From d8ab1cdcfbac14a1bbe743917b760433779f4dbc Mon Sep 17 00:00:00 2001 From: Jim Meyering Date: Sat, 25 Jan 2003 08:00:05 +0000 Subject: . --- config/texinfo.tex | 225 ++++++++++++++++++++++++++--------------------------- 1 file changed, 112 insertions(+), 113 deletions(-) (limited to 'config') diff --git a/config/texinfo.tex b/config/texinfo.tex index 834c9492f..70fad2fa7 100644 --- a/config/texinfo.tex +++ b/config/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2003-01-23.10} +\def\texinfoversion{2003-01-24.17} % % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. @@ -1365,7 +1365,25 @@ where each line of input produces a line of output.} \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy \let\tenttsl=\smallerttsl \resetmathfonts \setleading{9.5pt}} -\let\smallexamplefonts = \smallerfonts + +% Set the fonts to use with the @small... environments. +\let\smallexamplefonts = \smallfonts + +% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample +% can fit this many characters: +% 8.5x11=86 smallbook=72 a4=90 a5=69 +% If we use \smallerfonts (8pt), then we can fit this many characters: +% 8.5x11=90+ smallbook=80 a4=90+ a5=77 +% For me, subjectively, the few extra characters that fit aren't worth +% the additional smallness of 8pt. So I'm making the default 9pt. +% +% By the way, for comparison, here's what fits with @example (10pt): +% 8.5x11=71 smallbook=60 a4=75 a5=58 +% +% I wish we used A4 paper on this side of the Atlantic. +% +% --karl, 24jan03. + % Set up the default fonts, so we can use them for creating boxes. % @@ -3110,13 +3128,6 @@ width0pt\relax} \fi \let\w=\asis } -% To define \realbackslash, we must make \ not be an escape. -% We must first make another character (@) an escape -% so we do not become unable to do a definition. - -{\catcode`\@=0 \catcode`\\=\other - @gdef@realbackslash{\}} - \let\indexbackslash=0 %overridden during \printindex. \let\SETmarginindex=\relax % put index entries in margin (undocumented)? @@ -4514,27 +4525,16 @@ width0pt\relax} \fi % @example: Same as @lisp. \def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp} -% @small... is usually equivalent to the non-small (@smallbook -% redefines). We must call \example (or whatever) last in the -% definition, since it reads the return following the @example (or -% whatever) command. -% -% This actually allows (for example) @end display inside an -% @smalldisplay. Too bad, but makeinfo will catch the error anyway. -% -\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display} -\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp} -\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format} -\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp} - -% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts. +% @smallexample and @smalllisp: use smaller fonts. % Originally contributed by Pavel@xerox. -\def\smalllispx{\begingroup +\def\smalllisp{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}% \def\Esmallexample{\nonfillfinish\endgroup}% \smallexamplefonts \lisp } +\let\smallexample = \smalllisp + % @display: same as @lisp except keep current font. % @@ -4544,9 +4544,9 @@ width0pt\relax} \fi \gobble } % -% @smalldisplay (when @smallbook): @display plus smaller fonts. +% @smalldisplay: @display plus smaller fonts. % -\def\smalldisplayx{\begingroup +\def\smalldisplay{\begingroup \def\Esmalldisplay{\nonfillfinish\endgroup}% \smallexamplefonts \rm \display @@ -4561,9 +4561,9 @@ width0pt\relax} \fi \gobble } % -% @smallformat (when @smallbook): @format plus smaller fonts. +% @smallformat: @format plus smaller fonts. % -\def\smallformatx{\begingroup +\def\smallformat{\begingroup \def\Esmallformat{\nonfillfinish\endgroup}% \smallexamplefonts \rm \format @@ -5747,11 +5747,13 @@ width0pt\relax} \fi \gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} \gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} -% \setref{NAME}{SNT} defines a cross-reference point NAME, namely -% NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have -% to set \indexdummies so commands such as @code in a section title -% aren't expanded. It would be nicer not to expand the titles in the -% first place, but there's so many layers that that is hard to do. +% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an +% anchor), namely NAME-title (the corresponding @chapter