GNU coreutils NEWS -*- outline -*- * Major changes in release 5.3.0 (2004-03-17) [unstable] ** Bug fixes rm no longer required read access to the current directory. For some types of errors (e.g., read-only file system, I/O error) when first encountering a directory, `rm -r' would mistakenly fail to remove files under that directory. ptx now diagnoses invalid values for its --width=N (-w) and --gap-size=N (-g) options. tee now exits when it gets a SIGPIPE signal, as POSIX requires. To get tee's old behavior, use the shell command "(trap '' PIPE; tee)". ls no longer segfaults on systems for which SIZE_MAX != (size_t) -1 ** New features For efficiency, `sort -m' no longer copies input to a temporary file merely because the input happens to come from a pipe. As a result, some relatively-contrived examples like `cat F | sort -m -o F - G' are no longer safe, as `sort' might start writing F before `cat' is done reading it. This problem cannot occur unless `-m' is used. pwd now works even when run from a working directory whose name is longer than PATH_MAX. cp -pu and mv -u (when copying) now don't bother to update the destination if the resulting time stamp would be no newer than the preexisting time stamp. This saves work in the common case when copying or moving multiple times to the same destination in a file system with a coarse time stamp resolution. dd has new conversions for the conv= option: nocreat do not create the output file excl fail if the output file already exists fdatasync physically write output file data before finishing fsync likewise, but also write metadata dd has new iflag= and oflag= options with the following flags: append append mode (makes sense for output file only) direct use direct I/O for data dsync use synchronized I/O for data sync likewise, but also for metadata nonblock use non-blocking I/O nofollow do not follow symlinks stty now provides support (iutf8) for setting UTF-8 input mode. With stat, a specified format is no longer automatically newline terminated. If you want a newline at the end of your output, append `\n' to the format string. 'df', 'du', and 'ls' now take the default block size from the BLOCKSIZE environment variable if the BLOCK_SIZE, DF_BLOCK_SIZE, DU_BLOCK_SIZE, and LS_BLOCK_SIZE environment variables are not set. Unlike the other variables, though, BLOCKSIZE does not affect values like 'ls -l' sizes that are normally displayed as bytes. This new behavior is for compatibility with BSD. du accepts a new option --files0-from=FILE, where FILE contains a list of NUL-terminated file names. `date -d' and `touch -d' now accept integer counts of seconds since 1970 when prefixed by `@'. For example, `@321' represents 1970-01-01 00:05:21 UTC. `date -d', `date -f' and `touch -d' now handle fractional time stamps like 2004-02-27 14:19:13.489392193. `date' has a new option --iso-8601=ns that outputs nanosecond-resolution time stamps. * Major changes in release 5.2.1 (2004-03-12) [stable] ** Bug fixes mv could mistakenly fail to preserve hard links when moving two or more arguments between partitions. `cp --sparse=always F /dev/hdx' no longer tries to use lseek to create holes in the destination. nohup now sets the close-on-exec flag for its copy of the stderr file descriptor. This avoids some nohup-induced hangs. For example, before this change, if you ran `ssh localhost', then `nohup sleep 600 /dev/null takes about one hour on a 1.6 GHz Athlon 2000 XP. Now it can output 2^53-1 numbers before misbehaving. * Major changes in release 5.1.2 (2004-01-25): ** Bug fixes rmdir -p exits with status 1 on error; formerly it sometimes exited with status 0 when given more than one argument. nohup now always exits with status 127 when it finds an error, as POSIX requires; formerly it sometimes exited with status 1. Several programs (including cut, date, dd, env, hostname, nl, pr, stty, and tr) now always exit with status 1 when they find an error; formerly they sometimes exited with status 2. factor no longer reports a usage error if stdin has the wrong format. paste no longer infloops on ppc systems (bug introduced in 5.1.1) * Major changes in release 5.1.1 (2004-01-17): ** Configuration option You can select the default level of POSIX conformance at