# Makefile.in generated by automake 1.9.5 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/config.hin \
	$(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \
	INSTALL NEWS THANKS TODO config/ChangeLog config/config.guess \
	config/config.rpath config/config.sub config/depcomp \
	config/install-sh config/mdate-sh config/missing \
	config/mkinstalldirs config/texinfo.tex
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acl.m4 $(top_srcdir)/m4/afs.m4 \
	$(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/allocsa.m4 \
	$(top_srcdir)/m4/argmatch.m4 $(top_srcdir)/m4/assert.m4 \
	$(top_srcdir)/m4/atexit.m4 $(top_srcdir)/m4/backupfile.m4 \
	$(top_srcdir)/m4/basename.m4 $(top_srcdir)/m4/bison.m4 \
	$(top_srcdir)/m4/boottime.m4 $(top_srcdir)/m4/c-strtod.m4 \
	$(top_srcdir)/m4/calloc.m4 $(top_srcdir)/m4/canon-host.m4 \
	$(top_srcdir)/m4/canonicalize.m4 \
	$(top_srcdir)/m4/chdir-long.m4 $(top_srcdir)/m4/check-decl.m4 \
	$(top_srcdir)/m4/chown.m4 $(top_srcdir)/m4/clock_time.m4 \
	$(top_srcdir)/m4/cloexec.m4 $(top_srcdir)/m4/closeout.m4 \
	$(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/cycle-check.m4 \
	$(top_srcdir)/m4/d-ino.m4 $(top_srcdir)/m4/d-type.m4 \
	$(top_srcdir)/m4/dirfd.m4 $(top_srcdir)/m4/dirname.m4 \
	$(top_srcdir)/m4/dos.m4 $(top_srcdir)/m4/dup2.m4 \
	$(top_srcdir)/m4/eealloc.m4 $(top_srcdir)/m4/eoverflow.m4 \
	$(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/euidaccess.m4 \
	$(top_srcdir)/m4/exclude.m4 $(top_srcdir)/m4/exitfail.m4 \
	$(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-safer.m4 \
	$(top_srcdir)/m4/file-type.m4 $(top_srcdir)/m4/fileblocks.m4 \
	$(top_srcdir)/m4/filemode.m4 $(top_srcdir)/m4/fnmatch.m4 \
	$(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/free.m4 \
	$(top_srcdir)/m4/fstypename.m4 $(top_srcdir)/m4/fsusage.m4 \
	$(top_srcdir)/m4/ftruncate.m4 $(top_srcdir)/m4/fts.m4 \
	$(top_srcdir)/m4/getcwd-path-max.m4 $(top_srcdir)/m4/getcwd.m4 \
	$(top_srcdir)/m4/getdate.m4 $(top_srcdir)/m4/getgroups.m4 \
	$(top_srcdir)/m4/gethostname.m4 $(top_srcdir)/m4/gethrxtime.m4 \
	$(top_srcdir)/m4/getline.m4 $(top_srcdir)/m4/getndelim2.m4 \
	$(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/getpagesize.m4 \
	$(top_srcdir)/m4/getpass.m4 $(top_srcdir)/m4/gettext.m4 \
	$(top_srcdir)/m4/gettime.m4 $(top_srcdir)/m4/gettimeofday.m4 \
	$(top_srcdir)/m4/getugroups.m4 \
	$(top_srcdir)/m4/getusershell.m4 $(top_srcdir)/m4/glibc21.m4 \
	$(top_srcdir)/m4/group-member.m4 \
	$(top_srcdir)/m4/hard-locale.m4 $(top_srcdir)/m4/hash-pjw.m4 \
	$(top_srcdir)/m4/hash.m4 $(top_srcdir)/m4/host-os.m4 \
	$(top_srcdir)/m4/human.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/idcache.m4 $(top_srcdir)/m4/intmax_t.m4 \
	$(top_srcdir)/m4/inttostr.m4 $(top_srcdir)/m4/inttypes-pri.m4 \
	$(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/inttypes_h.m4 \
	$(top_srcdir)/m4/jm-macros.m4 $(top_srcdir)/m4/jm-winsz1.m4 \
	$(top_srcdir)/m4/jm-winsz2.m4 $(top_srcdir)/m4/lchown.m4 \
	$(top_srcdir)/m4/lib-check.m4 $(top_srcdir)/m4/lib-ld.m4 \
	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
	$(top_srcdir)/m4/linebuffer.m4 $(top_srcdir)/m4/link-follow.m4 \
	$(top_srcdir)/m4/long-options.m4 \
	$(top_srcdir)/m4/longdouble.m4 $(top_srcdir)/m4/longlong.m4 \
	$(top_srcdir)/m4/ls-mntd-fs.m4 $(top_srcdir)/m4/lstat.m4 \
	$(top_srcdir)/m4/makepath.m4 $(top_srcdir)/m4/mbrtowc.m4 \
	$(top_srcdir)/m4/mbstate_t.m4 $(top_srcdir)/m4/mbswidth.m4 \
	$(top_srcdir)/m4/md5.m4 $(top_srcdir)/m4/memcasecmp.m4 \
	$(top_srcdir)/m4/memchr.m4 $(top_srcdir)/m4/memcmp.m4 \
	$(top_srcdir)/m4/memcoll.m4 $(top_srcdir)/m4/memcpy.m4 \
	$(top_srcdir)/m4/memmove.m4 $(top_srcdir)/m4/mempcpy.m4 \
	$(top_srcdir)/m4/memrchr.m4 $(top_srcdir)/m4/memset.m4 \
	$(top_srcdir)/m4/mkdir-slash.m4 $(top_srcdir)/m4/mkstemp.m4 \
	$(top_srcdir)/m4/mktime.m4 $(top_srcdir)/m4/modechange.m4 \
	$(top_srcdir)/m4/mountlist.m4 $(top_srcdir)/m4/nanosleep.m4 \
	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/obstack.m4 \
	$(top_srcdir)/m4/onceonly_2_57.m4 $(top_srcdir)/m4/openat.m4 \
	$(top_srcdir)/m4/path-concat.m4 $(top_srcdir)/m4/pathmax.m4 \
	$(top_srcdir)/m4/perl.m4 $(top_srcdir)/m4/physmem.m4 \
	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/posixtm.m4 \
	$(top_srcdir)/m4/posixver.m4 $(top_srcdir)/m4/prereq.m4 \
	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/putenv.m4 \
	$(top_srcdir)/m4/quote.m4 $(top_srcdir)/m4/quotearg.m4 \
	$(top_srcdir)/m4/readdir.m4 $(top_srcdir)/m4/readlink.m4 \
	$(top_srcdir)/m4/readtokens.m4 $(top_srcdir)/m4/readutmp.m4 \
	$(top_srcdir)/m4/regex.m4 $(top_srcdir)/m4/rename.m4 \
	$(top_srcdir)/m4/restrict.m4 $(top_srcdir)/m4/rmdir-errno.m4 \
	$(top_srcdir)/m4/rmdir.m4 $(top_srcdir)/m4/rpmatch.m4 \
	$(top_srcdir)/m4/safe-read.m4 $(top_srcdir)/m4/safe-write.m4 \
	$(top_srcdir)/m4/same.m4 $(top_srcdir)/m4/save-cwd.m4 \
	$(top_srcdir)/m4/savedir.m4 $(top_srcdir)/m4/setenv.m4 \
	$(top_srcdir)/m4/settime.m4 $(top_srcdir)/m4/sha1.m4 \
	$(top_srcdir)/m4/sig2str.m4 $(top_srcdir)/m4/signed.m4 \
	$(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/st_dm_mode.m4 \
	$(top_srcdir)/m4/st_mtim.m4 $(top_srcdir)/m4/stat-prog.m4 \
	$(top_srcdir)/m4/stat.m4 $(top_srcdir)/m4/stdbool.m4 \
	$(top_srcdir)/m4/stdint_h.m4 $(top_srcdir)/m4/stdio-safer.m4 \
	$(top_srcdir)/m4/stpcpy.m4 $(top_srcdir)/m4/strcase.m4 \
	$(top_srcdir)/m4/strcspn.m4 $(top_srcdir)/m4/strdup.m4 \
	$(top_srcdir)/m4/strftime.m4 $(top_srcdir)/m4/stripslash.m4 \
	$(top_srcdir)/m4/strndup.m4 $(top_srcdir)/m4/strnlen.m4 \
	$(top_srcdir)/m4/strpbrk.m4 $(top_srcdir)/m4/strstr.m4 \
	$(top_srcdir)/m4/strtod.m4 $(top_srcdir)/m4/strtoimax.m4 \
	$(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/strtoll.m4 \
	$(top_srcdir)/m4/strtoul.m4 $(top_srcdir)/m4/strtoull.m4 \
	$(top_srcdir)/m4/strtoumax.m4 $(top_srcdir)/m4/strverscmp.m4 \
	$(top_srcdir)/m4/timespec.m4 $(top_srcdir)/m4/tm_gmtoff.m4 \
	$(top_srcdir)/m4/typeof.m4 $(top_srcdir)/m4/tzset.m4 \
	$(top_srcdir)/m4/uint32_t.m4 $(top_srcdir)/m4/uintmax_t.m4 \
	$(top_srcdir)/m4/uintptr_t.m4 $(top_srcdir)/m4/ullong_max.m4 \
	$(top_srcdir)/m4/ulonglong.m4 $(top_srcdir)/m4/unicodeio.m4 \
	$(top_srcdir)/m4/unistd-safer.m4 \
	$(top_srcdir)/m4/unlink-busy.m4 \
	$(top_srcdir)/m4/unlocked-io.m4 $(top_srcdir)/m4/uptime.m4 \
	$(top_srcdir)/m4/userspec.m4 $(top_srcdir)/m4/utimbuf.m4 \
	$(top_srcdir)/m4/utime.m4 $(top_srcdir)/m4/utimecmp.m4 \
	$(top_srcdir)/m4/utimens.m4 $(top_srcdir)/m4/utimes-null.m4 \
	$(top_srcdir)/m4/utimes.m4 $(top_srcdir)/m4/vasnprintf.m4 \
	$(top_srcdir)/m4/vasprintf.m4 $(top_srcdir)/m4/wchar_t.m4 \
	$(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \
	$(top_srcdir)/m4/xgetcwd.m4 $(top_srcdir)/m4/xnanosleep.m4 \
	$(top_srcdir)/m4/xreadlink.m4 $(top_srcdir)/m4/xstrtod.m4 \
	$(top_srcdir)/m4/xstrtoimax.m4 $(top_srcdir)/m4/xstrtol.m4 \
	$(top_srcdir)/m4/xstrtoumax.m4 $(top_srcdir)/m4/yesno.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
ALLOCA_H = @ALLOCA_H@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFAULT_POSIX2_VERSION = @DEFAULT_POSIX2_VERSION@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DF_PROG = @DF_PROG@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EOVERFLOW = @EOVERFLOW@
EXEEXT = @EXEEXT@
FESETROUND_LIBM = @FESETROUND_LIBM@
FNMATCH_H = @FNMATCH_H@
GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
GETOPT_H = @GETOPT_H@
GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
GNU_PACKAGE = @GNU_PACKAGE@
HAVE__BOOL = @HAVE__BOOL@
HELP2MAN = @HELP2MAN@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
KMEM_GROUP = @KMEM_GROUP@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIB_CLOCK_GETTIME = @LIB_CLOCK_GETTIME@
LIB_CRYPT = @LIB_CRYPT@
LIB_EACCESS = @LIB_EACCESS@
LIB_FDATASYNC = @LIB_FDATASYNC@
LIB_GETHRXTIME = @LIB_GETHRXTIME@
LIB_NANOSLEEP = @LIB_NANOSLEEP@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAN = @MAN@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NEED_SETGID = @NEED_SETGID@
OBJEXT = @OBJEXT@
OPTIONAL_BIN_PROGS = @OPTIONAL_BIN_PROGS@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
POSUB = @POSUB@
POW_LIB = @POW_LIB@
RANLIB = @RANLIB@
SEQ_LIBM = @SEQ_LIBM@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SQRT_LIBM = @SQRT_LIBM@
STDBOOL_H = @STDBOOL_H@
STRIP = @STRIP@
U = @U@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
YACC = @YACC@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
SUBDIRS = lib src doc man po tests
EXTRA_DIST = Makefile.cfg Makefile.maint GNUmakefile \
  .kludge-stamp .prev-version THANKS-to-translators THANKStt.in \
  .x-sc_space_tab .x-sc_sun_os_names \
  .x-sc_file_system \
  announce-gen \
  m4/ChangeLog \
  old/fileutils/ChangeLog \
  old/fileutils/ChangeLog-1997 \
  old/sh-utils/ChangeLog \
  old/sh-utils/ChangeLog.0 \
  old/textutils/ChangeLog \
  old/fileutils/NEWS \
  old/sh-utils/NEWS \
  old/textutils/NEWS

ACLOCAL_AMFLAGS = -I m4

# Just prior to distribution, ...
# transform the automake-generated rule that runs `rm -f rm'.
# On some systems, that command would fail with a diagnostic like
# `rm: cannot unlink `rm': Text file busy' when `.' appears so early
# in the shell's search path that running `rm' would run the `rm'
# executable in the current directory.
# Similarly, adjust the clean-binPROGRAMS rule.
rm_subst = \
  s!(rm -f (rm|\$$\(bin_PROGRAMS\)))$$!$$1 > /dev/null 2>&1 || /bin/$$1!

all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh:
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnits '; \
	      cd $(srcdir) && $(AUTOMAKE) --gnits  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnits  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/config.hin $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.hin:  $(am__configure_deps) 
	cd $(top_srcdir) && $(AUTOHEADER)
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.hin $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS) config.hin $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@case `sed 15q $(srcdir)/NEWS` in \
	*"$(VERSION)"*) : ;; \
	*) \
	  echo "NEWS not updated; not releasing" 1>&2; \
	  exit 1;; \
	esac
	$(am__remove_distdir)
	mkdir $(distdir)
	$(mkdir_p) $(distdir)/config $(distdir)/m4 $(distdir)/old/fileutils $(distdir)/old/sh-utils $(distdir)/old/textutils $(distdir)/po
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
	check-am clean clean-generic clean-recursive ctags \
	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
	dist-shar dist-tarZ dist-zip distcheck distclean \
	distclean-generic distclean-hdr distclean-recursive \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-exec install-exec-am \
	install-info install-info-am install-man install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-info-am


install-root:
	cd src && $(MAKE) $@

# Some tests always need root privileges, others need them only sometimes.
check-root:
	cd tests && $(MAKE) $@

dist-hook:
	test -x $(srcdir)/config/install-sh

distcheck-hook:
	$(MAKE) my-distcheck
.kludge-stamp: $(srcdir)/src/Makefile.in
	perl -pi -e '$(rm_subst)' $(srcdir)/src/Makefile.in
	touch $@

THANKS-to-translators: po/LINGUAS THANKStt.in
	(								\
	  cat $(srcdir)/THANKStt.in;					\
	  for lang in `cat po/LINGUAS`; do				\
	    echo http://www.iro.umontreal.ca/contrib/po/HTML/team-$$lang.html; \
	  done;								\
	) > $@-tmp && mv $@-tmp $@
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: