# simplified Chinese translation of fileutils. # Copyright (C) 1998, 2002 Free Software Foundation, Inc. # Yip Chi Lap , 1998. # Abel Cheung , 2002. # Anthony Fok , 2002. # msgid "" msgstr "" "Project-Id-Version: fileutils 4.1.9\n" "POT-Creation-Date: 2003-07-27 22:05+0200\n" "PO-Revision-Date: 2002-07-19 23:58+0800\n" "Last-Translator: Anthony Fok \n" "Language-Team: Chinese (simplified) \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: lib/argmatch.c:135 #, c-format msgid "invalid argument %s for %s" msgstr "%2$s 的参数 %1$s 无效" #: lib/argmatch.c:136 #, c-format msgid "ambiguous argument %s for %s" msgstr "%2$s 的参数 %1$s 不明确" #: lib/argmatch.c:155 msgid "Valid arguments are:" msgstr "有效的参数为：" #: lib/closeout.c:88 src/cat.c:188 src/cat.c:271 src/cat.c:322 src/cksum.c:268 #: src/head.c:307 src/head.c:357 src/head.c:775 src/head.c:820 src/tail.c:323 #: src/tail.c:1701 src/tr.c:1664 src/tr.c:1911 src/tr.c:2019 msgid "write error" msgstr "写入时发生错误" #: lib/error.c:133 lib/error.c:161 msgid "Unknown system error" msgstr "未知的系统错误" #: lib/file-type.c:42 msgid "regular empty file" msgstr "一般空文件" #: lib/file-type.c:42 msgid "regular file" msgstr "一般文件" #: lib/file-type.c:45 msgid "directory" msgstr "目录" #: lib/file-type.c:48 msgid "block special file" msgstr "区块特殊文件" #: lib/file-type.c:51 msgid "character special file" msgstr "字符特殊文件" #: lib/file-type.c:54 msgid "fifo" msgstr "fifo" #: lib/file-type.c:57 msgid "symbolic link" msgstr "符号链接" #: lib/file-type.c:60 msgid "socket" msgstr "套接字" #: lib/file-type.c:63 msgid "message queue" msgstr "消息队列" #: lib/file-type.c:66 msgid "semaphore" msgstr "信号量" #: lib/file-type.c:69 msgid "shared memory object" msgstr "共享内存对象" #: lib/file-type.c:71 msgid "weird file" msgstr "古怪的文件" #: lib/getopt.c:688 lib/getopt.c:700 #, c-format msgid "%s: option `%s' is ambiguous\n" msgstr "%s：选项‘%s’不明确\n" #: lib/getopt.c:733 lib/getopt.c:737 #, c-format msgid "%s: option `--%s' doesn't allow an argument\n" msgstr "%s：选项‘--%s’不可配合参数使用\n" #: lib/getopt.c:746 lib/getopt.c:751 #, c-format msgid "%s: option `%c%s' doesn't allow an argument\n" msgstr "%s：选项‘%c%s’不可配合参数使用\n" #: lib/getopt.c:787 lib/getopt.c:800 lib/getopt.c:1089 lib/getopt.c:1102 #, c-format msgid "%s: option `%s' requires an argument\n" msgstr "%s：选项‘%s’需要参数\n" #: lib/getopt.c:838 lib/getopt.c:841 #, c-format msgid "%s: unrecognized option `--%s'\n" msgstr "%s：无法识别的选项‘--%s’\n" #: lib/getopt.c:849 lib/getopt.c:852 #, c-format msgid "%s: unrecognized option `%c%s'\n" msgstr "%s：无法识别的选项‘%c%s’\n" #: lib/getopt.c:899 lib/getopt.c:902 #, c-format msgid "%s: illegal option -- %c\n" msgstr "%s：不合法的选项 ― %c\n" #: lib/getopt.c:908 lib/getopt.c:911 #, c-format msgid "%s: invalid option -- %c\n" msgstr "%s：无效的选项 ― %c\n" #: lib/getopt.c:958 lib/getopt.c:969 lib/getopt.c:1155 lib/getopt.c:1168 #, c-format msgid "%s: option requires an argument -- %c\n" msgstr "%s：选项需要参数 ― %c\n" #: lib/getopt.c:1021 lib/getopt.c:1032 #, c-format msgid "%s: option `-W %s' is ambiguous\n" msgstr "%s：选项‘-W %s’不明确\n" #: lib/getopt.c:1056 lib/getopt.c:1068 #, c-format msgid "%s: option `-W %s' doesn't allow an argument\n" msgstr "%s：选项‘-W %s’不可配合参数使用\n" #: lib/human.c:501 msgid "block size" msgstr "块大小" #: lib/makepath.c:112 src/df.c:515 src/remove.c:402 msgid "failed to return to initial working directory" msgstr "" #: lib/makepath.c:161 src/copy.c:1319 src/mkdir.c:171 #, c-format msgid "cannot create directory %s" msgstr "无法创建目录%s" #: lib/makepath.c:167 lib/makepath.c:409 src/cp.c:442 src/cp.c:464 #, c-format msgid "%s exists but is not a directory" msgstr "%s存在但并非目录。" #: lib/makepath.c:304 lib/makepath.c:366 lib/makepath.c:428 #, c-format msgid "cannot change owner and/or group of %s" msgstr "无法更改%s的所有者及/或组" #: lib/makepath.c:326 #, c-format msgid "cannot chdir to directory %s" msgstr "无法切换到目录%s" #: lib/makepath.c:380 lib/makepath.c:395 lib/makepath.c:434 src/install.c:474 #, c-format msgid "cannot change permissions of %s" msgstr "无法更改%s的权限" #: lib/obstack.c:487 lib/obstack.c:490 lib/xmalloc.c:62 msgid "memory exhausted" msgstr "内存用尽" #: lib/quotearg.c:236 msgid "`" msgstr "‘" #: lib/quotearg.c:237 msgid "'" msgstr "’" #: lib/rpmatch.c:72 msgid "^[yY]" msgstr "^[yY]" #: lib/rpmatch.c:75 msgid "^[nN]" msgstr "^[nN]" #: lib/unicodeio.c:155 msgid "iconv function not usable" msgstr "iconv 功能无法使用" #: lib/unicodeio.c:157 msgid "iconv function not available" msgstr "iconv 功能不存在" #: lib/unicodeio.c:164 msgid "character out of range" msgstr "字符值超出可接受的范围以外" #: lib/unicodeio.c:227 #, c-format msgid "cannot convert U+%04X to local character set" msgstr "无法将 U+%04X 转换至用户的字符集" #: lib/unicodeio.c:229 #, c-format msgid "cannot convert U+%04X to local character set: %s" msgstr "无法将 U+%04X 转换至用户的字符集：%s" #: lib/userspec.c:157 msgid "invalid user" msgstr "无效的用户" #: lib/userspec.c:158 msgid "invalid group" msgstr "无效的组" #: lib/userspec.c:160 msgid "cannot get the login group of a numeric UID" msgstr "无法取得 UID 数值所表示的用户的主组" #: lib/userspec.c:162 msgid "cannot omit both user and group" msgstr "不可同时省略用户和所属组" #: lib/version-etc.c:57 #, c-format msgid "Written by %s.\n" msgstr "由 %s 编写。\n" #: lib/version-etc.c:63 msgid "" "This is free software; see the source for copying conditions. There is NO\n" "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n" msgstr "" "这是自由软件；请参考原始码的版权声明。本软体不提供任何保证，甚至不会包括\n" "可售性或适用於任何特定目的的保证。\n" #: lib/xmemcoll.c:54 src/expr.c:714 msgid "string comparison failed" msgstr "字串比较出现错误" #: lib/xmemcoll.c:55 src/expr.c:715 msgid "Set LC_ALL='C' to work around the problem." msgstr "请设定 LC_ALL='C' 避免问题出现。" #: lib/xmemcoll.c:57 src/expr.c:717 #, c-format msgid "The strings compared were %s and %s." msgstr "要比较的字串为 %s 和 %s。" #: src/basename.c:49 src/cat.c:87 src/chgrp.c:122 src/chmod.c:238 #: src/chown.c:95 src/chroot.c:40 src/cksum.c:277 src/comm.c:68 src/cp.c:156 #: src/csplit.c:1492 src/cut.c:178 src/date.c:114 src/dd.c:283 src/df.c:723 #: src/dircolors.c:100 src/dirname.c:41 src/du.c:170 src/echo.c:72 #: src/env.c:114 src/expand.c:107 src/expr.c:99 src/factor.c:69 src/fmt.c:267 #: src/fold.c:62 src/head.c:112 src/hostid.c:40 src/hostname.c:62 src/id.c:82 #: src/install.c:590 src/join.c:139 src/kill.c:90 src/link.c:47 src/ln.c:336 #: src/logname.c:44 src/ls.c:3751 src/md5sum.c:120 src/mkdir.c:57 #: src/mkfifo.c:51 src/mknod.c:51 src/mv.c:303 src/nice.c:61 src/nl.c:172 #: src/nohup.c:52 src/od.c:282 src/paste.c:397 src/pathchk.c:136 #: src/pinky.c:464 src/pr.c:2749 src/printenv.c:59 src/printf.c:96 #: src/ptx.c:1854 src/pwd.c:41 src/readlink.c:63 src/rm.c:96 src/rmdir.c:142 #: src/seq.c:77 src/setuidgid.c:46 src/shred.c:155 src/sleep.c:47 #: src/sort.c:275 src/split.c:92 src/stat.c:690 src/stty.c:485 src/su.c:432 #: src/sum.c:55 src/sync.c:40 src/tac.c:122 src/tail.c:230 src/tee.c:58 #: src/test.c:972 src/touch.c:225 src/tr.c:321 src/tsort.c:92 src/tty.c:58 #: src/uname.c:105 src/unexpand.c:369 src/uniq.c:130 src/unlink.c:47 #: src/uptime.c:186 src/users.c:113 src/wc.c:131 src/who.c:615 src/whoami.c:47 #: src/yes.c:45 #, c-format msgid "Try `%s --help' for more information.\n" msgstr "请尝试执行‘%s --help’来获取更多信息。\n" #: src/basename.c:53 #, fuzzy, c-format msgid "" "Usage: %s NAME [SUFFIX]\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/basename.c:58 msgid "" "Print NAME with any leading directory components removed.\n" "If specified, also remove a trailing SUFFIX.\n" "\n" msgstr "" #: src/basename.c:65 src/cat.c:123 src/chgrp.c:152 src/chmod.c:264 #: src/chown.c:139 src/chroot.c:58 src/cksum.c:292 src/comm.c:85 src/cp.c:253 #: src/csplit.c:1534 src/cut.c:223 src/date.c:216 src/dd.c:341 src/df.c:762 #: src/dircolors.c:121 src/dirname.c:57 src/du.c:219 src/echo.c:104 #: src/env.c:133 src/expand.c:132 src/expr.c:162 src/factor.c:89 #: src/false.c:43 src/fmt.c:297 src/fold.c:85 src/head.c:147 src/hostid.c:53 #: src/hostname.c:75 src/id.c:103 src/install.c:645 src/join.c:180 #: src/kill.c:120 src/link.c:59 src/ln.c:391 src/logname.c:55 src/ls.c:3885 #: src/md5sum.c:156 src/mkdir.c:76 src/mkfifo.c:68 src/mknod.c:82 src/mv.c:357 #: src/nice.c:75 src/nl.c:227 src/nohup.c:68 src/od.c:369 src/paste.c:421 #: src/pathchk.c:148 src/pinky.c:491 src/pr.c:2861 src/printenv.c:72 #: src/printf.c:145 src/pwd.c:52 src/readlink.c:80 src/rm.c:130 #: src/rmdir.c:162 src/seq.c:103 src/setuidgid.c:66 src/shred.c:219 #: src/sleep.c:63 src/sort.c:346 src/split.c:124 src/stat.c:761 src/stty.c:699 #: src/su.c:453 src/sum.c:75 src/sync.c:51 src/tac.c:145 src/tail.c:300 #: src/tee.c:71 src/test.c:1051 src/touch.c:256 src/tr.c:394 src/true.c:43 #: src/tsort.c:104 src/tty.c:70 src/uname.c:127 src/unexpand.c:393 #: src/uniq.c:169 src/unlink.c:58 src/uptime.c:201 src/users.c:126 #: src/wc.c:153 src/who.c:658 src/whoami.c:59 src/yes.c:61 #, fuzzy, c-format msgid "" "\n" "Report bugs to <%s>.\n" msgstr "" "\n" "请向 报告错误。" #: src/basename.c:114 src/chgrp.c:211 src/chmod.c:353 src/chown.c:212 #: src/chroot.c:78 src/comm.c:265 src/csplit.c:1464 src/dirname.c:89 #: src/expr.c:202 src/install.c:281 src/link.c:88 src/mkdir.c:125 #: src/mkfifo.c:114 src/mknod.c:138 src/nohup.c:101 src/pathchk.c:189 #: src/readlink.c:128 src/rm.c:203 src/rmdir.c:207 src/seq.c:411 #: src/setuidgid.c:98 src/sleep.c:139 src/stat.c:813 src/unlink.c:89 msgid "too few arguments" msgstr "参数太少" #: src/basename.c:115 src/dircolors.c:475 src/dirname.c:90 src/hostid.c:76 #: src/hostname.c:122 src/link.c:94 src/logname.c:91 src/mknod.c:140 #: src/readlink.c:136 src/seq.c:417 src/split.c:514 src/tr.c:1847 #: src/uname.c:215 src/unlink.c:95 src/uptime.c:244 src/users.c:169 #: src/who.c:811 msgid "too many arguments" msgstr "参数太多" #: src/cat.c:41 src/split.c:43 msgid "Torbjorn Granlund and Richard M. Stallman" msgstr "" #: src/cat.c:91 #, fuzzy, c-format msgid "Usage: %s [OPTION] [FILE]...\n" msgstr "用法：%s [选项] 文件...\n" #: src/cat.c:95 msgid "" "Concatenate FILE(s), or standard input, to standard output.\n" "\n" " -A, --show-all equivalent to -vET\n" " -b, --number-nonblank number nonblank output lines\n" " -e equivalent to -vE\n" " -E, --show-ends display $ at end of each line\n" " -n, --number number all output lines\n" " -s, --squeeze-blank never more than one single blank line\n" msgstr "" #: src/cat.c:105 msgid "" " -t equivalent to -vT\n" " -T, --show-tabs display TAB characters as ^I\n" " -u (ignored)\n" " -v, --show-nonprinting use ^ and M- notation, except for LFD and TAB\n" msgstr "" #: src/cat.c:113 src/fmt.c:293 src/sum.c:71 msgid "" "\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" #: src/cat.c:118 msgid "" "\n" " -B, --binary use binary writes to the console device.\n" "\n" msgstr "" #: src/cat.c:310 #, fuzzy, c-format msgid "cannot do ioctl on `%s'" msgstr "无法打开目录%s" #: src/cat.c:666 src/dd.c:1233 src/od.c:1012 src/tee.c:181 src/yes.c:112 msgid "standard output" msgstr "标准输出" #: src/cat.c:797 #, fuzzy, c-format msgid "%s: input file is output file" msgstr "%s：文件大小无效" #: src/cat.c:855 #, fuzzy msgid "closing standard input" msgstr "标准输入" #: src/cat.c:858 #, fuzzy msgid "closing standard output" msgstr "标准输出" #: src/chgrp.c:93 msgid "cannot change to null group" msgstr "无法改变所属组至没有名称的组" #: src/chgrp.c:102 #, c-format msgid "invalid group name %s" msgstr "无效的组名称‘%s’" #: src/chgrp.c:106 msgid "group number" msgstr "组代号" #: src/chgrp.c:109 #, c-format msgid "invalid group number %s" msgstr "无效的组代号 %s" #: src/chgrp.c:126 #, c-format msgid "" "Usage: %s [OPTION]... GROUP FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" "用法：%s [选项]... 组 文件...\n" " 或：%s [选项]... --reference=参考文件 文件...\n" #: src/chgrp.c:131 msgid "" "Change the group membership of each FILE to GROUP.\n" "\n" " -c, --changes like verbose but report only when a change is made\n" " --dereference affect the referent of each symbolic link, rather\n" " than the symbolic link itself\n" msgstr "" "将每个<文件>的所属组设定为<组>。\n" "\n" " -c, --changes 像 --verbose，但只在有更改时才显示结果\n" " --dereference 会影响符号链接所指示的对象，而非符号链接本身\n" #: src/chgrp.c:138 src/chown.c:112 msgid "" " -h, --no-dereference affect symbolic links instead of any referenced " "file\n" " (available only on systems that can change the\n" " ownership of a symlink)\n" msgstr "" " -h, --no-dereference 会影响符号链接本身，而非符号链接所指示的目的地\n" " (当系统支持更改符号链接的所有者，此选项才有效)\n" #: src/chgrp.c:143 msgid "" " -f, --silent, --quiet suppress most error messages\n" " --reference=RFILE use RFILE's group rather than the specified\n" " GROUP value\n" " -R, --recursive operate on files and directories recursively\n" " -v, --verbose output a diagnostic for every file processed\n" msgstr "" " -f, --silent, --quiet 去除大部份的错误信息\n" " --reference=参考文件 使用<参考文件>的所属组，而非指定的<组>\n" " -R, --recursive 递归处理所有的文件及子目录\n" " -v, --verbose 处理任何文件都会显示信息\n" #: src/chgrp.c:219 src/chmod.c:157 src/chmod.c:366 src/chown-core.c:235 #: src/chown-core.c:247 src/chown.c:221 src/cp.c:299 src/touch.c:153 #: src/touch.c:349 #, c-format msgid "failed to get attributes of %s" msgstr "无法取得 %s 的属性" #: src/chmod.c:102 #, c-format msgid "getting new attributes of %s" msgstr "正在检查 %s 的最新属性" #: src/chmod.c:124 #, c-format msgid "mode of %s changed to %04lo (%s)\n" msgstr "%s 的权限模式已更改为 %04lo (%s)\n" #: src/chmod.c:127 #, c-format msgid "failed to change mode of %s to %04lo (%s)\n" msgstr "无法将 %s 的权限模式更改为 %04lo (%s)\n" #: src/chmod.c:130 #, c-format msgid "mode of %s retained as %04lo (%s)\n" msgstr "%s 的权限模式保留为 %04lo (%s)\n" #: src/chmod.c:179 #, c-format msgid "changing permissions of %s" msgstr "正在更改 %s 的权限" #: src/chmod.c:242 #, c-format msgid "" "Usage: %s [OPTION]... MODE[,MODE]... FILE...\n" " or: %s [OPTION]... OCTAL-MODE FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" "用法：%s [选项]... 模式[,模式]... 文件...\n" " 或：%s [选项]... 八进制模式 文件...\n" " 或：%s [选项]... --reference=参考文件 文件...\n" #: src/chmod.c:248 msgid "" "Change the mode of each FILE to MODE.\n" "\n" " -c, --changes like verbose but report only when a change is " "made\n" " -f, --silent, --quiet suppress most error messages\n" " -v, --verbose output a diagnostic for every file processed\n" " --reference=RFILE use RFILE's mode instead of MODE values\n" " -R, --recursive change files and directories recursively\n" msgstr "" "更改每个<文件>的权限<模式>。\n" "\n" " -c, --changes 类似 --verbose，但只在有更改时才显示结果\n" " -f, --silent, --quiet 去除大部份的错误信息\n" " -v, --verbose 处理任何文件都会显示信息\n" " --reference=参考文件 使用<参考文件>的模式，而非自行指定权限模式\n" " -R, --recursive 以递归方式更改所有的文件及子目录\n" #: src/chmod.c:259 msgid "" "\n" "Each MODE is one or more of the letters ugoa, one of the symbols +-= and\n" "one or more of the letters rwxXstugo.\n" msgstr "" "\n" "<模式>由三部份组成：一个或以上的 ugoa 字母，一个或以上的 +-= 符号，\n" "和一个或以上的 rwxXstugo 字母。\n" #: src/chmod.c:321 #, c-format msgid "invalid character %s in mode string %s" msgstr "权限模式字串 %2$s 中出现无效的字符 %1$s" #: src/chmod.c:362 #, c-format msgid "invalid mode string: %s" msgstr "权限模式字串无效：%s " #: src/chown-core.c:116 #, c-format msgid "neither symbolic link %s nor referent has been changed\n" msgstr "符号链接 %s 和该链接所指示的对象都没有更改\n" #: src/chown-core.c:143 #, c-format msgid "changed ownership of %s to %s\n" msgstr "%s 的所有者已更改为 %s\n" #: src/chown-core.c:144 #, c-format msgid "changed group of %s to %s\n" msgstr "%s 的所属组已更改为 %s\n" #: src/chown-core.c:148 #, c-format msgid "failed to change ownership of %s to %s\n" msgstr "无法更改 %s 的所有者为 %s\n" #: src/chown-core.c:149 #, c-format msgid "failed to change group of %s to %s\n" msgstr "无法更改 %s 的所属组为 %s\n" #: src/chown-core.c:153 #, c-format msgid "ownership of %s retained as %s\n" msgstr "%s 的所有者已保留为 %s\n" #: src/chown-core.c:154 #, c-format msgid "group of %s retained as %s\n" msgstr "%s 的所属组已保留为 %s\n" #: src/chown-core.c:328 #, c-format msgid "changing ownership of %s" msgstr "正在更改 %s 的所有者" #: src/chown-core.c:329 #, c-format msgid "changing group of %s" msgstr "正在更改 %s 的所属组" #: src/chown.c:99 #, c-format msgid "" "Usage: %s [OPTION]... OWNER[:[GROUP]] FILE...\n" " or: %s [OPTION]... :GROUP FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" "用法：%s [选项]... 所有者[:[组]] 文件...\n" " 或：%s [选项]... :组 文件...\n" " 或：%s [选项]... --reference=参考文件 文件...\n" #: src/chown.c:105 msgid "" "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" "\n" " -c, --changes like verbose but report only when a change is made\n" " --dereference affect the referent of each symbolic link, rather\n" " than the symbolic link itself\n" msgstr "" "更改每个 <文件> 的 <所有者> 及/或 <所属组>。\n" "\n" " -c, --changes 像 --verbose，但只在有更改时才显示结果\n" " --dereference 受影响的是符号链接所指示的对象，而非符号链接本身\n" #: src/chown.c:117 msgid "" " --from=CURRENT_OWNER:CURRENT_GROUP\n" " change the owner and/or group of each file only if\n" " its current owner and/or group match those " "specified\n" " here. Either may be omitted, in which case a " "match\n" " is not required for the omitted attribute.\n" msgstr "" " --from=目前所有者:目前组\n" " 只当每个文件的所有者和组符合选项所指定的，\n" " 才会更改所有者和组。其中一个可以省略，这时\n" " 已省略的属性就不需要符合原有的属性。\n" #: src/chown.c:124 msgid "" " -f, --silent, --quiet suppress most error messages\n" " --reference=RFILE use RFILE's owner and group rather than\n" " the specified OWNER:GROUP values\n" " -R, --recursive operate on files and directories recursively\n" " -v, --verbose output a diagnostic for every file processed\n" msgstr "" " -f, --silent, --quiet 去除大部份的错误信息\n" " --reference=参考文件 使用<参考文件>的所属组，而非指定的<组>\n" " -R, --recursive 递归处理所有的文件及子目录\n" " -v, --verbose 处理任何文件都会显示信息\n" #: src/chown.c:133 msgid "" "\n" "Owner is unchanged if missing. Group is unchanged if missing, but changed\n" "to login group if implied by a `:'. OWNER and GROUP may be numeric as well\n" "as symbolic.\n" msgstr "" "\n" "如果没有指定<所有者>，则不会更改。<组>若没有指定也不会更改，但当加上\n" "‘:’时<组>会更改为指定所有者的主要组。<所有者>和<组>可以是数字\n" "或名称。\n" #: src/chroot.c:44 #, fuzzy, c-format msgid "" "Usage: %s NEWROOT [COMMAND...]\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/chroot.c:48 msgid "" "Run COMMAND with root directory set to NEWROOT.\n" "\n" msgstr "" #: src/chroot.c:54 msgid "" "\n" "If no command is given, run ``${SHELL} -i'' (default: /bin/sh).\n" msgstr "" #: src/chroot.c:84 #, fuzzy, c-format msgid "cannot change root directory to %s" msgstr "无法进入目录 %s" #: src/chroot.c:87 #, fuzzy msgid "cannot chdir to root directory" msgstr "无法切换到目录%s" #: src/cksum.c:233 #, fuzzy, c-format msgid "%s: file too long" msgstr "%s：文件过大" #: src/cksum.c:281 #, fuzzy, c-format msgid "" "Usage: %s [FILE]...\n" " or: %s [OPTION]\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/cksum.c:286 msgid "" "Print CRC checksum and byte counts of each FILE.\n" "\n" msgstr "" #: src/comm.c:34 src/ls.c:122 src/uniq.c:39 msgid "Richard Stallman and David MacKenzie" msgstr "Richard Stallman 和 David MacKenzie" #: src/comm.c:72 #, fuzzy, c-format msgid "Usage: %s [OPTION]... LEFT_FILE RIGHT_FILE\n" msgstr "用法：%s [选项]... [文件]\n" #: src/comm.c:76 msgid "" "Compare sorted files LEFT_FILE and RIGHT_FILE line by line.\n" "\n" " -1 suppress lines unique to left file\n" " -2 suppress lines unique to right file\n" " -3 suppress lines that appear in both files\n" msgstr "" #: src/copy.c:158 src/du.c:332 #, c-format msgid "cannot access %s" msgstr "无法访问%s" #: src/copy.c:222 src/fmt.c:435 src/head.c:867 src/tail.c:1247 #, c-format msgid "cannot open %s for reading" msgstr "无法打开 %s 来读取数据" #: src/copy.c:228 src/copy.c:282 src/copy.c:297 src/dd.c:1210 src/tail.c:1090 #: src/tail.c:1160 #, c-format msgid "cannot fstat %s" msgstr "无法 fstat%s" #: src/copy.c:238 #, c-format msgid "skipping file %s, as it was replaced while being copied" msgstr "略过文件%s，因为准备复制时它已被其他文件取代" #: src/copy.c:258 src/copy.c:884 src/copy.c:1065 src/copy.c:1155 src/ln.c:292 #: src/remove.c:734 src/remove.c:788 src/remove.c:909 src/remove.c:1016 #, c-format msgid "cannot remove %s" msgstr "无法删除%s" #: src/copy.c:273 #, c-format msgid "cannot create regular file %s" msgstr "无法创建一般文件%s" #: src/copy.c:324 src/dd.c:826 src/dd.c:1020 #, c-format msgid "reading %s" msgstr "正在读入%s" #: src/copy.c:358 src/head.c:440 #, c-format msgid "cannot lseek %s" msgstr "无法 lseek%s" #: src/copy.c:373 src/copy.c:397 src/dd.c:1064 src/dd.c:1125 #, c-format msgid "writing %s" msgstr "正在写入%s" #: src/copy.c:405 src/copy.c:411 src/head.c:875 #, c-format msgid "closing %s" msgstr "正在关闭%s" #: src/copy.c:628 #, c-format msgid "%s: overwrite %s, overriding mode %04lo? " msgstr "%s：是否覆盖%s，而不理会权限模式 %04lo? " #: src/copy.c:634 #, c-format msgid "%s: overwrite %s? " msgstr "%s：是否覆盖%s? " #: src/copy.c:828 src/copy.c:866 src/df.c:492 src/stat.c:648 #, c-format msgid "cannot stat %s" msgstr "stat%s失败" #: src/copy.c:838 #, c-format msgid "omitting directory %s" msgstr "略过目录%s" #: src/copy.c:852 #, c-format msgid "warning: source file %s specified more than once" msgstr "警告：指定来源文件%s多於一次" #: src/copy.c:897 src/ln.c:238 #, c-format msgid "%s and %s are the same file" msgstr "%s及%s为同一文件" #: src/copy.c:907 #, c-format msgid "cannot overwrite non-directory %s with directory %s" msgstr "无法以目录%2$s来覆盖非目录%1$s" #: src/copy.c:924 #, c-format msgid "will not overwrite just-created %s with %s" msgstr "不会以%2$s覆盖刚创建的%1$s" #: src/copy.c:935 #, c-format msgid "cannot overwrite directory %s with non-directory" msgstr "无法以非目录来覆盖目录%s" #: src/copy.c:996 #, c-format msgid "cannot overwrite directory %s" msgstr "无法覆盖目录%s" #: src/copy.c:1005 #, c-format msgid "cannot move directory onto non-directory: %s -> %s" msgstr "无法将目录移动至非目录：%s→%s" #: src/copy.c:1028 #, c-format msgid "backing up %s would destroy source; %s not moved" msgstr "将%s备份会破坏来源文件，故不移动%s。" #: src/copy.c:1029 #, c-format msgid "backing up %s would destroy source; %s not copied" msgstr "将%s备份会破坏来源文件，故不复制%s。" #: src/copy.c:1044 src/ln.c:274 #, c-format msgid "cannot backup %s" msgstr "无法备份%s" #: src/copy.c:1080 src/ln.c:309 #, c-format msgid " (backup: %s)" msgstr " (备份：%s)" #: src/copy.c:1130 #, c-format msgid "cannot copy a directory, %s, into itself, %s" msgstr "无法将目录%s复制至原来位置%s" #: src/copy.c:1137 #, c-format msgid "will not create hard link %s to directory %s" msgstr "不会创建连至目录%2$s的硬链接%1$s" #: src/copy.c:1163 #, c-format msgid "cannot create hard link %s to %s" msgstr "无法创建连至%2$s的硬链接%1$s" #: src/copy.c:1217 #, c-format msgid "cannot move %s to a subdirectory of itself, %s" msgstr "无法将目录%s移动至本身的子目录%s下" #: src/copy.c:1260 #, c-format msgid "cannot move %s to %s" msgstr "无法移动%s至%s" #: src/copy.c:1272 #, c-format msgid "inter-device move failed: %s to %s; unable to remove target" msgstr "无法进行跨设备的移动 (%s至%s)；无法删除目标文件或目录" #: src/copy.c:1300 #, c-format msgid "cannot copy cyclic symbolic link %s" msgstr "无法复制循环的符号链接%s" #: src/copy.c:1377 #, c-format msgid "%s: can make relative symbolic links only in current directory" msgstr "%s：只能於目前的目录中创建相对符号链接" #: src/copy.c:1384 #, c-format msgid "cannot create symbolic link %s to %s" msgstr "无法创建连至%2$s的符号链接%1$s" #: src/copy.c:1395 #, c-format msgid "cannot create link %s" msgstr "无法创建链接%s" #: src/copy.c:1420 src/mkfifo.c:134 #, c-format msgid "cannot create fifo %s" msgstr "无法创建 fifo 文件%s" #: src/copy.c:1434 #, c-format msgid "cannot create special file %s" msgstr "无法创建特殊文件%s" #: src/copy.c:1446 src/ls.c:2485 src/stat.c:436 #, c-format msgid "cannot read symbolic link %s" msgstr "无法读取符号链接%s" #: src/copy.c:1471 #, c-format msgid "cannot create symbolic link %s" msgstr "无法创建符号链接%s" #: src/copy.c:1487 src/copy.c:1550 src/cp.c:335 #, c-format msgid "failed to preserve ownership for %s" msgstr "无法保留%s的所有者" #: src/copy.c:1502 #, c-format msgid "%s has unknown file type" msgstr "%s的文件类型不详" #: src/copy.c:1537 #, c-format msgid "preserving times for %s" msgstr "保留%s的时间" #: src/copy.c:1562 #, fuzzy, c-format msgid "failed to lookup file %s" msgstr "无法保留%s的时间" #: src/copy.c:1567 #, c-format msgid "failed to preserve authorship for %s" msgstr "无法保留%s的著作者" #: src/copy.c:1586 #, c-format msgid "setting permissions for %s" msgstr "设定%s的权限" #: src/copy.c:1608 src/ln.c:327 #, c-format msgid "cannot un-backup %s" msgstr "无法将 %s 的备份还原" #: src/copy.c:1612 #, c-format msgid "%s -> %s (unbackup)\n" msgstr "%s → %s (还原备份)\n" #: src/cp.c:49 msgid "Torbjorn Granlund, David MacKenzie, and Jim Meyering" msgstr "Torbjorn Granlund、David MacKenzie 及 Jim Meyering" #: src/cp.c:160 src/mv.c:307 #, c-format msgid "" "Usage: %s [OPTION]... SOURCE DEST\n" " or: %s [OPTION]... SOURCE... DIRECTORY\n" " or: %s [OPTION]... --target-directory=DIRECTORY SOURCE...