configure-time, e.g., by ./configure DEFAULT_POSIX2_VERSION=199209 ** Bug fixes fold -s works once again on systems with differing sizes for int and size_t (bug introduced in 5.1.0) ** New features touch -r now specifies the origin for any relative times in the -d operand, if both options are given. For example, "touch -r FOO -d '-5 seconds' BAR" sets BAR's modification time to be five seconds before FOO's. join: The obsolete options "-j1 FIELD", "-j2 FIELD", and "-o LIST1 LIST2..." are no longer supported on POSIX 1003.1-2001 systems. Portable scripts should use "-1 FIELD", "-2 FIELD", and "-o LIST1,LIST2..." respectively. If join was compiled on a POSIX 1003.1-2001 system, you may enable the old behavior by setting _POSIX2_VERSION=199209 in your environment. * Major changes in release 5.1.0 (2003-12-21): ** New features chgrp, chmod, and chown can now process (with -R) hierarchies of virtually unlimited depth. Before, they would fail to operate on any file they encountered with a relative name of length PATH_MAX (often 4096) or longer. chgrp, chmod, chown, and rm accept the new options: --preserve-root, --no-preserve-root (default) chgrp and chown now accept POSIX-mandated -L, -H, and -P options du can now process hierarchies of virtually unlimited depth. Before, du was limited by the user's stack size and it would get a stack overflow error (often a segmentation fault) when applied to a hierarchy of depth around 30,000 or larger. du works even when run from an inaccessible directory du -D now dereferences all symlinks specified on the command line, not just the ones that reference directories du now accepts -P (--no-dereference), for compatibility with du of NetBSD and for consistency with e.g., chown and chgrp du's -H option will soon have the meaning required by POSIX (--dereference-args, aka -D) rather then the current meaning of --si. Now, using -H elicits a warning to that effect. When given -l and similar options, ls now adjusts the output column widths to fit the data, so that output lines are shorter and have columns that line up better. This may adversely affect shell scripts that expect fixed-width columns, but such shell scripts were not portable anyway, even with old GNU ls where the columns became ragged when a datum was too wide. du accepts a new option, -0/--null, to make it produce NUL-terminated output lines ** Bug fixes printf, seq, tail, and sleep now parse floating-point operands and options in the C locale. POSIX requires this for printf. od -c -w9999999 no longer segfaults csplit no longer reads from freed memory (dumping core on some systems) csplit would mistakenly exhaust virtual memory in some cases ls --width=N (for very large N) is no longer subject to an address arithmetic bug that could result in bounds violations. ls --width=N (with -x or -C) no longer allocates more space (potentially much more) than necessary for a given directory. dd `unblock' and `sync' may now be combined (e.g., dd conv=unblock,sync) * Major changes in release 5.0.91 (2003-09-08): ** New features date accepts a new option --rfc-2822, an alias for --rfc-822. split accepts a new option -d or --numeric-suffixes. cp, install, mv, and touch now preserve microsecond resolution on file timestamps, on platforms that have the 'utimes' system call. Unfortunately there is no system call yet to preserve file timestamps to their full nanosecond resolution; microsecond resolution is the best we can do right now. sort now supports the zero byte (NUL) as a field separator; use -t '\0'. The -t '' option, which formerly had no effect, is now an error. sort option order no longer matters for the options -S, -d, -i, -o, and -t. Stronger options override weaker, and incompatible options are diagnosed. `sha1sum --check' now accepts the BSD format for SHA1 message digests in addition to the BSD format for MD5 ones. who -l now means `who --login', not `who --lookup', per POSIX. who's -l option has been eliciting an unconditional warning about this impending change since sh-utils-2.0.12 (April 2002). ** Bug fixes Mistakenly renaming a file onto itself, e.g., via `mv B b' when `B' is the same directory entry as `b' no longer destroys the directory entry referenced by both `b' and `B'. Note that this would happen only on file systems like VFAT where two different names may refer to the same directory entry, usually due to lower->upper case mapping of file names. Now, the above can happen only on file systems that perform name mapping and that support hard links (stat.st_nlink > 1). This mitigates the problem in two ways: few file systems appear to be affected (hpfs and ntfs are), when the bug is triggered, mv no longer removes the last hard link to a file. *** ATTENTION ***: if you know how to distinguish the following two cases without writing to the file system in question, please let me know: 1) B and b refer to the same directory entry on a file system like NTFS (B may well have a link count larger than 1) 2) B and b are hard links to the same file stat no longer overruns a buffer for format strings ending in `%' fold -s -wN would infloop for N < 8 with TABs in the input. E.g., this would not terminate: printf 'a\t' | fold -w2 -s `split -a0', although of questionable utility, is accepted once again. `df DIR' used to hang under some conditions on OSF/1 5.1. Now it doesn't. seq's --width (-w) option now works properly even when the endpoint requiring the larger width is negative and smaller than the other endpoint. seq's default step is 1, even if LAST < FIRST. paste no longer mistakenly outputs 0xFF bytes for a nonempty input file without a trailing newline. `tail -n0 -f FILE' and `tail -c0 -f FILE' no longer perform what amounted to a busy wait, rather than sleeping between iterations. tail's long-undocumented --allow-missing option now elicits a warning * Major changes in release 5.0.90 (2003-07-29): ** New features sort is now up to 30% more CPU-efficient in some cases `test' is now more compatible with Bash and POSIX: `test -t', `test --help', and `test --version' now silently exit with status 0. To test whether standard output is a terminal, use `test -t 1'. To get help and version info for `test', use `[ --help' and `[ --version'. `test' now exits with status 2 (not 1) if there is an error. wc count field widths now are heuristically adjusted depending on the input size, if known. If only one count is printed, it is guaranteed to be printed without leading spaces. Previously, wc did not align the count fields if POSIXLY_CORRECT was set, but POSIX did not actually require this undesirable behavior, so it has been removed. ** Bug fixes kill no longer tries to operate on argv[0] (introduced in 5.0.1) Why wasn't this noticed? Although many tests use kill, none of them made an effort to avoid using the shell's built-in kill. `[' invoked with no arguments no longer evokes a segfault rm without --recursive (aka -r or -R) no longer prompts regarding unwritable directories, as required by POSIX. uniq -c now uses a SPACE, not a TAB between the count and the corresponding line, as required by POSIX. expr now exits with status 2 if the expression is syntactically valid, and with status 3 if an error occurred. POSIX requires this. expr now reports trouble if string comparison fails due to a collation error. split now generates suffixes properly on EBCDIC hosts. split -a0 now works, as POSIX requires. `sort --version' and `sort --help' fail, as they should when their output is redirected to /dev/full. `su --version > /dev/full' now fails, as it should. ** Fewer arbitrary limitations cut requires 97% less memory when very large field numbers or byte offsets are specified. * Major changes in release 5.0.1 (2003-07-15): ** New programs - new program: `[' (much like `test') ** New features - head now accepts --lines=-N (--bytes=-N) to print all but the N lines (bytes) at the end of the file - md5sum --check now accepts the output of the BSD md5sum program, e.g., MD5 (f) = d41d8cd98f00b204e9800998ecf8427e - date -d DATE can now parse a DATE string like May-23-2003 - chown: `.' is no longer recognized as a separator in the OWNER:GROUP specifier on POSIX 1003.1-2001 systems. If chown *was not* compiled on such a system, then it still accepts `.', by default. If chown was compiled on a POSIX 1003.1-2001 system, then you may enable the old behavior by setting _POSIX2_VERSION=199209 in your environment. - chown no longer tries to preserve set-user-ID and set-group-ID bits; on some systems, the chown syscall resets those bits, and previous versions of the chown command would call chmod to restore the original, pre-chown(2) settings, but that behavior is problematic. 