# Makefile.in generated by automake 1.9.5 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/stamp-vti $(srcdir)/version.texi ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acl.m4 $(top_srcdir)/m4/afs.m4 \
	$(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/allocsa.m4 \
	$(top_srcdir)/m4/argmatch.m4 $(top_srcdir)/m4/assert.m4 \
	$(top_srcdir)/m4/atexit.m4 $(top_srcdir)/m4/backupfile.m4 \
	$(top_srcdir)/m4/basename.m4 $(top_srcdir)/m4/bison.m4 \
	$(top_srcdir)/m4/boottime.m4 $(top_srcdir)/m4/c-strtod.m4 \
	$(top_srcdir)/m4/calloc.m4 $(top_srcdir)/m4/canon-host.m4 \
	$(top_srcdir)/m4/canonicalize.m4 \
	$(top_srcdir)/m4/chdir-long.m4 $(top_srcdir)/m4/check-decl.m4 \
	$(top_srcdir)/m4/chown.m4 $(top_srcdir)/m4/clock_time.m4 \
	$(top_srcdir)/m4/cloexec.m4 $(top_srcdir)/m4/closeout.m4 \
	$(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/cycle-check.m4 \
	$(top_srcdir)/m4/d-ino.m4 $(top_srcdir)/m4/d-type.m4 \
	$(top_srcdir)/m4/dirfd.m4 $(top_srcdir)/m4/dirname.m4 \
	$(top_srcdir)/m4/dos.m4 $(top_srcdir)/m4/dup2.m4 \
	$(top_srcdir)/m4/eealloc.m4 $(top_srcdir)/m4/eoverflow.m4 \
	$(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/euidaccess.m4 \
	$(top_srcdir)/m4/exclude.m4 $(top_srcdir)/m4/exitfail.m4 \
	$(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/file-type.m4 \
	$(top_srcdir)/m4/fileblocks.m4 $(top_srcdir)/m4/filemode.m4 \
	$(top_srcdir)/m4/fnmatch.m4 $(top_srcdir)/m4/fpending.m4 \
	$(top_srcdir)/m4/free.m4 $(top_srcdir)/m4/fstypename.m4 \
	$(top_srcdir)/m4/fsusage.m4 $(top_srcdir)/m4/ftruncate.m4 \
	$(top_srcdir)/m4/fts.m4 $(top_srcdir)/m4/getcwd-path-max.m4 \
	$(top_srcdir)/m4/getcwd.m4 $(top_srcdir)/m4/getdate.m4 \
	$(top_srcdir)/m4/getgroups.m4 $(top_srcdir)/m4/gethostname.m4 \
	$(top_srcdir)/m4/gethrxtime.m4 $(top_srcdir)/m4/getline.m4 \
	$(top_srcdir)/m4/getndelim2.m4 $(top_srcdir)/m4/getopt.m4 \
	$(top_srcdir)/m4/getpagesize.m4 $(top_srcdir)/m4/getpass.m4 \
	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gettime.m4 \
	$(top_srcdir)/m4/gettimeofday.m4 \
	$(top_srcdir)/m4/getugroups.m4 \
	$(top_srcdir)/m4/getusershell.m4 $(top_srcdir)/m4/glibc21.m4 \
	$(top_srcdir)/m4/group-member.m4 \
	$(top_srcdir)/m4/hard-locale.m4 $(top_srcdir)/m4/hash-pjw.m4 \
	$(top_srcdir)/m4/hash.m4 $(top_srcdir)/m4/host-os.m4 \
	$(top_srcdir)/m4/human.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/idcache.m4 $(top_srcdir)/m4/intmax_t.m4 \
	$(top_srcdir)/m4/inttostr.m4 $(top_srcdir)/m4/inttypes-pri.m4 \
	$(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/inttypes_h.m4 \
	$(top_srcdir)/m4/jm-macros.m4 $(top_srcdir)/m4/jm-winsz1.m4 \
	$(top_srcdir)/m4/jm-winsz2.m4 $(top_srcdir)/m4/lchown.m4 \