\n" msgstr "" "用法：%s [选项]... 来源 目的地\n" " 或：%s [选项]... 来源... 目录\n" " 或：%s [选项]... --target-directory=目录 来源...\n" #: src/cp.c:166 msgid "" "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" "\n" msgstr "" "将<来源>文件复制至<目的地>，或将多个<文件>复制至<目录>。\n" "\n" #: src/cp.c:170 src/csplit.c:1505 src/cut.c:190 src/df.c:733 src/du.c:179 #: src/expand.c:120 src/fmt.c:277 src/fold.c:75 src/head.c:126 #: src/install.c:606 src/kill.c:104 src/ln.c:355 src/ls.c:3761 src/mkdir.c:66 #: src/mkfifo.c:60 src/mknod.c:61 src/mv.c:317 src/nl.c:185 src/paste.c:411 #: src/pr.c:2762 src/ptx.c:1866 src/shred.c:165 src/sort.c:289 src/split.c:105 #: src/tac.c:135 src/tail.c:244 src/touch.c:234 src/unexpand.c:382 #: src/uniq.c:143 msgid "" "Mandatory arguments to long options are mandatory for short options too.\n" msgstr "长选项必须用的参数在使用短选项时也是必须的。\n" #: src/cp.c:173 msgid "" " -a, --archive same as -dpR\n" " --backup[=CONTROL] make a backup of each existing destination " "file\n" " -b like --backup but does not accept an " "argument\n" " --copy-contents copy contents of special files when " "recursive\n" " -d same as --no-dereference --preserve=link\n" msgstr "" " -a, --archive 等於 -dpR\n" " --backup[=CONTROL] 为每个已存在的目的地文件创建备份文件\n" " -b 类似 --backup，但不接受任何参数\n" " --copy-contents 当使用递归模式时复制特殊文件的内容\n" " -d 等於 --no-dereference --preserve=link\n" #: src/cp.c:180 msgid "" " --no-dereference never follow symbolic links\n" " -f, --force if an existing destination file cannot be\n" " opened, remove it and try again\n" " -i, --interactive prompt before overwrite\n" " -H follow command-line symbolic links\n" msgstr "" " --no-dereference 不会找出符号链接指示的真正目的地\n" " -f, --force 如果无法打开已存在的文件，会删除该文件并再\n" " 尝试打开\n" " -i, --interactive 覆盖文件前需要确认\n" " -H 使用命令列中的符号链接指示的真正目的地\n" #: src/cp.c:187 msgid "" " -l, --link link files instead of copying\n" " -L, --dereference always follow symbolic links\n" " -p same as --preserve=mode,ownership,timestamps\n" " --preserve[=ATTR_LIST] preserve the specified attributes (default:\n" " mode,ownership,timestamps), if possible\n" " additional attributes: links, all\n" msgstr "" " -l, --link 链接而非复制文件\n" " -L, --dereference 一定先找出符号链接指示的真正目的地\n" " -p 等於 --preserve=mode,ownership,timestamps\n" " --preserve[=ATTR_LIST] 若可能，保留指定的文件属性\n" " (默认值为：mode,ownership,timestamps)\n" " 额外的属性有：links、all\n" #: src/cp.c:195 msgid "" " --no-preserve=ATTR_LIST don't preserve the specified attributes\n" " --parents append source path to DIRECTORY\n" " -P same as `--no-dereference'\n" msgstr "" " --sno-preserve=ATTR_LIST 不保留指定的文件属性\n" " --parents 复制前先在<目录>创建来源文件路径中的所有目录\n" " -P 等於‘--no-dereference’\n" #: src/cp.c:200 msgid "" " -R, -r, --recursive copy directories recursively\n" " --remove-destination remove each existing destination file before\n" " attempting to open it (contrast with --" "force)\n" msgstr "" " -R, -r, --recursive 复制目录及目录内的所有项目\n" " --remove-destination 尝试打开目的地文件前先删除已存在的目的地\n" " 文件 (与 --force 选项作对比)\n" #: src/cp.c:205 msgid "" " --reply={yes,no,query} specify how to handle the prompt about an\n" " existing destination file\n" " --sparse=WHEN control creation of sparse files\n" " --strip-trailing-slashes remove any trailing slashes from each SOURCE\n" " argument\n" msgstr "" " --reply={yes,no,query} 指定如何处理已存在的目的地文件\n" " --sparse=WHEN 控制创建 sparse 文件的方式\n" " --strip-trailing-slashes 删除参数中所有<来源>文件/目录末端的斜杠\n" #: src/cp.c:212 msgid "" " -s, --symbolic-link make symbolic links instead of copying\n" " -S, --suffix=SUFFIX override the usual backup suffix\n" " --target-directory=DIRECTORY move all SOURCE arguments into " "DIRECTORY\n" msgstr "" " -s, --symbolic-link 只创建符号链接而不是复制文件\n" " -S, --suffix=后缀 自行指定备份文件的<后缀>\n" " --target-directory=目录 将所有参数指定的<来源>文件/目录复制至<目录>\n" #: src/cp.c:217 msgid "" " -u, --update copy only when the SOURCE file is newer\n" " than the destination file or when the\n" " destination file is missing\n" " -v, --verbose explain what is being done\n" " -x, --one-file-system stay on this file system\n" msgstr "" " -u, --update 只在<来源>文件比目的地文件新，或目的地文件\n" " 不存在时才进行复制\n" " -v, --verbose 详细显示进行的步骤\n" " -x, --one-file-system 不会跨越文件系统进行操作\n" #: src/cp.c:226 msgid "" "\n" "By default, sparse SOURCE files are detected by a crude heuristic and the\n" "corresponding DEST file is made sparse as well. That is the behavior\n" "selected by --sparse=auto. Specify --sparse=always to create a sparse DEST\n" "file whenever the SOURCE file contains a long enough sequence of zero " "bytes.\n" "Use --sparse=never to inhibit creation of sparse files.\n" "\n" msgstr "" "\n" "默认使用模式中，<来源>文件是否 sparse 文件会由一种粗略的方式决定，而且相应\n" "的<目的地>文件也会是 sparse 文件。此方式等於使用 --sparse=auto 选项。指定\n" "--sparse=always 则只要<来源>文件含有足够长的 0 字节都会产生 sparse 的\n" "<目的地>文件。\n" "使用 --sparse=never 会禁止产生 sparse 文件。\n" "\n" #: src/cp.c:235 msgid "" "The backup suffix is `~', unless set with --suffix or SIMPLE_BACKUP_SUFFIX.\n" "The version control method may be selected via the --backup option or " "through\n" "the VERSION_CONTROL environment variable. Here are the values:\n" "\n" msgstr "" "备份文件的后缀为‘~’，除非以 --suffix 选项或是 SIMPLE_BACKUP_SUFFIX\n" "环境变量指定。版本控制的方式可透过 --backup 选项或 VERSION_CONTROL 环境\n" "变量来选择。以下是可用的变量值：\n" "\n" #: src/cp.c:241 src/install.c:639 src/ln.c:385 src/mv.c:351 msgid "" " none, off never make backups (even if --backup is given)\n" " numbered, t make numbered backups\n" " existing, nil numbered if numbered backups exist, simple otherwise\n" " simple, never always make simple backups\n" msgstr "" " none, off 不会进行备份 (即使使用了 --backup 选项)\n" " numbered, t 备份文件会加上数字\n" " existing, nil 若有数字的备份文件已经存在则使用数字，否则使用普通方式备" "份\n" " simple, never 永远使用普通方式备份\n" #: src/cp.c:247 msgid "" "\n" "As a special case, cp makes a backup of SOURCE when the force and backup\n" "options are given and SOURCE and DEST are the same name for an existing,\n" "regular file.\n" msgstr "" "\n" "有一个特别情况：如果同时指定 --force 和 --backup 选项，而且<来源>和<目的地>\n" "是同一个已存在的一般文件的话，cp 会将<来源>文件备份。\n" #: src/cp.c:321 #, c-format msgid "failed to preserve times for %s" msgstr "无法保留%s的时间" #: src/cp.c:345 #, c-format msgid "failed to preserve permissions for %s" msgstr "无法保留%s的权限" #: src/cp.c:430 #, c-format msgid "cannot make directory %s" msgstr "无法创建目录%s" #: src/cp.c:489 src/ln.c:489 src/mv.c:456 src/shred.c:1601 msgid "missing file argument" msgstr "缺少了文件参数" #: src/cp.c:494 msgid "missing destination file" msgstr "缺少了目的地文件" #: src/cp.c:519 src/ln.c:161 src/ln.c:184 src/ln.c:211 src/ln.c:298 #, c-format msgid "accessing %s" msgstr "正在访问%s" #: src/cp.c:544 #, fuzzy, c-format msgid "%s: specified destination directory does not exist" msgstr "%s：指定的目的地不是目录" #: src/cp.c:546 #, c-format msgid "%s: specified target is not a directory" msgstr "%s：指定的目标不是目录" #: src/cp.c:549 #, c-format msgid "copying multiple files, but last argument %s is not a directory" msgstr "复制多个文件，但最后的参数%s并非目录。" #: src/cp.c:648 msgid "when preserving paths, the destination must be a directory" msgstr "当保留路径时，目的地必须是目录" #: src/cp.c:875 src/install.c:216 src/ln.c:436 src/mv.c:402 #, c-format msgid "" "warning: --version-control (-V) is obsolete; support for it\n" "will be removed in some future release. Use --backup=%s instead." msgstr "" "警告：--version-control (-V) 选项已经过时；将来的版本随时可能不再支持\n" "此选项。请使用 --backup=%s。" #: src/cp.c:969 src/ln.c:466 msgid "symbolic links are not supported on this system" msgstr "此系统并不支持符号链接" #: src/cp.c:1005 msgid "cannot make both hard and symbolic links" msgstr "无法同时创建实际及符号链接" #: src/cp.c:1013 src/install.c:272 src/ln.c:532 src/mv.c:480 msgid "backup type" msgstr "备份方式" #: src/csplit.c:40 #, fuzzy msgid "Stuart Kemp and David MacKenzie" msgstr "Mike Parker 和 David MacKenzie" #: src/csplit.c:288 src/csplit.c:1481 src/tac-pipe.c:57 src/tee.c:220 #: src/tr.c:1607 src/tr.c:1709 src/tr.c:1752 #, fuzzy msgid "read error" msgstr "写入时发生错误" #: src/csplit.c:582 msgid "input disappeared" msgstr "" #: src/csplit.c:704 src/csplit.c:715 #, fuzzy, c-format msgid "%s: line number out of range" msgstr "%s：覆盖次数无效" #: src/csplit.c:742 #, fuzzy, c-format msgid "%s: `%s': line number out of range" msgstr "%s：覆盖次数无效" #: src/csplit.c:745 src/csplit.c:791 #, c-format msgid " on repetition %d\n" msgstr "" #: src/csplit.c:787 #, c-format msgid "%s: `%s': match not found" msgstr "" #: src/csplit.c:848 src/csplit.c:888 src/tac.c:261 msgid "error in regular expression search" msgstr "" #: src/csplit.c:991 #, fuzzy, c-format msgid "write error for `%s'" msgstr "写入时发生错误" #: src/csplit.c:1063 #, c-format msgid "%s: `+' or `-' expected after delimeter" msgstr "" #: src/csplit.c:1067 #, c-format msgid "%s: integer expected after `%c'" msgstr "" #: src/csplit.c:1087 #, c-format msgid "%s: `}' is required in repeat count" msgstr "" #: src/csplit.c:1097 #, c-format msgid "%s}: integer required between `{' and `}'" msgstr "" #: src/csplit.c:1124 #, c-format msgid "%s: closing delimeter `%c' missing" msgstr "" #: src/csplit.c:1140 #, fuzzy, c-format msgid "%s: invalid regular expression: %s" msgstr "转换无效：%s" #: src/csplit.c:1173 #, fuzzy, c-format msgid "%s: invalid pattern" msgstr "%s：文件类型无效" #: src/csplit.c:1176 #, c-format msgid "%s: line number must be greater than zero" msgstr "" #: src/csplit.c:1182 #, c-format msgid "line number `%s' is smaller than preceding line number, %s" msgstr "" #: src/csplit.c:1188 #, c-format msgid "warning: line number `%s' is the same as preceding line number" msgstr "" #: src/csplit.c:1313 msgid "missing conversion specifier in suffix" msgstr "" #: src/csplit.c:1319 #, fuzzy, c-format msgid "invalid conversion specifier in suffix: %c" msgstr "转换无效：%s" #: src/csplit.c:1322 #, fuzzy, c-format msgid "invalid conversion specifier in suffix: \\%.3o" msgstr "转换无效：%s" #: src/csplit.c:1354 #, c-format msgid "missing %% conversion specification in suffix" msgstr "" #: src/csplit.c:1357 #, c-format msgid "too many %% conversion specifications in suffix" msgstr "" #: src/csplit.c:1441 #, fuzzy, c-format msgid "%s: invalid number" msgstr "无效的号码 %s" #: src/csplit.c:1496 #, fuzzy, c-format msgid "Usage: %s [OPTION]... FILE PATTERN...\n" msgstr "用法：%s [选项]... 目录...\n" #: src/csplit.c:1500 msgid "" "Output pieces of FILE separated by PATTERN(s) to files `xx01', `xx02', ...,\n" "and output byte counts of each piece to standard output.\n" "\n" msgstr "" #: src/csplit.c:1508 #, c-format msgid "" " -b, --suffix-format=FORMAT use sprintf FORMAT instead of %d\n" " -f, --prefix=PREFIX use PREFIX instead of `xx'\n" " -k, --keep-files do not remove output files on errors\n" msgstr "" #: src/csplit.c:1513 msgid "" " -n, --digits=DIGITS use specified number of digits instead of 2\n" " -s, --quiet, --silent do not print counts of output file sizes\n" " -z, --elide-empty-files remove empty output files\n" msgstr "" #: src/csplit.c:1520 msgid "" "\n" "Read standard input if FILE is -. Each PATTERN may be:\n" msgstr "" #: src/csplit.c:1524 msgid "" "\n" " INTEGER copy up to but not including specified line number\n" " /REGEXP/[OFFSET] copy up to but not including a matching line\n" " %REGEXP%[OFFSET] skip to, but not including a matching line\n" " {INTEGER} repeat the previous pattern specified number of times\n" " {*} repeat the previous pattern as many times as possible\n" "\n" "A line OFFSET is a required `+' or `-' followed by a positive integer.\n" msgstr "" #: src/cut.c:42 #, fuzzy msgid "David Ihnat, David MacKenzie, and Jim Meyering" msgstr "Mike Parker、David MacKenzie 和 Jim Meyering" #: src/cut.c:182 src/df.c:727 src/du.c:174 src/expand.c:111 src/fold.c:66 #: src/head.c:116 src/ls.c:3755 src/nl.c:176 src/paste.c:401 src/pr.c:2753 #: src/sort.c:279 src/sum.c:59 src/tac.c:126 src/tail.c:234 src/tee.c:62 #: src/unexpand.c:373 src/wc.c:135 #, c-format msgid "Usage: %s [OPTION]... [FILE]...\n" msgstr "用法：%s [选项]... [文件]...\n" #: src/cut.c:186 msgid "" "Print selected parts of lines from each FILE to standard output.\n" "\n" msgstr "" #: src/cut.c:193 msgid "" " -b, --bytes=LIST output only these bytes\n" " -c, --characters=LIST output only these characters\n" " -d, --delimiter=DELIM use DELIM instead of TAB for field delimiter\n" msgstr "" #: src/cut.c:198 #, fuzzy msgid "" " -f, --fields=LIST output only these fields; also print any line\n" " that contains no delimiter character, unless\n" " the -s option is specified\n" " -n (ignored)\n" msgstr "" " -w, --width=COLS 自行指定萤幕宽度而不使用目前的数值\n" " -x 逐行列出项目而不是逐栏列出\n" " -X 根据扩展名排序\n" " -1 每行只列出一个文件\n" #: src/cut.c:204 msgid "" " -s, --only-delimited do not print lines not containing delimiters\n" " --output-delimiter=STRING use STRING as the output delimiter\n" " the default is to use the input delimiter\n" msgstr "" #: src/cut.c:211 msgid "" "\n" "Use one, and only one of -b, -c or -f. Each LIST is made up of one\n" "range, or many ranges separated by commas. Each range is one of:\n" "\n" " N N'th byte, character or field, counted from 1\n" " N- from N'th byte, character or field, to end of line\n" " N-M from N'th to M'th (included) byte, character or field\n" " -M from first to M'th (included) byte, character or field\n" "\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" #: src/cut.c:334 src/cut.c:366 src/cut.c:452 #, fuzzy msgid "invalid byte or field list" msgstr "日期格式 %s 无效" #: src/cut.c:440 #, fuzzy, c-format msgid "byte offset %s is too large" msgstr "%s：文件过大" #: src/cut.c:443 #, fuzzy, c-format msgid "field number %s is too large" msgstr "%s：覆盖次数无效" #: src/cut.c:763 src/cut.c:771 msgid "only one type of list may be specified" msgstr "" #: src/cut.c:780 msgid "the delimiter must be a single character" msgstr "" #: src/cut.c:811 msgid "you must specify a list of bytes, characters, or fields" msgstr "" #: src/cut.c:814 msgid "an input delimiter may be specified only when operating on fields" msgstr "" #: src/cut.c:818 msgid "" "suppressing non-delimited lines makes sense\n" "\tonly when operating on fields" msgstr "" #: src/cut.c:834 #, fuzzy msgid "missing list of fields" msgstr "缺少了目的地文件" #: src/cut.c:836 #, fuzzy msgid "missing list of positions" msgstr "缺少了目的地文件" #: src/date.c:118 #, c-format msgid "" "Usage: %s [OPTION]... [+FORMAT]\n" " or: %s [-u|--utc|--universal] [MMDDhhmm[[CC]YY][.ss]]\n" msgstr "" #: src/date.c:123 msgid "" "Display the current time in the given FORMAT, or set the system date.\n" "\n" " -d, --date=STRING display time described by STRING, not `now'\n" " -f, --file=DATEFILE like --date once for each line of DATEFILE\n" " -ITIMESPEC, --iso-8601[=TIMESPEC] output date/time in ISO 8601 format.\n" " TIMESPEC=`date' for date only,\n" " `hours', `minutes', or `seconds' for date and\n" " time to the indicated precision.\n" " --iso-8601 without TIMESPEC defaults to `date'.\n" msgstr "" #: src/date.c:134 msgid "" " -r, --reference=FILE display the last modification time of FILE\n" " -R, --rfc-822 output RFC-822 compliant date string\n" " -s, --set=STRING set time described by STRING\n" " -u, --utc, --universal print or set Coordinated Universal Time\n" msgstr "" #: src/date.c:142 msgid "" "\n" "FORMAT controls the output. The only valid option for the second form\n" "specifies Coordinated Universal Time. Interpreted sequences are:\n" "\n" " %% a literal %\n" " %a locale's abbreviated weekday name (Sun..Sat)\n" msgstr "" #: src/date.c:150 msgid "" " %A locale's full weekday name, variable length (Sunday..Saturday)\n" " %b locale's abbreviated month name (Jan..Dec)\n" " %B locale's full month name, variable length (January..December)\n" " %c locale's date and time (Sat Nov 04 12:02:33 EST 1989)\n" msgstr "" #: src/date.c:156 msgid "" " %C century (year divided by 100 and truncated to an integer) [00-99]\n" " %d day of month (01..31)\n" " %D date (mm/dd/yy)\n" " %e day of month, blank padded ( 1..31)\n" msgstr "" #: src/date.c:162 msgid "" " %F same as %Y-%m-%d\n" " %g the 2-digit year corresponding to the %V week number\n" " %G the 4-digit year corresponding to the %V week number\n" msgstr "" #: src/date.c:167 msgid "" " %h same as %b\n" " %H hour (00..23)\n" " %I hour (01..12)\n" " %j day of year (001..366)\n" msgstr "" #: src/date.c:173 msgid "" " %k hour ( 0..23)\n" " %l hour ( 1..12)\n" " %m month (01..12)\n" " %M minute (00..59)\n" msgstr "" #: src/date.c:179 msgid "" " %n a newline\n" " %N nanoseconds (000000000..999999999)\n" " %p locale's upper case AM or PM indicator (blank in many locales)\n" " %P locale's lower case am or pm indicator (blank in many locales)\n" " %r time, 12-hour (hh:mm:ss [AP]M)\n" " %R time, 24-hour (hh:mm)\n" " %s seconds since `00:00:00 1970-01-01 UTC' (a GNU extension)\n" msgstr "" #: src/date.c:188 msgid "" " %S second (00..60); the 60 is necessary to accommodate a leap second\n" " %t a horizontal tab\n" " %T time, 24-hour (hh:mm:ss)\n" " %u day of week (1..7); 1 represents Monday\n" msgstr "" #: src/date.c:194 msgid "" " %U week number of year with Sunday as first day of week (00..53)\n" " %V week number of year with Monday as first day of week (01..53)\n" " %w day of week (0..6); 0 represents Sunday\n" " %W week number of year with Monday as first day of week (00..53)\n" msgstr "" #: src/date.c:200 msgid "" " %x locale's date representation (mm/dd/yy)\n" " %X locale's time representation (%H:%M:%S)\n" " %y last two digits of year (00..99)\n" " %Y year (1970...)\n" msgstr "" #: src/date.c:206 msgid "" " %z RFC-822 style numeric timezone (-0500) (a nonstandard extension)\n" " %Z time zone (e.g., EDT), or nothing if no time zone is determinable\n" "\n" "By default, date pads numeric fields with zeroes. GNU date recognizes\n" "the following modifiers between `%' and a numeric directive.\n" "\n" " `-' (hyphen) do not pad the field\n" " `_' (underscore) pad the field with spaces\n" msgstr "" #: src/date.c:238 src/dd.c:1184 src/dircolors.c:532 src/head.c:860 #: src/md5sum.c:383 src/md5sum.c:725 src/od.c:958 src/od.c:1999 src/pr.c:1163 #: src/pr.c:1370 src/pr.c:1492 src/stty.c:901 src/tac.c:482 src/tac.c:488 #: src/tee.c:151 src/tr.c:2026 src/tsort.c:585 src/wc.c:210 msgid "standard input" msgstr "标准输入" #: src/date.c:269 src/date.c:462 #, fuzzy, c-format msgid "invalid date `%s'" msgstr "无效的权限模式%s" #: src/date.c:366 #, fuzzy msgid "the options to specify dates for printing are mutually exclusive" msgstr "" "显示 dircolors 内部数据库的选项和选择 shell 语法的选项\n" "是互相抵触的" #: src/date.c:373 msgid "the options to print and set the time may not be used together" msgstr "" #: src/date.c:379 #, fuzzy, c-format msgid "too many non-option arguments: %s%s" msgstr "参数太多" #: src/date.c:387 #, c-format msgid "" "the argument `%s' lacks a leading `+';\n" "When using an option to specify date(s), any non-option\n" "argument must be a format string beginning with `+'." msgstr "" #: src/date.c:399 msgid "" "a format string may not be specified when using the --rfc-822 (-R) option" msgstr "" #: src/date.c:435 msgid "undefined" msgstr "" #: src/date.c:437 #, fuzzy msgid "cannot get time of day" msgstr "无法设定 %s 的时间标记" #: src/date.c:470 #, fuzzy msgid "cannot set date" msgstr "stat%s失败" #: src/dd.c:42 msgid "Paul Rubin, David MacKenzie, and Stuart Kemp" msgstr "Paul Rubin、David MacKenzie 及 Stuart Kemp" #: src/dd.c:287 src/tty.c:62 src/uname.c:109 src/whoami.c:51 #, c-format msgid "Usage: %s [OPTION]...\n" msgstr "用法：%s [选项]...\n" #: src/dd.c:288 msgid "" "Copy a file, converting and formatting according to the options.\n" "\n" " bs=BYTES force ibs=BYTES and obs=BYTES\n" " cbs=BYTES convert BYTES bytes at a time\n" " conv=KEYWORDS convert the file as per the comma separated keyword list\n" " count=BLOCKS copy only BLOCKS input blocks\n" " ibs=BYTES read BYTES bytes at a time\n" msgstr "" "复制文件，并根据以下的选项将数据转换和格式化。\n" "\n" " bs=字节 强迫 ibs=<字节> 及 obs=<字节>\n" " cbs=字节 每次转换指定的<字节>\n" " conv=关键字 根据以逗号分隔的关键字表示的方式来转换文件\n" " count=块数目 只复制指定<块数目>的输入数据\n" " ibs=字节 每次读取指定的<字节>\n" #: src/dd.c:297 msgid "" " if=FILE read from FILE instead of stdin\n" " obs=BYTES write BYTES bytes at a time\n" " of=FILE write to FILE instead of stdout\n" " seek=BLOCKS skip BLOCKS obs-sized blocks at start of output\n" " skip=BLOCKS skip BLOCKS ibs-sized blocks at start of input\n" msgstr "" " if=文件 读取<文件>内容而非标准输入的数据\n" " obs=字节 每次写入指定的<字节>\n" " of=文件 将数据写入<文件>而不在标准输出显示\n" " seek=块数目 先略过以 obs 为单位的指定<块数目>的输出数据\n" " skip=块数目 先略过以 ibs 为单位的指定<块数目>的输入数据\n" #: src/dd.c:306 #, fuzzy msgid "" "\n" "BLOCKS and BYTES may be followed by the following multiplicative suffixes:\n" "xM M, c 1, w 2, b 512, kB 1000, K 1024, MB 1000*1000, M 1024*1024,\n" "GB 1000*1000*1000, G 1024*1024*1024, and so on for T, P, E, Z, Y.\n" "Each KEYWORD may be:\n" "\n" msgstr "" "\n" "<块数目>和<字节>可以加上以下的单位：\n" "xM=M，c=1，w=2，b=512，kB=1000，K=1024，MB=1000000，M=1048576，\n" "GB=1000000000，G=1073741824，还有 T、P、E、Z、Y 如此类推。\n" "每个<关键字>可以是：\n" #: src/dd.c:314 msgid "" " ascii from EBCDIC to ASCII\n" " ebcdic from ASCII to EBCDIC\n" " ibm from ASCII to alternated EBCDIC\n" " block pad newline-terminated records with spaces to cbs-size\n" " unblock replace trailing spaces in cbs-size records with newline\n" " lcase change upper case to lower case\n" msgstr "" " ascii 由 EBCDIC 转换至 ASCII\n" " ebcdic 由 ASCII 转换至 EBCDIC\n" " ibm 由 ASCII 转换至 alternated EBCDIC\n" " block 将以 newline 作为结束字符的块的 newline 换成空格，直至空格\n" " 填满 cbs 表示的大小\n" " unblock 会将 cbs 大小的块中所有结束的空格删除，并转换为一个 newline 字" "符\n" " lcase 将大写字符转换为小写\n" #: src/dd.c:322 msgid "" " notrunc do not truncate the output file\n" " ucase change lower case to upper case\n" " swab swap every pair of input bytes\n" " noerror continue after read errors\n" " sync pad every input block with NULs to ibs-size; when used\n" " with block or unblock, pad with spaces rather than NULs\n" msgstr "" " notrunc 不截断输出文件\n" " ucase 将小写字符转换为大写\n" " swab 交换每一对输入数据字节\n" " noerror 读取数据发生错误后仍然继续\n" " sync 将每个输入数据块以 NUL 字符填满至 ibs 的大小；当配合 block\n" " 或 unblock 时，会以空格代替 NUL 字符填充\n" #: src/dd.c:330 msgid "" "\n" "Note that sending a SIGUSR1 signal to a running `dd' process makes it\n" "print to standard error the number of records read and written so far,\n" "then to resume copying.\n" "\n" " $ dd if=/dev/zero of=/dev/null& pid=$!\n" " $ kill -USR1 $pid; sleep 1; kill $pid\n" " 10899206+0 records in\n" " 10899206+0 records out\n" msgstr "" #: src/dd.c:372 #, c-format msgid "%s+%s records in\n" msgstr "读入了 %s+%s 个块\n" #: src/dd.c:374 #, c-format msgid "%s+%s records out\n" msgstr "输出了 %s+%s 个块\n" #: src/dd.c:381 msgid "truncated record" msgstr "个被截断了的块" #: src/dd.c:382 msgid "truncated records" msgstr "个被截断了的块" #: src/dd.c:392 #, c-format msgid "closing input file %s" msgstr "正在关闭输入文件 %s" #: src/dd.c:395 #, c-format msgid "closing output file %s" msgstr "正在关闭输出文件 %s" #: src/dd.c:479 #, c-format msgid "writing to %s" msgstr "正在写入 %s" #: src/dd.c:511 #, c-format msgid "invalid conversion: %s" msgstr "转换无效：%s" #: src/dd.c:567 #, c-format msgid "unrecognized option %s" msgstr "无法识别的选项 %s" #: src/dd.c:620 #, c-format msgid "unrecognized option %s=%s" msgstr "无法识别的选项 %s=%s" #: src/dd.c:626 #, c-format msgid "invalid number %s" msgstr "无效的号码 %s" #: src/dd.c:656 msgid "" "only one conv in {ascii,ebcdic,ibm}, {lcase,ucase}, {block,unblock}, " "{unblock,sync}" msgstr "" "每组只能选一项作为 conv 的关键字：\n" "{ascii,ebcdic,ibm}、{lcase,ucase}、{block,unblock}、{unblock,sync}" #: src/dd.c:791 #, c-format msgid "" "warning: working around lseek kernel bug for file (%s)\n" " of mt_type=0x%0lx -- see for the list of types" msgstr "" "警告：暂时避免有关文件 (%s) 的 lseek 核心错误，文件的 mt_type=0x%0lx ―\n" " 有关 mt_type 类型的列表请参考 " #: src/dd.c:1181 src/dd.c:1199 #, c-format msgid "opening %s" msgstr "打开 %s" #: src/dd.c:1207 msgid "file offset out of range" msgstr "文件偏移值超出范围以外" #: src/dd.c:1225 #, c-format msgid "advancing past %s bytes in output file %s" msgstr "略过输出文件 %2$s 的最初 %1$s 个字节" #: src/df.c:45 #, fuzzy msgid "Torbjorn Granlund, David MacKenzie, Larry McVoy, and Paul Eggert" msgstr "Torbjorn Granlund、David MacKenzie 及 Jim Meyering" #: src/df.c:149 #, fuzzy msgid "Filesystem Type" msgstr "文件系统 " #: src/df.c:151 #, fuzzy msgid "Filesystem " msgstr "文件系统 " #: src/df.c:154 #, c-format msgid " Inodes IUsed IFree IUse%%" msgstr " Inode (I)已用 (I)可用 (I)已用%%" #: src/df.c:158 #, c-format msgid " Size Used Avail Use%%" msgstr " 容量 已用 可用 已用%%" #: src/df.c:160 #, c-format msgid " Size Used Avail Use%%" msgstr " 容量 已用 可用 已用%%" #: src/df.c:163 #, fuzzy, c-format msgid " %4s-blocks Used Available Capacity" msgstr " %4d-块 已用 可用 容量" #: src/df.c:194 #, c-format msgid " %4s-blocks Used Available Use%%" msgstr " %4s-块 已用 可用 已用%%" #: src/df.c:198 msgid " Mounted on\n" msgstr " 挂载点\n" #: src/df.c:448 src/pwd.c:78 src/remove.c:987 #, fuzzy msgid "cannot get current directory" msgstr "无法创建目录%s" #: src/df.c:458 src/df.c:472 src/df.c:500 src/du.c:345 #, c-format msgid "cannot change to directory %s" msgstr "无法进入目录 %s" #: src/df.c:478 #, fuzzy, c-format msgid "cannot stat current directory (now %s)" msgstr "无法创建目录%s" #: src/df.c:728 msgid "" "Show information about the filesystem on which each FILE resides,\n" "or all filesystems by default.\n" "\n" msgstr "" "显示每个<文件>所在的文件系统的信息，默认是显示所有文件系统。\n" "\n" #: src/df.c:736 msgid "" " -a, --all include filesystems having 0 blocks\n" " -B, --block-size=SIZE use SIZE-byte blocks\n" " -h, --human-readable print sizes in human readable format (e.g., 1K 234M " "2G)\n" " -H, --si likewise, but use powers of 1000 not 1024\n" msgstr "" " -a, --all 包括大小为 0 个块的文件系统\n" " -B, --block-size=大小 块以指定<大小>的字节为单位\n" " -h, --human-readable 以容易理解的格式印出文件系统大小 (例如 1K 234M 2G)\n" " -H, --si 类似 -h，但取 1000 的次方而不是 1024\n" #: src/df.c:742 msgid "" " -i, --inodes list inode information instead of block usage\n" " -k like --block-size=1K\n" " -l, --local limit listing to local filesystems\n" " --no-sync do not invoke sync before getting usage info " "(default)\n" msgstr "" " -i, --inodes 显示 inode 信息而非块使用量\n" " -k 即 --block-size=1K\n" " -l, --local 只显示本机的文件系统\n" " --no-sync 取得使用量数据前不进行 sync 动作 (默认)\n" #: src/df.c:748 msgid "" " -P, --portability use the POSIX output format\n" " --sync invoke sync before getting usage info\n" " -t, --type=TYPE limit listing to filesystems of type TYPE\n" " -T, --print-type print filesystem type\n" " -x, --exclude-type=TYPE limit listing to filesystems not of type TYPE\n" " -v (ignored)\n" msgstr "" " -P, --portability 使用 POSIX 输出格式\n" " --sync 取得使用量数据前先进行 sync 动作\n" " -t, --type=类型 只印出指定<类型>的文件系统信息\n" " -T, --print-type 印出文件系统类型\n" " -x, --exclude-type=类型 只印出不是指定<类型>的文件系统信息\n" " -v (此选项不作处理)\n" #: src/df.c:758 src/du.c:215 src/ls.c:3873 #, fuzzy msgid "" "\n" "SIZE may be (or may be an integer optionally followed by) one of following:\n" "kB 1000, K 1024, MB 1000*1000, M 1024*1024, and so on for G, T, P, E, Z, Y.\n" msgstr "" "\n" "<大小>可以是以下的单位 (单位前可加上整数)：\n" "kB=1000，K=1024，MB=1000000，M=1048576，还有 G、T、P、E、Z、Y 如此类推。\n" #: src/df.c:876 #, c-format msgid "file system type %s both selected and excluded" msgstr "不能同时选择和排除文件系统类型 %s" #: src/df.c:921 msgid "Warning: " msgstr "警告：" #: src/df.c:924 #, c-format msgid "%scannot read table of mounted filesystems" msgstr "%s无法读取已挂上的文件系统的名单" #: src/dircolors.c:104 #, c-format msgid "Usage: %s [OPTION]... [FILE]\n" msgstr "用法：%s [选项]... [文件]\n" #: src/dircolors.c:105 msgid "" "Output commands to set the LS_COLORS environment variable.\n" "\n" "Determine format of output:\n" " -b, --sh, --bourne-shell output Bourne shell code to set LS_COLORS\n" " -c, --csh, --c-shell output C shell code to set LS_COLORS\n" " -p, --print-database output defaults\n" msgstr "" "输出用来设定 LS_COLORS 环境变量的命令。\n" "\n" "指定输出的规格：\n" " -b, --sh, --bourne-shell 输出设定 LS_COLORS 的 Bourne shell 命令\n" " -c, --csh, --c-shell 输出设定 LS_COLORS 的 C shell 命令\n" " -p, --print-database 输出默认的色彩设置\n" #: src/dircolors.c:115 msgid "" "\n" "If FILE is specified, read it to determine which colors to use for which\n" "file types and extensions. Otherwise, a precompiled database is used.\n" "For details on the format of these files, run `dircolors --print-database'.\n" msgstr "" "\n" "如果指定<文件>，则读取该文件的数据来决定文件类型及扩展名相应的颜色。\n" "否则，会使用一个默认的数据库。如要了解此文件格式的细节，请执行\n" "‘dircolors --print-database’。\n" #: src/dircolors.c:291 #, c-format msgid "%s:%lu: invalid line; missing second token" msgstr "%s：%lu：此行无效；缺少了第二栏数据" #: src/dircolors.c:363 #, c-format msgid "%s:%lu: unrecognized keyword %s" msgstr "%s：%lu：无法识别的关键字 %s" #: src/dircolors.c:364 msgid "" msgstr "<内部数据>" #: src/dircolors.c:460 msgid "" "the options to output dircolors' internal database and\n" "to select a shell syntax are mutually exclusive" msgstr "" "显示 dircolors 内部数据库的选项和选择 shell 语法的选项\n" "是互相抵触的" #: src/dircolors.c:468 msgid "" "no FILE arguments may be used with the option to output\n" "dircolors' internal database" msgstr "显示 dircolors 内部数据库时不能加上<文件>参数" #: src/dircolors.c:497 msgid "no SHELL environment variable, and no shell type option given" msgstr "没有设定 SHELL 环境变量，也没有指定 shell 类型的选项" #: src/dirname.c:32 src/head.c:47 src/pathchk.c:53 #, fuzzy msgid "David MacKenzie and Jim Meyering" msgstr "Mike Parker、David MacKenzie 和 Jim Meyering" #: src/dirname.c:45 #, fuzzy, c-format msgid "" "Usage: %s NAME\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/dirname.c:50 msgid "" "Print NAME with its trailing /component removed; if NAME contains no /'s,\n" "output `.' (meaning the current directory).\n" "\n" msgstr "" #: src/du.c:49 #, fuzzy msgid "" "Torbjorn Granlund, David MacKenzie, Larry McVoy, Paul Eggert, and Jim " "Meyering" msgstr "Torbjorn Granlund、David MacKenzie 及 Jim Meyering" #: src/du.c:175 msgid "" "Summarize disk usage of each FILE, recursively for directories.\n" "\n" msgstr "" "总结每个<文件>的磁盘用量，目录则取总用量。\n" "\n" #: src/du.c:182 #, fuzzy msgid "" " -a, --all write counts for all files, not just directories\n" " --apparent-size print apparent sizes, rather than disk usage; " "although\n" " the apparent size is usually smaller, it may be\n" " larger due to holes in (`sparse') files, internal\n" " fragmentation, indirect blocks, and the like\n" " -B, --block-size=SIZE use SIZE-byte blocks\n" " -b, --bytes equivalent to `--apparent-size --block-size=1'\n" " -c, --total produce a grand total\n" " -D, --dereference-args dereference FILEs that are symbolic links\n" msgstr "" " -a, --all 显示目录中所有文件的占用量，并非只是目录的总用量\n" " -B, --block-size=大小 块以指定<大小>的字节为单位\n" " -b, --bytes 以字节为单位印出占用量\n" " -c, --total 印出所有项目相加后的总用量\n" " -D, --dereference-args 只找出命令列中的符号链接指示的真正目的地\n" #: src/du.c:193 msgid "" " -h, --human-readable print sizes in human readable format (e.g., 1K 234M " "2G)\n" " -H, --si likewise, but use powers of 1000 not 1024\n" " -k like --block-size=1K\n" " -l, --count-links count sizes many times if hard linked\n" msgstr "" " -h, --human-readable 以容易理解的格式印出文件大小 (例如 1K 234M 2G)\n" " -H, --si 类似 -h，但取 1000 的次方而不是 1024\n" " -k 即 --block-size=1K\n" " -l, --count-links 连硬链接的大小也计算在内\n" #: src/du.c:199 msgid "" " -L, --dereference dereference all symbolic links\n" " -S, --separate-dirs do not include size of subdirectories\n" " -s, --summarize display only a total for each argument\n" msgstr "" " -L, --dereference 找出任何符号链接指示的真正目的地\n" " -S, --separate-dirs 不包括子目录的占用量\n" " -s, --summarize 只分别计算命令列中每个参数所占的总用量\n" #: src/du.c:204 #, fuzzy msgid "" " -x, --one-file-system skip directories on different filesystems\n" " -X FILE, --exclude-from=FILE Exclude files that match any pattern in " "FILE.\n" " --exclude=PATTERN Exclude files that match PATTERN.\n" " --max-depth=N print the total for a directory (or file, with --" "all)\n" " only if it is N or fewer levels below the command\n" " line argument; --max-depth=0 is the same as\n" " --summarize\n" msgstr "" " -x, --one-file-system 略过属於其他文件系统的目录\n" " -X 文件, --exclude-from=文件 由<文件>读取应排除的文件的样式\n" " --exclude=PAT 排除符合指定<样式>的文件\n" " --max-depth=N 只显示参数指定的目录 N 层或以内的子目录的总用量\n" " (若使用 --all 选项，也会显示文件的占用量)；\n" " --max-depth=0 的效果等於 --summarize\n" #: src/du.c:337 #, fuzzy, c-format msgid "cannot change to parent of directory %s" msgstr "无法进入目录 %s" #: src/du.c:352 #, fuzzy, c-format msgid "cannot read directory %s" msgstr "无法创建目录%s" #: src/du.c:554 src/ls.c:2233 src/wc.c:674 msgid "total" msgstr "总用量" #: src/du.c:642 #, c-format msgid "invalid maximum depth %s" msgstr "目录最大深度 %s 无效" #: src/du.c:708 msgid "cannot both summarize and show all entries" msgstr "不能只显示总用量，同时又显示每个项目" #: src/du.c:715 msgid "warning: summarizing is the same as using --max-depth=0" msgstr "警告：显示总用量等於使用 --max-depth=0" #: src/du.c:721 #, c-format msgid "warning: summarizing conflicts with --max-depth=%d" msgstr "警告：显示总用量的选项和 --max-depth=%d 互相抵触" #: src/echo.c:76 #, fuzzy, c-format msgid "Usage: %s [OPTION]... [STRING]...\n" msgstr "用法：%s [选项]... [文件]...\n" #: src/echo.c:77 msgid "" "Echo the STRING(s) to standard output.\n" "\n" " -n do not output the trailing newline\n" " -e enable interpretation of the backslash-escaped characters\n" " listed below\n" " -E disable interpretation of those sequences in STRINGs\n" msgstr "" #: src/echo.c:87 msgid "" "\n" "Without -E, the following sequences are recognized and interpolated:\n" "\n" " \\NNN the character whose ASCII code is NNN (octal)\n" " \\\\ backslash\n" " \\a alert (BEL)\n" " \\b backspace\n" msgstr "" #: src/echo.c:96 msgid "" " \\c suppress trailing newline\n" " \\f form feed\n" " \\n new line\n" " \\r carriage return\n" " \\t horizontal tab\n" " \\v vertical tab\n" msgstr "" #: src/env.c:92 #, fuzzy msgid "Richard Mlynarik and David MacKenzie" msgstr "Richard Stallman 和 David MacKenzie" #: src/env.c:118 #, fuzzy, c-format msgid "Usage: %s [OPTION]... [-] [NAME=VALUE]... [COMMAND [ARG]...]\n" msgstr "用法：%s [选项]... 名称 类型 [MAJOR MINOR]\n" #: src/env.c:121 msgid "" "Set each NAME to VALUE in the environment and run COMMAND.\n" "\n" " -i, --ignore-environment start with an empty environment\n" " -u, --unset=NAME remove variable from the environment\n" msgstr "" #: src/env.c:129 msgid "" "\n" "A mere - implies -i. If no COMMAND, print the resulting environment.\n" msgstr "" #: src/expand.c:115 msgid "" "Convert tabs in each FILE to spaces, writing to standard output.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/expand.c:123 msgid "" " -i, --initial do not convert TABs after non whitespace\n" " -t, --tabs=NUMBER have tabs NUMBER characters apart, not 8\n" msgstr "" #: src/expand.c:127 msgid "" " -t, --tabs=LIST use comma separated list of explicit tab positions\n" msgstr "" #: src/expand.c:184 #, fuzzy, c-format msgid "tab stop is too large %s" msgstr "%s：文件过大" #: src/expand.c:193 #, fuzzy, c-format msgid "tab size contains invalid character(s): %s" msgstr "权限模式字串 %2$s 中出现无效的字符 %1$s" #: src/expand.c:218 src/unexpand.c:169 msgid "tab size cannot be 0" msgstr "" #: src/expand.c:220 src/unexpand.c:171 msgid "tab sizes must be ascending" msgstr "" #: src/expand.c:414 msgid "`-LIST' option is obsolete; use `-t LIST'" msgstr "" #: src/expr.c:103 #, fuzzy, c-format msgid "" "Usage: %s EXPRESSION\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/expr.c:111 msgid "" "\n" "Print the value of EXPRESSION to standard output. A blank line below\n" "separates increasing precedence groups. EXPRESSION may be:\n" "\n" " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" "\n" " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" msgstr "" #: src/expr.c:120 msgid "" "\n" " ARG1 < ARG2 ARG1 is less than ARG2\n" " ARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" " ARG1 = ARG2 ARG1 is equal to ARG2\n" " ARG1 != ARG2 ARG1 is unequal to ARG2\n" " ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" " ARG1 > ARG2 ARG1 is greater than ARG2\n" msgstr "" #: src/expr.c:129 msgid "" "\n" " ARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" " ARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" msgstr "" #: src/expr.c:134 #, c-format msgid "" "\n" " ARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" " ARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" " ARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" msgstr "" #: src/expr.c:140 msgid "" "\n" " STRING : REGEXP anchored pattern match of REGEXP in STRING\n" "\n" " match STRING REGEXP same as STRING : REGEXP\n" " substr STRING POS LENGTH substring of STRING, POS counted from 1\n" " index STRING CHARS index in STRING where any CHARS is found, or 0\n" " length STRING length of STRING\n" msgstr "" #: src/expr.c:149 msgid "" " + TOKEN interpret TOKEN as a string, even if it is a\n" " keyword like `match' or an operator like `/'\n" "\n" " ( EXPRESSION ) value of EXPRESSION\n" msgstr "" #: src/expr.c:155 msgid "" "\n" "Beware that many operators need to be escaped or quoted for shells.\n" "Comparisons are arithmetic if both ARGs are numbers, else lexicographical.\n" "Pattern matches return the string matched between \\( and \\) or null; if\n" "\\( and \\) are not used, they return the number of characters matched or " "0.\n" msgstr "" #: src/expr.c:171 #, fuzzy msgid "syntax error" msgstr "写入时发生错误" #: src/expr.c:408 #, c-format msgid "" "warning: unportable BRE: `%s': using `^' as the first character\n" "of the basic regular expression is not portable; it is being ignored" msgstr "" #: src/expr.c:610 src/expr.c:649 #, fuzzy msgid "non-numeric argument" msgstr "参数数目错误" #: src/expr.c:616 msgid "division by zero" msgstr "" #: src/factor.c:73 #, fuzzy, c-format msgid "" "Usage: %s [NUMBER]...\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/factor.c:78 msgid "" "Print the prime factors of each NUMBER.\n" "\n" msgstr "" #: src/factor.c:84 msgid "" "\n" " Print the prime factors of all specified integer NUMBERs. If no " "arguments\n" " are specified on the command line, they are read from standard input.\n" msgstr "" #: src/factor.c:153 #, c-format msgid "`%s' is not a valid positive integer" msgstr "" #: src/false.c:32 #, c-format msgid "" "Usage: %s [ignored command line arguments]\n" " or: %s OPTION\n" "Exit with a status code indicating failure.\n" "\n" "These option names may not be abbreviated.\n" "\n" msgstr "" #: src/fmt.c:271 #, fuzzy, c-format msgid "Usage: %s [-DIGITS] [OPTION]... [FILE]...\n" msgstr "用法：%s [选项]... [文件]...\n" #: src/fmt.c:272 msgid "" "Reformat each paragraph in the FILE(s), writing to standard output.\n" "If no FILE or if FILE is `-', read standard input.\n" "\n" msgstr "" #: src/fmt.c:280 msgid "" " -c, --crown-margin preserve indentation of first two lines\n" " -p, --prefix=STRING combine only lines having STRING as prefix\n" " -s, --split-only split long lines, but do not refill\n" msgstr "" #: src/fmt.c:286 msgid "" " -t, --tagged-paragraph indentation of first line different from second\n" " -u, --uniform-spacing one space between words, two after sentences\n" " -w, --width=WIDTH maximum line width (default of 75 columns)\n" msgstr "" #: src/fmt.c:351 #, fuzzy, c-format msgid "invalid width option: %s" msgstr "无效的行宽数值：%s" #: src/fmt.c:367 #, c-format msgid "" "invalid option -- %c; -WIDTH is recognized only when it is the first\n" "option; use -w N instead" msgstr "" #: src/fmt.c:393 #, fuzzy, c-format msgid "invalid width: %s" msgstr "无效的行宽数值：%s" #: src/fold.c:70 msgid "" "Wrap input lines in each FILE (standard input by default), writing to\n" "standard output.\n" "\n" msgstr "" #: src/fold.c:78 msgid "" " -b, --bytes count bytes rather than columns\n" " -s, --spaces break at spaces\n" " -w, --width=WIDTH use WIDTH columns instead of 80\n" msgstr "" #: src/fold.c:267 #, c-format msgid "`%s' option is obsolete; use `%s'" msgstr "" #: src/fold.c:295 #, fuzzy, c-format msgid "invalid number of columns: `%s'" msgstr "无效的号码 %s" #: src/head.c:120 msgid "" "Print the first 10 lines of each FILE to standard output.\n" "With more than one FILE, precede each with a header giving the file name.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/head.c:129 msgid "" " -c, --bytes=[-]N print the first N bytes of each file;\n" " with the leading `-', print all but the last\n" " N bytes of each file\n" " -n, --lines=[-]N print the first N lines instead of the first 10;\n" " with the leading `-', print all but the last\n" " N lines of each file\n" msgstr "" #: src/head.c:137 msgid "" " -q, --quiet, --silent never print headers giving file names\n" " -v, --verbose always print headers giving file names\n" msgstr "" #: src/head.c:143 msgid "" "\n" "N may have a multiplier suffix: b 512, k 1024, m 1024*1024.\n" msgstr "" #: src/head.c:158 src/head.c:271 src/head.c:343 src/head.c:550 src/head.c:632 #: src/head.c:704 src/head.c:769 src/head.c:797 src/tail.c:361 src/tail.c:442 #: src/tail.c:491 src/tail.c:583 src/tail.c:708 src/tail.c:756 src/tail.c:795 #: src/tail.c:1273 src/tail.c:1309 src/uniq.c:378 #, fuzzy, c-format msgid "error reading %s" msgstr "正在读入%s" #: src/head.c:161 src/uniq.c:383 #, fuzzy, c-format msgid "error writing %s" msgstr "正在写入%s" #: src/head.c:164 #, c-format msgid "%s: file has shrunk too much" msgstr "" #: src/head.c:237 #, fuzzy, c-format msgid "%s: number of bytes is large" msgstr "参数数目错误" #: src/head.c:455 #, fuzzy, c-format msgid "%s: cannot lseek back to original position" msgstr "无法创建 fifo 文件%s" #: src/head.c:625 src/head.c:696 src/tail.c:392 #, fuzzy, c-format msgid "%s: cannot seek to offset %s" msgstr "无法 lseek%s" #: src/head.c:814 #, fuzzy, c-format msgid "cannot reposition file pointer for %s" msgstr "无法取得 %s 的时间标记" #: src/head.c:898 src/tail.c:1433 #, c-format msgid "%s: %s is so large that it is not representable" msgstr "" #: src/head.c:899 src/tail.c:1435 #, fuzzy msgid "number of lines" msgstr "参数数目错误" #: src/head.c:899 src/tail.c:1436 #, fuzzy msgid "number of bytes" msgstr "参数数目错误" #: src/head.c:906 src/tail.c:1522 #, fuzzy msgid "invalid number of lines" msgstr "无效的号码 %s" #: src/head.c:907 src/tail.c:1523 #, fuzzy msgid "invalid number of bytes" msgstr "无效的号码 %s" #: src/head.c:994 #, fuzzy, c-format msgid "unrecognized option `-%c'" msgstr "无法识别的选项 %s" #: src/head.c:1001 #, c-format msgid "`-%s' option is obsolete; use `-%c %.*s%.*s%s'" msgstr "" #: src/head.c:1077 #, fuzzy, c-format msgid "%s: number of bytes is too large" msgstr "%s：覆盖次数无效" #: src/hostid.c:44 #, c-format msgid "" "Usage: %s\n" " or: %s OPTION\n" "Print the numeric identifier (in hexadecimal) for the current host.\n" "\n" msgstr "" #: src/hostname.c:66 #, c-format msgid "" "Usage: %s [NAME]\n" " or: %s OPTION\n" "Print or set the hostname of the current system.