name), NAME-pg +% (the page number), and NAME-snt (section number). Called from +% \foonoderef. We have to set \indexdummies so commands such as @code +% in a section title aren't expanded. It would be nicer not to expand +% the titles in the first place, but there's so many layers that that is +% hard to do. % \def\setref#1#2{{% \indexdummies @@ -5807,7 +5809,7 @@ width0pt\relax} \fi \ifpdf \leavevmode \getfilename{#4}% - {\normalturnoffactive + {\turnoffactive \otherbackslash \ifnum\filenamelength>0 \startlink attr{/Border [0 0 0]}% goto file{\the\filename.pdf} name{#1}% @@ -5827,7 +5829,7 @@ width0pt\relax} \fi % into the usual \leavevmode...\vrule stuff for purposes of % printing. So we \turnoffactive for the \refx-snt, back on for the % printing, back off for the \refx-pg. - {\normalturnoffactive + {\normalturnoffactive \otherbackslash % Only output a following space if the -snt ref is nonempty; for % @unnumbered and @anchor, it won't be. \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% @@ -5836,58 +5838,56 @@ width0pt\relax} \fi % [mynode], [\printednodename],\space % page 3 - \turnoffactive \putwordpage\tie\refx{#1-pg}{}% + \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}% \fi \endlink \endgroup} % \dosetq is the interface for calls from other macros -% Use \normalturnoffactive so that punctuation chars such as underscore -% and backslash work in node names. (\turnoffactive doesn't do \.) +% Use \turnoffactive so that punctuation chars such as underscore +% and backslash work in node names. \def\dosetq#1#2{% {\let\folio=0% - \normalturnoffactive + \turnoffactive \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}% - \iflinks - \next - \fi + \iflinks \next \fi }% } -% \internalsetq {foo}{page} expands into -% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...} -% When the aux file is read, ' is the escape character - -\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}} - -% Things to be expanded by \internalsetq +% \internalsetq{foo}{page} expands into +% CHARACTERS @xrdef{foo}{...expansion of \Ypage...} +\def\internalsetq#1#2{@xrdef{#1}{\csname #2\endcsname}} +% Things to be expanded by \internalsetq. +% \def\Ypagenumber{\folio} - \def\Ytitle{\thissection} - \def\Ynothing{} - \def\Ysectionnumberandtype{% -\ifnum\secno=0 \putwordChapter\xreftie\the\chapno % -\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno % -\else \ifnum \subsubsecno=0 % -\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno % -\else % -\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno % -\fi \fi \fi } + \ifnum\secno=0 + \putwordChapter@tie \the\chapno + \else \ifnum\subsecno=0 + \putwordSection@tie \the\chapno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno + \else + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} \def\Yappendixletterandtype{% -\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}% -\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno % -\else \ifnum \subsubsecno=0 % -\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno % -\else % -\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno % -\fi \fi \fi } - -\gdef\xreftie{'tie} + \ifnum\secno=0 + \putwordAppendix@tie @char\the\appendixno{}% + \else \ifnum\subsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno + \else + \putwordSection@tie + @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} % Use TeX 3.0's \inputlineno to get the line number, for better error % messages, but if we're using an old version of TeX, don't do anything. @@ -5900,10 +5900,11 @@ width0pt\relax} \fi % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. % If its value is nonempty, SUFFIX is output afterward. - +% \def\refx#1#2{% {% - \indexdummies + \indexnofonts + \otherbackslash \expandafter\global\expandafter\let\expandafter\thisrefX \csname X#1\endcsname }% @@ -5929,12 +5930,7 @@ width0pt\relax} \fi % This is the macro invoked by entries in the aux file. % -\def\xrdef#1{\begingroup - % Reenable \ as an escape while reading the second argument. - \catcode`\\ = 0 - \afterassignment\endgroup - \expandafter\gdef\csname X#1\endcsname -} +\def\xrdef#1{\expandafter\gdef\csname X#1\endcsname} % Read the last existing aux file, if any. No error if none exists. \def\readauxfile{\begingroup @@ -5965,9 +5961,7 @@ width0pt\relax} \fi \catcode`\^^]=\other \catcode`\^^^=\other \catcode`\^^_=\other - \catcode`\@=\other - \catcode`\^=\other - % It was suggested to define this as 7, which would allow ^^e4 etc. + % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc. % in xref tags, i.e., node names. But since ^^e4 notation isn't % supported in the main text, it doesn't seem desirable. Furthermore, % that is not enough: for node names that actually contain a ^ @@ -5980,6 +5974,9 @@ width0pt\relax} \fi % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter % and then to call \auxhat in \setq. % + \catcode`\^=\other + % + % Special characters. Should be turned off anyway, but... \catcode`\~=\other \catcode`\[=\other \catcode`\]=\other @@ -5991,7 +5988,9 @@ width0pt\relax} \fi \catcode`\$=\other \catcode`\#=\other \catcode`\&=\other + \catcode`\%=\other \catcode`+=\other % avoid \+ for paranoia even though we've turned it off + % % Make the characters 128-255 be printing characters {% \count 1=128 @@ -6001,17 +6000,18 @@ width0pt\relax} \fi \ifnum \count 1<256 \loop \fi }% }% - % The aux file uses ' as the escape (for now). + % % Turn off \ as an escape so we do not lose on % entries which were dumped with control sequences in their names. - % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ + % For example, @xrdef{$\leq $-fun}{page ...} made by @defun ^^ % Reference to such entries still does not work the way one would wish, % but at least they do not bomb out when the aux file is read in. + \catcode`\\=\other + % + % @ is our escape character in .aux files. \catcode`\{=1 \catcode`\}=2 - \catcode`\%=\other - \catcode`\'=0 - \catcode`\\=\other + \catcode`\@=0 % \openin 1 \jobname.aux \ifeof 1 \else @@ -6314,15 +6314,6 @@ should work if nowhere else does.} \setemergencystretch } -% Use `small' versions. -% -\def\smallenvironments{% - \let\smalldisplay = \smalldisplayx - \let\smallexample = \smalllispx - \let\smallformat = \smallformatx - \let\smalllisp = \smalllispx -} - % @letterpaper (the default). \def\letterpaper{{\globaldefs = 1 \parskip = 3pt plus 2pt minus 1pt @@ -6350,7 +6341,6 @@ should work if nowhere else does.} \hfuzz = 1pt \contentsrightmargin = 0pt \defbodyindent = .5cm - \smallenvironments }} % Use @afourpaper to print on European A4 paper. @@ -6397,8 +6387,6 @@ should work if nowhere else does.} \contentsrightmargin = 0pt \defbodyindent = 2mm \tableindent = 12mm - % - \smallenvironments }} % A specific text layout, 24x15cm overall, intended for A4 paper. @@ -6539,14 +6527,20 @@ should work if nowhere else does.} \catcode`\@=0 -% \rawbackslashxx output one backslash character in current font +% \rawbackslashxx outputs one backslash character in current font, +% as in \char`\\. \global\chardef\rawbackslashxx=`\\ -%{\catcode`\\=\other -%@gdef@rawbackslashxx{\}} -% \rawbackslash redefines \ as input to do \rawbackslashxx. +% \rawbackslash defines an active \ to do \rawbackslashxx. +% \otherbackslash defines an active \ to be a literal `\' character with +% catcode other. {\catcode`\\=\active -@gdef@rawbackslash{@let\=@rawbackslashxx }} + @gdef@rawbackslash{@let\=@rawbackslashxx} + @gdef@otherbackslash{@let\=@realbackslash} +} + +% \realbackslash is an actual character `\' with catcode other. +{\catcode`\\=\other @gdef@realbackslash{\}} % \normalbackslash outputs one backslash in fixed width font. \def\normalbackslash{{\tt\rawbackslashxx}} @@ -6555,18 +6549,23 @@ should work if nowhere else does.} % Used sometimes to turn off (effectively) the active characters % even after parsing them. -@def@turnoffactive{@let"=@normaldoublequote -@let\=@realbackslash -@let~=@normaltilde -@let^=@normalcaret -@let_=@normalunderscore -@let|=@normalverticalbar -@let<=@normalless -@let>=@normalgreater -@let+=@normalplus -@let$=@normaldollar}%$ font-lock fix - -% Same as @turnoffactive except for \. +@def@turnoffactive{% + @let"=@normaldoublequote + @let\=@realbackslash + @let~=@normaltilde + @let^=@normalcaret + @let_=@normalunderscore + @let|=@normalverticalbar + @let<=@normalless + @let>=@normalgreater + @let+=@normalplus + @let$=@normaldollar %$ font-lock fix +} + +% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of +% the literal character `\'. (Thus, \ is not expandable when this is in +% effect.) +% @def@normalturnoffactive{@turnoffactive @let\=@normalbackslash} % Make _ and + \other characters, temporarily. -- cgit v1.2.3-54-g00ecf