	$(top_srcdir)/m4/lib-check.m4 $(top_srcdir)/m4/lib-ld.m4 \
	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
	$(top_srcdir)/m4/linebuffer.m4 $(top_srcdir)/m4/link-follow.m4 \
	$(top_srcdir)/m4/localcharset.m4 \
	$(top_srcdir)/m4/long-options.m4 \
	$(top_srcdir)/m4/longdouble.m4 $(top_srcdir)/m4/longlong.m4 \
	$(top_srcdir)/m4/ls-mntd-fs.m4 $(top_srcdir)/m4/makepath.m4 \
	$(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbstate_t.m4 \
	$(top_srcdir)/m4/mbswidth.m4 $(top_srcdir)/m4/md5.m4 \
	$(top_srcdir)/m4/memcasecmp.m4 $(top_srcdir)/m4/memchr.m4 \
	$(top_srcdir)/m4/memcmp.m4 $(top_srcdir)/m4/memcoll.m4 \
	$(top_srcdir)/m4/memcpy.m4 $(top_srcdir)/m4/memmove.m4 \
	$(top_srcdir)/m4/mempcpy.m4 $(top_srcdir)/m4/memrchr.m4 \
	$(top_srcdir)/m4/memset.m4 $(top_srcdir)/m4/mkdir-slash.m4 \
	$(top_srcdir)/m4/mkstemp.m4 $(top_srcdir)/m4/mktime.m4 \
	$(top_srcdir)/m4/modechange.m4 $(top_srcdir)/m4/mountlist.m4 \
	$(top_srcdir)/m4/nanosleep.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/obstack.m4 $(top_srcdir)/m4/onceonly_2_57.m4 \
	$(top_srcdir)/m4/openat.m4 $(top_srcdir)/m4/path-concat.m4 \
	$(top_srcdir)/m4/pathmax.m4 $(top_srcdir)/m4/perl.m4 \
	$(top_srcdir)/m4/physmem.m4 $(top_srcdir)/m4/po.m4 \
	$(top_srcdir)/m4/posixtm.m4 $(top_srcdir)/m4/posixver.m4 \
	$(top_srcdir)/m4/prereq.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/m4/putenv.m4 $(top_srcdir)/m4/quote.m4 \
	$(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/readlink.m4 \
	$(top_srcdir)/m4/readtokens.m4 $(top_srcdir)/m4/readutmp.m4 \
	$(top_srcdir)/m4/regex.m4 $(top_srcdir)/m4/rename.m4 \
	$(top_srcdir)/m4/restrict.m4 $(top_srcdir)/m4/rmdir-errno.m4 \
	$(top_srcdir)/m4/rmdir.m4 $(top_srcdir)/m4/rpmatch.m4 \
	$(top_srcdir)/m4/safe-read.m4 $(top_srcdir)/m4/safe-write.m4 \
	$(top_srcdir)/m4/same.m4 $(top_srcdir)/m4/save-cwd.m4 \
	$(top_srcdir)/m4/savedir.m4 $(top_srcdir)/m4/setenv.m4 \
	$(top_srcdir)/m4/settime.m4 $(top_srcdir)/m4/sha1.m4 \
	$(top_srcdir)/m4/sig2str.m4 $(top_srcdir)/m4/signed.m4 \
	$(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/st_dm_mode.m4 \
	$(top_srcdir)/m4/st_mtim.m4 $(top_srcdir)/m4/stat-macros.m4 \
	$(top_srcdir)/m4/stat-prog.m4 $(top_srcdir)/m4/stdbool.m4 \
	$(top_srcdir)/m4/stdint_h.m4 $(top_srcdir)/m4/stdio-safer.m4 \
	$(top_srcdir)/m4/stpcpy.m4 $(top_srcdir)/m4/strcase.m4 \
	$(top_srcdir)/m4/strcspn.m4 $(top_srcdir)/m4/strdup.m4 \
	$(top_srcdir)/m4/strftime.m4 $(top_srcdir)/m4/stripslash.m4 \
	$(top_srcdir)/m4/strndup.m4 $(top_srcdir)/m4/strnlen.m4 \
	$(top_srcdir)/m4/strnumcmp.m4 $(top_srcdir)/m4/strpbrk.m4 \
	$(top_srcdir)/m4/strstr.m4 $(top_srcdir)/m4/strtod.m4 \
