i = idx + 1; i < es->len; i++) { if (!ISDIGIT (es->s[i])) { if (ES_MATCH (es, i, ']')) return 1; return 0; } } return 0; } /* Convert string UNESACPED_STRING (which has been preprocessed to convert backslash-escape sequences) of length LEN characters into a linked list of the following 5 types of constructs: - [:str:] Character class where `str' is one of the 12 valid strings. - [=c=] Equivalence class where `c' is any single character. - [c*n] Repeat the single character `c' `n' times. n may be omitted. However, if `n' is present, it must be a non-negative octal or decimal integer. - r-s Range of characters from `r' to `s'. The second endpoint must not precede the first in the current collating sequence. - c Any other character is interpreted as itself. */ static int build_spec_list (const struct E_string *es, struct Spec_list *result) { const unsigned char *p; size_t i; p = es->s; /* The main for-loop below recognizes the 4 multi-character constructs. A character that matches (in its context) none of the multi-character constructs is classified as `normal'. Since all multi-character constructs have at least 3 characters, any strings of length 2 or less are composed solely of normal characters. Hence, the index of the outer for-loop runs only as far as LEN-2. */ for (i = 0; i + 2 < es->len; /* empty */) { if (ES_MATCH (es, i, '[')) { int matched_multi_char_construct; size_t closing_bracket_idx; unsigned int char_to_repeat; size_t repeat_count; int err; matched_multi_char_construct = 1; if (ES_MATCH (es, i + 1, ':') || ES_MATCH (es, i + 1, '=')) { size_t closing_delim_idx; int found; found = find_closing_delim (es, i + 2, p[i + 1], &closing_delim_idx); if (found) { int parse_failed; unsigned char *opnd_str = substr (p, i + 2, closing_delim_idx - 1); size_t opnd_str_len = closing_delim_idx - 1 - (i + 2) + 1; if (p[i + 1] == ':') { parse_failed = append_char_class (result, opnd_str, opnd_str_len); /* FIXME: big comment. */ if (parse_failed) { if (star_digits_closebracket (es, i + 2)) { free (opnd_str); goto try_bracketed_repeat; } else { char *tmp = make_printable_str (opnd_str, opnd_str_len); error (0, 0, _("invalid character class `%s'"), tmp); free (tmp); return 1; } } } else { parse_failed = append_equiv_class (result, opnd_str, opnd_str_len); /* FIXME: big comment. */ if (parse_failed) { if (star_digits_closebracket (es, i + 2)) { free (opnd_str); goto try_bracketed_repeat; } else { char *tmp = make_printable_str (opnd_str, opnd_str_len); error (0, 0, _("%s: equivalence class operand must be a single character"), tmp); free (tmp); return 1; } } } free (opnd_str); /* Return nonzero if append_*_class reports a problem. */ if (parse_failed) return 1; else i = closing_delim_idx + 2; continue; } /* Else fall through. This could be [:*] or [=*]. */ } try_bracketed_repeat: /* Determine whether this is a bracketed repeat range matching the RE \[.\*(dec_or_oct_number)?\]. */ err = find_bracketed_repeat (es, i + 1, &char_to_repeat, &repeat_count, &closing_bracket_idx); if (err == 0) { append_repeated_char (result, char_to_repeat, repeat_count); i = closing_bracket_idx + 1; } else if (err == -1) { matched_multi_char_construct = 0; } else { /* Found a string that looked like [c*n] but the numeric part was invalid. */ return 1; } if (matched_multi_char_construct) continue; /* We reach this point if P does not match [:str:], [=c=], [c*n], or [c*]. Now, see if P looks like a range `[-c' (from `[' to `c'). */ } /* Look ahead one char for ranges like a-z. */ if (ES_MATCH (es, i + 1, '-')) { if (append_range (result, p[i], p[i + 2])) return 1; i += 3; } else { append_normal_char (result, p[i]); ++i; } } /* Now handle the (2 or fewer) remaining characters p[i]..p[es->len - 1]. */ for (; i < es->len; i++) append_normal_char (result, p[i]); return 0; } /* Given a Spec_list S (with its saved state implicit in the values of its members `tail' and `state'), return the next single character in the expansion of S's constructs. If the last character of S was returned on the previous call or if S was empty, this function returns -1. For example, successive calls to get_next where S represents the spec-string 'a-d[y*3]' will return the sequence of values a, b, c, d, y, y, y, -1. Finally, if the construct from which the returned character comes is [:upper:] or [:lower:], the parameter CLASS is given a value to indicate which it was. Otherwise CLASS is set to UL_NONE. This value is used only when constructing the translation table to verify that any occurrences of upper and lower class constructs in the spec-strings appear in the same relative positions. */ static int get_next (struct Spec_list *s, enum Upper_Lower_class *class) { struct List_element *p; int return_val; int i; if (class) *class = UL_NONE; if (s->state == BEGIN_STATE) { s->tail = s->head->next; s->state = NEW_ELEMENT; } p = s->tail; if (p == NULL) return -1; switch (p->type) { case RE_NORMAL_CHAR: return_val = p->u.normal_char; s->state = NEW_ELEMENT; s->tail = p->next; break; case RE_RANGE: if (s->state == NEW_ELEMENT) s->state = ORD (p->u.range.first_char); else ++(s->state); return_val = CHR (s->state); if (s->state == ORD (p->u.range.last_char)) { s->tail = p->next; s->state = NEW_ELEMENT; } break; case RE_CHAR_CLASS: if (s->state == NEW_ELEMENT) { for (i = 0; i < N_CHARS; i++) if (is_char_class_member (p->u.char_class, i)) break; assert (i < N_CHARS); s->state = i; } assert (is_char_class_member (p->u.char_class, s->state)); return_val = CHR (s->state); for (i = s->state + 1; i < N_CHARS; i++) if (is_char_class_member (p->u.char_class, i)) break; if (i < N_CHARS) s->state = i; else { s->tail = p->next; s->state = NEW_ELEMENT; } if (class) { switch (p->u.char_class) { case CC_LOWER: *class = UL_LOWER; break; case CC_UPPER: *class = UL_UPPER; break; default: /* empty */ break; } } break; case RE_EQUIV_CLASS: /* FIXME: this assumes that each character is alone in its own equivalence class (which appears to be correct for my LC_COLLATE. But I don't know of any function that allows one to determine a character's equivalence class. */ return_val = p->u.equiv_code; s->state = NEW_ELEMENT; s->tail = p->next; break; case RE_REPEATED_CHAR: /* Here, a repeat count of n == 0 means don't repeat at all. */ if (p->u.repeated_char.repeat_count == 0) { s->tail = p->next; s->state = NEW_ELEMENT; return_val = get_next (s, class); } else { if (s->state == NEW_ELEMENT) { s->state = 0; } ++(s->state); return_val = p->u.repeated_char.the_repeated_char; if (p->u.repeated_char.repeat_count > 0 && s->state == p->u.repeated_char.repeat_count) { s->tail = p->next; s->state = NEW_ELEMENT; } } break; case RE_NO_TYPE: abort (); break; default: abort (); break; } return return_val; } /* This is a minor kludge. This function is called from get_spec_stats to determine the cardinality of a set derived from a complemented string. It's a kludge in that some of the same operations are (duplicated) performed in set_initialize. */ static int card_of_complement (struct Spec_list *s) { int c; int cardinality = N_CHARS; SET_TYPE in_set[N_CHARS]; memset (in_set, 0, N_CHARS * sizeof (in_set[0])); s->state = BEGIN_STATE; while ((c = get_next (s, NULL)) != -1) if (!in_set[c]++) --cardinality; return cardinality; } /* Gather statistics about the spec-list S in preparation for the tests in validate that determine the consistency of the specs. This function is called at most twice; once for string1, and again for any string2. LEN_S1 < 0 indicates that this is the first call and that S represents string1. When LEN_S1 >= 0, it is the length of the expansion of the constructs in string1, and we can use its value to resolve any indefinite repeat construct in S (which represents string2). Hence, this function has the side-effect that it converts a valid [c*] construct in string2 to [c*n] where n is large enough (or 0) to give string2 the same length as string1. For example, with the command tr a-z 'A[\n*]Z' on the second call to get_spec_stats, LEN_S1 would be 26 and S (representing string2) would be converted to 'A[\n*24]Z'. */ static void get_spec_stats (struct Spec_list *s) { struct List_element *p; int len = 0; s->n_indefinite_repeats = 0; s->has_equiv_class = 0; s->has_restricted_char_class = 0; s->has_char_class = 0; for (p = s->head->next; p; p = p->next) { switch (p->type) { int i; case RE_NORMAL_CHAR: ++len; break; case RE_RANGE: assert (p->u.range.last_char >= p->u.range.first_char); len += p->u.range.last_char - p->u.range.first_char + 1; break; case RE_CHAR_CLASS: s->has_char_class = 1; for (i = 0; i < N_CHARS; i++) if (is_char_class_member (p->u.char_class, i)) ++len; switch (p->u.char_class) { case CC_UPPER: case CC_LOWER: break; default: s->has_restricted_char_class = 1; break; } break; case RE_EQUIV_CLASS: for (i = 0; i < N_CHARS; i++) if (is_equiv_class_member (p->u.equiv_code, i)) ++len; s->has_equiv_class = 1; break; case RE_REPEATED_CHAR: if (p->u.repeated_char.repeat_count > 0) len += p->u.repeated_char.repeat_count; else if (p->u.repeated_char.repeat_count == 0) { s->indefinite_repeat_element = p; ++(s->n_indefinite_repeats); } break; case RE_NO_TYPE: assert (0); break; } } s->length = len; } static void get_s1_spec_stats (struct Spec_list *s1) { get_spec_stats (s1); if (complement) s1->length = card_of_complement (s1); } static void get_s2_spec_stats (struct Spec_list *s2, size_t len_s1) { get_spec_stats (s2); if (len_s1 >= s2->length && s2->n_indefinite_repeats == 1) { s2->indefinite_repeat_element->u.repeated_char.repeat_count = len_s1 - s2->length; s2->length = len_s1; } } static void spec_init (struct Spec_list *spec_list) { spec_list->head = spec_list->tail = (struct List_element *) xmalloc (sizeof (struct List_element)); spec_list->head->next = NULL; } /* This function makes two passes over the argument string S. The first one converts all \c and \ddd escapes to their one-byte representations. The second constructs a linked specification list, SPEC_LIST, of the characters and constructs that comprise the argument string. If either of these passes detects an error, this function returns nonzero. */ static int parse_str (const unsigned char *s, struct Spec_list *spec_list) { struct E_string es; if (unquote (s, &es)) return 1; if (build_spec_list (&es, spec_list)) return 1; return 0; } /* Given two specification lists, S1 and S2, and assuming that S1->length > S2->length, append a single [c*n] element to S2 where c is the last character in the expansion of S2 and n is the difference between the two lengths. Upon successful completion, S2->length is set to S1->length. The only way this function can fail to make S2 as long as S1 is when S2 has zero-length, since in that case, there is no last character to repeat. So S2->length is required to be at least 1. Providing this functionality allows the user to do some pretty non-BSD (and non-portable) things: For example, the command tr -cs '[:upper:]0-9' '[:lower:]' is almost guaranteed to give results that depend on your collating sequence. */ static void string2_extend (const struct Spec_list *s1, struct Spec_list *s2) { struct List_element *p; int char_to_repeat; int i; assert (translating); assert (s1->length > s2->length); assert (s2->length > 0); p = s2->tail; switch (p->type) { case RE_NORMAL_CHAR: char_to_repeat = p->u.normal_char; break; case RE_RANGE: char_to_repeat = p->u.range.last_char; break; case RE_CHAR_CLASS: for (i = N_CHARS; i >= 0; i--) if (is_char_class_member (p->u.char_class, i)) break; assert (i >= 0); char_to_repeat = CHR (i); break; case RE_REPEATED_CHAR: char_to_repeat = p->u.repeated_char.the_repeated_char; break; case RE_EQUIV_CLASS: /* This shouldn't happen, because validate exits with an error if it finds an equiv class in string2 when translating. */ abort (); break; case RE_NO_TYPE: abort (); break; default: abort (); break; } append_repeated_char (s2, char_to_repeat, s1->length - s2->length); s2->length = s1->length; } /* Return non-zero if S is a non-empty list in which exactly one character (but potentially, many instances of it) appears. E.g. [X*] or xxxxxxxx. */ static int homogeneous_spec_list (struct Spec_list *s) { int b, c; s->state = BEGIN_STATE; if ((b = get_next (s, NULL)) == -1) return 0; while ((c = get_next (s, NULL)) != -1) if (c != b) return 0; return 1; } /* Die with an error message if S1 and S2 describe strings that are not valid with the given command line switches. A side effect of this function is that if a valid [c*] or [c*0] construct appears in string2, it is converted to [c*n] with a value for n that makes s2->length == s1->length. By the same token, if the --truncate-set1 option is not given, S2 may be extended. */ static void validate (struct Spec_list *s1, struct Spec_list *s2) { get_s1_spec_stats (s1); if (s1->n_indefinite_repeats > 0) { error (EXIT_FAILURE, 0, _("the [c*] repeat construct may not appear in string1")); } if (s2) { get_s2_spec_stats (s2, s1->length); if (s2->n_indefinite_repeats > 1) { error (EXIT_FAILURE, 0, _("only one [c*] repeat construct may appear in string2")); } if (translating) { if (s2->has_equiv_class) { error (EXIT_FAILURE, 0, _("[=c=] expressions may not appear in string2 \ when translating")); } if (s1->length > s2->length) { if (!truncate_set1) { /* string2 must be non-empty unless --truncate-set1 is given or string1 is empty. */ if (s2->length == 0) error (EXIT_FAILURE, 0, _("when not truncating set1, string2 must be non-empty")); string2_extend (s1, s2); } } if (complement && s1->has_char_class && ! (s2->length == s1->length && homogeneous_spec_list (s2))) { error (EXIT_FAILURE, 0, _("when translating with complemented character classes,\ \nstring2 must map all characters in the domain to one")); } if (s2->has_restricted_char_class) { error (EXIT_FAILURE, 0, _("when translating, the only character classes that may \ appear in\n\tstring2 are `upper' and `lower'")); } } else /* Not translating. */ { if (s2->n_indefinite_repeats > 0) error (EXIT_FAILURE, 0, _("the [c*] construct may appear in string2 only \ when translating")); } } } /* Read buffers of SIZE bytes via the function READER (if READER is NULL, read from stdin) until EOF. When non-NULL, READER is either read_and_delete or read_and_xlate. After each buffer is read, it is processed and written to stdout. The buffers are processed so that multiple consecutive occurrences of the same character in the input stream are replaced by a single occurrence of that character if the character is in the squeeze set. */ static void squeeze_filter (unsigned char *buf, long int size, PFI reader) { unsigned int char_to_squeeze = NOT_A_CHAR; int i = 0; int nr = 0; for (;;) { int begin; if (i >= nr) { if (reader == NULL) nr = safe_read (0, (char *) buf, size); else nr = (*reader) (buf, size, NULL); if (nr < 0) error (EXIT_FAILURE, errno, _("read error")); if (nr == 0) break; i = 0; } begin = i; if (char_to_squeeze == NOT_A_CHAR) { int out_len; /* Here, by being a little tricky, we can get a significant performance increase in most cases when the input is reasonably large. Since tr will modify the input only if two consecutive (and identical) input characters are in the squeeze set, we can step by two through the data when searching for a character in the squeeze set. This means there may be a little more work in a few cases and perhaps twice as much work in the worst cases where most of the input is removed by squeezing repeats. But most uses of this functionality seem to remove less than 20-30% of the input. */ for (; i < nr && !in_squeeze_set[buf[i]]; i += 2) ; /* empty */ /* There is a special case when i == nr and we've just skipped a character (the last one in buf) that is in the squeeze set. */ if (i == nr && in_squeeze_set[buf[i - 1]]) --i; if (i >= nr) out_len = nr - begin; else { char_to_squeeze = buf[i]; /* We're about to output buf[begin..i]. */ out_len = i - begin + 1; /* But since we stepped by 2 in the loop above, out_len may be one too large. */ if (i > 0 && buf[i - 1] == char_to_squeeze) --out_len; /* Advance i to the index of first character to be considered when looking for a char different from char_to_squeeze. */ ++i; } if (out_len > 0 && fwrite ((char *) &buf[begin], 1, out_len, stdout) == 0) error (EXIT_FAILURE, errno, _("write error")); } if (char_to_squeeze != NOT_A_CHAR) { /* Advance i to index of first char != char_to_squeeze (or to nr if all the rest of the characters in this buffer are the same as char_to_squeeze). */ for (; i < nr && buf[i] == char_to_squeeze; i++) ; /* empty */ if (i < nr) char_to_squeeze = NOT_A_CHAR; /* If (i >= nr) we've squeezed the last character in this buffer. So now we have to read a new buffer and continue comparing characters against char_to_squeeze. */ } } } /* Read buffers of SIZE bytes from stdin until one is found that contains at least one character not in the delete set. Store in the array BUF, all characters from that buffer that are not in the delete set, and return the number of characters saved or 0 upon EOF. */ static long read_and_delete (unsigned char *buf, long int size, PFI not_used) { long n_saved; static int hit_eof = 0; assert (not_used == NULL); assert (size > 0); if (hit_eof) return 0; /* This enclosing do-while loop is to make sure that we don't return zero (indicating EOF) when we've just deleted all the characters in a buffer. */ do { int i; int nr = safe_read (0, (char *) buf, size); if (nr < 0) error (EXIT_FAILURE, errno, _("read error")); if (nr == 0) { hit_eof = 1; return 0; } /* This first loop may be a waste of code, but gives much better performance when no characters are deleted in the beginning of a buffer. It just avoids the copying of buf[i] into buf[n_saved] when it would be a NOP. */ for (i = 0; i < nr && !in_delete_set[buf[i]]; i++) /* empty */ ; n_saved = i; for (++i; i < nr; i++) if (!in_delete_set[buf[i]]) buf[n_saved++] = buf[i]; } while (n_saved == 0); return n_saved; } /* Read at most SIZE bytes from stdin into the array BUF. Then perform the in-place and one-to-one mapping specified by the global array `xlate'. Return the number of characters read, or 0 upon EOF. */ static long read_and_xlate (unsigned char *buf, long int size, PFI not_used) { long chars_read = 0; static int hit_eof = 0; int i; assert (not_used == NULL); assert (size > 0); if (hit_eof) return 0; chars_read = safe_read (0, (char *) buf, size); if (chars_read < 0) error (EXIT_FAILURE, errno, _("read error")); if (chars_read == 0) { hit_eof = 1; return 0; } for (i = 0; i < chars_read; i++) buf[i] = xlate[buf[i]]; return chars_read; } /* Initialize a boolean membership set IN_SET with the character values obtained by traversing the linked list of constructs S using the function `get_next'. If COMPLEMENT_THIS_SET is nonzero the resulting set is complemented. */ static void set_initialize (struct Spec_list *s, int complement_this_set, SET_TYPE *in_set) { int c; int i; memset (in_set, 0, N_CHARS * sizeof (in_set[0])); s->state = BEGIN_STATE; while ((c = get_next (s, NULL)) != -1) in_set[c] = 1; if (complement_this_set) for (i = 0; i < N_CHARS; i++) in_set[i] = (!in_set[i]); } int main (int argc, char **argv) { int c; int non_option_args; struct Spec_list buf1, buf2; struct Spec_list *s1 = &buf1; struct Spec_list *s2 = &buf2; program_name = argv[0]; setlocale (LC_ALL, ""); bindtextdomain (PACKAGE, LOCALEDIR); textdomain (PACKAGE); while ((c = getopt_long (argc, argv, "cdst", long_options, (int *) 0)) != EOF) { switch (c) { case 0: break; case 'c': complement = 1; break; case 'd': delete = 1; break; case 's': squeeze_repeats = 1; break; case 't': truncate_set1 = 1; break; default: usage (2); break; } } if (show_version) { printf ("tr - %s\n", PACKAGE_VERSION); exit (EXIT_SUCCESS); } if (show_help) usage (0); posix_pedantic = (getenv ("POSIXLY_CORRECT") != NULL); non_option_args = argc - optind; translating = (non_option_args == 2 && !delete); /* Change this test if it is valid to give tr no options and no args at all. POSIX doesn't specifically say anything either way, but it looks like they implied it's invalid by omission. If you want to make tr do a slow imitation of `cat' use `tr a a'. */ if (non_option_args > 2) { error (0, 0, _("too many arguments")); usage (2); } if (!delete && !squeeze_repeats && non_option_args != 2) error (EXIT_FAILURE, 0, _("two strings must be given when translating")); if (delete && squeeze_repeats && non_option_args != 2) error (EXIT_FAILURE, 0, _("two strings must be given when both \ deleting and squeezing repeats")); /* If --delete is given without --squeeze-repeats, then only one string argument may be specified. But POSIX says to ignore any string2 in this case, so if POSIXLY_CORRECT is set, pretend we never saw string2. But I think this deserves a fatal error, so that's the default. */ if ((delete && !squeeze_repeats) && non_option_args != 1) { if (posix_pedantic && non_option_args == 2) --non_option_args; else error (EXIT_FAILURE, 0, _("only one string may be given when deleting \ without squeezing repeats")); } if (squeeze_repeats && non_option_args == 0) error (EXIT_FAILURE, 0, _("at least one string must be given when squeezing repeats")); spec_init (s1); if (parse_str ((unsigned char *) argv[optind], s1)) exit (EXIT_FAILURE); if (non_option_args == 2) { spec_init (s2); if (parse_str ((unsigned char *) argv[optind + 1], s2)) exit (EXIT_FAILURE); } else s2 = NULL; validate (s1, s2); if (squeeze_repeats && non_option_args == 1) { set_initialize (s1, complement, in_squeeze_set); squeeze_filter (io_buf, IO_BUF_SIZE, NULL); } else if (delete && non_option_args == 1) { long nr; set_initialize (s1, complement, in_delete_set); do { nr = read_and_delete (io_buf, IO_BUF_SIZE, NULL); if (nr > 0 && fwrite ((char *) io_buf, 1, nr, stdout) == 0) error (EXIT_FAILURE, errno, _("write error")); } while (nr > 0); } else if (squeeze_repeats && delete && non_option_args == 2) { set_initialize (s1, complement, in_delete_set); set_initialize (s2, 0, in_squeeze_set); squeeze_filter (io_buf, IO_BUF_SIZE, (PFI) read_and_delete); } else if (translating) { if (complement) { int i; SET_TYPE *in_s1 = in_delete_set; set_initialize (s1, 0, in_s1); s2->state = BEGIN_STATE; for (i = 0; i < N_CHARS; i++) xlate[i] = i; for (i = 0; i < N_CHARS; i++) { if (!in_s1[i]) { int ch = get_next (s2, NULL); assert (ch != -1 || truncate_set1); if (ch == -1) { /* This will happen when tr is invoked like e.g. tr -cs A-Za-z0-9 '\012'. */ break; } xlate[i] = ch; } } assert (get_next (s2, NULL) == -1 || truncate_set1); } else { int c1, c2; int i; enum Upper_Lower_class class_s1; enum Upper_Lower_class class_s2; for (i = 0; i < N_CHARS; i++) xlate[i] = i; s1->state = BEGIN_STATE; s2->state = BEGIN_STATE; for (;;) { c1 = get_next (s1, &class_s1); c2 = get_next (s2, &class_s2); if (!class_ok[(int) class_s1][(int) class_s2]) error (EXIT_FAILURE, 0, _("misaligned or mismatched upper and/or lower classes")); /* The following should have been checked by validate... */ if (c2 == -1) break; xlate[c1] = c2; } assert (c1 == -1 || truncate_set1); } if (squeeze_repeats) { set_initialize (s2, 0, in_squeeze_set); squeeze_filter (io_buf, IO_BUF_SIZE, (PFI) read_and_xlate); } else { long chars_read; do { chars_read = read_and_xlate (io_buf, IO_BUF_SIZE, NULL); if (chars_read > 0 && fwrite ((char *) io_buf, 1, chars_read, stdout) == 0) error (EXIT_FAILURE, errno, _("write error")); } while (chars_read > 0); } } if (fclose (stdout) == EOF) error (EXIT_FAILURE, errno, _("write error")); if (close (0) != 0) error (EXIT_FAILURE, errno, _("standard input")); exit (EXIT_SUCCESS); }