\n" "\n" msgstr "" #: src/hostname.c:104 #, fuzzy, c-format msgid "cannot set hostname to `%s'" msgstr "无法设定 %s 的时间标记" #: src/hostname.c:110 msgid "cannot set hostname; this system lacks the functionality" msgstr "" #: src/hostname.c:117 #, fuzzy msgid "cannot determine hostname" msgstr "无法设定 %s 的权限" #: src/id.c:35 #, fuzzy msgid "Arnold Robbins and David MacKenzie" msgstr "Richard Stallman 和 David MacKenzie" #: src/id.c:86 #, fuzzy, c-format msgid "Usage: %s [OPTION]... [USERNAME]\n" msgstr "用法：%s [选项]... [文件]\n" #: src/id.c:87 msgid "" "Print information for USERNAME, or the current user.\n" "\n" " -a ignore, for compatibility with other versions\n" " -g, --group print only the effective group ID\n" " -G, --groups print all group IDs\n" " -n, --name print a name instead of a number, for -ugG\n" " -r, --real print the real ID instead of the effective ID, with -ugG\n" " -u, --user print only the effective user ID\n" msgstr "" #: src/id.c:99 msgid "" "\n" "Without any OPTION, print some useful set of identified information.\n" msgstr "" #: src/id.c:162 #, fuzzy msgid "cannot print only user and only group" msgstr "不可同时省略用户和所属组" #: src/id.c:166 msgid "cannot print only names or real IDs in default format" msgstr "" #: src/id.c:175 #, c-format msgid "%s: No such user" msgstr "" #: src/id.c:212 #, c-format msgid "cannot find name for user ID %u" msgstr "" #: src/id.c:235 #, fuzzy, c-format msgid "cannot find name for group ID %u" msgstr "无法更改%s的所有者及/或组" #: src/id.c:273 #, fuzzy msgid "cannot get supplemental group list" msgstr "无法改变所属组至没有名称的组" #: src/id.c:385 msgid " groups=" msgstr "" #: src/install.c:266 msgid "the strip option may not be used when installing a directory" msgstr "安装目录时不能用 strip 选项" #: src/install.c:289 src/mkdir.c:141 #, c-format msgid "invalid mode %s" msgstr "无效的权限模式%s" #: src/install.c:304 src/install.c:368 #, c-format msgid "creating directory %s" msgstr "正在创建目录%s" #: src/install.c:329 #, c-format msgid "installing multiple files, but last argument, %s is not a directory" msgstr "正在安装多个文件，但最后的参数 %s 并非目录。" #: src/install.c:432 #, c-format msgid "%s is a directory" msgstr "%s是目录" #: src/install.c:468 #, fuzzy, c-format msgid "cannot change ownership of %s" msgstr "无法更改%s的权限" #: src/install.c:492 #, c-format msgid "cannot obtain time stamps for %s" msgstr "无法取得 %s 的时间标记" #: src/install.c:504 #, c-format msgid "cannot set time stamps for %s" msgstr "无法设定 %s 的时间标记" #: src/install.c:525 msgid "fork system call failed" msgstr "fork 系统进程出现错误" #: src/install.c:529 msgid "cannot run strip" msgstr "无法执行 strip 命令" #: src/install.c:536 msgid "strip failed" msgstr "strip 出现错误" #: src/install.c:557 #, c-format msgid "invalid user %s" msgstr "无效的用户 %s" #: src/install.c:575 #, c-format msgid "invalid group %s" msgstr "无效的组 %s" #: src/install.c:594 #, c-format msgid "" "Usage: %s [OPTION]... SOURCE DEST (1st format)\n" " or: %s [OPTION]... SOURCE... DIRECTORY (2nd format)\n" " or: %s -d [OPTION]... DIRECTORY... (3rd format)\n" msgstr "" "用法：%s [选项]... 来源 目的地 (第一种格式)\n" " 或：%s [选项]... 来源... 目录 (第二种格式)\n" " 或：%s -d [选项]... 目录... (第三种格式)\n" #: src/install.c:600 msgid "" "In the first two formats, copy SOURCE to DEST or multiple SOURCE(s) to\n" "the existing DIRECTORY, while setting permission modes and owner/group.\n" "In the third format, create all components of the given DIRECTORY(ies).\n" "\n" msgstr "" "在最初两种格式中，会将<来源>复制至<目的地>或将多个<来源>文件复制至已存在的\n" "<目录>，同时设定权限模式及所有者/所属组。在第三种格式中，会创建所有\n" "指定的目录及它们的主目录。\n" "\n" #: src/install.c:609 msgid "" " --backup[=CONTROL] make a backup of each existing destination file\n" " -b like --backup but does not accept an argument\n" " -c (ignored)\n" " -d, --directory treat all arguments as directory names; create all\n" " components of the specified directories\n" msgstr "" " --backup[=CONTROL] 为每个已存在的目的地文件进行备份\n" " -b 类似 --backup，但不接受任何参数\n" " -c (此选项不作处理)\n" " -d, --directory 所有参数都作为目录处理；而且会创建指定目录的所有主目" "录\n" #: src/install.c:616 msgid "" " -D create all leading components of DEST except the " "last,\n" " then copy SOURCE to DEST; useful in the 1st format\n" " -g, --group=GROUP set group ownership, instead of process' current " "group\n" " -m, --mode=MODE set permission mode (as in chmod), instead of rwxr-xr-" "x\n" " -o, --owner=OWNER set ownership (super-user only)\n" msgstr "" " -D 创建<目的地>前的所有主目录，然后将<来源>复制至\n" " <目的地>；在第一种使用格式中有用\n" " -g, --group=组 自行设定所属组，而不是进程目前的所属组\n" " -m, --mode=模式 自行设定权限模式 (像 chmod)，而不是 rwxr-xr-x\n" " -o, --owner=所有者 自行设定所有者 (只适用於超级用户)\n" #: src/install.c:623 msgid "" " -p, --preserve-timestamps apply access/modification times of SOURCE " "files\n" " to corresponding destination files\n" " -s, --strip strip symbol tables, only for 1st and 2nd formats\n" " -S, --suffix=SUFFIX override the usual backup suffix\n" " -v, --verbose print the name of each directory as it is created\n" msgstr "" " -p, --preserve-timestamps 以<来源>文件的访问/修改时间作为相应的目的\n" " 地文件的时间属性\n" " -s, --strip 用 strip 命令删除 symbol table，只适用於第一及第二种\n" " 使用格式\n" " -S, --suffix=后缀 自行指定备份文件的<后缀>\n" " -v, --verbose 处理每个文件/目录时印出名称\n" #: src/install.c:632 src/ln.c:378 src/mv.c:344 msgid "" "\n" "The backup suffix is `~', unless set with --suffix or SIMPLE_BACKUP_SUFFIX.\n" "The version control method may be selected via the --backup option or " "through\n" "the VERSION_CONTROL environment variable. Here are the values:\n" "\n" msgstr "" "\n" "备份文件的后缀为‘~’，除非以 --suffix 选项或是 SIMPLE_BACKUP_SUFFIX\n" "环境变量指定。版本控制的方式可透过 --backup 选项或 VERSION_CONTROL 环境\n" "变量来选择。以下是可用的变量值：\n" "\n" #: src/join.c:143 #, fuzzy, c-format msgid "Usage: %s [OPTION]... FILE1 FILE2\n" msgstr "用法：%s [选项]... [文件]\n" #: src/join.c:147 msgid "" "For each pair of input lines with identical join fields, write a line to\n" "standard output. The default join field is the first, delimited\n" "by whitespace. When FILE1 or FILE2 (not both) is -, read standard input.\n" "\n" " -a FILENUM print unpairable lines coming from file FILENUM, where\n" " FILENUM is 1 or 2, corresponding to FILE1 or FILE2\n" " -e EMPTY replace missing input fields with EMPTY\n" msgstr "" #: src/join.c:156 msgid "" " -i, --ignore-case ignore differences in case when comparing fields\n" " -j FIELD (obsolescent) equivalent to `-1 FIELD -2 FIELD'\n" " -j1 FIELD (obsolescent) equivalent to `-1 FIELD'\n" " -j2 FIELD (obsolescent) equivalent to `-2 FIELD'\n" " -o FORMAT obey FORMAT while constructing output line\n" " -t CHAR use CHAR as input and output field separator\n" msgstr "" #: src/join.c:164 msgid "" " -v FILENUM like -a FILENUM, but suppress joined output lines\n" " -1 FIELD join on this FIELD of file 1\n" " -2 FIELD join on this FIELD of file 2\n" msgstr "" #: src/join.c:171 msgid "" "\n" "Unless -t CHAR is given, leading blanks separate fields and are ignored,\n" "else fields are separated by CHAR. Any FIELD is a field number counted\n" "from 1. FORMAT is one or more comma or blank separated specifications,\n" "each being `FILENUM.FIELD' or `0'. Default FORMAT outputs the join field,\n" "the remaining fields from FILE1, the remaining fields from FILE2, all\n" "separated by CHAR.\n" msgstr "" #: src/join.c:644 #, fuzzy, c-format msgid "invalid field specifier: `%s'" msgstr "无效的 tab 字符定位值：%s" #: src/join.c:658 src/join.c:772 src/join.c:808 #, fuzzy, c-format msgid "invalid field number: `%s'" msgstr "无效的号码 %s" #: src/join.c:671 #, fuzzy, c-format msgid "invalid file number in field spec: `%s'" msgstr "无效的号码 %s" #: src/join.c:792 #, fuzzy, c-format msgid "invalid field number for file 1: `%s'" msgstr "无效的号码 %s" #: src/join.c:801 #, fuzzy, c-format msgid "invalid field number for file 2: `%s'" msgstr "无效的号码 %s" #: src/join.c:833 #, fuzzy msgid "too many non-option arguments" msgstr "参数太多" #: src/join.c:855 #, fuzzy msgid "too few non-option arguments" msgstr "参数太少" #: src/join.c:866 msgid "both files cannot be standard input" msgstr "" #: src/kill.c:94 #, c-format msgid "" "Usage: %s [-s SIGNAL | -SIGNAL] PID...\n" " or: %s -l [SIGNAL]...\n" " or: %s -t [SIGNAL]...\n" msgstr "" #: src/kill.c:100 msgid "" "Send signals to processes, or list signals.\n" "\n" msgstr "" #: src/kill.c:107 msgid "" " -s, --signal=SIGNAL, -SIGNAL\n" " specify the name or number of the signal to be sent\n" " -l, --list list signal names, or convert signal names to/from " "numbers\n" " -t, --table print a table of signal information\n" msgstr "" #: src/kill.c:115 msgid "" "\n" "SIGNAL may be a signal name like `HUP', or a signal number like `1',\n" "or an exit status of a process terminated by a signal.\n" "PID is an integer; if negative it identifies a process group.\n" msgstr "" #: src/kill.c:164 #, fuzzy, c-format msgid "%s: invalid signal" msgstr "%s：文件类型无效" #: src/kill.c:269 #, fuzzy, c-format msgid "%s: invalid process id" msgstr "%s：文件大小无效" #: src/kill.c:323 #, fuzzy, c-format msgid "invalid option -- %c" msgstr "%s：无效的选项 ― %c\n" #: src/kill.c:332 #, c-format msgid "%s: multiple signals specified" msgstr "" #: src/kill.c:346 msgid "multiple -l or -t options specified" msgstr "" #: src/kill.c:363 msgid "cannot combine signal with -l or -t" msgstr "" #: src/kill.c:369 msgid "no process ID specified" msgstr "" #: src/link.c:51 #, c-format msgid "" "Usage: %s FILE1 FILE2\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件1 文件2\n" " 或：%s 选项\n" #: src/link.c:54 msgid "" "Call the link function to create a link named FILE2 to an existing FILE1.\n" "\n" msgstr "" #: src/link.c:99 #, c-format msgid "cannot create link %s to %s" msgstr "无法创建连至%2$s的链接%1$s" #: src/ln.c:35 msgid "Mike Parker and David MacKenzie" msgstr "Mike Parker 和 David MacKenzie" #: src/ln.c:168 #, c-format msgid "%s: warning: making a hard link to a symbolic link is not portable" msgstr "%s：警告：将硬链接连至符号链接是不通用的功能" #: src/ln.c:175 #, c-format msgid "%s: hard link not allowed for directory" msgstr "%s: 不允许将硬链接连至目录" #: src/ln.c:247 #, c-format msgid "%s: cannot overwrite directory" msgstr "%s：无法覆盖目录" #: src/ln.c:252 #, c-format msgid "%s: replace %s? " msgstr "%s：是否置换%s? " #: src/ln.c:258 #, c-format msgid "%s: File exists" msgstr "%s：文件已存在" #: src/ln.c:305 #, c-format msgid "create symbolic link %s to %s" msgstr "创建连至%2$s的符号链接%1$s" #: src/ln.c:306 #, c-format msgid "create hard link %s to %s" msgstr "创建连至%2$s的硬链接%1$s" #: src/ln.c:320 #, c-format msgid "creating symbolic link %s to %s" msgstr "正在创建连至%2$s的符号链接%1$s" #: src/ln.c:321 #, c-format msgid "creating hard link %s to %s" msgstr "正在创建连至%2$s的硬链接%1$s" #: src/ln.c:340 #, c-format msgid "" "Usage: %s [OPTION]... TARGET [LINK_NAME]\n" " or: %s [OPTION]... TARGET... DIRECTORY\n" " or: %s [OPTION]... --target-directory=DIRECTORY TARGET...\n" msgstr "" "用法：%s [选项]... 目标 [链接名]\n" " 或：%s [选项]... 目标... 目录\n" " 或：%s [选项]... --target-directory=目录 目标...\n" #: src/ln.c:346 msgid "" "Create a link to the specified TARGET with optional LINK_NAME.\n" "If LINK_NAME is omitted, a link with the same basename as the TARGET is\n" "created in the current directory. When using the second form with more\n" "than one TARGET, the last argument must be a directory; create links\n" "in DIRECTORY to each TARGET. Create hard links by default, symbolic\n" "links with --symbolic. When creating hard links, each TARGET must exist.\n" "\n" msgstr "" "创建连至指定<目标>的链接，并可选择性指定<链接名>。\n" "如果没有指定<链接名>，会在目前的目录中创建一个和<目标>名称一样的链接。\n" "当使用第二种格式而<目标>多於一个时，最后的参数必须是目录；这样会在指定的\n" "<目录>中分别创建连至每个<目标>的链接。默认会创建硬链接，若\n" "使用 --symbolic 选项则创建符号链接。当创建硬链接时，每个<目标>都必须存\n" "在。\n" "\n" #: src/ln.c:358 msgid "" " --backup[=CONTROL] make a backup of each existing destination " "file\n" " -b like --backup but does not accept an argument\n" " -d, -F, --directory hard link directories (super-user only)\n" " -f, --force remove existing destination files\n" msgstr "" " --backup[=CONTROL] 为每个已存在的目的地文件创建备份文件\n" " -b 类似 --backup，但不接受任何参数\n" " -d, -F, --directory 创建连至目录的硬链接 (只适用於超级用户)\n" " -f, --force 强迫删除任何已存在的目的地文件\n" #: src/ln.c:364 msgid "" " -n, --no-dereference treat destination that is a symlink to a\n" " directory as if it were a normal file\n" " -i, --interactive prompt whether to remove destinations\n" " -s, --symbolic make symbolic links instead of hard links\n" msgstr "" " -n, --no-dereference 如果目的地是一个链接至某目录的符号链接，会将\n" " 该符号链接当作一般文件处理，先将该已存在的\n" " 链接备份或删除\n" " -i, --interactive 确认是否删除目的地文件\n" " -s, --symbolic 创建符号链接而不是硬链接\n" #: src/ln.c:370 msgid "" " -S, --suffix=SUFFIX override the usual backup suffix\n" " --target-directory=DIRECTORY specify the DIRECTORY in which to " "create\n" " the links\n" " -v, --verbose print name of each file before linking\n" msgstr "" " -S, --suffix=后缀 自行指定备份文件的<后缀>\n" " --target-directory=目录 在指定<目录>中创建链接\n" " -v, --verbose 链接前先印出每个文件的名称\n" #: src/ln.c:523 #, c-format msgid "%s: specified target directory is not a directory" msgstr "%s：指定的目的地不是目录" #: src/ln.c:544 msgid "when making multiple links, last argument must be a directory" msgstr "创建多个链接时，最后的参数必须为目录" #: src/logname.c:48 src/pwd.c:45 src/sync.c:44 #, c-format msgid "Usage: %s [OPTION]\n" msgstr "用法：%s [选项]\n" #: src/logname.c:49 msgid "" "Print the name of the current user.\n" "\n" msgstr "" #: src/logname.c:104 msgid "no login name" msgstr "" #: src/ls.c:664 msgid "%b %e %Y" msgstr "%Y-%m-%d " #: src/ls.c:672 msgid "%b %e %H:%M" msgstr "%b %e %H:%M" #: src/ls.c:1299 #, fuzzy, c-format msgid "ignoring invalid value of environment variable QUOTING_STYLE: %s" msgstr "忽略无效的环境变量 QUOTING_STYLE 的变量值：%s" #: src/ls.c:1326 #, c-format msgid "ignoring invalid width in environment variable COLUMNS: %s" msgstr "忽略无效的环境变量 COLUMNS 的宽度数值：%s" #: src/ls.c:1357 #, c-format msgid "ignoring invalid tab size in environment variable TABSIZE: %s" msgstr "忽略无效的环境变量 TABSIZE 的 tab 字符定位值：%s" #: src/ls.c:1474 #, c-format msgid "invalid line width: %s" msgstr "无效的行宽数值：%s" #: src/ls.c:1548 #, c-format msgid "invalid tab size: %s" msgstr "无效的 tab 字符定位值：%s" #: src/ls.c:1714 #, c-format msgid "invalid time style format %s" msgstr "无效的日期时间格式 %s" #: src/ls.c:2046 #, c-format msgid "unrecognized prefix: %s" msgstr "无法识别的文件种类：%s" #: src/ls.c:2069 msgid "unparsable value for LS_COLORS environment variable" msgstr "LS_COLORS 环境变量中存在无法分析的值" #: src/ls.c:2137 #, c-format msgid "cannot determine device and inode of %s" msgstr "无法决定 %s 所在的设备及 inode" #: src/ls.c:2147 #, c-format msgid "not listing already-listed directory: %s" msgstr "不会再列出已经列出的目录：%s" #: src/ls.c:2200 src/remove.c:945 #, fuzzy, c-format msgid "reading directory %s" msgstr "正在创建目录%s" #: src/ls.c:2595 #, c-format msgid "cannot compare file names %s and %s" msgstr "无法比较文件名 %s 和 %s" #: src/ls.c:3756 msgid "" "List information about the FILEs (the current directory by default).\n" "Sort entries alphabetically if none of -cftuSUX nor --sort.\n" "\n" msgstr "" "列出<文件>的信息 (默认为目前的目录)。\n" "如果不指定 -cftuSUX 或 --sort 任何一个选项，则根据字母大小排序。\n" "\n" #: src/ls.c:3764 msgid "" " -a, --all do not hide entries starting with .\n" " -A, --almost-all do not list implied . and ..\n" " --author print the author of each file\n" " -b, --escape print octal escapes for nongraphic characters\n" msgstr "" " -a, --all 不隐藏任何以 . 字符开始的项目\n" " -A, --almost-all 列出除了 . 及 .. 以外的任何项目\n" " --author 印出每个文件著作者\n" " -b, --escape 以八进制溢出序列表示不可打印的字符\n" #: src/ls.c:3770 msgid "" " --block-size=SIZE use SIZE-byte blocks\n" " -B, --ignore-backups do not list implied entries ending with ~\n" " -c with -lt: sort by, and show, ctime (time of " "last\n" " modification of file status information)\n" " with -l: show ctime and sort by name\n" " otherwise: sort by ctime\n" msgstr "" " --block-size=大小 块以指定<大小>的字节为单位\n" " -B, --ignore-backups 不列出任何以 ~ 字符结束的项目\n" " -c 配合 -lt：根据 ctime 排序及显示 ctime (文件\n" " 状态最后更改的时间)\n" " 配合 -l：显示 ctime 但根据名称排序\n" " 否则：根据 ctime 排序\n" #: src/ls.c:3778 #, fuzzy msgid "" " -C list entries by columns\n" " --color[=WHEN] control whether color is used to distinguish " "file\n" " types. WHEN may be `never', `always', or " "`auto'\n" " -d, --directory list directory entries instead of contents,\n" " and do not dereference symbolic links\n" " -D, --dired generate output designed for Emacs' dired mode\n" msgstr "" " -C 每栏由上至下列出项目\n" " --color[=WHEN] 控制是否使用色彩分辨文件。WHEN 可以是\n" " ‘never’、‘always’或‘auto’其中之一\n" " -d, --directory 当遇到目录时列出目录本身而非目录内的文件\n" " -D, --dired 产生适合 Emacs 的 dired 模式使用的结果\n" #: src/ls.c:3786 msgid "" " -f do not sort, enable -aU, disable -lst\n" " -F, --classify append indicator (one of */=@|) to entries\n" " --format=WORD across -x, commas -m, horizontal -x, long -l,\n" " single-column -1, verbose -l, vertical -C\n" " --full-time like -l --time-style=full-iso\n" msgstr "" " -f 不进行排序，-aU 选项生效，-lst 选项失效\n" " -F, --classify 加上文件类型的指示符号 (*/=@| 其中一个)\n" " --format=关键字 across -x，commas -m，horizontal -x，long -l，\n" " single-column -1，verbose -l，vertical -C\n" " --full-time 即 -l --time-style=full-iso\n" #: src/ls.c:3793 #, fuzzy msgid "" " -g like -l, but do not list owner\n" " -G, --no-group inhibit display of group information\n" " -h, --human-readable print sizes in human readable format (e.g., 1K 234M " "2G)\n" " --si likewise, but use powers of 1000 not 1024\n" " -H, --dereference-command-line\n" " follow symbolic links listed on the command " "line\n" " --dereference-command-line-symlink-to-dir\n" " follow each command line symbolic link\n" " that points to a directory\n" msgstr "" " -g 类似 -l，但不列出所有者\n" " -G, --no-group 不列出任何有关组的信息\n" " -h, --human-readable 以容易理解的格式印出文件大小 (例如 1K 234M 2G)\n" " --si 类似 -h，但取 1000 的次方而不是 1024\n" " -H, --dereference-command-line 使用命令列中的符号链接指示的真正目的地\n" #: src/ls.c:3804 msgid "" " --indicator-style=WORD append indicator with style WORD to entry " "names:\n" " none (default), classify (-F), file-type (-" "p)\n" " -i, --inode print index number of each file\n" " -I, --ignore=PATTERN do not list implied entries matching shell " "PATTERN\n" " -k like --block-size=1K\n" msgstr "" " --indicator-style=方式 指定在每个项目名称后加上指示符号<方式>：\n" " none (默认)，classify (-F)，file-type (-p)\n" " -i, --inode 印出每个文件的 inode 号\n" " -I, --ignore=样式 不印出任何符合 shell 万用字符<样式>的项目\n" " -k 即 --block-size=1K\n" #: src/ls.c:3811 msgid "" " -l use a long listing format\n" " -L, --dereference when showing file information for a symbolic\n" " link, show information for the file the link\n" " references rather than for the link itself\n" " -m fill width with a comma separated list of " "entries\n" msgstr "" " -l 使用较长格式列出信息\n" " -L, --dereference 当显示符号链接的文件信息时，显示符号链接所指示\n" " 的对象而并非符号链接本身的信息\n" " -m 所有项目以逗号分隔，并填满整行行宽\n" #: src/ls.c:3818 msgid "" " -n, --numeric-uid-gid like -l, but list numeric UIDs and GIDs\n" " -N, --literal print raw entry names (don't treat e.g. " "control\n" " characters specially)\n" " -o like -l, but do not list group information\n" " -p, --file-type append indicator (one of /=@|) to entries\n" msgstr "" " -n, --numeric-uid-gid 类似 -l，但列出 UID 及 GID 号\n" " -N, --literal 印出未经处理的项目名称 (例如不特别处理控制字" "符)\n" " -o 类似 -l，但不列出有关组的信息\n" " -p, --file-type 加上文件类型的指示符号 (/=@| 其中一个)\n" #: src/ls.c:3825 msgid "" " -q, --hide-control-chars print ? instead of non graphic characters\n" " --show-control-chars show non graphic characters as-is (default\n" " unless program is `ls' and output is a " "terminal)\n" " -Q, --quote-name enclose entry names in double quotes\n" " --quoting-style=WORD use quoting style WORD for entry names:\n" " literal, locale, shell, shell-always, c, " "escape\n" msgstr "" " -q, --hide-control-chars 以 ? 字符代替无法打印的字符\n" " --show-control-chars 直接显示无法打印的字符 (这是默认方式，除非调用\n" " 的程序名称是‘ls’而且是在终端机画面输出结果)\n" " -Q, --quote-name 将项目名称括上双引号\n" " --quoting-style=方式 使用指定的 quoting <方式>显示项目的名称：\n" " literal、locale、shell、shell-always、c、" "escape\n" #: src/ls.c:3833 msgid "" " -r, --reverse reverse order while sorting\n" " -R, --recursive list subdirectories recursively\n" " -s, --size print size of each file, in blocks\n" msgstr "" " -r, --reverse 依相反次序排列\n" " -R, --recursive 同时列出所有子目录层\n" " -s, --size 以块大小为单位列出所有文件的大小\n" #: src/ls.c:3838 #, fuzzy msgid "" " -S sort by file size\n" " --sort=WORD extension -X, none -U, size -S, time -t,\n" " version -v\n" " status -c, time -t, atime -u, access -u, use -" "u\n" " --time=WORD show time as WORD instead of modification " "time:\n" " atime, access, use, ctime or status; use\n" " specified time as sort key if --sort=time\n" msgstr "" " -S 根据文件大小排序\n" " --sort=WORD 以下是可选用的 WORD 和它们代表的相应选项：\n" " extension -X status -c\n" " none -U time -t\n" " size -S atime -u\n" " time -t access -u\n" " version -v use -u\n" " --time=WORD 显示 WORD 所代表的时间而非修改时间：\n" " atime、access、use、ctime 或 status；加上\n" " --sort=time 选项时会以指定时间作为排序索引\n" #: src/ls.c:3847 #, fuzzy msgid "" " --time-style=STYLE show times using style STYLE:\n" " full-iso, long-iso, iso, locale, +FORMAT\n" " FORMAT is interpreted like `date'; if FORMAT " "is\n" " FORMAT1FORMAT2, FORMAT1 applies to\n" " non-recent files and FORMAT2 to recent files;\n" " if STYLE is prefixed with `posix-', STYLE\n" " takes effect only outside the POSIX locale\n" " -t sort by modification time\n" " -T, --tabsize=COLS assume tab stops at each COLS instead of 8\n" msgstr "" " --time-style=WORD 根据 WORD 代表的格式显示时间：\n" " full-iso、iso、locale、posix-iso、+FORMAT\n" " FORMAT 即是‘date’所用的时间格式；如果 FORMAT\n" " 是 FORMAT1FORMAT2，FORMAT1 适用於较旧\n" " 的文件而 FORMAT2 适用於较新的文件\n" " -t 根据修改时间排序\n" " -T, --tabsize=宽度 自行指定 tab 的<宽度>，而非 8 个字符\n" #: src/ls.c:3858 msgid "" " -u with -lt: sort by, and show, access time\n" " with -l: show access time and sort by name\n" " otherwise: sort by access time\n" " -U do not sort; list entries in directory order\n" " -v sort by version\n" msgstr "" " -u 配合 -lt：显示访问时间而且依访问时间排序\n" " 配合 -l：显示访问时间但根据名称排序\n" " 否则：根据访问时间排序\n" " -U 不进行排序；依文件系统原有的次序列出项目\n" " -v 根据版本进行排序\n" #: src/ls.c:3865 msgid "" " -w, --width=COLS assume screen width instead of current value\n" " -x list entries by lines instead of by columns\n" " -X sort alphabetically by entry extension\n" " -1 list one file per line\n" msgstr "" " -w, --width=COLS 自行指定萤幕宽度而不使用目前的数值\n" " -x 逐行列出项目而不是逐栏列出\n" " -X 根据扩展名排序\n" " -1 每行只列出一个文件\n" #: src/ls.c:3877 msgid "" "\n" "By default, color is not used to distinguish types of files. That is\n" "equivalent to using --color=none. Using the --color option without the\n" "optional WHEN argument is equivalent to using --color=always. With\n" "--color=auto, color codes are output only if standard output is connected\n" "to a terminal (tty).\n" msgstr "" "\n" "默认是不会使用色彩来区别文件的。此方式等於使用了 --color=none 选项。若使用\n" "--color 选项但不指定 WHEN 参数等於 --color=always。当使用 --color=auto 时，\n" "只当输出至终端机画面 (tty) 时才会显示色彩。\n" #: src/md5sum.c:37 msgid "Ulrich Drepper and Scott Miller" msgstr "" #: src/md5sum.c:124 #, c-format msgid "" "Usage: %s [OPTION] [FILE]...\n" " or: %s [OPTION] --check [FILE]\n" "Print or check %s (%d-bit) checksums.\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" #: src/md5sum.c:133 #, c-format msgid "" "\n" " -b, --binary read files in binary mode (default on DOS/" "Windows)\n" " -c, --check check %s sums against given list\n" " -t, --text read files in text mode (default)\n" "\n" msgstr "" #: src/md5sum.c:141 msgid "" "The following two options are useful only when verifying checksums:\n" " --status don't output anything, status code shows success\n" " -w, --warn warn about improperly formated checksum lines\n" "\n" msgstr "" #: src/md5sum.c:149 #, c-format msgid "" "\n" "The sums are computed as described in %s. When checking, the input\n" "should be a former output of this program. The default mode is to print\n" "a line with checksum, a character indicating type (`*' for binary, ` ' for\n" "text), and name for each FILE.\n" msgstr "" #: src/md5sum.c:428 #, c-format msgid "%s: %lu: improperly formatted %s checksum line" msgstr "" #: src/md5sum.c:450 #, c-format msgid "%s: FAILED open or read\n" msgstr "" #: src/md5sum.c:474 msgid "FAILED" msgstr "" #: src/md5sum.c:474 msgid "OK" msgstr "" #: src/md5sum.c:487 #, fuzzy, c-format msgid "%s: read error" msgstr "%s：名称已更改为 %s" #: src/md5sum.c:500 #, c-format msgid "%s: no properly formatted %s checksum lines found" msgstr "" #: src/md5sum.c:513 #, c-format msgid "WARNING: %d of %d listed %s could not be read" msgstr "" #: src/md5sum.c:516 msgid "file" msgstr "" #: src/md5sum.c:516 msgid "files" msgstr "" #: src/md5sum.c:522 #, c-format msgid "WARNING: %d of %d computed %s did NOT match" msgstr "" #: src/md5sum.c:525 msgid "checksum" msgstr "" #: src/md5sum.c:525 msgid "checksums" msgstr "" #: src/md5sum.c:608 msgid "" "the --binary and --text options are meaningless when verifying checksums" msgstr "" #: src/md5sum.c:616 msgid "the --string and --check options are mutually exclusive" msgstr "" #: src/md5sum.c:623 msgid "the --status option is meaningful only when verifying checksums" msgstr "" #: src/md5sum.c:630 msgid "the --warn option is meaningful only when verifying checksums" msgstr "" #: src/md5sum.c:640 msgid "no files may be specified when using --string" msgstr "" #: src/md5sum.c:662 msgid "only one argument may be specified when using --check" msgstr "" #: src/mkdir.c:61 #, c-format msgid "Usage: %s [OPTION] DIRECTORY...\n" msgstr "用法：%s [选项] 目录...\n" #: src/mkdir.c:62 msgid "" "Create the DIRECTORY(ies), if they do not already exist.\n" "\n" msgstr "" "若目录不是已经存在则创建目录。\n" "\n" #: src/mkdir.c:69 msgid "" " -m, --mode=MODE set permission mode (as in chmod), not rwxrwxrwx - " "umask\n" " -p, --parents no error if existing, make parent directories as needed\n" " -v, --verbose print a message for each created directory\n" msgstr "" " -m, --mode=模式 设定权限<模式> (类似 chmod)，而不是 rwxrwxrwx 减 umask\n" " -p, --parents 需要时创建上层目录，如目录早已存在则不当作错误\n" " -v, --verbose 每次创建新目录都显示信息\n" #: src/mkdir.c:114 #, c-format msgid "created directory %s" msgstr "已创建目录 %s" #: src/mkdir.c:191 #, c-format msgid "cannot set permissions of directory %s" msgstr "无法设定目录 %s 的权限" #: src/mkfifo.c:55 #, c-format msgid "Usage: %s [OPTION] NAME...\n" msgstr "用法：%s [选项] 名称...\n" #: src/mkfifo.c:56 msgid "" "Create named pipes (FIFOs) with the given NAMEs.\n" "\n" msgstr "" "以指定的<名称>创建 named pipe (FIFO)。\n" "\n" #: src/mkfifo.c:63 src/mknod.c:64 msgid "" " -m, --mode=MODE set permission mode (as in chmod), not a=rw - umask\n" msgstr " -m, --mode=模式 指定权限模式 (类似 chmod)，而不是 a=rw 减 umask\n" #: src/mkfifo.c:94 src/mknod.c:207 msgid "fifo files not supported" msgstr "不支持 FIFO 文件" #: src/mkfifo.c:124 src/mknod.c:128 msgid "invalid mode" msgstr "权限模式无效" #: src/mkfifo.c:143 #, c-format msgid "cannot set permissions of fifo %s" msgstr "无法设定 fifo 文件 %s 的权限" #: src/mknod.c:55 #, c-format msgid "Usage: %s [OPTION]... NAME TYPE [MAJOR MINOR]\n" msgstr "用法：%s [选项]... 名称 类型 [MAJOR MINOR]\n" #: src/mknod.c:57 msgid "" "Create the special file NAME of the given TYPE.\n" "\n" msgstr "" "创建指定<类型>和<名称>的特殊文件。\n" "\n" #: src/mknod.c:69 msgid "" "\n" "Both MAJOR and MINOR must be specified when TYPE is b, c, or u, and they\n" "must be omitted when TYPE is p. If MAJOR or MINOR begins with 0x or 0X,\n" "it is interpreted as hexadecimal; otherwise, if it begins with 0, as octal;\n" "otherwise, as decimal. TYPE may be:\n" msgstr "" #: src/mknod.c:76 #, fuzzy msgid "" "\n" " b create a block (buffered) special file\n" " c, u create a character (unbuffered) special file\n" " p create a FIFO\n" msgstr "" "\n" "当<类型>为 p 时不可指定 MAJOR 及 MINOR，否则它们是必须指定的。\n" "<类型>可以是：\n" "\n" " b 创建(有缓冲的)区块特殊文件\n" " c, u 创建(没有缓冲的)字符特殊文件\n" " p 创建 FIFO 特殊文件\n" #: src/mknod.c:142 msgid "wrong number of arguments" msgstr "参数数目错误" #: src/mknod.c:154 msgid "block special files not supported" msgstr "本系统不支持区块特殊文件" #: src/mknod.c:163 msgid "character special files not supported" msgstr "本系统不支持字符特殊文件" #: src/mknod.c:172 msgid "" "when creating special files, major and minor device\n" "numbers must be specified" msgstr "创建区块特殊文件时，必需指定 major 和 minor 设备号" #: src/mknod.c:187 #, c-format msgid "invalid major device number %s" msgstr "无效的 major 设备号 %s" #: src/mknod.c:192 #, c-format msgid "invalid minor device number %s" msgstr "无效的 minor 设备号 %s" #: src/mknod.c:197 #, c-format msgid "invalid device %s %s" msgstr "设备文件 %s %s 无效" #: src/mknod.c:211 msgid "major and minor device numbers may not be specified for fifo files" msgstr "不能为 fifo 文件指定 major 和 minor 设备号" #: src/mknod.c:221 #, fuzzy, c-format msgid "invalid device type %s" msgstr "设备文件 %s %s 无效" #: src/mknod.c:232 #, c-format msgid "cannot set permissions of %s" msgstr "无法设定 %s 的权限" #: src/mv.c:40 msgid "Mike Parker, David MacKenzie, and Jim Meyering" msgstr "Mike Parker、David MacKenzie 和 Jim Meyering" #: src/mv.c:313 msgid "" "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n" "\n" msgstr "" "将<来源>名称重命名为<目的地>名称，或将<来源>文件移动至<目录>。\n" "\n" #: src/mv.c:320 msgid "" " --backup[=CONTROL] make a backup of each existing destination " "file\n" " -b like --backup but does not accept an " "argument\n" " -f, --force do not prompt before overwriting\n" " equivalent to --reply=yes\n" " -i, --interactive prompt before overwrite\n" " equivalent to --reply=query\n" msgstr "" " --backup[=CONTROL] 为每个已存在的目的地文件创建备份文件\n" " -b 类似 --backup，但不接受任何参数\n" " -f, --force 覆盖文件前不会进行确认，等於 --reply=yes\n" " -i, --interactive 覆盖文件前必须先确认，等於 --reply=query\n" #: src/mv.c:328 msgid "" " --reply={yes,no,query} specify how to handle the prompt about an\n" " existing destination file\n" " --strip-trailing-slashes remove any trailing slashes from each SOURCE\n" " argument\n" " -S, --suffix=SUFFIX override the usual backup suffix\n" msgstr "" " --reply={yes,no,query} 指定如何处理已存在的目的地文件\n" " --strip-trailing-slashes 删除参数中所有<来源>文件/目录末端的斜杠\n" " -S, --suffix=后缀 自行指定备份文件的<后缀>\n" #: src/mv.c:335 msgid "" " --target-directory=DIRECTORY move all SOURCE arguments into " "DIRECTORY\n" " -u, --update move only when the SOURCE file is newer\n" " than the destination file or when the\n" " destination file is missing\n" " -v, --verbose explain what is being done\n" msgstr "" " --target-directory=目录 将所有参数指定的<来源>文件/目录移动至<目录>\n" " -u, --update 只在<来源>文件比目的地文件新，或目的地文件\n" " 不存在时才会移动\n" " -v, --verbose 详细显示进行的步骤\n" #: src/mv.c:464 #, c-format msgid "specified target, %s is not a directory" msgstr "指定的目标%s不是目录" #: src/mv.c:472 msgid "when moving multiple files, last argument must be a directory" msgstr "移动多个文件时，最后的参数必须为目录。" #: src/nice.c:65 #, fuzzy, c-format msgid "Usage: %s [OPTION] [COMMAND [ARG]...]\n" msgstr "用法：%s [选项] 名称...\n" #: src/nice.c:66 msgid "" "Run COMMAND with an adjusted scheduling priority.\n" "With no COMMAND, print the current scheduling priority. ADJUST is 10\n" "by default. Range goes from -20 (highest priority) to 19 (lowest).\n" "\n" " -n, --adjustment=ADJUST increment priority by ADJUST first\n" msgstr "" #: src/nice.c:108 src/nice.c:121 #, fuzzy, c-format msgid "invalid option `%s'" msgstr "无效的组 %s" #: src/nice.c:146 #, fuzzy, c-format msgid "invalid priority `%s'" msgstr "无效的组 %s" #: src/nice.c:170 msgid "a command must be given with an adjustment" msgstr "" #: src/nice.c:177 src/nice.c:186 #, fuzzy msgid "cannot get priority" msgstr "无法进入目录 %s" #: src/nice.c:191 #, fuzzy msgid "cannot set priority" msgstr "无法设定 %s 的权限" #: src/nl.c:39 #, fuzzy msgid "Scott Bartram and David MacKenzie" msgstr "Richard Stallman 和 David MacKenzie" #: src/nl.c:180 msgid "" "Write each FILE to standard output, with line numbers added.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/nl.c:188 msgid "" " -b, --body-numbering=STYLE use STYLE for numbering body lines\n" " -d, --section-delimiter=CC use CC for separating logical pages\n" " -f, --footer-numbering=STYLE use STYLE for numbering footer lines\n" msgstr "" #: src/nl.c:193 msgid "" " -h, --header-numbering=STYLE use STYLE for numbering header lines\n" " -i, --page-increment=NUMBER line number increment at each line\n" " -l, --join-blank-lines=NUMBER group of NUMBER empty lines counted as " "one\n" " -n, --number-format=FORMAT insert line numbers according to FORMAT\n" " -p, --no-renumber do not reset line numbers at logical " "pages\n" " -s, --number-separator=STRING add STRING after (possible) line number\n" msgstr "" #: src/nl.c:201 msgid "" " -v, --first-page=NUMBER first line number on each logical page\n" " -w, --number-width=NUMBER use NUMBER columns for line numbers\n" msgstr "" #: src/nl.c:207 msgid "" "\n" "By default, selects -v1 -i1 -l1 -sTAB -w6 -nrn -hn -bt -fn. CC are\n" "two delimiter characters for separating logical pages, a missing\n" "second character implies :. Type \\\\ for \\. STYLE is one of:\n" msgstr "" #: src/nl.c:213 msgid "" "\n" " a number all lines\n" " t number only nonempty lines\n" " n number no lines\n" " pREGEXP number only lines that contain a match for REGEXP\n" "\n" "FORMAT is one of:\n" "\n" " ln left justified, no leading zeros\n" " rn right justified, no leading zeros\n" " rz right justified, leading zeros\n" "\n" msgstr "" #: src/nl.c:491 #, fuzzy, c-format msgid "invalid header numbering style: %s" msgstr "无效的号码 %s" #: src/nl.c:499 #, fuzzy, c-format msgid "invalid body numbering style: %s" msgstr "无效的号码 %s" #: src/nl.c:507 #, fuzzy, c-format msgid "invalid footer numbering style: %s" msgstr "无效的号码 %s" #: src/nl.c:519 #, fuzzy, c-format msgid "invalid starting line number: %s" msgstr "无效的 major 设备号 %s" #: src/nl.c:535 #, fuzzy, c-format msgid "invalid line number increment: %s" msgstr "无效的行宽数值：%s" #: src/nl.c:554 #, fuzzy, c-format msgid "invalid number of blank lines: %s" msgstr "%s：覆盖次数无效" #: src/nl.c:573 #, fuzzy, c-format msgid "invalid line number field width: %s" msgstr "无效的行宽数值：%s" #: src/nl.c:592 #, fuzzy, c-format msgid "invalid line numbering format: %s" msgstr "无效的行宽数值：%s" #: src/nohup.c:56 #, fuzzy, c-format msgid "" "Usage: %s COMMAND [ARG]...\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/nohup.c:62 msgid "" "Run COMMAND, ignoring hangup signals.\n" "\n" msgstr "" #: src/nohup.c:124 src/nohup.c:125 #, fuzzy, c-format msgid "failed to open %s" msgstr "无法保留%s的时间" #: src/nohup.c:133 #, fuzzy msgid "failed to redirect standard output" msgstr "标准输出" #: src/nohup.c:135 #, fuzzy, c-format msgid "appending output to %s" msgstr "正在更改 %s 的所属组" #: src/nohup.c:154 msgid "failed to redirect standard error" msgstr "" #: src/nohup.c:190 src/setuidgid.c:132 #, fuzzy, c-format msgid "cannot run command %s" msgstr "无法解除%s的链接" #: src/od.c:286 #, fuzzy, c-format msgid "" "Usage: %s [OPTION]... [FILE]...\n" " or: %s --traditional [FILE] [[+]OFFSET [[+]LABEL]]\n" msgstr "" "用法：%s [选项]... 组 文件...\n" " 或：%s [选项]... --reference=参考文件 文件...\n" #: src/od.c:291 msgid "" "\n" "Write an unambiguous representation, octal bytes by default,\n" "of FILE to standard output. With more than one FILE argument,\n" "concatenate them in the listed order to form the input.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/od.c:298 #, fuzzy msgid "All arguments to long options are mandatory for short options.\n" msgstr "长选项必须用的参数在使用短选项时也是必须的。\n" #: src/od.c:301 msgid "" " -A, --address-radix=RADIX decide how file offsets are printed\n" " -j, --skip-bytes=BYTES skip BYTES input bytes first\n" msgstr "" #: src/od.c:305 msgid "" " -N, --read-bytes=BYTES limit dump to BYTES input bytes\n" " -s, --strings[=BYTES] output strings of at least BYTES graphic " "chars\n" " -t, --format=TYPE select output format or formats\n" " -v, --output-duplicates do not use * to mark line suppression\n" " -w, --width[=BYTES] output BYTES bytes per output line\n" " --traditional accept arguments in traditional form\n" msgstr "" #: src/od.c:315 msgid "" "\n" "Traditional format specifications may be intermixed; they accumulate:\n" " -a same as -t a, select named characters\n" " -b same as -t oC, select octal bytes\n" " -c same as -t c, select ASCII characters or backslash escapes\n" " -d same as -t u2, select unsigned decimal shorts\n" msgstr "" #: src/od.c:323 msgid "" " -f same as -t fF, select floats\n" " -h same as -t x2, select hexadecimal shorts\n" " -i same as -t d2, select decimal shorts\n" " -l same as -t d4, select decimal longs\n" " -o same as -t o2, select octal shorts\n" " -x same as -t x2, select hexadecimal shorts\n" msgstr "" #: src/od.c:331 msgid "" "\n" "For older syntax (second call format), OFFSET means -j OFFSET. LABEL\n" "is the pseudo-address at first byte printed, incremented when dump is\n" "progressing. For OFFSET and LABEL, a 0x or 0X prefix indicates\n" "hexadecimal, suffixes may be . for octal and b for multiply by 512.\n" "\n" "TYPE is made up of one or more of these specifications:\n" "\n" " a named character\n" " c ASCII character or backslash escape\n" msgstr "" #: src/od.c:343 msgid "" " d[SIZE] signed decimal, SIZE bytes per integer\n" " f[SIZE] floating point, SIZE bytes per integer\n" " o[SIZE] octal, SIZE bytes per integer\n" " u[SIZE] unsigned decimal, SIZE bytes per integer\n" " x[SIZE] hexadecimal, SIZE bytes per integer\n" msgstr "" #: src/od.c:350 msgid "" "\n" "SIZE is a number. For TYPE in doux, SIZE may also be C for\n" "sizeof(char), S for sizeof(short), I for sizeof(int) or L for\n" "sizeof(long). If TYPE is f, SIZE may also be F for sizeof(float), D\n" "for sizeof(double) or L for sizeof(long double).\n" msgstr "" #: src/od.c:357 msgid "" "\n" "RADIX is d for decimal, o for octal, x for hexadecimal or n for none.\n" "BYTES is hexadecimal with 0x or 0X prefix, it is multiplied by 512\n" "with b suffix, by 1024 with k and by 1048576 with m. Adding a z suffix to\n" "any type adds a display of printable characters to the end of each line\n" "of output. " msgstr "" #: src/od.c:365 msgid "" "--string without a number implies 3. --width without a number\n" "implies 32. By default, od uses -A o -t d2 -w 16.\n" msgstr "" #: src/od.c:721 src/od.c:843 #, fuzzy, c-format msgid "invalid type string `%s'" msgstr "权限模式字串无效：%s " #: src/od.c:731 #, c-format msgid "" "invalid type string `%s';\n" "this system doesn't provide a %lu-byte integral type" msgstr "" #: src/od.c:853 #, c-format msgid "" "invalid type string `%s';\n" "this system doesn't provide a %lu-byte floating point type" msgstr "" #: src/od.c:916 #, fuzzy, c-format msgid "invalid character `%c' in type string `%s'" msgstr "权限模式字串 %2$s 中出现无效的字符 %1$s" #: src/od.c:1141 msgid "cannot skip past end of combined input" msgstr "" #: src/od.c:1394 msgid "old-style offset" msgstr "" #: src/od.c:1705 #, c-format msgid "invalid output address radix `%c'; it must be one character from [doxn]" msgstr "" #: src/od.c:1715 #, fuzzy msgid "skip argument" msgstr "缺少了文件参数" #: src/od.c:1723 #, fuzzy msgid "limit argument" msgstr "有效的参数为：" #: src/od.c:1733 msgid "minimum string length" msgstr "" #: src/od.c:1738 src/od.c:1804 #, fuzzy, c-format msgid "%s is too large" msgstr "%s：文件过大" #: src/od.c:1802 msgid "width specification" msgstr "" #: src/od.c:1824 msgid "no type may be specified when dumping strings" msgstr "" #: src/od.c:1872 #, c-format msgid "invalid second operand in compatibility mode `%s'" msgstr "" #: src/od.c:1893 msgid "in compatibility mode, the last two arguments must be offsets" msgstr "" #: src/od.c:1900 msgid "compatibility mode supports at most three arguments" msgstr "" #: src/od.c:1921 #, fuzzy msgid "skip-bytes + read-bytes is too large" msgstr "%s：覆盖次数无效" #: src/od.c:1973 #, c-format msgid "warning: invalid width %lu; using %d instead" msgstr "" #: src/od.c:1989 #, c-format msgid "%d: fmt=\"%s\" width=%d\n" msgstr "" #: src/paste.c:49 #, fuzzy msgid "David M. Ihnat and David MacKenzie" msgstr "Mike Parker 和 David MacKenzie" #: src/paste.c:206 #, fuzzy msgid "standard input is closed" msgstr "标准输入" #: src/paste.c:405 msgid "" "Write lines consisting of the sequentially corresponding lines from\n" "each FILE, separated by TABs, to standard output.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/paste.c:414 msgid "" " -d, --delimiters=LIST reuse characters from LIST instead of TABs\n" " -s, --serial paste one file at a time instead of in parallel\n" msgstr "" #: src/pathchk.c:140 #, fuzzy, c-format msgid "Usage: %s [OPTION]... NAME...\n" msgstr "用法：%s [选项] 名称...\n" #: src/pathchk.c:141 msgid "" "Diagnose unportable constructs in NAME.\n" "\n" " -p, --portability check for all POSIX systems, not only this one\n" msgstr "" #: src/pathchk.c:232 #, c-format msgid "path `%s' contains nonportable character `%c'" msgstr "" #: src/pathchk.c:252 #, fuzzy, c-format msgid "`%s' is not a directory" msgstr "%s是目录" #: src/pathchk.c:263 #, c-format msgid "directory `%s' is not searchable" msgstr "" #: src/pathchk.c:350 #, c-format msgid "name `%s' has length %ld; exceeds limit of %ld" msgstr "" #: src/pathchk.c:376 #, c-format msgid "path `%s' has length %lu; exceeds limit of %ld" msgstr "" #: src/pinky.c:34 src/uptime.c:38 #, fuzzy msgid "Joseph Arceneaux, David MacKenzie, and Kaveh Ghazi" msgstr "Mike Parker、David MacKenzie 和 Jim Meyering" #: src/pinky.c:291 msgid "Login name: " msgstr "" #: src/pinky.c:294 msgid "In real life: " msgstr "" #: src/pinky.c:297 msgid "???\n" msgstr "" #: src/pinky.c:317 #, fuzzy msgid "Directory: " msgstr "目录" #: src/pinky.c:319 msgid "Shell: " msgstr "" #: src/pinky.c:340 msgid "Project: " msgstr "" #: src/pinky.c:366 msgid "Plan:\n" msgstr "" #: src/pinky.c:385 msgid "Login" msgstr "" #: src/pinky.c:387 msgid "Name" msgstr "" #: src/pinky.c:388 msgid " TTY" msgstr "" #: src/pinky.c:390 msgid "Idle" msgstr "" #: src/pinky.c:391 msgid "When" msgstr "" #: src/pinky.c:394 msgid "Where" msgstr "" #: src/pinky.c:468 #, fuzzy, c-format msgid "Usage: %s [OPTION]... [USER]...\n" msgstr "用法：%s [选项]... [文件]...\n" #: src/pinky.c:469 msgid "" "\n" " -l produce long format output for the specified USERs\n" " -b omit the user's home directory and shell in long format\n" " -h omit the user's project file in long format\n" " -p omit the user's plan file in long format\n" " -s do short format output, this is the default\n" msgstr "" #: src/pinky.c:477 msgid "" " -f omit the line of column headings in short format\n" " -w omit the user's full name in short format\n" " -i omit the user's full name and remote host in short format\n" " -q omit the user's full name, remote host and idle time\n" " in short format\n" msgstr "" #: src/pinky.c:486 #, c-format msgid "" "\n" "A lightweight `finger' program; print user information.\n" "The utmp file will be %s.\n" msgstr "" #: src/pinky.c:574 msgid "no username specified; at least one must be specified when using -l" msgstr "" #: src/pr.c:326 msgid "Pete TerMaat and Roland Huebner" msgstr "" #: src/pr.c:803 #, fuzzy, c-format msgid "`--pages' invalid range of page numbers: `%s'" msgstr "无效的组代号 %s" #: src/pr.c:815 #, c-format msgid "`--pages' invalid starting page number: `%s'" msgstr "" #: src/pr.c:827 #, fuzzy, c-format msgid "`--pages' invalid ending page number: `%s'" msgstr "无效的组代号 %s" #: src/pr.c:834 msgid "`--pages' starting page number is larger than ending page number" msgstr "" #: src/pr.c:910 msgid "`--pages=FIRST_PAGE[:LAST_PAGE]' missing argument" msgstr "" #: src/pr.c:921 #, c-format msgid "`--columns=COLUMN' invalid number of columns: `%s'" msgstr "" #: src/pr.c:975 #, c-format msgid "`-l PAGE_LENGTH' invalid number of lines: `%s'" msgstr "" #: src/pr.c:999 #, fuzzy, c-format msgid "`-N NUMBER' invalid starting line number: `%s'" msgstr "无效的 minor 设备号 %s" #: src/pr.c:1011 #, fuzzy, c-format msgid "`-o MARGIN' invalid line offset: `%s'" msgstr "无效的行宽数值：%s" #: src/pr.c:1052 #, c-format msgid "`-w PAGE_WIDTH' invalid number of characters: `%s'" msgstr "" #: src/pr.c:1064 #, c-format msgid "`-W PAGE_WIDTH' invalid number of characters: `%s'" msgstr "" #: src/pr.c:1078 #, fuzzy msgid "%b %e %H:%M %Y" msgstr "%b %e %H:%M" #: src/pr.c:1087 msgid "Cannot specify number of columns when printing in parallel." msgstr "" #: src/pr.c:1091 msgid "Cannot specify both printing across and printing in parallel." msgstr "" #: src/pr.c:1187 #, c-format msgid "`-%c' extra characters or invalid number in the argument: `%s'" msgstr "" #: src/pr.c:1298 msgid "page width too narrow" msgstr "" #: src/pr.c:2361 #, c-format msgid "starting page number larger than total number of pages: `%d'" msgstr "" #: src/pr.c:2392 #, c-format msgid "Page %d" msgstr "" #: src/pr.c:2758 msgid "" "Paginate or columnate FILE(s) for printing.\n" "\n" msgstr "" #: src/pr.c:2765 msgid "" " +FIRST_PAGE[:LAST_PAGE], --pages=FIRST_PAGE[:LAST_PAGE]\n" " begin [stop] printing with page FIRST_[LAST_]PAGE\n" " -COLUMN, --columns=COLUMN\n" " output COLUMN columns and print columns down,\n" " unless -a is used. Balance number of lines in the\n" " columns on each page.\n" msgstr "" #: src/pr.c:2773 msgid "" " -a, --across print columns across rather than down, used together\n" " with -COLUMN\n" " -c, --show-control-chars\n" " use hat notation (^G) and octal backslash notation\n" " -d, --double-space\n" " double space the output\n" msgstr "" #: src/pr.c:2781 msgid "" " -D, --date-format=FORMAT\n" " use FORMAT for the header date\n" " -e[CHAR[WIDTH]], --expand-tabs[=CHAR[WIDTH]]\n" " expand input CHARs (TABs) to tab WIDTH (8)\n" " -F, -f, --form-feed\n" " use form feeds instead of newlines to separate pages\n" " (by a 3-line page header with -F or a 5-line header\n" " and trailer without -F)\n" msgstr "" #: src/pr.c:2791 msgid "" " -h HEADER, --header=HEADER\n" " use a centered HEADER instead of filename in page " "header,\n" " -h \"\" prints a blank line, don't use -h\"\"\n" " -i[CHAR[WIDTH]], --output-tabs[=CHAR[WIDTH]]\n" " replace spaces with CHARs (TABs) to tab WIDTH (8)\n" " -J, --join-lines merge full lines, turns off -W line truncation, no " "column\n" " alignment, --sep-string[=STRING] sets separators\n" msgstr "" #: src/pr.c:2800 msgid "" " -l PAGE_LENGTH, --length=PAGE_LENGTH\n" " set the page length to PAGE_LENGTH (66) lines\n" " (default number of lines of text 56, and with -F 63)\n" " -m, --merge print all files in parallel, one in each column,\n" " truncate lines, but join lines of full length with -J\n" msgstr "" #: src/pr.c:2807 msgid "" " -n[SEP[DIGITS]], --number-lines[=SEP[DIGITS]]\n" " number lines, use DIGITS (5) digits, then SEP (TAB),\n" " default counting starts with 1st line of input file\n" " -N NUMBER, --first-line-number=NUMBER\n" " start counting with NUMBER at 1st line of first\n" " page printed (see +FIRST_PAGE)\n" msgstr "" #: src/pr.c:2815 msgid "" " -o MARGIN, --indent=MARGIN\n" " offset each line with MARGIN (zero) spaces, do not\n" " affect -w or -W, MARGIN will be added to PAGE_WIDTH\n" " -r, --no-file-warnings\n" " omit warning when a file cannot be opened\n" msgstr "" #: src/pr.c:2822 msgid "" " -s[CHAR],--separator[=CHAR]\n" " separate columns by a single character, default for " "CHAR\n" " is the character without -w and 'no char' with -w\n" " -s[CHAR] turns off line truncation of all 3 column\n" " options (-COLUMN|-a -COLUMN|-m) except -w is set\n" msgstr "" #: src/pr.c:2829 msgid " -SSTRING, --sep-string[=STRING]\n" msgstr "" #: src/pr.c:2832 msgid "" " separate columns by STRING,\n" " without -S: Default separator with -J and \n" " otherwise (same as -S\" \"), no effect on column " "options\n" " -t, --omit-header omit page headers and trailers\n" msgstr "" #: src/pr.c:2838 msgid "" " -T, --omit-pagination\n" " omit page headers and trailers, eliminate any " "pagination\n" " by form feeds set in input files\n" " -v, --show-nonprinting\n" " use octal backslash notation\n" " -w PAGE_WIDTH, --width=PAGE_WIDTH\n" " set page width to PAGE_WIDTH (72) characters for\n" " multiple text-column output only, -s[char] turns off " "(72)\n" msgstr "" #: src/pr.c:2848 msgid "" " -W PAGE_WIDTH, --page-width=PAGE_WIDTH\n" " set page width to PAGE_WIDTH (72) characters always,\n" " truncate lines, except -J option is set, no " "interference\n" " with -S or -s\n" msgstr "" #: src/pr.c:2856 msgid "" "\n" "-T implied by -l nn when nn <= 10 or <= 3 with -F. With no FILE, or when\n" "FILE is -, read standard input.\n" msgstr "" #: src/printenv.c:43 #, fuzzy msgid "David MacKenzie and Richard Mlynarik" msgstr "Mike Parker、David MacKenzie 和 Jim Meyering" #: src/printenv.c:63 #, c-format msgid "" "Usage: %s [VARIABLE]...\n" " or: %s OPTION\n" "If no environment VARIABLE specified, print them all.\n" "\n" msgstr "" #: src/printf.c:87 #, c-format msgid "" "warning: %s: character(s) following character constant have been ignored" msgstr "" #: src/printf.c:100 #, fuzzy, c-format msgid "" "Usage: %s FORMAT [ARGUMENT]...\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/printf.c:105 msgid "" "Print ARGUMENT(s) according to FORMAT.\n" "\n" msgstr "" #: src/printf.c:111 msgid "" "\n" "FORMAT controls the output as in C printf. Interpreted sequences are:\n" "\n" " \\\" double quote\n" " \\NNN character with octal value NNN (1 to 3 digits)\n" " \\\\ backslash\n" msgstr "" #: src/printf.c:119 msgid "" " \\a alert (BEL)\n" " \\b backspace\n" " \\c produce no further output\n" " \\f form feed\n" msgstr "" #: src/printf.c:125 msgid "" " \\n new line\n" " \\r carriage return\n" " \\t horizontal tab\n" " \\v vertical tab\n" msgstr "" #: src/printf.c:131 msgid "" " \\xNN byte with hexadecimal value NN (1 to 2 digits)\n" "\n" " \\uNNNN character with hexadecimal value NNNN (4 digits)\n" " \\UNNNNNNNN character with hexadecimal value NNNNNNNN (8 digits)\n" msgstr "" #: src/printf.c:137 msgid "" " %% a single %\n" " %b ARGUMENT as a string with `\\' escapes interpreted,\n" " except that octal escapes are of the form \\0 or \\0NNN\n" "\n" "and all C format specifications ending with one of diouxXfeEgGcs, with\n" "ARGUMENTs converted to proper type first. Variable widths are handled.\n" msgstr "" #: src/printf.c:161 #, c-format msgid "%s: expected a numeric value" msgstr "" #: src/printf.c:163 #, c-format msgid "%s: value not completely converted" msgstr "" #: src/printf.c:257 src/printf.c:284 msgid "missing hexadecimal number in escape" msgstr "" #: src/printf.c:296 #, c-format msgid "invalid universal character name \\%c%0*x" msgstr "" #: src/printf.c:476 #, fuzzy, c-format msgid "invalid field width: %s" msgstr "无效的行宽数值：%s" #: src/printf.c:502 #, fuzzy, c-format msgid "invalid precision: %s" msgstr "转换无效：%s" #: src/printf.c:523 #, fuzzy, c-format msgid "%%%c: invalid directive" msgstr "%s：文件大小无效" #: src/printf.c:581 #, c-format msgid "Usage: %s format [argument...]\n" msgstr "" #: src/printf.c:599 #, c-format msgid "warning: ignoring excess arguments, starting with `%s'" msgstr "" #: src/ptx.c:409 #, c-format msgid "%s (for regexp `%s')" msgstr "" #: src/ptx.c:1858 #, c-format msgid "" "Usage: %s [OPTION]... [INPUT]... (without -G)\n" " or: %s -G [OPTION]... [INPUT [OUTPUT]]\n" msgstr "" #: src/ptx.c:1862 msgid "" "Output a permuted index, including context, of the words in the input " "files.\n" "\n" msgstr "" #: src/ptx.c:1869 msgid "" " -A, --auto-reference output automatically generated references\n" " -C, --copyright display Copyright and copying conditions\n" " -G, --traditional behave more like System V `ptx'\n" " -F, --flag-truncation=STRING use STRING for flagging line truncations\n" msgstr "" #: src/ptx.c:1875 msgid "" " -M, --macro-name=STRING macro name to use instead of `xx'\n" " -O, --format=roff generate output as roff directives\n" " -R, --right-side-refs put references at right, not counted in -w\n" " -S, --sentence-regexp=REGEXP for end of lines or end of sentences\n" " -T, --format=tex generate output as TeX directives\n" msgstr "" #: src/ptx.c:1882 msgid "" " -W, --word-regexp=REGEXP use REGEXP to match each keyword\n" " -b, --break-file=FILE word break characters in this FILE\n" " -f, --ignore-case fold lower case to upper case for sorting\n" " -g, --gap-size=NUMBER gap size in columns between output fields\n" " -i, --ignore-file=FILE read ignore word list from FILE\n" " -o, --only-file=FILE read only word list from this FILE\n" msgstr "" #: src/ptx.c:1890 msgid "" " -r, --references first field of each line is a reference\n" " -t, --typeset-mode - not implemented -\n" " -w, --width=NUMBER output width in columns, reference " "excluded\n" msgstr "" #: src/ptx.c:1897 msgid "" "\n" "With no FILE or if FILE is -, read Standard Input. `-F /' by default.\n" msgstr "" #: src/ptx.c:1978 msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" msgstr "" #: src/ptx.c:1985 msgid "" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" msgstr "" #: src/ptx.c:1992 msgid "" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software Foundation,\n" "Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: src/pwd.c:46 msgid "" "Print the full filename of the current working directory.\n" "\n" msgstr "" #: src/pwd.c:74 #, fuzzy msgid "ignoring non-option arguments" msgstr "忽略任何参数" #: src/readlink.c:67 #, fuzzy, c-format msgid "Usage: %s [OPTION]... FILE\n" msgstr "用法：%s [选项]... [文件]\n" #: src/readlink.c:68 msgid "" "Display value of a symbolic link on standard output.\n" "\n" msgstr "" #: src/readlink.c:70 msgid "" " -f, --canonicalize canonicalize by following every symlink in every\n" " component of the given path recursively\n" " -n, --no-newline do not output the trailing newline\n" " -q, --quiet,\n" " -s, --silent suppress most error messages\n" " -v, --verbose report error messages\n" msgstr "" #: src/remove.c:394 #, c-format msgid "cannot chdir from %s to .." msgstr "无法从%s目录切换到 .. 目录" #: src/remove.c:407 src/remove.c:488 #, c-format msgid "cannot lstat `.' in %s" msgstr "无法在%s中 lstat‘.’" #: src/remove.c:414 src/remove.c:492 #, c-format msgid "%s changed dev/ino" msgstr "%s的 dev/ino 变了" #: src/remove.c:574 src/remove.c:719 src/remove.c:897 src/remove.c:1003 #, c-format msgid "cannot lstat %s" msgstr "lstat%s失败" #: src/remove.c:581 src/remove.c:741 src/remove.c:758 src/remove.c:1083 #, c-format msgid "cannot remove directory %s" msgstr "无法删除目录%s" #: src/remove.c:610 #, c-format msgid "%s: descend into write-protected directory %s? " msgstr "%s：是否进入有写保护的目录%s? " #: src/remove.c:611 #, c-format msgid "%s: descend into directory %s? " msgstr "%s：是否进入目录%s? " #: src/remove.c:621 #, c-format msgid "%s: remove write-protected %s %s? " msgstr "%s：是否删除有写保护的%s%s? " #: src/remove.c:622 #, c-format msgid "%s: remove %s %s? " msgstr "%s：是否删除%s%s? " #: src/remove.c:646 #, c-format msgid "removed %s\n" msgstr "已删除%s\n" #: src/remove.c:661 src/remove.c:1078 #, c-format msgid "removed directory: %s\n" msgstr "已删除目录：%s\n" #: src/remove.c:823 #, c-format msgid "cannot open directory %s" msgstr "无法打开目录%s" #: src/remove.c:912 src/remove.c:1021 #, c-format msgid "cannot chdir from %s to %s" msgstr "无法从%s切换到目录%s" #: src/remove.c:920 #, c-format msgid "" "WARNING: Circular directory structure.\n" "This almost certainly means that you have a corrupted file system.\n" "NOTIFY YOUR SYSTEM MANAGER.\n" "The following directory is part of the cycle:\n" " %s\n" msgstr "" " 警告：发现循环的目录架构。\n" "这几乎可以肯定文件系统已经损坏。\n" "** 请告诉系统管理员。**\n" "以下的目录是循环的一部份：\n" " %s\n" #: src/remove.c:1117 msgid "cannot remove `.' or `..'" msgstr "无法删除‘.’或‘..’" #: src/rm.c:61 #, fuzzy msgid "Paul Rubin, David MacKenzie, Richard Stallman, and Jim Meyering" msgstr "Mike Parker、David MacKenzie 和 Jim Meyering" #: src/rm.c:101 src/touch.c:229 #, c-format msgid "Usage: %s [OPTION]... FILE...\n" msgstr "用法：%s [选项]... 目录...\n" #: src/rm.c:102 #, fuzzy msgid "" "Remove (unlink) the FILE(s).\n" "\n" " -d, --directory unlink FILE, even if it is a non-empty directory\n" " (super-user only; this works only if your system\n" " supports `unlink' for nonempty directories)\n" " -f, --force ignore nonexistent files, never prompt\n" " -i, --interactive prompt before any removal\n" " -r, -R, --recursive remove the contents of directories recursively\n" " -v, --verbose explain what is being done\n" msgstr "" "删除指定的<文件>(即解除链接)。\n" "\n" " -d, --directory 删除可能仍有数据的目录 (只限超级用户)\n" " -f, --force 略过不存在的文件，不显示任何信息\n" " -i, --interactive 进行任何删除操作前必须先确认\n" " -r, -R, --recursive 同时删除该目录下的所有目录层\n" " -v, --verbose 详细显示进行的步骤\n" #: src/rm.c:115 #, c-format msgid "" "\n" "To remove a file whose name starts with a `-', for example `-foo',\n" "use one of these commands:\n" " %s -- -foo\n" "\n" " %s ./-foo\n" msgstr "" "\n" "要删除第一个字符为‘-’的文件 (例如‘-foo’)，请使用以下其中一种方法：\n" " %s -- -foo\n" "\n" " %s ./-foo\n" #: src/rm.c:124 msgid "" "\n" "Note that if you use rm to remove a file, it is usually possible to recover\n" "the contents of that file. If you want more assurance that the contents " "are\n" "truly unrecoverable, consider using shred.\n" msgstr "" "\n" "请注意，如果使用 rm 来删除文件，通常仍可以将该文件恢复原状。如果想保证\n" "该文件的内容无法还原，请考虑使用 shred。\n" #: src/rmdir.c:116 src/rmdir.c:218 #, c-format msgid "removing directory, %s" msgstr "正在删除目录 %s" #: src/rmdir.c:146 #, c-format msgid "Usage: %s [OPTION]... DIRECTORY...\n" msgstr "用法：%s [选项]... 目录...\n" #: src/rmdir.c:147 msgid "" "Remove the DIRECTORY(ies), if they are empty.\n" "\n" " --ignore-fail-on-non-empty\n" " ignore each failure that is solely because a directory\n" " is non-empty\n" msgstr "" "如果<目录>没有数据则删除该目录。\n" "\n" " --ignore-fail-on-non-empty\n" " 忽略任何因目录仍有数据而造成的错误\n" #: src/rmdir.c:154 msgid "" " -p, --parents remove DIRECTORY, then try to remove each directory\n" " component of that path name. E.g., `rmdir -p a/b/c' is\n" " similar to `rmdir a/b/c a/b a'.\n" " -v, --verbose output a diagnostic for every directory processed\n" msgstr "" " -p, --parents 删除<目录>，然后尝试删除指定路径中的所有上层目录。例如：\n" " ‘rmdir -p a/b/c’的效果等於‘rmdir a/b/c a/b a’。\n" " -v, --verbose 处理每个目录时都显示信息\n" #: src/seq.c:81 #, fuzzy, c-format msgid "" "Usage: %s [OPTION]... LAST\n" " or: %s [OPTION]... FIRST LAST\n" " or: %s [OPTION]... FIRST INCREMENT LAST\n" msgstr "" "用法：%s [选项]... 来源 目的地\n" " 或：%s [选项]... 来源... 目录\n" " 或：%s [选项]... --target-directory=目录 来源...\n" #: src/seq.c:86 #, c-format msgid "" "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" "\n" " -f, --format=FORMAT use printf style floating-point FORMAT (default: %" "g)\n" " -s, --separator=STRING use STRING to separate numbers (default: \\n)\n" " -w, --equal-width equalize width by padding with leading zeroes\n" msgstr "" #: src/seq.c:95 #, c-format msgid "" "\n" "If FIRST or INCREMENT is omitted, it defaults to 1.\n" "FIRST, INCREMENT, and LAST are interpreted as floating point values.\n" "INCREMENT should be positive if FIRST is smaller than LAST, and negative\n" "otherwise. When given, the FORMAT argument must contain exactly one of\n" "the printf-style, floating point output formats %e, %f, %g\n" msgstr "" #: src/seq.c:118 #, fuzzy, c-format msgid "invalid floating point argument: %s" msgstr "日期格式 %s 无效" #: src/seq.c:188 msgid "" "when the starting value is larger than the limit,\n" "the increment must be negative" msgstr "" #: src/seq.c:212 msgid "" "when the starting value is smaller than the limit,\n" "the increment must be positive" msgstr "" #: src/seq.c:423 #, fuzzy, c-format msgid "invalid format string: `%s'" msgstr "权限模式字串无效：%s " #: src/seq.c:445 #, fuzzy msgid "format string may not be specified when printing equal width strings" msgstr "安装目录时不能用 strip 选项" #: src/setuidgid.c:50 #, fuzzy, c-format msgid "" "Usage: %s USERNAME COMMAND [ARGUMENT]...\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/setuidgid.c:56 msgid "" "Drop any supplemental groups, assume the user-ID and group-ID of\n" "the specified USERNAME, and run COMMAND with any specified ARGUMENTs.\n" "Exit with status 111 if unable to assume the required UID and GID.\n" "Otherwise, exit with the exit status of COMMAND.\n" "This program is useful only when run by root (UID=0).\n" "\n" msgstr "" #: src/setuidgid.c:106 #, c-format msgid "unknown user-ID: %s" msgstr "" #: src/setuidgid.c:112 #, fuzzy msgid "cannot set supplemental group" msgstr "无法改变所属组至没有名称的组" #: src/setuidgid.c:118 #, fuzzy, c-format msgid "cannot set group-ID to %ld" msgstr "无法改变所属组至没有名称的组" #: src/setuidgid.c:124 #, fuzzy, c-format msgid "cannot set user-ID to %ld" msgstr "stat%s失败" #: src/shred.c:159 #, c-format msgid "Usage: %s [OPTIONS] FILE [...]\n" msgstr "用法：%s [选项] 文件 [...]\n" #: src/shred.c:160 msgid "" "Overwrite the specified FILE(s) repeatedly, in order to make it harder\n" "for even very expensive hardware probing to recover the data.\n" "\n" msgstr "重复覆盖<文件>，使得即使是昂贵的硬件探测仪器也难以将数据复原。\n" #: src/shred.c:168 #, c-format msgid "" " -f, --force change permissions to allow writing if necessary\n" " -n, --iterations=N Overwrite N times instead of the default (%d)\n" " -s, --size=N shred this many bytes (suffixes like K, M, G accepted)\n" msgstr "" " -f, --force 有需要时强迫程序可写入文件\n" " -n, --iterations=N 自行指定重复覆盖的次数 (默认为 %d 次)\n" " -s, --size=N 覆盖指定的字节数目 (可接受 K、M、G 等等的单位)\n" #: src/shred.c:173 #, fuzzy msgid "" " -u, --remove truncate and remove file after overwriting\n" " -v, --verbose show progress\n" " -x, --exact do not round file sizes up to the next full block;\n" " this is the default for non-regular files\n" " -z, --zero add a final overwrite with zeros to hide shredding\n" " - shred standard output\n" msgstr "" " -u, --remove 覆盖后会截断及删除该文件\n" " -v, --verbose 显示进度\n" " -x, --exact 不将文件大小增加至最接近的块大小\n" " -z, --zero 最后一次会使用 0 字节进行覆盖来隐藏覆盖动作\n" " - 覆盖标准输出的数据\n" #: src/shred.c:183 msgid "" "\n" "Delete FILE(s) if --remove (-u) is specified. The default is not to remove\n" "the files because it is common to operate on device files like /dev/hda,\n" "and those files usually should not be removed. When operating on regular\n" "files, most people use the --remove option.\n" "\n" msgstr "" "\n" "如果加上 --remove (-u) 选项表示删除<文件>。默认的方式是不删除文件，因为\n" "覆盖像 /dev/hda 等的设备文件是很普遍的，而这些文件通常不应删除。当覆盖\n" "一般文件时，绝大多数人都会使用 --remove 选项。\n" #: src/shred.c:191 msgid "" "CAUTION: Note that shred relies on a very important assumption:\n" "that the filesystem overwrites data in place. This is the traditional\n" "way to do things, but many modern filesystem designs do not satisfy this\n" "assumption. The following are examples of filesystems on which shred is\n" "not effective:\n" "\n" msgstr "" "警告：请注意使用 shred 时有一个很重要的条件：\n" "文件系统会在原来的位置覆盖指定的数据。传统的文件系统符合此条件，但许多现代\n" "的文件系统都不符合条件。以下是会令 shred 无效的文件系统的例子：\n" "\n" #: src/shred.c:199 msgid "" "* log-structured or journaled filesystems, such as those supplied with\n" " AIX and Solaris (and JFS, ReiserFS, XFS, Ext3, etc.)\n" "\n" "* filesystems that write redundant data and carry on even if some writes\n" " fail, such as RAID-based filesystems\n" "\n" "* filesystems that make snapshots, such as Network Appliance's NFS server\n" "\n" msgstr "" "● 有纪录结构或是日志式文件系统，像 AIX 及 Solaris 使用的文件系统 (以及\n" " JFS、ReiserFS、XFS、Ext3 等等)\n" "\n" "● 会重复写入数据，及即使一部份写入动作失败后仍可继续的文件系统，像使用\n" " RAID 的文件系统\n" "\n" "● 会不时进行快照纪录的文件系统，像 Network Applicance 的 NFS 服务器\n" "\n" #: src/shred.c:209 msgid "" "* filesystems that cache in temporary locations, such as NFS\n" " version 3 clients\n" "\n" "* compressed filesystems\n" "\n" "In addition, file system backups and remote mirrors may contain copies\n" "of the file that cannot be removed, and that will allow a shredded file\n" "to be recovered later.\n" msgstr "" "● 会将快取记忆放入暂存位置的文件系统，像 NFS 第 3 版本的客户端程序\n" "\n" "● 会压缩数据的文件系统\n" "\n" "另外，文件系统的备份及远程的 mirror 都可能所有该文件的复制本，这些复制本\n" "都是无法删除的，而且可能令已经用 shred 处理过的文件恢复原状。\n" #: src/shred.c:807 #, c-format msgid "%s: cannot rewind" msgstr "%s：无法向后搜寻" #: src/shred.c:830 #, c-format msgid "%s: pass %lu/%lu (%s)..." msgstr "%1$s：%3$lu 次之第 %2$lu 次 (%4$s)..." #: src/shred.c:867 #, c-format msgid "%s: error writing at offset %s" msgstr "%s：在位置 %s 写入时出现错误 " #: src/shred.c:896 #, c-format msgid "%s: file too large" msgstr "%s：文件过大" #: src/shred.c:919 #, c-format msgid "%s: pass %lu/%lu (%s)...%s" msgstr "%1$s：%3$lu 次之第 %2$lu 次 (%4$s)...%5$s" #: src/shred.c:935 #, c-format msgid "%s: pass %lu/%lu (%s)...%s/%s %d%%" msgstr "%1$s：%3$lu 次之第 %2$lu 次 (%4$s)...%5$s/%6$s %7$d%%" #: src/shred.c:1194 #, c-format msgid "%s: invalid file type" msgstr "%s：文件类型无效" #: src/shred.c:1211 #, c-format msgid "%s: file has negative size" msgstr "%s：文件的大小为负数" #: src/shred.c:1264 #, c-format msgid "%s: error truncating" msgstr "%s：截断文件时出现错误" #: src/shred.c:1285 #, c-format msgid "%s: cannot shred append-only file descriptor" msgstr "%s：不能将只可加上数据的文件描述符 (file descriptor) 进行 shred 动作" #: src/shred.c:1370 #, c-format msgid "%s: removing" msgstr "%s：正在删除" #: src/shred.c:1411 #, c-format msgid "%s: renamed to %s" msgstr "%s：名称已更改为 %s" #: src/shred.c:1437 #, c-format msgid "%s: removed" msgstr "%s：已经删除" #: src/shred.c:1502 #, c-format msgid "%s: cannot remove" msgstr "%s：无法删除" #: src/shred.c:1551 #, c-format msgid "%s: invalid number of passes" msgstr "%s：覆盖次数无效" #: src/shred.c:1568 #, c-format msgid "%s: invalid file size" msgstr "%s：文件大小无效" #: src/sleep.c:33 msgid "Jim Meyering and Paul Eggert" msgstr "" #: src/sleep.c:51 #, c-format msgid "" "Usage: %s NUMBER[SUFFIX]...\n" " or: %s OPTION\n" "Pause for NUMBER seconds. SUFFIX may be `s' for seconds (the default),\n" "`m' for minutes, `h' for hours or `d' for days. Unlike most " "implementations\n" "that require NUMBER be an integer, here NUMBER may be an arbitrary floating\n" "point number.\n" "\n" msgstr "" #: src/sleep.c:155 #, fuzzy, c-format msgid "invalid time interval `%s'" msgstr "无效的日期时间格式 %s" #: src/sleep.c:166 src/tail.c:1061 #, fuzzy msgid "cannot read realtime clock" msgstr "无法创建链接%s" #: src/sort.c:54 msgid "Mike Haertel and Paul Eggert" msgstr "" #: src/sort.c:283 msgid "" "Write sorted concatenation of all FILE(s) to standard output.\n" "\n" "Ordering options:\n" "\n" msgstr "" #: src/sort.c:292 msgid "" " -b, --ignore-leading-blanks ignore leading blanks\n" " -d, --dictionary-order consider only blanks and alphanumeric " "characters\n" " -f, --ignore-case fold lower case to upper case characters\n" msgstr "" #: src/sort.c:297 msgid "" " -g, --general-numeric-sort compare according to general numerical value\n" " -i, --ignore-nonprinting consider only printable characters\n" " -M, --month-sort compare (unknown) < `JAN' < ... < `DEC'\n" " -n, --numeric-sort compare according to string numerical value\n" " -r, --reverse reverse the result of comparisons\n" "\n" msgstr "" #: src/sort.c:305 msgid "" "Other options:\n" "\n" " -c, --check check whether input is sorted; do not sort\n" " -k, --key=POS1[,POS2] start a key at POS1, end it at POS 2 (origin 1)\n" " -m, --merge merge already sorted files; do not sort\n" " -o, --output=FILE write result to FILE instead of standard output\n" " -s, --stable stabilize sort by disabling last-resort " "comparison\n" " -S, --buffer-size=SIZE use SIZE for main memory buffer\n" msgstr "" #: src/sort.c:315 #, c-format msgid "" " -t, --field-separator=SEP use SEP instead of non- to whitespace " "transition\n" " -T, --temporary-directory=DIR use DIR for temporaries, not $TMPDIR or %s\n" " multiple options specify multiple directories\n" " -u, --unique with -c: check for strict ordering\n" " otherwise: output only the first of an equal " "run\n" msgstr "" #: src/sort.c:322 msgid " -z, --zero-terminated end lines with 0 byte, not newline\n" msgstr "" #: src/sort.c:327 msgid "" "\n" "POS is F[.C][OPTS], where F is the field number and C the character " "position\n" "in the field. OPTS is one or more single-letter ordering options, which\n" "override global ordering options for that key. If no key is given, use the\n" "entire line as the key.\n" "\n" "SIZE may be followed by the following multiplicative suffixes:\n" msgstr "" #: src/sort.c:336 #, c-format msgid "" "% 1% of memory, b 1, K 1024 (default), and so on for M, G, T, P, E, Z, Y.\n" "\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" "*** WARNING ***\n" "The locale specified by the environment affects sort order.\n" "Set LC_ALL=C to get the traditional sort order that uses\n" "native byte values.\n" msgstr "" #: src/sort.c:447 #, fuzzy msgid "cannot create temporary file" msgstr "无法创建一般文件%s" #: src/sort.c:470 #, fuzzy msgid "open failed" msgstr "strip 出现错误" #: src/sort.c:490 src/sort.c:2556 #, fuzzy msgid "close failed" msgstr "strip 出现错误" #: src/sort.c:498 #, fuzzy msgid "write failed" msgstr "strip 出现错误" #: src/sort.c:644 #, fuzzy msgid "sort size" msgstr "块大小" #: src/sort.c:718 #, fuzzy msgid "stat failed" msgstr "strip 出现错误" #: src/sort.c:975 #, fuzzy msgid "read failed" msgstr "strip 出现错误" #: src/sort.c:1573 #, c-format msgid "%s: %s:%s: disorder: " msgstr "" #: src/sort.c:1577 #, fuzzy msgid "standard error" msgstr "标准输出" #: src/sort.c:2089 #, fuzzy, c-format msgid "%s: invalid field specification `%s'" msgstr "%s：文件大小无效" #: src/sort.c:2115 #, fuzzy, c-format msgid "%s: count `%.*s' too large" msgstr "%s：文件过大" #: src/sort.c:2121 #, fuzzy, c-format msgid "%s: invalid count at start of `%s'" msgstr "%s：覆盖次数无效" #: src/sort.c:2358 #, fuzzy msgid "invalid number after `-'" msgstr "无效的号码 %s" #: src/sort.c:2361 src/sort.c:2407 src/sort.c:2434 #, fuzzy msgid "invalid number after `.'" msgstr "无效的号码 %s" #: src/sort.c:2364 src/sort.c:2443 #, fuzzy msgid "stray character in field spec" msgstr "字符特殊文件" #: src/sort.c:2398 #, fuzzy msgid "invalid number at field start" msgstr "无效的号码 %s" #: src/sort.c:2402 src/sort.c:2430 #, fuzzy msgid "field number is zero" msgstr "无效的号码 %s" #: src/sort.c:2411 #, fuzzy msgid "character offset is zero" msgstr "字符特殊文件" #: src/sort.c:2426 #, fuzzy msgid "invalid number after `,'" msgstr "无效的号码 %s" #: src/sort.c:2471 #, c-format msgid "multi-character tab `%s'" msgstr "" #: src/sort.c:2539 #, c-format msgid "extra operand `%s' not allowed with -c" msgstr "" #: src/split.c:96 #, fuzzy, c-format msgid "Usage: %s [OPTION] [INPUT [PREFIX]]\n" msgstr "用法：%s [选项]... [文件]\n" #: src/split.c:100 msgid "" "Output fixed-size pieces of INPUT to PREFIXaa, PREFIXab, ...; default\n" "PREFIX is `x'. With no INPUT, or when INPUT is -, read standard input.\n" "\n" msgstr "" #: src/split.c:108 #, c-format msgid "" " -a, --suffix-length=N use suffixes of length N (default %d)\n" " -b, --bytes=SIZE put SIZE bytes per output file\n" " -C, --line-bytes=SIZE put at most SIZE bytes of lines per output file\n" " -l, --lines=NUMBER put NUMBER lines per output file\n" msgstr "" #: src/split.c:114 msgid "" " --verbose print a diagnostic to standard error just\n" " before each output file is opened\n" msgstr "" #: src/split.c:120 msgid "" "\n" "SIZE may have a multiplier suffix: b for 512, k for 1K, m for 1 Meg.\n" msgstr "" #: src/split.c:171 msgid "Output file suffixes exhausted" msgstr "" #: src/split.c:189 #, fuzzy, c-format msgid "creating file `%s'\n" msgstr "正在创建目录 %s" #: src/split.c:346 #, fuzzy msgid "cannot split in more than one way" msgstr "无法由多於一种的来源来指定时间" #: src/split.c:398 #, fuzzy, c-format msgid "%s: invalid suffix length" msgstr "%s：文件类型无效" #: src/split.c:412 src/split.c:436 #, fuzzy, c-format msgid "%s: invalid number of bytes" msgstr "%s：覆盖次数无效" #: src/split.c:424 #, fuzzy, c-format msgid "%s: invalid number of lines" msgstr "%s：覆盖次数无效" #: src/split.c:466 #, fuzzy, c-format msgid "line count option -%s%c... is too large" msgstr "%s：文件过大" #: src/split.c:485 #, c-format msgid "`-%s' option is obsolete; use `-l %s'" msgstr "" #: src/split.c:500 #, fuzzy msgid "invalid number of lines: 0" msgstr "无效的号码 %s" #: src/stat.c:336 #, fuzzy msgid "*** invalid date/time ***" msgstr "无效的权限模式%s" #: src/stat.c:618 #, fuzzy, c-format msgid "cannot read file system information for %s" msgstr "无法创建 fifo 文件%s" #: src/stat.c:694 #, c-format msgid "Usage: %s [OPTION] FILE...\n" msgstr "用法：%s [选项] 文件...\n" #: src/stat.c:695 msgid "" "Display file or filesystem status.\n" "\n" " -f, --filesystem display filesystem status instead of file status\n" " -c --format=FORMAT use the specified FORMAT instead of the default\n" " -L, --dereference follow links\n" " -t, --terse print the information in terse form\n" msgstr "" #: src/stat.c:706 msgid "" "\n" "The valid format sequences for files (without --filesystem):\n" "\n" " %A Access rights in human readable form\n" " %a Access rights in octal\n" " %B The size in bytes of each block reported by `%b'\n" " %b Number of blocks allocated (see %B)\n" msgstr "" #: src/stat.c:714 msgid "" " %D Device number in hex\n" " %d Device number in decimal\n" " %F File type\n" " %f Raw mode in hex\n" " %G Group name of owner\n" " %g Group ID of owner\n" msgstr "" #: src/stat.c:722 msgid "" " %h Number of hard links\n" " %i Inode number\n" " %N Quoted File name with dereference if symbolic link\n" " %n File name\n" " %o IO block size\n" " %s Total size, in bytes\n" " %T Minor device type in hex\n" " %t Major device type in hex\n" msgstr "" #: src/stat.c:732 msgid "" " %U User name of owner\n" " %u User ID of owner\n" " %X Time of last access as seconds since Epoch\n" " %x Time of last access\n" " %Y Time of last modification as seconds since Epoch\n" " %y Time of last modification\n" " %Z Time of last change as seconds since Epoch\n" " %z Time of last change\n" "\n" msgstr "" #: src/stat.c:744 msgid "" "Valid format sequences for file systems:\n" "\n" " %a Free blocks available to non-superuser\n" " %b Total data blocks in file system\n" " %c Total file nodes in file system\n" " %d Free file nodes in file system\n" " %f Free blocks in file system\n" msgstr "" #: src/stat.c:753 msgid "" " %i File System id in hex\n" " %l Maximum length of filenames\n" " %n File name\n" " %s Optimal transfer block size\n" " %T Type in human readable form\n" " %t Type in hex\n" msgstr "" #: src/stty.c:489 #, c-format msgid "" "Usage: %s [-F DEVICE] [--file=DEVICE] [SETTING]...\n" " or: %s [-F DEVICE] [--file=DEVICE] [-a|--all]\n" " or: %s [-F DEVICE] [--file=DEVICE] [-g|--save]\n" msgstr "" #: src/stty.c:495 msgid "" "Print or change terminal characteristics.\n" "\n" " -a, --all print all current settings in human-readable form\n" " -g, --save print all current settings in a stty-readable form\n" " -F, --file=DEVICE open and use the specified DEVICE instead of stdin\n" msgstr "" #: src/stty.c:504 msgid "" "\n" "Optional - before SETTING indicates negation. An * marks non-POSIX\n" "settings. The underlying system defines which settings are available.\n" msgstr "" #: src/stty.c:509 msgid "" "\n" "Special characters:\n" " * dsusp CHAR CHAR will send a terminal stop signal once input flushed\n" " eof CHAR CHAR will send an end of file (terminate the input)\n" " eol CHAR CHAR will end the line\n" msgstr "" #: src/stty.c:516 msgid "" " * eol2 CHAR alternate CHAR for ending the line\n" " erase CHAR CHAR will erase the last character typed\n" " intr CHAR CHAR will send an interrupt signal\n" " kill CHAR CHAR will erase the current line\n" msgstr "" #: src/stty.c:522 msgid "" " * lnext CHAR CHAR will enter the next character quoted\n" " quit CHAR CHAR will send a quit signal\n" " * rprnt CHAR CHAR will redraw the current line\n" " start CHAR CHAR will restart the output after stopping it\n" msgstr "" #: src/stty.c:528 msgid "" " stop CHAR CHAR will stop the output\n" " susp CHAR CHAR will send a terminal stop signal\n" " * swtch CHAR CHAR will switch to a different shell layer\n" " * werase CHAR CHAR will erase the last word typed\n" msgstr "" #: src/stty.c:534 msgid "" "\n" "Special settings:\n" " N set the input and output speeds to N bauds\n" " * cols N tell the kernel that the terminal has N columns\n" " * columns N same as cols N\n" msgstr "" #: src/stty.c:541 msgid "" " ispeed N set the input speed to N\n" " * line N use line discipline N\n" " min N with -icanon, set N characters minimum for a completed " "read\n" " ospeed N set the output speed to N\n" msgstr "" #: src/stty.c:547 msgid "" " * rows N tell the kernel that the terminal has N rows\n" " * size print the number of rows and columns according to the " "kernel\n" " speed print the terminal speed\n" " time N with -icanon, set read timeout of N tenths of a second\n" msgstr "" #: src/stty.c:553 msgid "" "\n" "Control settings:\n" " [-]clocal disable modem control signals\n" " [-]cread allow input to be received\n" " * [-]crtscts enable RTS/CTS handshaking\n" " csN set character size to N bits, N in [5..8]\n" msgstr "" #: src/stty.c:561 msgid "" " [-]cstopb use two stop bits per character (one with `-')\n" " [-]hup send a hangup signal when the last process closes the tty\n" " [-]hupcl same as [-]hup\n" " [-]parenb generate parity bit in output and expect parity bit in " "input\n" " [-]parodd set odd parity (even with `-')\n" msgstr "" #: src/stty.c:568 msgid "" "\n" "Input settings:\n" " [-]brkint breaks cause an interrupt signal\n" " [-]icrnl translate carriage return to newline\n" " [-]ignbrk ignore break characters\n" " [-]igncr ignore carriage return\n" msgstr "" #: src/stty.c:576 msgid "" " [-]ignpar ignore characters with parity errors\n" " * [-]imaxbel beep and do not flush a full input buffer on a character\n" " [-]inlcr translate newline to carriage return\n" " [-]inpck enable input parity checking\n" " [-]istrip clear high (8th) bit of input characters\n" msgstr "" #: src/stty.c:583 msgid "" " * [-]iuclc translate uppercase characters to lowercase\n" " * [-]ixany let any character restart output, not only start character\n" " [-]ixoff enable sending of start/stop characters\n" " [-]ixon enable XON/XOFF flow control\n" " [-]parmrk mark parity errors (with a 255-0-character sequence)\n" " [-]tandem same as [-]ixoff\n" msgstr "" #: src/stty.c:591 msgid "" "\n" "Output settings:\n" " * bsN backspace delay style, N in [0..1]\n" " * crN carriage return delay style, N in [0..3]\n" " * ffN form feed delay style, N in [0..1]\n" " * nlN newline delay style, N in [0..1]\n" msgstr "" #: src/stty.c:599 msgid "" " * [-]ocrnl translate carriage return to newline\n" " * [-]ofdel use delete characters for fill instead of null characters\n" " * [-]ofill use fill (padding) characters instead of timing for delays\n" " * [-]olcuc translate lowercase characters to uppercase\n" " * [-]onlcr translate newline to carriage return-newline\n" " * [-]onlret newline performs a carriage return\n" msgstr "" #: src/stty.c:607 msgid "" " * [-]onocr do not print carriage returns in the first column\n" " [-]opost postprocess output\n" " * tabN horizontal tab delay style, N in [0..3]\n" " * tabs same as tab0\n" " * -tabs same as tab3\n" " * vtN vertical tab delay style, N in [0..1]\n" msgstr "" #: src/stty.c:615 msgid "" "\n" "Local settings:\n" " [-]crterase echo erase characters as backspace-space-backspace\n" " * crtkill kill all line by obeying the echoprt and echoe settings\n" " * -crtkill kill all line by obeying the echoctl and echok settings\n" msgstr "" #: src/stty.c:622 msgid "" " * [-]ctlecho echo control characters in hat notation (`^c')\n" " [-]echo echo input characters\n" " * [-]echoctl same as [-]ctlecho\n" " [-]echoe same as [-]crterase\n" " [-]echok echo a newline after a kill character\n" msgstr "" #: src/stty.c:629 msgid "" " * [-]echoke same as [-]crtkill\n" " [-]echonl echo newline even if not echoing other characters\n" " * [-]echoprt echo erased characters backward, between `\\' and '/'\n" " [-]icanon enable erase, kill, werase, and rprnt special characters\n" " [-]iexten enable non-POSIX special characters\n" msgstr "" #: src/stty.c:636 msgid "" " [-]isig enable interrupt, quit, and suspend special characters\n" " [-]noflsh disable flushing after interrupt and quit special " "characters\n" " * [-]prterase same as [-]echoprt\n" " * [-]tostop stop background jobs that try to write to the terminal\n" " * [-]xcase with icanon, escape with `\\' for uppercase characters\n" msgstr "" #: src/stty.c:643 msgid "" "\n" "Combination settings:\n" " * [-]LCASE same as [-]lcase\n" " cbreak same as -icanon\n" " -cbreak same as icanon\n" msgstr "" #: src/stty.c:650 msgid "" " cooked same as brkint ignpar istrip icrnl ixon opost isig\n" " icanon, eof and eol characters to their default values\n" " -cooked same as raw\n" " crt same as echoe echoctl echoke\n" msgstr "" #: src/stty.c:656 msgid "" " dec same as echoe echoctl echoke -ixany intr ^c erase 0177\n" " kill ^u\n" " * [-]decctlq same as [-]ixany\n" " ek erase and kill characters to their default values\n" " evenp same as parenb -parodd cs7\n" msgstr "" #: src/stty.c:663 msgid "" " -evenp same as -parenb cs8\n" " * [-]lcase same as xcase iuclc olcuc\n" " litout same as -parenb -istrip -opost cs8\n" " -litout same as parenb istrip opost cs7\n" " nl same as -icrnl -onlcr\n" " -nl same as icrnl -inlcr -igncr onlcr -ocrnl -onlret\n" msgstr "" #: src/stty.c:671 msgid "" " oddp same as parenb parodd cs7\n" " -oddp same as -parenb cs8\n" " [-]parity same as [-]evenp\n" " pass8 same as -parenb -istrip cs8\n" " -pass8 same as parenb istrip cs7\n" msgstr "" #: src/stty.c:678 msgid "" " raw same as -ignbrk -brkint -ignpar -parmrk -inpck -istrip\n" " -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany\n" " -imaxbel -opost -isig -icanon -xcase min 1 time 0\n" " -raw same as cooked\n" msgstr "" #: src/stty.c:684 msgid "" " sane same as cread -ignbrk brkint -inlcr -igncr icrnl\n" " -ixoff -iuclc -ixany imaxbel opost -olcuc -ocrnl onlcr\n" " -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0\n" " isig icanon iexten echo echoe echok -echonl -noflsh\n" " -xcase -tostop -echoprt echoctl echoke, all special\n" " characters to their default values.\n" msgstr "" #: src/stty.c:692 msgid "" "\n" "Handle the tty line connected to standard input. Without arguments,\n" "prints baud rate, line discipline, and deviations from stty sane. In\n" "settings, CHAR is taken literally, or coded as in ^c, 0x37, 0177 or\n" "127; special values ^- or undef used to disable special characters.\n" msgstr "" #: src/stty.c:779 msgid "only one device may be specified" msgstr "" #: src/stty.c:874 #, fuzzy msgid "" "the options for verbose and stty-readable output styles are\n" "mutually exclusive" msgstr "" "显示 dircolors 内部数据库的选项和选择 shell 语法的选项\n" "是互相抵触的" #: src/stty.c:879 msgid "when specifying an output style, modes may not be set" msgstr "" #: src/stty.c:895 #, c-format msgid "%s: couldn't reset non-blocking mode" msgstr "" #: src/stty.c:949 src/stty.c:1056 #, fuzzy, c-format msgid "invalid argument `%s'" msgstr "%2$s 的参数 %1$s 无效" #: src/stty.c:960 src/stty.c:977 src/stty.c:989 src/stty.c:1002 #: src/stty.c:1014 src/stty.c:1033 #, fuzzy, c-format msgid "missing argument to `%s'" msgstr "缺少了文件参数" #: src/stty.c:1109 #, c-format msgid "%s: unable to perform all requested operations" msgstr "" #: src/stty.c:1114 msgid "new_mode: mode\n" msgstr "" #: src/stty.c:1454 #, c-format msgid "%s: no size information for this device" msgstr "" #: src/stty.c:1936 #, fuzzy, c-format msgid "invalid integer argument `%s'" msgstr "%2$s 的参数 %1$s 无效" #: src/su.c:288 msgid "Password:" msgstr "" #: src/su.c:291 #, fuzzy msgid "getpass: cannot open /dev/tty" msgstr "无法打开目录%s" #: src/su.c:349 #, fuzzy msgid "cannot set groups" msgstr "stat%s失败" #: src/su.c:353 #, fuzzy msgid "cannot set group id" msgstr "无法改变所属组至没有名称的组" #: src/su.c:355 #, fuzzy msgid "cannot set user id" msgstr "stat%s失败" #: src/su.c:436 #, fuzzy, c-format msgid "Usage: %s [OPTION]... [-] [USER [ARG]...]\n" msgstr "用法：%s [选项]... [文件]...\n" #: src/su.c:437 msgid "" "Change the effective user id and group id to that of USER.\n" "\n" " -, -l, --login make the shell a login shell\n" " -c, --commmand=COMMAND pass a single COMMAND to the shell with -c\n" " -f, --fast pass -f to the shell (for csh or tcsh)\n" " -m, --preserve-environment do not reset environment variables\n" " -p same as -m\n" " -s, --shell=SHELL run SHELL if /etc/shells allows it\n" msgstr "" #: src/su.c:449 msgid "" "\n" "A mere - implies -l. If USER not given, assume root.\n" msgstr "" #: src/su.c:530 #, c-format msgid "user %s does not exist" msgstr "" #: src/su.c:553 msgid "incorrect password" msgstr "" #: src/su.c:570 #, c-format msgid "using restricted shell %s" msgstr "" #: src/su.c:581 #, fuzzy, c-format msgid "warning: cannot change directory to %s" msgstr "无法进入目录 %s" #: src/sum.c:35 #, fuzzy msgid "Kayvan Aghaiepour and David MacKenzie" msgstr "Mike Parker 和 David MacKenzie" #: src/sum.c:63 msgid "" "Print checksum and block counts for each FILE.\n" "\n" " -r defeat -s, use BSD sum algorithm, use 1K blocks\n" " -s, --sysv use System V sum algorithm, use 512 bytes blocks\n" msgstr "" #: src/sync.c:45 msgid "" "Force changed blocks to disk, update the super block.\n" "\n" msgstr "" "强迫将已更改的数据写入磁盘，并更新 super block。\n" "\n" #: src/sync.c:71 src/tty.c:113 msgid "ignoring all arguments" msgstr "忽略任何参数" #: src/sys2.h:469 msgid " --help display this help and exit\n" msgstr " --help 显示此帮助信息并离开\n" #: src/sys2.h:471 msgid " --version output version information and exit\n" msgstr " --version 显示版本信息并离开\n" #: src/tac.c:53 #, fuzzy msgid "Jay Lepreau and David MacKenzie" msgstr "Mike Parker 和 David MacKenzie" #: src/tac.c:130 msgid "" "Write each FILE to standard output, last line first.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/tac.c:138 msgid "" " -b, --before attach the separator before instead of after\n" " -r, --regex interpret the separator as a regular expression\n" " -s, --separator=STRING use STRING as the separator instead of newline\n" msgstr "" #: src/tac.c:229 #, fuzzy, c-format msgid "%s: seek failed" msgstr "strip 出现错误" #: src/tac.c:452 src/tac.c:591 msgid "stdin: read error" msgstr "" #: src/tac.c:638 msgid "separator cannot be empty" msgstr "" #: src/tail.c:49 #, fuzzy msgid "Paul Rubin, David MacKenzie, Ian Lance Taylor, and Jim Meyering" msgstr "Mike Parker、David MacKenzie 和 Jim Meyering" #: src/tail.c:238 #, c-format msgid "" "Print the last %d lines of each FILE to standard output.\n" "With more than one FILE, precede each with a header giving the file name.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/tail.c:247 msgid "" " --retry keep trying to open a file even if it is\n" " inaccessible when tail starts or if it becomes\n" " inaccessible later -- useful only with -f\n" " -c, --bytes=N output the last N bytes\n" msgstr "" #: src/tail.c:253 msgid "" " -f, --follow[={name|descriptor}]\n" " output appended data as the file grows;\n" " -f, --follow, and --follow=descriptor are\n" " equivalent\n" " -F same as --follow=name --retry\n" msgstr "" #: src/tail.c:260 #, c-format msgid "" " -n, --lines=N output the last N lines, instead of the last %d\n" " --max-unchanged-stats=N\n" " with --follow=name, reopen a FILE which has not\n" " changed size after N (default %d) iterations\n" " to see if it has been unlinked or renamed\n" " (this is the usual case of rotated log files)\n" msgstr "" #: src/tail.c:271 msgid "" " --pid=PID with -f, terminate after process ID, PID dies\n" " -q, --quiet, --silent never output headers giving file names\n" " -s, --sleep-interval=S with -f, sleep for approximately S seconds\n" " (default 1.0) between iterations.\n" " -v, --verbose always output headers giving file names\n" msgstr "" #: src/tail.c:280 msgid "" "\n" "If the first character of N (the number of bytes or lines) is a `+',\n" "print beginning with the Nth item from the start of each file, otherwise,\n" "print the last N items in the file. N may have a multiplier suffix:\n" "b 512, k 1024, m 1024*1024.\n" "\n" msgstr "" #: src/tail.c:288 msgid "" "With --follow (-f), tail defaults to following the file descriptor, which\n" "means that even if a tail'ed file is renamed, tail will continue to track\n" "its end. " msgstr "" #: src/tail.c:293 msgid "" "This default behavior is not desirable when you really want to\n" "track the actual name of the file, not the file descriptor (e.g., log\n" "rotation). Use --follow=name in that case. That causes tail to track the\n" "named file by reopening it periodically to see if it has been removed and\n" "recreated by some other program.\n" msgstr "" #: src/tail.c:331 #, fuzzy, c-format msgid "closing %s (fd=%d)" msgstr "正在关闭%s" #: src/tail.c:396 #, fuzzy, c-format msgid "%s: cannot seek to relative offset %s" msgstr "无法创建 fifo 文件%s" #: src/tail.c:400 #, fuzzy, c-format msgid "%s: cannot seek to end-relative offset %s" msgstr "无法创建 fifo 文件%s" #: src/tail.c:848 #, c-format msgid "`%s' has become inaccessible" msgstr "" #: src/tail.c:865 #, c-format msgid "`%s' has been replaced with an untailable file; giving up on this name" msgstr "" #: src/tail.c:886 #, c-format msgid "`%s' has become accessible" msgstr "" #: src/tail.c:894 #, c-format msgid "`%s' has appeared; following end of new file" msgstr "" #: src/tail.c:905 #, c-format msgid "`%s' has been replaced; following end of new file" msgstr "" #: src/tail.c:1030 #, fuzzy, c-format msgid "%s: file truncated" msgstr "%s：截断文件时出现错误" #: src/tail.c:1050 #, fuzzy msgid "no files remaining" msgstr "缺少了文件参数" #: src/tail.c:1277 #, c-format msgid "%s: cannot follow end of this type of file; giving up on this name" msgstr "" #: src/tail.c:1401 #, fuzzy, c-format msgid "%c: invalid suffix character in obsolescent option" msgstr "权限模式字串 %2$s 中出现无效的字符 %1$s" #: src/tail.c:1450 #, c-format msgid "" "too many arguments; When using tail's obsolescent option syntax (%s)\n" "there may be no more than one file argument. Use the equivalent -n or -c\n" "option instead." msgstr "" #: src/tail.c:1459 #, c-format msgid "" "Warning: it is not portable to use two or more file arguments with\n" "tail's obsolescent option syntax (%s). Use the equivalent -n or -c\n" "option instead." msgstr "" #: src/tail.c:1468 #, c-format msgid "`%s' option is obsolete; use `%s-%c %.*s'" msgstr "" #: src/tail.c:1548 #, fuzzy, c-format msgid "%s: invalid maximum number of unchanged stats between opens" msgstr "%s：覆盖次数无效" #: src/tail.c:1560 #, fuzzy, c-format msgid "%s: invalid maximum number of consecutive size changes" msgstr "%s：覆盖次数无效" #: src/tail.c:1572 #, fuzzy, c-format msgid "%s: invalid PID" msgstr "%s：文件大小无效" #: src/tail.c:1587 #, fuzzy, c-format msgid "%s: invalid number of seconds" msgstr "%s：覆盖次数无效" #: src/tail.c:1606 msgid "warning: --retry is useful only when following by name" msgstr "" #: src/tail.c:1610 msgid "warning: PID ignored; --pid=PID is useful only when following" msgstr "" #: src/tail.c:1613 #, fuzzy msgid "warning: --pid=PID is not supported on this system" msgstr "此系统并不支持符号链接" #: src/tee.c:32 #, fuzzy msgid "Mike Parker, Richard M. Stallman, and David MacKenzie" msgstr "Richard Stallman 和 David MacKenzie" #: src/tee.c:63 msgid "" "Copy standard input to each FILE, and also to standard output.\n" "\n" " -a, --append append to the given FILEs, do not overwrite\n" " -i, --ignore-interrupts ignore interrupt signals\n" msgstr "" #: src/test.c:203 msgid "argument expected\n" msgstr "" #: src/test.c:211 #, fuzzy, c-format msgid "%s: integer expression expected\n" msgstr "转换无效：%s" #: src/test.c:341 msgid "')' expected\n" msgstr "" #: src/test.c:344 #, c-format msgid "')' expected, found %s\n" msgstr "" #: src/test.c:361 src/test.c:888 #, c-format msgid "%s: unary operator expected\n" msgstr "" #: src/test.c:411 msgid "before -lt" msgstr "" #: src/test.c:419 msgid "after -lt" msgstr "" #: src/test.c:433 msgid "before -le" msgstr "" #: src/test.c:440 msgid "after -le" msgstr "" #: src/test.c:456 msgid "before -gt" msgstr "" #: src/test.c:463 msgid "after -gt" msgstr "" #: src/test.c:477 msgid "before -ge" msgstr "" #: src/test.c:484 msgid "after -ge" msgstr "" #: src/test.c:499 msgid "-nt does not accept -l\n" msgstr "" #: src/test.c:513 msgid "before -ne" msgstr "" #: src/test.c:520 msgid "after -ne" msgstr "" #: src/test.c:536 msgid "before -eq" msgstr "" #: src/test.c:543 msgid "after -eq" msgstr "" #: src/test.c:554 msgid "-ef does not accept -l\n" msgstr "" #: src/test.c:573 msgid "-ot does not accept -l\n" msgstr "" #: src/test.c:582 #, fuzzy msgid "unknown binary operator\n" msgstr "未知的系统错误" #: src/test.c:768 msgid "after -t" msgstr "" #: src/test.c:916 #, c-format msgid "%s: binary operator expected\n" msgstr "" #: src/test.c:976 #, fuzzy msgid "" "Usage: test EXPRESSION\n" " or: [ EXPRESSION ]\n" " or: [ OPTION\n" "Exit with the status determined by EXPRESSION.\n" "\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/test.c:985 msgid "" "\n" "EXPRESSION is true or false and sets exit status. It is one of:\n" msgstr "" #: src/test.c:989 msgid "" "\n" " ( EXPRESSION ) EXPRESSION is true\n" " ! EXPRESSION EXPRESSION is false\n" " EXPRESSION1 -a EXPRESSION2 both EXPRESSION1 and EXPRESSION2 are true\n" " EXPRESSION1 -o EXPRESSION2 either EXPRESSION1 or EXPRESSION2 is true\n" msgstr "" #: src/test.c:996 msgid "" "\n" " [-n] STRING the length of STRING is nonzero\n" " -z STRING the length of STRING is zero\n" " STRING1 = STRING2 the strings are equal\n" " STRING1 != STRING2 the strings are not equal\n" msgstr "" #: src/test.c:1003 msgid "" "\n" " INTEGER1 -eq INTEGER2 INTEGER1 is equal to INTEGER2\n" " INTEGER1 -ge INTEGER2 INTEGER1 is greater than or equal to INTEGER2\n" " INTEGER1 -gt INTEGER2 INTEGER1 is greater than INTEGER2\n" " INTEGER1 -le INTEGER2 INTEGER1 is less than or equal to INTEGER2\n" " INTEGER1 -lt INTEGER2 INTEGER1 is less than INTEGER2\n" " INTEGER1 -ne INTEGER2 INTEGER1 is not equal to INTEGER2\n" msgstr "" #: src/test.c:1012 msgid "" "\n" " FILE1 -ef FILE2 FILE1 and FILE2 have the same device and inode numbers\n" " FILE1 -nt FILE2 FILE1 is newer (modification date) than FILE2\n" " FILE1 -ot FILE2 FILE1 is older than FILE2\n" msgstr "" #: src/test.c:1018 msgid "" "\n" " -b FILE FILE exists and is block special\n" " -c FILE FILE exists and is character special\n" " -d FILE FILE exists and is a directory\n" " -e FILE FILE exists\n" msgstr "" #: src/test.c:1025 msgid "" " -f FILE FILE exists and is a regular file\n" " -g FILE FILE exists and is set-group-ID\n" " -h FILE FILE exists and is a symbolic link (same as -L)\n" " -G FILE FILE exists and is owned by the effective group ID\n" " -k FILE FILE exists and has its sticky bit set\n" msgstr "" #: src/test.c:1032 msgid "" " -L FILE FILE exists and is a symbolic link (same as -h)\n" " -O FILE FILE exists and is owned by the effective user ID\n" " -p FILE FILE exists and is a named pipe\n" " -r FILE FILE exists and is readable\n" " -s FILE FILE exists and has a size greater than zero\n" msgstr "" #: src/test.c:1039 msgid "" " -S FILE FILE exists and is a socket\n" " -t [FD] file descriptor FD (stdout by default) is opened on a " "terminal\n" " -u FILE FILE exists and its set-user-ID bit is set\n" " -w FILE FILE exists and is writable\n" " -x FILE FILE exists and is executable\n" msgstr "" #: src/test.c:1046 msgid "" "\n" "Beware that parentheses need to be escaped (e.g., by backslashes) for " "shells.\n" "INTEGER may also be -l STRING, which evaluates to the length of STRING.\n" msgstr "" #: src/test.c:1061 msgid "Kevin Braunsdorf and Matthew Bradburn" msgstr "" #: src/test.c:1105 msgid "missing `]'\n" msgstr "" #: src/test.c:1120 #, fuzzy msgid "too many arguments\n" msgstr "参数太多" #: src/touch.c:39 #, fuzzy msgid "" "Paul Rubin, Arnold Robbins, Jim Kingdon, David MacKenzie, and Randy Smith" msgstr "Richard Stallman 和 David MacKenzie" #: src/touch.c:148 src/touch.c:164 #, c-format msgid "creating %s" msgstr "正在创建目录 %s" #: src/touch.c:207 #, fuzzy, c-format msgid "cannot touch %s" msgstr "无法解除%s的链接" #: src/touch.c:213 #, c-format msgid "setting times of %s" msgstr "正在设定 %s 的时间" #: src/touch.c:230 msgid "" "Update the access and modification times of each FILE to the current time.\n" "\n" msgstr "将每个<文件>的访问及修改时间都更新为目前的时间。\n" #: src/touch.c:237 #, fuzzy msgid "" " -a change only the access time\n" " -c, --no-create do not create any files\n" " -d, --date=STRING parse STRING and use it instead of current time\n" " -f (ignored)\n" " -m change only the modification time\n" msgstr "" " -a 只更改访问时间\n" " -c, --no-create 不创建任何文件\n" " -d, --date=字串 使用<字串>表示的时间而不是目前的时间\n" " -f (此选项不作处理)\n" " -m 只更改修改时间\n" #: src/touch.c:244 msgid "" " -r, --reference=FILE use this file's times instead of current time\n" " -t STAMP use [[CC]YY]MMDDhhmm[.ss] instead of current time\n" " --time=WORD set time given by WORD: access atime use (same as -" "a)\n" " modify mtime (same as -m)\n" msgstr "" " -r, --reference=文件 使用指定<文件>的时间属性而非目前的时间\n" " -t STAMP 使用 [[CC]YY]MMDDhhmm[.ss] 格式的时间而非目前的时" "间\n" " --time=WORD 使用 WORD 指定的时间：access、atime、use 都等於 -a\n" " 选项的效果，而 modify、mtime 等於 -m 选项的效果\n" #: src/touch.c:252 msgid "" "\n" "Note that the -d and -t options accept different time-date formats.\n" msgstr "" "\n" "请注意，-d 和 -t 选项可接受不同的时间/日期格式。\n" #: src/touch.c:297 src/touch.c:317 #, c-format msgid "invalid date format %s" msgstr "日期格式 %s 无效" #: src/touch.c:341 msgid "cannot specify times from more than one source" msgstr "无法由多於一种的来源来指定时间" #: src/touch.c:364 #, c-format msgid "" "warning: `touch %s' is obsolete; use `touch -t %04d%02d%02d%02d%02d.%02d'" msgstr "警告：‘touch %s’已经过时；请使用‘touch -t %04d%02d%02d%02d%02d.%02d’" #: src/touch.c:385 msgid "file arguments missing" msgstr "缺少了文件参数" #: src/tr.c:325 #, fuzzy, c-format msgid "Usage: %s [OPTION]... SET1 [SET2]\n" msgstr "用法：%s [选项]... [文件]\n" #: src/tr.c:329 msgid "" "Translate, squeeze, and/or delete characters from standard input,\n" "writing to standard output.\n" "\n" " -c, --complement first complement SET1\n" " -d, --delete delete characters in SET1, do not translate\n" " -s, --squeeze-repeats replace each input sequence of a repeated " "character\n" " that is listed in SET1 with a single occurrence\n" " of that character\n" " -t, --truncate-set1 first truncate SET1 to length of SET2\n" msgstr "" #: src/tr.c:342 msgid "" "\n" "SETs are specified as strings of characters. Most represent themselves.\n" "Interpreted sequences are:\n" "\n" " \\NNN character with octal value NNN (1 to 3 octal digits)\n" " \\\\ backslash\n" " \\a audible BEL\n" " \\b backspace\n" " \\f form feed\n" " \\n new line\n" " \\r return\n" " \\t horizontal tab\n" msgstr "" #: src/tr.c:356 msgid "" " \\v vertical tab\n" " CHAR1-CHAR2 all characters from CHAR1 to CHAR2 in ascending order\n" " [CHAR*] in SET2, copies of CHAR until length of SET1\n" " [CHAR*REPEAT] REPEAT copies of CHAR, REPEAT octal if starting with 0\n" " [:alnum:] all letters and digits\n" " [:alpha:] all letters\n" " [:blank:] all horizontal whitespace\n" " [:cntrl:] all control characters\n" " [:digit:] all digits\n" msgstr "" #: src/tr.c:367 msgid "" " [:graph:] all printable characters, not including space\n" " [:lower:] all lower case letters\n" " [:print:] all printable characters, including space\n" " [:punct:] all punctuation characters\n" " [:space:] all horizontal or vertical whitespace\n" " [:upper:] all upper case letters\n" " [:xdigit:] all hexadecimal digits\n" " [=CHAR=] all characters which are equivalent to CHAR\n" msgstr "" #: src/tr.c:377 msgid "" "\n" "Translation occurs if -d is not given and both SET1 and SET2 appear.\n" "-t may be used only when translating. SET2 is extended to length of\n" "SET1 by repeating its last character as necessary. " msgstr "" #: src/tr.c:383 msgid "" "Excess characters\n" "of SET2 are ignored. Only [:lower:] and [:upper:] are guaranteed to\n" "expand in ascending order; used in SET2 while translating, they may\n" "only be used in pairs to specify case conversion. " msgstr "" #: src/tr.c:389 msgid "" "-s uses SET1 if not\n" "translating nor deleting; else squeezing uses SET2 and occurs after\n" "translation or deletion.\n" msgstr "" #: src/tr.c:555 #, c-format msgid "" "warning: the ambiguous octal escape \\%c%c%c is being\n" "\tinterpreted as the 2-byte sequence \\0%c%c, `%c'" msgstr "" #: src/tr.c:564 #, fuzzy msgid "invalid backslash escape at end of string" msgstr "权限模式字串 %2$s 中出现无效的字符 %1$s" #: src/tr.c:570 #, c-format msgid "invalid backslash escape `\\%c'" msgstr "" #: src/tr.c:723 #, c-format msgid "range-endpoints of `%s-%s' are in reverse collating sequence order" msgstr "" #: src/tr.c:904 #, c-format msgid "invalid repeat count `%s' in [c*n] construct" msgstr "" #: src/tr.c:997 msgid "missing character class name `[::]'" msgstr "" #: src/tr.c:1000 msgid "missing equivalence class character `[==]'" msgstr "" #: src/tr.c:1023 #, fuzzy, c-format msgid "invalid character class `%s'" msgstr "权限模式字串 %2$s 中出现无效的字符 %1$s" #: src/tr.c:1048 #, c-format msgid "%s: equivalence class operand must be a single character" msgstr "" #: src/tr.c:1520 msgid "the [c*] repeat construct may not appear in string1" msgstr "" #: src/tr.c:1530 msgid "only one [c*] repeat construct may appear in string2" msgstr "" #: src/tr.c:1538 msgid "[=c=] expressions may not appear in string2 when translating" msgstr "" #: src/tr.c:1551 msgid "when not truncating set1, string2 must be non-empty" msgstr "" #: src/tr.c:1560 msgid "" "when translating with complemented character classes,\n" "string2 must map all characters in the domain to one" msgstr "" #: src/tr.c:1567 msgid "" "when translating, the only character classes that may appear in\n" "string2 are `upper' and `lower'" msgstr "" #: src/tr.c:1576 msgid "the [c*] construct may appear in string2 only when translating" msgstr "" #: src/tr.c:1852 msgid "two strings must be given when translating" msgstr "" #: src/tr.c:1855 msgid "two strings must be given when both deleting and squeezing repeats" msgstr "" #: src/tr.c:1869 msgid "only one string may be given when deleting without squeezing repeats" msgstr "" #: src/tr.c:1875 msgid "at least one string must be given when squeezing repeats" msgstr "" #: src/tr.c:1966 msgid "misaligned [:upper:] and/or [:lower:] construct" msgstr "" #: src/tr.c:1989 msgid "" "invalid identity mapping; when translating, any [:lower:] or [:upper:]\n" "construct in string1 must be aligned with a corresponding construct\n" "([:upper:] or [:lower:], respectively) in string2" msgstr "" #: src/true.c:32 #, c-format msgid "" "Usage: %s [ignored command line arguments]\n" " or: %s OPTION\n" "Exit with a status code indicating success.\n" "\n" "These option names may not be abbreviated.\n" "\n" msgstr "" #: src/tsort.c:96 #, c-format msgid "" "Usage: %s [OPTION] [FILE]\n" "Write totally ordered list consistent with the partial ordering in FILE.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/tsort.c:494 #, fuzzy, c-format msgid "%s: input contains an odd number of tokens" msgstr "%s：覆盖次数无效" #: src/tsort.c:536 #, c-format msgid "%s: input contains a loop:" msgstr "" #: src/tsort.c:578 msgid "only one argument may be specified" msgstr "" #: src/tty.c:63 msgid "" "Print the file name of the terminal connected to standard input.\n" "\n" " -s, --silent, --quiet print nothing, only return an exit status\n" msgstr "" #: src/tty.c:121 msgid "not a tty" msgstr "" #: src/uname.c:110 msgid "" "Print certain system information. With no OPTION, same as -s.\n" "\n" " -a, --all print all information, in the following order:\n" " -s, --kernel-name print the kernel name\n" " -n, --nodename print the network node hostname\n" " -r, --kernel-release print the kernel release\n" msgstr "" #: src/uname.c:118 msgid "" " -v, --kernel-version print the kernel version\n" " -m, --machine print the machine hardware name\n" " -p, --processor print the processor type\n" " -i, --hardware-platform print the hardware platform\n" " -o, --operating-system print the operating system\n" msgstr "" #: src/uname.c:229 msgid "cannot get system name" msgstr "" #: src/unexpand.c:151 msgid "tab size contains an invalid character" msgstr "" #: src/unexpand.c:377 msgid "" "Convert spaces in each FILE to tabs, writing to standard output.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/unexpand.c:385 msgid "" " -a, --all convert all whitespace, instead of just initial " "whitespace\n" " --first-only convert only leading sequences of whitespace (overrides -" "a)\n" " -t, --tabs=N have tabs N characters apart instead of 8 (enables -a)\n" " -t, --tabs=LIST use comma separated LIST of tab positions (enables -a)\n" msgstr "" #: src/unexpand.c:463 msgid "`-LIST' option is obsolete; use `--first-only -t LIST'" msgstr "" #: src/uniq.c:134 #, fuzzy, c-format msgid "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n" msgstr "用法：%s [选项]... [文件]\n" #: src/uniq.c:138 msgid "" "Discard all but one of successive identical lines from INPUT (or\n" "standard input), writing to OUTPUT (or standard output).\n" "\n" msgstr "" #: src/uniq.c:146 msgid "" " -c, --count prefix lines by the number of occurrences\n" " -d, --repeated only print duplicate lines\n" msgstr "" #: src/uniq.c:150 msgid "" " -D, --all-repeated[=delimit-method] print all duplicate lines\n" " delimit-method={none(default),prepend,separate}\n" " Delimiting is done with blank lines.\n" " -f, --skip-fields=N avoid comparing the first N fields\n" " -i, --ignore-case ignore differences in case when comparing\n" " -s, --skip-chars=N avoid comparing the first N characters\n" " -u, --unique only print unique lines\n" msgstr "" #: src/uniq.c:159 msgid " -w, --check-chars=N compare no more than N characters in lines\n" msgstr "" #: src/uniq.c:164 msgid "" "\n" "A field is a run of whitespace, then non-whitespace characters.\n" "Fields are skipped before chars.\n" msgstr "" #: src/uniq.c:432 src/uniq.c:449 #, c-format msgid "extra operand `%s'" msgstr "" #: src/uniq.c:472 src/uniq.c:498 #, fuzzy msgid "invalid number of fields to skip" msgstr "%s：覆盖次数无效" #: src/uniq.c:507 #, fuzzy msgid "invalid number of bytes to skip" msgstr "%s：覆盖次数无效" #: src/uniq.c:516 #, fuzzy msgid "invalid number of bytes to compare" msgstr "%s：覆盖次数无效" #: src/uniq.c:530 #, c-format msgid "`-%lu' option is obsolete; use `-f %lu'" msgstr "" #: src/uniq.c:538 msgid "printing all duplicated lines and repeat counts is meaningless" msgstr "" #: src/unlink.c:51 #, c-format msgid "" "Usage: %s FILE\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/unlink.c:54 msgid "" "Call the unlink function to remove the specified FILE.\n" "\n" msgstr "" #: src/unlink.c:100 #, c-format msgid "cannot unlink %s" msgstr "无法解除%s的链接" #: src/uptime.c:128 msgid "couldn't get boot time" msgstr "" #: src/uptime.c:135 #, c-format msgid " %2d:%02d%s up " msgstr "" #: src/uptime.c:139 msgid "am" msgstr "" #: src/uptime.c:139 msgid "pm" msgstr "" #: src/uptime.c:141 #, c-format msgid "%d day" msgid_plural "%d days" msgstr[0] "" msgstr[1] "" #: src/uptime.c:143 #, fuzzy, c-format msgid "%d user" msgid_plural "%d users" msgstr[0] "无效的用户" msgstr[1] "无效的用户" #: src/uptime.c:156 #, c-format msgid ", load average: %.2f" msgstr "" #: src/uptime.c:190 src/users.c:117 #, fuzzy, c-format msgid "Usage: %s [OPTION]... [ FILE ]\n" msgstr "用法：%s [选项]... [文件]\n" #: src/uptime.c:191 #, c-format msgid "" "Print the current time, the length of time the system has been up,\n" "the number of users on the system, and the average number of jobs\n" "in the run queue over the last 1, 5 and 15 minutes.\n" "If FILE is not specified, use %s. %s as FILE is common.\n" "\n" msgstr "" #: src/users.c:34 #, fuzzy msgid "Joseph Arceneaux and David MacKenzie" msgstr "Mike Parker 和 David MacKenzie" #: src/users.c:118 #, c-format msgid "" "Output who is currently logged in according to FILE.\n" "If FILE is not specified, use %s. %s as FILE is common.\n" "\n" msgstr "" #: src/wc.c:74 #, fuzzy msgid "Paul Rubin and David MacKenzie" msgstr "Mike Parker 和 David MacKenzie" #: src/wc.c:139 msgid "" "Print newline, word, and byte counts for each FILE, and a total line if\n" "more than one FILE is specified. With no FILE, or when FILE is -,\n" "read standard input.\n" " -c, --bytes print the byte counts\n" " -m, --chars print the character counts\n" " -l, --lines print the newline counts\n" msgstr "" #: src/wc.c:147 msgid "" " -L, --max-line-length print the length of the longest line\n" " -w, --words print the word counts\n" msgstr "" #: src/who.c:40 #, fuzzy msgid "Joseph Arceneaux, David MacKenzie, and Michael Stone" msgstr "Mike Parker、David MacKenzie 和 Jim Meyering" #: src/who.c:222 msgid " old " msgstr "" #: src/who.c:432 src/who.c:435 msgid "id=" msgstr "" #: src/who.c:448 src/who.c:453 msgid "term=" msgstr "" #: src/who.c:450 src/who.c:454 msgid "exit=" msgstr "" #: src/who.c:491 msgid "clock change" msgstr "" #: src/who.c:503 src/who.c:504 msgid "run-level" msgstr "" #: src/who.c:507 src/who.c:508 msgid "last=" msgstr "" #: src/who.c:537 #, c-format msgid "" "\n" "# users=%u\n" msgstr "" #: src/who.c:543 msgid "NAME" msgstr "" #: src/who.c:543 msgid "LINE" msgstr "" #: src/who.c:543 msgid "TIME" msgstr "" #: src/who.c:543 msgid "IDLE" msgstr "" #: src/who.c:543 msgid "PID" msgstr "" #: src/who.c:544 msgid "COMMENT" msgstr "" #: src/who.c:544 msgid "EXIT" msgstr "" #: src/who.c:619 #, fuzzy, c-format msgid "Usage: %s [OPTION]... [ FILE | ARG1 ARG2 ]\n" msgstr "用法：%s [选项]... [文件]\n" #: src/who.c:620 msgid "" "\n" " -a, --all same as -b -d --login -p -r -t -T -u\n" " -b, --boot time of last system boot\n" " -d, --dead print dead processes\n" " -H, --heading print line of column headings\n" msgstr "" #: src/who.c:627 msgid "" " -i, --idle add idle time as HOURS:MINUTES, . or old\n" " (deprecated, use -u)\n" " --login print system login processes\n" " (equivalent to SUS -l)\n" msgstr "" #: src/who.c:633 msgid "" " -l, --lookup attempt to canonicalize hostnames via DNS\n" " (-l is deprecated, use --lookup)\n" " -m only hostname and user associated with stdin\n" " -p, --process print active processes spawned by init\n" msgstr "" #: src/who.c:639 msgid "" " -q, --count all login names and number of users logged on\n" " -r, --runlevel print current runlevel\n" " -s, --short print only name, line, and time (default)\n" " -t, --time print last system clock change\n" msgstr "" #: src/who.c:645 msgid "" " -T, -w, --mesg add user's message status as +, - or ?\n" " -u, --users list users logged in\n" " --message same as -T\n" " --writable same as -T\n" msgstr "" #: src/who.c:653 #, c-format msgid "" "\n" "If FILE is not specified, use %s. %s as FILE is common.\n" "If ARG1 ARG2 given, -m presumed: `am i' or `mom likes' are usual.\n" msgstr "" #: src/who.c:757 #, fuzzy msgid "Warning: -i will be removed in a future release; use -u instead" msgstr "" "警告：--version-control (-V) 选项已经过时；将来的版本随时可能不再支持\n" "此选项。请使用 --backup=%s。" #: src/who.c:768 msgid "" "Warning: the meaning of '-l' will change in a future release to conform to " "POSIX" msgstr "" #: src/whoami.c:52 msgid "" "Print the user name associated with the current effective user id.\n" "Same as id -un.\n" "\n" msgstr "" #: src/whoami.c:104 #, c-format msgid "%s: cannot find username for UID %u\n" msgstr "" #: src/yes.c:49 #, fuzzy, c-format msgid "" "Usage: %s [STRING]...\n" " or: %s OPTION\n" msgstr "" "用法：%s 文件\n" " 或：%s 选项\n" #: src/yes.c:55 msgid "" "Repeatedly output a line with all specified STRING(s), or `y'.\n" "\n" msgstr "" #~ msgid "unable to restore permissions of %s" #~ msgstr "无法回复 %s 的权限" #, fuzzy #~ msgid "invalid number" #~ msgstr "无效的号码 %s" #, fuzzy #~ msgid "\\%c: invalid escape" #~ msgstr "%s：文件大小无效" #~ msgid "program error" #~ msgstr "程序错误" #~ msgid "stack overflow" #~ msgstr "堆栈溢出" #~ msgid " Type" #~ msgstr " 类型" #, fuzzy #~ msgid "cannot convert time" #~ msgstr "stat%s失败" #, fuzzy #~ msgid "cannot format time" #~ msgstr "stat%s失败" #~ msgid "cannot change to `..' from directory %s" #~ msgstr "无法由目录 %s 进入‘..’" #~ msgid "missing file arguments" #~ msgstr "缺少了文件参数" #, fuzzy #~ msgid "environment variable, QUOTING_STYLE" #~ msgstr "忽略无效的环境变量 QUOTING_STYLE 的变量值：%s" #, fuzzy #~ msgid "cannot execute %s" #~ msgstr "无法 lseek%s" #~ msgid "Try %s --help' for more information.\n" #~ msgstr "请尝试执行‘%s --help’来获取更多信息。\n"