	$(top_srcdir)/m4/strtoimax.m4 $(top_srcdir)/m4/strtol.m4 \
	$(top_srcdir)/m4/strtoll.m4 $(top_srcdir)/m4/strtoul.m4 \
	$(top_srcdir)/m4/strtoull.m4 $(top_srcdir)/m4/strtoumax.m4 \
	$(top_srcdir)/m4/strverscmp.m4 $(top_srcdir)/m4/timespec.m4 \
	$(top_srcdir)/m4/tm_gmtoff.m4 $(top_srcdir)/m4/typeof.m4 \
	$(top_srcdir)/m4/tzset.m4 $(top_srcdir)/m4/uint32_t.m4 \
	$(top_srcdir)/m4/uintmax_t.m4 $(top_srcdir)/m4/uintptr_t.m4 \
	$(top_srcdir)/m4/ullong_max.m4 $(top_srcdir)/m4/ulonglong.m4 \
	$(top_srcdir)/m4/unicodeio.m4 $(top_srcdir)/m4/unistd-safer.m4 \
	$(top_srcdir)/m4/unlink-busy.m4 $(top_srcdir)/m4/unlinkdir.m4 \
	$(top_srcdir)/m4/unlocked-io.m4 $(top_srcdir)/m4/uptime.m4 \
	$(top_srcdir)/m4/userspec.m4 $(top_srcdir)/m4/utimbuf.m4 \
	$(top_srcdir)/m4/utime.m4 $(top_srcdir)/m4/utimecmp.m4 \
	$(top_srcdir)/m4/utimens.m4 $(top_srcdir)/m4/utimes-null.m4 \
	$(top_srcdir)/m4/utimes.m4 $(top_srcdir)/m4/vasnprintf.m4 \
	$(top_srcdir)/m4/vasprintf.m4 $(top_srcdir)/m4/wchar_t.m4 \
	$(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \
	$(top_srcdir)/m4/xgetcwd.m4 $(top_srcdir)/m4/xnanosleep.m4 \
	$(top_srcdir)/m4/xreadlink.m4 $(top_srcdir)/m4/xstrtod.m4 \
	$(top_srcdir)/m4/xstrtoimax.m4 $(top_srcdir)/m4/xstrtol.m4 \
	$(top_srcdir)/m4/xstrtoumax.m4 $(top_srcdir)/m4/yesno.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/build-aux/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/coreutils.info
TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
DVIS = coreutils.dvi
PDFS = coreutils.pdf
PSS = coreutils.ps
HTMLS = coreutils.html
TEXINFOS = coreutils.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__installdirs = "$(DESTDIR)$(infodir)"
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
ALLOCA_H = @ALLOCA_H@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFAULT_POSIX2_VERSION = @DEFAULT_POSIX2_VERSION@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DF_PROG = @DF_PROG@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EOVERFLOW = @EOVERFLOW@
EXEEXT = @EXEEXT@
FESETROUND_LIBM = @FESETROUND_LIBM@
FNMATCH_H = @FNMATCH_H@
GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
GETOPT_H = @GETOPT_H@
GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
GNU_PACKAGE = @GNU_PACKAGE@
HAVE__BOOL = @HAVE__BOOL@
HELP2MAN = @HELP2MAN@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
KMEM_GROUP = @KMEM_GROUP@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIB_CLOCK_GETTIME = @LIB_CLOCK_GETTIME@
LIB_CRYPT = @LIB_CRYPT@
LIB_EACCESS = @LIB_EACCESS@
LIB_FDATASYNC = @LIB_FDATASYNC@
LIB_GETHRXTIME = @LIB_GETHRXTIME@
LIB_NANOSLEEP = @LIB_NANOSLEEP@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@