1) There was a window whereby a malicious user, M, could subvert a chown command run by some other user and operating on files in a directory where M has write access. 2) Before (and even now, on systems with chown(2) that doesn't reset those bits), an unwary admin. could use chown unwittingly to create e.g., a set-user-ID root copy of /bin/sh. ** Bug fixes - chown --dereference no longer leaks a file descriptor per symlink processed - `du /' once again prints the `/' on the last line - split's --verbose option works once again [broken in 4.5.10 and 5.0] - tail -f is no longer subject to a race condition that could make it delay displaying the last part of a file that had stopped growing. That bug could also make tail -f give an unwarranted `file truncated' warning. - du no longer runs out of file descriptors unnecessarily - df and `readlink --canonicalize' no longer corrupt the heap on non-glibc, non-solaris systems - `env -u UNSET_VARIABLE' no longer dumps core on non-glibc systems - readlink's --canonicalize option now works on systems like Solaris that lack the canonicalize_file_name function but do have resolvepath. - mv now removes `a' in this example on all systems: touch a; ln a b; mv a b This behavior is contrary to POSIX (which requires that the mv command do nothing and exit successfully), but I suspect POSIX will change. - date's %r format directive now honors locale settings - date's `-' (no-pad) format flag now affects the space-padded-by-default conversion specifiers, %e, %k, %l - fmt now diagnoses invalid obsolescent width specifications like `-72x' - fmt now exits nonzero when unable to open an input file - tsort now fails when given an odd number of input tokens, as required by POSIX. Before, it would act as if the final token appeared one additional time. ** Fewer arbitrary limitations - tail's byte and line counts are no longer limited to OFF_T_MAX. Now the limit is UINTMAX_MAX (usually 2^64). - split can now handle --bytes=N and --lines=N with N=2^31 or more. ** Portability - `kill -t' now prints signal descriptions (rather than `?') on systems like Tru64 with __sys_siglist but no strsignal function. - stat.c now compiles on Ultrix systems - sleep now works on AIX systems that lack support for clock_gettime - rm now works around Darwin6.5's broken readdir function Before `rm -rf DIR' would fail to remove all files in DIR if there were more than 338. * Major changes in release 5.0 (2003-04-02): - false --help now exits nonzero [4.5.12] * printf no longer treats \x specially when POSIXLY_CORRECT is set * printf avoids buffer overrun with format ending in a backslash and * printf avoids buffer overrun with incomplete conversion specifier * printf accepts multiple flags in a single conversion specifier [4.5.11] * seq no longer requires that a field width be specified * seq no longer fails when given a field width of `0' * seq now accepts ` ' and `'' as valid format flag characters * df now shows a HOSTNAME: prefix for each remote-mounted file system on AIX 5.1 * portability tweaks for HP-UX, AIX 5.1, DJGPP [4.5.10] * printf no longer segfaults for a negative field width or precision * shred now always enables --exact for non-regular files * du no longer lists hard-linked files more than once * du no longer dumps core on some systems due to `infinite' recursion via nftw's use of the buggy replacement function in getcwd.c * portability patches for a few vendor compilers and 64-bit systems * du -S *really* now works like it did before the change in 4.5.5 [4.5.9] * du no longer truncates file sizes or sums to fit in 32-bit size_t * work around Linux kernel bug in getcwd (fixed in 2.4.21-pre4), so that pwd now fails if the name of the working directory is so long that getcwd truncates it. Before it would print the truncated name and exit successfully. * `df /some/mount-point' no longer hangs on a GNU libc system when another hard-mounted NFS file system (preceding /some/mount-point in /proc/mounts) is inaccessible. * rm -rf now gives an accurate diagnostic when failing to remove a file under certain unusual conditions * mv and `cp --preserve=links' now preserve multiple hard links even under certain unusual conditions where they used to fail [4.5.8] * du -S once again works like it did before the change in 4.5.5 * stat accepts a new file format, %B, for the size of each block reported by %b * du accepts new option: --apparent-size * du --bytes (-b) works the same way it did in fileutils-3.16 and before * du reports proper sizes for directories (not zero) (broken in 4.5.6 or 4.5.7) * df now always displays under `Filesystem', the device file name corresponding to the listed mount point. Before, for a block- or character- special file command line argument, df would display that argument. E.g., `df /dev/hda' would list `/dev/hda' as the `Filesystem', rather than say /dev/hda3 (the device on which `/' is mounted), as it does now. * test now works properly when invoked from a set user ID or set group ID context and when testing access to files subject to alternate protection mechanisms. For example, without this change, a set-UID program that invoked `test -w F' (to see if F is writable) could mistakenly report that it *was* writable, even though F was on a read-only file system, or F had an ACL prohibiting write access, or F was marked as immutable. [4.5.7] * du would fail with more than one DIR argument when any but the last did not contain a slash (due to a bug in ftw.c) [4.5.6] * du no longer segfaults on Solaris systems (fixed heap-corrupting bug in ftw.c) * du --exclude=FILE works once again (this was broken by the rewrite for 4.5.5) * du no longer gets a failed assertion for certain hierarchy lay-outs involving hard-linked directories * `who -r' no longer segfaults when using non-C-locale messages * df now displays a mount point (usually `/') for non-mounted character-special and block files [4.5.5] * ls --dired produces correct byte offset for file names containing nonprintable characters in a multibyte locale * du has been rewritten to use a variant of GNU libc's ftw.c * du now counts the space associated with a directory's directory entry, even if it cannot list or chdir into that subdirectory. * du -S now includes the st_size of each entry corresponding to a subdirectory * rm on FreeBSD can once again remove directories from NFS-mounted file systems * ls has a new option --dereference-command-line-symlink-to-dir, which corresponds to the new default behavior when none of -d, -l -F, -H, -L has been specified. * ls dangling-symlink now prints `dangling-symlink'. Before, it would fail with `no such file or directory'. * ls -s symlink-to-non-dir and ls -i symlink-to-non-dir now print attributes of `symlink', rather than attributes of their referents. * Fix a bug introduced in 4.5.4 that made it so that ls --color would no longer highlight the names of files with the execute bit set when not specified on the command line. * shred's --zero (-z) option no longer gobbles up any following argument. Before, `shred --zero file' would produce `shred: missing file argument', and worse, `shred --zero f1 f2 ...' would appear to work, but would leave the first file untouched. * readlink: new program * cut: new feature: when used to select ranges of byte offsets (as opposed to ranges of fields) and when --output-delimiter=STRING is specified, output STRING between ranges of selected bytes. * rm -r can no longer be tricked into mistakenly reporting a cycle. * when rm detects a directory cycle, it no longer aborts the entire command, but rather merely stops processing the affected command line argument. [4.5.4] * cp no longer fails to parse options like this: --preserve=mode,ownership * `ls --color -F symlink-to-dir' works properly * ls is much more efficient on directories with valid dirent.d_type. * stty supports all baud rates defined in linux-2.4.19. * `du symlink-to-dir/' would improperly remove the trailing slash * `du ""' would evoke a bounds violation. * In the unlikely event that running `du /' resulted in `stat ("/", ...)' failing, du would give a diagnostic about `' (empty string) rather than `/'. * printf: a hexadecimal escape sequence has at most two hex. digits, not three. * The following features have been added to the --block-size option and similar environment variables of df, du, and ls. - A leading "'" generates numbers with thousands separators. For example: $ ls -l --block-size="'1" file -rw-rw-r-- 1 eggert src 47,483,707 Sep 24 23:40 file - A size suffix without a leading integer generates a suffix in the output. For example: $ ls -l --block-size="K" -rw-rw-r-- 1 eggert src 46371K Sep 24 23:40 file * ls's --block-size option now affects file sizes in all cases, not just for --block-size=human-readable and --block-size=si. Fractional sizes are now always rounded up, for consistency with df and du. * df now displays the block size using powers of 1000 if the requested block size seems to be a multiple of a power of 1000. * nl no longer gets a segfault when run like this `yes|nl -s%n' [4.5.3] * du --dereference-args (-D) no longer fails in certain cases * `ln --target-dir=DIR' no longer fails when given a single argument [4.5.2] * `rm -i dir' (without --recursive (-r)) no longer recurses into dir * `tail -c N FILE' now works with files of size >= 4GB * `mkdir -p' can now create very deep (e.g. 40,000-component) directories * rmdir -p dir-with-trailing-slash/ no longer fails * printf now honors the `--' command line delimiter * od's 8-byte formats x8, o8, and u8 now work * tail now accepts fractional seconds for its --sleep-interval=S (-s) option [4.5.1] * du and ls now report sizes of symbolic links (before they'd always report 0) * uniq now obeys the LC_COLLATE locale, as per POSIX 1003.1-2001 TC1. ======================================================================== Here are the NEWS entries made from fileutils-4.1 until the point at which the packages merged to form the coreutils: [4.1.11] * `rm symlink-to-unwritable' doesn't prompt [introduced in 4.1.10] [4.1.10] * rm once again gives a reasonable diagnostic when failing to remove a file owned by someone else in a sticky directory [introduced in 4.1.9] * df now rounds all quantities up, as per POSIX. * New ls time style: long-iso, which generates YYYY-MM-DD HH:MM. * Any time style can be preceded by "posix-"; this causes "ls" to use traditional timestamp format when in the POSIX locale. * The default time style is now posix-long-iso instead of posix-iso. Set TIME_STYLE="posix-iso" to revert to the behavior of 4.1.1 thru 4.1.9. * `rm dangling-symlink' doesn't prompt [introduced in 4.1.9] * stat: remove support for --secure/-s option and related %S and %C format specs * stat: rename --link/-l to --dereference/-L. The old options will continue to work for a while. [4.1.9] * rm can now remove very deep hierarchies, in spite of any limit on stack size * new programs: link, unlink, and stat * New ls option: --author (for the Hurd). * `touch -c no-such-file' no longer fails, per POSIX [4.1.8] * mv no longer mistakenly creates links to preexisting destination files that aren't moved [4.1.7] * rm: close a hole that would allow a running rm process to be subverted [4.1.6] * New cp option: --copy-contents. * cp -r is now equivalent to cp -R. Use cp -R -L --copy-contents to get the traditional (and rarely desirable) cp -r behavior. * ls now accepts --time-style=+FORMAT, where +FORMAT works like date's format * The obsolete usage `touch [-acm] MMDDhhmm[YY] FILE...' is no longer supported on systems conforming to POSIX 1003.1-2001. Use touch -t instead. * cp and inter-partition mv no longer give a misleading diagnostic in some unusual cases [4.1.5] * cp -r no longer preserves symlinks * The block size notation is now compatible with SI and with IEC 60027-2. For example, --block-size=1MB now means --block-size=1000000, whereas --block-size=1MiB now means --block-size=1048576. A missing `B' (e.g. `1M') has the same meaning as before. A trailing `B' now means decimal, not binary; this is a silent change. The nonstandard `D' suffix (e.g. `1MD') is now obsolescent. * -H or --si now outputs the trailing 'B', for consistency with the above. * Programs now output trailing 'K' (not 'k') to mean 1024, as per IEC 60027-2. * New df, du short option -B is short for --block-size. * You can omit an integer `1' before a block size suffix, e.g. `df -BG' is equivalent to `df -B 1G' and to `df --block-size=1G'. * The following options are now obsolescent, as their names are incompatible with IEC 60027-2: df, du: -m or --megabytes (use -BM or --block-size=1M) df, du, ls: --kilobytes (use --block-size=1K) [4.1.4] * df --local no longer lists smbfs file systems whose name starts with // * dd now detects the Linux/tape/lseek bug at run time and warns about it. [4.1.3] * ls -R once again outputs a blank line between per-directory groups of files. This was broken by the cycle-detection change in 4.1.1. * dd once again uses `lseek' on character devices like /dev/mem and /dev/kmem. On systems with the linux kernel (at least up to 2.4.16), dd must still resort to emulating `skip=N' behavior using reads on tape devices, because lseek has no effect, yet appears to succeed. This may be a kernel bug. [4.1.2] * cp no longer fails when two or more source files are the same; now it just gives a warning and doesn't copy the file the second time. E.g., cp a a d/ produces this: cp: warning: source file `a' specified more than once * chmod would set the wrong bit when given symbolic mode strings like these: g=o, o=g, o=u. E.g., `chmod a=,o=w,ug=o f' would give a mode of --w-r---w- rather than --w--w--w-. [4.1.1] * mv (likewise for cp), now fails rather than silently clobbering one of the source files in the following example: rm -rf a b c; mkdir a b c; touch a/f b/f; mv a/f b/f c * ls -R detects directory cycles, per POSIX. It warns and doesn't infloop. * cp's -P option now means the same as --no-dereference, per POSIX. Use --parents to get the old meaning. * When copying with the -H and -L options, cp can preserve logical links between source files with --preserve=links * cp accepts new options: --preserve[={mode,ownership,timestamps,links,all}] --no-preserve={mode,ownership,timestamps,links,all} * cp's -p and --preserve options remain unchanged and are equivalent to `--preserve=mode,ownership,timestamps' * mv and cp accept a new option: --reply={yes,no,query}; provides a consistent mechanism to control whether one is prompted about certain existing destination files. Note that cp's and mv's -f options don't have the same meaning: cp's -f option no longer merely turns off `-i'. * remove portability limitations (e.g., PATH_MAX on the Hurd, fixes for 64-bit systems) * mv now prompts before overwriting an existing, unwritable destination file when stdin is a tty, unless --force (-f) is specified, as per POSIX. * mv: fix the bug whereby `mv -uf source dest' would delete source, even though it's older than dest. * chown's --from=CURRENT_OWNER:CURRENT_GROUP option now works * cp now ensures that the set-user-ID and set-group-ID bits are cleared for the destination file when when copying and not preserving permissions. * `ln -f --backup k k' gives a clearer diagnostic * ls no longer truncates user names or group names that are longer than 8 characters. * ls's new --dereference-command-line option causes it to dereference symbolic links on the command-line only. It is the default unless one of the -d, -F, or -l options are given. * ls -H now means the same as ls --dereference-command-line, as per POSIX. * ls -g now acts like ls -l, except it does not display owner, as per POSIX. * ls -n now implies -l, as per POSIX. * ls can now display dates and times in one of four time styles: - The `full-iso' time style gives full ISO-style time stamps like `2001-05-14 23:45:56.477817180 -0700'. - The 'iso' time style gives ISO-style time stamps like '2001-05-14 ' and '05-14 23:45'. - The 'locale' time style gives locale-dependent time stamps like 'touko 14 2001' and 'touko 14 23:45' (in a Finnish locale). - The 'posix-iso' time style gives traditional POSIX-locale time stamps like 'May 14 2001' and 'May 14 23:45' unless the user specifies a non-POSIX locale, in which case it uses ISO-style dates. This is the default. You can specify a time style with an option like --time-style='iso' or with an environment variable like TIME_STYLE='iso'. GNU Emacs 21 and later can parse ISO dates, but older Emacs versions cannot, so if you are using an older version of Emacs outside the default POSIX locale, you may need to set TIME_STYLE="locale". * --full-time is now an alias for "-l --time-style=full-iso". ======================================================================== Here are the NEWS entries made from sh-utils-2.0 until the point at which the packages merged to form the coreutils: [2.0.15] * date no longer accepts e.g., September 31 in the MMDDhhmm syntax * fix a bug in this package's .m4 files and in configure.ac [2.0.14] * nohup's behavior is changed as follows, to conform to POSIX 1003.1-2001: - nohup no longer adjusts scheduling priority; use "nice" for that. - nohup now redirects stderr to stdout, if stderr is not a terminal. - nohup exit status is now 126 if command was found but not invoked, 127 if nohup failed or if command was not found. [2.0.13] * uname and uptime work better on *BSD systems * pathchk now exits nonzero for a path with a directory component that specifies a non-directory [2.0.12] * kill: new program * who accepts new options: --all (-a), --boot (-b), --dead (-d), --login, --process (-p), --runlevel (-r), --short (-s), --time (-t), --users (-u). The -u option now produces POSIX-specified results and is the same as the long option `--users'. --idle is no longer the same as -u. * The following changes apply on systems conforming to POSIX 1003.1-2001, and are required by the new POSIX standard: - `date -I' is no longer supported. Instead, use `date --iso-8601'. - `nice -NUM' is no longer supported. Instead, use `nice -n NUM'. * New 'uname' options -i or --hardware-platform, and -o or --operating-system. 'uname -a' now outputs -i and -o information at the end. New uname option --kernel-version is an alias for -v. Uname option --release has been renamed to --kernel-release, and --sysname has been renamed to --kernel-name; the old options will work for a while, but are no longer documented. * 'expr' now uses the LC_COLLATE locale for string comparison, as per POSIX. * 'expr' now requires '+' rather than 'quote' to quote tokens; this removes an incompatibility with POSIX. * date -d 'last friday' would print a date/time that was one hour off (e.g., 23:00 on *thursday* rather than 00:00 of the preceding friday) when run such that the current time and the target date/time fall on opposite sides of a daylight savings time transition. This problem arose only with relative date strings like `last monday'. It was not a problem with strings that include absolute dates. * factor is twice as fast, for large numbers [2.0.11] * setting the date now works properly, even when using -u * `date -f - < /dev/null' no longer dumps core * some DOS/Windows portability changes [2.0j] * `date -d DATE' now parses certain relative DATEs correctly [2.0i] * fixed a bug introduced in 2.0h that made many programs fail with a `write error' when invoked with the --version option [2.0h] * all programs fail when printing --help or --version output to a full device * printf exits nonzero upon write failure * yes now detects and terminates upon write failure * date --rfc-822 now always emits day and month names from the `C' locale * portability tweaks for Solaris8, Ultrix, and DOS [2.0g] * date now handles two-digit years with leading zeros correctly. * printf interprets unicode, \uNNNN \UNNNNNNNN, on systems with the required support; from Bruno Haible. * stty's rprnt attribute now works on HPUX 10.20 * seq's --equal-width option works more portably [2.0f] * fix build problems with ut_name vs. ut_user [2.0e] * stty: fix long-standing bug that caused test failures on at least HPUX systems when COLUMNS was set to zero * still more portability fixes * unified lib/: now that directory and most of the configuration framework is common between fileutils, textutils, and sh-utils [2.0d] * fix portability problem with sleep vs lib/strtod.c's requirement for -lm [2.0c] * fix portability problems with nanosleep.c and with the new code in sleep.c [2.0b] * Regenerate lib/Makefile.in so that nanosleep.c is distributed. [2.0a] * sleep accepts floating point arguments on command line * sleep's clock continues counting down when sleep is suspended * when a suspended sleep process is resumed, it continues sleeping if there is any time remaining * who once again prints whatever host information it has, even without --lookup ======================================================================== For older NEWS entries for the fileutils, textutils, and sh-utils packages, see ./old/*/NEWS. This package began as the union of the following: textutils-2.1, fileutils-4.1.11, sh-utils-2.0.15.