# The following is necessary if the package name is 8 characters or longer.
# If the info documentation would be split into 10 or more separate files,
# then this is necessary even if the package name is 7 characters long.
#
# Tell makeinfo to put everything in a single info file: <package>.info.
# Otherwise, it would also generate files with names like <package>.info-[123],
# and those names all map to one 14-byte name (<package>.info-) on some crufty
# old systems.
MAKEINFO = makeinfo --no-split
MAN = @MAN@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NEED_SETGID = @NEED_SETGID@
OBJEXT = @OBJEXT@
OPTIONAL_BIN_PROGS = @OPTIONAL_BIN_PROGS@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
POSUB = @POSUB@
POW_LIB = @POW_LIB@
RANLIB = @RANLIB@
SEQ_LIBM = @SEQ_LIBM@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STDBOOL_H = @STDBOOL_H@
STRIP = @STRIP@
U = @U@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
YACC = @YACC@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
info_TEXINFOS = coreutils.texi
EXTRA_DIST = perm.texi getdate.texi constants.texi doclicense.texi
MAINTAINERCLEANFILES = constants.texi

# Extended regular expressions to match word starts and ends.
_W = (^|[^A-Za-z0-9_])
W_ = ([^A-Za-z0-9_]|$$)
all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnits  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

.texi.info:
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && cd $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	  if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	done; \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ $<; \
	then \
	  rc=0; \
	  cd $(srcdir); \
	else \
	  rc=$$?; \
	  cd $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

.texi.dvi:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.texi.pdf:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $<

.texi.html:
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) $<; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/coreutils.info: coreutils.texi $(srcdir)/version.texi
coreutils.dvi: coreutils.texi $(srcdir)/version.texi
coreutils.pdf: coreutils.texi $(srcdir)/version.texi
coreutils.html: coreutils.texi $(srcdir)/version.texi
$(srcdir)/version.texi:  $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: coreutils.texi $(top_srcdir)/configure
	@(dir=.; test -f ./coreutils.texi || dir=$(srcdir); \
	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/coreutils.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp
	@cmp -s vti.tmp $(srcdir)/version.texi \
	  || (echo "Updating $(srcdir)/version.texi"; \
	      cp vti.tmp $(srcdir)/version.texi)
	-@rm -f vti.tmp
	@cp $(srcdir)/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp

maintainer-clean-vti:
	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
	$(DVIPS) -o $@ $<

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in $$d/$$base*; do \
	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	    test -f $(distdir)/$$relfile || \
	      cp -p $$file $(distdir)/$$relfile; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf coreutils.aux coreutils.cp coreutils.cps coreutils.fl coreutils.fn \
	  coreutils.ky coreutils.log coreutils.op coreutils.pg \
	  coreutils.tmp coreutils.toc coreutils.tp coreutils.tps \
	  coreutils.vr coreutils.dvi coreutils.pdf coreutils.ps \
	  coreutils.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS)
installdirs:
	for dir in "$(DESTDIR)$(infodir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am

install-exec-am:

install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-info-am

.PHONY: all all-am check check-am clean clean-generic dist-info \
	distclean distclean-generic distdir dvi dvi-am html html-am \
	info info-am install install-am install-data install-data-am \
	install-exec install-exec-am install-info install-info-am \
	install-man install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti mostlyclean \
	mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
	pdf-am ps ps-am uninstall uninstall-am uninstall-info-am


constants.texi: $(top_srcdir)/src/tail.c
	LC_ALL=C \
	sed -n -e 's/^#define \(DEFAULT_MAX[_A-Z]*\) \(.*\)/@set \1 \2/p' \
	  $(top_srcdir)/src/tail.c > t-$@
	mv t-$@ $@

$(DVIS): $(EXTRA_DIST)
$(INFO_DEPS): $(EXTRA_DIST)

# List words/regexps here that should not appear in the texinfo documentation.
# E.g., use @sc{nul}, not `NUL'
# and use `time zone', not `timezone'.
check-texinfo:
	fail=0; \
	grep timezone $(srcdir)/*.texi && fail=1; \
	$(EGREP) '$(_W)IO$(W_)' $(srcdir)/*.texi && fail=1; \
	grep non-zero $(srcdir)/*.texi && fail=1; \
	grep '@url{' $(srcdir)/*.texi && fail=1; \
	$(EGREP) '$(_W)NUL$(W_)' $(srcdir)/*.texi && fail=1; \
	grep '\$$@"' $(srcdir)/*.texi && fail=1; \
	grep -n '[^[:punct:]]@footnote' $(srcdir)/*.texi && fail=1; \
	grep -n filename $(srcdir)/*.texi|grep -vE 'setfilename|{filename}' \
	  && fail=1; \
	$(PERL) -e 1 2> /dev/null && { $(PERL) -ne \
	  '/\bPOSIX\b/ && !/\@acronym{POSIX}/ && !/^\* / || /{posix}/ and print,exit 1' \
	  $(srcdir)/*.texi 2> /dev/null || fail=1; }; \
	grep -iwE 'builtins?' $(srcdir)/*.texi && fail=1; \
	exit $$fail

check: check-texinfo
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: